Calculate the mass of naphthalene required to react stoichiometrically with the moles of 2-bromo-2-methylpropane that you have placed in the flask. Dispense that quantity of naphthalene into the weighing dish. There is some imprecision in delivering the powder onto the weigh boat, but a mass within 0. 040 g of the calculated stoichiometric quantity will be sufficient for this experiment. Note that you can use a combination of the 1 g and the 0. 1 g buttons to add the required mass. If you overshoot the goal, you can dis

71.86 grams of Fe2O3 can form from 21.6 grams of O2.

To determine the amount of Fe2O3 that can form from 21.6 g of O2, we need to use the balanced chemical equation and the stoichiometry of the reaction.

According to the balanced chemical equation:

4 Fe(s) + 3 O2(g) → 2 Fe2O3(s)

The stoichiometric ratio of O2 to Fe2O3 is 3:2. This means that for every 3 moles of O2, 2 moles of Fe2O3 are produced.

To calculate the amount of Fe2O3 formed, we need to first convert the mass of O2 given to moles:

n(O2) = m(O2) / M(O2)

where:

Next, we can use the stoichiometric ratio to calculate the number of moles of Fe2O3 formed:

n(Fe2O3) = 2/3 x n(O2)

n(Fe2O3) = 2/3 x 0.675 mol = 0.450 mol

Finally, we can convert the number of moles of Fe2O3 to grams using its molar mass:

m(Fe2O3) = n(Fe2O3) x M(Fe2O3)

where:

Therefore, 71.86 grams of Fe2O3 can form from 21.6 grams of O2.

Read more about molar mass here:

https://brainly.com/question/21334167

#SPJ1

How many grams of [tex]Fe_2O3[/tex] can form from 21.6g of [tex]O_2[/tex]

[tex]4Fe(s) + 3O_2(g) -------- > 2Fe_2O_3(s)[/tex]

Answer:

Explanation:

Ca++

CO3--

CaCO3

The temperature of 4.5 moles of nitrogen gas when it has a pressure of 4.5 atm and a volume of 3L is 36.6 K.

PV = nRT is the formula for the ideal gas equation. In this equation, P denotes the ideal gas's pressure, V the volume of the ideal gas, n the total amount of ideal gas measured in moles, R the universal gas constant, and T the temperature.

We have,

PV = nRT

4.5 x 3 = 4.5 x 0.082 x T

T = 3/0.082

T = 36.6 K

An equation that matches the product of a gas's pressure and volume to the product of its thermodynamic temperature and the gas constant. For an ideal gas, the equation is accurate, but for actual gases at low pressures, it is a decent approximation. Also known as the ideal gas equation and the ideal gas law.

Numerous gases, including nitrogen, oxygen, hydrogen, noble gases, heavier gases like carbon dioxide, and mixes like air, can be regarded as ideal gases within tolerable tolerances across a wide parameter range centred on normal temperature and pressure.

Learn more about Temperature:

https://brainly.com/question/29501793

#SPJ4

Answer:2.78 moles water

50 g / 18 g water(get from the periodic table)

Explanation:

Answer:
O2 gas has low solubility in water because oxygen is a non-polar molecule whereas H2O (or water) is polar (due to the unequal sharing of electrons between the atoms and the unsymmetrical shape of the molecule - with a bent molecular structure).

Explanation:

Oxygen gas is a diatomic molecule, meaning that is has 2 oxygen molecules that are linked using a double bond. As a result, O2 gas can only dissolve in water (or H2O) by way of a dipole-induced dipole interaction or Van Der Waals. Another reason may be that O2 gas is covalently bonded (can't form ions) whereas H2O is ionically bonded with one another.

Oxygen gas has low solubility in water according to polarity and non polarity theory.

Solubility is the amount of solute that can be dissolved in a solvent. Generally, the solubility of most solutes increases with an increase in the temperature of the solvent.

The property that can help sugar molecules or salt crystals to dissolve is known as solubility.

Factors that affect solubility include:

Concentration of the solute

Temperature

Pressure

Polarity of the solute and the solvent

It has been observed that like molecules dissolve in like solvent. Polar molecules can only be soluble in polar solvent. Water is a polar solvent but Oxygen molecule is linear molecule with only Oxygen atoms hence no polarity.

Therefore, Oxygen gas has low solubility in water according to polarity and non polarity theory.

Learn more about solubility, here:

https://brainly.com/question/28170449

#SPJ2

In mathematics, a dimension is the length or width of an area, region, or place in one way.

The minimal number of numbers required to describe any location within a mathematical space (or object) is known as the dimension in physics and mathematics.  Because only one coordinate is required to describe a position on a line, such as the point at 5 on a number line, a line is said to have one dimension (1D).

