A+tennis+ball+bounces+on+the+floor+three+times.+if+each+time+it+loses+22%+of+its+energy+due+to+heating,+how+high+does+it+rise+after+the+third+bounce,+provided+we+released+it+3.1+m+from+the+floor?

Answer:

at the vertical change

Explanation:

i believe this is right

The speed of light in a vacuum is the same for all frames of reference.

so "Light travels through space at a speed of 3.0 x 10^8 m/s."

To know more about frame of reference  visit : https://brainly.com/question/1217098

#SPJ4

The value of charge in coulombs is 0.9 × 10—⁹ coulombs.

Radius 1 of the surface = 0.5 m

Radius 2 of the sphere = 1.9 m

Area of the surface = 3

The magnitude of the electric field at the surface = 8300 N/C

The electric flux through a surface is,

[tex] Electric \: flux=Electric \: field \: \times area \: of \: the \: surface[/tex]

[tex]Φ = E \times S[/tex]

[tex]Φ = EScosθ[/tex]

[tex]Φ =E \times 4 \times \pi \times r ^{2} [/tex]

According to Gauss, the net electric flux is,

[tex]Net \: electric \: flux = \frac{1}{E _{0} } \times charge \: enclosed[/tex]

[tex]Charge \: enclosed = 4 \times \pi \times E _0 \times a \times r ^{3} [/tex]

[tex] = \frac{1}{9 \times 10 ^{9} } \times 3 \times (1.4) ^{3} [/tex]

[tex] = 0.9 \times 10 ^{ - 9} \: C[/tex]

Therefore, the value of charge in coulombs is 0.9 × 10—⁹ coulombs.

To know more about the electric field, refer to the below link:

https://brainly.in/question/7556475

#SPJ4

Answer:

1.An object at rest has zero velocity - and (in the absence of an unbalanced force) will remain with a zero velocity. Such an object will not change its state of motion (i.e., velocity) unless acted upon by an unbalanced force.

3.Let speed of balls are v

1

and v

2

.

There is no external force acting, momentum will be conserved.

m

1

u

1

+m

2

u

2

=m

1

v

1

+m

2

v

2

⇒m×6−m×6=mv

1

+mv

2

⇒v

1

=−v

2

Coefficient , e=−

u

1

−u

2

v

1

−v

2

⇒

3

1

=−

6+6

v

1

−v

2

⇒v

1

=−2m/sWhen two objects with the same mass collide, Newton's laws tell us that they will accelerate the same amount but in opposite directions.

Collision Forces - 5/5

1. A) Motion will be either created, stopped or changed.

2. D) 5,208 N

3. B) the mass and acceleration of each person

4. C) balanced forces

5. B) 13.125 N to the right

Hope this helps ya out peeps!

e = 0.57 is the moon's orbital eccentricity

You may determine the ellipse's eccentric formula by using

e = r a - r p / r a + r p

The distance r a between the moon and its planet is the greatest.

r p=0.27 The shortest distance between the moon and its planet is r a.

Then, e = r a - r p / r a + r p

e is defined as (r a - 0.27 r a) / (r a + 0.27 r a).

e = 0.73r a / 1.27 r a

e = 0.57

The eccentricity of a conic section expresses how much it resembles a circle. Every conic section has this distinctive parameter, and conic sections are only said to be identical if and only if their eccentricities are the same. A conic section's eccentricity is a non-negative real integer that specifically describes its shape. Formally speaking, two conic sections are comparable if and only if their eccentricities match. The eccentricity can be thought of as a measurement of how far a conic section strays from being round.

To know more about eccentricity refer to https://brainly.com/question/12791730

#SPJ4

To compare the magnitude of flux through the surface wherein the cylinder in 2 has twice the radius and half the length compared to the cylinder in case 1 and this comparison in magnitude is given as ϕ= 2ϕ.

The charge density can be defined as a measurement of the amount of electric charge that is present per unit of surface area, body volume, or field.

The amount of charge that is held in a specific field is determined by the charge density. It is absolutely possible to calculate charge density of an object in terms of length, area, or volume.

If q is taken as the charge and l is the distance that it travels, then q/l is the formula for the linear charge density, and the S.I. Coulombs per meter (cm1) is the unit used to measure linear charge density.

The general response is most conveniently expressed in terms of the linear charge density, which is equal to Q/L for a finite rod of length L and total charge Q.

