compare violet and red light from the visible spectrum. you are currently in a labeling module. turn off browse mode or quick nav, tab to items, space or enter to pick up, tab to move, space or enter to drop. which has the longer wavelength? which has the greater frequency? which has the greater energy? answer bank

A wave crest arrives on the shore a median of every 10. zero seconds, so the frequency is 0. one hundred Hz. The average speed of the waves is 1.five m/s.

We are to decide the common pace of the waves.

Using the formula

v = fλ

Where

v is the speed

f is the frequency

and λ is the wavelength

From the given information

f = 0.1 Hz

λ = 15.0 m

∴ Speed of the wave = 0.1 × 15.0

Speed of the wave = 1.5 m/s

Average speed is defined as the total distance traveled by an object divided by the time taken to cover that distance. It is the measure of the average rate at which an object covers a certain distance in a given amount of time. Mathematically, the average speed is expressed as: Average speed = Total distance traveled / Time taken

It is important to note that average speed is not the same as instantaneous speed, which refers to the speed of an object at a particular instant in time. Average speed takes into consideration the entire adventure, while instant velocity only reflects the velocity at a unmarried moment. The unit of measurement for average speed is meters per second (m/s) or kilometers per hour (km/h), depending on the system of measurement used.

To know more about Average speed visit here:

brainly.com/question/12322912

#SPJ4

The principle that states that the buoyant force experienced by an object is exactly equal to the weight of the fluid displaced is known as Archimedes' Principle. What is Archimedes' Principle? Archimedes' Principle is a scientific law that explains how objects behave in fluids (liquids and gases).

The buoyant force of an object in a fluid is equal to the weight of the fluid displaced by the object according to this principle. This principle is valid for any fluid and any object as long as the buoyancy and weight of the object and fluid are calculated correctly.

The force that causes objects to float or sink in fluids is known as buoyancy. The buoyant force on an object is the net upward force exerted by the fluid in which the object is submerged.

When an object is immersed in a fluid, the fluid exerts an upward force on the object. This buoyant force opposes the weight of the object and causes it to float if the buoyant force is greater than the weight of the object.

To know more about buoyant force refer here:

https://brainly.com/question/21990136#

#SPJ11

The vertical speed of a segment of a horizontal taut string through which a sinusoidal, transverse wave is propagating depends on both the wave speed and the amplitude of the transverse wave.

The transverse wave and wave speed for vertical speed of a segment also depends on factors like:

        where 'A' is the amplitude of the transverse wave,

        'ω' is the angular frequency of the wave,

         't' is the time, and

        'cos' is the cosine function.

        where 'T' is the tension in the string and

         'u' is the mass per unit length of the string.

So while the wave speed does not directly determine the vertical speed of a segment of the string, it does affect the angular frequency of the wave (which is related to the wave speed) and thus indirectly affects the vertical speed of a segment of the string through the amplitude of the wave.

To learn more about the 'transverse wave':

https://brainly.com/question/2270715

#SPJ11

The distance between your eye and the image of the butterfly in the mirror is: the same as the distance between your eye and the actual butterfly

The distance between your eye and the image of the butterfly in the mirror is the same as the distance between your eye and the actual butterfly, which is the sum of the distance from your eye to the mirror and the distance from the mirror to the butterfly.

To calculate this, we need to measure the distance from your eye to the mirror, which can be done using a ruler or tape measure, and then measure the distance from the mirror to the butterfly, which can be done using a ruler or tape measure as well. Once we have these two measurements, we can simply add them together to get the total distance between your eye and the image of the butterfly in the mirror.

To clarify further, let's use an example. If your eye is 10 cm away from the mirror and the butterfly is 30 cm away from the mirror, then the total distance between your eye and the image of the butterfly in the mirror is 40 cm. This is because 10 cm (from your eye to the mirror) + 30 cm (from the mirror to the butterfly) = 40 cm.

To know more about distance refer here:

https://brainly.com/question/15172156#

#SPJ11

An electron and a proton are placed at rest in a uniform electric field of magnitude 498 N/C. The speed of electron and proton 44.4 ns after being released is -3.87 × 10⁶ m/s and 2.13 × 10³ m/s respectively.

