can someone help me with G
thanks

When analyzing the data from an experiment, it is common to use excel plots to visualize the results. In this case, two excel plots will be made. The first plot will be used to determine the integrated rate law, which is a mathematical equation that describes the rate of a reaction over time.

The second plot will be used to determine the slope of the integrated rate law.

The slope of the integrated rate law is an important parameter that can be used to determine the order of a reaction. The order of a reaction describes how the rate of the reaction changes as the concentration of reactants changes. For example, a first-order reaction is one in which the rate is directly proportional to the concentration of the reactant, while a second-order reaction is one in which the rate is proportional to the square of the concentration of the reactant.

To determine the slope of the integrated rate law, it is necessary to plot the natural logarithm of the concentration of the reactant versus time. The slope of this plot is equal to the negative of the rate constant for the reaction. By comparing the slope of the integrated rate law to the known values for the rate constant of a first-order or second-order reaction, it is possible to determine the order of the reaction.

In summary, analyzing the data from an experiment involves creating excel plots to visualize the results. The slope of the integrated rate law is an important parameter that can be used to determine the order of a reaction. This is done by plotting the natural logarithm of the concentration of the reactant versus time and comparing the slope to known values for the rate constant of a first-order or second-order reaction.

To know more about integrated rate law, refer to the link below:

https://brainly.com/question/8314253#

#SPJ11

The answer is B. three neutrons. The symbol for the hydrogen isotope 3H is written as H-3, which means it has one proton and three particles in the nucleus (neutrons and/or protons). Since the atomic number of hydrogen is 1 (which corresponds to the number of protons in the nucleus), we know that this isotope has one proton. Therefore, the remaining three particles in the nucleus must be neutrons.

The neutron is composed of two down quarks, each with 1/3 elementary charge, and one up quark, with 2/3 elementary charge. The nucleus is bound together by the residual effect of the strong force, a fundamental interaction that governs the behaviour of the quarks that make up the individual protons and neutrons.

Subtract the atomic number from the atomic mass.

Since the vast majority of an atom's mass is found its protons and neutrons, subtracting the number of protons (i.e. the atomic number) from the atomic mass will give you the calculated number of neutrons in the atom.

to know more about  three neutrons click this link -

brainly.com/question/1328543

#SPJ11

Thermally-insulating gloves should be used when handling hot or cold objects and when nitrile or butyl gloves are not available.

They are especially useful when a high degree of dexterity is needed and "double-gloving" is not possible. These gloves are designed to provide protection from extreme temperatures while also offering insulation to keep the hands warm or cool. They are a must-have for anyone working in environments with extreme temperatures, and can greatly reduce the risk of injury or discomfort. Latex gloves provide excellent grip and flexibility, making them ideal for tasks that require precision and dexterity. They are also breathable and provide some insulation from hot and cold temperatures.

To learn more about gloves click here https://brainly.com/question/30427786

#SPJ11

The equilibrium constant for the reaction brcl(g) ⇌ 1/2 br2(g) + 1/2 cl2(g) is 232/[tex]x^{2}[/tex], where x is the concentration of BrCl at equilibrium.

The equilibrium constant for the reaction of bromine with chlorine to form bromine monochloride is 58.0 at a certain temperature, given by the equation [tex]br_{2}[/tex](g) + [tex]Cl_{2}[/tex](g) ⇌ 2brcl(g). To find the equilibrium constant for the reaction brcl(g) ⇌ 1/2 [tex]br_{2}[/tex](g) + 1/2 [tex]Cl_{2}[/tex]g), we can use the following equation:
K' = ([BrCl]/([[tex]br_{2}[/tex]]/2)([[tex]Cl_{2}[/tex]]/2))
where K' is the equilibrium constant for the second reaction, and [BrCl], [[tex]br_{2}[/tex]], and [Cl2] are the concentrations of the species at equilibrium. Using the equilibrium constant for the first reaction (K = 58.0) and the stoichiometry of the two reactions, we can write:
K = [tex][BrCl]^2[/tex]/([[tex]br_{2}[/tex]][[tex]Cl_{2}[/tex]])
Simplifying, we get:
K' = 4K/([[tex]br_{2}[/tex]][[tex]Cl_{2}[/tex]])
Substituting the value of K (58.0) and the appropriate concentrations at equilibrium, we get:
K' = 4(58.0)/([(1/2)x]([1/2]x)) = 232/[tex]x^{2}[/tex]

