The ratio of moles of water to moles of dry sample can be found by dividing the percentage of water by 100.
The calculation of the number of water molecules in a crystal can be performed by analyzing the molar mass of the unhydrated crystal, which contains no water molecules. The ratio of moles of water to moles of dry sample can then be found by comparing the molar masses of the hydrated and unhydrated crystals.
The formula for calculating the number of water molecules in a crystal is as follows:
Percentage of water in crystal = (Molar mass of water / Molar mass of hydrate) * 100
The percentage of water in a crystal can then be used to determine the ratio of moles of water to moles of dry sample. To calculate the number of water molecules in an unknown sample, you must first determine the molar mass of the unhydrated sample. This can be done by dividing the mass of the sample by the number of moles in the sample. The mass of the sample is the sum of the masses of the dry sample and the water molecules. The molar mass of the water molecules is 18.015 g/mol.
To determine the mass of the water molecules, you must subtract the mass of the dry sample from the mass of the sample. The molar mass of the unhydrated sample can then be determined by dividing the mass of the dry sample by the number of moles in the sample. Once the molar mass of the unhydrated sample is known, the percentage of water in the sample can be calculated using the formula given above.
Finally, the ratio of moles of water to moles of dry sample can be found by dividing the percentage of water by 100.
Learn more about Molar mass
brainly.com/question/22997914
#SPJ11
acetic acid has a ka of 1.80x10-5. what is the ph of a buffer solution made from 0.150 m hc2h3o2 and 0.530 m c2h3o2 -?
Acetic acid has a ka of 1.80x10-5. The pH of a buffer solution made from 0.150 m hc2h3o2 and 0.530 m c2h3o2 is 4.76.
The pH of a buffer solution produced from 0.150 M HC2H3O2 and 0.530 M C2H3O2 is 4.76.
The following are the steps to solve the problem:
Acetic acid is a weak acid with the formula CH3COOH, which is also known as ethanoic acid.
HC2H3O2 is the molecular formula for this substance.
Acetic acid has a Ka of 1.8 x 10-5.
The ionization of acetic acid can be expressed as follows: CH3COOH + H2O ↔ H3O+ + CH3COO-
The ionization constant, Ka, is equal to the product of the concentration of H3O+ and CH3COO- ions divided by the concentration of CH3COOH.
Hence, Ka = ([H3O+] [CH3COO-])/[CH3COOH]
The Henderson-Hasselbalch equation is used to compute the pH of a buffer solution.
pH = pKa + log (base/acid), where pKa = -logKa.
In the equation, the base is C2H3O2-, and the acid is HC2H3O2.
Substituting the values in the equation, pH = -log1.8 x 10-5 + log(0.530/0.150) = 4.76.
Therefore, the pH of a buffer solution produced from 0.150 M HC2H3O2 and 0.530 M C2H3O2 is 4.76.
To know more about pH calculation, refer here:
https://brainly.com/question/1195974#
#SPJ11
what must be true for precipitation to occur? group of answer choices qsp > ksp qsp < ksp precipitation always occurs with sparingly soluble compounds none of these
For precipitation to occur, the value of Qsp (the ion product constant) should be greater than the solubility product constant (Ksp).
Precipitation is the conversion of a dissolved substance into a solid, which then settles out of a solution. Precipitation occurs when a liquid solution is cooled or heated, causing it to become super-saturated with one or more solutes. A solution's super-saturation means that it contains more of a solute than it can contain at equilibrium.
A tiny seed crystal of the solute is added to the solution to kick off the precipitation. The seed crystal provides a template for the rest of the solute to nucleate and form a solid. For precipitation to occur, the value of Qsp (the ion product constant) should be greater than the solubility product constant (Ksp). When Qsp is greater than Ksp, the solution is supersaturated and precipitates are formed. If Qsp is less than Ksp, the solution is unsaturated and no precipitation occurs.
Learn more about solution at:
https://brainly.com/question/16159788
#SPJ11
write a molecular equation for the gas evolution reaction that occurs when you mix aqueous hydrobromic acid and aqueous lithium sulfite.
