Answer:
To find the percent sales tax, we can use the following formula:
Percent tax = (Tax amount ÷ Base price) × 100%
Where "Base price" is the original price of the item before tax is added.
In this case, the base price of the sneakers is $22, and the total price with tax is $23.98. The tax amount is:
Tax amount = Total price - Base price
Tax amount = $23.98 - $22
Tax amount = $1.98
Now we can calculate the percent sales tax:
Percent tax = (Tax amount ÷ Base price) × 100%
Percent tax = ($1.98 ÷ $22) × 100%
Percent tax = 0.09 × 100%
Percent tax = 9%
Therefore, the percent sales tax is 9%.
i need help with a. b. and c.
Check the picture below.
so if we just find the vertex of that parabolic path, we'd get how far up it went and how long it took
[tex]\textit{vertex of a vertical parabola, using coefficients} \\\\ h(t)=\stackrel{\stackrel{a}{\downarrow }}{-16}t^2\stackrel{\stackrel{b}{\downarrow }}{+16}t\stackrel{\stackrel{c}{\downarrow }}{+0} \qquad \qquad \left(-\cfrac{ b}{2 a}~~~~ ,~~~~ c-\cfrac{ b^2}{4 a}\right)[/tex]
[tex]\left(-\cfrac{ 16}{2(-16)}~~~~ ,~~~~ 0-\cfrac{ (16)^2}{4(-16)}\right) \implies \left( - \cfrac{ 16 }{ -32 }~~,~~0 - \cfrac{ 256 }{ -64 } \right) \\\\\\ \left( \cfrac{ -1 }{ -2 } ~~~~ ,~~~~ 0 +4 \right)\implies \stackrel{seconds ~~ feet }{\left(0.5~~,~~4 \right)}[/tex]
well, as you see in the picture, the horse hits the ground again when h(t) = 0
[tex]\stackrel{h(t)}{0}=-16t^2+16t\implies 0=-16t(t-1)\implies t= \begin{cases} 0\\ 1 \end{cases}[/tex]
so at t=0 and t=1 it's touching the ground, at t=0 when it begins to jump at t=1 when it thumps back down, took that long.
Suppose that you are an elementary school teacher and you are evaluating the reading levels of your students. You find an individual that reads 50 word per minute. You do some research and determine that the reading rates for their grade level are normally distributed with a mean of 85 words per minutes and a standard deviation of 20 words per minutes
At what percentile is the child’s reading level?
The student's reading level is at the 4.01st percentile. Answer: 4.01.
Given that you are an elementary school teacher and you are evaluating the reading levels of your students. You find an individual that reads 50 word per minute. You do some research and determine that the reading rates for their grade level are normally distributed with a mean of 85 words per minutes and a standard deviation of 20 words per minutes.The percentile of a given value represents the percentage of the distribution that falls below that value.To find the percentile rank of the student's reading level, we can use the Z-score formula:$$z = \frac{X - \mu}{\sigma}$$where X is the student's reading rate, μ is the mean reading rate for the grade level, and σ is the standard deviation of the reading rates for the grade level. Substituting the given values, we get:$$z = \frac{50 - 85}{20} = -1.75$$The negative sign indicates that the student's reading rate is below the mean rate for the grade level. Now we need to find the percentile of the Z-score -1.75.Using a standard normal table or calculator, we can find that the area to the left of -1.75 under the standard normal distribution is 0.0401. Therefore, the student's reading level is at the 4.01st percentile. Answer: 4.01.
Learn more about Percentile
brainly.com/question/1561673
#SPJ4
M7 App P2of2B. Suppose that you are working for a chain restaurant and wish to design a promotion to disabuse the public of notions that the service is slow. You decide to institute a policy that any customer that waits too long will receive their meal for free. You know that the wait times for customers are normally distributed with a mean of 20 minutes and a standard deviation of 4 minutes. Use statistics to decide the maximum wait time you would advertise to customers so that you only give away free meals to at most 1% of the customers.a. Determine an estimate of an advertised maximum wait time so that 1% of the customers would receive a free meal. Round to one decimal place. __________ minutesb. Include a graph illustrating the solution. For the graph do NOT make an empirical rule graph, just include the mean and the mark off the area that corresponds to the 1% who would receive the refund. There is a Normal Distribution Graph generator linked in the resources area. Combine the above into as single file and upload using the link below. Choose Filec. Write a response to the vice president explaining your prescribed maximum wait time. Structure your essay as follows:An advanced explanation of the normal distributionWhy the normal distribution might apply to this situationDescribe the specific normal distribution for this situation (give the mean and standard deviation)Explain how the graph created in part b. represents the waiting times of the customers.Explain the answer to part a. in terms of both the customers who get a free meal and those who do not. Feel free to use the accurate answer in part a to determine a "nice" wait time to be used in the actual advertising campaign.Use the answers to parts a. and b. to explain how the proposal will not result in a loss of profit for the company.