Learn more about equilibrium constant here:

https://brainly.com/question/15118952

#SPJ11

The complete question is :

the equilibrium constant for the reaction of bromine with chlorine to form bromine monochloride is 58.0 at a certain temperature. br2(g) cl2(g) 2brcl(g) what is the equilibrium constant for the following reaction? brcl(g) 1/2 br2(g) 1/2 cl2(g)

Hydrides, carbides, and alkali metals are typically reactive reducing agents, which can donate electrons and undergo oxidation in a chemical reaction. Therefore the correct option is option B.

In a chemical reaction, oxidising agents are compounds that have a propensity to take electrons and go through reduction. Compatibility problems with oxidising agents can lead to fire, explosion, the production of poisonous fumes, or the emission of heat.

When exposed to air, pyrophorics spontaneously catch fire, and they frequently work as reducing agents as well. While reducing agents like hydrides, carbides, and alkali metals are frequently incompatible with oxidising agents, pyrophorics can also be incompatible with oxidising agents. These particular substances are specified in the question. Therefore the correct option is option B.

For such more question on reducing agents:

https://brainly.com/question/18370994

#SPJ11

Solubility is a measure of the maximum amount of a substance (solute) that can dissolve in a given amount of solvent at a specified temperature and pressure.

Given information,

Amount of known solute (NaCl) = 40 grams

Amount of known solvent = 80 grams

Let the amount of unknown solute be x

We know that,

Amount of known solute/Amount of known solvent = Amount of unknown solute/Amount of unknown solvent

40/80 = x/100

As solubility is expressed in 100 grams.

x = 40 × 100/80

x = 50 grams

Thus, the solubility of NaCl is 50/100 grams of water. The solution already contains 40 grams of NaCl. It requires only adding 10 grams of NaCl to make the solution saturated. Hence, option A is correct.

Learn more about solubility, here:

https://brainly.com/question/31493083

#SPJ1

The concentration of a solute's saturated solution at the specified temperature determines how soluble it is in a given solvent is called its solubility .

Thus, As a weight ratio concentration (or mass ratio concentration), solubility data for a solubility curve is often represented in units of grams of solute per 100 g of solvent (g/100 g).

A substance's solubility is determined by:  the type of the solute (intermolecular forces);The solvent's nature (intermolecular forces). temperature (Le Chatelier's Principle & Solubility)

Solubility For a specific temperature (often 25°C), rules (charts) and solubility tables (tables of solubility) are typically provided for a substance's solubility in water.

Thus, The concentration of a solute's saturated solution at the specified temperature determines how soluble it is in a given solvent is called its solubility .

Learn more about Solubility, refer to the link:

https://brainly.com/question/29661360

#SPJ1

The main answer to the question is [AB] = 0.113 M. The concentration of AB after 10.0 s can be calculated using the integrated rate law for a second-order reaction.

The rate law for the given reaction is rate = k[AB]^2.

To determine the concentration of [AB] after a certain time, we can use the integrated rate law for a second-order reaction, which is:
1/[AB]t - 1/[AB]0 = kt
Where [AB]t is the concentration of AB at time t, [AB]0 is the initial concentration of AB, k is the rate constant, and t is the time elapsed.
Plugging in the given values, we get:
1/[AB]t - 1/1.50 = (0.200 L/mol*s)(10.0 s)
Solving for [AB]t, we get:
[AB]t = 0.113 M
Therefore, the concentration of AB after 10.0 s is 0.113 M.