Given data:

Electric field (E) = 498 N/C,

Time (t) = 44.4 ns = 44.4 × 10⁻⁹ s,

Mass of electron (m₁) = 9.11 × 10⁻³¹ kg,

Mass of proton (m₂) = 1.67 × 10⁻²⁷ kg.

Formula:

The acceleration produced in the electric field is given by a = qE/m, where q is the charge of the particle, E is the electric field strength, and m is the mass of the particle.

From the above formula, we can find the acceleration produced by the electric field on the electron and proton as follows:

For electron (q = -e, where e is the charge of an electron)

a₁ = qE/m₁ = -eE/m₁

= -1.6 × 10⁻¹⁹ × 498/9.11 × 10⁻³¹

= -8.73 × 10¹⁴ m/s²

For proton (q = +e, where e is the charge of an electron)

a₂ = qE/m₂ = eE/m₂

= 1.6 × 10⁻¹⁹ × 498/1.67 × 10⁻²⁷

= 4.80 × 10⁷ m/s²

Using the kinematic equation, v = u + at, where u is the initial velocity, we can find the speed of each particle 44.4 ns after being released as follows:

For electron,

v₁ = u₁ + a₁t = 0 + (-8.73 × 10¹⁴) × 44.4 × 10⁻⁹

= -3.87 × 10⁶ m/s

For proton,

v₂ = u₂ + a₂t = 0 + (4.80 × 10⁷) × 44.4 × 10⁻⁹

= 2.13 × 10³ m/s

Thus, the speed of the electron is -3.87 × 10⁶ m/s and the speed of the proton is 2.13 × 10³ m/s.

To know more about electric field, refer here:

https://brainly.com/question/15800304#

#SPJ4

According to the question the speed of the balls just before they collide is 1.81 m/s.

Collide is a term used to describe the process of two objects or particles coming into contact with each other, often resulting in a collision. In physics, the term is used to refer to the force of two objects impacting one another. In everyday language, the term is used to describe two things, such as people or ideas, coming together in a way that produces a powerful impact.

The initial energy of the system can be calculated as:
[tex]E_{initial[/tex] = m₁*g*h + 0
where m_1 is the mass of the upper ball (2.0 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the vertical distance between the two balls (12.0 cm).
The final energy of the system can be calculated as:
[tex]E_{final} = (m_1 + m_2)\times v^2[/tex]
where m_1 and m_2 are the masses of the two balls (2.0 kg and 3.0 kg, respectively), and v is the velocity of the lower ball when the two balls stick together.
From these equations, we can solve for v:
[tex]v = sqrt[(m_1\timesg\timesh)/(m_1 + m_2)] = sqrt[(2.0 kg\times9.8 m/s^2\times12.0 cm)/(2.0 kg + 3.0 kg)] = 1.81 m/s[/tex]
Therefore, the velocity of the lower ball when the two balls stick together is 1.81 m/s.

To learn more about collide
https://brainly.com/question/29312023
#SPJ1

Answer:

hdjsigosorodcdjjgjejfiroodofohov jdjvjwigioeofe

The amount of heat that left the system is 11.7 joules (given as a positive number).

When a piston is compressed fully with gas and 8.4 joules of work is done on it, and the internal energy (u) of the system is increased by 3.3 joules, we need to determine the amount of heat that left the system.

To determine the amount of heat that left the system, we need to use the First Law of Thermodynamics, which states that the change in internal energy (u) of a system is the sum of the heat (q) added to it and the work (w) done on it, which can be represented as:

u = q + w

Where, u = Change in internal energy of the system

q = Heat added to the system

w = Work done on the system

From the given information, w = -8.4 J (since work was done on the system), and u = 3.3 J.

Therefore, substituting these values in the above equation, we get:

3.3 J = q + (-8.4 J)3.3 J + 8.4 J

q = 11.7 J

For more question on heat click on

https://brainly.com/question/934320

#SPJ11

Answer:

igneous rock is produced when magma exits and cools above (or very near) the Earth's surface. These are the rocks that form at erupting volcanoes and oozing fissures.

In statistical mechanics, the partition function (denoted as Q) is a mathematical function that describes the distribution of energy among the possible microstates of a system in thermodynamic equilibrium. The partition function depends on the energy levels and degeneracies of the system, as well as on the temperature and other external parameters.