The normal distribution is a mathematical model used to describe real-world data that occurs in many scenarios, including restaurant wait times. The normal distribution is characterized by a mean and a standard deviation; in this case, the mean wait time is 20 minutes, and the standard deviation is 4 minutes.
In order to find the maximum wait time for customers so that at most 1% of them would receive their meals for free, we can use the normal distribution graph.
The graph shows the probability of a customer waiting any given amount of time. The mean is the highest point on the graph, while the standard deviation can be seen as two "bumps" on either side of the mean. For this scenario, any customer who waits more than 25.5 minutes will be in the top 1% of wait times, and therefore, should receive their meal for free.
This provides a reasonable time limit for customers to expect their meal, while also helping to dispel any negative perceptions about the speed of service.
In terms of the company's profitability, offering free meals to the top 1% of customers does not present any significant risk. The 25.5 minute wait time is well above the average wait time of 20 minutes, so it's unlikely that the company will incur a significant loss due to this promotion.
To sum up, the maximum wait time to be advertised to customers so that 1% of them will receive their meals for free is 25.5 minutes. The normal distribution graph shows how this wait time is chosen, as it corresponds to the top 1% of wait times.
As the average wait time is much lower than this maximum wait time, this promotion is unlikely to cause the company any significant loss in profit.
For further information on normal distribution, refer below:
https://brainly.com/question/29509087
#SPJ11
HELP FAST
A stem and leaf plot showing the movie length in minutes shown. The stems from top to bottom are 8, 9, 10, 11, 12, 13. The first column of leaves is 1, 0, 4, 1, 5, 2. The second column of leaves is 3, 3, 4, 3, 9, 6. The third column of leaves is blank, 7, 7, 5, 9, blank. The fourth column of leaves is blank, blank, 9, blank, blank, blank.Type in the five-number summary for the data shown on the right.
The minimum of the data is
.
The first quartile is
.
The median of the data is
.
The third quartile is
.
The maximum of the data is
.
The minimum οf the data is 81, the first quartile is 94, the median οf the data is 105, the third quartile is 129, and the maximum οf the data is 133.
What is stem and leaf plοt?A stem and leaf plοt is a graphical representatiοn οf a dataset that is used tο display and οrganize individual values. The plοt is made up οf twο parts: the "stem" and the "leaf." The stem is the left-hand side οf the plοt and represents the first οne οr twο digits οf the values, while the leaf is the right-hand side οf the plοt and represents the remaining digits.
This plοt shοws the distributiοn οf the data and allοws yοu tο quickly see the range οf values, the shape οf the distributiοn, and any οutliers οr gaps in the data.
The stem and leaf plot represents the following data:
Stem/Leaf Value
8 1 3 813
9 0 3 4 7 903, 934, 974
10 4 7 104, 107
11 5 15
12 9 129
13 13
The five-number summary for the data is as follows:
The minimum of the data is 81.
The first quartile is 94.
The median of the data is 105.
The third quartile is 129.
The maximum of the data is 133.
To know more about stem and leaf plot visit:
brainly.com/question/12857419
#SPJ1
Answer:
minimum-81
first Q-95
median-109
third Q-127
maximum-136
Step-by-step explanation:
yurrrrr
There are 8 circles and 4 squares. What is the simplest ratio of squares to total
shapes?
Answer: 4:12
Step-by-step explanation: Since it is squares to total you have to put the amount of squares first. That would be 4. Then, you have to figure out the total which is just adding 4+8=12. That would be the total. Therefore, the answer would be 4 to 12.
Solve the formula for r.
The solution for the formula V = πr² is A. r = √(V/(π)).
What is the equivalent expression?
