Consider a box sliding down horizontally across a straight line. Which of the following factors affects the amount of work done against friction in this situation?
A. Speed of the box
B. Time taken to move the box
C. Distance the box is moved
D. Direction of the box is moved​

Answer:

The total displacement of the object is 20 m

Explanation:

Velocity vs Time Graph

It shows the behavior of the velocity as time increases. If the velocity increases, then the acceleration is positive, if the velocity decreases, the acceleration is negative, and if the velocity is constant, then the acceleration is zero.

The distance covered by the car can be calculated as the area behind the graph.

The total area can be calculated in two parts: One triangle from t=0 sec to t=2 sec, and one rectangle from t=2 sec to t=3 sec.

The area of a triangle is

A1= B*H/2, where B is the length of the base, and H is the length of the Height. The base is B=2 seconds, and the height is H = 10 m/s, thus:

A1= (2 sec)*(10 m/sec)/2=10 m

The area of a rectangle is

A2=W*L, where W is the width, L is the length. W=1 sec, L=10 m/s, thus:

A2=(1 sec)*(10 m/sec) = 10 m

Total displacement= 10 m + 10 m = 20 m

The total displacement of the object is 20 m

Answer:

4x10=30

Explanation:

You can easily know it's multiplication when you see the sign. It gives you the number but you have to plug it in. So once you plug in the numbers then you should get either 4x10 or 10x4 which means both is equal to 40

Answer:

Probably not my guy

Explanation:

Answer:

[tex]29861.23\ \text{m/s}[/tex]

Explanation:

[tex]R=\text{Radius of Earth's orbit}=1.5\times10^{11}\ \text{m}[/tex]

[tex]T=\text{Time taken by the Earth to complete the orbit}=365.3\ \text{days}[/tex]

Assuming the orbit is of circular shape the distance the Earth has to travel is the circumference

[tex]C=2\pi R\\\Rightarrow C=2\pi\times 1.5\times10^{11}\\\Rightarrow C=942477796076.938\ \text{m}[/tex]

Velocity is given by

[tex]v=\dfrac{C}{T}\\\Rightarrow v=\dfrac{942477796076.938}{365.3\times 24\times 60\times 60}\\\Rightarrow v=29861.23\ \text{m/s}[/tex]

The speed of the Earth around the Sun is [tex]29861.23\ \text{m/s}[/tex]

Speed can be represented by many different units of distance and time.

The speed of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity.

Speed is defined as distance per unit time so it's unit are meter per sec, kilo-meter per hour, that is different unit of distance and time.

Speed can be represented by many different units of distance and time.

To learn more about speed refer to the link:

brainly.com/question/28224010

 #SPJ2

Answer:

The forces acting on a skydiver jumping from a plane include the gravitational force and air resistance

Explanation: i, dumb so this is proabaly wrong

Answer:

the main character

Explanation:

i think

Explanation:

Acceleration is final velocity minus initial velocity divided by time.

a = (v − u) / t

a = (27 m/s − 5 m/s) / 10 s

a = 2.2 m/s²

Answer:

1.) 347,000,000

2.)7,940

3.)0.00196

4.)4,500,000,000

5.)0.00000961

6.)102,000

7.).000000000701

8.)44.4

Explanation:

when the power is positive, you just need to move decimal point to your right , for a number of times which is similar to the value of the power.

Eg. 3.47×10 raised to the power 8.

with this, move the decimal point to the right eight times which will be 347,000,000.

But when the power is negative, move the decimal point to the left for a number times which will be similar to the value of the power.

Eg. 1.96×10 raised to the power negative 3.

move the decimal point leftwards three times which will be 0.00196

Please mark as brainliest.

Answer:

[tex]a = 7.69\: {m(s)}^{ - 2} [/tex]

Explanation:

[tex]f = ma \\ a = \frac{f}{m} = \frac{500}{65} = \frac{100}{13} \\ a = 7.6923076923 \: {m(s)}^{ - 2} [/tex]

Answer:

Noble gases are nonreactive elements.

Explanation:

We call Group 18 of the Periodic Table "Noble gases" because they are inert gases. They do not like to bond with other elements.

