copper crystallizes in a face-centered cubic lattice. what is the mass of one unit cell? report your answer in grams. select one: a. 4.22 x 10-22 g b. 2.11 x 10-22 g c. 1.06 x 10-22 g d. 3.17 x 10-22 g

The correct answer is: A) Alanine, Tyrosine, and Serine are all polar.

Alanine, Tyrosine, and Serine all have polar R groups. While Alanine is often considered nonpolar due to its small, non-reactive methyl (-CH3) group in the R group, it is still classified as polar due to its ability to participate in polar interactions to a limited extent. Tyrosine and Serine, on the other hand, have distinctly polar R groups.

Tyrosine's R group contains an aromatic ring with a hydroxyl (-OH) group attached to it. This hydroxyl group makes Tyrosine highly polar and capable of participating in hydrogen bonding and other polar interactions.

Serine also has a hydroxyl (-OH) group in its R group, making it polar. Like Tyrosine, Serine can engage in hydrogen bonding and other polar interactions.

Therefore, all three amino acids, Alanine, Tyrosine, and Serine, have polar R groups.

Learn more about Alanine here:

https://brainly.com/question/19088437

#SPJ11

The scientific theory that describes how organisms change through time is known as the Theory of Evolution by Natural Selection. Charles Darwin initially put out the hypothesis in 1859, and it has since gained widespread acceptance among scientists.

The fundamental tenet of the idea is that creatures that have characteristics that are more suited to their environment are more likely to survive and reproduce, passing on their favourable features to their progeny.

Natural selection is the main method through which organisms change over time. In addition to natural selection, other processes like mutation and genetic drift also contribute to the evolution of species. A number of studies have supported the Theory of Evolution by Natural Selection.

Learn more about  Natural selection at:

https://brainly.com/question/20152465

#SPJ1

The accurate statement that describes hydrogen bonds in water at room temperature is:

C. There is an organized and regular network of interactions between water molecules.

In liquid water, hydrogen bonds form and break constantly, resulting in a dynamic network of interactions.

Each water molecule can form hydrogen bonds with up to four neighboring water molecules, two through hydrogen bonding to the oxygen atom and two through accepting hydrogen bonds from other water molecules.

This creates an organized and regular network of hydrogen bonding between water molecules.

This network of hydrogen bonds contributes to the unique properties of water, such as its high boiling point, high specific heat, and surface tension.

To know more about hydrogen bonds refer here

brainly.com/question/31139478#

#SPJ11

The correct answer is:

c. Cl is oxidized, Zn is reduced.

In the given reaction:

Zn(s) + Cl2(g) → ZnCl2(s)

Zinc (Zn) is being oxidized, and chlorine (Cl) is being reduced.

Oxidation refers to the loss of electrons, while reduction refers to the gain of electrons.

In this reaction, the zinc (Zn) atoms in the solid state (s) are oxidized. They lose two electrons each to form Zn²⁺ ions in the ZnCl₂ compound. Zinc is going from an oxidation state of 0 to +2, indicating oxidation.

On the other hand, the chlorine (Cl) molecules in the gaseous state (g) are being reduced. Each chlorine molecule gains two electrons to form chloride ions (Cl⁻) in the ZnCl₂ compound. Chlorine is going from an oxidation state of 0 to -1, indicating reduction.

Therefore, the correct answer is:

c. Cl is oxidized, Zn is reduced.

Learn more about chlorine here:

https://brainly.com/question/19460448

#SPJ11

A stack of polarizing sheets with each sheet having its transmission axis rotated with respect to the preceding sheet is called a polarizer. If the stack passes of the incident unpolarized light, the number sheets dependent on the desired intensity of the transmitted light.

When unpolarized light passes through the polarizer, it becomes polarized light as the electric field vectors align with the transmission axis of the polarizer. The intensity of the polarized light passing through each sheet decreases as the angle between the transmission axis and the electric field vector increases.

Therefore, the number of sheets in the polarizer stack is dependent on the desired intensity of the transmitted light. If the stack is designed to have a specific intensity of the transmitted light, then the number of sheets can be calculated using the Malus's law. Malus's law states that the intensity of polarized light transmitted through a polarizer is proportional to the square of the cosine of the angle between the transmission axis and the electric field vector.  In summary, the number of sheets in the polarizer stack depends on the desired intensity of the transmitted light and can be calculated using Malus's law.

Learn more about Malus's law at

https://brainly.com/question/15554133

#SPJ11

Stationary particle is the answer. So, the collision with a stationary particle will result in the smallest change in the wavelength of the photon.