Equivalent expressions are expressions that work the same even though they look different. If two algebraic expressions are equivalent, then the two expressions have the same value when we plug in the same value for the variable.
To solve for r in the formula V = πr², we need to isolate r on one side of the equation.
We can do this by dividing both sides of the equation by π and then taking the square root of both sides:
V/π = r²
√(V/π) = r
Therefore, the solution is A. r = √(V/(π)).
To learn more about the equivalent expression visit:
https://brainly.com/question/2972832
#SPJ1
What point on the coordinate plane is halfway between (–0. 75, –1. 25) and (–0. 75, –0. 25)?
The point halfway between (–0.75, –1.25) and (–0.75, –0.25) is (–0.75, –0.75).To find the point halfway between (–0.75, –1.25) and (–0.75, –0.25), we will use the midpoint formula.
To find the point halfway between (–0.75, –1.25) and (–0.75, –0.25), we will use the midpoint formula. The midpoint formula is (x1 + x2) / 2, (y1 + y2) / 2. In this case, x1 and x2 are both –0.75, and y1 is –1.25 and y2 is –0.25. Plugging in the values and doing the math, we get (–0.75 + –0.75) / 2 = –0.75, and (–1.25 + –0.25) / 2 = –0.75. Therefore, the point halfway between (–0.75, –1.25) and (–0.75, –0.25) is (–0.75, –0.75).
Learn more about midpoint here
https://brainly.com/question/28224145
#SPJ4
Use the Remainder Theorem to determine whether x = 2 is a root
of ????(x) =3x^3−4x^2−8.
x = 2 is not a root of the given function.
We are required to use the Remainder Theorem to determine whether x = 2 is a root of the given function:????(x) = 3x³ − 4x² − 8.Remainder Theorem The Remainder Theorem states that when a polynomial function f(x) is divided by (x - a), the remainder equals f(a).In order to find whether x = 2 is a root of the function or not, we have to apply the Remainder Theorem. We can perform the division in the following manner: Solution The given polynomial function is: ????(x) = 3x³ − 4x² − 8.So, we can perform the division as shown below: On dividing f(x) by (x - a), the remainder is f(a). Hence, the remainder when the given function is divided by (x - 2) is -14.Therefore, x = 2 is not a root of the given function.
Learn more about Remainder Theorem
brainly.com/question/13264870
#SPJ11
What share of the 2 leftover flats of plants should I plant in each garden?
Write the remainder as a fraction.
22 + 5 = 4 R2
The answer, however, will be less than one because the numerator is less than the denominator. Thus, 1 divided by 2 is equal to 0.5. The right response is hence "0.5."
What is unitary method?
"A method to find a single unit value from a multiple unit value and to find a multiple unit value from a single unit value."
We always count the unit or amount value first and then calculate the more or less amount value.
For this reason, this procedure is called a unified procedure.
Many set values are found by multiplying the set value by the number of sets.
A set value is obtained by dividing many set values by the number of sets.
Hence, The answer, however, will be less than one because the numerator is less than the denominator. Thus, 1 divided by 2 is equal to 0.5. The right response is hence "0.5."
learn more about unitary method click here:
brainly.com/question/24587372
#SPJ1
Select all expressions that are equivalent to 81x^2 +180x -200 =100
The expressions that are equivalent to 81x² + 180x - 200 = 100 are: 27x² - 60x + 100 = 0, x² + (20/9)x - (100/27) = 0, (x + 1/3)(x + 10/3) = 0, (3x + 1)(3x + 10) = 0.
To find the expressions that are equivalent to 81x² + 180x - 200 = 100, we can simplify and manipulate the equation using basic algebraic operations.
Starting with the given equation:
81x² + 180x - 200 = 100
We can subtract 100 from both sides to get:
81x² + 180x - 300 = 0
Now, we can simplify the left side by dividing each term by their greatest common factor, which is 3:
27x² + 60x - 100 = 0
Next, we can divide each term by 27 to make the coefficient of x² equal to 1:
x² + (60/27)x - (100/27) = 0
Simplifying the fractions, we get:
x² + (20/9)x - (100/27) = 0
Now, we can use the quadratic formula to find the solutions of this equation:
x = (-b ± √(b² - 4ac))/2a
where a = 1, b = 20/9, and c = -100/27.
