Can someone help me asap? It’s due tomorrow. I will give brainiest if it’s correct.

According to the algebraic expressions, the sum of four smaller rectangles is 96.

First, let's consider the figure as one large rectangle. To find the area of a rectangle, we multiply its length by its width. In this case, the length of the rectangle is 8 and the width is 6 + 2 + 4 = 12. Therefore, the expression for the area of the rectangle can be written as:

Area = length x width

Area = 8 x 12

Area = 96

So the area of the figure as one large rectangle is 96 square units.

To find the area of each rectangle, we'll use the formula for the area of a rectangle, which is length x width. We can see from the figure that:

Rectangle A has a length of 8 and a width of 6

Rectangle B has a length of 8 and a width of 2

Rectangle C has a length of 4 and a width of 6

Rectangle D has a length of 4 and a width of 2

Therefore, the expressions for the area of each rectangle can be written as:

Area_A = length x width

Area_A = 8 x 6

Area_A = 48

Area_B = length x width

Area_B = 8 x 2

Area_B = 16

Area_C = length x width

Area_C = 4 x 6

Area_C = 24

Area_D = length x width

Area_D = 4 x 2

Area_D = 8

To find the total area of the figure, we simply add up the areas of the four rectangles. Therefore, the expression for the area of the figure as a sum of four smaller rectangles can be written as:

Area = Area_A + Area_B + Area_C + Area_D

Area = 48 + 16 + 24 + 8

Area = 96

To know more about expression here

https://brainly.com/question/14083225

#SPJ4

There is a 21.19% chance that the daily production falls within 32.3 and 36.9 liters.

To find the probability that the daily production of a herd of cows is between 32.3 and 36.9 liters, we need to use the normal distribution properties.

Given that the mean daily production of the herd of cows is 30 liters and the standard deviation is 8.2 liters, we can standardize the distribution and use the standard normal distribution table or calculator. We calculate the z-scores for the values 32.3 and 36.9, which tells us how many standard deviations away from the mean each value is.

Using a standard normal cumulative distribution function, we can find that the probability of the daily production falling between 32.3 and 36.9 liters is approximately 0.2119. This means that there is a 21.19% chance that the daily production falls within this range.

Learn more about standard deviation:

https://brainly.com/question/23907081

#SPJ4

The probability that daily production is between 32.3 and 36.9 liters is 0.18949 or 18.9%.

To determine the probability that the herd's daily production will be between 32.3 and 36.9 liters, we must compute the z-scores for each number and use a standard normal distribution table to calculate the area under the curve between those z-scores.

To find out the z - scores we need use z-score formula:

Z = X−μ / σ

where μ  is the mean, σ is the standard deviation and X is the observed value. In the problem μ  is 30 liters, X₁ = 32.3 liters & X₂ = 36.9 liters and σ = 8.2 liters.

Substituting the values in the equation to find the z-score for 32.3 liters is:

z₁ = (32.3 - 30) / 8.2 = 0.2804

z₁ = 0.28049

Substituting the values in the equation to find the z-score for 36.9 liters is:

z₂ =( 36.9 - 30) / 8.2 =  0.8414

z₂ = 0.8414

We can determine the area under the curve between these two z-scores using a conventional normal distribution table. The area between z = 0.28049 and z = 0.8414 and the probability is approximately 0.1894.

As a result, the probability that the herd's daily output is between 32.3 and 36.9 liters is about 0.1894.

Learn more about Standard Normal Distribution Table:

https://brainly.com/question/30404390

#SPJ4

The value of 5 pints is equal to 10 cups.

A liquid measurement with a capacity of 1/8 of a gallon.  If we recall, 8 ounces equals 1 cup and 2 cups (or 16 ounces) equals 1 pint. One pint is made up of 16 fluid ounces, which is also equivalent to 2 cups, 1/4 quart, and 1/8 gallon. Normally, there are 2 cups in 1 pint, however this might vary depending on the ingredients. A pint has two cups in it.

