at 2.1 km from the transmitter, the peak electric field of a radio wave is 350 mv/m . what is the peak electric field 10 km from the transmitter?

The reason we do not see the lines of hydrogen in the spectra of the hottest stars is due to the ionization of hydrogen atoms at high temperatures.

In these stars, the temperatures are so high that the electrons in the hydrogen atoms are stripped away, leaving behind only the protons. This ionized hydrogen does not produce the same spectral lines as neutral hydrogen, which is what we typically observe in cooler stars. Instead, the spectra of hot stars are dominated by lines from ionized metals, such as helium, carbon, and oxygen. So while hydrogen is indeed the most common element in the universe, its presence in the spectra of hot stars is not as prominent due to ionization.

More on hydrogen: https://brainly.com/question/30077093

#SPJ11

Answer: hope it helps

Explanation:

A protostar becomes a main sequence star when its core temperature exceeds 10 million K. This is the temperature needed for hydrogen fusion to operate efficiently.

The upper limb is the side of the chicken's body did this wing belong to.

Humerus, shoulder, and joint are related to the anatomy of the upper limb. The humerus is the long bone in the upper arm, the shoulder is the joint that connects the arm to the body, and the joint refers to the articulation between bones.

In a chicken, the shoulder joint is located at the junction of the humerus (upper arm bone) and the scapula (shoulder blade). It is a ball-and-socket joint that allows for a wide range of motion in the chicken's wing. The shoulder joint is important for a chicken's ability to fly, flap its wings, and perform other movements that require mobility and stability in the upper limb.

Read more on upper limb here:https://brainly.com/question/6963710

#SPJ1

The distance to the RR Lyrae variable star will be underestimated by a factor of 10 due to the effect of interstellar dust.

The distance to an astronomical object can be determined using the inverse square law, which states that the apparent brightness of an object decreases as the square of the distance increases.

The apparent magnitude of an object is a measure of its brightness as seen from Earth. The lower the magnitude, the brighter the object.

If interstellar dust makes an RR Lyrae variable star look 5 magnitudes fainter than it should, then the apparent magnitude of the star as observed from Earth is 5 magnitudes greater than its true apparent magnitude.

Using the inverse square law, we can write:

Apparent brightness ~ 1 / (distance[tex])^2[/tex]

If the apparent brightness is 5 magnitudes fainter than it should be, we can express the distance to the star as:

distance = sqrt(100^(0.4 * 5)) x true distance

where 0.4 is the conversion factor from magnitudes to brightness ratios, and 100 is the ratio of the brightness of the star as observed from Earth to its true brightness.

Simplifying this expression, we get:

distance = 100^(0.5) x true distance

distance = 10 x true distance

Therefore, the distance to the RR Lyrae variable star will be underestimated by a factor of 10 due to the effect of interstellar dust.

Learn more about  interstellar dust.

https://brainly.com/question/13034266

#SPJ4

When retrograde motion occurs and how it is related to Mars's orbit around the Sun:

Retrograde motion occurs when a planet appears to move backward in the sky from Earth's perspective. In the case of Mars, this happens when Earth overtakes Mars in their respective orbits around the Sun.

To understand when Mars will be in retrograde motion, consider these steps:

1. Picture both Mars and Earth orbiting the Sun, with Mars having a larger, slower orbit due to its greater distance from the Sun.
2. As Earth moves faster in its orbit, it eventually catches up to and passes Mars.
3. During this time, the relative positions of Earth, Mars, and the Sun create the illusion of Mars moving backward in the sky, as seen from Earth.

So, when trying to identify the spot where Mars will be in retrograde motion, look for the point in its orbit where Earth is passing Mars, creating the optical illusion of Mars moving backward in the sky.

To know more about Retrograde motion:

https://brainly.com/question/31026528

#SPJ11

To lift this weight, you would need a force greater than or equal to 3,920 N (assuming you are lifting it vertically).

weight = [tex]1 m^3 \times 400 kg/m^3 \times9.8 m/s^2[/tex]

weight = 3,920 N

Force is a physical quantity that describes the interaction between objects or systems. The SI unit of force is the Newton (N), which is defined as the amount of force required to accelerate a one kilogram mass at a rate of one meter per second squared.