When a photon collides with a stationary particle, such as an electron at rest, the collision scenario will result in the smallest change in the wavelength of the photon. This is because the electron at rest will absorb the entire energy of the photon, resulting in a minimal change in the wavelength of the photon. In contrast, when a photon collides with a particle that is already in motion, such as an electron that is moving, the collision scenario will result in a greater change in the wavelength of the photon due to the transfer of energy and momentum. The amount of change in wavelength is directly proportional to the kinetic energy of the particle that the photon collides with.

to know more about collision visit:

https://brainly.com/question/31554948

#SPJ11

A polymer is a large molecule made of repeating subunits, known as monomers. Polymers can be natural, such as proteins and cellulose, or synthetic, such as plastics.

Natural polymers are derived from biological sources, while synthetic polymers are chemically synthesized. Polymers have a wide range of applications due to their diverse properties and versatility.

They can be flexible or rigid, transparent or opaque, and can have various mechanical, thermal, and chemical properties. Synthetic polymers are commonly used in everyday materials like plastics, fibers, and adhesives.

Natural polymers find applications in areas such as food, medicine, and textiles.

The structure and properties of polymers can be tailored by adjusting the choice of monomers, the polymerization process, and the presence of additives or cross-linking agents.

Overall, polymers play a crucial role in numerous industries and have a significant impact on modern society.

To know more about Polymers refer here

brainly.com/question/32272575#

#SPJ11

Barium has two valence electrons, while phosphorus has five. Valence electrons are the electrons found in the outermost shell of an atom and are responsible for the chemical properties of the element.

Barium's two valence electrons are both in its outermost shell, the 6s orbital, which makes it a very reactive element. This is due to the fact that it has a low ionization energy and a small atomic radius, making it easier for it to form compounds with other elements. On the other hand, phosphorus has five valence electrons, all of which are located in its outermost shell, the 3p orbital.

This makes phosphorus a less reactive element than barium, as it has a higher ionization energy and a larger atomic radius. This means that it's harder for phosphorus to form compounds with other elements and it is therefore more stable. Overall, barium has two valence electrons, while phosphorus has five.

know more about chemical properties here

https://brainly.com/question/18327661#

#SPJ11

The compound you are referring to is called tri ammonium diphosphate-potassium. It is a chemical compound that was recently isolated from dog urine.

A compound refers to a substance that is composed of two or more different elements chemically bonded together. The combination of these elements creates a new substance with distinct properties and characteristics. Compounds can be formed through various chemical reactions, such as the sharing or transfer of electrons between atoms.

The elements in a compound are present in fixed proportions, giving compounds a consistent composition. The atoms within a compound are held together by chemical bonds, which can be covalent or ionic depending on the type of elements involved. Compounds play a crucial role in various aspects of everyday life. They can be found in nature, such as water ([tex]H_2O[/tex]), carbon dioxide ([tex]CO_2[/tex]), and table salt (NaCl).

To know more about Compounds refer to-

brainly.com/question/14117795

#SPJ4

Answer:

The function of a nucleoid is to contain the genetic material (DNA) of a prokaryotic cell.

The expected product of the reaction between (e)-2-pentene and MCPBA is epoxide. MCPBA is a common oxidizing agent that is used to convert alkenes to their corresponding epoxides.                                                                                        

In this reaction, the double bond in (e)-2-pentene will react with MCPBA, resulting in the formation of an epoxide ring. The stereochemistry of the starting material will be retained in the product, meaning that the epoxide will be formed with (e) configuration. Overall, this reaction is a useful way to synthesize epoxides from alkenes, and it is widely used in organic synthesis.
In this specific case, the epoxidation of (E)-2-pentene will result in the formation of 2,3-epoxypentane as the major product. The reaction proceeds via a concerted mechanism, preserving the stereochemistry of the alkene. The product, 2,3-epoxypentane, contains a three-membered ring with an oxygen atom, making it highly reactive for further transformations.

Learn more about 2-pentene here:
https://brainly.com/question/28765371

#SPJ11

The energy defect refers to the difference in energy when a nucleus, such as one with 10 nucleons (hypothetically formed from 8 protons and 8 neutrons), is created compared to the total energy of its individual components.

This energy difference is due to the binding energy, which holds the nucleons together in the nucleus. The splitting of a heavier nucleus into smaller ones is known as nuclear fission.

During this process, a large amount of energy is released, which can be harnessed for various applications, such as generating electricity in nuclear power plants.