The molecular equation for the gas evolution reaction between aqueous hydrobromic acid (HBr) and aqueous lithium sulfite (Li2SO3) is as follows: 2 HBr (aq) + [tex]Li_{2} So_{3}[/tex] (aq) → 2 LiBr (aq) + [tex]H_{2} So_{3}[/tex] (aq)
In this reaction, hydrobromic acid (HBr) reacts with lithium sulfite ([tex]Li_{2} So_{3}[/tex]) to form lithium bromide (LiBr) and sulfurous acid ([tex]H_{2} So_{3}[/tex]). The sulfurous acid is unstable and decomposes into water( [tex]H_{2o[/tex]) and sulfur dioxide gas ([tex]So_{2}[/tex]):
[tex]H_{2} So_{3}[/tex] (aq) → [tex]H_{2} 0[/tex]l) + [tex]So_{2}[/tex] (g)
The overall reaction is:
2 HBr (aq) + [tex]Li_{2} So_{3}[/tex] (aq) → 2 LiBr (aq) + [tex]H_{2} o[/tex] (l) + [tex]So_{2}[/tex] (g)
In this gas evolution reaction, the mixing of the two aqueous solutions results in the formation of a new compound, lithium bromide, which remains dissolved in the solution. The other product, sulfurous acid, decomposes into water and sulfur dioxide gas, which is released as bubbles in the solution. This release of gas is the characteristic feature of gas evolution reactions.
Know more about sulfurous acid here:
https://brainly.com/question/1084323
#SPJ11
an atomic transition produces a photon with a wavelength of 410 nm. what is the energy of this photon in ev?
The energy of a photon with a wavelength of 410 nm is equal to 3.03 eV.
To calculate this, you can use the formula E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength. Plugging in the values, you get E = (6.626x10⁻³⁴J·s)(3.0x10⁸m/s)/(410x10⁻⁹m) = 4.839 × 10-19 J = 3.03 eV.
An atomic transition produces a photon with a wavelength of 410 nm. The energy of this photon is 3.03 eV.
The following formula can be used to calculate the energy of a photon.
Energy = Planck's constant x (speed of light/wavelength).
Here, Planck's constant is (h) = 6.626 × 10⁻³⁴ J s. The speed of light is (c) = 3 × 10⁸m/s (in a vacuum). The wavelength of the photon is (λ) = 410 nm.
So, let's first convert the wavelength to meters (1 nm =10⁻⁹ m).
So, 410 nm = 410 × 10⁻⁹ m = 4.10 × [tex]10^{-7}[/tex]m. Now, we can calculate the energy of the photon using the formula.
Energy = h x (c/λ)
Energy = 6.626 × 10⁻³⁴ J s x (3 × 10⁸ m/s / 4.10 × [tex]10^{-7}[/tex] m)
Energy = 4.839 × [tex]10^{-19}[/tex] J (joules)
One electron volt is equal to 1.6 × [tex]10^{-19}[/tex]J.
So, we can convert the energy from joules to electron volts.
Energy (in eV) = Energy (in J) / (1.6 × [tex]10^{-19}[/tex]J/eV)
Energy (in eV) = 4.839 × [tex]10^{-19}[/tex]J / (1.6 × [tex]10^{-19}[/tex]J/eV)
Energy (in eV) = 3.03 eV
Therefore, the energy of the photon is 3.03 eV.
For more questions related to Planck's constant.
https://brainly.com/question/2289138
#SPJ11
how the temperature and vapor pressure are related knowing the enthalpy of vaporization at the boiling temperature
in a 55.0-g aqueous solution of methanol, ch4o, the mole fraction of methanol is 0.100. what is the mass of each component?
The mass of methanol in a 55.0-g aqueous solution of methanol, CH4O, is 5.53 g and the mass of water is 27.91 g. when the mole fraction of methanol is 0.100.
The mass of each component in a 55.0-g aqueous solution of methanol, CH4O, can be found by using the mole fraction of methanol (0.100).
First, calculate the total number of moles of the solution:
55.0 g x (1 mol/32.04 g) = 1.72 moles
Then, calculate the number of moles of methanol:
1.72 moles x (0.100 mole fraction) = 0.172 moles
Finally, calculate the mass of each component:
Methanol mass: 0.172 moles x (32.04 g/mol) = 5.53 g
Water mass: 1.72 moles - 0.172 moles = 1.55 moles x (18.02 g/mol) = 27.91 g
Therefore, the mass of methanol in a 55.0-g aqueous solution of methanol, CH4O, is 5.53 g and the mass of water is 27.91 g.
For more such questions on mass , Visit:
https://brainly.com/question/1838164
#SPJ11
Which would you expect to increase the rate of photosynthesis?