Two cups equal one pint. You must multiply the volume in pints by a factor of two to convert from pt to c.

Hence, 1 pt = 2c

Substitute the values;

Multiple both the sides by 5

5 * 1pt = 5* 2c

5pt = 10c

Therefore, The value of 5 pints is equal to 10 cups.

To know more about pints check the below link:

https://brainly.com/question/26941359

#SPJ9

Answer:

y = 1/2x - 4

Step-by-step explanation:

The y-intercept is at -4 (counting by ones).

The slope would be 1/2, going up one time and to the right twice, plotting the point (2, -3).

Since we know that the distance between the origin and A' should be d, which is 7/3 times the distance between the origin and A.

Therefore, the correct answer is D.

What is Pentagon?

A pentagon is a geometric shape that has five sides and five angles. It is a two-dimensional polygon, which means it is a flat shape with straight sides.

To find the coordinates of the dilated pentagon A'B'C'D'E', we need to multiply the coordinates of each vertex of pentagon ABCDE by the scale factor. Since the origin is the center of dilation, we can use the formula:

(x', y') = k(x, y)

where (x, y) are the original coordinates of a vertex, k is the scale factor, and (x', y') are the new coordinates of the corresponding vertex.

To find the scale factor, we can use the distance formula to find the distance between the origin and any one of the vertices. Let's use vertex A for convenience:

Distance OA = sqrt((-1-0)² + (1-0)²) = sqrt(2)

Distance OA' = k * Distance OA

We want to find the scale factor that will result in a dilation centered at the origin, so we want OA' to be the desired distance between the origin and A'. Let's say that distance is d. Then:

d = k * sqrt(2)

Solving for k, we get:

k = d / sqrt(2)

We are not given the desired distance between the origin and A', so we cannot determine the exact value of k. However, we can still determine which answer choice represents the correct dilation.

Let's try answer choice A:

(x', y') = (3/7x, 3/7y)

This represents a dilation with a scale factor of 3/7. But we already know that the scale factor should be d / sqrt(2). Since d could be any value, we cannot say for sure whether 3/7 is the correct scale factor.

Answer choice B:

(x', y') = (x + 3/7, y + 3/7)

This represents a translation, not a dilation. Therefore, it cannot be the correct answer.

Answer choice C:

(x', y') = (x + 7/3, y + 7/3)

This represents a dilation with a scale factor of 1. This is not the correct scale factor, since we know that the distance between the origin and A' should be greater than the distance between the origin and A.

Answer choice D:

(x', y') = (7/3x, 7/3y)

This represents a dilation with a scale factor of 7/3. This is the correct scale factor, since we know that the distance between the origin and A' should be d, which is 7/3 times the distance between the origin and A.

Therefore, the correct answer is D.

To learn more about Pentagon from the given link:

https://brainly.com/question/17054992

#SPJ1

The surface area of the two solids are listed below:

Case 1 - 232 square centimeters

Case 2 - 240 square centimeters

The surface area of a solid is the sum of the areas of all its faces. There are two cases of solids whose surface areas must be determined. The area formulas for triangle and rectangle are, respectively:

Triangle

A = 0.5 · b · h

Rectangle

A = b · h

Case 1

A = (6 cm) · (8 cm) + 2 · 0.5 · (6 cm) · (12 cm) + 2 · 0.5 · (8 cm) · (14 cm)

A = 232 cm²

Case 2

A = 2 · 0.5 · (8 cm) · (3 cm) + (8 cm) · (12 cm) + 2 · (5 cm) · (12 cm)

A = 24 cm² + 96 cm² + 120 cm²

A = 240 cm²

To learn more on surface areas of solids: https://brainly.com/question/31126484

#SPJ1

Answer:

a

Step-by-step explanation:

to find the missing side x , subtract the sum of the 5 given sides from the given perimeter.

x = 137 - (39 + 37 + 12 + 10 + 13) = 137 - 111 = 26 m

Answer:

Rhombus

Step-by-step explanation:

This would be a rhombus.