Plugging in these values, we get:
x = (-20/9 ± √((20/9)² + 4(1)(100/27)))/2(1)
x = (-20/9 ± √(400/81 + 400/27))/2
x = (-20/9 ± √(1600/81))/2
x = (-20/9 ± 40/9)/2
x = (-20 ± 40)/18
x = -1/3, -10/3
Learn more about factor here: brainly.com/question/219464
#SPJ4
The weights of certain machine components are normally distributed with a mean of 6. 3 ounces and a standard deviation of 0. 03 ounces. Find the two weights that separate the top 9% and the bottom 9%. These weights could serve as limits used to identify which components should be rejected. Round your answer to the nearest hundredth, if necessary
the weights that separate the top 9%of the machine components is 6.33 ounces and the bottom 9% of the machine components is 6.27 ounces.
We know that the weights of the machine components are normally distributed with a mean of 6.3 ounces and a standard deviation of 0.03 ounces.
Let X be the weight of a machine component.
To find the weights that separate the top 9% and the bottom 9%, we need to find the z-scores corresponding to these percentiles and then use them to find the corresponding weights.
Using a standard normal distribution table, we can find that the z-score corresponding to the top 9% is approximately 1.34, and the z-score corresponding to the bottom 9% is approximately -1.34.
Using the formula for converting a value to a z-score:
z = (X - μ) / σ
For the top 9% weight, we have:
1.34 = (X - 6.3) / 0.03
Solving for X, we get:
X = 6.33 ounces
For the bottom 9% weight, we have:
-1.34 = (X - 6.3) / 0.03
Solving for X, we get:
X = 6.27 ounces
Therefore, the weights that separate the top 9% and the bottom 9% of the machine components are 6.33 ounces and 6.27 ounces, respectively. Any components with weights outside of this range may be considered for rejection.
To learn more about standard deviation click here
brainly.com/question/23907081
#SPJ4
What is the answer for this questions?
Answer:
A. Corresponding angles
B. Vertically opposite angles
C. Alternate angles
Step-by-step explanation:
Alternate angles are two angles, not adjoining one another, that are formed on opposite sides of a line that intersects two other lines. If the original two lines are parallel, the alternate angles are equal.
Vertically Opposite Angles are the angles opposite each other when two lines cross "Vertical" in this case means they share the same Vertex (corner point), not the usual meaning of up-down. Example: a° and b° are vertically opposite angles.
Corresponding angles are the angles which occupy the same relative position at each intersection where a straight-line crosses two others. If the two lines are parallel, the corresponding angles are equal.
Put these locations in order from most minutes of sunlight during summer months to least minutes of sunlight during summer months
From most minutes of sunlight to least minutes of sunlight during summer, the order would be Winnepeg, Philadelphia, Houston and Porto Alegre.
How does the number of sunlight hours change depending on your location?The number of sunlight hours increases as you move to the north, indeed in places like Alaska there can be 24 hours of sunlight near the summer solstice. Based on this principle, the correct order for the places given would be:
Winnepeg in CanadaPhiladelphia, Pennsylvania, United StatesHouston, Texas, United StatesPorot Alegre, BrazilLearn more about summer in https://brainly.com/question/2751386
#SPJ1
work out the value of
7 squared + \sqrt{25 }
Answer:54
Step-by-step explanation:
7 squared + \sqrt{25 }
[tex]7^{2}=49\\and \ \\\sqrt{25}=5[/tex]
49+5=54
Answer:
54
Step-by-step explanation:
[tex]7 ^2 + \sqrt{25} \\= 49 + 5\\= 54[/tex]
Hope this helps!
Brainliest and a like is much appreciated!
1. In each case, find the standard Cartesian, parametric, and the normal forms for each line in R 2
. One form might be easier to compute directly from the data than the other forms. (a) Slope m= 5
2
passing through the point (3,1). L(x 0
,v)= H 2
(x 0
,n)= (b) x and y intercepts are (2,0) and (0,3).
The Cartesian, parametric, and normal forms for the given line in R2 are y = 5x - 15, x = 2 + t and y = 3 + 5t, and 4x – 5y + 15 = 0, respectively.
Cartesian form: The Cartesian form for this line is y = 5x - 15. This can be calculated by taking the given slope (m = 5) and the given point (3,1), and using the equation y-y1 = m(x-x1) to solve for the y-intercept.
