Balance the following equation in basic solution using the lowest possible integers and give the coefficient of hydroxide ion.

AlH4-(aq) + H2CO(s) → Al3+ (aq) + CH3OH(aq)

Answer:

1. The balanced equation for the thermal decomposition of potassium chlorate is:

2KClO3(s) → 2KCl(s) + 3O2(g)

2. Using the stoichiometry of the balanced equation, we can see that 2 moles of KClO3 produce 3 moles of O2. Therefore, 9.50 moles of O2 are produced by (9.50 moles O2 / 3 moles O2 per 2 moles KClO3) = 6.33 moles KClO3. The heat produced by the decomposition of 6.33 moles of KClO3 is:

q = nΔHrxn = (6.33 mol)(-89.4 kJ/mol) = -566 kJ

3. To solve this problem, we need to use the ideal gas law to calculate the volume of O2 produced. First, we convert 307 g of KClO3 to moles:

n = m/M = 307 g / 122.55 g/mol = 2.50 mol KClO3

Using the stoichiometry of the balanced equation, we can see that 2 moles of KClO3 produce 3 moles of O2. Therefore, 2.50 moles of KClO3 produce (3/2 x 2.50) = 3.75 moles of O2. Now we can use the ideal gas law to calculate the volume of O2 produced:

PV = nRT

V = nRT/P = (3.75 mol)(0.08206 L·atm/mol·K)(305.15 K)/(723 torr/760 torr/atm) = 8.59 L

4. The heat produced by the decomposition of 307 g of KClO3 is:

n = m/M = 307 g / 122.55 g/mol = 2.50 mol KClO3

q = nΔHrxn = (2.50 mol)(-89.4 kJ/mol) = -223 kJ

5. We can use the equation q = mcΔT to calculate the final temperature of the water. First, we need to calculate the heat capacity of the water:

C = mc = (74.2 L)(1.00 kg/L)(4.18 J/g·K) = 310 kJ/K

Now

Explanation:

The compound that is a tertiary halogenoalkane is D. CH3CH2C(CH3)2Br, since it has a tertiary carbon (bonded to three other carbon atoms).

A halogen atom (Br, Cl, I, or F) is joined to a carbon atom that is connected to three more carbon atoms to form a tertiary halogenoalkane. Option D creates a tertiary halogenoalkane by bonding the Br-attached carbon atom to three additional carbon atoms. The Br-attached carbon is connected to two other carbon atoms, making Option A a secondary halogenoalkane. Because the carbon atom with the Br attached is only connected to one other carbon atom, option B is a primary halogenoalkane. Because the Br-attached carbon is connected to two additional carbon atoms, option C also qualifies as a secondary halogenoalkane.

learn more about halogenoalkane here:

https://brainly.com/question/30477930

#SPJ11

The least polar bond among the given options is C-H.

When the atoms in a covalent connection have various electronegativities—the capacity of an atom to draw electrons toward it—the result is polarity. The bond becomes more polar as the difference in electronegativity between the two atoms increases.

Carbon (C) and hydrogen (H) are the two alternatives that have the smallest electronegativity differences, with C having an electronegativity of 2.55 and H having an electronegativity of 2.20 on the Pauling scale. The C-H bond is therefore the least polar bond available among the choices.

The remaining bonds on the list, in comparison, have bigger disparities in electronegativity, which increases bond polarity. For instance, the C-O bond is a polar bond because of the higher electronegativity gap between C and O. The P-F and C-F bonds, which are the most polar of the available possibilities, also have the highest electronegativity discrepancies.

In conclusion, the C-H bond is the least polar bond among the available possibilities because of the minimal difference in electronegativity between the two atoms.

To know more about the polar bond refer here :

https://brainly.com/question/24775418#

#SPJ11

[tex]LiNO_{3}[/tex]There are 0.075 moles of [tex]LiNO_{3}[/tex] in 250 mL of a 0.30 M solution.

To determine the number of moles of [tex]LiNO_{3}[/tex] in 250 mL of a 0.30 M solution, we can use the formula:

moles of solute = concentration (M) x volume (L)

First, we need to convert the volume from milliliters (mL) to liters (L):

250 mL = 0.25 L

Next, we can substitute the given values into the formula:

moles of [tex]LiNO_{3}[/tex] = 0.30 M x 0.25 L

moles of [tex]LiNO_{3}[/tex] = 0.075 mol

Therefore, there are 0.075 moles of [tex]LiNO_{3}[/tex] in 250 mL of a 0.30 M solution.

