Breaking a cement block with a bare hand requires a combination of physical phenomena, including the transfer of momentum, the properties of the cement block, and the human body's ability to withstand and generate force.
During the collision between the karate expert's hand and the cement block, several physical phenomena occur. The first one is related to the transfer of momentum between the hand and the block. When the hand makes contact with the block, it exerts a force on it, and according to Newton's third law of motion, the block exerts an equal and opposite force on the hand. This force causes the hand to slow down and the block to accelerate in the opposite direction. The momentum of the hand is transferred to the block, increasing its velocity and ultimately causing it to break.
The second physical phenomenon that occurs during the collision is related to the properties of the cement block itself. Cement blocks are made of concrete, which is a composite material consisting of cement, sand, and gravel. When the karate expert's hand strikes the block, the force causes the cement particles to fracture and break apart. The sand and gravel particles are also displaced, causing the block to crumble.
The third physical phenomenon is related to the human body's ability to withstand and generate force. Karate experts undergo years of training to develop the necessary strength, speed, and technique to perform such feats. During the execution of the swift blow, the expert's muscles contract, generating a force that is transmitted through the bones and joints of the hand. This force is concentrated on a small area of the hand, allowing it to break the block.
To know more about cement block visit:-
https://brainly.com/question/22526797
#SPJ11
a truck of mass 4000 kg is at rest, but free to roll with no resistance. if you push it forward with a force of 500 n, the momentum at the end of 5 s of pushing will be
The momentum of an object is given by the equation:
Momentum = Mass × Velocity
In this case, the truck is initially at rest, so its velocity is zero. When a force is applied, the truck starts accelerating. The net force acting on the truck can be determined using Newton's second law:
Force = Mass × Acceleration
Since the truck is rolling with no resistance, there is no opposing force to its motion. Therefore, the applied force will result in the acceleration of the truck. Using Newton's second law, we can rearrange the equation to find the acceleration:
Acceleration = Force / Mass
Plugging in the values:
Acceleration = 500 N / 4000 kg = 0.125 m/s²
To find the final velocity of the truck after 5 seconds of pushing, we can use the kinematic equation:
Final Velocity = Initial Velocity + (Acceleration × Time)
Since the truck starts from rest, the initial velocity is zero. Plugging in the values:
Final Velocity = 0 + (0.125 m/s² × 5 s) = 0.625 m/s
Now, we can calculate the momentum at the end of 5 seconds using the equation for momentum:
Momentum = Mass × Velocity
Momentum = 4000 kg × 0.625 m/s = 2500 kg·m/s
Therefore, the momentum of the truck at the end of 5 seconds of pushing will be 2500 kg·m/s.
To know more about momentum, click here https://brainly.com/question/30677308
#SPJ11
Jack and Jill ran up the hill at 2.8 m/s . The horizontal component of Jill's velocity vector was 2.2 m/s .
The question statement provides information about the velocities of Jack and Jill as they ran up the hill. Jack and Jill both had a velocity of 2.8 m/s, but the horizontal component of Jill's velocity vector was 2.2 m/s.
we can use vector addition to determine Jill's total velocity vector. We can break Jill's velocity vector into its horizontal and vertical components. The vertical component is equal to Jack's velocity of 2.8 m/s, since both Jack and Jill are running up the hill. The horizontal component is given as 2.2 m/s. Using the Pythagorean theorem, we can find the magnitude of Jill's velocity vector: |V_jill| = sqrt((2.8 m/s)^2 + (2.2 m/s)^2) = 3.6 m/s
Therefore, the long answer to the question is that Jill's total velocity vector was 3.6 m/s, with a vertical component of 2.8 m/s and a horizontal component of 2.2 m/s. To determine the vertical component of Jill's velocity vector while running up the hill at 2.8 m/s with a horizontal component of 2.2 m/s, follow these steps: Recall that the velocity vector has two components: horizontal and vertical. Recognize that the total velocity vector (2.8 m/s) can be represented as the hypotenuse of a right triangle, with horizontal (2.2 m/s) and vertical components as its legs. Calculate and find the vertical component:vertical component = √(2.8^2 - 2.2^2) ≈ 1.6 m/s In summary, the vertical component of Jill's velocity vector while running up the hill is approximately 1.6 m/s.
To know more about velocity visit:
https://brainly.in/question/11504533
#SPJ11
The vertical component of Jill's velocity vector is 1.6 m/s.
To find the vertical component of Jill's velocity vector, we can use the Pythagorean theorem since the horizontal and vertical components form a right triangle with the overall velocity vector.
The theorem states that the square of the hypotenuse (the overall velocity, 2.8 m/s) is equal to the sum of the squares of the other two sides (the horizontal and vertical components).
Let's represent the vertical component as "Vv". So, we have:
2.8² = 2.2² + Vv²
7.84 = 4.84 + Vv²
Vv² = 7.84 - 4.84
Vv² = 3
Vv = √3
Vv ≈ 1.6 m/s
Summary: When Jack and Jill ran up the hill at 2.8 m/s, the horizontal component of Jill's velocity vector was 2.2 m/s, and the vertical component was approximately 1.6 m/s.