Force is also responsible for deformations in solid objects, such as stretching or compressing a spring. Nuclear forces are responsible for the interactions between subatomic particles, and frictional forces are the forces that resist motion when two surfaces come into contact. Gravitational force is the force that pulls objects towards each other due to their masses. Electromagnetic force is responsible for the interactions between charged particles, such as in electricity or magnetism.

To learn more about Force visit here:

brainly.com/question/24115409

#SPJ4

Answer:

V = λ * ν       speed of wave in medium

We know the speed of a particular wave in a medium is constant.

ν = V / λ

If λ is increased by 3 then the frequency ν will be reduced by a factor of three to keep the speed constant.

ν' = ν / 3

Answer:

C.

Explanation:

When Venus surface get bit cold when weather hits the planet gets soupy clouds and etc.

The nonconservative work done on the surfer is 2845.5 J.

We can use the work-energy theorem to solve this problem. The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy. In this case, we can calculate the initial and final kinetic energies of the surfer and find the difference, which will give us the net work done.

The initial kinetic energy of the surfer is:

[tex]K_i = (1/2) * m * v_i^2[/tex]

[tex]K_i = (1/2) * 73.2 kg * (1.44 m/s)^2[/tex]

K_i = 75.7 J

The final kinetic energy of the surfer is:

[tex]K_f = (1/2) * m * v_f^2[/tex]

[tex]K_f = (1/2) * 73.2 kg * (8.89 m/s)^2[/tex]

K_f = 2921.2 J

The change in kinetic energy is:

ΔK = K_f - K_i

ΔK = 2921.2 J - 75.7 J

ΔK = 2845.5 J

According to the work-energy theorem, this change in kinetic energy must be equal to the net work done on the surfer. Therefore, the nonconservative work done on the surfer is:

W_nc = ΔK

W_nc = 2845.5 J

So, the nonconservative work done on the surfer is 2845.5 J.

Learn more about   nonconservative work

https://brainly.com/question/28588859

#SPJ4

Sonar can be a useful tool for monitoring the hydrosphere, which includes all of the water on and beneath the Earth's surface.

Sonar works by emitting sound waves that bounce off objects in the water, and then measuring the time it takes for the sound waves to return to the source. By analyzing the echoes, scientists can map the seafloor, measure the depth of the water, and even identify the size and location of marine organisms.

Sonar can also be used to monitor the movements of water masses, including ocean currents, tides, and storm surges. This information is important for understanding global climate patterns and predicting the effects of natural disasters

Learn more about global climate

https://brainly.com/question/27919422

#SPJ4

True a significant factor in algal blooms and the excessive growth of aquatic vegetation that results in competition for sunlight and congestion.

Job competition is fierce. Computer firms compete fiercely with one another. The two businesses are in opposition to one another.It can also be described more broadly as the either direct or indirect relationship between species that affects fitness when they share a resource.When there is monopolistic competition, several vendors offer differentiated goods—goods with minor differences but similar functions.

Therefore, every animal, plant, mould, protist, organism, or archaeon found on Earth would be considered an organism. There are numerous methods to categorise these species.a single organism that uses its organs to carry out its life's functions

To know more about organism visit:

https://brainly.com/question/13278945

#SPJ1

B. Power supplies are rated for efficiency based on watts. The efficiency of a power supply is determined by the ratio of its output power (in watts) to its input power (also in watts).

The lesser the  effectiveness, the  lower power is wasted as heat and the lesser the power given to the computer's  factors.   In addition to  effectiveness, power  inventories are rated for maximum affair power, which is generally expressed in watts. This standing represents the loftiest  quantum of power that the power  force can deliver to the computer's  factors.  

