Answer:
Rainwater is very important in my area, we use it for crops, animals and for everyday essentials. It's collected in jars and kept stored, it can be filter then boiled to extract any bacteria. Then I usually sit it outside in the sun to grab the suns energy. This saves me a lot of money on utilities like my water bill for example. It's safe for everyone and poses no threat to the environment.
Explanation:
This is a natural alternative for anyone who loves nature and alkaline water
Answer:
Blue crab is an important resource in my region. It is harvested in Chesapeake Bay. People in my region have been eating blue crabs for hundreds of years. Blue crabs are usually harvested in traps called crab pots. Most crabs are harvested commercially, but recreational crabbing is also important. Crab harvesting in Chesapeake Bay is regulated by the states of Maryland and Virginia, and special licenses are required. Limits are placed on the number of crab pots and the sizes of crabs that can be kept. Even though regulations are in place to protect the crabs, their numbers are declining due to deteriorating water quality in Chesapeake Bay. The crabs require additional protection, but too many restrictions could put people out of work because blue crabs are a popular, traditional food in the region, and thousands of people make a living from crab fishing. The natural resources management of the crabs is inadequate because the crabs continue to be harvested in an unsustainable way.
Explanation:
EDMENTUM ANSWER
Name the process:
binary,fission budding,vegetative propagation, regeneration
Answer:
Fission Budding
Explanation:
I hope this helps. I think it may be right.
Which of the following is an example of a nonspecific immune response?
Muscle control and body coordination are controlled by the:.
Answer:
The Cerebellum's Balancing Act
Explanation:
The cerebellum is at the back of the brain, below the cerebrum. It's a lot smaller than the cerebrum. But it's a very important part of the brain. It controls balance, movement, and coordination (how your muscles work together).
Muscle control and body coordination are controlled by the cerebellum.
The cerebellum is a highly specialized region of the brain located at the back of the skull, beneath the cerebrum. It is usually referred to as the "little brain" due to its appearance and position. Although it constitutes only about 10% of the brain's total volume, the cerebellum contains an enormous number of neurons.
It plays a crucial role in motor control, coordination, and balance. It receives information from various sensory systems. It also receives input from the cerebral cortex, which is involved in planning and initiating movements.
Learn more about the cerebellum, here:
https://brainly.com/question/11219813
#SPJ6
Use the drop-down menus to answer the questions about binary fission. binary fission is a form of reproduction. binary fission results in cells that are .
Binary fission is a form of agamous reproduction. The cells produce by binary fission are two, and the cells that are produced are identical.
What is binary fission?Binary fission is the division of the body into two identical bodies.
Binary fission is an agamous reproduction, in which the animals divide the cells into two cells and the second cell is called the daughter cell.
The single-celled animal reproduces by binary fission. Examples are hydra, bacteria, etc.
Thus, the correct options are 1. agamous reproduction, 2. Two, and 3. Identical cells.
Learn more about binary fission
https://brainly.com/question/82412
Just did the assignment
Explanation:
During mitosis, the X shaped figures that can be seen in prophase, anaphase and metaphase are called_______.
Answer:
chromosomes probably....... because X shaped ( are usually condensed form of chromatin) which divide .
Plants lose a great deal of water from their leaves in a process referred to as:.
Answer:
Plants lose a great deal of water from their leaves in a process referred to as: transpiration
Explanation:
Expected frequency of CC genotype
Answer:
0.18
Explanation:
What are 'prokaryotic organisms'? What are some examples?
Explanation:
Prokaryotic organisms are type of cells that are clearly different from eukaryotic cells (human or plant cells), since they lack nucleus and other type of organelles and differ with size. ( some of them have flagella which helps these cells to move)
Example: Any type of bacteria can be considered as a Prokaryotic cell
Prokaryotic organisms are organisms that lack a true nucleus or in other words that have a primitive nucleus. This includes bacteria, E-coli, etc.
What is the difference between prokaryotes and eukaryotes?Eukaryotes are the organisms that have a well developed nucleus. They also have membrane bound cell organelles. These are generally multicellular.
Prokaryotes have a primitive nucleus, and the organelles are also not membrane-bound. These are unicellular.
Prokaryotes are divided into bacteria and archaebacteria. Most of them are small, single-celled and relatively simple. Example cyanobacteria, bacteria, E-coli, etc.
Thus, the organisms like bacteria, which lack a true nucleus are called prokaryotes.