As you rise from low light intensity to higher light intensity, the rate of photosynthesis will increase because there is more light available to drive the reactions of photosynthesis.
one year, a herd of cattle released 8.44 metric tons of ch4 (methane) into the atmosphere. how many metric tons of carbon did this methane contain?
This herd of cattle released 8.44 metric tons of methane (CH4) into the atmosphere. Methane is composed of one atom of carbon and four atoms of hydrogen, so this 8.44 metric tons of methane contained (8,440 kg) x (12.01/16.05) g/kg = 6,309 kg (6.31 metric tons).
To answer the given question, we need to know the molecular formula of methane, which is CH4. The atomic mass of carbon is 12.01 g/mol and the atomic mass of hydrogen is 1.01 g/mol. Therefore, the molecular mass of methane is:
Molecular mass of CH4 = (1 x 12.01) + (4 x 1.01) = 16.05 g/mol
Now, we need to convert the amount of methane released into metric tons.
1 metric ton = 1,000 kg
8.44 metric tons = 8.44 x 1,000 = 8,440 kg
To convert the mass of methane into mass of carbon, we need to use the ratio of the molecular masses of carbon and methane.
1 mol of CH4 contains 1 mol of carbon
1 mol of CH4 has a mass of 16.05 g
1 mol of carbon has a mass of 12.01 g
Therefore,
16.05 g of CH4 contains 12.01 g of carbon
1 kg of CH4 contains (12.01/16.05) g of carbon
To convert the mass of methane into mass of carbon, we need to multiply it by the ratio of the molecular masses of carbon and methane.
Mass of carbon = (8,440 kg) x (12.01/16.05) g/kg
= 6,309 kg
Therefore, the herd of cattle released 6,309 kg (or 6.31 metric tons) of carbon into the atmosphere through the release of 8.44 metric tons of methane.
For more questions related to metric tons.
https://brainly.com/question/4062096
#SPJ11
a solution is made by dissolving 8424 mg of sodium chloride, nacl, in 0.1711 kg of water. what is the concentration in parts per billion?
The concentration of sodium chloride (NaCl) in the solution is 840,000 parts per billion (ppb).
To calculate this, divide the mass of sodium chloride (8424 mg) by the mass of water (0.1711 kg), then multiply the result by 1 billion (10^9).
To calculate the concentration of a solution, you must first determine the mass of the solute (NaCl in this case). The mass of the solute is given in the question as 8424 mg.
The mass of the solvent (water) is given as 0.1711 kg.
To calculate the concentration of the solution, divide the mass of the solute by the mass of the solvent, and then multiply the result by 1 billion (10^9).
In this example, 8424 mg divided by 0.1711 kg is equal to 49,336,297, which multiplied by 1 billion is equal to 49,336,297,000,000, or 840,000 parts per billion (ppb).
To know more about parts per billion click on below link:
https://brainly.com/question/13251096#
#SPJ11
an electrolyte solution . . . question 6 options: a) contains dissolved metals. b) contains non-polar molecules. c) is aqueous. d) contains ions. e) has free electrons in solution.
An electrolyte solution is one that contains ions. The correct option is d.
An electrolyte solution is one that can conduct an electric current. It contains charged particles or ions, which are what allow the solution to conduct an electric current. The following options can be eliminated as incorrect because they don't define electrolyte solution: a) contains dissolved metals b) contains non-polar molecules e) has free electrons in solution. Therefore, the correct option is (d) contains ions.Learn more about electrolyte solutions: https://brainly.com/question/14654936
#SPJ11
Calculate the number of moles o2 that would be produced if 1. 62 mol of H2O2 were to undergo decomposition
0.81 moles of O2 would be produced if 1.62 moles of H2O2 were to undergo decomposition
The balanced chemical equation for the decomposition of hydrogen peroxide (H2O2) is:
2 H2O2 → 2 H2O + O2
This means that for every 2 moles of hydrogen peroxide, 1 mole of oxygen gas is produced. So to calculate the number of moles of O2 produced when 1.62 moles of H2O2 decompose, we need to use a proportion:
2 mol H2O2 : 1 mol O2 = 1.62 mol H2O2 : x mol O2
where "x" is the number of moles of O2 produced.
To solve for "x", we can cross-multiply and simplify:
2 mol H2O2 * x mol O2 = 1 mol O2 * 1.62 mol H2O2
2x = 1.62
x = 0.81
Therefore, 0.81 moles of O2 would be produced if 1.62 moles of H2O2 were to undergo decomposition.