Other conditions,  similar as voltage and amperage conditions for their different affair connections, may be assigned to power  inventories. The maximum voltage and current that the power  force can produce on each connection are indicated by these conditions. Ohms, on the other hand, are a resistance unit that's infrequently used to grade power  force.

Learn more about power at

https://brainly.com/question/30562600

#SPJ4

The resistance of each bulb which are connected in series is 20.571 Ω.

Let's find the resistance of each bulb using the given terms:

1. Voltage of source (V_source) = 120 V
2. Number of bulbs (n) = 10
3. Power of each bulb (P) = 7.0 W

We'll use the formula P = V²/R to find the resistance of each bulb.

1: Find the total power of the series.
Total power (P_total) = n * P = 10 * 7.0 W = 70 W

2: Find the total resistance of the series.
Using the formula P_total = V_source^2 / R_total, we can find R_total:
R_total = V_source² / P_total = (120 V)² / 70 W = 14400 / 70 = 205.71 Ω

3: Find the resistance of each bulb.

Since the bulbs are connected in series, the total resistance is the sum of the individual resistances. Therefore, we can find the resistance of each bulb (R_bulb) as follows:

R_bulb = R_total / n = 205.71 Ω / 10 = 20.571 Ω

So, the resistance of each bulb is approximately 20.571 Ω.

Learn more about resistance:

https://brainly.com/question/24858512

#SPJ11

The technique of interferometry allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.

This is achieved by combining the signals received by the telescopes to create a single image with a higher resolution. Interferometry is especially useful for studying objects with small angular sizes, such as stars and planets.

Additionally, interferometry allows astronomers to make astronomical observations without interference from light pollution, as it can separate the signals from the object being observed from the background light.

However, interferometry does not directly determine the chemical composition of stars, although it can provide information about their temperature and other physical properties.

Learn more about interferometry:

https://brainly.com/question/30054443

#SPJ11

The option A is  best representation of the path that the ball would take after the string breaks.

When the string of a pendulum breaks, the ball's path will follow the laws of motion, specifically the law of conservation of energy. As the ball was halfway to its highest position, it had a certain amount of potential energy.

When the string broke, this potential energy would convert to kinetic energy, causing the ball to move in a straight line tangent to the point where the string broke.

Therefore, the path that the ball would take after the string breaks would be a straight line away from the pivot point of the pendulum, as shown in option A. The other paths shown do not follow the laws of motion and do not account for the conservation of energy. Option (A) is the correct answer.

To learn more about : string

https://brainly.com/question/24994188

#SPJ11

Note the full question is

A pendulum is swinging upward and is halfway toward its highest position, as shown, when the string breaks. which of the paths shown best represents the one that the ball would take after the string breaks?

A) A

B) B

C) C

D) D

E) E

The differences between ambient sounds, sound effects, and Foley sounds.

Ambient sounds, also known as background sounds or atmospheric sounds, are the continuous, subtle noises that help create a sense of atmosphere or location in a scene. They differ from sound effects in that sound effects are distinct, purposeful sounds added to emphasize specific actions or events in a scene.

Foley sounds, on the other hand, are a type of sound effect created manually by a Foley artist to match and enhance the actions happening on-screen. They are different from regular sound effects because they are typically recorded live in a studio using various objects and materials to create realistic, synchronized sounds for actions such as footsteps, clothing rustles, and object handling.

In summary:

1. Ambient sounds create a sense of atmosphere or location and are continuous and subtle.
2. Sound effects are distinct, purposeful sounds added to emphasize specific actions or events.
3. Foley sounds are a type of sound effect created manually by a Foley artist to match on-screen actions.

To know more about ambient sounds, sound effects, and Foley sounds:

https://brainly.com/question/16519187

#SPJ11

The i component of the magnetic force on the wire is 1.06 × 10^-13 N. The k component of the magnetic force on the wire is 6.69 × 10^-14 N. The magnitude of the magnetic force on the wire is 1.26 × 10^-13 N.

To calculate the i component of the magnetic force, we use the formula:

F = I * L x B

where I is the current, L is the length of the wire, B is the magnetic field, and x represents the cross product.

