Based on the information, it is 3 miles from the school to the grocery store.
How to calculate tie distanceLooking at the map, we can see that the school is located at (-4, 5) and the grocery store is located at (-5, 4). The horizontal distance between them is 1 unit, and the vertical distance is also 1 unit.
Therefore, the total distance between the school and the grocery store is:
Distance = (horizontal distance) x (distance per unit) + (vertical distance) x (distance per unit)
Distance = 1 x 1.5 miles + 1 x 1.5 miles
Distance = 3 miles
Learn more about Distance on
https://brainly.com/question/26550516
#SPJ1
for the rhombus below, find the measures of 21, 22, 23, and 24.
2
42°
m21 = 0°
m2 =
m23
m 24
=
11
=
口。
The angle of the rhombus is given as 54 degrees (alternate angles)
How to find angles measure on a rhombusA rhombus, a four-sided polygon dotted with sides of the corresponding length, has adjacent angles with equal measure and all four edges culminating in 360 degrees.
If one is seeking to identify the measurements of each angle within a rhombus, they may do so by employing the following formula:
angle measurement = (180 - diagonal angle)/2
To begin, single out one of the diagonal angles; then, take 180 minus that angel and subsequently halve it--this is the measure of each neighboring angle.
Repetition of this procedure on the opposing diagonal angle should enable you to uncover all four side lengths of the rhombus.
Read more about rhombus here:
https://brainly.com/question/20627264
#SPJ1
The value of angle 1, 2, 3, and 4 is 42⁰, 48⁰, 42⁰ and 42⁰ respectively.
What is the value of angle 1, 2, 3, and 4?The value of angle 1, 2, 3, and 4 is calculated as follows;
angle 3 = angle 4 (alternate angles are equal)
angle 3 = 42⁰
let the angle adjacent to 3 = y
y = 90 - 42⁰
y = 48⁰
angle 4 + adjacent angle = 180 - (42 + 48)
angle 4 + angle 2 = 180 - 90
angle 4 + angle 2 = 90
angle 4 = 42⁰ (vertical opposite angles)
angle 2 = 90 - 42⁰
angle 2 = 48⁰
angle 1 = angle 4 = 42⁰ (alternate angles).
Learn more about alternate angles here: https://brainly.com/question/24839702
#SPJ1
We want to know if there is a difference between the size of the shoe between mother and daughter for which a sample of 10 pairs of mother and daughter is taken and a hypothesis test is done. If the significance is α = 0.10,
(a) what is the value of the positive critical point? Answer
b) what is the value of the negative critical point? Answer
The negative critical point is approximately -1.812.
The critical values for a two-tailed hypothesis test with a significance level of α = 0.10 and 10 degrees of freedom (sample size - 1) can be found using a t-distribution table or a statistical software.
a) The positive critical point can be found by looking up the t-distribution table or using a statistical software to find the t-value that corresponds to a cumulative probability of 0.95 with 10 degrees of freedom. The value is approximately 1.812.
b) The negative critical point can be found by finding the t-value that corresponds to a cumulative probability of 0.05 with 10 degrees of freedom. Since the t-distribution is symmetric, this value is the negative of the positive critical point. Therefore, the negative critical point is approximately -1.812.
To learn more about probability visit:
https://brainly.com/question/15124899
#SPJ11
30 points if someone gets it right
You roll a cube what is the probability of rolling a number greater than 2? write you answer as a fractiom
A person places $8430 in an investment account earning an annual rate of 3. 8%,
compounded continuously. Using the formula V = Pent, where V is the value of the
account in t years, P is the principal initially invested, e is the base of a natural
logarithm, and r is the rate of interest, determine the amount of money, to the
nearest cent, in the account after 16 years.
The amount of money in the account after 16 years is approximately $17,526.64.
What is compound interest?Using the formula for continuous compounding, we have:
V = Pe[tex]^(rt)[/tex]
where V is the value of the account after t years, P is the principal initially invested, e is the base of the natural logarithm, r is the annual interest rate, and t is the time in years.
Substituting the given values, we get:
V = 8430e[tex]^(0.038*16)[/tex]
Simplifying this expression, we have:
V = 8430[tex]e^0.608[/tex]
Using a calculator, we get:
V ≈ $17,526.64
Therefore, the amount of money in the account after 16 years is approximately $17,526.64.
Learn more about compound interest here: brainly.com/question/22621039
#SPJ4
a simple random sample of 5 observations from a population containing 400 elements was taken, and the following values were obtained. 12 18 19 20 21 a point estimate of the population mean is
A simple random sampling of 5 observations from a population containing 400 elements was taken. Then, the point estimate of the population means is 18.