To know more about flux, visit:

https://brainly.com/question/14527109

#SPJ4

The direction of velocity is 81.12°

Given that,

Since it is a right angled triangle,

tan θ = Opposite side / Adjacent side

tan θ = Total vertical velocity/ Total horizontal velocity

tan θ = 7714.9 / 1204.9 = 6.4

θ = [tex]tan^{-1}[/tex] ( 6.4 )

θ = 81.12 °

Therefore, the direction of its velocity is 81.12° with respect to x - axis.

To know more about magnitude of velocity

https://brainly.com/question/28185311

#SPJ1

The person that practicing yoga for one hour burns 285 kilocalories (kcal) burned: 1192440 j of energy

To solve this problem the we have to do the conversion of units with the given information.

Information about the problem:

By converting the energy units from kilocalories (kcal) to joules (j) we have:

energy =285  kcal * 4184 j/ 1 kcal

energy = 1192440 j

It is the transformation of a value expressed in one unit of measurement into an equivalent value expressed in another unit of measurement of the same nature.

Learn more about unit conversion at: brainly.com/question/141163

#SPJ4

Reactants are substances that are present at the beginning of a chemical reaction.

Products are the substance(s) to the right of the arrow. A substance that remains after a chemical reaction is complete is known as a product.

Consider the balanced chemical equation:

2H₂O → 2H₂ + O₂

Hydrogen and oxygen are the reactants, and water is the product in the balanced equation.

The reactants and product symbols and formulae are known from the aforementioned equation.

One oxygen molecule and two hydrogen atoms unite to form two water molecules.

The ratio of reactant to product is 2 : 1 : 2.

The total mass of products is equal to the total mass of the reactants according to the law of conservation of mass.

Learn more about balanced equations here:

https://brainly.com/question/15355912

#SPJ9

The differential equation for the concentration of the chemical is given by dc/dt = (3/10⁶)(1 - 100c)

Suppose that a(t) is the amount of chemical in the pond at time t.

So, a'(t) = rate of chemical inflow - the rate of chemical outflow.

So, da/dt = (0.01)300 - (a/10⁶)300

So, da/dt = 3 - 3a/10⁴

Now,

Since, c = a/v

Then, c' = a'/v

So, c' = (3 - 3a/10⁴)/10⁶

Or, c' = 3 (1 - a/10⁴)/10⁶

So, dc/dt = 3/10⁶ (1 - cv/10⁴)

So, dc/dt = (3/10⁶) (1 - 100c)

Therefore the differential equation for the concentration of the chemical is dc/dt = (3/10⁶)(1 - 100c)

To learn more about differential equations and concentration, visit: https://brainly.com/question/14583279

#SPJ4

Two rocket ships approach a space station at 80% of the speed of light. Each pilot observes the other ship approaching at 98% the speed of light.

To learn more about Speed of Light refer to

https://brainly.com/question/25922783

#SPJ4

Answer:

increase!!!

M V R        describes the angular momentum of mass M

If R is decreased for a given mass M then the velocity must increase to account for the angular momentum being a constant (conserved).

NO, It is an Right Triangle

p(2 , - 1 0)  Q ( 4,  1, 1)  R( 4, -5, 4)

PQ2  =  ( 2 -4)^2 + (-1-1)^2 +( 0-1)^2

PQ^2= (4 + 4  +1 )=9

PQ = 3  

QR^2 = ( 4 - 4)^2 + ( 1 +5)^2 + ( 1-4 )^2

=  0 + 36 + 9  =45

QR = √45 =3√5

RP^2 =  ( 4-2)^2 + ( -5 +1)^2 + (4-0)^2

 =  4 + 16 + 16 = 36

   RP = 6

 LENGTH  OF  SIDES ARE   3 ,6 ,  3√5

and  ajsoPQ^2 + RP^2  = 9 + 36 = 45 =QR^2

PQR   is a  right  angle  triangle

To know more about Right Triangle   visit : https://brainly.com/question/6322314

#SPJ4

The thing i observe if  I hold a largest plastic shopping bag square between the light source and the wall is that since the plastic is Translucent, it  allow some measures of light to pass through it.  When light hits the translucent materials, since it is big and little thicker, only some of the light went through them.