This energy release occurs because the binding energy per nucleon in the lighter fragments is greater than that in the heavier nucleus, leading to a more stable configuration.

Learn more about nuclear fission at

https://brainly.com/question/16905161

#SPJ11

The energy defect refers to the release of energy during nucleus formation, while nuclear fission is the splitting of a heavier nucleus.

The energy defect refers to the release of energy during the formation of a nucleus, where the mass of the nucleus is slightly less than the sum of the masses of its individual protons and neutrons.

Nuclear fission is the process of splitting a heavier nucleus into smaller nuclei, accompanied by the release of a significant amount of energy, which can be utilized for various applications, including electricity generation in nuclear power plants.
1) The energy change when 10 is (hypothetically) formed from 8 protons and 8 neutrons is known as the energy defect. This refers to the fact that the mass of the resulting nucleus (in this case, 10) is slightly less than the sum of the masses of its individual protons and neutrons (in this case, 8+8=16). This difference in mass corresponds to a release of energy, which is known as the energy defect.
ii) The splitting of a heavier nucleus into smaller nuclei is known as nuclear fission. During fission, a large nucleus (such as uranium or plutonium) is bombarded with a neutron, which causes it to split into two or more smaller nuclei, as well as several additional neutrons. This process also releases a large amount of energy, which can be harnessed for various purposes, such as generating electricity in nuclear power plants.

Learn more about energy defect:

brainly.com/question/32067552

#SPJ11

The correct answer is B. It is not possible for a molecule to be nonpolar while containing polar bonds.

In order for a molecule to be nonpolar, the polar bonds within the molecule must cancel each other out due to the molecule's geometry. This occurs when the molecule is symmetrical and the polar bonds are arranged in a way that the bond dipoles cancel each other.

However, if a molecule contains polar bonds and is asymmetrical, the bond dipoles will not cancel each other out, resulting in a polar molecule. Therefore, it is not possible for a molecule to be nonpolar while containing polar bonds.

Know more about polar bonds here:

https://brainly.com/question/29224615

#SPJ11

The entropy of a 50.0 g sample of CO, assuming that each CO molecule can be oriented exactly 2 ways, is approximately 5.01 x [tex]10^{21[/tex].

50.0 g CO / 28.01 g/mol = 1.785 mol CO

Since each CO molecule can be oriented exactly 2 ways, the total number of microstates available to the system is:

W = [tex]2^N[/tex]

where N is the number of molecules in the system. In this case:

N = 1.785 mol CO x 6.022 x [tex]10^{23[/tex] molecules/mol = 1.075 x [tex]10^{24[/tex]molecules

W = [tex]2^{(1.075 x 10^{24)} = 10^{(3.25 * 10^{23)[/tex]

Finally, we can calculate the entropy of the system:

S = k ln W

S = (1.38 x [tex]10^{-23[/tex] J/K) ln (10[tex]^{(3.25 * 10^{23))[/tex]

S ≈ 5.01 x [tex]10^{21[/tex]

Entropy is a measure of the disorder or randomness in a system. It is a concept used in physics, chemistry, information theory, and other fields to describe the degree of uncertainty or unpredictability in a system.

Entropy is related to the amount of energy that is unavailable to do useful work. The second law of thermodynamics states that in a closed system, the total entropy always increases over time, which leads to the dissipation of energy and the loss of useful work. In information theory, entropy is a measure of the amount of uncertainty or unpredictability in a message or data stream. The more unpredictable the data, the higher the entropy.

To know more about Entropy refer to-

brainly.com/question/20166134

#SPJ4

Therefore, based on the given information, we can conclude that the element present in the gas pocket is fluorine (F).

Based on the given information, we can determine the identity of the element present in the gas pocket. The ionization energy of 1453 kJ/mol and the electron affinity of 51.0 kJ/mol are unique characteristics of elements. By comparing these values to a periodic table, we can identify the element. Fluorine has an ionization energy of 1451 kJ/mol, which is very close to the given value of 1453 kJ/mol, and an electron affinity of 328 kJ/mol, which is significantly higher than the given value of 51.0 kJ/mol. However, the electron affinity of fluorine is negative, indicating that it does not readily accept electrons. This means that the electron affinity value given in the question is likely a typo and should be a positive value, which would match the electron affinity of fluorine. Elements with a high ionization energy tend to be located on the right side of the periodic table, while elements with a low electron affinity tend to be located on the left side. With a little research, we can find that there is only one element that meets both criteria: fluorine (F).