To know more about moles click here:
brainly.com/question/26416088
#SPJ4
when determining the energy effect of a chemical reaction the system is/are and the surroundings is/are
When determining the energy effect of a chemical reaction, the system is/are reactants and products and the surroundings are everything outside the system.
When determining the energy effect of a chemical reaction, the system and surroundings are involved. The system refers to the reactants and products involved in the chemical reaction, whereas the surroundings refer to everything else outside the system, including the temperature, pressure, and any other factors that can affect the reaction.
The energy effect of a chemical reaction can be determined by calculating the difference between the energy of the products and the energy of the reactants. This difference is known as the energy change or the enthalpy change of the reaction.
If the energy change is positive, it means that the reaction is endothermic, and energy is absorbed from the surroundings. This results in a decrease in the temperature of the surroundings.
On the other hand, if the energy change is negative, it means that the reaction is exothermic, and energy is released into the surroundings. This results in an increase in the temperature of the surroundings.
It is important to note that the energy effect of a chemical reaction can also be affected by external factors such as pressure, temperature, and the presence of a catalyst.
In conclusion, the system is the reactants, and the products and surroundings are factors like temperature and pressure, i.e., everything outside the system.
To know more about reactants, refer here:
https://brainly.com/question/13005466#
#SPJ11
2.37-l container is filled with 186 g argon. (a) if the pressure is 10.0 atm, what is the temperature? webassign will check your answer for the correct number of significant figures. k (b) if the temperature is 225 k, what is the pressure?
(a) If the pressure is 10.0 atm, the temperature is 62.0 K.
(b) if the temperature is 225 k, the pressure is 36.3 atm.
a) In order to calculate the temperature, we need to use the ideal gas law, PV = nRT, where P is the pressure, V is the volume of the container, n is the number of moles of argon, R is the ideal gas constant, and T is the temperature.
We can calculate the number of moles, n, by using the molar mass of argon, which is 39.948 g/mol.
We have n = 186 g / 39.948 g/mol = 4.656 mol.
So we can plug in our values and solve for T:
T = (10.0 atm)(2.37 L) / (4.666 mol)(0.08206 L·atm/mol·K) = 62.0 K.
b) To calculate the pressure, we can again use the ideal gas law, PV = nRT. We know the values of n, R, and T from the previous question.
Since the volume of the container is given, we can plug in these values to solve for P:
P = (4.666 mol)(0.08206 L·atm/mol·K)(225 K) / 2.37 L = 36.3 atm.
Learn more about ideal gas law here: https://brainly.com/question/27870704.
#SPJ11
elect any and all of these compounds that can undergo an addition and elimination reaction mechanism. OH OCH, A B C D E
Compounds that can undergo an addition and elimination reaction mechanism are OH and OCH3 since they are the ones that have a nucleophilic site or a leaving group.
The compounds that can undergo an addition and elimination reaction mechanism are listed below: OH - It is a hydroxyl group and is a nucleophile, which means it has an electron pair available for donation. OCH3 - Methoxy group, also known as OCH3, is a leaving group.
Addition reactions occur when two or more reactants combine to form a single product. They typically involve unsaturated compounds like alkenes or alkynes, which have double or triple carbon-carbon bonds. Elimination reactions, on the other hand, involve the removal of elements from a reactant to create a more unsaturated product, typically forming a double bond.
OH: This group represents an alcohol functional group. Alcohols can undergo elimination reactions, such as dehydration, to form alkenes.
OCH: This seems to be an incomplete functional group, as it is missing a carbon or hydrogen. If it's meant to represent an ether functional group (OCH3 or OCH2R, where R is an alkyl group), ethers generally do not undergo addition or elimination reactions.
In conclusion, without further information about compounds A, B, C, D, and E, we can only determine that a compound containing an OH functional group (an alcohol) can undergo elimination reactions, while the given OCH functional group does not undergo addition or elimination reactions.
To know more about nucleophilic site, refer here:
https://brainly.com/question/24297177#
#SPJ11
true or false: when two solutions containing ions as solutes are combined and a reaction occurs, it is always a single-replacement reaction.
The statement that "when two solutions containing ions as solutes are combined and a reaction occurs, it is always a single-replacement reaction" is False.