Learn more about moles, here:

https://brainly.com/question/15209553

#SPJ1

The pH at the endpoint recorded in the datasheet should be compared to this calculated pH value. If they are similar, it indicates that the endpoint of the titration was reached accurately and precisely.

OH- (aq) + HT (aq) ⇌ T2- (aq) + H2O (l)

I 0.1 M 0 0

C -x -x +x

E 0.1-x -x +x

Ks = [T2-][H+]/[HT][OH-] = 2.2 x 10^-10

Substituting the concentrations into the expression:

2.2 x [tex]10^{-10}[/tex] = x²/(0.1-x)²

x = 1.48 x [tex]10^{-6}[/tex]

Since [OH-] = 1.48 x [tex]10^{-6}[/tex]M and [H+] = [OH-], the pH of the solution at the endpoint is:

pH = -log[H+] = -log[OH-] = -log(1.48 x [tex]10^{-6}[/tex]) = 5.83

pH is a measure of the acidity or basicity of a solution, with pH values ranging from 0 to 14. It is defined as the negative logarithm of the concentration of hydrogen ions in the solution. A solution with a pH of 7 is considered neutral, indicating an equal concentration of hydrogen ions and hydroxide ions.

Solutions with a pH less than 7 are considered acidic, indicating a higher concentration of hydrogen ions, while solutions with a pH greater than 7 are considered basic or alkaline, indicating a higher concentration of hydroxide ions. The pH scale is logarithmic, meaning that a change in one pH unit represents a tenfold change in the concentration of hydrogen ions. For example, a solution with a pH of 4 is ten times more acidic than a solution with a pH of 5.

To learn more about pH visit here:

brainly.com/question/2288405

#SPJ4

The molecules/ions that are likely to be planar are those that have a central atom with either three or four bonded atoms and no lone pairs. Based on this criteria,the likely planar molecules/ions are I and IV, so the answer is A) I and IV.

I. PCl3 - This molecule has a central phosphorus atom bonded to three chlorine atoms. It is likely to be planar.

II. BF4- - This ion has a central boron atom bonded to four fluorine atoms. It is likely to be planar.

III. XeF4 - This molecule has a central xenon atom bonded to four fluorine atoms. It has two lone pairs of electrons, which will cause it to adopt a square planar geometry rather than a flat plane.

IV. BrF3 - This molecule has a central bromine atom bonded to three fluorine atoms. It has two lone pairs of electrons, which will cause it to adopt a T-shaped geometry rather than a flat plane.

V. BrF5 - This molecule has a central bromine atom bonded to five fluorine atoms. It has one lone pair of electrons, which will cause it to adopt a square pyramidal geometry rather than a flat plane.

VI. H3O+ - This ion has a central oxygen atom bonded to three hydrogen atoms. It has one lone pair of electrons, which will cause it to adopt a trigonal pyramidal geometry rather than a flat plane.

Based on this analysis, the likely planar molecules/ions are I and IV, so the answer is A) I and IV.

For more questions on planar structure : https://brainly.com/question/15346125

#SPJ11

The H7- ion has one more electron than a neutral hydrogen atom (H), which has an electron configuration of 1s1.

Adding one electron to this configuration results in 1s2, which is the electron configuration of the H- ion. However, the H7- ion has seven extra electrons compared to a neutral hydrogen atom. We can fill these electrons in the following order:

1s2 2s2 2p3

The three electrons in the 2p subshell are in p orbitals. Therefore, the number of electrons in p orbitals in the H7- ion is 3.

To calculate the number of moles of H7- in 10.0 g, we first need to convert the mass to moles using the molar mass of H7-. The molar mass of H7- is: (7 x 1.00794 g/mol) + 1.00794 g/mol = 8.05558 g/mol

Therefore, the number of moles of H7- in 10.0 g is:

10.0 g / 8.05558 g/mol = 1.2412 mol

Finally, we can calculate the total number of electrons in p orbitals in 10.0 g of H7- ion in the ground state:

3 electrons/pair x 1 pair/ion x Avogadro's number x 1.2412 mol = 2.117 x 10^24 electrons

Therefore, there are approximately 2.117 x 10^24 electrons in p orbitals in 10.0 g of H7- ion in the ground state.