In a rhombus, all sides are equal and opposite sides are parallel.

We are 95% confident that the proportion of all central Florida reefers who use LED lighting falls between .648 and .752.

The correct practical interpretation is: "We are 95% confident that the proportion of all central Florida reefers who use led lighting falls between .648 and .752."

This means that if we were to take multiple random samples of 700 experienced central Florida reefers, 95% of the intervals created would contain the true population proportion of reefers who use LED lighting.

So, based on this sample, we can say with 95% confidence that the true proportion of all central Florida reefers who use LED lighting is somewhere between .648 and .752.

For similar question on proportion.

https://brainly.com/question/16869517

#SPJ11

We are 95% confident that the proportion of all central Florida reefers who use LED lighting falls between .648 and .752 from mean.

The correct practical interpretation is: "We are 95% confident that the proportion of all central Florida reefers who use LED lighting falls between .648 and .752." This means that based on the sample of 700 experienced reefers, we can estimate with 95% confidence that the true proportion of all reefers in central Florida who use LED lighting is likely to be between .648 and .752.

This confidence interval was constructed using sampling techniques, and in repeated sampling, 95% of the intervals created would contain the population mean.
We are 95% confident that the proportion of all central Florida reefers who use LED lighting falls between .648 and .752.

Learn more about mean here:

https://brainly.com/question/31101410

#SPJ11

Answer:

  48

Step-by-step explanation:

You want to know the number of cans 4 inches tall with a volume of 50.24 in³ that will fit on a shelf with a height and depth of 10 inches and a length of 50 inches.

The diameter of the can will be found from the volume formula:

  V = (π/4)d²h

  d = √(4V/(πh)) = √(4·50.24/(4·3.14)) = √16 = 4 . . . inches

The cans are 4 inches in diameter.

The number of cans that will fit in each dimension will be the integer part of the dimension divided by the size of the can in that dimension.

  Height: (10 in)/(4 in/can) = 2.5 cans . . . . cans will fit 2 cans high

  Depth: (10 in)/(4 in/can) = 2.5 cans . . . . cans will fit 2 cans deep

  Length: (50 in/4 in/can) = 12.5 cans . . . . cans will fit 12 cans long

A total of 2 × 2 × 12 = 48 cans will fit on the shelf.

__

Additional comment

There will be 2 inches of empty space in each direction.

<95141404393>

The surface area of the actual ramp, including the underside, is approximately 15.38 yd².

What is triangle?

A triangle is a three-sided polygon with three angles. It is a fundamental geometric shape and is often used in geometry and trigonometry.

To find the surface area of the actual ramp, we need to first find the dimensions of the ramp.

We are given that the scale model of the ramp is a right triangular prism with legs of 8 in, 5 in, and 5 in, and a height of 3 in. We can use these dimensions to find the dimensions of the actual ramp.

Since the ramp is a scale model, the ratio of the dimensions of the model to the actual ramp is the same for all corresponding dimensions. The height of the triangular base in the actual ramp is given as 0.6 yards, which is equal to 21.6 inches. So, we have:

height of actual ramp / height of model = 21.6 in / 3 in = 7.2

We can use this ratio to find the dimensions of the actual ramp:

height of actual ramp = 7.2 * 3 in = 21.6 in

length of actual ramp = 7.2 * 8 in = 57.6 in

width of actual ramp = 7.2 * 5 in = 36 in

Now we can find the surface area of the actual ramp. The surface area of the top and bottom of the ramp is the area of the triangular base plus the area of the rectangle formed by the length and width of the ramp:

Area of triangular base = (1/2) * base * height = (1/2) * 5 in * 5 in = 12.5 in²

Area of rectangular top and bottom = length * width = 57.6 in * 36 in = 2073.6 in²