As light travels through air as well as into a clear material (such as glass), it speed is altered, and light is said to be reflected and also refracted by the said glass

Note that  Light can pass through some kind of materials, such as glass, water, plastic that is clear and transparent materials.

Therefore, The thing i observe if  I hold a largest plastic shopping bag square between the light source and the wall is that since the plastic is Translucent, it  allow some measures of light to pass through it.  When light hits the translucent materials, since it is big and little thicker, only some of the light went through them.

Learn more about light reflection from

https://brainly.com/question/18772331

#SPJ1

Answer: 1.3%

The speed of a bullet train is measured to be 312.0 mph ± 3.9 mph. What is the percent uncertainty in this measurement?(1 point) 1.3%

The width of central maximum increases if the wavelength is increased.

The width of the central maximum is simply the distance between 1st order minima from the center of the screen on both sides. Thus, the central maximum becomes twice as wide if the slit width a becomes half as wide.

For one slit experiment, the size(angular width) of the central maximum is given by a 2 λ a , where a is that the slit width. therefore the width of the central maximum is directly proportional to the wavelength of light and inversely proportional to slit width.

A central maximum is that the brightest central zone of a diffraction pattern on the screen. The central maximum has the utmost intensity and widest of all the other diffraction fringes

Learn more about wavelength of central maxima :

brainly.com/question/13104464

#SPJ4

Answer:

one in which the motion of a particle not subject to forces is in a straight line at constant speed

Explanation:

I searched this on the internet

During this inattentive period, the distance traveled is 73.33 when the speed is 120 km/h and the time taken is 2.2 s.

Every moving object travels a particular distance over time. These two factors enable us to determine the speed. The frequency of displacement is the sole determinant of speed. The complete mobility of an object, regardless of direction, will be its distance. No matter where an object originates or finishes, distance measures how much ground it has travelled. A process, an action, or a condition's duration is the amount of time that can be measured or quantified. Speed is the rate at which an object travels along a path over time, whereas velocity is the speed and direction of an item's motion. In another sense, velocity is a vector, whereas speed is a scalar value. There is a formula that connects these three things. Speed can be thought of as a gauge for a body's rate of motion. The distance covered in a single unit of time is how it is defined.

Speed = Distance/ Time

We are given Average speed, = 120 km/h=(120 * 1000)/3600=33.33 m/s

Time, t=2.2s

Now speed =  Distance/ Time

⇒ Distance = speed * time=33.33*2.2=73.33

Thus distance traveled is 73.33 m

To know more about speed, time and distance, click here:

https://brainly.com/question/14411565

#SPJ4

By unit conversion, the power is 4.023 HP.

We need to know about unit conversion to solve this problem. The unit conversion can be used to convert a unit to another unit. It can be defined as

a = xb

where a is unit a, b is unit b and x is the constant of conversion.

From the question above, we know that

P = 3000 watts

unit conversion

(1 HP = 745.7 watts)

Convert the unit conversion

1 HP = 745.7 watts

divide by 745.7

1/745.7 HP = 1 watts

Convert the aspirin power to horsepower

P = 3000 watts

P = 3000 x 1/745.7 HP

P = 3000/745.7 HP

P = 4.023 HP

Find more on unit conversion at: https://brainly.com/question/4158962

#SPJ4

The moon appears 1.1153 during perigee than at apogee.

Perigee is the point at which the moon is nearest to the Earth each month.

The points of apogee and perigee varies throughout the year.

Apogee is the point at which the moon is farthest to the Earth each month.

from the data given,

perigee= 364000km

Apogee= 407000km

diameter= 3480km

p/a = 406,000/364,000

= 1.1153.

Thus, the moon appears 1.1153 during perigee than at apogee.

In conclusion,  it has been scientifically found that in periods of four years, lunar perigees and apogees fall on the same or nearly the same calendar dates.

Learn more about perigee at: https://brainly.com/question/670576

#SPJ1

Finding the initial and final values for the quantity that the capacitor or inductor opposes changing—i.e., the quantity that the reactive component is seeking to maintain constant—is the first stage.

This amount is voltage for capacitors and current for inductors. This amount is to be used as the "beginning" value because when the switch in a circuit is closed (or opened), the reactive component will try to keep that quantity at the same level as it was before the switch transition. This quantity's ultimate value is whatever it will be after an infinitely long period of time.

