anything that has mass and occupies space is called

Answers

Answer 1
Anything that has mass and occupies space is called matter.Matter is of three types:SolidLiquidGas

Answer:

Matter

Hope you could get an idea from here.

Doubt clarification - use comment section.


Related Questions

A 0.24 kg mass with a speed of 0.60 m/s has a head-on collision with a 0.26 kg mass that is traveling in the opposite direction at a speed of 0.20 m/s. Assuming that the collision is perfectly inelastic, what is the final speed of the combined masses?

Answers

The final speed of the combined masses is 0.21 m/s

Applying the law of conservation of momentum:

Total momentum before collision = Total momentum after collision.

⇒ Formula:

MU+mu = V(M+m).................. Equation 1

⇒ Where:

M = mass of the first bodym = mass of the second bodyU = Initial speed of the first bodyu = Initial speed of the second bodyV = common final speed.

From the question,

⇒ Given:

M = 0.24 kgU = 0.60 m/sm = 0.26 kgu = -0.20 m/s (traveling in opposite direction)

⇒ Substitute these values into equation 1

0.24(0.6)+0.26(-0.20) = V(0.24+0.2)

⇒ Solve for V

0.144-0.052 = 0.44V0.44V = 0.092V = 0.092/0.44V = 0.209V ≈ 0.21 m/s

Hence the final speed of the combined masses is 0.21 m/s

Learn more about speed here: https://brainly.com/question/4931057

Which best describes why a liquid needs a container when a solid does not?
O Solids fill their containers, and liquids have definite shapes.
Solids have definite shapes, and liquids fill their containers.
Solids particles will expand to fill their containers, and liquid particles will expand as well.
O Solids particles expand to fill their containers, and liquid particles do not.

Answers

Answer: Solids have definite shapes and liquids fill their containers.

Explanation: Liquids have got further apart molecules than solids, so the liquid molecules have a higher degree of locomotion than solid molecules, hence able to fill the container though without a definite volume, which is not the case for solid molecules.

1) A plane takes off from an O'Hare runway heading due west with a speed of 210.1 m/s. Once in the air, it encounters a north wind (blowing south) with a speed of 55.0 m/s. What is the magnitude of its velocity relative to the ground?

2) What is the direction of the resulting velocity (relative to its initial direction)?

Answers

I found this online Idek if it helps but First, determine how many degrees off the runway heading the reported wind is. So if you’re landing Runway 18 and the wind is 160 at 10, the wind is 20 degrees off the runway (180-160=20) . Now picture an analog clock face. How far is the wind angle number in minutes around the clock face? A wind angle of 20 degrees means 20 minutes around the clock face, which is one-third of the way around the clock face The crosswind component is one-third of the total wind. In this example, 10 knots * 1/3 = 3.3 knots of crosswind.

If you like charts, you can lay out common numbers and interpolate between them:

10-degree wind angle 10 minutes, which is 1/6 around clockface crosswind = 1/6 * total wind
15-degree wind angle 15 minutes, which is 1/4 around clockface crosswind = 1/4 * total wind
20-degree wind angle 20 minutes, which is 1/3 around clockface crosswind = 1/3 * total wind
30-degree wind angle 30 minutes, which is 1/2 around clockface crosswind = 1/2 * total wind
45-degree wind angle 45 minutes, which is 3/4 around clockface crosswind = 3/4 * total wind
60-degree wind angle or more 60 minutes, which is 100 percent of the way around a clockface crosswind component ≈ total wind speed

How much work is done when mass of 3kg(weighing 30N)is lifted vertically through 6m?

Answers

Answer:

180 [J].

Explanation:

1) the required work [W] can be calculated as difference of the energy: W=E₂-E₁, where E₁=mgh₁ - the energy before lifting, E₂=mgh₂ - the energy after lifting;

2) W=mgh₂-mgh₁, where m - mass; g=10 [N/kg], h - height;

3) then the required work [W]:

W=mg*(h₂-h₁)=30*6=180 [J].

Explain Body Mechanics.
PLUS BRAINLY! and 50 Points

Answers

Answer Body mechanics is a term used to describe the ways we move as we go about our daily lives. It includes how we hold our bodies when we sit, stand, lift, carry, bend, and sleep. ... Good body mechanics means using the body's strength to the best mechanical advantage to do a task efficiently and without injury.

Explanation:

how many asteroids do scientists believe exist in the solar system?