Learn more about Pythagorean theorem click here:
https://brainly.com/question/343682
#SPJ11
A block oscillating on a spring has an amplitude of 20 cm.
What will the block's amplitude have to be if its total energy were somehow doubled? Assume the block is still attached to the same spring.
If the total energy of the block on a spring is doubled, the amplitude will also double. Therefore, if the initial amplitude is 20 cm, the new amplitude will be 40 cm.
When a block oscillates on a spring, its amplitude is related to its total energy. Doubling the total energy will affect the amplitude of the oscillation.
The total energy of an oscillating block on a spring is given by the formula:
[tex]\text{Total Energy} = \frac{1}{2} k A^2[/tex]
Where:
k is the spring constant, and
A is the amplitude of the oscillation.
To find the new amplitude, we can rearrange the formula as follows:
[tex]A = \sqrt{\frac{2 \cdot \text{Total Energy}}{k}}[/tex]
If the total energy is doubled, the new total energy will be 2 times the initial total energy. Let's denote the new amplitude as A'.
Then we have:
[tex]A' = \sqrt{\frac{2 \cdot 2 \cdot \text{Total Energy}}{k}}[/tex]
[tex]A' = \sqrt{\frac{4 \cdot \text{Total Energy}}{k}}[/tex]
[tex]A' = 2 \cdot \sqrt{\frac{\text{Total Energy}}{k}}[/tex]
Therefore, if the total energy of the block is doubled, the new amplitude (A') will be twice the initial amplitude (A).
In this case, if the initial amplitude is 20 cm, the new amplitude will be:
A' = 2 * 20 cm
= 40 cm
So, the block's amplitude will have to be 40 cm if its total energy is doubled while still attached to the same spring.
To know more about the oscillation refer here :
https://brainly.com/question/30111348#
#SPJ11
A 2.50-m-long pole is balanced vertically on its tip. It starts to fall and its lower end does not slip.What will be the speed of the upper end of the pole just before it hits the ground?
The speed of the upper end of the pole just before it hits the ground will depend on the details of the situation, such as the angle at which it falls and the time it takes to reach the ground. Without specific information, the speed cannot be determined.
To calculate the speed of the upper end of the pole just before it hits the ground, we would need additional information about the angle at which the pole falls and the time it takes to reach the ground. The speed can vary depending on these factors.
In general, when a pole falls from a vertical position, its upper end will have a downward velocity due to gravity. As the pole falls, it gains speed and accelerates. The speed of the upper end just before hitting the ground will depend on the acceleration due to gravity and the distance traveled.
Without knowing the specifics of the situation, such as the angle at which the pole falls or the time it takes to reach the ground, we cannot determine the exact speed.
The speed of the upper end of the pole just before it hits the ground cannot be determined without additional information about the angle at which the pole falls and the time it takes to reach the ground. The speed will depend on the specifics of the situation, including the distance traveled and the acceleration due to gravity.
To know more about speed visit:
brainly.com/question/17661499
#SPJ11
A beam of light consisting of wavelengths from 460.0 nm to 640.0 nm is directed perpendicularly onto a diffraction grating with 160 lines/mm. What is the lowest order that is overlapped by another order?
The lowest order that is overlapped by another order in a diffraction grating with 160 lines/mm and a beam of light with wavelengths from 460.0 nm to 640.0 nm is the fourth order.
How to find overlapped diffraction order?The condition for constructive interference in a diffraction grating is given by:
d(sinθ) = mλ
Where d is the distance between the lines of the grating, θ is the angle between the incident light and the normal to the grating, m is the order of the interference, and λ is the wavelength of the light.
In this case, the range of wavelengths in the beam of light is from 460.0 nm to 640.0 nm. We can find the angles at which these wavelengths are diffracted in the first order using the above equation and then find the difference between the angles for the two wavelengths to determine the angle spread of the first order.
For λ = 460.0 nm:
d(sinθ) = mλ
(1/160) mm (sinθ) = 1(460.0 nm)
sinθ = (460.0 nm) (160) / 1000 nm
sinθ = 0.0736
θ = sin⁻¹(0.0736)
θ = 4.25°
For λ = 640.0 nm:
d(sinθ) = mλ
(1/160) mm (sinθ) = 1(640.0 nm)
sinθ = (640.0 nm) (160) / 1000 nm
sinθ = 0.1024
θ = sin⁻¹(0.1024)
θ = 5.89°
The angle spread of the first order is:
Δθ = θ(λ=640.0nm) - θ(λ=460.0nm)
Δθ = 5.89° - 4.25°
Δθ = 1.64°
The lowest order that is overlapped by another order occurs when the angle spread of a higher order is equal to or greater than the angle spread of the first order. For a given order m, the angle spread is proportional to m. Therefore, we can find the lowest order that is overlapped by another order by solving for m in the following equation:
mΔθ ≥ θ(λ=640.0nm)
mΔθ = m(1.64°)
θ(λ=640.0nm) = 5.89°
m(1.64°) ≥ 5.89°
m ≥ 3.59
Since m must be an integer, the lowest order that is overlapped by another order is the fourth order (m = 4).
