based on their molecular structure, identify the stronger acid from each pair of oxyacids. match the words in the left column to the appropriate blanks in the sentences on the right.

The group being referred to in this question is Group 14 of the periodic table. This group includes carbon, silicon, germanium, tin, and lead. Out of these elements, only carbon is a semimetal, while the rest are metals. The correct option is 2.

When elements in Group 14 react, they typically form +4 cations, such as in the case of carbon forming carbon dioxide (CO2). However, elements in this group can also form +2 and +3 cations under certain conditions. For example, tin can form a +2 cation in certain compounds, while lead can form a +2 or +4 cation.

It is interesting to note that while carbon is a semimetal, it is also classified as a nonmetal due to its low reactivity and inability to conduct electricity in its pure form. Carbon is unique in this regard, as it has both metal and nonmetal characteristics depending on its chemical environment.

In conclusion, the element in Group 14 that is a semimetal is carbon, while the other elements in the group are metals that typically form +4 cations.

To know more about periodic table, refer to the link below:

https://brainly.com/question/11155928#

#SPJ11

Zn + 2Cl- → ZnCl₂ (ionic equation)

Zinc is described as being oxidised in this reaction because it loses electrons to form positively charged zinc ions (Zn²+). In other words, zinc is being oxidised from its elemental state to an ionised state.

When CH3CH2OH is refluxed with acidified potassium dichromate(VI), the final product that is formed is CH3COOH, which is also known as acetic acid.

This reaction is commonly used in organic chemistry as a test for primary alcohols, as they are oxidized to aldehydes and then to carboxylic acids, while secondary alcohols are oxidized to ketones. Potassium dichromate(VI) acts as an oxidizing agent in this reaction, meaning that it accepts electrons from the alcohol and becomes reduced to a different compound. The reaction proceeds through several steps, including the formation of aldehydes and eventually the carboxylic acid. Therefore, the correct answer to the question is option C, CH3COOH. It is important to note that this reaction should be carried out in a fume hood or with proper ventilation, as the use of potassium dichromate(VI) can be dangerous due to its toxicity and potential to form harmful gases.

Learn more about potassium dichromate here

https://brainly.com/question/14049010

#SPJ11

Students would stand to model the molecules in a solid against the classroom wall. Therefore, the correct option is option C.

According to the context, the term could refer to any ions that meet this requirement. A molecule is a collection of at least two atoms linked together by the attractive forces referred to as chemical bonds.

When speaking of polyatomic ions. Students would stand to model the molecules in a solid against the classroom wall.

Therefore, the correct option is option C.

To know more about molecule, here:

https://brainly.com/question/19922822

#SPJ1

Your question is incomplete but most probably your full question was,  

Mrs. Jones' class was learning about how molecules are arranged in solids, liquids, and gases. To model molecules in liquids, she had the students stand one meter apart.

Which ,begin emphasis,best,end emphasis, describes how the students would stand to model the molecules in a solid?

Answer options with 5 options

A.

as far apart as possible

B.

in rows one meter apart

C.

as close as possible

D.

against the classroom wall

E.

five meters apart

If the neutron is at rest when it decays, it will release an electron and a neutrino. The process is known as beta decay, and it occurs when a neutron is converted into a proton.

During this conversion, one of the neutron's down quarks is converted into an up quark, releasing a W- boson that decays into an electron and a neutrino.

The neutrino that is released is always an electron neutrino, which is a type of neutrino that interacts weakly with matter. This means that it can travel through vast amounts of material without being detected. On the other hand, the electron that is released is a charged particle that interacts strongly with matter and is therefore much easier to detect.

In summary, if a free neutron is at rest when it decays, it will release an electron and an electron neutrino. This is a fundamental process in nuclear physics and has important applications in fields such as nuclear power and astrophysics.

To know more about beta decay click here:

https://brainly.com/question/27770519

#SPJ11

Human insulin will not exhibit cold denaturation at any temperature greater than 0°C.

To calculate the free energy change for unfolding human insulin at 37°C, we can use the equation:

ΔG = ΔH - TΔS

where ΔH is the enthalpy change, T is the temperature in Kelvin, and ΔS is the entropy change.

First, we need to calculate the entropy change, ΔS. We can use the equation:

ΔS = ΔH / Tm

where Tm is the melting temperature in Kelvin.