Answers

Answer:

Astronomers think there are between 1.1 and 1.9 million asteroids in the solar system.

Explanation:

a bullet is fired out of a gun up at an angle with the horizontal. if its initial horizontal velocity is 10m/s what is the most likely horizontal velocity after two seconds

Answers

Hi there!

[tex]\large\boxed{10 m/s}}[/tex]

When a projectile is launched, the HORIZONTAL component remains constant.

The force of gravity only changes the vertical component of the velocity.

As the two components are completely independent of one another, the horizontal component is UNCHANGED.


El. A horizontally directed force of 40 N is used to pull a box a distance of 2.5 m across a tabletop. How much work is done by the 40 - N force?

E2. A woman does 160 J of work to move a table 4 m across the floor. What is the magnitude of the force that the woman applied to the table if this force is applied in the horizontal direction?

E3. A force of 60 N used to push a chair across a room does 300 J of work. How far does the chair move in this process?

E4. A rope applies a horizontal force of 180 N to pull a crate a distance of 2 m across the floor. A frictional force of 120 N opposes this motion.

a. What is the work done by the force applied by the rope?

b. What is the work done by the frictional force?

c. What is the total work done on the crate?​

Answers

The same formula of work can be applied to all the questions. The answers are:

E1. 100J

E2. 40N

E3. 5m

E4. a.) 360 J           b.) 240 J               c.) 120 J

El. If a horizontally directed force of 40 N is used to pull a box a distance of 2.5 m across a tabletop. The formula to get the much work that will be done by the 40 - N force will be

Work done = force x distance

Work done = 40 x 2.5

Work done = 100 J

E2. If a woman does 160 J of work to move a table 4 m across the floor. We will use the same formula to calculate the magnitude of the force that the woman applied to the table assuming the force is applied in the horizontal direction.

Work done = force x distance

160 = 4F

F = 160/4

Force F = 40 N

E3. Given that a force of 60 N used to push a chair across a room does 300 J of work. Same formula to get how far the chair move in this process.

Work done = force x distance

300 = 60 x distance

distance = 300/60

Distance = 5 m

Therefore, the chair moved 5m away.

E4. Given that a rope applies a horizontal force of 180 N to pull a crate a distance of 2 m across the floor. And a frictional force of 120 N opposes this motion.

a. The work done by the force applied by the rope can  be found by

W = F x S

W = 180 x 2

W = 360 J

b. What is the work done by the frictional force?

W = [tex]F_{r}[/tex] x s

W = 120 x 2

W = 240 J

c. What is the total work done on the crate?

W = (F - [tex]F_{r}[/tex]) x distance

Where  [tex]F_{r}[/tex]  = frictional force

Substitute all the parameters

W = (180 - 120) x 2

W = 60 x 2

W = 120 J

Learn more about work here: https://brainly.com/question/8119756

Maria drove 100 miles in 2 hrs. what was marias speed?​

Answers

50 miles per hour was Maria’s speed

You are looking at a yellow flower growing outside in the sunshine. Why does it look yellow?

Answers

Answer:

It looks yellow because that is the only (major) color reflected.

Visible spectra is from about 4000-7000 Angstroms (10^-10 m).

Red are longer wavelengths and blue are the shorter wavelengths.

The Sodium doublet (yellow) occurs around 5900 Angstroms.

15. Find the density of a certain object that has the dimensions 2cm x 6cm x 7cm and a
mass of 42g.
16. What is the volume of a container of liquid that has a density of 120g/ml and a mass
of 17g.
17. If the mass of an object has a mass of 23g and a volume 123ml, what is its density.
“Express your answer in Kg/ml!"
18. What is the volume of a cubed object with a measure of 12cm on one of its sides, if
the mass of that same object is 45g and its density is 240g/cm3?
19. An object with a density of 3g/ml is placed into a body of water. Since the density of
water is 1g/ml, will this object sink or float.