Total surface area of top and bottom = 2 * (Area of triangular base + Area of rectangular top and bottom) = 2 * (12.5 in² + 2073.6 in²) = 4153.2 in²

The surface area of the sides of the ramp is the area of the three rectangles formed by the height and width of the ramp:

Area of one side rectangle = height * width = 21.6 in * 36 in = 777.6 in²

Total surface area of sides = 3 * Area of one side rectangle = 3 * 777.6 in² = 2332.8 in²

Finally, we add the surface area of the top and bottom to the surface area of the sides to get the total surface area of the ramp:

Total surface area of ramp = Surface area of top and bottom + Surface area of sides = 4153.2 in² + 2332.8 in² = 6486 in²

Converting to yards and rounding to two decimal places, we get:

Total surface area of ramp = 6486 in² / (36 in/yd)² = 15.38 yd² (rounded to two decimal places)

Therefore, the surface area of the actual ramp, including the underside, is approximately 15.38 yd².

To learn more about triangle from the given link:

https://brainly.com/question/2773823

#SPJ1

An inequality for this situation "A cruise ship can carry at most 3500 passengers." is x ≤ 3,500.

A graph of the inequality x ≤ 3,500 is shown in the image attached below.

What is an inequality?

In Mathematics and Geometry, an inequality simply refers to a mathematical relation that is typically used for comparing two (2) or more numerical data and variables in an algebraic equation based on any of the inequality symbols;

Note: At most simply refers to less than or equal to (≤) in Mathematics.

Since the cruise ship can only carry at most 3500 passengers, an inequality that models this situation is given by;

x ≤ 3,500

Read more on inequality here: brainly.com/question/19732652

#SPJ1

After performing long division on (x3+3x2-x+2)/(x-1) we get x² + 4x +3 leaving a remainder of 5.

Long division refers to the method of performing a division of two numbers or polynomials by hand. Furthermore, it involves several steps to evaluate in order to find a quotient and a remainder. It is considered an important and crucial form of practice in the branch of mathematics.                  

In the subject of dividing a polynomial, first, we divide the highest degree term of the dividend by the highest degree term of the divisor, and the remaining result is subtracted from the dividend. The calculation is as follows in the picture

To learn more about long division,

https://brainly.com/question/30059812

#SPJ4

The value of the digit 5 in 24,513 is 1,000 times the value of the digit 5 in 357.

In the number 357, the digit 5 is in the ones area, which means that its value is just 5. We can write this number as 5 x 10^0, where 10 is the base of our number system, and the exponent 0 represents the ones area.

Now, to find out how many times the value of the digit 5 in 357 is compared to the value of the digit 5 in 24,513, we need to divide the value of the digit 5 in 24,513 by the value of the digit 5 in 357.

We have:

Value of 5 in 24,513 = 5 x 10³

Value of 5 in 357 = 5 x 10⁰

So,

Value of 5 in 24,513 ÷ Value of 5 in 357 = (5 x 10³) ÷ (5 x 10⁰)

We can simplify this expression by dividing 5 by 5, which gives us:

(5 x 10³) ÷ (5 x 10⁰) = 10³ = 1000

To know more about digit here

https://brainly.com/question/30142622

#SPJ4

The possible coordinates of point A are (-2, -2) and (-2, 4).

Distance is a numerical measurement of the amount of space between two points. It is the length of a path that connects two points in a space, usually measured in units such as meters, kilometers, miles, etc.

In Euclidean space (a type of space

We can use the distance formula to find the possible coordinates of point A. The distance formula between two points (x1, y1) and (x2, y2) is:

d = √((x2 - x1)² + (y2 - y1)²)

Let the coordinates of point A be (x, y), where x = -2 (the x-coordinate of point A is -2, as given in the problem).