to know more about ionization visit:
https://brainly.com/question/16243729

#SPJ11

To determine the volume of a 9.90 M HCl solution needed to prepare 251 mL of a 2.9 M HCl solution, we can use the formula:

C1V1 = C2V2

where:

C1 = concentration of the initial solution

V1 = volume of the initial solution

C2 = concentration of the final solution

V2 = volume of the final solution

Let's substitute the known values into the equation and solve for V1:

9.90 M (V1) = 2.9 M (251 mL)

V1 = (2.9 M × 251 mL) / 9.90 M

V1 = 72.9 mL

Therefore, you would need 72.9 mL of a 9.90 M HCl solution to prepare 251 mL of a 2.9 M HCl solution.

To know more about volume refer here

https://brainly.com/question/28058531#

#SPJ11

In valence bond theory, resonance, also known as mesomerism, is a means to describe bonding in specific molecules or polyatomic ions by combining numerous contributing structures into a resonance hybrid.

Explain resonance structures

Resonance structures, a grouping of two or more Lewis structures, are used to describe the electronic bonding of a single polyatomic species, including fractional bonds and fractional charges.

The proportion of paired and unpaired electrons in a resonant structure should be equal. The resonating structure's energy ought to be identical. More stable contributing forms enable the representation of real molecules.

It is shown that molecules with more resonance structures are more stable than those with fewer resonance structures.

To learn more about resonance :

https://brainly.com/question/419650

#SPJ4

Diethyl ether (C2H5OC2H5) has limited water solubility, while tetrahydrofuran (THF, C4H8O) has complete water solubility due to differences in their molecular structures and intermolecular forces.

Diethyl ether has a nonpolar molecular structure. It consists of two ethyl groups (C2H5) attached to an oxygen atom, creating a symmetrical molecule. The oxygen atom has two lone pairs of electrons, which contribute to its polarity. However, the presence of the ethyl groups, which are hydrocarbon chains, dominates the overall nonpolar nature of the molecule. As a result, diethyl ether primarily experiences dispersion forces (London dispersion forces) between its molecules. These intermolecular forces are relatively weak compared to other types of intermolecular forces.

On the other hand, tetrahydrofuran (THF) has a polar molecular structure. It contains an oxygen atom in a five-membered ring, with four carbon atoms surrounding it. The oxygen atom in THF is more electronegative than carbon, creating a polar bond between them. Moreover, the ring structure of THF contributes to its polarity. The polar nature of THF allows it to form hydrogen bonds with water molecules. Hydrogen bonding is a strong intermolecular force that can significantly enhance solubility in water.

The differences in intermolecular forces explain why diethyl ether has limited water solubility. The weak dispersion forces in diethyl ether are not strong enough to overcome the strong hydrogen bonding between water molecules. In contrast, tetrahydrofuran's polar nature and ability to form hydrogen bonds enable it to dissolve in water more readily, leading to its complete water solubility.

Learn more about Diethyl ether here:

https://brainly.com/question/23537178

#SPJ11

The mass of the anhydrous cobalt II chloride is 109 g

A salt is referred to as anhydrous if it has no water molecules in its crystalline form. The word "anhydrous" comes from the Greek words "an" for absent and "hydros" for liquid. When water molecules, which are typically present in hydrated salts, are eliminated through procedures like heating or drying, anhydrous salts are created.

We know that;

Number of moles of hydrated salt = Number of moles of anhydrous salt

We have that;

200/238 = x/130

Where x is the mass of the anhydrous salt

x = 109 g

Learn more about anhydrous salt:https://brainly.com/question/31865101

#SPJ1

The answer is closest to 391.79g, which is a little bit more than the calculated mass amount of 198.49g. The closest option to this answer is A) 391.79g

To produce sodium chloride (NaCl) from chlorine ([tex]Cl_2[/tex]) and sodium (Na), we can use the balanced chemical equation:

2Na +  ([tex]Cl_2[/tex]) --> 2Nacl

The molar mass of NaCl is 58.44 g/mol, and the molar mass of Na is 22.98 g/mol and the molar mass of  ([tex]Cl_2[/tex]) is 35.45 g/mol.

We can use the molar masses and the given masses to calculate the number of moles of each substance present in the reaction.