Because two coordinates are necessary to define a point on a surface, such as the perimeter of a sphere or cylinder, it is referred to as having a dimension of two (2D). For instance, a point on the surface of a sphere requires both a latitude and a longitude to be located.

learn more about dimension

https://brainly.com/question/28688567

#SPJ1

In the decomposition of hydrogen peroxide, you follow the reaction by studying the production of oxygen gas in a wash bottle, which displaces water out of the bottle. The location where you should measure the temperature to characterize the gas is about two inches above the bottle.

The decomposition of hydrogen peroxide is the process of breaking down hydrogen peroxide into water and oxygen. This reaction occurs spontaneously in the presence of light or in the presence of a catalyst. Hydrogen peroxide is a strong oxidizing agent that is widely used in industry and medicine.

You should measure the temperature of the gas about two inches above the bottle to characterize the gas. Since the production of oxygen gas takes place in the wash bottle and displaces water out of the bottle, the displaced water is not a good location to measure the temperature. Similarly, the temperature of the gas cannot be measured inside the test tube or in the liquid in the bottle. To obtain an accurate measurement of the temperature of the gas produced in the reaction, you should measure the temperature of the gas about two inches above the bottle. This is because the temperature of the gas will be closest to the actual temperature of the gas in this location.

Know more about Hydrogen peroxide

https://brainly.com/question/25566753

#SPJ11

The partial pressure of oxygen (O₂) in the mixture is 0.15 atm.

The partial pressure of oxygen (O₂) can be found using the equation:

Total pressure = Partial pressure of O₂ + Partial pressure of CO₂ + Partial pressure of N₂

Or, mathematically:

P_total = P_O₂ + P_CO₂ + P_N₂

We are given that the total pressure is 0.97 atm, the partial pressure of CO₂ is 0.70 atm, and the partial pressure of N₂ is 0.12 atm. Substituting these values into equation, we get:

0.97 atm = P_O₂ + 0.70 atm + 0.12 atm

Simplifying:

0.97 atm = P_O₂ + 0.82 atm

Subtracting 0.82 atm from both sides:

0.97 atm - 0.82 atm = P_O₂

0.15 atm = P_O₂

To know more about partial pressure here

https://brainly.com/question/13199169

#SPJ4

Steel fibers bridge the crack at very small crack openings, transfer stresses and develop post crack strength in the concrete.

Nowadays, flexural strength, crack resistance, and explosion resistance are increased by using short length steel wire or thin steel sheets. Steel fibre is the name of this unique reinforcement, and the resulting concrete is steel fibre reinforced concrete.

In order to study the effects of steel fibre and the volume content ratio of fibre on the compressive, splitting, and tensile strengths of high-strength lightweight aggregate concrete (HLAC), three different types of steel fibers—micro (M), end-hooked (H), and corrugated (C)—that are frequently used in engineering applications are added to HLAC.

To know more about Steel fibers visit:-

brainly.com/question/28024695

#SPJ1

Oxidation is the process of using oxygen to break down organic compounds in the water, such as certain chemicals, pesticides, and metals. This helps to make.

Oxygen is an essential element for all living things. It is a colorless, odorless, tasteless gas found naturally in air and is the most abundant element in the Earth’s atmosphere. Oxygen is a key component in the respiration process, allowing organisms to convert the energy stored in food into energy they can use. Without oxygen, life as we know it would cease to exist. Oxygen is also necessary for combustion, which allows us to use fire and fuel to power our homes, cars, and other technology. Oxygen is an incredibly important element and without it, nothing could survive.

1. Filtration: Filtration is an important step in treating water to make it safe for drinking. It involves passing the water through a filter to remove any impurities, such as dirt and other particles.

2. Disinfection: Disinfection is the process of using chemicals, such as chlorine, to kill any bacteria and other microorganisms in the water. This is an important step for making water safe for drinking.

3. pH Adjustment: pH is a measure of the acidity or alkalinity of a solution. If the pH of the water is not within the safe range, it can be adjusted using chemicals to make it safe for drinking.

4. Coagulation and Flocculation: Coagulation and flocculation involve adding chemicals to the water to bind together particles of dirt and other impurities. This makes it easier to remove them during the filtration process.

To learn more about oxygen

https://brainly.com/question/28009615

#SPJ9

Answer:

The answer is B!

Explanation:

Its a Neutral Atom.

Answer:

The chemical formula "4H3O2" represents four molecules of the compound H3O2.