Hence,  The concentration of AB after 10.0 s can be calculated using the integrated rate law for a second-order reaction. Plugging in the given values, we get [AB]t = 0.113 M.

learn more about reaction click here:

https://brainly.com/question/11231920

#SPJ11

A buffer prevents the acidification of a solution when an acid is added by neutralizing excess hydrogen ions (H+) from the acid. This maintains the solution's pH within a narrow range, ensuring that the solution does not become too acidic.

A buffer is a solution that is able to resist changes in pH when an acid or base is added to it. It does this by containing both a weak acid and its corresponding conjugate base, which can neutralize the added acid without significantly changing the pH of the solution. When an acid is added to a buffer solution, the weak acid component of the buffer will react with the added acid, producing its conjugate base. This reaction helps to prevent the acidification of the solution by maintaining a relatively constant pH level. Essentially, the buffer is able to absorb and neutralize the excess hydrogen ions produced by the added acid, thereby preventing the pH of the solution from becoming too acidic.

To learn more about buffer click here,

https://brainly.com/question/24188850

#SPJ11

Electron ionization (EI) is a widely used method for ionizing molecules in mass spectrometry. In this method, a high-energy electron beam is directed towards the sample molecules, causing them to lose an electron and form a cation. The process of ionization is initiated by the collision of the high-energy electrons with the sample molecules. This collision causes the ejection of an electron from the sample molecule, resulting in the formation of a positively charged ion or cation.

The electron beam typically has an energy of 70 eV, which is sufficient to ionize most organic molecules. The ions produced by EI are typically fragmented due to the high energy of the electron beam, resulting in a complex mass spectrum. The fragmentation pattern of the ion is characteristic of the molecule, and can be used to identify the molecule by comparing the mass spectrum to a database of known spectra. EI is a useful method for identifying small organic molecules, such as drugs and metabolites, and for determining the molecular structure of these molecules.
In summary, electron ionization involves the collision of high-energy electrons with sample molecules, resulting in the formation of positively charged ions or cations. The characteristic fragmentation pattern of these ions can be used to identify the molecule and determine its molecular structure.

for more such questions on  Electron ionization

https://brainly.com/question/30831422

#SPJ11

The energy of the n=5 level in a hydrogen atom can be calculated using the Rydberg formula, and is -2.42 × 10^-18 J. The problem is being solved using the Bohr model of the hydrogen atom, which assumes that electrons move in circular orbits around the nucleus.

Explanation: The Bohr model of the hydrogen atom assumes that the electron moves in circular orbits around the nucleus. The energy levels of the electron are quantized and can be calculated using the equation E = -13.6 eV/n^2, where n is the principal quantum number. To convert this to joules, we use the conversion factor

[tex]1 eV = 1.602 × 10^-19 J.[/tex]

Using the given energy of the n=1 level, we can calculate the energy of the electron in joules as E = -21.8 × 10^-19 J. To find the energy of the n=5 level, we can use the Rydberg formula, which gives the energy of any level in a hydrogen atom as E = -13.6 eV/n^2 × (1/n^2 - 1/1^2). Plugging in n=5, we get

[tex]E = -2.42 × 10^-18 J.[/tex]

Therefore, the energy of the n=5 level in a hydrogen atom is -2.42 × 10^-18 J.

Learn more about nucleus here:

https://brainly.com/question/17704494

#SPJ11

Corrosive chemical typically involve either acid-base reactions or redox reactions, and sometimes both. Therefore the correct option is option D.

A corrosive chemical can interact with a substance in an acid-base reaction by either giving or receiving protons, which can harm the substance.

For instance, powerful acids that react with the metal to produce hydrogen gas, such as hydrochloric acid, can corrode metals. Redox reactions include the transfer of electrons from or to a substance by corrosive chemicals, which causes the substance to degrade.

For instance, iron rusts because iron oxidises, which occurs when iron loses electrons to oxygen in the presence of water. Some caustic substances can also conduct redox as well as acid-base reactions. For instance, sulfuric acid can corrode metals by oxidising the metal and causing an acid-base interaction. Therefore the correct option is option D.

For such more question on chemical:

https://brainly.com/question/29886197

#SPJ11

If we 800,000 atoms of the radioactive substance. After the 3 half-lives have past, the number of the atoms remain are 100000 atoms.