When two solutions containing ions as solutes are combined and a reaction occurs, it is not always a single-replacement reaction.
The type of reaction that will occur depends on the reactants and the conditions of the reaction.
For example, if two solutions containing different metal ions are mixed together, a double-replacement reaction may occur, in which two ionic compounds are formed.
Similarly, a precipitation reaction may occur if the combination of the two solutions produces an insoluble product.
In general, single-replacement reactions involve one element replacing another element in a compound, and occur when one of the reactants is an elemental solid, such as a metal.
To know more about solutes, refer here:
https://brainly.com/question/7932885#
#SPJ11
1. the pinakbet that your mother cooks is an example of a _
A. solution B. mixture C. solvent D. solute
2. which is NOT a characteristic of heterogeneous mixture?
A. the substances are evenly mixed
B. the substances are completely dissolved in water
C. the substances that are mixed cannot be identified
D. the substances can still be identified from the mixture
Answer:
1. Ans: B
Explanation: Pinakbet, which contains vegetables such as eggplants and kalabasa, are physically combined. Therefore, the pinakbet is an example of a mixture
2. Ans: A
Explanation: Heterogenous are different building blocks that are mixed UNEVENLY.
the freezing-point depression for a given aqueous solution is 0.34 k. the freezing-point depression constant for water is 1.86 k/m. calculate the molality of solutes in the solution.
the molality of solutes in the aqueous solution is 0.182 molal.
Freezing-point depression constant for water ([tex]K_f[/tex]) = 1.86 K/mFreezing-point depression of aqueous solution (Δ[tex]T_f[/tex]) = 0.34 KThe molality of solute in the solution = ?The formula to calculate molality is as follows;m = moles of solute/kilograms of solvent.
⇒m = (molality) = (Δ[tex]T_f[/tex]) / ([tex]K_f[/tex] × w2)
Here, Δ[tex]T_f[/tex] = Freezing-point depression[tex]K_f[/tex] = Freezing-point depression constant for waterw2 = Mass of solvent (Water) in KgWe have to calculate the molality of solutes in the solution by using the freezing-point depression constant and freezing-point depression of the aqueous solution.
Now, Substituting the given values, we get,
⇒ m = (Δ[tex]T_f[/tex]) / ([tex]K_f[/tex] × w2)
⇒ m = 0.34 / (1.86 × w2)
⇒ m = 0.182 molal
Therefore, the molality of solutes in the solution is 0.182 molal.
Learn more about molality: https://brainly.com/question/1370684
#SPJ11
what is the [hcoo-]/[hcooh] ratio in an acetate buffer at ph 4.50? (the pka for formic acid is 3.80.) [hcoo-]/[hcooh]
The ratio of [HCO₃⁻] to [HCO₂H] in an acetate buffer is 5.01.
The ratio of [HCO₃⁻] to [HCO₂H] (formic acid) in an acetate buffer at pH 4.50 is determined by the Henderson-Hasselbalch equation:
pH = pKa + log ([HCO₃⁻]/[HCO₂H]).
[HCO₃⁻]/[HCO₂H] = 10^(pH-pKa)
= 10^(4.50 - 3.80)
= 5.01
To further understand the buffering capacity of an acetate buffer, we must first understand the role of formic acid and bicarbonate in an acetate buffer.
Formic acid is an organic acid and bicarbonate is a salt of carbonic acid. Both of these species can form and break down as needed to maintain the pH of the buffer.
As the pH of the buffer is increased, the formic acid will break down, forming more bicarbonate.
On the other hand, as the pH of the buffer is decreased, more formic acid will form, resulting in fewer bicarbonate ions.
The buffering capacity of an acetate buffer is dependent on the relative concentrations of formic acid and bicarbonate ions, and these concentrations can vary depending on the pH of the buffer.
In summary, the ratio of [HCO₃⁻] to [HCO₂H] is found to be 5.01 in an acetate buffer at pH 4.50.
To know more about acetate buffer, refer here:
https://brainly.com/question/16970860#
#SPJ11
explain how you used your titration data to determine the volume of naoh used to reach the equivalence point of your titration. comment on the extent of agreement with the predicted volume you calculated above.g
To determine the volume of NaOH used to reach the equivalence point of the titration using the titration data, we need to find the point where the acid and base are neutralized.
At this point, the moles of acid and base are equal, and this is called the equivalence point.To find the volume of NaOH used at the equivalence point, we can use the following
Steps:1. Plot the titration data on a graph of pH versus volume of NaOH added.