The Boltzmann factor (denoted as e^(-E/kT)) is a term that appears in the partition function and represents the probability of a system occupying a particular energy level. Here, E is the energy of the level, k is the Boltzmann constant, and T is the temperature of the system in Kelvin. The Boltzmann factor is derived from the Boltzmann distribution, which is a probability distribution that describes the occupation of energy levels in a system.

The Boltzmann factor can be used to estimate the probability of a system occupying a particular energy state by comparing the Boltzmann factors for different states. The ratio of the Boltzmann factors for two energy states gives the relative probability of the system occupying each state. For example, if the ratio of the Boltzmann factors for two energy levels is 10:1, then the system is 10 times more likely to occupy the lower energy level than the higher energy level at that temperature.

Overall, the partition function and the Boltzmann factor are fundamental concepts in statistical mechanics that allow us to describe the distribution of energy among the microstates of a system in thermal equilibrium and estimate the probability of the system occupying specific energy states.

For more question on thermodynamic click on

https://brainly.com/question/13059309

#SPJ11

The star might be quite large in size, with a much larger surface area than the sun. This would increase its luminosity despite its cooler temperature.

The star has a high luminosity (100,000 x the sun's) and a cool temperature (3500 K) because of its size.

A star's luminosity is proportional to its size, so if a star is very large, it can have a high luminosity even if it is relatively cool.

Another possibility is that the star is in a phase of its life cycle where it has expanded and cooled, such as a red giant or supergiant, but still retains a high luminosity due to its large size.

These stars have relatively low surface temperatures, but their large sizes give them very high luminosities.

Therefore, this star is likely very large and thus has a very high luminosity despite its low temperature.

Learn more about Luminosity and temperature here:

brainly.com/question/31014896

#SPJ11

The landing speed of the ball in the absence of air resistance would be 14 m/s.

The landing speed of an object in the absence of air resistance can be calculated by considering the conservation of energy.

The initial energy of the object will be equal to the final energy of the object when it reaches the ground.

A ball falling from a height h with an initial velocity u.

The gravitational potential energy of the ball is given by mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the ball.

The kinetic energy of the ball is given by 1/2 mu², where u is the initial velocity of the ball.

At the ground level, the gravitational potential energy of the ball will be zero, and the kinetic energy of the ball will be given by 1/2 mv², where v is the velocity of the ball when it reaches the ground.

mgh + 1/2 mu² = 1/2 mv²

Solving for v, we get:

v = sqrt(2gh + u²)

In the absence of air resistance, the ball will continue to fall with an acceleration of g. Therefore, we can assume that the initial velocity u is equal to zero. Thus, the equation reduces to:

v = sqrt(2gh)

g = 9.8 m/s², we can calculate the landing speed of the ball for a given height h. For example, if the ball is dropped from a height of 10 meters, then the landing speed of the ball will be:

v = sqrt(2gh) = sqrt(2*9.8*10) = 14 m/s

Therefore, the landing speed of the ball in the absence of air resistance would be 14 m/s.

to know more about resistance refer here:

https://brainly.com/question/30799966#

#SPJ11

Answer : If an object falls freely from rest on a planet where the acceleration due to gravity is 20 m/s2 then after 5 seconds, the object will have a speed of  100 m/s

This can be calculated using the equation v = a*t, where v is the velocity, a is the acceleration due to gravity, and t is the time elapsed. Therefore, in this case, v = 20 m/s2 * 5 s = 100 m/s.  These values are given in question, so we just have to put them in equation.

Since the object is falling freely, its acceleration remains constant and it follows a uniform acceleration motion. Therefore, the velocity of the object will increase linearly with time. After 10 seconds, the velocity will double to 200 m/s, and so on.

Know more about gravity here:

https://brainly.com/question/14874038

#SPJ11

The possible direction in which an electromagnetic wave is traveling if the electric field is oscillating along the z-axis and the magnetic field is oscillating along the x-axis is the y-axis.

An electromagnetic wave is composed of two mutually perpendicular fields that oscillate perpendicular to the direction of the wave's propagation. They are the electric field and the magnetic field. An electromagnetic wave is created when a charged particle is accelerated. These waves can travel through a vacuum or any medium, including air and water, at the speed of light.