Learn more about hydrogen atom here:

https://brainly.com/question/29913273

#SPJ11

In the reaction: HOCl(aq) + H₂O(l), the acid, base, conjugate acid, and conjugate base are as follows:

1. Acid: HOCl(aq) - This is the acid because it donates a proton (H⁺) in the reaction.
2. Base: H₂O(l) - This is the base because it accepts a proton (H⁺) from the acid.
3. Conjugate Acid: H₃O⁺(aq) - After H₂O accepts a proton from HOCl, it forms the conjugate acid H₃O⁺.
4. Conjugate Base: OCl⁻(aq) - After HOCl donates a proton, it forms the conjugate base OCl⁻.

So, in the end the reaction can be written as: HOCl(aq) + H₂O(l) ⇌ H₃O⁺(aq) + OCl⁻(aq).

To know more about the acid & base refer here :

https://brainly.com/question/3941445#

#SPJ11

Answer:

true

Explanation:

The loss of one electron and ionic bond gives the ammonium ion ([tex]NH_4^{+}[/tex]) a positive charge, whereas the gain of one electron gives the chloride ion [tex](cl^{-} )[/tex] a negative charge. The two ions can form an ionic connection because their opposing charges are attracted to one another.

Positively charged cations and negatively charged anions are created when one or more electrons are transferred from one atom to another to form an ionic connection. A crystal lattice structure is subsequently created as a result of the cations and anions' mutual attraction.

The nitrogen atom in  ([tex]NH_4^{+}[/tex]) contributes a lone pair of electrons to a hydrogen atom in the case of  ([tex]NH_4^{+}[/tex]) and  [tex](cl^{-} )[/tex], resulting in the production of a positively charged ammonium ion. In contrast, the chloride ion advances.

Learn more about ionic bond visit: brainly.com/question/13526463

#SPJ4

By adding sodium sulphite to the conical flask, you can ensure the stability and preservation of the formed crystals.

Sodium sulphite is added to the conical flask once crystals are formed to stabilize and preserve the newly formed crystals. Here's a step-by-step explanation:
1. Crystals are formed in a conical flask through a chemical reaction or by evaporating a solution.
2. After the crystals have formed, sodium sulphite is added to the conical flask.
3. Sodium sulphite acts as a stabilizer and preservative, preventing the crystals from reacting with other substances in the solution or with atmospheric oxygen.
4. This stabilization helps maintain the quality and integrity of the crystals, ensuring they remain in their desired state for further analysis or use.

To learn more about  sodium sulphite click here https://brainly.com/question/11855511

#SPJ11

Propanedioic acid ((CH₃)₂C(O)COOH), oxalic acid (HO₂C-C(O)OH), and formic acid (HCOOH) are among the carboxylic acids created after the ozonolysis of ccccCH₃CH₂COOH.

In an organic redox reaction known as ozonolysis, ozone is used to break unsaturated carbon-carbon bonds (double or triple bonds) in alkenes, alkynes, or azo compounds.

The molecule with the SMILES string ccccCH₃CH₂COOH can undergo ozonolysis to form a mixture of products. The ozonolysis reaction involves the cleavage of the carbon-carbon double bond by ozone (O₃) to form ozonide intermediates, which can then react further to form various products.

The ozonolysis of ccccCH₃CH₂COOH would result in the formation of several carboxylic acid products, including propanedioic acid ((CH₃)₂C(O)COOH), oxalic acid (HO₂C-C(O)OH), and formic acid (HCOOH). The exact ratio and amounts of these products depend on the specific conditions of the reaction, such as the concentration of ozone, temperature, and presence of any catalysts.

Therefore, the carboxylic acids produced in the ozonolysis of ccccCH₃CH₂COOH include propanedioic acid ((CH₃)₂C(O)COOH), oxalic acid (HO₂C-C(O)OH), and formic acid (HCOOH).

Learn more about ozonolysis on:

https://brainly.com/question/24113517

#SPJ11

A)The order of increasing electronegativity is: N < P < As < Sb < H.  the order of increasing electronegativity is: H < Si < P < S < Cl , B) the order of increasing electronegativity is: H < Ge < Sr < Cl < Br , C) the order of increasing electronegativity is: H < Si < N < K < Ca. D)the order of increasing electronegativity is: H < Ge < Sr < Cl < Cs.

(a) From left to right across the periodic table, electronegativity generally increases. Among the given elements, nitrogen (N) has the lowest electronegativity, followed by phosphorus (P), arsenic (As), antimony (Sb), and hydrogen (H), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: N < P < As < Sb < H.

(b) Similarly, among the given elements, hydrogen (H) has the lowest electronegativity, followed by silicon (Si), phosphorus (P), sulfur (S), and chlorine (Cl), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Si < P < S < Cl.