Steps:2. Identify the point where the pH changes abruptly. This is the equivalence point.
Steps:3. Determine the volume of NaOH added at the equivalence point by reading the volume from the graph.
Steps:4. Compare the volume of NaOH used at the equivalence point of the titration with the predicted volume calculated above.The extent of agreement with the predicted volume can be assessed by calculating the percent error.
The percent error is calculated using the formula:
Percent error = [(experimental value - theoretical value) / theoretical value] x 100
If the percent error is small, then the agreement is good. If the percent error is large, then there is a significant difference between the predicted and experimental values.
Learn more about equivalence point of the titration here, https://brainly.com/question/31181892
#SPJ11
which isotope, when bombarded with nitrogen-15, yields four neutrons and the artificial isotope dubnium-260?
The isotope that yields four neutrons and the artificial isotope dubnium-260 when bombarded with nitrogen-15 is curium-244.
Curium-244 is a transuranic element of the actinide series. When bombarded with nitrogen-15, a nucleus of curium-244 splits into two smaller nuclei, releasing four neutrons in the process.
This process is called nuclear fission. The nucleus of nitrogen-15 is then combined with the two smaller nuclei to form dubnium-260, which is an artificially produced isotope.
Nuclear fission of curium-244 is a common process used in nuclear power plants. In nuclear power plants, uranium-235 is bombarded with neutrons, causing a chain reaction that produces energy and more neutrons.
The neutrons then bombard other uranium-235 nuclei, continuing the process. By bombarding curium-244 with nitrogen-15, a similar chain reaction is created that produces dubnium-260.
The production of dubnium-260 through nuclear fission of curium-244 can be used for various scientific and industrial purposes.
It can be used in the production of nuclear weapons, nuclear fuel, medical isotopes, and in other research activities.
In addition, it can be used as a catalyst for chemical reactions, to produce high energy radiation for sterilization, and for other industrial processes.
In conclusion, curium-244 yields four neutrons and the artificial isotope dubnium-260 when bombarded with nitrogen-15.
This process, known as nuclear fission, can be used in a variety of scientific and industrial applications.
to know more about isotope refer here
https://brainly.com/question/13063428#
#SPJ11
starting with a 1.00 l of a buffer that is 0.700 m hf and 0.553 m naf, calculate the ph after the addition of 0.100 mol naoh. ka (hf) 7.1 x 10-4
The pH after the addition of 0.100 mol NaOH to 1.00 L of a buffer that is 0.700 M HF and 0.553 M NaF. The pH is 7.031.
To calculate the pH after the addition of 0.100 mol NaOH to 1.00 L of a buffer that is 0.700 M HF and 0.553 M NaF, we can use the Henderson-Hasselbalch equation.
The Henderson-Hasselbalch equation is: pH = pKa + log ([A-]/[HA])
Where [A-] is the concentration of the anion (in this case, NaF) and [HA] is the concentration of the acid (in this case, HF).
pKa for HF is 7.1 x 10-4
Before we add the 0.100 mol NaOH, the pH of the buffer is:
pH = 7.1 x 10-4 + log ([0.553 M NaF]/[0.700 M HF])
= 7.1 x 10-4 + log(0.787)
= 7.1 x 10-4 + -0.103
= 6.997
Now, let's calculate the concentration of NaOH after we add 0.100 mol of it to the buffer. We know that 1 mole of NaOH will produce 1 mole of OH- ions, so the concentration of OH- ions is 0.100 M.
Since the buffer already contains HF and NaF, the total concentration of anions is 0.653 M.
We can now calculate the new pH using the Henderson-Hasselbalch equation:
pH = 7.1 x 10-4 + log([0.653 M anions]/[0.700 M HF])
= 7.1 x 10-4 + log(0.933)
= 7.1 x 10-4 + -0.069
= 7.031
Therefore, the pH of the buffer after the addition of 0.100 mol NaOH is 7.031.
For more such questions on Henderson-Hasselbalch equation , Visit:
https://brainly.com/question/13423434
#SPJ11
suppose 0.850 l of 0.400 m h2so4 is mixed with 0.800 l of 0.250 m koh . what concentration of sulfuric acid remains after neutralization?
The concentration of sulfuric acid that remains after neutralization is 0.056 M.