Then, we can write the distance formula as:

5 = √((2 - (-2))²+ (1 - y)²)

Simplifying this equation, we get:

25 = (2 - (-2))²+ (1 - y)²

25 = 16 + (1 - y)²

9 = (1 - y)²

Taking the square root of both sides, we get:

3 = 1 - y or 3 = -(1 - y)

Solving for y in each case, we get:

y = -2 or y = 4

Therefore, the possible coordinates of point A are (-2, -2) and (-2, 4).

To know more about distance visit:

https://brainly.com/question/26550516

#SPJ1

Testing is only one part of the overall assessment process.

What is evaluation in education?

Assessment is an ongoing process of gathering evidence of what each student actually knows, understands, and can do. A comprehensive evaluation approach includes a combination of formal and informal evaluation (formative, preliminary, and summative).

What is an assessment? Also what does it mean?

At the course level, assessments provide important data on the breadth and depth of student learning. Evaluation is more than scoring. It's about measuring student learning progress. Assessment is therefore defined as “the process of data gathering to better understand the strengths and weaknesses of a student's learning”. 

Learn more about assessment

brainly.com/question/28046286

#SPJ1

Answer:

Image

Step-by-step explanation:

Based on the information provided, Mateo has drawn a line to represent the parallel cross-section of the triangular prism. Is he correct? Yes, he is correct. Here's an explanation:

A triangular prism has two triangular bases and three rectangular faces. When a triangular prism is lying on a rectangular face, it means that one of its rectangular faces is on the bottom. If Mateo draws a line along the length of this rectangular face, he is creating a parallel cross-section of the triangular prism.

This is because the line he drew is parallel to the triangular base of the prism, and the two bases are also parallel to each other. A parallel cross-section is created when a plane cuts through a solid parallel to its base, and in this case, Mateo's line fulfills this condition.

Therefore, Mateo is correct in representing the parallel cross-section of the triangular prism by drawing a line along the length of a rectangular face.

Learn more about prism at https://brainly.com/question/31315453

#SPJ11

Answer:

m = 6

Step-by-step explanation:

We have the proportion:

12/m = 18/9

To solve for m, we can cross-multiply the terms in the proportion:

12 × 9 = 18 × m

Simplifying both sides of the equation, we get:

108 = 18m

Dividing both sides by 18, we get:m = 6

Therefore, the solution to the proportion 12/m = 18/9 is m = 6.

Answer: m = 6

Step-by-step explanation:

First, we will rewrite this proportion:

     [tex]\displaystyle \frac{12}{m} =\frac{18}{9}[/tex]

Next, we will cross-multiply:

     12 * 9 = 18 * m

     108 = 18m

Lastly, we will divide both sides of the equation by 18:

     m = 6

We can also solve this proportion another way.

     We know that 18/9 = 2, so 12/m must equal 2 as well.

     12/6 = 2, so m = 6.

The graphical representation that would be the best for this data would be a circle graph. That is option C.

A circle graph, which is also called a pie chart, is defined as a type of data representation where by the information concerning a data set is displayed in a circular form and in a way that the various information displayed is a percentage of the total data set involved.

Now, the number of students that were surveyed = 100 students.

The number of subjects that are preferred by the students would be represented as x,y,z.

Therefore to represent the number of students that preferred a particular subject on the circle graph the following is carried out;

For subject x = Number of X/100 × 360/1

Learn more about histogram here:

https://brainly.com/question/30764929

#SPJ1

a. The bagel needs to be dilated by a scale factor of 5 to serve 25 people.
b. 25 times more cream cheese will be required for the dilated bagel compared to the original bagel.

a. To find the scale factor for the large bagel that serves 25 people, we need to find the square root of the ratio of the number of people the large bagel serves to the number of people the small bagel serves.
Scale factor = [tex]\sqrt{(large_bagel_serving / small_bagel_serving)}[/tex]
Scale factor = [tex]\sqrt{(25 / 1)}[/tex]
Scale factor =[tex]\sqrt{ 25}[/tex]
Scale factor = 5
So, the bagel needs to be dilated by a scale factor of 5 to serve 25 people.
b. Since the bagels are in the same shape, the area of the large bagel will be the square of the scale factor times the area of the small bagel.