Learn more about quantity here-

https://brainly.com/question/12986460

#SPJ4

The first quarter in which half the Moon appears illuminated, occurs when the Moon is at a right angle with respect to the Sun when viewed from the Earth.

The Moon is a non illuminating celestial object and doesn't have its own light but reflects the light of the sun and with change in angle between moon and Sun the different phases of the moon appear as seen from earth.

Given:

The Moon is in the first quarter of illumination.

In the first quarter of the moon the only one-fourth of the sun is illuminated and is observable from earth.

For this to happen only the visibly i.e. one-fourth of the moon should be reflecting back the light of the sun.

For this to happen the moon shouldn't be completely opposite to the sun behind the earth. But rather at right angles with respect to the sun when seen from earth.

Therefore, The first quarter in which half the Moon appears illuminated, occurs when the Moon is at a right angle with respect to the Sun when viewed from the Earth.

Learn more about the different moon phases here:

https://brainly.com/question/12676209

#SPJ9

Answer:

huhu

chuba bi miayang yo

trip rp rrip trip

Explanation:

how are things going with your family in the car with the family in because or am we supposed for a car to stay at the airport and get a taxi

Answer:

is an early warning sign of infection

Explanation:

it allows organs and bodily proccess to work effectively

Vector a b = c, and that |al |b| = |cl, vectors a and b oriented with respect to each other because they are perpendicular to each other.

A vector is an object that has both magnitude and a direction. Geometrically, we can picture vector as a directed line segment, whose length is the magnitude of the vector and with an arrow indicating the direction. The direction of vector is from its tail to its head.

Two vectors are the same if they have same magnitude and direction. This means that if we take a vector and translate it to a new position (without rotating it), then vector we obtain at the end of this process is the same vector we had in beginning.

Two examples of vectors are those that represent the force and velocity. Both the force and velocity are in a particular direction. The magnitude of vector would indicate the strength of the force or the speed associated with the velocity.

We denote vectors using the boldface as in a or b. Especially when writing by hand where one cannot easily write in boldface, people will sometimes denote vectors using the arrows , or they use the other markings. We won't need to use the arrows here. We denote magnitude of the vector a by |a|. When we want to refer to a number and stress that it is not a vector, we can call number a scalar. We will denote scalars with the italics, as in a or b.

To know more about stress visit: brainly.com/question/14582509

#SPJ4

Kw = 4.36×10^-16 is the value of kw at temperature when the ph of a neutral solution is 7.68.

The formula for Kw is:

Kw= [H]*[OH]

where [H] and [OH] are concentrations

We are given the pH so we can calculate the [H] concentration from the formula:

pH=-log[H]

[tex]P_{H} =-log_{10} [H^{+} (aq)][/tex]

[tex]-P_{H} =log_{10} [H^{+} (aq)][/tex]

[tex][H^{+} (aq)]=10^{-P_{H} }[/tex]

[tex][H^{+} (aq)]=10^{-7.68}[/tex]

[tex][H^{+}(aq) ]=[/tex]2.089×[tex]10^{-8}[/tex]mol [tex]dm^{-3}[/tex]

In neutral solution, [H] = [OH],

therefore: [OH]=2.089×10^-8M

Calculating Kw:

Kw = (2.089×10^-8M) *(2.089×10^-8M)

Kw = 4.36×10^-16

To learn more about value of kw refer to

https://brainly.com/question/25922783

#SPJ4

The correct answer is 0.00981 kJ/mol.

Every object we encounter has a binding force, and the energy that holds them together is the binding energy. The binding energy is the least amount of energy necessary to remove an electron, proton, or neutron from the nucleus. A nucleus contains electrons and protons that are strongly bound by energy.

Free energy of binding can be calculated using formula, Gbinding = dE coluombic + dEvdw + dGhyd. -TdS where Evdw+Ecoulombic is protein ligand interaction, dGhyd is change in hydration energy.

dS is entropy. dG hydration is Gpolar+Gnon polar. Inhibition constants are given for CBD and

THC = 4350nm, and 44nM. So,

dG = Ki + Ki' = 44+4350 = 4394 and

in kJ/mol = NahC/4394 = (6.022x10^23x6.626x10^-34x3x10^8)/4394 = 0.00981 kJ/mol

To learn more about binding energy refer the link:

https://brainly.com/question/13162889

#SPJ4