To find out what concentration of sulfuric acid remains after neutralization, you will need to use the balanced equation for the reaction:
H2SO4 + 2KOH → K2SO4 + 2H2O
First, you will need to determine the moles of each reactant in the solution.
Moles can be determined using the formula:
moles = concentration x volume
In this case:
moles of H2SO4 = 0.850 L x 0.400 M = 0.34 mol
moles of KOH = 0.800 L x 0.250 M = 0.2 mol
Since the reaction is a 1:2 ratio, you will need to determine which reactant is limiting the reaction.
To do this, compare the mole ratios of the reactants:
0.34 mol H2SO4 : 0.2 mol KOH = 1.7 : 1
Since the ratio of H2SO4 to KOH is greater than 1:2, KOH is the limiting reactant. Therefore, all of the KOH is used up in the reaction, leaving some H2SO4 unreacted.
To find the amount of H2SO4 remaining, you will need to use the mole ratio of H2SO4 to KOH.
Since 2 moles of KOH react with 1 mole of H2SO4, you can use the mole ratio:
0.2 mol KOH x (1 mol H2SO4 / 2 mol KOH) = 0.1 mol H2SO4 remaining
Finally, you can determine the concentration of the H2SO4 remaining:
concentration = moles / volume
concentration = 0.1 mol / (0.850 L + 0.800 L)
concentration = 0.056 M
Therefore, the concentration of sulfuric acid that remains after neutralization is 0.056 M.
For more such questions on concentration, click on:
https://brainly.com/question/28564792
#SPJ11
under standard conditions (298 k and 1 atm), which statement is true? refer to the constants for thermodynamic properties under standard conditions. a. diamond converts to graphite spontaneously b. graphite converts to diamond spontaneously c. none of the above
Under standard conditions (298 K and 1 atm), neither statement is true.
Diamond and graphite are both forms of carbon and are in a state of equilibrium under standard conditions. This means that neither diamond nor graphite will spontaneously convert to the other form.
Therefore, the correct answer is option (c): none of the above.
For more questions like thermodynamic visit the link below:
The thermodynamic equilibrium constant In a chemical equilibrium, K is the appropriate quotient of species activities. Under normal temperatures and pressures, an activity cannot be very many orders of magnitude more than 1.
The definition of thermodynamic properties is "system characteristics that can specify the state of the system." Certain constants, like R, are not attributes since they do not describe the state of a system.
Thermodynamics states that the conversion of diamond to graphite occurs spontaneously and is favourable. Yet, this reaction moves extremely slowly because kinetics, not thermodynamics, regulates it. As a result, diamond is thermodynamically unstable but kinetically stable.
https://brainly.com/question/29508731
#SPJ11
write the reaction that produces carbon dioxide in the separatory funnel in the workup of the reaction. g
One common reaction that produces carbon dioxide in organic chemistry workup is the reaction between sodium bicarbonate (NaHCO₃) and an acid.
When an acidic solution is added to a mixture containing sodium bicarbonate, carbon dioxide gas is produced as a result of the following reaction:
NaHCO₃ + H+ → Na+ + CO₂ + H₂O
The carbon dioxide gas will then bubble out of the mixture and can be collected in a separate container or released into the air.
In a separatory funnel workup, this reaction may be used to remove excess acid from an organic reaction mixture. The mixture is first extracted with a suitable organic solvent, and then an aqueous solution of sodium bicarbonate is added to the separatory funnel. The acidic components in the mixture will react with the sodium bicarbonate to produce carbon dioxide, which will bubble out of the mixture and can be released through the stopcock
To learn more about reaction refer to:
brainly.com/question/29039149
#SPJ4
the pressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the new volume of the balloon (in ml) at constant temperature?
Answer:
pressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the newpressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the new volume of the balloon (in ml) at constant temperature
the electronic configuration of O2−is2s22p6.
Yes, it is true that the electronic configuration of O2- is 1s2 2s2 2p6.
What is meant by electronic configuration?Arrangement of electrons in orbitals around atomic nucleus is called electronic configuration and describes how electrons are distributed in its atomic orbitals.
When oxygen atom gains two electrons to form an O2- ion, the two electrons occupy the lowest energy level available, which is the 2s orbital. Therefore, the electronic configuration of O2- is the same as that of neon (1s2 2s2 2p6), which has a full outermost shell of electrons. This noble gas configuration makes the O2- ion stable and less likely to react with other elements.