The initial amount of the radioactive substance = 800,000 atoms

The Number of half lives = 3  half - lives

The amount remaining of the radioactive element after the "n" half lives :

N = [tex]No[/tex][tex](1/2)^{n}[/tex]

Where,

No = the initial amount

n = Number of the half lives

N = 800,000( 1/2 )³

N = 100000 atoms

N is the number of the reaming atoms = 100000 atoms.

Therefore, the number of remaining atoms after the 3 half - lives is 100000 atoms.

To learn more about half-lives here

https://brainly.com/question/23760456

#SPJ1

Galvanic anodes are generally used where A) small amounts of current are required.

Galvanic anodes are typically used for cathodic protection, which is a technique used to prevent corrosion of metal structures by making them the cathode in an electrochemical cell. Galvanic anodes work by sacrificing themselves, meaning that they are more easily corroded than the metal structure being protected. As a result, the galvanic anode will corrode and the metal structure will be protected from corrosion.

Galvanic anodes are typically used in situations where only small amounts of current are required, as they have a relatively low current output. This makes them ideal for protecting small metal structures such as pipelines, boats, and offshore platforms. In situations where larger amounts of current are required, impressed current systems are typically used instead.

Soil resistivity is also an important consideration when choosing a cathodic protection system. In general, higher soil resistivity will require a more powerful cathodic protection system in order to provide adequate protection. Galvanic anodes are generally not recommended for use in soils with high resistivity, as they may not be able to provide sufficient protection. In these situations, impressed current systems may be a better choice.

Finally, the use of galvanic anodes may not be practical in large remote ground beds. In these situations, impressed current systems are often used instead, as they are better able to provide the high levels of current required to protect large structures over long distances.

Know more about the wet-set bead.

https://brainly.com/question/31563784

#SPJ11

Fructose-2,6-bisphosphate (Fru-2,6-BP) is an important regulator of glycolysis and gluconeogenesis in cells.

Fru-2,6-BP is a regulator of both glycolysis and gluconeogenesis through its effects on the activity of phosphofructokinase-1. By increasing the activity of phosphofructokinase-1, Fru-2,6-BP facilitates glycolysis and inhibits gluconeogenesis.

Conversely, when the level of Fru-2,6-BP is decreased, phosphofructokinase-1 activity is decreased, which results in increased gluconeogenesis and decreased glycolysis.

Thus, Fru-2,6-BP plays an important role in the regulation of glycolysis and gluconeogenesis and helps to maintain a balance between these two pathways.

In summary, high levels of Fru-2,6-BP can inhibit flux through the glycolytic pathway by increasing the activity of phosphofructokinase-1, while flux through the gluconeogenic pathway is inhibited by decreasing the activity of phosphofructokinase-1.

Know more about glycolysis here

https://brainly.com/question/14076989#

#SPJ11

The acid environment, the behavior of metals can be predicted based on their activity series. The activity series ranks metals in order of their tendency to undergo oxidation reactions, with the most reactive metals at the top and the least reactive metals at the bottom.

The Based on this activity series, it can be determined that in an acid environment, metals more active than hydrogen will be corroded, while those less active will not be corroded. This is because in an acidic solution, the hydrogen ions present are highly reactive and will react with metals that are more reactive than them to form metal ions and hydrogen gas. This process is known as corrosion. On the other hand, metals less active than hydrogen will not be corroded in an acid environment because they are less reactive than the hydrogen ions present. These metals will instead remain in their metallic form and will not undergo any significant reaction. It is important to note that the corrosive behavior of metals in an acid environment can be influenced by other factors such as concentration of the acid and temperature. It is also possible for some metals to have a protective oxide layer that prevents corrosion even in an acidic environment.

learn more about acid here.

https://brainly.com/question/14072179

#SPJ11

1. Endothermic processes:

2. Exothermic processes:

Endothermic processes in chemistry are those that absorb heat from their surroundings, resulting in a decrease in temperature of the surroundings. These processes require energy input to occur and often involve the breaking of chemical bonds. Some examples of endothermic processes include melting of ice, evaporation of water, and the reaction between baking soda and vinegar. In an endothermic reaction, the energy required to break the bonds of the reactants is greater than the energy released when new bonds are formed in the products.