In this scenario, the electric field of the wave oscillates along the z-axis, while the magnetic field oscillates along the x-axis. As a result, the wave's propagation direction must be perpendicular to both fields. As a result, the wave must be propagating along the y-axis.This is why it's critical to comprehend the interplay between electric and magnetic fields in the context of electromagnetic waves.

It's also critical to recognize that an electromagnetic wave's direction of propagation is always perpendicular to the oscillation directions of the two fields, which are mutually perpendicular to each other.

for such more question on electromagnetic wave

https://brainly.com/question/24319848

#SPJ11

The answer is that the radio waves will arrive first at the Earth when a star emits red light, blue light, x-rays, and radio waves.

This is due to the fact that radio waves are long-wavelength electromagnetic radiation. As a result, they are less likely to be impeded or absorbed by the intervening space medium, and they can propagate without being affected by any other disturbances in the cosmos.

Furthermore, radio waves are not influenced by the earth's atmosphere, which is responsible for interfering with the passage of light rays to the surface of the earth. In other words, radio waves can traverse enormous distances in space without being obstructed or attenuated by any physical barrier.

Light rays, on the other hand, propagate via a straight line, which is known as the line of sight. Light rays may be deflected or absorbed by cosmic dust, gas clouds, or other materials found in interstellar space. This may cause them to travel in different directions, which might cause them to be redirected from their initial path. As a result, light rays must contend with these obstacles before reaching the earth, which may cause them to be weakened or distorted by the time they arrive.

Similarly, X-rays are also electromagnetic radiation but they are absorbed by interstellar matter. They are also affected by magnetic fields, and they might be redirected from their path as a result of the interstellar medium. This might cause them to be slowed down and travel a longer distance, making their journey longer.

Thus, radio waves will arrive first because of their long wavelength and low interaction with cosmic matter.

To know more about radio waves, refer here:

https://brainly.com/question/28874040#

#SPJ11

Yes, when a light ray enters from water to air, it will bend further from the normal. This phenomenon is known as refraction, and is caused by the difference in speed between light passing through the two different materials. The light ray will slow down when passing through water, so it will bend closer to the normal.

When a light ray enters the air from water, the light ray will refract closer to the normal. This is due to the fact that light travels faster through air than through water, so when the light enters the air, it bends towards the normal. The amount of refraction is determined by the index of refraction of each material. Since the index of refraction of air is lower than the index of refraction of water, the light ray will bend closer to the normal.

To better understand this, imagine a light ray traveling from a denser material (like water) to a less dense material (like air). As the light ray enters the air, the speed of the light increases, causing it to bend closer to the normal. This is due to the law of refraction, which states that the angle of refraction is inversely proportional to the speed of the light ray. In summary, when a light ray enters the air from water, it will refract closer to the normal. This is due to the fact that light travels faster through air than through water, so the light ray bends towards the normal. The amount of refraction is determined by the index of refraction of each material, with the lower index refraction material (air) resulting in the light ray bending closer to the normal.

For more questions related to refraction.

https://brainly.com/question/14760207

#SPJ11

The speed acquired by the body is 49m/s and 59m/s respectively.

The speed can be calculated using the formula:

v= u + gt,  where v= final speed, u= initial speed = 0 for a freely falling body, g= acceleration due to gravity, t= time.

The speed acquired by a freely falling object 5 seconds after being dropped from a rest position is 49 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 5 seconds it will be moving at a speed of 5 * 9.8 = 49 m/s.

The speed 6 seconds after being dropped from a rest position is approximately 59 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 6 seconds it will be moving at a speed of 6 * 9.8 = 58.8 m/s.

In summary, the speed of an object dropped from rest 5 seconds after being dropped is 49 m/s, and 6 seconds after it is approximately 59 m/s.

To know more about speed, refer here:

https://brainly.com/question/17661499#

#SPJ11

The direction the automobile should move to generate the maximum motional emf in the antenna, with the top of the antenna positive relative to the bottom towards the east.

A magnetic field is an area surrounding a magnet or an electric current, characterized by the presence of a force that can attract or repel other magnetic materials. The concept of magnetic fields is significant in a variety of contexts, including electromagnetism, particle physics, and ferromagnetism.

According to Faraday's Law of Electromagnetic Induction, the emf generated in a conducting wire moving in a magnetic field is proportional to the strength of the magnetic field and the velocity of the conductor.