Learn more about: diffraction
brainly.com/question/12290582
#SPJ11
an alpha particle (4he) undergoes an elastic collision with a stationary lead nucleus (208pb). what percent of the kinetic energy of the alpha particle is transferred to the le
Approximately 0.099% of the kinetic energy of the alpha particle is transferred to the lead nucleus during the elastic collision
To determine the percentage of kinetic energy transferred to the lead nucleus during an elastic collision with an alpha particle, we can use the concept of conservation of kinetic energy and momentum.
In an elastic collision, both momentum and kinetic energy are conserved. The initial momentum of the system before the collision is equal to the final momentum of the system after the collision. Similarly, the initial kinetic energy of the system is equal to the final kinetic energy of the system.
Since the lead nucleus is initially at rest (stationary), its initial momentum is zero. After the collision, both the alpha particle and the lead nucleus will have a final velocity. The conservation of momentum implies:
Momentum before collision = Momentum after collision
m_alpha * v_alpha = m_pb * v_pb
where:
m_alpha is the mass of the alpha particle,
v_alpha is the velocity of the alpha particle,
m_pb is the mass of the lead nucleus,
v_pb is the velocity of the lead nucleus after the collision.
The kinetic energy of the system before the collision is given by:
KE_initial = (1/2) * m_alpha * v_alpha^2
The kinetic energy of the system after the collision is given by:
KE_final = (1/2) * m_alpha * v_alpha^2 + (1/2) * m_pb * v_pb^2
Since the collision is elastic, we can equate the initial and final kinetic energy:
(1/2) * m_alpha * v_alpha^2 = (1/2) * m_alpha * v_alpha^2 + (1/2) * m_pb * v_pb^2
Simplifying the equation, we can find:
(1/2) * m_alpha * v_alpha^2 = (1/2) * m_pb * v_pb^2
The mass of the alpha particle (m_alpha) is known to be 4 atomic mass units (amu), and the mass of the lead nucleus (m_pb) is 208 atomic mass units (amu).
Using this information, we can calculate the velocity ratio (v_pb/v_alpha) as follows:
v_pb/v_alpha = sqrt(m_alpha/m_pb)
v_pb/v_alpha = sqrt(4/208)
v_pb/v_alpha ≈ 0.141
Now, to determine the percentage of kinetic energy transferred to the lead nucleus, we need to calculate the ratio of kinetic energies before and after the collision:
Percentage of KE transferred = (KE_initial - KE_final) / KE_initial * 100
Substituting the expressions for KE_initial and KE_final, we have:
Percentage of KE transferred = [(1/2) * m_alpha * v_alpha^2 - (1/2) * m_alpha * v_alpha^2 - (1/2) * m_pb * v_pb^2] / [(1/2) * m_alpha * v_alpha^2] * 100
Percentage of KE transferred = [(1/2) * m_pb * v_pb^2] / [(1/2) * m_alpha * v_alpha^2] * 100
Percentage of KE transferred = (m_pb / m_alpha) * (v_pb / v_alpha)^2 * 100
Substituting the values of m_alpha, m_pb, and the velocity ratio v_pb/v_alpha, we can calculate the percentage of kinetic energy transferred.
Percentage of KE transferred = (208 / 4) * (0.141)^2 * 100
Percentage of KE transferred ≈ 0.099%
Approximately 0.099% of the kinetic energy of the alpha particle is transferred to the lead nucleus during the elastic collision.
To know more about kinetic refer here
https://brainly.com/question/999862#
#SPJ11
hat is the sum of all frequencies in a frequency distribution? (Hint it is not 1) [1 sentence]
The sum of all frequencies in a frequency distribution is equal to the total number of observations in the data set.
Frequency distribution is a way of organizing and presenting data in a tabular form. It shows how often each value or range of values occurs in a data set. The sum of all frequencies in a frequency distribution gives us the total number of observations in the data set. This is because each frequency represents the number of times a particular value or range of values appears in the data set.
For example, if we have a frequency distribution of heights of students in a class and the frequency of students with a height of 150 cm is 5, it means that there are 5 students in the class who have a height of 150 cm. The sum of all frequencies in this case will be equal to the total number of students in the class. Therefore, the sum of all frequencies in a frequency distribution is not equal to 1, but rather represents the total number of observations in the data set.
Learn more about frequency here:
https://brainly.com/question/30629313
#SPJ11
.What is compression?
It is none of these.
Compression is a stress force that thins rock out in the middle.
Compresssion is the stress force that sqeeezes rock untiiil it folddds or breaks.
Compression is the stress force that squeezes rock until it folds or breaks.
Compression is a type of stress force that occurs when two forces act in opposite directions, pushing toward each other and attempting to compress or shorten the material between them.
In geology, compression can occur due to tectonic forces that cause rocks to be squeezed until they fold or break. This can result in the formation of mountains and other geological features.
Compression can also be caused by other forces, such as the weight of a heavy object pressing down on a surface, or the force exerted on a spring when it is compressed.
In materials science, compression can be used to test the strength and durability of materials, as well as to shape and form them into specific shapes.