Converting the given values to the appropriate units, we have:

Tm = 68.7 + 273.15 = 341.85 K

ΔH = 95.8 kJ/mol

ΔCp,m = 5 kJ/mol K

Using the equation ΔS = ΔH / Tm, we get:

ΔS = (95.8 kJ/mol) / (341.85 K) = 0.280 kJ/mol K

Next, we can use the equation ΔG = ΔH - TΔS and plug in the given values to get:

ΔG = (95.8 kJ/mol) - (310.15 K)(0.280 kJ/mol K) = 14.6 kJ/mol

Therefore, the free energy change for unfolding human insulin at 37°C is 14.6 kJ/mol.

To determine whether the protein will exhibit cold denaturation at any temperature greater than 0°C, we can use the equation:

Tc = (ΔH / ΔS) + Tm

where Tc is the temperature at which cold denaturation would occur. IfTc is less than 0°C, then cold denaturation would not occur.

Using the given values, we have:

Tc = (95.8 kJ/mol / 0.280 kJ/mol K) + 341.85 K = 699.6 K

Converting this back to Celsius, we get Tc = 426.5°C, which is much higher than 0°C. Therefore, human insulin will not exhibit cold denaturation at any temperature greater than 0°C.

Learn more about Human insulin

https://brainly.com/question/14234384

#SPJ4

Adding CH4 to the exothermic reversible reaction at equilibrium will cause the reaction to shift to the left, favoring the formation of C(s) and 2H2(g).

To understand how adding CH4 will affect the equilibrium, we can use Le Chatelier's Principle, which states that if a change is made to a system at equilibrium, the system will adjust itself to counteract that change and restore the equilibrium.

The reaction is represented as:

C(s) + 2H2(g) ⇌ CH4(g)

In this case, the change is an increase in the concentration of CH4. According to Le Chatelier's Principle, the equilibrium will shift in the direction that decreases the concentration of CH4. In this reaction, that means the equilibrium will shift to the left, favoring the formation of the reactants C(s) and 2H2(g). This will continue until a new equilibrium is established.

So, the exothermic reversible reaction that is at equilibrium will move to the left when CH4 is added, favoring the synthesis of C(s) and 2H2(g).

Learn more about Le Chatelier's Principle: https://brainly.com/question/2943338

#SPJ11

Equal numbers and types of each atom appear on both sides of balanced chemical equations.

Thus, A balanced equation must have coefficients that are the simplest whole number ratio. Chemical reactions always conserve mass.

An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same number of atoms and total charge for each component of the reaction.

In other words, both sides of the reaction have an equal balance of mass and charge. Conservation of charge and mass, balancing the equation, balancing the reaction.

Thus, Equal numbers and types of each atom appear on both sides of balanced chemical equations.

Learn more about Balance equation, refer to the link:

https://brainly.com/question/7181548

#SPJ1

The reaction for Carbon-14, used in carbon dating, decays by beta emission and in Uranium-238 decays by alpha emission.

Alpha radiation releases when the nucleus of an atom becomes unstable and alpha particles are released in order to restore stability. Alpha decay occurs in elements have high atomic numbers, such asuranium, radium, and thorium etc. The reaction that describes an alpha emission because radiations are 5740 years. Now, Carbon-14 has a half life of 5730 yrs, and it used to date fossils of 50 hundred yrs old. It undergo beta emission. In case of Uranium- 238, has half life of 236 yrs. Because there is so much difference between half lives of both so we can't use both of together in one reaction. So, it goes on alph emission. The reactions are

¹⁴₆C → ¹⁴₇N - e⁻

Hence, required reaction is alpha emmision.

For more information about alpha emission, visit :

https://brainly.com/question/27875918

#SPJ4

The Kc, for the reaction BaSO4(s) ↔ Ba2+(aq) + SO42-(aq) can be written as follows Kc = [Ba2+] [SO42-]/[BaSO4] Here, the numerator represents the concentration of the products, Ba2+ and SO42-, at equilibrium, while the denominator represents the concentration of the reactant, BaSO4, also at equilibrium.