The cross product of L and B gives a vector perpendicular to both L and B, which is in the i direction. So we only need to find the magnitude of the cross product and multiply it by I to get Fx.

|L x B| = |L| |B| sinθ

where θ is the angle between L and B. Since L is in the j direction and B has i and k components, we have:

|L x B| = L * Bz = (3.8 × 10^-3 m) * (1.1 × 10^-4 T) = 4.18 × 10^-8 N

Then, Fx = I * |L x B| = (2.54 × 10^-6 A) * (4.18 × 10^-8 N) = 1.06 × 10^-13 N

To calculate the k component of the magnetic force, we use the same formula and take the k component of the cross product:

|L x B|k = |L| |B| sin(π/2) = |L| |B| = (3.8 × 10^-3 m) * (6.9 × 10^-5 T) = 2.63 × 10^-7 N

Then, Fz = I * |L x B|k = (2.54 × 10^-6 A) * (2.63 × 10^-7 N) = 6.69 × 10^-14 N

The magnitude of the magnetic force is given by,

F = sqrt(Fx^2 + Fz^2) = sqrt((1.06 × 10^-13 N)^2 + (6.69 × 10^-14 N)^2) = 1.26 × 10^-13 N

To know more about magnetic force, here

brainly.com/question/3160109

#SPJ4

The new velocity of the less massive train car has a velocity of 10 m/s after the collision.

Velocity is a measure of the rate and direction of an object's motion. It is a vector quantity, meaning it has both magnitude and direction. Velocity is typically represented by the equation v = s/t, where v is the velocity, s is the displacement (or distance travelled), and t is the time taken. Velocity is often confused with speed, which is the measure of the magnitude of an object's motion. Speed is a scalar quantity and is represented by the equation s = t/v.

The total momentum of the two train cars before the collision is calculated by multiplying the mass of each car by its velocity.

The total momentum of the system before the collision is 2000 kg x 10 m/s + 1000 kg x 3 m/s = 23000 kg m/s.

The total momentum of the system after the collision is 2000 kg x 6 m/s + 1000 kg x v, where v is the velocity of the less massive train car after the collision.

Therefore, we can set up the equation 23000 = 12000 + 1000v and solve for v.

v = 10 m/s.

To learn more about velocity

https://brainly.com/question/24445340

#SPJ1

the acceleration of the mass is 0.7212 m/s^2.

To find the acceleration of the mass, we need to first determine the net force acting on it. We can do this by using vector addition to add the two forces together.

Using the Pythagorean theorem, we can find the magnitude of the diagonal force:

sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = sqrt[225 + 100] = sqrt(325) = 18.03 N

The direction of this force can be found using the inverse tangent function:

theta =[tex]tan^{-1}(10.0N/15.0N)[/tex] = 33.69 degrees north of east

We can now use vector addition to find the net force on the mass:

F_net = sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = 18.03 N, at an angle of 33.69 degrees north of east

To find the acceleration of the mass, we can use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration:

F_net = ma

Solving for the acceleration, we get:

a = F_net / m = 18.03 N / 25.0 kg = 0.7212 m/s^2

Therefore, the acceleration of the mass is 0.7212 m/s^2.

Learn more about Vector Addition:

https://brainly.com/question/19420810

Pulsed lasers are used in specific applications where short bursts of laser light are needed, such as in laser ranging, lidar, or certain medical procedures.

What is Wavelength?

Wavelength is a term used in physics to describe the distance between two consecutive points of a wave that are in phase, or the distance over which a wave completes one cycle. It is commonly denoted by the Greek letter lambda (λ) and is usually measured in units such as meters (m), nanometers (nm), or angstroms (Å).

Green laser pointers typically use a type of laser known as a diode-pumped solid-state (DPSS) laser to generate laser light at a wavelength of 532 nm, which corresponds to green light in the visible spectrum. DPSS lasers are a type of laser that uses a solid-state crystal or material as the gain medium, which is pumped by a diode laser to achieve laser emission.

