Anyone please.??????​

Hi there!

Since the crate is being slid at a constant speed, the forces sum to 0 N. In this instance, the following forces occur in the axis of interest:

Wsinθ = downward acceleration along incline due to gravity (N)

Fκ = kinetic friction force along incline (N)

A = applied force (N)

The acceleration due to gravity and friction force act in the same direction, so:

Wsinθ + Fκ = A

Solve for sinθ using right triangle trigonometry:

sinθ = O/H = 3/6 = 0.5

Rearrange the equation for the force of kinetic friction and solve:

Fκ = A - 0.5W

Fκ = 30.4 - 20 = 10.4 N

Now, recall that:

Work = Force × displacement (W = F × d)

Since the box's displacement is in the same axis as the force but OPPOSITE direction, we must use:

W = Fdcosθ

Angle between displacement and friction force is 180°.

cos(180) = -1

Work done by friction = -Fd = -10.4(6) = -62.4 J

If the wave velocity and frequency of a wave are both doubled, the wavelength will remain the same.

The wavelength of a wave shows the spatial orientation of distance between two successive crest in a wave medium.

The wavelength λ is expressed by using the relation:

[tex]\mathbf{\lambda = \dfrac{v}{f}}[/tex]

Now, if velocity and  frequency of wave is both doubled, the wavelength will   remain the same.

Learn more about wavelength here:

https://brainly.com/question/10750459

Answer:2.86seconds

Explanation:

H=gt^2/2

t=2h/g

Trigonometry allows to find the result for the question about the height of the mountain is:

Trigonometry allows finding relationships between the angles of a right triangle.

         [tex]tan \theta = \frac{y}{x}[/tex]  

Where θ is the angle, y the opposite leg (height) and x the adjacent leg (horizontal distance).

In the attachment we can see a diagram of the system. They indicate that for x  distance the angle is 14.67º  

         tan 14.67 = [tex]\frac{y}{x}[/tex]  

At the other point the angle is 10.38º.

        tan 10.38 = [tex]\frac{y}{x+15860}[/tex]

We look for the horizontal distance (x) with these equations.

        x tan 14.67 = (x + 15860) tan 10.38

        x tan 14.67 / tan 10.38 = x + 15860

        x 1,429 = x + 15860

        x 0.429 = 15860

        x = [tex]\frac{15680}{0.429}[/tex]

        x = 36955.3 ft

We calculate for the height.

        y = x tan 14.67

        y = 36955.3 tan 14.67

        y = 9674.4 ft

In conclusion using trigonometry we can find the result for the height of the mountain is:

Learn more about trigonometry here: https://brainly.com/question/8120556

Answer:

Both will hit the ground at the same time.

Answer:

Energy conservation relies on people cutting back on activities that consume energy—by turning off lights or driving less or using appliances less often.

Explanation:

hope this helps

Answer:

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 284 × 9 = 2556

We have the final answer as

Hope this helps you

After the series of powerful storm systems of the 2005 Atlantic hurricane season, as well as after Hurricane Patricia, a few newspaper columnists and scientists brought up the suggestion of introducing Category 6, and they have suggested pegging Category 6 to storms with winds greater than 174 or 180 mph (78 or 80 m/s).

Answer:

ch3sh + 4O2 are the products

Answer:

Compound 'A' C5H12 does not react with phenyl hydrazine. Oxidation of 'A' with K2Cr2o7,/H" gives B' (c5H10o). Compound 'B' reacts with phenyl hydrazine but does not give Tollen's test. The

Answer:

Synthesis reactions are chemical reactions where two elements combine to make a product. Decomposition reactions are chemical reactions where a reactant produces another product, usually two, or even more. This is when the bonds in the compound are broken apart to make new compounds.

Explanation:

Answer:

Terms in this set (7) Which element forms more compounds than all the other elements combined? Carbon.

Explanation:

Hope its helps you ✌️

Answer:

first number is 113 and the second number is 15

An object is definitely being accelerated when a nonzero net force is acting on it: Option B.

A net force refer to the vector sum of all the forces that are acting on an object or physical body. Thus, a net force is a single force that substitutes the effect of all the forces acting on an object or physical body.

According to Newton's Second Law of Motion, the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to its mass.

This ultimately implies that, an object is definitely being accelerated when a nonzero net force is acting on it.

Read more on acceleration here: https://brainly.com/question/1121817

Answer:

Answer is 1000kg

Hope it help

Answer:

Question one is b, Question two is b, and question three is b, im pretty positive that what it is

Answer:

The distance of one lap on this track from the start line to the finish line is 400 meters. Two laps around the track is 800 meters, half a lap is 200 meters, and so on.

    Remember, displacement is the direction from the starting point and the length of a straight line from the starting point to the ending point. If a runner was going to run 400 meters (one lap around the track), they would start and stop at the same place on the track. Therefore, their displacement would be 0.

Explanation:

hope this helped

Answer:

[tex]\boxed {\boxed {\sf Gabi \ had \ greater \ displacement}}[/tex]

Explanation:

Displacement is the change in the position of an object.

Abigail runs a complete lap around the track, which is 400 meters. Even though she ran 400 meters, she has no displacement. If she starts and ends at the same spot, there is no change in position.

Gabi runs a 50 meter dash in a straight line. Gabi has 50 meters of displacement. She runs in a straight line and is 50 meters away from where she began.

While Abigail ran the farther distance, Gabi had the greater displacement.

Convert second term into kg

131 = 0.131

Term has become:

2.52 + 0.131

The total is:

2.651 kg

Answer:

3^15 / 3^3 = 3^12 * 3^3 / 3^3 = 3^12

The Law of Exponents applies here

3^15 x 3^3 is a product, not a quotient

3^15 x 3^3 = 3^18

Answer:

I think A

Explanation:

Answer:

The term "solar collector" commonly refers to a device for solar hot water heating, but may refer to large power generating installations such as solar parabolic troughs and solar towers or non water heating devices such as solar air heaters. radiant energy is the energy of electromagnetic and gravitational radiation.Active solar heating systems use solar energy to heat a fluid;either liquid or air; and then transfer the solar heat directly to the interior space or to a storage system for later use. If the solar system cannot provide adequate space heating, an auxiliary or back-up system provides the additional heat.

Answer:

Friction is a force that tends to oppose the relative motion between two bodies in contact. Frictional force always acts on a moving body from the direction opposite to the direction of motion. It opposes the motion, and therefore, helps to reduce the speed of the moving object. It is a contact force.

Explanation:

1. A

2. B

3. I don't know this one but my guess is b

A black hole forms as a star collapses when it ceases emitting radiation from fusion reactions. This occurs after the star has consumed hydrogen, helium, then through iron.

Star evolution refers to the process by which stars evolve (change) over time.

A black hole can be defined as a collapsed star where the gravitational field in its nucleus becomes greater than particles cannot escape from it.

In consequence, black holes are cosmic bodies in which gravity is so powerful that nothing (i.e., particles, radiation, light, etc.) can escape from them.

Nuclear fusion refers to the energy reactions produced by the fusion of hydrogen at the core of a star, thereby becoming helium.

Learn more about black holes here:

https://brainly.com/question/10597324

Answer:

The Production Possibilities Curve (PPC) is a model that captures scarcity and the opportunity costs of choices when faced with the possibility of producing two goods or services. Points on the interior of the PPC are inefficient, points on the PPC are efficient, and points beyond the PPC are unattainable.

Explanation:

Answer: the group in an experiment that doesn’t get treatment

Explanation:

Answer:

The fibers of the sweater lose electrons.