The numerator or denominator is 1, the corresponding term can be omitted from the expression, as it would not affect the value of Kc. For example, if the concentration of BaSO4 at equilibrium is 1 M, the denominator of the expression would be equal to 1, and could be omitted Kc = [Ba2+] [SO42-] However, if the concentrations of all species at equilibrium were equal to 1, the value of Kc would also be 1, as shown below Kc = [Ba2+][SO42-]/[BaSO4] = (1)(1)/(1) = 1 In general, the value of Kc provides information about the extent of a chemical reaction at equilibrium, with larger values indicating that the products are favored, and smaller values indicating that the reactants are favored.

learn more about equilibrium here.

https://brainly.com/question/30694482

#SPJ11

The stoichiometric concept is used here to determine the moles of Aluminium used. Stoichiometry is an important concept in chemistry which helps us to use balanced chemical equation to calculate the amount of reactants and products.

Chemical stoichiometry refers to the quantitative study of the reactants and products involved in a chemical reaction. It help us to determine how much substance is needed or is present.

The balanced equation is:

4Al  +  3O₂     →     2Al₂O₃

1.35 mol O₂ × 4 mol Al / 3 mol O₂ = 1.8 mol Al

To know more about stoichiometry, visit;

brainly.com/question/19642113

#SPJ1

The use of different concentrations for sulfuric acid and sodium hydroxide in Part I of the experiment is due to the differences in their properties and reactivity. Sulfuric acid is a strong acid and is highly reactive, so a lower concentration of 3 M is used to prevent excessive reaction with the samples being tested.

On the other hand, sodium hydroxide is a strong base and is also highly reactive, but a higher concentration of 6 M is used to ensure that there is enough reactivity to complete the neutralization reaction with the acidic samples. The concentration of a solution plays a critical role in determining the reaction rate and extent of the chemical reaction. When the concentration of a reactant is increased, it provides more molecules for the reaction to occur, leading to an increase in the reaction rate. Therefore, the use of different concentrations for sulfuric acid and sodium hydroxide is essential to achieve accurate results and ensure that the neutralization reaction is completed within a reasonable time frame.

Learn more about sodium hydroxide here-

https://brainly.com/question/29327783

#SPJ11

The term "plastic" is often used as a synonym for synthetic polymer.

A synthetic polymer is a big molecule comprised of repeated monomeric building blocks. Long chains made of these monomers are created by chemically bonding them together.

These chains can then be processed to create a range of useful materials. Plastic bags and bottles, high-tech materials used in aircraft, and medical devices—there are many uses for synthetic polymers.

Modern society has been significantly impacted by the usage of synthetic polymers, which offer affordable and adaptable materials in place of more expensive and conventional ones.

Due to the slow breakdown of plastic materials, however, the disposal of plastic trash has also grown to be a significant environmental concern.

Overall, because to the widespread usage of plastic products in our daily lives, the word "plastic" has come to be synonymous with synthetic polymer.

For such more question on polymer:

https://brainly.com/question/1602388

#SPJ11

The variable that needs to be changed is the temperature at which each bean is kept, hence the correct option is Option D.
This is because the experiment focuses to evaluate the temperature at which a bean sprout grows the fastest. Then, the temperature is the independent variable that  would change to see how it affects the growth rate of the bean sprouts.
There are several factors that can affect plant growth. Such as
1. Light - Plants require light for photosynthesis, which is crucial for their growth and development.

2. Temperature - Plants have an optimal temperature range for growth and development. Extreme temperatures can provide stress and damage to plants.

3. Water - Water is essential for plant growth and development.

4. Humidity - Humidity levels can hamper the plant's growth and development. High humidity levels can remove fungal growth and disease.

To learn more about growth rate
https://brainly.com/question/30611694
#SPJ4

The safest procedure for getting the driver out of the vehicle in this situation would be to instruct the individual to slowly step out of the vehicle. Option B

Avoid making personal contact with the car or the driver since they could be electrically charged from the power line. To reduce their contact with the car and any potential electrical current, tell the driver to get out of the car gently.

Jumping can force the driver to make quick, abrupt motions that could put them in more touch with the electrical current, making Option A unsafe.

Option C is also risky because cutting the power wire from the hood can result in an electrical discharge that could be harmful to the driver or anyone else around.

Option D is also risky because it may result in electrocution of the rescuer.