Therefore, the overall change in energy of the system is positive, meaning energy is absorbed from the surroundings. Endothermic reactions are important in many industrial processes, such as the production of ammonia and the cracking of petroleum. Additionally, endothermic processes play a crucial role in biological systems, such as photosynthesis, where plants convert light energy into chemical energy in an endothermic reaction.

To learn more about Endothermic processes visit here:

brainly.com/question/8897369

#SPJ4

Benzaldehyde is an aromatic aldehyde with the chemical formula C7H6O. It is a colorless liquid that has a characteristic almond-like odor. Benzaldehyde is an important precursor to many chemicals such as pharmaceuticals, dyes, and perfumes.

It is also used as a flavoring agent in food products.When benzaldehyde is refluxed with aqueous alcoholic KCN, it undergoes a nucleophilic addition reaction to produce a cyanohydrin. A cyanohydrin is a compound that has a hydroxyl (-OH) group and a cyano (-CN) group attached to the same carbon atom. In this reaction, the KCN acts as a nucleophile and adds to the carbonyl group of the benzaldehyde, forming a cyanohydrin.The reaction mechanism involves the formation of an intermediate, benzaldehyde cyanohydrin, which then reacts with the KCN to form the final product. The cyanohydrin can be further hydrolyzed to produce a carboxylic acid or reduced to produce an amine. Therefore, the correct answer to the question is B. cyanohydrin.It is important to note that benzaldehyde is toxic and can cause skin and eye irritation. It is also a flammable liquid and should be handled with care. In addition, KCN is a highly toxic substance and should be handled with extreme caution. Proper safety measures should be taken when conducting this reaction.

Learn more about chemical here

https://brainly.com/question/29886197

#SPJ11

The products of this reaction are Tin (Sn) and Water (2H_{2}O). The reactants, Tin(IV) oxide (SnO_{2}) and Hydrogen gas (2H_{2}), undergo a redox reaction to produce these products.

In the given chemical reaction, SnO_{2} + 2H_{2]} → Sn + 2H_{2}O., the products are Sn (Tin) and 2H_{2}O (Water). Let's analyze the reaction step-by-step.
1. The reactants are SnO_{2} (Tin(IV) oxide) and 2 H_{2}(Hydrogen gas).

Tin is commonly used in the manufacturing of metal alloys, such as bronze and pewter, and can also be found in the production of tinplate for food packaging.
2. The reaction involves the reduction of SnO_{2}  and the oxidation of H_{2}
3. SnO2 loses oxygen and is reduced to Sn (Tin). Meanwhile, H2 gains oxygen and is oxidized to H2O (Water).
4. The balanced chemical equation is: SnO_{2} + 2H_{2]} → Sn + 2H_{2}O.
In summary, the products of this reaction are Tin (Sn) and Water (2H_{2}O). The reactants, Tin(IV) oxide (SnO2) and Hydrogen gas (2 H_{2}), undergo a redox reaction to produce these products.

learn more about Tin (Sn) Refer: https://brainly.com/question/3835242

#SPJ11

This is the higher energy chair conformation of cis-1,3-dimethyl cyclohexane.

      H

       |

H----C----H

|    |    |

H    C----H

    |    |

    H    CH3

        |

        CH3

An energy chair is a representation of the conformational energy of a cyclohexane molecule. Cyclohexane is a six-carbon cyclic molecule with sp3 hybridized carbons and all of its carbon atoms are connected by single bonds. The energy chair is a 3D representation of cyclohexane in which the molecule is depicted as a chair-like structure.