(c) In this series, hydrogen (H) has the lowest electronegativity, followed by germanium (Ge), strontium (Sr), chlorine (Cl), and bromine (Br), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Ge < Sr < Cl < Br.

(d) Among the given elements, hydrogen (H) has the lowest electronegativity, followed by silicon (Si), nitrogen (N), potassium (K), and calcium (Ca), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Si < N < K < Ca.

(e) Finally, among the given elements, hydrogen (H) has the lowest electronegativity, followed by germanium (Ge), strontium (Sr), chlorine (Cl), and cesium (Cs), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Ge < Sr < Cl < Cs.

Learn more about electronegativity ,

https://brainly.com/question/17762711

#SPJ4

Here is the ranking of bonds and interactions in a living cell from strongest to weakest: Covalent bonds, Ionic bonds, Hydrogen bonds, Van der Waals interactions.

The strongest to weakest links and interactions in a live cell are listed below:

For such more question on Ionic bonds:

https://brainly.com/question/977324

#SPJ11

The following question may be like this:

What is the order of bonds and interactions from the strongest to the weakest?

(Covalent, Van der Waals interaction, ionic bond, hydrogen bond)

Whereas physical changes entail a change in a substance's physical attributes without the creation of new substances, chemical changes involve the rearranging of atoms and the creation of new substances.

According to the concept of "The Lost Isle of Change," once a material experiences a chemical shift, it is difficult to restore it to its previous condition, much like an island that vanishes after it has sunk. Nonetheless, substances that are changing physically are frequently simple to reverse, much like an island that may reemerge as the sea recedes. In conclusion, physical changes frequently entail a change in physical attributes, whereas chemical changes involve the synthesis of new substances and are reversible. The irreversibility of chemical changes is symbolised by "The Lost Island of Change."

learn more about physical changes here:

brainly.com/question/17931044

#SPJ4

Full Question

What is the difference between chemical and physical changes, and how do they relate to the concept of "The Lost Isle of change"?

The small repeating units used to synthesize polymers are called monomers. These monomers are joined together through a chemical reaction known as polymerization, which results in the formation of long chains of polymers.

The properties of these polymers, such as their strength and flexibility, depend on the specific monomers used and the conditions under which the polymerization occurs. By varying the monomers used, scientists can create a wide range of polymers with different properties that are used in a variety of applications, from plastics and textiles to pharmaceuticals and medical devices.

In polymer synthesis, monomers are chemically bonded to form long chains called polymers. The process, called polymerization, involves the joining of many monomers together. Polymers can be natural, like DNA and cellulose, or synthetic, like plastics and rubber.

The properties of a polymer depend on the type of monomer(s) used and the structure of the polymer chains. Monomers can vary greatly in size and functionality, leading to a wide range of polymers with diverse characteristics and applications.

To know more about polymers visit:

https://brainly.com/question/17354715

#SPJ11

According to Newton's second law of motion, if force remains the same but mass increases, then acceleration will decrease.  Therefore, option (c) decrease is the correct answer.

This can be represented by the equation F=ma, where F is the force applied, m is the mass of the object, and a is the resulting acceleration. If the force is constant and the mass increases, the acceleration must decrease in order to maintain the equation's balance.   As the mass increases, it becomes more difficult for the force to accelerate the object at the same rate. The increased mass creates greater inertia, resisting changes in motion and resulting in a decrease in acceleration.

Learn more about Newton's second law

https://brainly.com/question/13447525?

#SPJ4

Full Question ;

According to newton's second law of motion, if force remains the same but mass increases, then acceleration will ______

a. increase

b. stay the same

c. decrease

d. not be measurable

The slow carbon cycle involves processes that take place over geological timescales, including the transfer of carbon between the atmosphere, oceans, rocks, and soils. The total amount of carbon in each of these reservoirs can change over time due to various factors, such as natural and human-induced processes.

One part of the slow carbon cycle in which the total amount of carbon is most likely decreasing the most is the process of sedimentation of organic matter in ocean sediments. This occurs because the organic matter that sinks to the seafloor is buried and undergoes diagenesis, a process by which it is transformed into more stable forms of carbon, such as kerogen or graphite. The decrease in carbon occurs because the rate of sedimentation of organic matter is faster than the rate of carbon input from sources such as volcanoes, weathering of rocks, and human activities.