Learn more about Wavelength from the given link

https://brainly.com/question/10750459

#SPJ1

The priority nursing action in this scenario would be to notify the provider.

An epidural anesthesia block can cause a drop in blood pressure in the mother, which can in turn affect the fetal heart rate.

A blood pressure reading of 80/40 mmHg is considered low, and can indicate hypotension.

Hypotension can lead to decreased blood flow to the placenta and fetus, which can result in fetal distress.

Therefore, it is important for the provider to be notified of the low blood pressure reading and fetal heart rate, so that appropriate interventions can be implemented to address the situation.

The provider may choose to adjust the dosage of the epidural anesthesia, administer IV fluids, or consider other measures to stabilize the mother's blood pressure and fetal well-being.

While monitoring vital signs and positioning the client can also be important interventions, they are not the priority in this scenario.

Elevating the client's legs may help to increase blood flow to the heart and improve blood pressure, and placing the client in a lateral position may also help to improve blood flow and prevent supine hypotensive syndrome.

These actions should be taken after the provider has been notified and appropriate interventions have been implemented.

To know more about  epidural anesthesia visit link :

https://brainly.com/question/14205576

#SPJ11

The amplitude of the magnetic field of the electromagnetic wave is 6.53 x 10^-7 T.

To find the amplitude of the magnetic field of an electromagnetic wave, we need to use the relationship between the electric and magnetic fields in an electromagnetic wave.

According to this relationship, the amplitude of the magnetic field is equal to the amplitude of the electric field divided by the speed of light (c). Therefore, if the amplitude of the electric field of an electromagnetic wave is 196 V/m, the amplitude of the magnetic field can be calculated as follows:

Amplitude of magnetic field = Amplitude of electric field / Speed of light
Amplitude of magnetic field = 196 V/m / 3 x 10^8 m/s
Amplitude of magnetic field = 6.53 x 10^-7 T

It is important to note that the amplitude of the magnetic field and the electric field of an electromagnetic wave are perpendicular to each other and are responsible for the wave's propagation through space.

To learn more about : electromagnetic

https://brainly.com/question/13874687

#SPJ11

Color: Both the bromine gas and steak have a brownish color.

Bromine gas is a reddish-brown, nonflammable, and highly toxic gas with a very strong, unpleasant odor. It is composed of two heavy, diatomic, halogen molecules, Br2, and is the only nonmetal element that exists as a liquid at room temperature. Bromine gas is denser than air and is soluble in water and organic solvents.

Texture: The bromine gas is a gas and therefore has no texture, while the steak is solid and has a firm texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the steak, which is at room temperature.
Bromine Gas and Juice:
Color: The bromine gas is brownish and the juice is a yellowish or orange color.
Texture: The bromine gas is a gas and therefore has no texture, while the juice is a liquid and has a smooth texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the juice, which is at room temperature.

To learn more about bromine gas
https://brainly.com/question/1126306
#SPJ1

When thermal energy is applied to a substance, the particles in the substance start to vibrate more rapidly, and the average kinetic energy of the particles increases.

As a result, the temperature of the substance increases. The amount of thermal energy required to increase the temperature of the substance by a certain amount is called the specific heat capacity of the substance.

The way the substance responds to the applied thermal energy also depends on its physical properties, such as its mass, density, and thermal conductivity. For example, a substance with a high thermal conductivity will transfer heat more rapidly to its surroundings, while a substance with a low thermal conductivity will retain heat more effectively.

If the applied thermal energy is sufficient, the substance may undergo a phase change, such as melting or boiling, as the increased kinetic energy overcomes the intermolecular forces holding the particles together.  

Learn more about thermal energy  at

https://brainly.com/question/19666326

#SPJ1

To find the focal length of a convex lens, we can use the formula:
1/f = 1/di + 1/do

Where f is the focal length, di is the distance of the image from the lens, and do is the distance of the object from the lens.

We are given that the student is 2.50m away from the lens, so do = 2.50m. We are also given that the image is 1.80m from the lens, so di = 1.80m.