You have a simple random sample of 5 observations from a population containing 400 elements, and the observed values are 12, 18, 19, 20, and 21.
To calculate the point estimate of the population mean, we simply take the average of the sample values.
Point estimate of population mean = (12 + 18 + 19 + 20 + 21)/5 = 18
Therefore, the point estimate of the population means is 18.
To clarify the terms used in the question, a "random sample" is a sample that is selected randomly from the population, meaning that every element in the population has an equal chance of being included in the sample. In this case, a simple random sample of 5 observations was taken. "Elements" refers to the individual units or objects within the population that is being studied. In this case, there were 400 elements in the population.
Learn more about Random Sampling:
brainly.com/question/29357010
#SPJ11
Let
�
(
�
)
=
2
�
2
−
5
�
+
5
f(x)=2x
2
−5x+5 and
�
(
�
)
=
�
2
+
4
g(x)=x
2
+4. Find the following.
a)
(
�
+
�
)
(
�
)
(f+g)(x)
(
�
+
�
)
(
�
)
=
(f+g)(x)=
Preview
b)
(
�
−
�
)
(
�
)
(f−g)(x)
(
�
−
�
)
(
�
)
=
(f−g)(x)=
Preview
c)
(
�
⋅
�
)
(
�
)
(f⋅g)(x)
As per the functions given, (f+g)(x) = f(x) + g(x) adding the two functions (f+g)(x) = 3x^2 - 5x + 9.
Adding the two functions, we get:
(f+g)(x) = (2x^2 - 5x + 5) + (x^2 + 4)
(f+g)(x) = 3x^2 - 5x + 9
Therefore, (f+g)(x) = 3x^2 - 5x + 9.
b) (f-g)(x) = f(x) - g(x)
Subtracting the two functions, we get:
(f-g)(x) = (2x^2 - 5x + 5) - (x^2 + 4)
(f-g)(x) = x^2 - 5x + 1
Therefore, (f-g)(x) = x^2 - 5x + 1.
c) (f x g)(x) = f(x) * g(x)
Multiplying the two functions, we get:
(f x g)(x) = (2x^2 - 5x + 5) * (x^2 + 4)
(f x g)(x) = 2x^4 - 5x^3 + 5x^2 + 8x^2 - 20x + 20
(f x g)(x) = 2x^4 - 5x^3 + 13x^2 - 20x + 20
Therefore, (f x g)(x) = 2x^4 - 5x^3 + 13x^2 - 20x + 20.
For more details regarding functions, visit:
https://brainly.com/question/12431044
#SPJ1
Please Answer fast !
The following points represent a relation where x represents the independent variable and y represents the dependent variable. three fourths comma negative 2, 1 comma 5, negative 2 comma negative 7, three fourths comma negative one half, and 6 comma 6 Does the relation represent a function? Explain. Yes, because for each output there is exactly one input Yes, because for each input there is exactly one output No, because for each output there is not exactly one input No, because for each input there is not exactly one output
The given set of ordered pairs represents a function because each output has exactly one corresponding input. So, the correct answer is A) Yes, because for each output there is exactly one input.
A relation between two variables is a set of ordered pairs, where the first element in each pair corresponds to the input or independent variable (usually denoted by x), and the second element corresponds to the output or dependent variable (usually denoted by y).
In the given set of ordered pairs, each output has exactly one corresponding input, and therefore the relation satisfies the definition of a function. For example, the input of 3/4 is associated with only one output of -2, and the output of -7 is associated with only one input of -2. Hence, the relation represents a function.
So, the correct answer is A).
To know more about ordered pairs:
https://brainly.com/question/30805001
#SPJ1
Lisa is on a run of 18 miles. She has 3 hours to complete her run. How many miles does she need to run each hour to complete the run?
A) 7
B) 6
C) 8
D) 5
Answer:
B) 6
Step-by-step explanation:
Firstly, we need to know what the question is asking for.
"How many miles does she need to run each hour to complete the run" is asking for a speed in miles per hour.
miles / hour = speed in mph
18 miles / 3 hours = 18/3 mph
18/3 simplifies to 6
Lisa needs to run 6 mph
Suppose that the time until failure of a certain mechanical device has an exponential distribution with a mean lifetime of 20 months. If 5 independent devices are observed, what is the chance that the first failure will occur w months?
To answer this question, we'll use the exponential distribution and the concept of the probability density function (pdf). Let X be the time until failure of a single device, with a mean lifetime of 20 months. The exponential distribution has the following pdf:
f(x) = (1/μ) * e^(-x/μ),
where μ is the mean lifetime (20 months in this case).
Now, let's find the probability that the first failure occurs at w months among the 5 independent devices. For this, we need to calculate the probability that none of the other 4 devices fail before w months and that the first device fails at w months.