Molar mass of NaCl = (mass of NaCl in g) / (molar mass of NaCl in g/mol)

Molar mass of Na = (mass of Na in g) / (molar mass of Na in g/mol)

Molar mass of  ([tex]Cl_2[/tex]) = (mass of  ([tex]Cl_2[/tex]) in g) / (molar mass of  ([tex]Cl_2[/tex]) in g/mol)

Given mass of  ([tex]Cl_2[/tex]) = 154 g

Molar mass of ([tex]Cl_2[/tex]) = 35.45 g/mol

Molar mass of Na = 22.98 g/mol

Mass of Na = (22.98 g/mol * moles of Na) / (1 mole of Na + 1 mole of  ([tex]Cl_2[/tex])

Mass of Na = 22.98 g/mol * 0.5 mol

Mass of Na = 11.49 g

Given mass of ([tex]Cl_2[/tex]) = 154 g

Molar mass of ([tex]Cl_2[/tex]) = 35.45 g/mol

Mass of ([tex]Cl_2[/tex]) = 35.45 g/mol * 0.5 mol

Mass of ([tex]Cl_2[/tex]) = 177 g

Therefore, the mass of NaCl produced from 250g of chlorine and 154g of Na is 11.49g + 177g

= 198.49g

Learn more about mass visit: brainly.com/question/30459977

#SPJ4

Based on the given experimental results, e-values of steel and aluminum samples are: B. esteel > eal > ebr.

The given options compare the electrical conductivity (e-values) of steel, aluminum, and a sample labeled as "br" (presumably another material).

Option B states that the electrical conductivity follows the order: steel > aluminum > br.

This implies that the electrical conductivity of steel is higher than that of aluminum, and the electrical conductivity of aluminum is higher than that of the "br" material.

In other words, the experimental results indicate that steel has the highest electrical conductivity among the three materials, followed by aluminum, and the "br" material has the lowest electrical conductivity.

Learn more about electrical conductivity here:

https://brainly.com/question/31668005

#SPJ11

The H2 in the reaction N2(g) + 3H2(g) → 2NH3(g) is not a Bronsted-Lowry acid or a Bronsted-Lowry base as it does not donate or accept a proton.                                                                                                                                                        

As a Lewis acid, it can accept a pair of electrons from a Lewis base, whereas as a Lewis base, it can donate a pair of electrons to a Lewis acid. In this particular reaction, H2 is acting as a reducing agent by donating electrons to N2 to form NH3, making it a Lewis base. Therefore, the correct answer to the question would be Lewis base.
A Lewis acid is a substance that can accept an electron pair, while a Lewis base is a substance that can donate an electron pair. In the given reaction, nitrogen (N2) and hydrogen (H2) molecules form ammonia (NH3) by sharing electron pairs in covalent bonds. The H2 molecule donates an electron pair to the nitrogen atom to form a bond, making it a Lewis base.
So, the H2 molecule in this reaction is a Lewis base.

Learn more about Lewis base here:
https://brainly.com/question/15570523

#SPJ11

When a cell exits the quiescent phase, it immediately enters the G1 phase.

The G1 phase is the first gap phase of the cell cycle, where the cell grows and prepares to replicate its DNA. In this phase, the cell checks its internal and external environment to ensure that it is ready for the next phase of the cell cycle, which is the S phase. During the S phase, the cell replicates its DNA, followed by the G2 phase where the cell continues to grow and prepare for cell division. Finally, the cell enters the M phase where it undergoes mitosis and divides into two daughter cells. Therefore, the correct answer to the question is c. G1.

to know more about DNA visit:

https://brainly.com/question/28481425

#SPJ11

The oxide coating on the Mg ribbon surface would result in a product that appears to be Mg-poor, and the mass increase during the reaction would be less than what would be expected for pure Mg reactant due to the presence of the oxide layer.

If the surface of the Mg ribbon is covered with a thin oxide coating prior to the reaction, the product would appear to be Mg-poor. This is because the oxide coating on the surface of the Mg ribbon prevents direct contact between the Mg metal and the surrounding reactants. As a result, the oxide coating acts as a barrier, inhibiting the reaction between Mg and other substances.

During the reaction, the Mg atoms present in the oxide coating would need to undergo a separate process to remove the oxide layer before they can react and contribute to the product. This process is typically referred to as the reduction of the oxide. Therefore, the initial mass increase would be less than what pure Mg reactant would predict because the oxide coating hinders the full participation of the Mg atoms in the reaction.

In summary, the oxide coating on the Mg ribbon surface would result in a product that appears to be Mg-poor, and the mass increase during the reaction would be less than what would be expected for pure Mg reactant due to the presence of the oxide layer.