The reason why is because their outermost shell for electrons is full. These electrons, called valence electrons, are are completely maxed out and therefore makes the element stable. This in turn makes it so that it doesn't really bond with other elements.

Answer:

Yes. Noble gases ARE nonreactive elements.

Explanation:

Answer:If the masses are different, the lighter ice skater will accelerate faster than the ice skater with more mass.

Explanation:

The lighter skater will accelerate more quickly than the heavier skater if there are mass discrepancies.

According to Newton's third law, the action and reaction forces in any force interaction must be equal and moving in the opposite directions. These pressures, nevertheless, affect a variety of items. In this case, each skater will experience the same amount of force, and if any other horizontal forces, such as friction, operating on each skater in the opposite direction from the pushing force are less than the pushing force, each will accelerate in that direction. The two skater system's center of mass will remain where it is if there is little to no friction to prevent the skaters from moving.

To know more about Friction visit-

https://brainly.com/question/13000653

#SPJ2

Answer:

Balance scale would be the answer

Answer:

The basic SI unit of mass is the kilogram (kg). In physics, mass is not the same as weight, even though mass is often determined by measuring the object's weight using a spring scale, rather than balance scale comparing it directly with known masses.

Balanced Scale

Answer:

Because they are in places that may be extremely cold

Explanation:

For example take Mount Everest. This place is a very high mountain, and is very cold. Usually hikers would get a frost bite from how cold it is in there. According to google, "Frostbite is an injury caused by freezing of the skin and underlying tissues."

Answer:

C

i just took the test!

Answer:

Solids have definite shapes, and liquids fill their containers.

Explanation:

The ACTUAL answer

Answer:

v?

Explanation:

v = ∆s / ∆t

v =?

∆s = 236 - 218 = 18km

=t = 10: 30 - 10:15 = 15 minutes to hour 15/60 = 0.25h

v = 18 / 0.25

v = 72km / h

speed of 72km / h

Answer:

6180

Explanation:

if he is riding at 10.3 meters per second, and is riding for 10 minuets you multiply 10.3 by 60 for 1 minuet and get 618. Then multiply 618 by 10 for 10 minuets and you get 6180

Answer:

618 of 103

Explanation:

If you do 10.3 x 60 you will get 618

If you do 10.3 x 10 you will get 103

Answer:

The question of analog vs. digital audio is one of the more hotly debated questions in the world of music, film and media today. Does digital sound better? Does analog sound better? Is there even a noticeable difference?

It’s impossible to understand the difference completely without understanding what distinguishes analog audio from digital audio. A full discussion of these terms is best left to your curriculum and discussions with your mentor in the studio. For now, though, here’s a brief explanation of what these two words mean, and the differences between them.

Analog refers to a continuously changing representation of a continuously variable quantity. Digital, however, refers to representing these variable quantities in terms of actual numbers, or digits. The last two sentences seem a bit complex, but let’s try to simplify them with an example. If you consider the numbers 1 and 2 on a number line, there are actually an infinite number of points between 1 and 2. This is what analog represents—the infinite number of possibilities between 1 and 2. Digital, on the other hand, only looks at certain number of fixed points along the line between 1 and 2 (for example, 1 ¼, 1 ½, 1 ¾, and 2).

Can you see the difference? Digital takes a few “snapshots” of the number line, while analog takes the whole line into account.

As another example, think of analog vs. digital as the difference between seeing something in real life and watching it on film. When we see something happen in real life, there are no “spaces” between what we see, so we’re watching it happen in analog. Film, however, is actually a series of still photographs that are taken in rapid-fire intervals, and when we see them in succession, it tricks our minds into thinking we’re seeing a continuous flow of movement. So in a manner of speaking, when we watch the event happen on film, we’re watching it digitally, because we’re watching increments of the event, rather than the whole thing in fluid motion. (Not to be confused with digital video vs. film, which is another discussion completely!)

Let’s bring this idea into audio, music, and the studio. Sound occurs naturally in analog–that is to say, sound occurs in a continuous set of waves that we hear with the human ear. (Think of it as a “wavy” line with an infinite number of points along it.) When we capture that sound in a way that represents all the possible frequencies, we’re recording in analog; when we use computers to translate the sound into a series of numbers that approximate what we’re hearing, we’re recording in digital.