The probability that a single device does not fail before w months is given by the complementary cumulative distribution function (ccdf) of the exponential distribution:
P(X > w) = e^(-w/μ).
Since the devices are independent, the probability that all 4 devices do not fail before w months is:
P(All 4 devices survive > w) = (e^(-w/μ))^4.
Now, the probability that the first device fails at w months is given by the pdf of the exponential distribution:
P(X = w) = (1/μ) * e^(-w/μ).
Finally, we multiply the two probabilities to find the chance that the first failure occurs at w months:
P(First failure at w) = P(All 4 devices survive > w) * P(X = w)
= (e^(-w/μ))^4 * (1/μ) * e^(-w/μ)
= (1/20) * e^(-5w/20).
Thus, the chance that the first failure will occur at w months is given by the expression (1/20) * e^(-5w/20).
To learn more about Exponential distribution - brainly.com/question/22692312
#SPJ11
A _________________________ involves testing all possible combinations of the factors in an experiment at a number of levels.
Single Factor Design F
ractional Factorial Design
Full Factorial Design
None of the above
______________________ are used for screening experiments to identify critical factors.
Full factorial designs
Fractional factorial designs
Single factor designs
None of the above
The answer to the first question is Full Factorial Design, and the answer to the second question is Fractional Factorial Designs.
Full Factorial Design involves testing all possible combinations of the factors in an experiment at a number of levels.
Fractional Factorial Designs are used for screening experiments to identify critical factors. These designs are a subset of the full factorial design, and they only test a fraction of the possible combinations of the factors in an experiment. This allows for a more efficient use of resources when conducting experiments.
Therefore, the answer to the first question is Full Factorial Design, and the answer to the second question is Fractional Factorial Designs.
To know more about "Fraction" refer here:
https://brainly.com/question/8473591#
#SPJ11
Given the integer variables x and y, write a fragment of code that assigns the larger of x and y to another integer variable maxmax = x;if (y > max) max = y;max = yif (y > max) max = y;max = x;if (x > max) max = x
At the end of the code, max contains the value of the larger of x and y.
The correct fragment of code that assigns the larger of x and y to another integer variable max is:int max;
if (x > y) {
max = x;
} else {
max = y;
}
In this code fragment, we first declare the integer variable max without assigning it a value. We then use an if statement to compare x and y. If x is greater than y, we assign x to max, otherwise, we assign y to max. At the end of the code, max contains the value of the larger of x and y.
To learn more about integer variable visit:
https://brainly.com/question/27855584
#SPJ11
) find the matrix a of the linear transformation t(f(t))=f(2) from p2 to p2 with respect to the standard basis for p2, {1,t,t2}
The sample mean of the population is 3/4 and the variance is 3/80. Using the central limit theorem, P( > 0.8) can be simplified as 0.003.
The mean of the population can be computed as follows:
µ = ∫x f(x) dx from 0 to 1
= ∫x (3x²) dx from 0 to 1
= 3/4
The variance of the population can be computed as follows:
σ² = ∫(x-µ)² f(x) dx from 0 to 1
= ∫(x-(3/4))² (3x²) dx from 0 to 1
= 3/80
By the Central Limit Theorem, as the sample size n = 80 is large, the distribution of the sample mean can be approximated by a normal distribution with mean µ and variance σ²/n.
Therefore, P( > 0.8) can be approximated by P(Z >0.8- 0.75)/(sqrt(3/80)/(sqrt(80))), where Z is a standard normal random variable.
Simplifying, we get P( > 0.8) ≈ P(Z > 2.73) ≈ 0.003.
To know more about sample mean:
brainly.com/question/31101410
Which of the following are complete eigenvalues for the indicated matrix? What is the (a) 3, († 2), 0 0 1 1 1 1 -1 0 2 -1 0 0 -4 -1 4 -4 0 3 1 0 0 1 -1 1 10 -1 1 0 1 1 0 0 1 - 1 -1 -1 1 b) 2 1 2 0 2 0 0 -1 1 1 (c) 1, 1 1 (d) 1, (e) -1, 1 0 dimension of the associated eigenspace?
There are two free variables, so the dimension of the eigenspace is 2. So the dimensions of the associated eigenspaces are 2 for all three eigenspace.