Answers

This question is asking for five different questions about density, mass and volume which can be all summarized with the following definition of density as the degree of compactness of the objects taken into consideration:

[tex]\rho =\frac{m}{V}[/tex]

In such a way, we can proceed as follows:

15. the mass is given as 42 g and the volume can be found by multiplying the given dimensions:

[tex]V=2cm*6cm*7cm=84 cm^3[/tex]

And the density turns out to be:

[tex]\rho =\frac{42g}{84cm^3}=0.5 g/cm^3[/tex]

16. both mass and density are given as 17 g and 120 g/mL respectively, so that we have to solve for the volume as shown below:

[tex]V=\frac{m}{\rho} =\frac{17g}{120g/mL} =0.14 mL[/tex]

17. the mass is given as 23 g and the volume as 123 mL, so that the density is calculated as shown below:

[tex]\rho=\frac{23g}{123 mL} =0.19 g/mL[/tex]

Which can be converted to kg/mL as follows:

[tex]0.19\frac{g}{mL} *\frac{1kg}{1000g}=0.00019 kg/mL[/tex]

18. the mass is given as 45 g and the density as 240 g/cm³, so we can solve for the volume as follows:

[tex]V=\frac{m}{\rho} =\frac{45g}{240g/cm^3}=0.19 cm^3[/tex]

19. In this case, since the water has lower density than the object, we can infer that the latter is heavier than the former, this means that the object will sink according to the Archimedes principle.

Learn more:

(Density) https://brainly.com/question/952755

A projectile with an initial velocity of 48 feet per second is launched from a building 190 feet tall. The path of the projectile is modeled using the equation h(t) = â€""16t2 48t 190. Approximately when will the projectile hit the ground? 1. 5 seconds 3. 2 seconds 5. 3 seconds 6. 2 seconds.

Answers

The time for the projectile to hit the ground from the given position is 1.5 s.

The given parameters:

Initial velocity of the projectile, u = 48 ft/sHeight, h = 190 ftModel of the projectile path, h(t)  = –16t² + 48t + 190.

The time for the projectile to hit the ground is calculated as follows:

when the projectile hits the ground, the final velocity = 0

[tex]v_f = 0\\\\\frac{dh(t)}{dt} = v_f\\\\\frac{dh(t)}{dt} = -32t + 48\\\\-32t+48 = 0\\\\32t = 48\\\\t = \frac{48}{32} \\\\t = 1.5 \ s[/tex]

Thus, the time for the projectile to hit the ground from the given position is 1.5 s.

Learn more about time of motion of projectiles here: https://brainly.com/question/13533552

Which of the following is an example of physical weathering?
O calcium carbonate in limestone changes to calcium hydrogen carbonate
O flow water carves erosion channels in a hillside
Ostalactites precipitate in a cave
O acid rain corrodes a monument

Answers

Answer:

acid rain corrodes a monument. d.

Explanation:it only makes sense because its doing something to a physical object.and the other ones aren't.

what are the electrical signals generated by neurons called?

Answers

Answer:

electrons

Explanation:

because it electrons



A roller coaster goes from 2.00 m/s [forward] to 10.0 m/s [forward) in 4.50 s. What is its acceleration?

Answers

The answer would be 1.77778:

We must use the kinematic equation v = v0 + at, then fill in the elements given and solve which equals 1.77778

In a 200.0-m relay race (each leg of the race is 50.0 m long), one swimmer has a 0.450 second lead
and is swimming at a constant speed of 3.90 m/s towards the opposite end of the pool. What minimum
speed must the second swimmer have in order to catch up with the first swimmer by the end of the
pool?

Answers

The minimum  speed that the second swimmer must have in order to catch up with the first swimmer by the end of the  pool is; 4.04 m/s

We are given the following facts;

Both swimmers swim the same distance of 50 m for a leg of the relay race.Swimmer 1 swims at constant speed of 3.9 m/s. Swimmer 1 has a 0.450 second head start.

Formula for time taken is;

time = distance/speed

Time taken by swimmer 1 for one leg;

t₁ = 50/3.9

t₁ = 12.82 s

Since swimmer 1 has a head start of 0.45 s, then time that swimmer 2 must use in order to catch up is;

t₂ = 12.82 -0.45

t₂ = 12.37 s

Thus, speed of swimmer 2;

v = 50/12.37

v = 4.04 m/s

Read more about distance, speed and time at; https://brainly.com/question/24571540

The decomposition of dinitrogen pentoxide is described by the reaction: 2N2O5(g)→4NO2(g)+O2(g). If O2 is being formed at a rate of 2.40 mol/min, what is the rate at which N2O5 is being used up?

Answers

Answer:

4.80 mol N2O5/min

Explanation:

The balanced equation tells us that 2 moles of N2O5 are required for every 1 mole of O2.  Therefore:

(2.40 mol O2/min)*(2 mol N2O5/mol O2) = 4.80 mol N2O5/min

what happens to the state of motion of the object, when you don't exert a force on it???​

Answers

Answer: It eventually loses its stamina, and would come to a stop.