For more information regarding prokaryotes, visit:
https://brainly.com/question/15329345
#SPJ3
Photosynthesis is vital for maintaining levels of atmospheric oxygen. Please select the best answer from the choices provided T F.
Photosynthesis is a key determining process to regulate the level of atmospheric oxygen. This statement is true.
What do you mean by Photosynthesis?Photosynthesis may be defined as a process by which plants use sunlight, water, and carbon dioxide to create oxygen and energy in the form of sugar.
Without the process of photosynthesis, the evolution of oxygen can not be imagined. Photosynthesis takes carbon dioxide from the atmosphere, and in respect of this oxygen is liberated in our surroundings.
Therefore, Photosynthesis is a key determining process to regulate the level of atmospheric oxygen.
To learn more about Photosynthesis, refer to the link:
https://brainly.com/question/19160081
3. use the simulation to observe the first-generation offspring from the cross between flowers c and a. what is the most likely genotype of flower c? use a punnett square to justify your explanation.
To observe the first generation offspring of the cross between the flowers c and a. the most likely genotype of flower c is its color.
What is genetic probability?Probability serves to mathematically estimate the possibility of events that happen by chance, that is, as a matter of luck. It can be defined by the following formula: Where P is the probability that an event will occur, A is the number of desired events, and S is the total number of possible events.
With this information, we can observe the first generation offspring of the cross between the flowers c and a. the most likely genotype of flower c is its color.
Learn more about genotype in brainly.com/question/12116830
Answer: The most likely genotype is color.
Explanation:
Name : Grade and Section: I. Read and analyze each item carefully. Choose the letter that corresponds to your answer. 1. It is defined as a push or pull that starts, stops or changes the direction of a moving object. A. Motion B. Force C. Energy D. Food 2. It is a force that opposes motion between two surfaces sticking or touching together. A. Gravity B. Electrical C. Friction D. Magnetic 3. Which has the greatest frictional force among these surfaces? A. Polished floor B. Tiled floor C. Wet floor D. Sandy floor 4. Friction is a force that opposes motion. It acts in the direction of a moving object. A. same B. opposite C. upward D. downward 5. Which of the following statements best describes friction? A. It is a force that occurs when surfaces touch each other. B. It is a force that occurs in smooth surfaces. C. It is a force that occurs between solids and liquids. D. It is a force that occurs only on rough surfaces. 6. When an object rolls over a surface is produced. A. Fluid friction B. Rolling friction C. Sliding friction D. Static friction -7. Which of the following statement is true about rolling friction? A. It is produced when an object is at rest. B. It is produced when an object is moving in water C. It is produced when an object is rolled in a surface. D. It is produced when an object rub against each other. 8. Which is an example of an object that can produce rolling friction when rolls over a surface? A. Ball B. Cabinet C. Shoe box D. Table 9. Riding a bicycle and using of wheelbarrow (kariton) are examples of. A. Fluid friction B. Rolling friction C. Sliding friction D. Static friction 10. Which of the following shows an example of rolling friction? A. A kite flying C. A soccer ball rolling on the ground. B. A paper boat floating. D. A picture frame on the table. 11. What is sliding friction? A. It occurs between two surfaces that come in contact with each other. B. It occurs in stationary objects or objects at rest. C. It occurs between moving objects and a liquid or between an object moving in the air. D. It opposes the motion of the wheel turning along a surface. 12. What type of friction occurs when there is more force needed to travel an object in a surface than rolling Friction? A. Static Friction C. Sliding Friction B. Fluid Friction D. Air friction 13. The following statements are examples of sliding friction EXCEPT ONE. Which is it? A. A block being slid across the floor C. A glass being pushed across the table B. Jeans on your legs when putting it on D. When a train goes around 14. Which type of friction opposes the sliding of objects over a surface? A. Static Friction C. Fluid Friction B. Sliding Friction D. Rolling Friction 15. Mucus produced by snails, help them move along the ground. How does the mucus help snails move? C. Mucus reduces friction. A. Mucus is cold. B. Mucus leaves a trail. D. Mucus makes the snail lighter.
Since forces cause a change in motion or state of a body, friction is a force which opposes motion of an object over another.
What is frictional force?Frictional force or friction is the force that opposes the relative motion of one object over another at their surface of contact.
The two types of friction are:
static friction andkinetic frictionRough surfaces experience the greatest friction while smooty surfaces experience the least friction.