To determine which of the given values are complete eigenvalues, we need to find the characteristic polynomial of the matrix. This is done by finding the determinant of (A - λI), where A is the matrix and λ is the eigenvalue:
| 3-λ 2 0 -4 1 |
| 0 1-λ 3 1 0 |
| 1 -1 -1-λ 4 0 |
| -1 0 2 -4-λ 0 |
| 1 1 -1 0 1-λ|
Expanding along the first row, we get:
(3-λ) | 1-λ 3 1 0 |
|-1 2-λ 4 0 |
|1 -1 -4-λ 0 |
|1 -1 0 1-λ |
= (3-λ)[(2-λ)(1-λ)(1-λ) + 4(-1)(1-λ) + 0(4-λ)] - (-1)[(1-λ)(1-λ)(4-λ) + 0(1-λ) + 0(-1)] + (1)[(1-λ)(4-λ)(0) - (2-λ)(1-λ)(-1)] - (1)[(1-λ)(-1)(-1) - (2-λ)(-1)(0)]
= (3-λ)[λ^3 - 6λ^2 + 9λ - 4] + (λ-1)[4λ^2 - 10λ + 6] + (λ-1)(λ-4) - (λ-2)
= λ^5 - 11λ^4 + 44λ^3 - 78λ^2 + 60λ - 16
Now we can check which of the given values satisfy the characteristic polynomial:
(a) 3, († 2), 0, 1
Substituting each value into the polynomial, we get:
3^5 - 11(3^4) + 44(3^3) - 78(3^2) + 60(3) - 16 = 0
2^5 - 11(2^4) + 44(2^3) - 78(2^2) + 60(2) - 16 ≠ 0
0^5 - 11(0^4) + 44(0^3) - 78(0^2) + 60(0) - 16 ≠ 0
1^5 - 11(1^4) + 44(1^3) - 78(1^2) + 60(1) - 16 = 0
So the complete eigenvalues for this matrix are 3, 0, 1.
To find the dimension of the associated eigenspace for each eigenvalue, we need to find the nullspace of (A - λI). For each eigenvalue, we can do this by row reducing the matrix (A - λI) and finding the number of free variables. The dimension of the associated eigenspace is then equal to the number of free variables.
(a) λ = 3:
| 0 -1 1 1 -1 |
| 0 -2 4 0 1 |
| 1 -1 -4 2 1 |
|-1 0 2 -7 1 |
| 1 1 -1 0 -2 |
RREF:
| 1 0 -2 0 0 |
| 0 1 -2 0 0 |
| 0 0 0 1 0 |
| 0 0 0 0 1 |
| 0 0 0 0 0 |
There are two free variables, so the dimension of the eigenspace is 2.
(a) λ = 0:
| 3 2 0 -4 1 |
| 0 1 3 1 0 |
| 1 -1 -1 4 0 |
|-1 0 2 -4 0 |
| 1 1 -1 0 1 |
RREF:
| 1 0 -2 0 0 |
| 0 1 -2 0 0 |
| 0 0 0 1 0 |
| 0 0 0 0 0 |
| 0 0 0 0 0 |
There are two free variables, so the dimension of the eigenspace is 2.
(a) λ = 1:
| 2 2 0 -4 1 |
| 0 0 3 1 0 |
| 1 -1 -2 4 0 |
|-1 0 2 -5 1 |
| 1 1 -1 0 0 |
RREF:
| 1 0 -1 0 0 |
| 0 1 -1 0 0 |
| 0 0 0 1 -1 |
| 0 0 0 0 0 |
| 0 0 0 0 0 |
There are two free variables, so the dimension of the eigenspace is 2.
So, the dimensions of the associated eigenspaces are 2 for all three eigenvalues.
Learn more about eigenspace here:
brainly.com/question/30715889
#SPJ1
suppose that 10^6 people arrive at a service station at times that are independent random variable, each of which is uniformly distributed over (0,10^6). Let N denote the number that arrive in the first hour. Find an approximation for P{N=i}.
Since the arrival times are independent and uniformly distributed, the probability that a single person arrives in the first hour is 1/10^6. Therefore, the number of people N that arrive in the first hour follows a binomial distribution with parameters n=10^6 and p=1/10^6.
The probability that exactly i people arrive in the first hour is then given by the binomial probability mass function:
P{N=i} = (10^6 choose i) * (1/10^6)^i * (1 - 1/10^6)^(10^6 - i)
Using the normal approximation to the binomial distribution, we can approximate this probability as:
P{N=i} ≈ φ((i+0.5 - np) / sqrt(np(1-p)))
where φ is the standard normal probability density function. Plugging in the values of n=10^6 and p=1/10^6, we get:
P{N=i} ≈ φ((i+0.5 - 1) / sqrt(1*0.999999)) = φ(i - 0.5)
Therefore, an approximation for P{N=i} is given by the standard normal density function evaluated at i-0.5.
Learn more about binomial distribution:
https://brainly.com/question/31197941
#SPJ11
Select the correct answer.