The magnitude of the emf is given by ε = Blv sinθ, where

- ε is the magnitude of the induced emf,

- B is the magnetic field strength,

- l is the length of the wire in the magnetic field,

- v is the speed of the conductor relative to the magnetic field, and

- θ is the angle between the velocity vector and the magnetic field vector.

Due to the given conditions in the question, we can use the above formula for calculating the maximum emf. To generate the maximum motional emf in the antenna, the automobile should move in a direction perpendicular to both the antenna and the Earth's magnetic field. The angle between the velocity vector and the magnetic field vector should be 90°.

1: Identify the direction of the magnetic field. In this case, the magnetic field is directed toward the north and downward at an angle of 65.0° below the horizontal.

2: Determine the direction perpendicular to both the antenna and the magnetic field. This can be done by using the right-hand rule. Point your right thumb in the direction of the magnetic field (north and downward at 65.0° below the horizontal) and your right index finger in the direction of the antenna (vertical). Your right middle finger will then point in the direction of the motion required to generate the maximum emf (perpendicular to both the magnetic field and the antenna).

The direction the automobile should move to generate the maximum motional emf in the antenna, with the top of the antenna positive relative to the bottom, is to the east.

Learn more about emf here:

https://brainly.com/question/17329842

#SPJ11

The amount of heat lost through a 3' x 5' single-pane window with a storm that is exposed to a temperature differential is 108 BTU per hour.

The U-factor is a measure of how well a window insulates against heat transfer. The lower the U-factor, the better the window insulates.

Using these factors, we can calculate the rate of heat loss through the window in units of BTUs per hour.

Assuming a U-factor of 1.2 and a temperature difference of 60°F, the calculation would be:

Heat Loss = 1.2 BTU/(hrft^2F) x 15 ft^2 x 60°F

Heat Loss = 108 BTU/hour

Therefore, the heat lost through the window is 108 BTU per hour.

To know more about heat loss click here:

https://brainly.com/question/14228650

#SPJ11

Complete Question:

How much heat is lost through a 3' × 5' single-pane window with a storm that is exposed to a 60 Fahrenheit temperature differential?

The velocity of the stone after 3 seconds have passed can be calculated using the formula v=u + at, where v is the velocity, u is the initial velocity, a is the acceleration (in this case the acceleration due to gravity, which is 9.8 m/s2), and t is the time. Therefore, the velocity of the stone after 3 seconds have passed will be 5.6 + (9.8*3) = 23.4 m/s.

The acceleration due to gravity causes any object to accelerate as it moves. This acceleration is always constant and acts downwards. Therefore, an object thrown with an initial velocity of 5.6 m/s will continue to accelerate and its velocity will increase. After 3 seconds have passed, the object will have an increased velocity of 23.4 m/s. In addition, when the stone is thrown off the bridge, it is subject to air resistance, which works against the stone and causes it to slow down. The magnitude of air resistance is dependent on a number of factors, such as the shape and size of the object. As such, the stone's velocity after 3 seconds might be slightly lower than the calculated value of 23.4 m/s.

Know more about velocity here:

https://brainly.com/question/29523095

#SPJ11

The Norton's equivalent circuit and equivalent resistance of the given circuit is leq = 2.5 A, Req = 2 ohms. The correct answer is option b.

Norton's equivalent current, iNorton is calculated by dividing the voltage source by the series resistance of R2 and R3.

iNorton = V1 / (R2 + R3)

iNorton = 10 / (8 + 8)

iNorton = 0.625 A

Norton's equivalent resistance, RNorton is calculated by using the formula;

RNorton = R2 || R3

RNorton = (R2 x R3) / (R2 + R3)

RNorton = (8 x 8) / (8 + 8)RNorton = 4 ohms

Therefore, Norton's equivalent circuit is given by the current source of 0.625 A and the resistance of 4 ohms, connected across terminals a and b. The correct answer is option B; leq = 2.5 A, Req = 2 ohms.

To know more about equivalent resistance click here:

https://brainly.com/question/12286223

#SPJ11

The amount of force that the pitcher applies to the baseball is 11.6N.