The formula H3O2 can be written as (H2O) + H2O, meaning it is a combination of one water molecule (H2O) and an additional hydrogen ion (H+). The hydrogen ion (H+) is an atom of hydrogen that has lost its electron, so it has a charge of +1.

Each molecule of H3O2 contains two hydrogen atoms - one from the water molecule and one from the hydrogen ion. So, to find the total number of hydrogen atoms in 4H3O2, we need to multiply the number of hydrogen atoms per molecule by the number of molecules:

2 hydrogen atoms/molecule x 4 molecules = 8 hydrogen atoms

Therefore, there are 8 hydrogen atoms in the formula 4H3O2.

Explanation:

Answer:

An open flask half-filled with water at 25°C will eventually reach phase equilibrium as the water molecules at the surface evaporate and enter the air, while some air molecules dissolve into the water. Eventually, the rate of evaporation will equal the rate of condensation, and the system will reach dynamic equilibrium.

The time it takes to reach phase equilibrium depends on various factors such as the surface area of the water, the temperature, humidity, and air movement. In a still room with a moderate humidity level, it may take several hours for the water to reach phase equilibrium. However, in a hot, dry, and windy environment, the equilibrium could be reached much faster, perhaps in a matter of minutes.

Explanation:

Answer:

Milk

Explanation:

We aren't given the temperature and pressure conditions, so we must assume standard conditions of room temperature and 1 atmoshere pressure.

ice cubes   NO.  By definition, they are solid water.

milk            YES, it is an emulsion, but still a liquid (not a solution)

rock           NO, unless it is coming from a volcano

fog             No, fog is small condensed water vapor droplets.

rain            No, liquid

oxygen     No, gas

9. The equation that represents a double replacement reaction is option B. CaBr₂+Na₂C0₂ ⃗ CaCO₃+2NaBr. 10. The chemical equation that is balanced correctly is option C. B₂ O₃ + 2C - B₄C+CO. 11. An unbalanced chemical equation is shown below:

_H₃BO₃ - _B₂O₃ + H₂O. The coefficients of the balanced equation is option D. 3:2:2

The equation that represents a double replacement reaction is:

CaBr₂ + Na₂CO₃ → CaCO₃ + 2NaBr (Option B)

The balanced chemical equation is the one that has the same number of atoms of each element on both the reactant and product sides. Among the options provided, option A, B, and D are unbalanced equations, while option C is balanced. Therefore, option C is the correct answer.

The coefficients of the balanced chemical equation for the given unbalanced equation (_H₃BO₃ - _B₂O₃ + H₂O → ) are:

3H₃BO₃ - 2B₂O₃ + 3H₂O (Option D)

learn more about chemical equation: https://brainly.com/question/26694427

#SPJ1

Answer:

I think...

Locked away in glaciers and ice caps.

a) To convert 1.65 moles of magnesium chloride to grams, we need to first determine the molar mass of MgCl.

The molar mass of MgCl is the sum of the atomic masses of magnesium and chlorine:

Mg: 24.31 g/mol

Cl: 35.45 g/mol

Molar mass of MgCl = 24.31 g/mol + 35.45 g/mol = 59.76 g/mol

Now, we can use the molar mass to convert 1.65 moles to grams:

1.65 moles x 59.76 g/mol = 98.70 grams

Therefore, 1.65 moles of MgCl is equal to 98.70 grams.

b) To convert grams of Na2CO3 to moles, we need to first determine the molar mass of Na2CO3.

The molar mass of Na2CO3 is the sum of the atomic masses of sodium, carbon, and oxygen, taking into account the two sodium atoms in each molecule:

Na: 22.99 g/mol

C: 12.01 g/mol

O: 16.00 g/mol

Molar mass of Na2CO3 = (2 x 22.99 g/mol) + 12.01 g/mol + (3 x 16.00 g/mol) = 105.99 g/mol

Now, we can use the molar mass to convert grams to moles:

1 grain = 0.06479891 grams

10 grains = 0.6479891 grams

0.6479891 g / 105.99 g/mol = 0.0061 moles

Therefore, 10 grains (0.6479891 grams) of Na2CO3 is equal to 0.0061 moles.

The molar mass (M) of a chemical product is described in chemistry as the ratio of mass to substance (measured in moles) of any sample of said molecule.  The molar mass of a material is a bulk characteristic, not a molecular trait. The molar mass is an average of many occurrences of the compound, which often differ in mass due to isotopes present.

Learn more about molar mass

brainly.com/question/22997914

#SPJ1

The mοlar mass οf MgCl₂ is 95.21 g/mοl.