Plugging these values into the formula, we get:
1/f = 1/1.80 + 1/2.50

Simplifying this equation, we get:
1/f = 0.5556

Multiplying both sides by f, we get:
f = 1.80 / 0.5556

Solving for f, we get:
f ≈ 3.24 meters

Therefore, the focal length of the convex lens is approximately 3.24 meters.

To know more about focal length of a convex lens:

https://brainly.com/question/1031772

#SPJ11

A convex lens is 1.80 meters from a student who is 2.50 meters distant, and its focal length is 1.04 meters.

To solve this problem, we can use the lens equation:

1/f = 1/do + 1/di

where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).

In this problem, the object distance is do = 2.50 m and the image distance is di = 1.80 m. We can plug these values into the lens equation and solve for the focal length:

1/f = 1/do + 1/di

1/f = 1/2.50 + 1/1.80

1/f = 0.4 + 0.56

1/f = 0.96

f = 1/0.96

f ≈ 1.04 meters

Therefore, the focal length of the convex lens is approximately 1.04 meters.

To learn more about focal length, refer:-

https://brainly.com/question/29870264

#SPJ11

The coils in the spring will move farther apart when a current is passed through it because of the solenoid effect.

The solenoid effect describes the way a loose spiral spring expands when a current is fed through it. An electric current flows through a coil of wire to create a solenoid, a type of electromagnet. A magnetic field is produced when current passes through the coil, and the magnetic field lines are parallel to the axis of the coil. The amount of current flowing through the coil and the number of wire turns within the coil determines how strong the magnetic field is.

Because a loose spiral spring behaves like a coil of wire, the solenoid effect is seen in this situation. The magnetic field that is created around a spring when a current is sent through it has lines that are parallel to the spring's axis. The interaction between the magnetic field and the spring's current produces a force that pushes the coils apart.

To learn more about solenoids, refer to:

https://brainly.com/question/4340558

#SPJ4

When a bow is drawn and has 40 J of potential energy, the arrow's kinetic energy when fired will be:

Your answer: d. 40 J

Explanation:

Potential energy is the energy that an object possesses due to its position, configuration, or state of being. It is stored energy that has the potential to do work in the future. The amount of potential energy that an object has depends on its position or configuration relative to other objects or systems. For example, a bow that is pulled back has potential energy that can be released as kinetic energy when it is released.

Kinetic energy, on the other hand, is the energy that an object possesses due to its motion. It is the energy that an object possesses because it is in motion and is able to do work by causing a change in another object's motion or position. The amount of kinetic energy that an object has depends on its mass and its velocity. For example, a moving car has kinetic energy that can be transferred to another object if it collides with it.

When the bow is drawn, it stores potential energy. When fired, this potential energy is converted into kinetic energy for the arrow. In an ideal situation with no energy loss, the arrow's kinetic energy will be equal to the bow's potential energy. Therefore, the arrow will have a kinetic energy of 40 J.

To learn more about Potential Energy and Kinetic Energy. Please Visit:

https://brainly.com/question/30176483

#SPJ11

The law of conservation of energy states that energy is neither created nor destroyed but is transformed from one form to another.

The law of conservation of energy is the law that states that energy is neither created nor destroyed but is transformed from one form to another.

Examples of activities of everyday life that shows the conservation of energy include the following:

Learn more about energy here:

https://brainly.com/question/25959744

#SPJ1

An example of the law of conservation of energy is a roller coaster.

The law of conservation of energy states that energy cannot be created or destroyed, only transferred or transformed from one form to another. This means that the total amount of energy in a closed system remains constant over time.

A roller coaster car gains kinetic energy as it moves down the track, but it also loses potential energy. At the bottom of the track, the car has the most kinetic energy and the least potential energy, while at the top of the track, it has the most potential energy and the least kinetic energy. However, the total amount of energy in the system remains constant.

Learn about law of conservation of energy here https://brainly.com/question/166559

#SPJ1