To know more about Compression refer here
https://brainly.com/question/22170796#
#SPJ11
physical science chapter 14 work power and machines assessment answers
In physical science, work, power, and machines are important concepts related to the transfer and transformation of energy. Let's explore each of these concepts in more detail:
Work: Work is the transfer of energy that occurs when a force is applied to an object and the object moves in the direction of the force. It is calculated using the formula W = F.d, where W is the work done, F is the force applied, and d is the distance over which the force is applied.
Power: Power is the rate at which work is done or the amount of work done per unit of time. It is calculated using the formula P = W/t, where P is the power, W is the work done, and t is the time taken to do the work.
Machines: Machines are devices that make work easier by changing the size or direction of a force. Machines can be categorized as simple or compound. Simple machines include levers, pulleys, inclined planes, wedges, screws, and wheel and axle systems. Compound machines are combinations of two or more simple machines working together.
When answering assessment questions related to work, power, and machines, remember to apply these key concepts and use the appropriate formulas to calculate the values needed.
To learn more about power visit: https://brainly.com/question/11569624
#SPJ11
cylindrical disk a is rotating freely about an axis when an identical disk b that is not rotating is dropped directly on top of disk a . if the two disks stuck together, how does the total angular momentum and total kinetic energy of the two-disk system after the disks are stuck together compare to that of the system before disk b was dropped?
The total angular momentum of the system after the disks are stuck together will be the same as that of the system before disk b was dropped, but the total kinetic energy of the system after the disks are stuck together will be less than that of the system before disk b was dropped.
When an identical disk b that is not rotating is dropped directly on top of rotating cylindrical disk a, the two disks will stick together due to the frictional force between them. This will result in the formation of a single object that is a combination of both disks.
Before the two disks were stuck together, the total angular momentum of the system was the sum of the angular momentum of disk a and the angular momentum of disk b. Since disk b was not rotating, its angular momentum was zero. The angular momentum of disk a was given by the equation L = Iω, where I is the moment of inertia of disk a and ω is its angular velocity.
The total kinetic energy of the system before the two disks were stuck together was the sum of the kinetic energy of disk a and the kinetic energy of disk b. The kinetic energy of each disk is given by the equation KE = ½Iω², where I is the moment of inertia and ω is the angular velocity.
After the two disks are stuck together, the moment of inertia of the system will increase since the moment of inertia of two disks together is greater than that of a single disk. Therefore, in order to conserve angular momentum, the angular velocity of the combined object will decrease. This means that the total angular momentum of the system after the disks are stuck together will be the same as that of the system before disk b was dropped.
However, since the angular velocity has decreased, the kinetic energy of the system after the disks are stuck together will be less than the kinetic energy of the system before disk b was dropped. This is because the kinetic energy of a rotating object is proportional to the square of its angular velocity, and since the angular velocity has decreased, the kinetic energy will decrease as well.
To know more about angular momentum visit:-
https://brainly.com/question/30656024
#SPJ11
A tank contains 400 gal of brine in which 100 lb. Of salt are dissolved. Fresh water runs into the
tank at a rate of 2 gal/min. The mixture, kept practically uniform by stirring, runs out at the same rate.
How much salt will there be in the tank at the end of 1 hour?
At the end of 1 hour, there will be 130 pounds of salt in the tank. To solve this problem, we need to consider the rate at which salt enters and leaves the tank.
The rate at which fresh water runs into the tank is 2 gallons per minute. Since there are 60 minutes in an hour, the total amount of fresh water entering the tank in 1 hour is:
2 gallons/minute * 60 minutes/hour = 120 gallons/hour
The mixture is kept practically uniform, which means that the concentration of salt remains constant throughout the tank. Therefore, the concentration of salt in the tank remains the same.
Initially, there are 100 pounds of salt dissolved in 400 gallons of brine, so the initial concentration of salt is:
100 pounds / 400 gallons = 0.25 pounds/gallon
Since the concentration remains constant, the amount of salt in the tank at the end of 1 hour is:
0.25 pounds/gallon * (400 gallons + 120 gallons) = 0.25 pounds/gallon * 520 gallons
= 130 pounds
Therefore, at the end of 1 hour, there will be 130 pounds of salt in the tank.
Learn more about fresh water
https://brainly.com/question/4381433
#SPJ4
pls help asap!!
Given the following double-convex lens (the “X”s are the focal points and the arrow, the object):
Complete the ray diagram.
Describe the image.
Give a real-life example of the use of the lens shown on the diagram.
Lens with a vertical arrow to the left. The x marker is twice the distance as the arrow is from the lens.
Answer:
Q. Describe the image.
Ans. The object is between the focal point and the optical centre. Hence, the image does not converge to form a real image but rather diverges to form a virtual image. It lies on the same side as the object. The Image is enlarged and upright with its arrowhead pointing up.
Q. Give a real-life example of the use of the lens shown on the diagram.
Ans. Magnification glass, Camera lens.
a wire is bent into the shape of a circle of radius r = 0.10 m and carries a 20.0-a current in the direction shown. what is the magnitude of the magnetic field at the center of the loop?
To find the magnitude of the magnetic field at the center of a wire loop carrying a current, we can use Ampere's law. According to Ampere's law, the magnetic field (B) can be calculated as the product of the current (I) and the circumference of the loop (2πr), divided by twice the radius (2r).