Hence, friction can be reduced by lubrication or polishing.
Based on the property of forces and friction:
Force is defined as a push or pull that starts, stops or changes the direction of a moving object.Friction is a force that opposes motion between two surfaces sticking or touching together.A sandy floor has the greatest frictional force among these surface.Friction is a force that opposes motion. It acts in the opposite direction of a moving object. Friction is a force that occurs when surfaces touch each other. Rolling friction is produced when an object rolls over a surface is produced.Rolling friction is produced when an object is rolled on a surface. Round objects like a Ball produces rolling friction.Riding a bicycle and using of wheelbarrow (kariton) are examples of rolling frictionA soccer ball rolling on the ground is an example of rolling friction.Sliding friction occurs between moving objects and a liquid or between an object moving in the air.Static Friction occurs when there is more force needed to travel an object in a surface than rolling Friction.A train going around its tracks is rolling frictionSliding friction opposes the sliding of objects over a surface.Mucus produced by snails, help them move along the ground because Mucus reduces friction.Therefore, it can be concluded that generally, friction opposes motion of an object over another.
Learn more about friction at: https://brainly.com/question/1424758
Which of the following best describes the total amount of carbon in the system made up of the Earth and its atmosphere?
A. It remains constant because oxygen converts to carbon in the geosphere and hydrosphere.
B. It continually increases as carbon is produced during cellular respiration and trapped in the atmosphere.
C. It continually decreases as carbon is used up during photosynthesis and trapped in the biosphere.
D. It remains constant because carbon cycles through the atmosphere, hydrosphere, biosphere, and geosphere.
Answer:
A
Explanation:
It remains constant because carbon cycles through the atmosphere, hydrosphere, biosphere, and geosphere.
What is the control group of plants can hear music or sound
Answer:
Wht are the answer choices
Explanation:
Which of the following would be considered a biotic factor in an ecosystem?
water
flower
fog
soil
Answer:
flower
Explanation:
biotic is a living organism including plants of any type fog spil and water are not living
Go to the Model tab at the bottom of the simulation, and select the Star-Planet orbit. Decrease the mass of the Star to the minimum possible amount, and begin the simulation. What happened? Why do you think this happened?
Answer: The orbiting body left the orbit. The gravitational attraction between the two objects was too weak for a stable orbit to form Explanation:Its right!!
Answer: The orbiting body left the orbit. The gravitational attraction between the two objects was too weak for a stable orbit to form.
Explanation:
Which resource do you think is most important to
your survival: water, air, a place to live, or food?
Answer:
air
Explanation: without air you can cant even live
This article discusses a group of scientists who are studying an ecosystem. What ecosystem are the scientists studying?
Answer:
This article discusses a group of scientists who are studying an ecosystem. What ecosystem are the scientists studying? A the Hudson River ecosystem.
Explanation:
Which of the following is needed for your immune system to create an appropriate antibody to protect against a particular disease?
A
an existing antibody
B
the antigen of a particular pathogen
C
pathogen cytoplasm
D
DNA from the pathogen
Answer:
d.
Explanation:
You need a small dose of the disease so your body can fight it and become immune.
Answer:
D
Explanation:
Two unlinked loci affect mouse fur color. nn or nn mice are agouti. mice with genotype nn are albino because all pigment production is blocked, regardless of the phenotype at the second locus. at the second locus, the a allele (agouti coat) is dominant to the a allele (black coat). what would be the result of a cross between two agouti mice of genotype nnaa?
The result of a cross between two agouti mice of genotype nnaa are albino offspring because mice with genotype nn are albino (pigment production is blocked by epistasis).
What is epistasis?Epistasis is a genetic phenomenon where the presence of a gene variant alters a phenotype influenced by other genes.
A gene is epistatic when a variant (allele) can alter the expression of another gene in the same signaling pathway.
Epistatic interactions are very common in nature and many traits are influenced by this type of interaction.
Learn more about epistasis here:
https://brainly.com/question/25217589
How do biotechnologists amplify DNA in order to perform genetic testing?
Answer:
A technique used to amplify, or make many copies of, a specific target region of DNA.
Explanation:
What is one possible result of a mutation within a start codon? A stop codon?
The result of a mutation within a start codon is the non-start of the protein translation, whereas a mutation in the stop codon will long the length of the protein.
What are transcription and translation?Transcription refers to the process by which a fragment of DNA is used as a template to create an RNA molecule, usually a messenger RNA.