Parametric form: The parametric form for this line is x = 2 + t and y = 3 + 5t. This can be calculated by taking the given x and y intercepts (2,0) and (0,3), and using the equations x = x1 + t and y = y1 + m*t to solve for t.
Normal form: The normal form for this line is 4x – 5y + 15 = 0. This can be calculated by taking the given slope (m = 5) and the given point (3,1), and using the equation Ax + By + C = 0 to solve for A, B, and C.
Learn more about line here:
https://brainly.com/question/17731558
#SPJ1
the function f(x)=6x^2-180x=1000 represents the profit f(x) in thousands of dollars of selling x items. what is the meaning of the extreme value?
The extreme value of the function f(x) is the minimum value of the profit, which occurs when x = 15.
How to Determine the Extreme Value?The given function f(x) represents the profit in thousands of dollars of selling x items. To find the meaning of the extreme value, we need to find the critical points of the function, which are the values of x where the derivative of the function is equal to zero or undefined.
The derivative of the given function is:
f'(x) = 12x - 180
Setting f'(x) = 0 to find critical points:
12x - 180 = 0
Solving for x, we get:
x = 15
So, x = 15 is the critical point of the function.
Now, we need to determine whether this critical point is a maximum or a minimum.
To do so, we can use the second derivative test. The second derivative of the given function is:
f''(x) = 12
Since f''(15) = 12 > 0, the critical point x = 15 is a minimum.
Therefore, the extreme value of the function f(x) is the minimum value of the profit, which occurs when x = 15. This minimum value represents the least amount of profit that can be earned by selling the items.
Learn more about the extreme value of a function on:
https://brainly.com/question/12499771
#SPJ1
What is true about the three legs of an equilateral triangle?
Answer:
congruent, same length
Step-by-step explanation:
The three sides of an equilateral triangle are congruent.
They have the same length.
x + 4y = 1 3x + 5y = 10
Step-by-step explanation:
x + 4y = 10 ---(1)
13x + 5y = 10 ---(2)
(1) x 13 : 13x + 52y = 130 ---(3)
(3)-(2) : 47y = 120
y = 120/47 ---(4)
sub (4) into (1)
x + 4y = 10
x + 4(120/47) = 10
x = -10/47
The line I passes through the points (1, 4) and (-1,-5).
Find the gradient of line L.
Submit Answer
Answer:
9/2
Step-by-step explanation:
To find the gradient of a line passing through two points, we can use the formula:
m = (y2 - y1)/(x2 - x1)
where (x1, y1) and (x2, y2) are the coordinates of the two points on the line.
Using the points (1, 4) and (-1, -5), we have:
m = (-5 - 4)/(-1 - 1)
= (-9)/(-2)
= 9/2
Therefore, the gradient of line L is 9/2.
Given matrix A, find -2A.
To find -2A, we simply multiply every element of A by -2. Therefore,
6 -10 0
-2A = -6 4 -2
2 -8 -14
What is matrix?A matrix is a rectangular array of numbers, arranged in rows and columns. Matrices are used in many areas of mathematics, science, and engineering to represent and manipulate data.
Matrices can have any number of rows and columns, but are typically denoted by the letter A with a subscript indicating the number of rows and columns. For example, a matrix with 2 rows and 3 columns might be denoted as [tex]A_{2x3}[/tex].
To find -2A, we need to multiply every element of matrix A by -2. In other words, we need to apply the scalar multiplication operation to every element in the matrix.
Scalar multiplication is a simple operation where we multiply each element in a matrix by a scalar, which is just a regular number. In this case, our scalar is -2.
To perform scalar multiplication on a matrix, we simply multiply each element of the matrix by the scalar. So, for each element in matrix A, we can write:
(-2) * aij
where i is the row number and j is the column number of the element.
We can use this formula to find each element of -2A. Let's look at the first element, a11:
(-2) * a11 = (-2) * 5 = -10
So the first element of -2A is -10. We can repeat this process for each element in the matrix to get the following result:
6 -10 0
-2A = -6 4 -2
2 -8 -14
And that's it! We have successfully found -2A by applying scalar multiplication to every element of matrix A.
To know more about matrix visit:
https://brainly.com/question/29132693
#SPJ1
Angles Q and R form a right angle. Angle Q is twice as large as angle R. What is the measure of angle Q?