In this case, the radius of the loop is given as 0.10 m, and the current is 20.0 A. Therefore, the magnetic field at the center of the loop can be calculated as follows:
B = (μ₀ * I) / (2r)
Where μ₀ is the permeability of free space, approximately equal to 4π × 10^(-7) T·m/A.
Plugging in the given values:
B = (4π × 10^(-7) T·m/A * 20.0 A) / (2 * 0.10 m)
= (4π × 10^(-7) T·m/A * 20.0 A) / (0.20 m)
= 40π × 10^(-6) T
≈ 125.66 μT
Therefore, the magnitude of the magnetic field at the center of the wire loop is approximately 125.66 microteslas (μT).
Learn more about magnetic field here : brainly.com/question/9111055
#SPJ11
the blood pressure in someone's heart is 1.90 104 pa at a certain instant. an artery in the brain is 0.36 m above the heart. what is the pressure in the artery? the density of blood is 1060 kg/m^3.
To determine the pressure in the artery, we can use the hydrostatic pressure equation, which states that the pressure at a certain height within a fluid is given by:
P = P₀ + ρgh
Where:
P is the pressure at the desired height,
P₀ is the initial pressure (in this case, the blood pressure in the heart),
ρ is the density of the fluid (in this case, the density of blood),
g is the acceleration due to gravity (approximately 9.8 m/s²),
h is the height difference between the two locations (in this case, the height difference between the heart and the artery).
Given:
P₀ (heart blood pressure) = 1.90 × 10^4 Pa,
h (height difference) = 0.36 m,
ρ (blood density) = 1060 kg/m³,
g (acceleration due to gravity) = 9.8 m/s².
Let's calculate the pressure in the artery using the provided values:
P = P₀ + ρgh
P = 1.90 × 10^4 Pa + (1060 kg/m³) × (9.8 m/s²) × (0.36 m)
Calculating the expression inside the parentheses:
(1060 kg/m³) × (9.8 m/s²) × (0.36 m) = 3772.32 Pa
Substituting this value back into the equation:
P = 1.90 × 10^4 Pa + 3772.32 Pa
P ≈ 2.28 × 10^4 Pa
Therefore, the pressure in the artery is approximately 2.28 × 10^4 Pa.
To know more about pressure refer here
https://brainly.com/question/30673967#
#SPJ11
does the principle of linear superposition imply that two sound waves, passing through the same place at the same time, always create a louder sound than is created by either wave alone?
The principle of linear superposition states that when two waves meet at the same point in space and time, their amplitudes are added together. This can result in either constructive interference, where the amplitudes of the waves add together to create a larger wave, or destructive interference, where the amplitudes of the waves cancel each other out.
Whether or not two sound waves passing through the same place at the same time will create a louder sound than either wave alone depends on the specific circumstances. If the waves are in phase, meaning their peaks and troughs line up perfectly, then they will create a larger wave through constructive interference. However, if the waves are out of phase, meaning their peaks and troughs do not line up, they can cancel each other out and create a smaller wave through destructive interference.
Therefore, the principle of linear superposition does not always imply that two sound waves passing through the same place at the same time will create a louder sound than either wave alone. It depends on the phase relationship between the waves.
Learn more about linear superposition at
brainly.com/question/29770393
#SPJ11
When an ideal gas is expanded, which of the followings must be true? Select all apply. the work done by the gas is zero the work done by the gas is positive the work done by the gas is negative the work done on the gas is zero the work done on the gas is positive the work done on the gas is negative not enough information
When an ideal gas is expanded, the work done by the gas and the work done on the gas depend on the specific conditions of the expansion. Therefore, it is not possible to determine the sign of the work done without additional information.
The work done by or on a gas during expansion depends on various factors, including the initial and final volumes, the pressure, and the process by which the expansion occurs. In general, if the gas expands against an external pressure and the gas pressure is greater than the external pressure, then work is done by the gas and the work done is positive. Conversely, if the gas pressure is lower than the external pressure, work is done on the gas and the work done is negative. If the gas expands in an isobaric (constant pressure) or isothermal (constant temperature) process, then the work done can be determined. However, without specific information about the conditions of the expansion, it is not possible to determine the sign of the work done. Therefore, the correct answer is "not enough information."
Learn more about ideal gas here: brainly.com/question/30236490
#SPJ11
(p 6) q 5 = 630. (a) find the elasticity when p = $24. (round your answer to two decimal places.)
To find the elasticity when the price (p) is $24, we need to use the given information that (p + 6)q = 630, where q is the quantity demanded.
The given equation is (p + 6)q = 630, where p is the price and q is the quantity demanded. We are asked to find the elasticity when the price is $24.
By substituting p = $24 into the equation, we have (24 + 6)q = 630. Simplifying this equation, we get 30q = 630. Dividing both sides by 30, we find that q = 21, which is the quantity demanded when the price is $24.
To calculate the elasticity at the given price, we need to use the formula for elasticity:
Elasticity = (Percentage change in quantity demanded) / (Percentage change in price).
Since we are only given one price, we cannot calculate the percentage change in price. Therefore, we cannot determine the numerical value of elasticity at the price of $24 without additional information.