Learn more about driver:https://brainly.com/question/10854026

#SPJ1

To determine if ethylene glycol n-butyl ether-water is one or two-phase system, we need to compare the tie-line length and the lever rule calculation. A single stable liquid phase with a mass fraction of 30% ethylene glycol n-butyl ether and 70% water is present at equilibrium.

Assuming that the system follows Raoult's law and that the activity coefficients are equal to one, we can use the following equation to calculate the tie-line length:

Tie-line length = (x2 - x1) / (y1 - x1)

where x1 and x2 are the mole fractions of water in the liquid phase and vapor phase, respectively, at the two-phase boundary, and y1 is the mole fraction of water in the liquid phase at the point where the tie-line intersects the tie-line axis.

Using the given data, we can calculate the mole fraction of water in the liquid phase at the two-phase boundary as follows:

x1 = 0.3 (given)

x2 = 1 - x1 = 0.7

y1 = x1 = 0.3 (assuming the vapor phase is pure water)

Substituting these values into the tie-line equation, we get:

Tie-line length = (0.7 - 0.3) / (0.3 - 0.3) = 0

Since the tie-line length is zero, the system is a single-phase liquid, and there is no two-phase region. Therefore, the answer is that the system is one stable liquid phase at equilibrium, with a mass fraction of water of 70% and a mass fraction of ethylene glycol n-butyl ether of 30%.

To know more about the two-phase system refer here :

https://brainly.com/question/15407961#

#SPJ11

1.47g is the mass in gram of KClO[tex]_3[/tex] that are needed to make 293 gO[tex]_2[/tex]. A body's mass is an inherent quality. Prior to the discoveries of the atom or particle physics.

A body's mass is an inherent quality. Prior to the discoveries of the atom or particle physics, it was widely considered to be tied to the amount of matter within a physical body. It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses.

There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent. The resistance of the body to deceleration (change of velocity) whenever a net force is applied can be measured experimentally as mass.

2KClO[tex]_3[/tex] →2KCl + 3O[tex]_2[/tex]

Molar mass of KClO[tex]_3[/tex]  = 122.55g/mol

3.76/122.55= 0.031mol

Mole ratio KClO3:O2 = 2:3

= 0.031×3/2

= 0.046m

= 0.046× 31.998

= 1.47g

To know more about mass, here:

https://brainly.com/question/6199002

#SPJ1

The statement that is NOT true about the electrical charges in chemistry is:
B. In an atom, the number of protons and neutrons must be equal.

In an atom, protons carry a positive charge (A) and are found in the nucleus, along with neutrons, which carry no charge. Electrons, which carry a negative charge, orbit the nucleus. An atom is neutral when the positive and negative charges balance (C), meaning the number of protons equals the number of electrons.

However, the number of protons and neutrons does not have to be equal in an atom. The difference in the number of neutrons between atoms of the same element creates isotopes. The number of protons determines the element's identity, while the number of neutrons can vary.

An ion (D) is an atom or molecule that has an unequal number of protons and electrons, resulting in a net positive or negative charge. When an atom loses or gains electrons, it becomes an ion. Cations are ions with a net positive charge (due to loss of electrons), while anions are ions with a net negative charge (due to gain of electrons).

Learn More about atomhere :-

https://brainly.com/question/16666188

#SPJ11

Diphenyl phosphate. In the renewable block copolymer experiment, diphenyl phosphate is the reagent that needs to be weighed accurately to obtain a molecular weight closer to the theoretical value.

This is because diphenyl phosphate is used as the initiator for the polymerization reaction, and any deviation in its weight can significantly affect the molecular weight of the final product. The other reagents, d-decalactone and benzene di methanol, also play important roles in the reaction but do not have as significant of an impact on the final molecular weight when their quantities are slightly off.
In order to obtain the molecular weight closer to the theoretical value in the renewable block copolymer experiment, it is important to weigh the following reagents very accurately: B) d-decalactone and C) benzene dimethanol. Accurate weighing of these reagents ensures a proper reaction stoichiometry, leading to a more controlled molecular weight of the resulting copolymer.

Visit here to learn more about Diphenyl phosphate:

brainly.com/question/2273216

#SPJ11

Polymers that are formed by a combination of functional groups such that a small molecule (e.g., water) is eliminated are known as condensation polymers.