Answer:
60°
Step-by-step explanation:
Let m<R = x.
Let m<Q = 2x.
m<Q + m<R = 90
2x + x = 90
3x = 90
x = 30
m<Q = 2x = 2(30) = 60
Answer: 60°
In 2009, a fire destroyed 17/20 of the farmer's crops. Rewrite the fraction in the sentence below as a percentage.
Answer:
In 2009, a fire destroyed 85% of the
farmer's crops.
To convert a fraction to a
percentage, you can multiply the
fraction by 100.
17/20 0.85
So, 17/20 is equivalent to 0.85 or
85%.
Answer:
In 2009 a fire destroyed 85% of the farmers crops
Step-by-step explanation:
NEED HELP PLEASE HELP
Answer: b
Step-by-step explanation: b is right
On the cartesian plane to the right, a) Sketch the restricted sine function on the interval from [−2π,2π] and label at least 3 points b) Sketch the inverse sine function and label at least 3 points c) Sketch the line y=x to demonstrate the inverse functions are reflections of each other across this line
a) For sin Functions :points (−2π, 0), (0, 0), and (2π, 0). Graph look in wave form
b) For inverse sine function:points (−2π, 0), (0, 0), and (2π, 0). Graph look in wave form
c) sine function and the inverse sine function are reflections of each other across the line y=x
a) To sketch the restricted sine function on the interval from [−2π,2π], we need to plot a few points from the sine function. Using the point (−2π, 0), (0, 0), and (2π, 0), we can then connect the dots to form the graph of the sine function. The graph should look like a wave with a period of 2π, and the points we used should be marked along the graph.
b) To sketch the inverse sine function, we need to plot points from the inverse sine function. Using the point (−2π, 0), (0, 0), and (2π, 0) as we did before, we can connect the dots to form the graph of the inverse sine function. This graph should look like a wave with a period of 2π, and the points we used should be marked along the graph.
c) To demonstrate the inverse functions are reflections of each other across the line y=x, draw a line y=x on the same graph. We can then observe that the sine function and the inverse sine function are reflections of each other across the line y=x.
Learn more about Functions
brainly.com/question/12431044
#SPJ4
The slopes of JK and HN both equal 0. What can you conclude about the segments?The segments are congruent.
The segments are rays.
The segments are vertical.
The segments are parallel.
The correct option is (c) i.e. The segments are parallel.
What are parallel lines?
Parallel lines are two lines in a two-dimensional space that never intersect, no matter how far they are extended in either direction. They always maintain the same distance between them and have the same slope. The symbol for parallel lines is "||".
In geometry, parallel lines are important because they create angles that are congruent or equal to each other when intersected by a third line, known as a transversal. This concept is used in many practical applications, such as in construction, engineering, and navigation.
The segments are parallel.
If the slopes of two lines are equal, it means that the lines are either parallel or they are the same line. In this case, since the two segments have zero slope, it means that they are horizontal lines. Horizontal lines are always parallel to each other, so we can conclude that the two segments are parallel.
To learn more about parallel lines, visit the link:
https://brainly.com/question/26961508
#SPJ1
A parabola has focus (5, 7) and directrix y=0 (the x-axis). Write an equation that says point (x, y) is
on the parabola. You do not need to put it into vertex form. If it's helpful, draw a sketch of the
parabola.
Answer:
14(y -7/2) = (x -5)²
Step-by-step explanation:
You want an equation for the parabola with focus (5, 7) and directrix y=0.
EquationThe vertex of a parabola is halfway between the focus and the directrix. When the directrix is a horizontal line, the y-coordinate of the vertex is the average of the y-coordinates of the focus and directrix. The x-coordinate of the vertex is the same as that of the focus.
The scale factor in the vertex form equation is 1/(4p), where p is the distance from the vertex to the directrix.
ApplicationHere, the vertex y-coordinate is (7+0)/2 = 3.5. The vertex x-coordinate is 5. The distance from the vertex to the directrix is 3.5 -0 = 3.5.
Then the vertex form equation for the parabola can be written as ...
y = a(x -h)² +k . . . . . . . . parabola with scale factor 'a' and vertex (h, k)
y = 1/(4·3.5)·(x -5)² +3.5 . . . . . parabola with scale factor 1/(4·3.5) and vertex (5, 3.5)
The fraction can be eliminated to give the form ...