Learn more about elasticity here : brainly.com/question/30610639
#SPJ11
to have a fundamental frequency at 110 hz , to what tension must a spider adjust a 18 cm -long strand of silk?
The spider must adjust the tension of the silk strand to approximately 0.038 N to produce a fundamental frequency of 110 Hz.
To calculate the tension that a spider must adjust a strand of silk to produce a fundamental frequency of 110 Hz, we need to use the following formula:
`f = (1/2L)*sqrt(T/µ)`
Here, f is the fundamental frequency, L is the length of the silk strand, T is the tension in the strand, and µ is the linear density of the silk.
Given that the length of the strand is L = 18 cm = 0.18 m and the desired fundamental frequency is f = 110 Hz, we can solve for T:
`T = (4µL^2f^2) /π^2`
The linear density of silk is about 1.3 g/m, or 1.3 × 10^-3 kg/m. Therefore, the linear density of the 18 cm strand is:
`µ = 1.3 × 10^-3 kg/m * (1 m/100 cm) * 18 cm = 2.34 × 10^-4 kg/m`
Now we can plug in the values for L, f, and µ to calculate T:
`T = (4 × 2.34 × 10^-4 kg/m × (0.18 m)^2 × (110 Hz)^2) / π^2 ≈ 0.038 N`
Therefore, the spider must adjust the tension of the silk strand to approximately 0.038 N to produce a fundamental frequency of 110 Hz.
For such more questions on tension
https://brainly.com/question/28817922
#SPJ11
if an object of mass mm attached to a spring is replaced by one of mass 16m16m, the frequency of the vibrating system changes by what factor?
When the mass is replaced by 16 times its value, the frequency of the vibrating system changes by a factor of 4.
When an object of mass m is attached to a spring, the frequency of the vibrating system is determined by the mass and the spring constant. According to Hooke's Law, the frequency (f) is inversely proportional to the square root of the mass (m).
If we replace the mass m with a new mass 16m, the frequency of the vibrating system will change. Let's denote the original frequency as f1 and the new frequency as f2.
The relationship between the frequencies can be expressed as:
f1 / f2 = √(m2 / m1),
where m1 represents the original mass and m2 represents the new mass. Substituting the values, we get:
f1 / f2 = √(16m / m) = √16 = 4.
Therefore, when the mass is replaced by 16 times its value, the frequency of the vibrating system changes by a factor of 4. In other words, the new frequency is four times higher than the original frequency.
To learn more about frequency from the given link
https://brainly.com/question/254161
#SPJ4
A standing wave of frequency 5 hertz is set up on a string 2 meters long with nodes at both ends and in the center. Find the speed at which waves propagate on the string.
The speed at which waves propagate on the string is 20 m/s.
The frequency of a standing wave on a string is related to the length of the string and the speed of the wave through the equation f = nv/2L, where f is the frequency, n is the number of nodes, v is the wave speed, and L is the length of the string.
For a standing wave with nodes at both ends and in the center, n = 3. Solving for v, we get v = 2Lf/3n. Substituting the given values, we get v = 2 x 2 m x 5 Hz / (3 x 3) = 20 m/s. Therefore, the speed at which waves propagate on the string is 20 m/s.
To learn more about speed of the wave click here: brainly.com/question/30462853
#SPJ11
a 5.0 kg ball is dropped from a height of 12.0 m above one end of a uniform bar that pivotsat its center. the bar has mass 8.0 k and is 4.0 m in length. at the other end of the bar sitsanother 5.0 kg ball, unattached to the bar. the dropped ball sticks to the bar after the collision.how high will the other ball go after the collision?
To solve this problem, we can apply the principle of conservation of angular momentum.Since the final angular velocity is zero, the bar will not rotate after the collision. Therefore, the other ball will not rise after the collision, and it will remain at the same height.
The angular momentum (L) of an object can be calculated as the product of its moment of inertia (I) and angular velocity (ω):
L = I × ω
For the system consisting of the bar and the two balls, the initial angular momentum is zero, and after the collision, the angular momentum is given by:
L = I × ω
The moment of inertia (I) of the system is the sum of the moment of inertia of the bar and the moment of inertia of the two balls.
The moment of inertia of the bar (I[tex]_{bar}[/tex]) about its center can be calculated as:
I[tex]_{bar}[/tex] = × m[tex]_{bar}[/tex] × L²
where m[tex]_{bar}[/tex] = 8.0 kg is the mass of the bar and L = 4.0 m is the length of the bar.
The moment of inertia of each ball (I[tex]_{ball}[/tex]) about the pivot point can be calculated as:
I[tex]_{ball}[/tex] = m[tex]_{ball}[/tex] × R²
where m[tex]_{ball}[/tex]= 5.0 kg is the mass of each ball, and R is the distance from the pivot point to the ball.