Thus, a purely analog recording would be something that was recorded on tape and produced using manual equipment to mix, master and press into a vinyl LP. A purely digital recording would be recorded on a computer program such as Pro Tools, mixed, mastered and produced digitally, and eventually burned onto a CD as an MP3 or audio file.

The most ironic aspect of the debate about digital vs. analog recording is that nowadays a lot of music is a combination of the two.  For example, you might record a song onto analog tape, but mix and master it digitally, or release it on the Internet as an MP3.

So what’s the difference in quality between analog and digital? The idea between digital recording is that our ears and brains technically can’t determine the spaces between the digital values, just like our brains interpret film as continuous motion. However, to many people, analog sound tends to be warmer, has more texture and is thought to capture a truer representation of the actual sound. Digital is felt to be somewhat cold, technical and perhaps lacking in analog’s nuance.

However digital is much cheaper. Recording an album with analog technology can require a whole studio full of equipment, but with digital recording technology, it’s possible to record a whole album in a bedroom on a laptop. And whereas analog technology can wear out or be damaged, digital media can last for an indefinite length of time.

Today many recording artists, both major and independent, record using a mixture of digital and analog techniques. While analog audio does give warmth and a truer sound quality, digital is cheaper to work with and offers more control over the finished product.

Answer:

your getting in the water causes it to make a giant wave

Explanation:

Answer:

Tin fork and knife.....Copper coin...steel pole

Explanation:

Malleable objects are those which could be shaped with out breaking or could be turned into wires. Tin fork and knife could be bent so it is malleable, copper could be turned into wires so it is also malleable. Most of the metals are malleable. Mild Steel is used in making poles and pipes which is malleable

Answer:

A C F or tin fork and knife from camping set

steel pole fence post

copper coin

Explanation:

I got it right on edg

                                                    hope it helps :)

Answer:

the answer is 6e+79

Answer:

yea the answer is 6e+79 i did use a couculater though

Explanation:

Answer:

god correct correct

Explanation:

Answer:

It helps planet earth to survive

Explanation:

Although much less abundant than nitrogen and oxygen in Earth's atmosphere, carbon dioxide is an important constituent of our planet's air. A molecule of carbon dioxide (CO 2) is made up of one carbon atom and two oxygen atoms. Carbon dioxide is an important greenhouse gas that helps to trap heat in our atmosphere.

The Rock cycle is a model that describes the formation degradation, and regeneration of rocks as a result of sedimentation magma, and metamorphism. All rocks are made of minerals.

Rock circulation is the process by which rocks change continuously between three types igneous sedimentary and metamorphic. The three processes that transform one rock into another are crystallization, metamorphism erosion, and sedimentation. Any rock can be transformed into another rock by undergoing one or more of these processes. This creates a lock cycle.

Rock circulation is a fundamental concept that describes the transition between three rock types metamorphic igneous, and sedimentary rocks. Simply put it is a set of processes that create and transform rock types within the Earth's crust. Rock cycling by definition is the natural process by which sedimentary igneous, and metamorphic rocks are formed, transformed from one type to another, and destroyed.

Learn more about The Rock cycle here:-https://brainly.com/question/12863450

#SPJ1

Answer:

51m/s^1

Explanation:

v=u+at

v=(6)+(3)(15)

v=51m/s^1

Answer: Explanation:

Blastocyst, a distinctive stage of a mammalian embryo. It is a form of blastula that develops from a berrylike cluster of cells, the morula. A cavity appears in the morula between the cells of the inner cell mass and the enveloping layer.

Answer:

No; the graph fails the vertical line test.

The vertical line test is a tool used to determine if we have a function. If we can draw a single straight vertical line through more than one point on the red curve, then the graph is said to have failed the vertical line test. Consequently, this leads to the relation not being a function.

For this circle graph, we can draw a vertical line through more than one point, which is why we don't have a function here.

Put another way, there are inputs (x) that produce more than one output (y), so that's why we don't have a function.

-BBBM