It is calculated by summing the atοmic masses οf all the atοms in a mοlecule οr fοrmula unit οf a substance. Mοlar mass is an impοrtant cοncept in chemistry because it allοws us tο relate the mass οf a substance tο the number οf particles (atοms, mοlecules, οr iοns) in it.

The mοlar mass οf MgCl₂ (Magnesium chlοride) can be calculated by adding the atοmic masses οf magnesium (Mg) and chlοrine (Cl) atοms in the cοmpοund.

The atοmic mass οf magnesium (Mg) is 24.31 g/mοl, and the atοmic mass οf chlοrine (Cl) is 35.45 g/mοl (apprοx). MgCl₂ has οne magnesium atοm and twο chlοrine atοms, sο its mοlar mass can be calculated as:

Mοlar mass οf MgCl₂ = (1 x 24.31 g/mοl) + (2 x 35.45 g/mοl)

= 24.31 g/mοl + 70.90 g/mοl

= 95.21 g/mοl

Learn more about Molar Mass from given link

https://brainly.com/question/837939

#SPJ1

Answer:

Explanation:

Al(ClO2)3

We need 25.196 grams of acetic acid to prepare the solution.

To calculate the mass of acetic acid needed for the solution, we can use the following equation:

mass = moles x molecular weight

where moles = Molarity x Volume (in liters).

In this case, we know that the molarity of acetic acid (also known as ethanoic acid) is 0.839 M and the total volume of the solution is 0.500 L. Therefore, the number of moles of acetic acid needed is:

moles = 0.839 M x 0.500 L = 0.4195 moles

Next, we can use the molecular weight of acetic acid (60.05 g/mol) to calculate the mass of acetic acid needed:

mass = 0.4195 moles x 60.05 g/mol

= 25.196 g

To know more about acetic acid here

https://brainly.com/question/12924347

#SPJ4

Answer:

Explanation:

The balanced chemical equation for the reaction of hydrogen gas (H2) with oxygen gas (O2) to form water (H2O) is:

2H2 + O2 → 2H2O

According to the equation, 2 moles of H2 react with 1 mole of O2 to produce 2 moles of H2O. Therefore, to determine how many water molecules can be made from 7 moles of H2 and 8 moles of O2, we need to determine which reactant is limiting and calculate the amount of product that can be formed based on the limiting reactant.

To do this, we can calculate the moles of H2O that can be produced from each reactant and choose the smaller value as the limiting reactant.

From 7 moles of H2, we can produce:

(7 moles H2) x (2 moles H2O / 2 moles H2) = 7 moles H2O

From 8 moles of O2, we can produce:

(8 moles O2) x (2 moles H2O / 1 mole O2) = 16 moles H2O

Since we can only produce 7 moles of H2O from the H2, but we can produce 16 moles of H2O from the O2, the H2 is the limiting reactant. Therefore, the maximum amount of water molecules that can be produced is:

(7 moles H2) x (2 moles H2O / 2 moles H2) = 7 moles H2O

Finally, we can convert moles of H2O to the number of water molecules by multiplying the moles by Avogadro's number:

(7 moles H2O) x (6.02 x 10^23 molecules/mole) = 4.22 x 10^24 molecules of H2O

Therefore, from 7 moles of H2 and 8 moles of O2, we can make 4.22 x 10^24 water molecules.

According to the question the Cameron's percent yield is 63.0%.

Yield is the return on an investment over a specified period of time, usually expressed as a percentage. Yield is typically calculated by taking the income generated from an investment, such as dividends or interest, and dividing it by the total amount of capital invested. Yield can also refer to the rate of return on a bond or other fixed-income security, which is determined by the coupon rate, current market price, and time remaining until maturity.

Cameron's percent yield can be calculated by dividing the actual yield by the theoretical yield and multiplying by 100.
In this case, the calculation is (14.8/23.4)*100=63.2%.
Therefore, Cameron's percent yield is 63.2%. yield of 23.4 g of magnesium oxide, and then multiplying by 100.
Therefore, the equation is (14.8 g/23.4 g) x 100 = 63.0%.

To learn more about yield
https://brainly.com/question/25996347
#SPJ1

The error that has to be corrected is that minerals and rocks both have unique chemical compositions. The right answer is C.

Our bodies need minerals for appropriate growth and function; they can be found in food and on the planet. In contrast to rocks, minerals typically have distinct chemical compositions. Hence, the proper option is C. The chemical makeup of a rock mass is a key determinant in the creation of minerals inside the mass, as a specific mineral can only develop when the required elements are present. Quartz, feldspar, mica, amphibole, olivine, and calcite are examples of common minerals. A rock is an assemblage of one or more minerals, or a body of undifferentiated mineral materials.