Since the balls are attached to the ends of the bar, the distance from the pivot point to each ball is half the length of the bar:
R = [tex]\frac{L}{2}[/tex]= [tex]\frac{4}{2}[/tex] = 2.0 m
Now, let's calculate the total moment of inertia :
I[tex]_{bar}[/tex]= (1/12) × 8.0 kg × (4.0 m)²
= 8/3 kg·m²
I[tex]_{ball}[/tex]= 5.0 kg × (2.0 m)²
= 20 kg·m²
I[tex]_{ball}[/tex]= I[tex]_{bar}[/tex] + 2 × I[tex]_{ball}[/tex]
= 8/3 kg·m² + 2 * 20 kg·m²
= 8/3 kg·m² + 40 kg·m²
= 8/3 kg·m² + 120/3 kg·m²
= 128/3 kg·m²
After the collision, the system will rotate about the pivot point with an angular velocity (ω). The angular velocity can be calculated from the conservation of angular momentum equation:
L[tex]_{initial}[/tex] = L[tex]_{final}[/tex]
0 = I[tex]_{initial}[/tex] × ω[tex]_{initial}[/tex] + I[tex]_{ball}[/tex] × ω[tex]_{final}[/tex]
Since the initial angular velocity is zero, we can solve for the final angular velocity:
I[tex]_{ball}[/tex] *ω[tex]_{final}[/tex]= 0
Now, let's calculate the final angular velocity (ω[tex]_{final}[/tex]):
ω[tex]_{final}[/tex]= 0 / (I[tex]_{total}[/tex] + I[tex]_{ball}[/tex])
= 0 / (128/3 kg·m² + 20 kg·m²)
= 0 / (128/3 kg·m² + 60/3 kg·m²)
= 0 / (188/3 kg·m²)
= 0
Since the final angular velocity is zero, the bar will not rotate after the collision.
Therefore, the other ball will not rise after the collision, and it will remain at the same height.
To know more about angular momentum
https://brainly.com/question/4126751
#SPJ4
in addition to shape, clouds are classified by which parameter?
(II) A diverging lens with $f=-31.5 \mathrm{cm}$ is placed 14.0 $\mathrm{cm}$ behind a converging lens with $f=20.0 \mathrm{cm} .$ Where will an object at infinity be fo…
(II) A diverging lens with $f=-31.5 \mathrm{cm}$ is placed 14.0 $\mathrm{cm}$ behind a converging lens with $f=20.0 \mathrm{cm} .$ Where will an object at infinity be focused?
To determine the final image position when an object at infinity is placed in front of a combination of lenses, we can use the lens formula:
1/f = 1/v - 1/u,
where f is the focal length of the lens, v is the image distance, and u is the object distance.
In this case, we have a diverging lens (first lens) with f = -31.5 cm and a converging lens (second lens) with f = 20.0 cm.
Let's assume the object at infinity is placed in front of the combination of lenses. Since the object is at infinity, the object distance (u) is infinite.
Using the lens formula for the diverging lens:
1/f1 = 1/v1 - 1/u,
1/-31.5 cm = 1/v1 - 1/infinity,
1/v1 = 0 - 0,
v1 = infinity.
The image formed by the diverging lens is at infinity.
Now, we can use the lens formula for the converging lens to find the final image position:
1/f2 = 1/v - 1/u,
1/20.0 cm = 1/v - 1/infinity,
1/v = 0 + 0,
v = infinity.
The final image formed by the combination of lenses is also at infinity.
Therefore, when an object at infinity is placed in front of the combination of lenses, the final image will be focused at infinity.
To know more about combination of lenses refer here
https://brainly.com/question/29554381#
#SPJ11
bob is walking down the sidewalk and sees that there is a stick in the path. he slows down, steps over the stick and is able to keep walking. what did bob practice to avoid falling?
Bob demonstrated his skill in maintaining balance and avoiding potential hazards as he encountered a stick on the sidewalk.
By slowing down, he was able to assess the situation and adjust his movements accordingly, ensuring he did not stumble or fall. This incident showcases Bob's practice of proprioception, the ability to sense the position and movement of his body parts without relying on visual cues alone.
Proprioception enables individuals to make fine adjustments to their posture and movements, contributing to their overall coordination and balance. Bob's ability to navigate the stick without stumbling suggests he has honed his proprioceptive skills through regular practice, allowing him to respond effectively to unexpected obstacles and maintain stability while walking.
For more information on balance visit: brainly.com/question/31839775
#SPJ11
A golf ball is hit and given 9 J. of kinetic energy.
The ball's velocity is 20 m/s. What is its mass?
The mass of the golf ball is 0.045 kg.
How to find the mass of the golf ballWe can use the formula for kinetic energy:
[tex]KE = 1/2 * m * v^2[/tex]
Where
KE is the kinetic energy in joulesm is the mass in kilogramsv is the velocity in meters per secondWe know that KE = 9 J and v = 20 m/s. We can solve for m by rearranging the equation:
[tex]m = 2 * KE / v^2[/tex]
Plugging in the known values, we get:
[tex]m = 2 * 9 J / (20 m/s)^2[/tex]
mass = 0.045 kg
Therefore, the mass of the golf ball is 0.045 kg.
Learn more about kinetic energy here : brainly.com/question/30337295
#SPJ1
A circular loop has radius R and carries current I2 in a clockwise direction (as shown in Fig.) The centre of the loop is at a distance D above a long, straight wire. What are the magnitude and direction of the current I1 in the wire if the magnetic field at the center of the loop is zero?