14(y -3.5) = (x -5)²
Use Tools Find an object that you think has a mass greater
than 1 kilogram. Use a pan balance with kilogram and gram
weights to measure the mass of the object. Explain how you
measured the mass.
If the combined weight is 1.5 kilograms and the weight of the gram weights is 0.5 kilograms, then the mass of the object is 1 kilogram.
What is mass?Mass is describes the amount of matter it contains. It is usually measured in kilograms or pounds. Mass is distinct from weight, which measures the force of gravity on an object.
To measure the mass of an object that I think has a mass greater than 1 kilogram, I will use a pan balance and kilogram and gram weights.
First, I will set the pan balance to 0 by adjusting the counterweight.
Then, I will place the object on one of the pans and add weights to the other pan until the balance is equal.
I will first use 1 kilogram weights and then add smaller gram weights until the pan balance is equal.
Once the pan balance is equal, the combined weight of the object and the weights will be the mass of the object.
I can then calculate the mass in kilograms by subtracting the weight of the gram weights from the total mass.
For more questions related to weight
https://brainly.com/question/29892643
#SPJ1
Hi, please help! I have attached the measurements! This us the question!
The cuboid-shaped container below is partly filled with water. What percentage of the container is filled with water? Give your answer to 1 d.p.
The percentage of the cuboid filled with water is given as follows:
53.85%.
How to obtain the volume of the rectangular prism?The volume of a rectangular prism, with dimensions length, width and height, is given by the multiplication of these dimensions, according to the equation presented as follows:
Volume = length x width x height.
The dimensions of the cuboid are given as follows:
Length of 19 cm.Width of 6 cm.Height of 13 cm.The filled dimensions of the cuboid are given as follows:
Length of 19 cm.Width of 6 cm.Height of 7 cm.As only the height is different, the percentage filled is obtained as follows:
7/13 = 53.85%.
More can be learned about the volume of a rectangular prism at brainly.com/question/22070273
#SPJ1
y=x^2+7x+4 quadratic function in vertex form
The given quadratic function, y=x^2+7x+4, in vertex form is y = (x + 7/2)^2 - 33/4
Writing Quadratic functions in Vertex formFrom the question, we are to write the given quadratic function in vertex form
To write the quadratic function y = x^2 + 7x + 4 in vertex form, we can complete the square. The vertex form of a quadratic function is y = a(x - h)^2 + k, where (h, k) is the vertex.
To complete the square, we need to add and subtract a constant inside the parentheses so that the expression inside the parentheses becomes a perfect square trinomial. We can do this by adding and subtracting (7/2)^2 = 49/4 inside the parentheses:
y = x^2 + 7x + 4
= (x^2 + 7x + 49/4) - 49/4 + 4 (adding and subtracting 49/4)
= (x + 7/2)^2 - 33/4
Hence, the vertex form is y = (x + 7/2)^2 - 33/4
NOTE: The vertex is (-7/2, -33/4).
Here is the correct question:
Write the quadrat function Y=x^2+7x+4 in vertex form
Learn more on Vertex form here: https://brainly.com/question/24850937
#SPJ1
What is the probability of someone pulling 1-10 in consecutive order from a bad that contains 10 balls labeled 1-10? Explain your reasoning.
The correct answer is [tex](\frac{1}{10!} )[/tex] i.e. 0.00002756% , for this we have to learn probability.
What is Probability?Probability of an event which define as the possibility of any event to occur when we perform any event.
Probability is a method to determine how likely something is to happen. Many things are difficult to forecast with absolute confidence. Using it, we can only make assumption about the likelihood or chance of an event happening, or how likely it is.
An event in probability theory is the result of a random experiment or a specified group of its results.
To achieve 10 balls in order we first choose a random ball, then the probability of that ball is i.e. P(1) = [tex]\frac{1}{10}[/tex] .
Then choose Second ball whose probability is i.e. P(2) = [tex]\frac{1}{9}[/tex] .
And then [tex]\frac{1}{8}, \frac{1}{7} ,\frac{1}{6} ,\frac{1}{5} .......... finally,\ \frac{1}{1}.[/tex]
[tex]P(1.......10\ in\ order)=\frac{1}{10!}[/tex]
To learn more about Probability, visit :
https://brainly.com/question/13604758
#SPJ1