The postal service charges $2 to ship packages up to 5 ounces in weight, and $0. 20 for each additional ounce up to 20 ounces. After that they
charge 50. 15 for each additional ounce.
What is the domain of this relation?
The domain of this relation is the set of all non-negative real numbers that can be expressed as: A weight from 0 to 5 ounces A weight from 5 to 20 ounces that is a multiple of 0.2 ounces A weight greater than 20 ounces is a multiple of 0.15 ounces.
The domain of this relation is the set of all possible weights of packages that can be shipped using the postal service.
Since the postal service charges $2 for packages up to 5 ounces, the domain includes all weights from 0 to 5 ounces. For packages weighing between 5 and 20 ounces, the domain includes all weights from 5 to 20 ounces, with each weight being a multiple of 0.2 ounces.
For packages weighing more than 20 ounces, the domain includes all weights greater than 20 ounces, with each weight being a multiple of 0.15 ounces.
The domain does not include negative numbers or numbers that are not expressible using the above criteria.
Learn more about domain here:
https://brainly.com/question/28135761
#SPJ4
2. How many ways can you choose 5 players from 14?
3. How many ways can you line up 7 books on a shelf?
4. A test of 10 different types of candy are being tested. If a person is given 6 of the candies to taste how many combinations are possible?
solve using permutation
The number of ways of arrangement is 726, 485, 760 ways, 5040 ways, 210 ways resdpectively
What is permutation?Remember that Permutation is a mathematical technique that determines the number of possible arrangements in a set when the order of the arrangements matters.
How many ways can you choose 5 players from 14
= [tex]14^{} Px_{5}[/tex]
14!/(14-5)!
(14*13*12*11*10*9*8*7*6*5*4*3*2*1)/9*8*7*6*5*4*3*2*1
= 726, 485, 760 ways
3. How many ways can you line up 7 books on a shelf?
= 7!
= 5040 ways
4. 10!/(10-6)!6!
10*9*8*7*6*5*4*3*2*1/6*5*4*3*2*1*4*3*2*1
= 5040/24
= 210 ways
Learn more about permutations on https://brainly.com/question/30649574
#SPJ1
Determine the intervals on which the function is concave up or down and find the value at which the inflection point occurs. Y = 8x' – 3x+ (Express intervals in interval notation. Use symbols and fractions when needed)
The value of the inflection point is 1/10, and the intervals on which the function is concave up or down are (0, 1/10) and (1/10, ∞).
Taking the second derivative of y(x), we get:
y''(x) = 240x³ - 24x²
Setting y''(x) equal to zero and solving for x, we get:
x = 0 or x = 1/10
These critical points divide the real line into three intervals:
(-∞, 0), (0, 1/10), and (1/10, ∞)
We evaluate the sign of y''(x) on each of these intervals to determine where the function is concave up or down:
For x < 0: y''(x) < 0, so y(x) is concave down.
For 0 < x < 1/10: y''(x) > 0, so y(x) is concave up.
For x > 1/10: y''(x) > 0, so y(x) is concave up.
Therefore, the function is concave down on the interval (-∞, 0) and concave up on the intervals (0, 1/10) and (1/10, ∞).
To find the inflection point, we set y''(x) equal to zero and solve for x:
240x³ - 24x² = 0
Factor out 24x²:
24x²(10x - 1) = 0
So either x = 0 or x = 1/10.
Since the second derivative changes sign at x = 1/10, this is an inflection point.
Therefore, the inflection point occurs at x = 1/10.
Learn more about the inflection point at
https://brainly.com/question/30000479
#SPJ4
The question is -
Determine the intervals on which the function is concave up or down and find the value at which the inflection point occurs.
Y = 8x^5 - 3x^4
(Express intervals in interval notation. Use symbols and fractions when needed)
point of influence at x = __________
interval on which function is concave up = ____________
interval on which function is concave down = ___________
156, 153, 150,.
Find the 30th term.
The 30th term of the given sequence 156, 153, 150, ... is 69.
The given sequence is as follows: 156, 153, 150,...
To locate the 30th term in this sequence, we must first determine the series's pattern. We can observe that each term is dropping by three, resulting in a common difference of -3. As a result, the nth term of this series can be written as a = a1 + (n - 1)d, where a1 represents the first term, d represents the common difference, and n represents the nth term.
We can use the formula for the nth term of an arithmetic sequence:
an = a1 + (n-1)d
In this case, we have:
a1 = 156 (the first term)
d = -3 (the common difference)
n = 30 (the number of terms)
Using the formula, we can calculate the 30th term:
a30 = 156 + (30-1)(-3)
a30 = 156 + (-87)
a30 = 69
learn more about sequence here:
https://brainly.com/question/30262438
#SPJ4
Mr. Pham assigns a quiz that will have at most 15 questions. Write an inequality that shows how many questions, q, will be on Mr. Pham’s quiz
The inequality that shows how many questions, q, will be on Mr. Pham's quiz is: 0 ≤ q ≤ 15
What is inequalities?