Explanation:

What event will produce the greatest increase in the gravitational force between the two masses?

Question 5 options:

Doubling the distance between the masses


Reducing the small mass by half


Doubling the large mass


Reducing the distance between the masses by half

Answers

Answer:

Doubling the large mass

Explanation:

Doubling the destance bewteen the masses will simply make the gravitational force weaker

same with every answer exce

Event will produce the greatest increase in the gravitational force between the two masses is Doubling the large mass.

What is force?

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Gravitational force is directly proportional to product of mass and inversely proportional to product of distance between them. So, on increasing heaver mass greatest increase in the gravitational force.

Event will produce the greatest increase in the gravitational force between the two masses is Doubling the large mass.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ6

A construction crew is paving a road. The crew has already paved 1,000 square feet and can pave at a rate of 300 square feet of road per hour. The function f(x) = 300x 1,000 represents this situation. What is f(3), and what does it represent?.

Answers

f(3) represents the number of additional square feet the construction crew has paved after 3 hours, not including the initial paved amount.

Mathematical models are representations of real situations. Models often serve the purpose of prediction and can help to explain and simplify certain mathematical problems.

The model; f(x) = 300x + 1,000 represents the number of additional square feet that can be paved in an hour after 1,000 square feet has already been paved.

From the above we can see that the correct answer is; "900 square feet; f(3) represents the number of additional square feet the construction crew has paved after 3 hours, not including the initial paved amount."

Learn more: https://brainly.com/question/731147

is orange orange because its orange or is orange orange because its orange

Answers

Answer:

orange it is lol

Explanation:

Answer:

HELP ORANGE DOESNT LOOK LIKE A WORD ANYMORE

Explanation:

Heat always moves from hot to cold through the processes of?

Answers

Answer: The processes are conduction, convection and radiation.

Explanation: Unless people interfere, thermal energy — or heat — naturally flows in one direction only: from hot toward cold. Heat moves naturally by any of three means. The processes are known as conduction, convection and radiation. Sometimes more than one may occur at the same time.

Anyone please help thank you

Answers

Answer:

A) earth

B) live

C) live

D) earth

Explanation:

hope i help

compared to spiral galaxies, elliptical galaxies are:

Answers

flat disk like shape

________________

o0o0o0o0o0o0o0o0

Name the force used in removing iron scrap from a heap of mixed scrap. (a) Magnetic Force (b) Electrostatic force (c) Gravitational force (d) Friction Force​

Answers

Answer:

magnetic force

Explanation:

because iron is magnetic so magnet is able to attract iton

Given an unknown metal using C= {Q/(M T)} with energy added of 8,000. J, in which the temperature goes from 24.0 C to 28.0 C at a mass of 46.0 g, find its specific heat capacity?​

Answers

Answer:

47.48 J/g/K or 4.74 × 10⁴J/Kg/K

Explanation:

C(specific heat capacity)= Q(quantity of heat)/M(mass) × ∆T(change in temperature, Kelvin)

Q= 8000J

M= 46g or 46 ×10^-3Kg

T1= 24°C = 297K

T2 = 28°C = 301K

∆T = 301-297

= 4K

C= 8000/46 × 4

= 47.48 J/g/K or 4.74 × 10⁴J/Kg/K

9- Under what circumstances would a vector have components that are equal in
magnitude?
a. if the vector is oriented at 45° from the axes.
b. if the vector is oriented at 90° from the axes.
c. if the vector is oriented at 0° from the X -axis.
d. if the vector is oriented at 0° from the y-axis.
itude of 30 units Vector B is perpendicular to vector A

Answers

Explanation:

c. if the vector is oriented at 0° from the X -axis.

A book with a. mass of 1 kg is sliding on a table. If the frictional force on the book is 5 N, calculate the book’s acceleration. Is it speeding up or slowing down?

Answers

Force = mass x acceleration:

5N = 1kg x acceleration

Acceleration = 5N / 1 kg

Acceleration  = 5 m/s^2

Acceleration is a positive value so it is speeding up

You're driving your pickup truck around a curve with a radius of 22 m. A box in the back of the truck is pressed up against the wall of the truck. How fast must you drive so that the force of the wall on the box equals the weight of the box?