The cream cheese is spread over the area, so the ratio of the cream cheese needed for the large bagel to the small bagel will be the same as the ratio of their areas.
Ratio of cream cheese = [tex](scale factor)^2[/tex]
Ratio of cream cheese = [tex](5)^2[/tex]
Ratio of cream cheese = 25
So, 25 times more cream cheese will be required for the dilated bagel compared to the original bagel.

For similar question on factor.

https://brainly.com/question/28339205

#SPJ11

The dilated bagel requires 25 times more cream cheese than the original single serving bagel. Round your answer to the nearest tenth: 25.0 times more cream cheese.

a) To determine the scale factor for the dilated bagel, first, we need to find the ratio between the area of the large bagel and the area of a single serving bagel. Since the large bagel serves 25 people, the area ratio will be 25:1.

Area ratio = (scale factor)^2
25:1 = (scale factor)^2

To find the scale factor, take the square root of the area ratio:
scale factor = √25 = √(25/1) = 5

Therefore, the bagel will need to be dilated by a scale factor of 5 to serve 25 people.

b) Since the thickness of the cream cheese remains the same on both bagels, we only need to consider the difference in area between the two bagels. As calculated before, the area ratio is 25:1.

Thus, the dilated bagel requires 25 times more cream cheese than the original single serving bagel. Round your answer to the nearest tenth: 25.0 times more cream cheese.

to learn more about the ratio click here:

https://brainly.com/question/28851311

#SPJ11

Answer:

a)

jenny - $160 + $50X = total

hong - $90X = total

b)

$160 + $50X = $90X

Step-by-step explanation:

a)

b)

The general solution of the given higher-order differential equation is y(x) = c1e[tex].^{x/2}[/tex]cos((1/2)√5x) + c2e[tex].^{x/2}[/tex]sin((1/2)√5x) + c3eˣ + c4e⁻ˣ.

The given higher-order differential equation is:

16(d⁴y/dx⁴) + 40(d²y/dx²) + 25y = 0

To find the general solution of this differential equation, we can assume that y(x) has the form:

y(x) = e[tex].^{rx}[/tex]

where r is a constant to be determined.

Differentiating y(x) four times with respect to x, we get:

d⁴y/dx⁴ = r⁴e[tex].^{rx}[/tex]

Differentiating y(x) two times with respect to x, we get:

d²y/dx² = r²e[tex].^{rx}[/tex]

Substituting these derivatives and y(x) into the differential equation, we get:

16(r⁴e[tex].^{rx}[/tex]) + 40(r²e[tex].^{rx}[/tex]) + 25e[tex].^{rx}[/tex] = 0

Simplifying this equation by dividing through by e[tex].^{rx}[/tex], we get:

16r⁴ + 40r² + 25 = 0

This is a quadratic equation in r². Solving for r² using the quadratic formula, we get:

r² = [-40 ± √(40² - 4(16)(25))] / 2(16)

r² = [-40 ± √(3600)] / 32

r² = [-40 ± 60] / 32

We get two possible values for r²:

r² = 5/4 or r² = 1

Taking the square root of each value, we get:

r = ±(1/2)i√5 or r = ±1

Thus, the general solution of the given higher-order differential equation is:

y(x) = c1e[tex].^{x/2}[/tex]cos((1/2)√5x) + c2e[tex].^{x/2}[/tex]sin((1/2)√5x) + c3eˣ + c4e⁻ˣ

where c1, c2, c3, and c4 are constants determined by the initial or boundary conditions of the specific problem.

Learn more about differential equation :

https://brainly.com/question/14926307

#SPJ4

The complete question is :

find the general solution of the given higher-order differential equation : 16(d⁴y/dx⁴) + 40(d²y/dx²) + 25y = 0

y = 6 sin [(π/10)t] + 8; equation gives us the depth of the water at the dock as a function of time elapsed since the wave started passing the dock.