In mathematics, an inequality is a mathematical statement that indicates that two expressions are not equal. It is a statement that compares two values, usually using one of the following symbols: "<" (less than), ">" (greater than), "≤" (less than or equal to), or "≥" (greater than or equal to).
This inequality states that the number of questions, q, must be greater than or equal to zero (since there cannot be a negative number of questions), but less than or equal to 15 (since Mr. Pham's quiz will have at most 15 questions).
Therefore, the inequality that shows how many questions, q, will be on Mr. Pham's quiz is: 0 ≤ q ≤ 15
To learn more about inequalities from the given link:
https://brainly.com/question/30231190
#SPJ1
carmen went on a trip of 120 miles, traveling at an average of x miles per hour. several days later she returned over the same route at a rate that was 5 miles per hour faster than her previous rate. if the time for the return trip was one-third of an hour less than the time for the outgoing trip, which equation can be used to find the value of x?
The equation that can be used to find the value of x is 120 = (x + 5) × (120/x - 1/3).
Carmen's first trip was 120 miles, and she traveled at an average of x miles per hour. We can use the formula:
distance = rate × time, which can be written as:
120 miles = x miles/hour × time
where, time is the time for outgoing.
For the return trip, Carmen traveled at a rate that was 5 miles per hour faster, so her speed was (x + 5) miles/hour. The time for the return trip was one-third of an hour less than the time for the outgoing trip, so we can represent the return trip time as (time - 1/3) hours. Using the distance formula again for the return trip:
120 miles = (x + 5) miles/hour × (time - 1/3) hours
Now, let's express both times in terms of x. From the first equation, we can find the time for the outgoing trip as:
time = 120 miles / x miles/hour
Substitute this expression for time in the return trip equation:
120 miles = (x + 5) miles/hour × (120/x - 1/3) hours
Now you have an equation that can be used to find the value of x:
120 = (x + 5) × (120/x - 1/3)
Know more about equation here:
https://brainly.com/question/29174899
#SPJ11
sheri walked 15\16 of a mile to school and then 7\8 of a mile to the library. estimate how far sheri walked in total? PLS HELP D:
Answer:
29/16, or 1.81 in decimal form.
Step-by-step explanation:
To solve this, we have to find a common denominator between the 2 fractions.
We cannot simplify 15/16 any further without getting a decimal, so let's change 7/8.
A common denominator between the 2 fractions is 16, so multiply 7/8 by 2 to get 14/16.
Now, we have to find out how far she walked in total, so add 14/16 + 15/16:
29/16
Hope this helps! :)
A certain drug is used to treat asthma. In a clinical trial of the drug. 19 of 276 treated subjects experienced headaches (based on data from the manufacturer). The accompanying calculator display shows results from a test of the claim that less than 10% of treated subjects experienced headaches. Use the normal distribution as an approximation to the binomial distribution and assume a 0.05 significance level to complete parts (a) through (e) below
a. Is the test two-tailed, let-tailed, or right-tailed?
Left-tailed test
ORight tailed test
Two-tailed test
b. What is the test statistic?
(Round to two decimal places as needed)
a. The test is a left-tailed test. b. What is the test statistic is -1.73.
a. The test is a left-tailed test because we are testing the claim that less than 10% of treated subjects experienced headaches.
b. To find the test statistic, we'll use the normal distribution as an approximation to the binomial distribution. Here are the steps:
Step 1: Determine the null and alternative hypotheses.
H0: p = 0.10 (The proportion of treated subjects experiencing headaches is equal to 10%.)
H1: p < 0.10 (The proportion of treated subjects experiencing headaches is less than 10%.)
Step 2: Calculate the sample proportion (p-hat).
p-hat = number of subjects with headaches / total subjects = 19 / 276 ≈ 0.0688
Step 3: Determine the standard error.
SE = sqrt((p * (1 - p)) / n) = sqrt((0.10 * (1 - 0.10)) / 276) ≈ 0.0180
Step 4: Calculate the test statistic (z-score).
z = (p-hat - p) / SE = (0.0688 - 0.10) / 0.0180 ≈ -1.73
So, the test statistic is -1.73 (rounded to two decimal places).