Answers

Answer:

Explanation:

Centrifugal force Fc = m x v2 / r

Weight  = mg

As required by the question

Fc = W

v2 /r = g

given radius r = 22 m

v2 /22 = 9.8

Solve for v

required speed v = √(22 * 9.8)

= 14.35 m/s

v=15 m/s

this may help you

The force of the wall on the box equals the weight of the box when you drive with a speed of 14.68 m/s.

What is centrifugal force?

The centrifugal force can be described as an inertial force that appears to act on all objects in a rotating frame of reference. This force is directed away from an axis that is parallel to the axis of rotation and passes through the coordinate system's origin.

The magnitude of centrifugal force of mass m at the distance r from the origin rotating with angular velocity ω is:

[tex]{\displaystyle F=m\omega ^{2}r}[/tex]

Given, the radius of the curve, r = 22m

The acceleration, a = v²/r

The weight of the box, W = mg

We know that, F = ma

mg = m(v²/r)

v = √gr

[tex]\displaystyle v =\sqrt{9.8 \times 22}[/tex]

v = 14.68 m/s

Therefore, you should drive at a speed of 14.68 m/s

Learn more about centrifugal force, here:

https://brainly.com/question/17167298

#SPJ2

A calculator of mass 0.11 kg is lowered from a bookshelf that is 1.6m above the floor to a desk that is 0.85m above the floor. What's the change in GPE?

Answers

Answer:

I think it would be 0.1496 but I'm not really sure sorry

Other Questions
WILL GIVE BRAINLIEST IF UR RIGHTT!!Which of these options is an ineffective claim?Grades a great way to measure learning.I think that students should be able to grade their teachers. Grades are irrelevant to actual learning. Grading, while not the best way to measure learning, is the only practical way to measure learning on a large scale. Add the following: (i) 2a+b+c, a - b -c, 3a + b If a car is traveling 100 km/h and comes to a stop in 3 minutes,what is acceleration of a passenger who is using vehicle restraint? 1. What are hand tools ? *1 point2. Give one example and one use of the following handtools I. Measuring tool II. Cutting Tool III. Striking tool *6 points3. Name the hand tool used to drive nails *1 point4. Name the hand tool used to cut plastic and metal pipes *1 point5. Which hand tool is used to clamp your work piece to the work table ? *1 point6. What are portable power tools? *1 point7. Name the power tools used to carryout the following operations I. Boring holes II. Cutting curves III. Sanding *3 points8. List three examples of stationary machines *3 points Based on the information in the table, how much will Henry earn if he worked 7 hours?A$48+B$72$9D$63 Which type of circuit would be best to use for lights used for decorations? Eva earns $5.50 per hour and time-and-a-half for overtime for all hours over 40 hours. How much did she earn the week she worked 47 hours? According to Hebrews 11, what did Abraham believe God would do if Isaac was slain as a sacrifice? It is estimated that __________ percent of adults in the united states have a cell phone. in the twelve days of christmas, there are how many drummers drumming? Arrange in descending order: 101.121, 111.101, 101.112, 110.111 In Substitution 3+2x-y=0-3-7y=10X What geographic factor influenced the changing political borders in the Indus River Valley?developments in transportationdamages from natural disastersconflict over control of waterwaystechnological advancements in farming 50 points for anyone who answeres properly. How does a structure of a triglyceride differ from the reaction of fructose? Triglycerides and fructose are both monomers, but they differ in how they bond to other monomers. Fructose forms large polymers by the process of hydrolysis, while a triglyceride forms monomers by the process of dehydration. Fructose is a form of carbohydrate, while a triglyceride is a lipid. A triglyceride is a polymer, while fructose is a monomer. Anthony wants to get a new TV. He has been working hard as a busboy at the local restaurant and wantsto treat himself to something nice. Today is his lucky day as he finds a 60" TV in stock that he has beenlooking for. Unfortunately, it costs $700, and he does not have enough money saved up in order to buy it.He recently received a credit card and is trying to decide what to do. Should he keep saving money buy it Which best explains what figurative language is?A. Language that means something other than the literalB. Language that carries a comic or romantic toneO C. Language that attempts to include no connotationO D. Language that refers to things experienced through the senses The process of erosion can best be described as the movement of weathered materials by: Select the answers that best match for that political party's beliefs. -7ab + 6b - 3ab - 4b - 3ab Can someone please help me with this and Ill give you a lot of points