A sinusoidal function is a mathematical function that oscillates or fluctuates in a periodic manner, following a sine or cosine curve.

If the wave approaches a dock in Carmel where the normal depth is 8 meters and varies sinusoidal with time, then we can use the equation for a sinusoidal function:

y = A sin (ωt + φ) + C

where: A is the amplitude of the wave, which is given as 12 meters

ω is the angular frequency, which can be calculated as 2π / T, where T is the period of the wave (20 minutes in this case)

t is the time elapsed since the wave started passing the dock

φ is the phase angle, which we can assume to be 0 since we are not given any information about it

C is the vertical displacement of the wave from the normal depth, which is 8 meters in this case

putting the given values into the equation,

y = 12 sin [(2π/20)t] + 8

Simplifying this equation,

y = 6 sin [(π/10)t] + 8

This equation gives us the depth of the water at the dock as a function of time elapsed since the wave started passing the dock.

To know more about sinusoidal function, visit:

https://brainly.com/question/29529184

#SPJ1

Answer:

The answer is 28

Step-by-step explanation:

sin0=opp/hyp

let hyp be x

sin30=14/x

0.5x=14

divide both sides by 0.6

x=14/0.5

x=28

The appropriate statement for the null hypothesis is "the depression status and caffeinated coffee consumptions are independent."

The statement that is not appropriate for the null hypothesis according to hypothesis testing is "the levels of depression status and caffeinated coffee consumptions are equally likely."

This statement implies that there is an equal chance of having different levels of depression status and different levels of caffeinated coffee consumption, which is not a suitable assumption for the null hypothesis.

The null hypothesis should state that there is no significant relationship between the two variables, and the distribution of one variable does not depend on the distribution of the other variable.

Therefore, the appropriate statement for the null hypothesis is "the depression status and caffeinated coffee consumptions are independent."

Learn more about hypothesis testing

brainly.com/question/30588452

#SPJ11

The required sample size is  8.90400.

Given a student wants to make a guess within 0.03 of the true ratio with a 90% confidence level.

Margin of Error, E = 0.03

significance level α=0.10  {90% confidence}

A given estimate of the percentage of population p is p = 0.79.

The critical value for the significance level α = 0.10 is Zc = 1.645. This can be determined using either Excel or a normal probability table.

Use the following formula to calculate the minimum sample size required to estimate the percentage of population p within the required margin of error.

n≥p(1-p)(Zc÷E)²

n = 0.796×(1-0.796)(1.645÷0.03)²

n = 0.796 x 0.204 x 54.833

n = 8.90400

Therefore, the resample size required to meet the condition is n ≥  8.90400 and must be an integer. From this, we conclude that the minimum sample size required is n =  8.90400

Lear more about confidence level here :-

https://brainly.com/question/22851322

#SPJ4

A statistical test conducted to determine whether to reject or not reject a hypothesized probability distribution for a population is known as the goodness of fit test.

Option C is the correct answer.

We have,

A goodness of fit test is conducted to determine whether a hypothesized probability distribution for a population adequately fits or matches the observed data.

It compares the observed data to the expected distribution specified by the hypothesis and assesses whether there is sufficient evidence to reject the hypothesis.

This test is commonly used when testing the fit of categorical data to a specified distribution, such as testing whether the observed data follows a specific discrete probability distribution

(e.g., Poisson, binomial, multinomial) or whether the observed data matches the expected proportions in different categories.

The goodness of fit test evaluates the degree of discrepancy between the observed and expected frequencies or proportions and provides a statistical measure, such as the chi-squared test statistic, to assess the level of agreement or disagreement between the observed data and the hypothesized distribution.

Therefore,

A statistical test conducted to determine whether to reject or not reject a hypothesized probability distribution for a population is known

the goodness of fit test.

Learn more about the goodness of fit test here:

https://brainly.com/question/32668212

#SPJ12