A macromolecule is produced during polymerization by chemically combining smaller molecules, known as monomers or building blocks. A polymer is made up of a great number of these macromolecules.

Covalent bonds are used to join the monomers together to create polymers, which are bigger molecules. Monomers produce water molecules as byproducts as a result of this process. Dehydration synthesis, which literally translates to "to put together while losing water," is the term used to describe this kind of process.

To know more about Condensation polymers visit:-

https://brainly.com/question/10401532

#SPJ11

Hi, I'm happy to help you compare the reactivity of methyl benzoate and phenol under bromination conditions. Methyl benzoate (an ester) is less reactive than phenol (an alcohol) in bromination reactions. This is because the ester group (COOCH3) in methyl benzoate is a deactivating group, withdrawing electron density from the benzene ring and making it less nucleophilic.

Conversely, the hydroxyl group (OH) in phenol is an activating group, donating electron density to the benzene ring and increasing its nucleophilicity.
To further understand this, we can draw out the complete structures of both molecules and analyze the lone pairs. Methyl benzoate has a lone pair on the oxygen atom of the ester group, which participates in resonance with the carbonyl group, decreasing electron density on the benzene ring. Phenol has a lone pair on the oxygen atom of the hydroxyl group that can resonate with the benzene ring, increasing electron density and making it more susceptible to electrophilic aromatic substitution reactions like bromination.

For more information on Methyl benzoate see:

https://brainly.com/question/10213530

#SPJ11

The gas with the higher boiling point is neon, and this is because it has more electrons. Option D is the answer.

Intermolecular forces, molecular size, and molecular weight are a few of the variables that affect boiling point. At standard temperature and pressure (STP), hydrogen and neon are both gases, although their boiling points are different.

Neon has a monatomic structure (Ne) and is a noble gas. Noble gases are extremely stable and chemically inert because they have entire valence electron shells. Due to transient changes in electron distribution, neon atoms are bound together by weak London dispersion forces.

Stronger intermolecular forces are a result of neon's higher electron density when compared to hydrogen. Because of these stronger forces, neon has a higher boiling point than hydrogen because they need more energy to overcome.

Learn more on boiling point of gases here https://brainly.com/question/30218459

#SPJ1

The equivalents of h are present in a 0.25 m solution of hcl is 0.25 eq.

HCl is a strong electrolyte, which means it completely dissociates into its ions when dissolved in water. In this case, it dissociates into H⁺ and Cl⁻ ions. The term "equivalent" is used to express the amount of an ion in a solution. One equivalent of an ion is equal to the number of moles of that ion that can combine with or displace one mole of hydrogen ions (H⁺).

To determine the number of equivalents of H⁺ ions present in a 0.25 M solution of HCl, we first need to calculate the number of moles of HCl present in 1 liter of the solution:

0.25 M HCl = 0.25 moles of HCl per liter of solution

Since HCl dissociates into one H⁺ ion and one Cl⁻ ion, there are also 0.25 moles of H⁺ ions per liter of solution. To convert this to equivalents, we need to divide by the number of moles of H⁺ ions that can combine with or displace one mole of H⁺ ions, which is 1:

0.25 moles H⁺ ions / 1 mole H⁺ ions per equivalent = 0.25 equivalents of H⁺ ions per liter of solution

Therefore, by concluding we can say that the answer to the question is 0.25 eq.

To know more about the equivalents refer here :

https://brainly.com/question/30310995#

#SPJ11

The reaction that represents displacement reaction is 1, 2, 3 and 4 (option F)

This is a reaction in which element which are higher in the electro-chemical series displaces or replace element which are lower in the series. Displacement reaction are of two types:

Now, we shall consider the various reaction given. Details below:

For reaction 1:

Fe + SnSO₄ -> FeSO₄ + Sn

We can see that Fe has displaced Sn. Thus the reaction is a displacement reaction

For reaction 2:

Cl₂ + 2KBr -> Br₂ + 2KCl

We can see that Cl₂ has displaced Br₂. Thus the reaction is a displacement reaction

For reaction 3:

H₂SO₄ + Mg -> MgSO₄ + H₂

We can see that Mg has displaced H₂. Thus the reaction is a displacement reaction

For reaction 4:

NaHCO₃ + HCl -> NaCl + CO₂ + H₂O

The above reaction is a double displacement reaction since there is an exchange of ions between NaHCO₃ and HCl to produce NaCl, CO₂ and H₂O