To know more about electronic configuration, refer
https://brainly.com/question/26084288
#SPJ1
Answer with the Matching-match the letter with the correct item
Double replacement or metathesis reaction involves the exchange of ions between two compounds.
What are the types of reaction?Combination or synthesis reaction is a type of reaction that involves two or more reactants combining to form a single product. The general format is A + B → AB.
Decomposition reaction involves a single reactant breaking down into two or more products. The general format is AB → A + B.
The matching of the letters are;
1 - C
2 - H
3 - E
4 - F
5 - A
6 - B
7 - I
8 - J
9 - G
10 - D
1) False
2) False
3) True
4) False
5) True
6) True
7) True
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
how can you tell by looking at a graph which reaction (forward or reverse) is favored (i.e. faster when the concentrations of reactants and products are equal)?
The forward reaction is favored when the graph shows that the reactant concentration is higher than the product concentration.
To determine which reaction is favored, examine the graph and look at the concentrations of reactants and products at equilibrium. If the reactant concentration is higher, the forward reaction is favored. Conversely, if the product concentration is higher, the reverse reaction is favored.
A graph can help you visualize the reactants and products of a reaction at equilibrium. The y-axis of the graph typically indicates the concentration of the reactants or products, and the x-axis of the graph indicates the reaction rate.
At equilibrium, the reaction rate is 0, meaning that the reactants and products are neither increasing nor decreasing in concentration. By looking at the concentrations of the reactants and products at equilibrium on the graph, you can determine which reaction is favored.
If the reactant concentration is higher than the product concentration, then the forward reaction is favored. This means that the forward reaction occurs more quickly than the reverse reaction when the concentrations of the reactants and products are equal.
Conversely, if the product concentration is higher than the reactant concentration, then the reverse reaction is favored.
To know more about forward reaction click on below link:
https://brainly.com/question/8592296#
#SPJ11
Suppose that an ion has an absorption line at a rest wavelength of 1000.0 nm. this line is shifted to 1000.1 nm in the spectrum of a star. how fast is the star moving? hint: the doppler shift formula is (vrad/c)
The star is moving by a velocity of 3 *10^{5}.
The formula for the Doppler shift is given by
f2/f1 = (c-v)/c,
where c is the speed of light, v is the velocity of the moving object, and f1 and f2 are the emitted and received frequencies of light, respectively.
The Doppler effect occurs when the light source and the observer are moving relative to one another, giving the impression that the light's frequency has changed.
The Doppler effect alters the frequency of light from a moving source, shifting it either to the red or blue. This resembles (but does not necessarily mimic) the behavior of other types of waves, such as sound waves.
The star is moving away from the observer because the wavelength of the spectral line has shifted to a longer wavelength.
doppler shift
Thus, the velocity is given by the formula
:v/c = (Δλ/λ)
where is the rest wavelength and is the change in wavelength.
v/c = (Δλ/λ)v/c = (1000.1 - 1000.0)/1000.0v/c = 0.0001/1000.
0v/c = 1e-7v = (1e-7) × c = 300 × 1e-7 = 3e-5
The star is moving away from the observer at a velocity of[tex]3 *10^{5}[/tex]m/s.
To know more about the doppler effect https://brainly.com/question/15318474
#SPJ11
a 24.6 ml sample of 0.389 m ethylamine, c2h5nh2, is titrated with 0.325 m hydroiodic acid. at the equivalence point, the ph is .
At the equivalence point of a titration between 24.6 mL of 0.389 M ethylamine, C2H5NH2, and 0.325 M hydroiodic acid, the pH is 0.
At the equivalence point of a titration between 24.6 mL of 0.389 M ethylamine, C2H5NH2, and 0.325 M hydroiodic acid, the pH is 0. The equation for the reaction is:
C2H5NH2 + HI → C2H5NH3+ + I-
The number of moles of hydroiodic acid, HI, needed to reach the equivalence point is equal to the number of moles of ethylamine, C2H5NH2. To calculate this, use the following equation:
Moles of HI = Moles of C2H5NH2
Volume of C2H5NH2 x Molarity of C2H5NH2 = Volume of HI x Molarity of HI
24.6 mL x 0.389 M = Volume of HI x 0.325 M
Volume of HI = 24.6 mL x 0.389 M / 0.325 M
Volume of HI = 30.53 mL
At the equivalence point, the pH of the solution is 0.
Learn more about titration here:
https://brainly.com/question/2728613#
#SPJ11