The energy chair is used to show the different conformations of cyclohexane, which can interconvert through a process known as ring flipping. The chair conformation represents the lowest energy state of cyclohexane, while other conformations, such as the boat or twist-boat conformation, are higher in energy. The energy levels of the different conformations of cyclohexane are determined by the angle of the carbon-carbon bonds and the steric hindrance between the hydrogen atoms attached to the carbons. The chair conformation is the most stable because it minimizes steric hindrance and maximizes the overlap of orbitals between adjacent carbons.

To learn more about Energy chair visit here:

brainly.com/question/13479093

#SPJ4

Answer:

O2

Explanation:

The green box is O2 because oxygen exists in the atmosphere as a diatomic atom, meaning it must have two oxygens (di prefix means two)

Diatomic atoms never exist naturally unless there are two.

Answer:

A volcanic eruption can be classified as constructive if it results in the formation of new land or the addition of material to existing land. This can occur when the lava and ash ejected from the volcano cools and solidifies, creating new landforms such as islands or volcanic mountains. The deposition of volcanic ash and other materials can also enrich the soil, making it more fertile for plant growth. Therefore, if the volcanic eruption results in the creation of new land or enrichment of soil, it would be considered a constructive outcome.

Explanation:

The correct answer is: O depends on the relative values of the acid and base dissociation constants.

The pH at the equivalence point of a weak acid and weak base titration cannot be predicted solely based on their concentrations. It depends on the relative values of their acid and base dissociation constants (Ka and Kb), which determine their relative strengths. If Ka > Kb, the resulting salt will be acidic, and the pH at the equivalence point will be below 7. If Kb > Ka, the salt will be basic, and the pH at the equivalence point will be above 7. If Ka = Kb, the salt will be neutral, and the pH at the equivalence point will be equal to 7.When titrating a weak acid with a weak base that have the same concentration, the equivalence point will have a pH that depends on the relative values of the acid and base dissociation constants.

Learn more about dissociation constants here:

https://brainly.com/question/28197409

#SPJ11

The model in use helps in providing aid in fields that the plant needs to survive, hence it proves to be a crucial step in the growth of the plant.

Mushrooms from fungal mycelial networks in the dirt  decompose organic matter and convert them into nutrients. Growing trees, and other plants, can then take these nutrients via their roots. This process is called decomposition.

In this process, matter from the environment (in the form of CO2 and H2O) is obtained  and rearranged into organic molecules (sugars). These organic molecules can impluse the producers’ life processes via cellular respiration (which releases CO2 and heat), or they can be saved as biomass.

The process of photosynthesis is also involved in the creation of usable energy. In the light-dependent reactions, which take place at the thylakoid membrane, chlorophyll absorbs energy from sunlight and then converts it into chemical energy with the use of water.

To learn more about photosynthesis,
https://brainly.com/question/19160081
#SPJ4

i hope this helps a little

Based on the given information and the graph provided, I agree with the student's proposal that the reaction is zero order with respect to compound x. This is because the graph shows a straight line with a negative slope, indicating that the rate of decomposition of compound x is constant and independent of the concentration of the compound.

In other words, the rate of reaction is not affected by the concentration of the compound, which is a characteristic of zero-order reactions.
Furthermore, the linear relationship between [x] and time also suggests that the reaction follows a first-order kinetic model. This means that the rate of reaction is proportional to the concentration of the compound, but since the graph shows a straight line, the rate must be independent of the concentration, indicating a zero-order reaction.
Additionally, the fact that the reaction occurs at a constant temperature suggests that the reaction is not affected by external factors such as temperature or pressure, which would also support the zero-order kinetics model.
Therefore, based on the evidence presented in the graph and the given information, it can be concluded that the reaction is zero order with respect to compound x.

for more such question on zero order reaction

https://brainly.com/question/21663229

#SPJ11

when kc is much less than 1, the equilibrium lies towards the side of reactants, and the concentration of reactants is much greater than the concentration of products at equilibrium. the concentration of reactants is much greater than the concentration of products. Hence, option (a) is the correct answer.