The magnitude of the current I1 in the wire should be zero in order to have a zero magnetic field at the center of the circular loop. The direction of the current is not relevant in this case since its magnitude is zero.
What is Ampere's Law?To determine the magnitude and direction of the current I1 in the wire such that the magnetic field at the center of the loop is zero, we can use Ampere's Law.
Ampere's Law states that the line integral of the magnetic field around a closed loop is equal to the product of the permeability of free space (μ₀) and the total current passing through the loop. In this case, the closed loop is the circular loop carrying current I2, and we want the magnetic field at the center of this loop to be zero.
Since we have a long, straight wire and a circular loop, we can consider an imaginary circular Amperian loop centered at the center of the circular loop. The magnetic field due to the straight wire will circulate around this Amperian loop.
Let's assume that the radius of the circular Amperian loop is r. At the center of the circular loop, the magnetic field due to the straight wire is given by:
[tex]B = (μ₀ * I1) / (2π * r)[/tex]
Since we want the magnetic field at the center of the circular loop to be zero, we can set B = 0 and solve for I1:
[tex](μ₀ * I1) / (2π * r) = 0[/tex]
Since μ₀ and 2π are non-zero constants, the only way for the above equation to hold true is if I1 = 0.
Therefore, the magnitude of the current I1 in the wire should be zero in order to have a zero magnetic field at the center of the circular loop. The direction of the current is not relevant in this case since its magnitude is zero.
Learn more about current
brainly.com/question/15141911
#SPJ11
A person pushes a 60 kg grocery cart, initially at rest. across a parking lot. He exerts a pushing force directed 20" below the horizontal. If the person pushes the cart with a force of 300 N for 5 m across horizosal ground and then releases the cart, the car has a speed of 3 m/s What is the work done by friction during this motion! (A) - 1230 (B)-1140J (C) 1140) (D) 1230)
A person pushes a grocery cart with a force of 300 N for 5 m, resulting in a speed of 3 m/s. The work done by friction is approximately -1140 J. (Answer: B)
The work done by friction can be calculated using the equation: work = force × distance × cos(θ), where θ is the angle between the force and the direction of motion.
In this case, the force of friction opposes the motion and is in the opposite direction of the pushing force. Since the pushing force is 20" below the horizontal, the angle θ is 20°. Therefore, the work done by friction is given by: work = (-300 N) × (5 m) × cos(20°).
Calculating this expression gives a result of approximately -1140 J. Hence, the correct answer is (B) -1140 J, indicating that the work done by friction is negative, as it acts against the motion of the cart.
Learn more about Friction click here :brainly.com/question/13680415
#SPJ11
Which statement about constant-pressure fog nozzles is MOST accurate? The operator can vary the flow rate while maintaining constant nozzle pressure.
The statement "The operator can vary the flow rate while maintaining constant nozzle pressure" is the most accurate description of constant-pressure fog nozzles.
Constant-pressure fog nozzles are designed to maintain a constant pressure at the nozzle, regardless of changes in the flow rate. This means that the operator can adjust the flow rate by opening or closing the nozzle without affecting the nozzle pressure. The nozzle is designed to maintain a consistent pressure, which helps ensure consistent performance and spray pattern.
This feature allows the operator to have control over the flow rate while maintaining a constant pressure, providing flexibility and ease of use in applications such as firefighting, dust suppression, and irrigation systems.
To know more about constant-pressure, click here https://brainly.com/question/3412132
#SPJ11
3. a 0.500-kg mass attached to a spring oscillates with a period of 1.50 s. assuming the motion is simple harmonic, how much mass must be added to the object to change the period to 2.00 s?
The period of an object oscillating on a spring is given by T = 2π√(m/k), where T is the period, m is the mass of the object, and k is the spring constant.
We are given an initial period of 1.50 s and a mass of 0.500 kg.
Solving for k, we get a value of 7.02 N/m.
In order to find the new mass that needs to be added to change the period to 2.00 s, we use the same equation and solve for the new mass, which is approximately 3.63 kg.
Therefore, adding a mass of approximately 3.63 kg to the 0.500-kg mass will change the period of oscillation from 1.50 s to 2.00 s.
Read more about Simple harmonic.
https://brainly.com/question/30404816
#SPJ11
6- the thin plate has a mass per unit area of 10 kg/m2. determine its mass moment of inertia about the y axis.
Given that the mass per unit area (σ) is 10 kg/m², you can plug in the values for the dimensions a and b when they are provided to calculate the mass moment of inertia about the y-axis.
To determine the mass moment of inertia (Iy) of a thin plate about the y-axis, we need to know its shape, dimensions, and mass per unit area (σ). Since the shape and dimensions are not provided, I'll explain the general concept.
For a rectangular thin plate with dimensions a (width) and b (height), the mass moment of inertia about the y-axis is given by:
Iy = (1/12) * σ * a * b^3
Hence, Given that the mass per unit area (σ) is 10 kg/m², you can plug in the values for the dimensions a and b when they are provided to calculate the mass moment of inertia about the y-axis.
learn more about mass click here:
https://brainly.com/question/86444
#SPJ11