Thus, we can conclude that reaction 1, 2, 3 and 4 is a displacement reaction (Option F)

Learn more about displacement reaction:

https://brainly.com/question/11904766

#SPJ1

The mathematical relationship between pH and concentration for a strong acid, considering the log function used when calculating pH, is as follows:

The pH of a solution is defined as the negative logarithm (base 10) of the hydrogen ion (H+) concentration. Mathematically, it is expressed as:

pH = -log10[H+]

For a strong acid, it completely dissociates in water, which means the concentration of hydrogen ions (H+) will be equal to the concentration of the strong acid itself. Let's represent the concentration of the strong acid as [A-].

Therefore, in the case of a strong acid, the mathematical relationship between pH and concentration is:

pH = -log10[A-]

This equation shows that as the concentration of the strong acid increases, the pH value decreases, indicating a more acidic solution. Conversely, as the concentration of the strong acid decreases, the pH value increases, indicating a less acidic (or more alkaline) solution.

To know more about the strong acid refer here :

https://brainly.com/question/31143763#

#SPJ11

Under standard conditions (298 K and 1 atm), neither diamond nor graphite spontaneously converts to the other form. The conversion between diamond and graphite is a slow process that requires high temperature and pressure, and cannot occur spontaneously under standard conditions.

To reverse the spontaneity of the reaction, the temperature and/or pressure conditions can be changed. For example, if the temperature is increased to a sufficiently high value and the pressure is also increased, diamond can convert to graphite spontaneously. On the other hand, if the temperature is decreased to a low value and the pressure is also decreased, graphite can convert to diamond spontaneously.
The conversion between diamond and graphite is a type of phase transition, which involves a change in the arrangement of atoms in a material. In general, phase transitions occur when the energy of the system is lowered by changing the arrangement of its constituents. For diamond and graphite, the energy difference between the two forms is relatively small, which makes the conversion between them possible at high temperatures and pressures.
In summary, under standard conditions, neither diamond nor graphite spontaneously converts to the other form. To reverse the spontaneity of the reaction, the temperature and/or pressure conditions can be changed. The conversion between diamond and graphite is a type of phase transition that occurs when the energy of the system is lowered by changing the arrangement of its constituents.

for more such questions on spontaneously

https://brainly.com/question/29315358

#SPJ11

Answer:

sharing of valence electron pairs

This form, which is frequently used to depict the bonding between atoms in a molecule, is also known as the Lewis structure or the Lewis dot diagram.

An electron is defined as a subatomic particle of negative charge, which surrounds the nucleus of the atom (there are neutrons and protons).

The localized electron model assumes that a molecule is bonded through the sharing of valence electron pairs. This model is also known as the Lewis structure or the Lewis dot diagram, which is commonly used to represent the bonding between atoms in a molecule. In this model, each atom's valence electrons are shown as dots, and the shared electron pairs between atoms are represented by a line. The localized electron model helps to explain the formation of covalent bonds in molecules.

Learn more about electrons on:

https://brainly.com/question/13998346

#SPJ11

Answer: clockwise north

Explanation:

A high pressure system has higher pressure at its center than the areas around it. Winds blow away from high pressure. Swirling in the opposite direction from a low pressure system, the winds of a high pressure system rotate clockwise north of the equator and counterclockwise south of the equator. This is called anticyclonic flow. Air from higher in the atmosphere sinks down to fill the space left as air is blown outward. On a weather map, you may notice a blue H, denoting the location of a high pressure system.

Answer:

A possible formula for compound X is option (B) CH3CH2CH2OH.

Explanation:

This is because compound X must be an alcohol that can be oxidized to form a carboxylic acid (compound Y), and propan-1-ol is the only alcohol among the given options that fits this description. The oxidation of propan-1-ol with acidified potassium dichromate (VI) produces propanoic acid (compound Y), which is an acidic compound that reacts with sodium carbonate to produce CO2 gas.

Therefore, the information provided in the question allows us to deduce the formula of compound X and identify the products of the reactions it undergoes with acidified potassium dichromate (VI) and sodium carbonate.

To learn about the dichromate (VI),

https://brainly.com/question/31433286

https://brainly.com/question/31327742