Know more about test statistic here:
https://brainly.com/question/15110538
#SPJ11
(1 point) For each of the following integrals find an appropriate trigonometric substitution of the form x = f(t) to simplify the integral. A. [(5x (5x² – 2)3/2 dx – X = b. X2 dx 4x2 + 6 X = C. | xV5x + 50x + 118dx X = d. El 19-50 х dx –119 – 5x2 + 50x X =
All Trigonometric Expressions:
a. ∫5x * [tex](5x^{2} - 2)^{(3/2)[/tex]dx = ∫2sin³θ cos²θ dθ
b. ∫[tex]x^{2} dx/(4x^{2} + 6)[/tex]= ∫tan²θ sec²θ dθ
c. ∫x√(5x + 50)/(x + 118)dx = ∫(5tan²θ – 25)tanθ sec³θ dθ
d. ∫(19 – 50x)/(119 – 5x² + 50x)dx = -2∫dθ/(25tan²θ + 94)
a. The integral ∫5x * [tex](5x^{2} - 2)^{(3/2)[/tex]dx, we can use the substitution x = (2/5)sinθ. This gives dx = (2/5)cosθ dθ and 5x² – 2 = 5(2/5 sinθ)² – 2 = 2cos²θ. Substituting these expressions into the integral, we get:
∫5x * [tex](5x^{2} - 2)^{(3/2)[/tex]dx
= ∫2sin³θ cos²θ dθ
b. For the integral ∫x²dx/(4x² + 6), we can use the substitution x = tanθ. This gives dx = sec²θ dθ and 4x² + 6 = 4tan²θ + 6 = 2sec²θ. Substituting these expressions into the integral, we get:
∫x²dx/(4x² + 6) = ∫tan²θ sec²θ dθ
c. For the integral ∫x√(5x + 50)/(x + 118)dx, we can use the substitution
x + 25 = 5tan²θ.
This gives x = 5tan²θ – 25 and dx = 10tanθ sec²θ dθ, and
5x + 50 = 25sec²θ. Substituting these expressions into the integral, we get:
∫x√(5x + 50)/(x + 118)dx
= ∫(5tan²θ – 25)tanθ sec³θ dθ
d. For the integral:
∫(19 – 50x)/(119 – 5x² + 50x)dx,
we can use the substitution
5x – 5 = √(50x – 5)tanθ.
This gives x = (1/10)[(tanθ)² + 1] and
dx = (1/5)(tanθ sec²θ) dθ, and 119 – 5x² + 50x
= (25tan²θ + 94)².
Substituting these expressions into the integral, we get:
∫(19 – 50x)/(119 – 5x² + 50x)dx
= -2∫dθ/(25tan²θ + 94)
Learn more about integrals visit: brainly.com/question/27419605
#SPJ4
Correct Question:
For each of the following integrals find an appropriate trigonometric substitution of the form x = f(t) to simplify the integral.
a. ∫5x * ∫5x * [tex](5x^{2} - 2)^{(3/2)[/tex]dx
b. ∫[tex]x^{2} dx/(4x^{2} + 6)[/tex]
c. ∫x√(5x + 50)/(x + 118)dx
d. ∫(19 – 50x)/(119 – 5x² + 50x)dx
2. 5 x 10^22. 5 × 10 2 and 3. 7 x 10^53. 7 × 10 5
The first number, 5 x [tex]10^22,[/tex] can be written as 5 followed by 22 zeros:
5,000,000,000,000,000,000,000
To simplify means to make something easier to understand or do by reducing complexity, removing unnecessary details, or using simpler language or concepts.
The second number , 5 × 10², can be written as 5 followed by 2 zeros: 500
The third number, 3.7 x 10⁵³, can be written as 3.7 followed by 53 zeros:
370,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000
or in scientific notation as 3.7 x 10⁵³
To learn more about Simplify here
https://brainly.com/question/723406
#SPJ4
Simplify
2. 5 x 10^22. 5 × 10 2 and 3. 7 x 10^53. 7 × 10 5
If a catapult is launched from the origin
and has a maximum height at (5.2, 6.3)
What is the coordinate where it would
land?
Answer: (10.4, 0).
Step-by-step explanation: In order to determine the coordinate where the projectile would land, we need to find the parabolic path followed by the projectile. Since the catapult is launched from the origin (0,0), and has a maximum height at (5.2, 6.3), we can find the vertex of the parabola, which is also (5.2, 6.3).
The standard form of a parabola is y = a(x - h)^2 + k, where (h,k) is the vertex of the parabola. In this case, h = 5.2 and k = 6.3.