Force is a physical quantity that denotes ability to push, pull, twist or accelerate a body. It can be calculated by multiplying the mass of the object by its acceleration as follows;

Force = mass × acceleration

According to this question, a baseball has a mass of 145 g. A pitcher throws the baseball so that it accelerates at a rate of 80 m/s². The force applied on the baseball can be calculated as follows:

Force = 145/1000 kg × 80m/s²

Force = 11.6N

Learn more about force at: https://brainly.com/question/25116504

#SPJ1

For a rocket launched southward from Boulder, the Coriolis effect would cause it to drift to the east, leading to a curved flight path rather than a straight one.

The Coriolis effect is an important force to consider when launching a research rocket from Boulder. The Coriolis effect is the result of Earth's rotation and will cause any object moving along the surface of the Earth to veer to the right in the Northern hemisphere and to the left in the Southern hemisphere.

This effect is most noticeable for objects traveling long distances, such as a rocket. As it continues to fly south, the Coriolis force will continue to act upon it, increasing the curvature of its path. The magnitude of the Coriolis force depends on the speed of the object and its distance from the poles. Therefore, the more time the rocket has to travel, the more it will be deflected from its intended path.

The Coriolis effect is an important factor to consider for any research rocket launch. It has the potential to affect the accuracy and success of the mission and must be taken into account when planning a launch trajectory.

For more such questions on Coriolis effect.

https://brainly.com/question/14290551#

#SPJ11

Complete Question:

A research rocket is launched from Boulder straight towards the south. How would the Coriolis effect change the path of the rocket?

The component vr of velocity vector v along the radial direction from the radar gun to the car is the component of the velocity that is in the direction of the radial line that connects the radar gun to the car.

It can be calculated by taking the dot product of the velocity vector and the unit vector of the radial line.

The unit vector of the radial line is a vector that has a magnitude of one and that is pointing in the direction of the radial line.

The dot product of two vectors is equal to the magnitude of the first vector multiplied by the projection of the second vector on the first vector.

Thus, the component of velocity vr along the radial line is calculated by taking the magnitude of v multiplied by the projection of the unit vector of the radial line on v.

The component vr can be used to determine the speed of the car from the radar gun. The speed of the car is equal to the magnitude of vr divided by the speed of light.

By knowing the speed of the car, the speed limit can be compared to it in order to determine if the car is driving at a legal speed.

to know more about vector refer here:

https://brainly.com/question/24256726#

#SPJ11

To change 500g of water at room temperature (20°C) to steam at 100°C, you will need to add 1128.500 kJ of heat. This is because water requires a certain amount of heat energy, called the 'latent heat of vaporization', to turn from a liquid to a gas.

Mass of water (m) = 500g

Initial temperature ([tex]T_i[/tex]) = 20°C

Final temperature ([tex]T_f[/tex]) = 100°C

The heat of vaporization ([tex]H_{vap}[/tex]) = 2260 J/g.

To calculate the amount of heat required to convert 500 g of water at room temperature to steam at 100°C, we will use the formula:

[tex]Q = m \times H_{vap}\\Q = 500 g \times 2260 J/g\\Q = 1128500 J[/tex]

Therefore, it would take 1130000 J of heat to change this water to steam at 100°C.

For further detail on latent heat of vaporization, click on the below link:

https://brainly.com/question/30762921

#SPJ11

The new volume is approximately 23.16 L when the nitrogen gas is compressed from 748 mmHg to 725 mmHg at constant temperature.

Use the combined gas law to determine the relationship between a gas's pressure, volume, and temperature:

P1V1/T1 = P2V2/T2

where the gas's starting pressure, volume, and temperature are P1, V1, and T1, and its ultimate pressure, volume, and temperature are P2, V2, and T2.

The equation may be made simpler by saying: since the temperature is constant.

P1V1 = P2V2

Substituting the given values, we get:

725 mmHg × V2 = 748 mmHg × 22.5 L

Solving for V2, we get:

V2 = (748 mmHg × 22.5 L) / 725 mmHg

V2 = 23.16 L

A gas law known as the combined gas law connects a gas's pressure (P), volume (V), and temperature (T). It combines Boyle's law, Charles' law, and Gay-law, Lussac's three additional gas laws.

Learn more about Volume here:

https://brainly.com/question/18090062

#SPJ1

The force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s is 7000 N in the opposite direction to the car's motion.

Calculate the force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s.