The value of kc is the equilibrium constant which is a measure of the extent to which a reaction will proceed towards the formation of products. When kc is much less than 1, it means that the numerator of the equilibrium constant expression, which represents the concentration of products, is much smaller than the denominator, which represents the concentration of reactants. This indicates that the reaction is not proceeding much towards the formation of products and is mostly staying in the form of reactants.
Therefore, at equilibrium, the concentration of reactants will be much higher than the concentration of products. The other options are incorrect as they do not explain the behavior of a reaction where kc is much less than 1. A catalyst will not change the position of equilibrium, and the concentrations of reactants and products will not be equal at equilibrium.
In conclusion, when kc is much less than 1, the equilibrium lies towards the side of reactants, and the concentration of reactants is much greater than the concentration of products at equilibrium.

for more such questions on  equilibrium

https://brainly.com/question/19340344

#SPJ11

When the equilibrium constant Kc is much less than 1 in a reaction, it indicates that at equilibrium, the system is dominated by reactants rather than products. Therefore, the concentration of the reactants is much greater than the concentration of the products.

In the given reaction, when the equilibrium constant (Kc) is much less than 1, it means the reaction system contains mostly reactants, not products, when equilibrium is reached. Therefore, option 'A' is correct: the concentration of reactant is much greater than the concentration of products.

The value of the equilibrium constant Kc provides us with a sense of the ratio of product concentrations to reactant concentrations at equilibrium. If Kc is less than one, this suggests that, at equilibrium, the concentration of the reactants is larger than the concentration of the products. Establishment of the equilibrium does not tell us about the speed of the process. Some equilibriums are reached quickly, and others happen slower and no observable change can be seen over a lengthy period.

Note that the equal concentrations of reactants and products are not mandatory for the equilibrium. The system reaches equilibrium when the rate of the forward reaction is equal to the rate of the backward reaction, and not necessarily when the concentrations of reactants and products are equal.

https://brainly.com/question/32227445

#SPJ12

The change in Gibbs free energy for the given process is -15,269 J/mol.

The change in Gibbs free energy for a gas undergoing a reversible isothermal process can be expressed as:

ΔG = -RT ln (p₂/p₁)

where ΔG is the change in Gibbs free energy, R is the gas constant (8.314 J/mol*K), T is the temperature in Kelvin, and p₁ and p₂ are the initial and final pressures, respectively.

Substituting the given values, we have:

ΔG = -8.314 J/mol*K * 400 K * ln (10 bar / 0.1 bar)

ΔG = -8.314 J/mol*K * 400 K * ln (100)

ΔG = -8.314 J/mol*K * 400 K * 4.605

ΔG = -15,269 J/mol

Therefore, the change in Gibbs free energy for the given process is -15,269 J/mol.

Learn more about  Gibbs free energy,

https://brainly.com/question/20358734

#SPJ4

The stoichiometric concept is used here to determine the moles of Aluminium used. Stoichiometry is an important concept in chemistry which helps us to use balanced chemical equation to calculate the amount of reactants and products.

Chemical stoichiometry refers to the quantitative study of the reactants and products involved in a chemical reaction. It help us to determine how much substance is needed or is present.

The balanced equation is:

4Al  +  3O₂     →     2Al₂O₃

1.35 mol O₂ × 4 mol Al / 3 mol O₂ = 1.8 mol Al

To know more about stoichiometry, visit;

brainly.com/question/19642113

#SPJ1

1. The activation energy for the reaction is 30 KJ

2. The change in energy for the reaction is -20 KJ

3. The reaction is exothermic

4. The letter that represents the products is B

5. The letter that represents the reactants is A

The activation energy for the reaction can be obtained as follow:

Activation energy = Peak energy - Energy of reactant

Activation energy = 70 - 40

Activation energy = 30 KJ

The change in energy can be obtain as follow:

Change in energy = Energy of product - energy of reactant

Change in energy = 20 - 40

Change in energy = -20 KJ

From the above calculation, we can see that the change in energy is negative (i.e -20 KJ).

Thus, we can conclude that the reaction is exothermic reaction.

The letter which represents products given the energy diagram is letter B

The letter which represents reactants given the energy diagram is letter A

Learn more about activation energy:

https://brainly.com/question/29060218

#SPJ1