Subsequently, this mRNA sequence can be used to create a protein by a process called translation.
The triplets of nucleotides (codons) in the mRNA are read by the ribosomes during translation, thereby a mutation in the start codon would produce a nonfunctional mRNA.
Moreover, a mutation in the stop codon will long the length of the resulting protein sequence.
Learn more about translation here:
https://brainly.com/question/25703686
there are three categories of chemical reactions based on changes in chemical structure. The first category is
Hello people ~
The suspended particles released by combustion of coal in air may lead to a health disease. Select the correct option.
A. Goitre
B. Arthritis
C. Asthma
D. Bone cancer
C. Asthma
- Goitre is due to lack of iodine in diet.
- Arthritis due to inflammation of the joints.
- Bone cancer due to radiation.
- Asthma due to intake of harmful gases like CO₂.
Answer:
Asthma
Explanation:
Burning of coal in air causes combustion the reaction is given by
C+O_2-->CO_2Carbon dioxide is a harmful gas for our lungs so it causes Asthma
Which of these describe an inheritance pattern of autosomal genetic disorders? Select all that apply
For an autosomal dominant disorder to be expressed, two copies of the abnormal allele must be inherited.
For an autosomal recessive disorder to be expressed, two copies of the abnormal allele must be inherited.
For an autosomal recessive disorder to be expressed, just one copy of the abnormal allele must be inherited.
For an autosomal dominant disorder to be expressed just one ceny nf the abnormal allele must
The following describe the inheritance pattern of autosomal genetic disorders.
For an autosomal dominant disorder to be expressed just one copy of the abnormal allele must be inherited.For an autosomal recessive disorder to be expressed, two copies of the abnormal allele must be inherited.What is autosomal genetic disorder?Autosomal disorders is a form.of genetic disorders which is as a result of mutations in genes on the autosomes or chromosomes. Each person have two copies of autosomal gene, one of the alleles are inherited from each parent. Autosomal dominant disorders occur when there is a mutation in one copy of the gene.
Therefore, The following describe the inheritance pattern of autosomal genetic disorders.
For an autosomal dominant disorder to be expressed just one copy of the abnormal allele must be inherited.For an autosomal recessive disorder to be expressed, two copies of the abnormal allele must be inheritedLearn more about autosomal genetic disorder below.
https://brainly.com/question/7978838
What type of intercellular junction bands together adjacent cells, making the epidermis stronger?.
Answer:
Tight or occluding junctions This type of junction is also called zonula occludens and is the most apical structure in the epithelial cell. Zonula occludens describes, that there is a formed band of tight junctions which encircles every cell.
Explanation:
Which lists three units of an organ system in order from the simplest to the most complex?
What are the two places in a cell where i could find dna?
Answer:
Cell nucleus and mitochondria
Explanation:
brainliest please
8. What is one way to cut your risk of developing cardiovascular disease?
Answer:
there are quite a few ways to limit your chances of developing cardiovascular disease, which i will list below
Explanation:
the chances of getting cardiovascular disease, also known as heart disease, can be limited by controlling your blood pressure, keeping your cholesterol levels under control, getting exercise, staying at a healthy weight and maintaining a healthy diet
hope this helps
Identify the independent variable in the experiment represented in Figure 3B. Justify the use of hair from individuals unaffected with FT as the control in the experiment represented in Figures 3A and 3B. Based on the data in Figure 3B, describe the FT effect of the disorder on the proportion of hairs in the growth phase. Based on Figure 2, if individuals 3 and 4 have another child, calculate the probability that the child will be affected
Based on the experimental data, the independent variable is the protein fibroblast growth factor-5, FGF5 which is unaffected by hair growth.
What is FT?Familial trichomegaly, FT, is a genetic disorder which results in abnormally long eyes in affected individuals.
FT is caused by a mutation in the genes that coded for the protein fibroblast growth factor-5, FGF5.
In research, the independent variable is unaffected by changes in another variable, butis changed and controlled by the researcher.
Based in the experiments, the independent variable is the protein fibroblast growth factor-5, FGF5.
Therefore, the independent variable is the protein fibroblast growth factor-5, FGF5 which is unaffected by hair growth.
Learn more about independent variable at: https://brainly.com/question/82796
How long does it take for grass seed to start growing.
Answer:
About 10-14 days :D
Explanation:
But it can take up to 30