We can use the information from the origin to determine the value of 'a'. Substituting x = 0 and y = 0, we get:
0 = a(0 - 5.2)^2 + 6.3
Solving for 'a':
a(5.2)^2 = -6.3
a = -6.3 / (5.2)^2
Now that we have 'a', we can rewrite the equation of the parabola:
y = a(x - 5.2)^2 + 6.3
To find the x-coordinate where the projectile would land, we need to find the other x-intercept (the other point where y = 0). Since the parabola is symmetric, the other x-intercept will be equidistant from the vertex:
x = 5.2 * 2 = 10.4
Now, we can plug in x = 10.4 into the equation to find the y-coordinate:
y = a(10.4 - 5.2)^2 + 6.3
However, since we are looking for the landing coordinate, which is an x-intercept, we know the y-coordinate will be 0.
Thus, the coordinate where the projectile would land is (10.4, 0).
What is the length of line segment EB? 42 units 50 units 65 units 73 units
The length of line segment EB is Option C- 65 units .
In a parallelogram, opposite sides are equal. Therefore, AE = CB = p-8 and CE = AB = 2p-58. Also, AD and BE are diagonals of the parallelogram, and they bisect each other. Thus, we can say that DE = EB. So, we have DE = p+15 and EB = p+15.
AE + EB + CE + DE = perimeter of parallelogram
(p-8) + (p+15) + (2p-58) + (p+15) = 4p - 56
4p - 56 = 4(p - 14)
Therefore, the perimeter of the parallelogram is 4(p-14). Since opposite sides are equal in a parallelogram, we can say that:
2(p-8) + 2(2p-58) = 4(p-14)
p = 50
Substituting the value of p in the equation EB = p+15, we get:
EB = 50 + 15 = 65.
However, we need to remember that DE = EB. Therefore, the length of line segment EB is 65 units (Option C).
learn more about parallelogram here:
https://brainly.com/question/1563728
#SPJ4
the complete question is:
AE = p 8, CE = 2p 58, and DE = p + 15 in the parallelogram illustrated. How long is the line segment EB?
A - 40units
B.50 units
C.65 units
D.73 units
Answer:
c) 65 units
Step-by-step explanation:
2023 on edge
Which graph represents the inequality \(y>x^2-3\)?
A graph that represents the inequality y > x² - 3 include the following: A. graph A.
What is the general form of a quadratic function?In Mathematics and Geometry, the general form of a quadratic function can be modeled and represented by using the following quadratic equation;
y = ax² + bx + c
Where:
a and b represents the coefficients of the first and second term in the quadratic function.c represents the constant term.Since the leading coefficient (value of a) in the given quadratic function y > x² - 3 is positive 1, we can logically deduce that the parabola would open upward. Also, the value of the quadratic function f(x) would be minimum at -3.
Read more on quadratic functions here: brainly.com/question/29499209
#SPJ1
18 white buttons nine black buttons and three blue buttons what is the probability that she will get a white button and a blue button
The probability that she will get a white button and a blue button is 18/30 * 3/29 = 9/145 or approximately 0.062.
The total number of buttons is 18 + 9 + 3 = 30. The probability of getting a white button on the first draw is 18/30. After drawing a white button, there are 29 buttons left, including 3 blue buttons, so the probability of getting a blue button on the second draw is 3/29.
To find the probability of both events happening, we multiply the probabilities:
18/30 * 3/29 = 9/145
Therefore, the probability that she will get a white button and a blue button is 9/145 or approximately 0.062.
Learn more about probability
https://brainly.com/question/24756209
#SPJ4
7. At a factory, smokestack A pollutes the air twice as fast as smokestack B. When the factory runs the smokestacks together, they emit a certain amount of pollution in 15 hours. How much time would it take each smokestack to emit that same amount of pollution?
The time taken for the smokestack A is 22.5 hours.
The time taken for the smokestack B is 45 hours.
What is the time taken for the smokestack?
The time taken for the smokestack is calculated as follows;
Let's the rate at which smokestack B emits pollution = r
Then smokestack A = 2r
Their total rate of pollution combined;
= r + 2r
= 3r
The total amount of pollution they emitted after 15 hours;
= 3r x 15
= 45r pollution
The time taken for each to emit the same amount;
rate of B = r pollution/hr
time of B = 45r/r = 45 hours
rate of A = 2r
time of A = 45r/2r = 22.5 hours
Learn more about rate of pollution here: https://brainly.com/question/29028192
#SPJ1
What is the mean absolute deviation of the data set?
{12, 10, 10, 8, 6, 7, 7, 12}
01
02
06
09
Answer:
(b) 2
Step-by-step explanation:
You want the mean absolute deviation of the data ...
{12, 10, 10, 8, 6, 7, 7, 12}
MADThe mean absolute deviation (MAD) is the mean of the absolute values of the differences between the data values and their mean. The calculation of this is shown in the attachment.
The mean absolute deviation is 2.
<95141404393>