Learn more about the carbon cycle here.

https://brainly.com/question/30633292

#SPJ1

When it comes to calculating and estimating the pH of a solution, it's important to understand the basic principles of pH and how it relates to the concentration of acids or bases.

pH is a measure of the acidity or basicity of a solution, with a range of 0-14. A pH of 7 is considered neutral, while a pH below 7 is considered acidic and above 7 is considered basic.
To estimate the pH of a solution, one can use a pH meter or pH paper. However, if these tools are not available, one can also estimate the pH by using indicators such as litmus paper or phenolphthalein. Additionally, the pH of a solution can be calculated using the formula pH = -log[H+], where [H+] represents the concentration of hydrogen ions in the solution.
When it comes to determining concentrations of strong and weak acids or bases, pH can be a helpful tool. Strong acids or bases will have a low pH or high pH, respectively, while weak acids or bases will have a pH that is closer to neutral. The concentration of a strong acid or base can be estimated by measuring the pH and using a conversion factor to convert the pH to a concentration value. For example, the concentration of a strong acid can be calculated using the formula [H+] = [tex]10^{-pH}[/tex].
On the other hand, determining the concentration of a weak acid or base is a bit more complicated. It involves calculating the dissociation constant (Ka or Kb) of the acid or base, as well as the initial concentration of the acid or base and its conjugate. This information can then be used to determine the pH of the solution and the concentration of the acid or base.
Overall, pH is a crucial factor in understanding the concentration of acids and bases in a solution and can be used to estimate and calculate these concentrations in a variety of situations.

To learn more about concentration, refer:-

https://brainly.com/question/10725862

#SPJ11

The results of the experiments can be said to be in line with the law of multiple proportions.

The law of multiple proportions states that when two elements combine to form two or more compounds, the ratio of the masses of one element that mix with a fixed mass of the other element can be expressed in whole numbers.

In the two experiments, it is obvious that the ratio of the copper to the oxygen in the compounds are almost the same and this is in line with the statement of the law of multiple proportions.

Learn more about multiple proportions:https://brainly.com/question/28458716

#SPJ1

Answer:

Algebra is the study of variables and the rules for manipulating these variables in formulas; it is a unifying thread of almost all of mathematics. Elementary algebra deals with the manipulation of variables as if they were numbers and is therefore essential in all applications of mathematics.

What is algebra used for?

Algebra teaches you to follow a logical path to solve a problem. This, in turn, allows you to have a better understanding of how numbers function and work together in an equation. By having a better understanding of numbers, you'll be better able to do any type of math.

Hope this helps :)

Pls brainliest...

In the given reaction N2 (g) + 3H2 (g) â 2NH3 (g), the reactants are N2 and H2, and the product is NH3.

During the course of the reaction, the reactants will decrease in concentration as they are being consumed to form the product. Therefore, both N2 and H2 will decrease in concentration. At the same time, the concentration of the product NH3 will increase.

The reaction stoichiometry tells us that one molecule of N2 reacts with three molecules of H2 to produce two molecules of NH3. This means that the decrease in concentration of N2 will be twice as much as the decrease in concentration of H2.

For such more question on reactants:

https://brainly.com/question/26283409

#SPJ11

The following question may be like this:

If only reactants are initially added to a reaction flask, which species decrease in concentration during the course of the reaction N2 (g) + 3H2 (g) â 2NH3 (g)? Select all that apply.

The given statement "A liquid is less fluid than a gas because 9 of 10. select choice attractions interfere with the ability of particles to flow past one another" is True.

A liquid is less fluid than a gas because of the intermolecular attractions that exist between its particles. In liquids, the molecules are more closely packed and have stronger intermolecular forces compared to gases. These intermolecular attractions interfere with the ability of the particles to flow past one another, making liquids less fluid than gases.

In gases, the particles are farther apart, and the intermolecular forces are weaker. The weak intermolecular forces between gas particles allow them to move freely and quickly, resulting in high fluidity. The particles can easily slide past one another, and the gas can fill any container it is placed in.

Therefore, due to the strong intermolecular forces present in liquids, their particles cannot flow past each other as easily as gas particles can. This results in liquids being less fluid than gases, and they take the shape of the container in which they are placed. In summary, the statement "a liquid is less fluid than a gas because 9 of 10 select choice attractions interfere with the ability of particles to flow past one another" is true.