Learn more about minerals here:

https://brainly.com/question/26065363

#SPJ4

Complete Question:

The following table was made to compare rocks and minerals. What information in the table needs to be corrected?

A. Rocks do have specific chemical compositions and minerals do not have specific chemical compositions.

B. Rocks include granite and marble, minerals include quartz and diamond.

C. Rocks do have specific chemical compositions and minerals do as well.

D. Rocks include quartz and diamond; minerals include granite and marble.

The mass of copper in the compound is 4.765 g because the complex's mass was 12.259 g.

The equation for the decomposition of the copper oxide compound is:

[tex]CuO \rightarrow Cu + O_2[/tex]

Given that 2.410 g of oxygen was produced, we can calculate the amount of copper present in the compound.

We know that 1 mole of oxygen has a mass of 32 g. So the mass of 2.410 g of oxygen is equal to ([tex]\frac{2.410 g }{ 32 g/mol}[/tex]) = 0.075 moles of oxygen.

Since the reaction is a 1:1 ratio, the same amount of moles of copper must have been present in the compound.

The mass of copper in the compound is equal to (0.075 moles x 63.546 g/mol) = 4.765 g.

Since the mass of the compound was 12.259 g, the mass of copper in the compound is 4.765 g.

learn more about copper Refer:brainly.com/question/29549873

#SPJ1

Answer:

To calculate the number of moles of HCl in the solution, we can use the formula:

moles = concentration x volume

where concentration is in units of moles per liter (M), and volume is in units of liters (L).

Converting the given volume to liters:

266 mL = 266/1000 L = 0.266 L

Substituting the given values into the formula:

moles = 0.260 M x 0.266 L

moles = 0.06896 mol

Therefore, the number of moles of HCl in the solution is 0.06896 mol (rounded to five significant figures).

One approach to stop wind erosion is for construction workers to moisten the ground before driving on it or digging.

Wind has the power to transfer little sand grains and other debris kilometres from their original site. It may also remove layers of sediment and dirt off the top of a landscape. By scraping against the surface or shattering into smaller pieces as they travel, the materials carried by the wind degrade the soil while they are deposited in new areas.

Impacts. Economic, health, and environmental costs associated with wind erosion include soil loss, high cleaning costs, absenteeism, transportation delays, sand-blasted crops, and retail losses.

To know more about wind erosion visit:-

https://brainly.com/question/11506364

#SPJ1

The elements when matched with their possible uses, gives us :

Oxygen is an essential element for combustion or burning. Sulfur is used in the production of sulfuric acid, which is a key ingredient in the manufacture of fertilizers, detergents, and other chemicals.

Selenium is used in the manufacture of photocopiers and other electronic devices. Tellurium is used in the production of special types of stainless steel that are highly resistant to corrosion. Polonium is a highly radioactive element that is used in some industrial applications, such as in the production of nuclear batteries.

Find out more on sulfur at https://brainly.com/question/2807773

#SPJ1

The calculation is correct with "1.55 × 10^24"  three significant figures.

Significant figures are important in scientific calculations because they indicate the precision and accuracy of a measurement or calculation. They help ensure that the final result reflects the level of precision of the original measurements.

The general rule for determining significant figures is that any digit that is not zero is significant, as well as any zero between significant digits. Zeros to the left of the first nonzero digit are not significant. When adding or subtracting, the result should be rounded to the same number of decimal places as the least precise measurement. When multiplying or dividing, the result should be rounded to the same number of significant figures as the measurement with the least significant figures.

Learn more about "significant figures" here:

https://brainly.com/question/29153641

#SPJ1

Answer:

Hydrogen, Helium, Lithium, Beryllium, Boron, Carbon, Nitrogen, Oxygen, Fluorine, Neon, Sodium, Magnesium, Aluminum, Silicon, Phosphorus, Sulphur, Chlorine, Argon, Potassium, Calcium

Let me know if this helps

Cold air should have been shows advancing toward warm air, causing the warm air to sink.

Molarity, also known as molar concentration, is a unit of measurement used to express the concentration of a solution. It is defined as the number of moles of a solute dissolved in one liter of solution. The unit of molarity is moles per liter (mol/L), also written as M. For example, a solution with a molarity of 0.1 M contains 0.1 moles of solute per liter of solution. Molarity is commonly used in chemistry and biochemistry to describe the concentration of solutions in experiments and industrial processes.

To know more about molarity,

https://brainly.com/question/8732513

#SPJ9

Complete question:

A student draws a model for a front that would bring heavy rainfall to an area. The diagram shows the model drawn by the student. The student made an error in the model. Which of these statements corrects the error in the model?