To solve the given problem, we can use the equation:

F = (m * Δv) / Δt

where F = force

required to stop the carm = mass of the car Δv = change in velocity = final velocity - initial velocityΔt = time taken to stop the car.

Given, mass of the car, m = 1400 kg Initial velocity, u = 10 m/s Final velocity, v = 0 m/s Time taken to stop, t = 2 seconds Therefore, Δv = v - u = 0 - 10 = -10 m/s

Substituting the given values in the above equation, we get:

F = (m * Δv) / Δt = (1400 kg * (-10 m/s)) / (2 s) = -7000 N

Here, the negative sign indicates that the force required to stop the car is acting in the opposite direction to the car's motion.

for such more question on force

https://brainly.com/question/12785175

#SPJ11

The magnitude of the induced emf by the coil is  -0.63 V.

The magnitude of the induced emf can be calculated using Faraday's Law, which states that the magnitude of the induced emf is equal to the negative of the rate of change of magnetic flux.

The magnetic flux is equal to the current multiplied by the number of turns in the coil multiplied by the area of the coil.

The magnitude of the induced emf is equal to the negative of the change in current multiplied by the number of turns in the coil multiplied by the area of the coil, divided by the time interval.

The magnitude of the induced emf is equal to the negative of (22.0 A - 12.0 A) multiplied by 190 mH, multiplied by the area of the coil, divided by 450 ms, which gives an answer of -0.63 V.

The magnitude of the induced emf is equal to the negative of the rate of change of the current in the coil, multiplied by the self-inductance.

Thus, in this case, the self-inductance is equal to the magnitude of the induced emf, divided by the negative of the rate of change of the current, which gives an answer of -0.63 V.

to know more about induced emf refer here

https://brainly.com/question/16764848#

#SPJ11

The speed of the proton can be calculated as:v = p/m = (1.08 × 10⁻¹⁸ kg m/s)/(1.67 × 10⁻²⁷ kg) = 6.46 × 10⁸ m/s. So, the speed of the proton at 10 MeV is 6.46 × 10⁸ m/s.

Relationship between energy in joules versus eV. The relationship between energy in joules and electron volts (eV) is defined by the conversion factor 1 eV = 1.6 × 10⁻¹⁹ joules. This factor is used to convert energy measurements from one unit to the other. If a proton has an energy of 10 MeV, we can use this conversion factor to determine its energy in joules.10 MeV = 10 × 10⁶ eV = 1.6 × 10⁻¹⁹ J/eV × 10 × 10⁶ eV = 1.6 × 10⁻¹³ J. Speed of a proton at 10 MeV.

The speed of a proton at 10 MeV can be calculated using the relativistic equation: E² = (mc²)² + (pc)², where E is the energy of the proton, m is its mass, c is the speed of light, and p is the momentum of the proton. Let's assume that the mass of the proton is 1.67 × 10⁻²⁷ kg. Then, the momentum of the proton can be calculated as follows:p = √(E² - (mc²)²)/c = √((10 × 10⁶ eV)² - (1.67 × 10⁻²⁷ kg × (2.998 × 10⁸ m/s)²)²)/2.998 × 10⁸ m/s = 1.08 × 10⁻¹⁸ kg m/s. The speed of the proton can be calculated as:v = p/m = (1.08 × 10⁻¹⁸ kg m/s)/(1.67 × 10⁻²⁷ kg) = 6.46 × 10⁸ m/s. Therefore, the answer is 10 MeV is 6.46 × 10⁸ m/s.

Learn more about proton : https://brainly.com/question/1805828

#SPJ11

The kinetic energy of the cat is 177.15 Joules.

The kinetic energy of the cat can be calculated using the formula K = 0.5mv2, where m is the mass and v is the velocity.

The cat has a mass of 4.50 kg and is running at a velocity of 6.70 m/s, so we can substitute these values into the formula to find the kinetic energy:

K = 0.5 * 4.50 kg * (6.70 m/s)2

K = 177.15 Joules

Kinetic energy is the energy possessed by an object due to its motion. It is calculated by multiplying half of the object's mass by its velocity squared.

The cat has a mass of 4.50 kg and is running at a velocity of 6.70 m/s, so its kinetic energy is 177.15 Joules.

to know more about kinetic energy refer here:

https://brainly.com/question/26472013#

#SPJ11