To know more about liquids, refer to the link below:

https://brainly.com/question/25738515#

#SPJ11

The amount of energy absorbed by 2.00 L of gasoline as it is converted to the vapor phase at its boiling point is 38,550 J

Using the following formula:

q = m x ΔHvap

Volume= 2.00 L = 2000 mL

density of gasoline = 0.75 g/mL

mass = volume x density = 2000 mL x 0.75 g/mL = 1500 g

The enthalpy of vaporization of gasoline= 42.0 kJ/mol = 25.7 J/g

q = m x ΔHvap = 1500g x 25.7 J/g = 38,550 J

Learn more about energy on

https://brainly.com/question/13881533

#SPJ1

Atoms in radioactive materials naturally decay. They are capable of emitting gamma radiation, beta radiation, and alpha radiation.

Thus, They cannot be turned off, so controlling them is more challenging than controlling X-ray sources. Gamma radiation emitters that can be utilized for industrial radiography, like iridium 192, can be used to radiograph thick portions of steel and other metals.

These are also utilized within shielded enclosures, however because the sources cannot be electrically shut off, they are kept inside protected containers.

The source is projected from the container through a guide tube to the area of use, then retracted.

Thus, Atoms in radioactive materials naturally decay. They are capable of emitting gamma radiation, beta radiation, and alpha radiation.

Learn more about Radiation, refer to the link:
https://brainly.com/question/13934832

#SPJ1

Answer:

distance covered over a given amout of time is called velocity

The pH of the solution at equivalence is equal to 10.

A chemist titrates 25 mL of a 0.10 M hydrocyanic acid solution with 0.10 M NaOH solution at 25°C. The pKa of hydrocyanic acid is 9.2. Round your answer to two decimal places.

Note for advanced students: you may assume the total volume of the solution equals the initial volume plus the volume of NaOH solution added.

The pH of the hydrocyanic acid solution can be calculated using the Henderson-Hasselbalch Equation, which states that pH = pKa + log ([salt]/[acid]).

First, we need to calculate the amount of NaOH (salt) added to the solution. This can be done by multiplying the molarity (0.10 M) by the volume (25 mL) of hydrocyanic acid.

This yields 0.25 moles of NaOH. We can then plug this into the Henderson-Hasselbalch Equation, along with the pKa of hydrocyanic acid (9.2). Solving for pH yields 10.2. Since the volume of the solution increases when NaOH is added, but the molarity remains constant, the pH of the solution at equivalence is equal to 10.

Know more about Henderson-Hasselbalch Equation here

https://brainly.com/question/13423434#

#SPJ11

Ionic bonds typically produce a crystal matrix. In contrast, covalent bonds are formed between two individual atoms, giving rise to true, discrete molecules.

When two or more atoms share electron pairs, covalent bonds are formed. Depending on how many electron pairs are shared, covalent bonds can be single, double, or triple.

Depending on the difference in electronegativity between the two atoms, covalent bonds can either be polar or nonpolar. Partially charged atoms result from the unequal distribution of electrons in a polar covalent bond. There are no partial charges because the electrons in a nonpolar covalent bond are distributed uniformly.

Because the atoms involved are sharing electrons rather than totally transferring them, covalent connections are typically stronger than ionic ones overall.

For such more question on covalent:

https://brainly.com/question/3447218

#SPJ11

I- and Cl- are isoelectronic with Ar, as they both have the same number of electrons as the noble gas.

"Isoelectronic" means having the same number of electrons. Ar has 18 electrons, so we need to find ions that also have 18 electrons. Ba2+ has 56 electrons, so it's not isoelectronic. S2- has 18 electrons, so it is isoelectronic. Al3+ has 13 electrons, so it's not isoelectronic. K+ has 19 electrons, so it's not isoelectronic. Finally, I- and Cl- both have 18 electrons, so they are both isoelectronic with Ar.

Learn more about Isoelectronic here:

https://brainly.com/question/6807313

#SPJ11

When DNA is placed between the interface of both solutions, it goes through electrostatic interaction or electrostatic attraction.

As DNA is a negatively charged molecule DNA is placed between the interface of both solutions, it undergoes the electrostatic interaction. It interacts with the charged species present in the solution, such as cations (positively charged ions) and anions (negatively charged ions).

It interacts with both solutions and forms a layer of ions between the interface of the two solutions. It helps in the stabilization of the DNA in the interface layer.

In the case of water and ethanol solution, ethanol molecules interact with the hydrophobic bases of DNA, while the water molecules interact with the hydrophilic sugar-phosphate backbone. This stabilizes the DNA molecule at the interface of the two solutions.

Learn more about Electrostatic interaction is :

https://brainly.com/question/29788201

#SPJ4