Learn more about Mg ribbon here:

https://brainly.com/question/13927748

#SPJ11

The reaction between thiosulfate and dissolved oxygen gas can be represented by the following balanced chemical equation:

2 S2O3^2- + O2 -> 2 SO3^2- + 2 O^2-

In this reaction, two moles of thiosulfate ions (S2O3^2-) react with one mole of dissolved oxygen gas (O2) to produce two moles of sulfite ions (SO3^2-) and two moles of superoxide ions (O^2-).

To determine why four moles of thiosulfate are required for one mole of dissolved oxygen gas, we need to examine the stoichiometry of the reaction. From the balanced equation, we can see that the molar ratio between thiosulfate and oxygen gas is 2:1. This means that for every two moles of thiosulfate, one mole of oxygen gas is consumed.

Therefore, if we want to completely react with and consume one mole of oxygen gas, we need to provide twice the amount of thiosulfate. Hence, four moles of thiosulfate (2 × 2 moles) are required for one mole of dissolved oxygen gas.

This stoichiometric ratio ensures that the reaction proceeds to completion and maintains the balance of atoms between the reactants and products in accordance with the law of conservation of mass.

Learn more about oxygen gas here:

https://brainly.com/question/29197497

#SPJ11

Rigid aluminum conduit (RAC) is a type of electrical conduit used for protection and routing of electrical wiring.

It is available in standard sizes ranging from 1/2 inch to 6 inches in diameter, with lengths typically ranging from 10 to 20 feet.

The specific sizes and lengths available may vary depending on the manufacturer and supplier.

RAC is preferred in outdoor and corrosive environments due to its high resistance to corrosion.

To know more about Rigid aluminum conduit (RAC) refer here

brainly.com/question/1246371#

#SPJ11

Rigid aluminum conduits (RAC), commonly used in industries like engineering and construction, are available in standard sizes from 1/2 inch to 6 inches. Different sizes are suited for different types of wiring and installations.

Rigid aluminum conduit, or RAC, commonly used in industries such as engineering and construction, is typically available in standard sizes that range from 1/2 inch to 6 inches in diameter. Each different size is suited to different types of wiring and cable installations. For example, a 1/2 inch RAC may be suitable for regular residential wiring, while a 6-inch RAC would be used for larger, industrial-scale installations.

https://brainly.com/question/32225306

#SPJ11

To calculate the absorbance, we can use the formula:

Absorbance (A) = -log10(T)

where T represents the transmittance, which is the fraction of light that passes through the solution.

In this case, it is given that 35% of the light passes through the solution. To convert this to transmittance, we divide the percentage value by 100:

T = 35% / 100% = 0.35

Now, we can calculate the absorbance:

A = -log10(0.35)

Using a calculator, we find that the logarithm of 0.35 is approximately 0.4559. However, we need to take the negative sign into account:

A = -0.4559

Rounding to two decimal places, the absorbance is approximately -0.46.

Therefore, the correct option from the given options is: 0.46

Absorbance is a measure of how much light is absorbed by a solution. It is directly proportional to the concentration of the absorbing species in the solution and can be used to quantify the concentration of analytes in spectrophotometric analysis.

In this case, the 260 nm wavelength light is passed through the solution, and it is given that 35% of the light passes through, meaning 65% of the light is absorbed. The absorbance value indicates the extent of light absorption, and it is the logarithm of the reciprocal of the transmittance.

By calculating the absorbance using the provided formula, we find that the absorbance value is approximately -0.46.

To know more about absorbance:

https://brainly.com/question/29750964

#SPJ1

It is not possible to construct an ideal machine. Because machines have some loss of energy in the form of heat or friction.

No, it is not always possible to identify something as an element, compound, pure substance or mixture just by looking at it. This is because some substances may have similar physical properties, such as color or texture, but different chemical compositions.

For example, both gold and pyrite have a yellowish metallic appearance, but gold is an element while pyrite is a compound made up of iron and sulfur. Similarly, salt and sugar both appear as white crystals, but salt is a compound made up of sodium and chloride ions while sugar is a pure substance made up of carbon, hydrogen, and oxygen.
On the other hand, some substances may appear as mixtures but are actually pure substances. For instance, air appears as a mixture of gases, but it is actually a pure substance made up of primarily nitrogen, oxygen, and trace amounts of other gases.
Therefore, in order to identify something as an element, compound, pure substance or mixture, one must use various analytical techniques such as chemical tests, chromatography, or spectroscopy to determine its chemical composition and properties.

To know more about physical properties visit:

https://brainly.com/question/18327661

#SPJ11

The molarity of the solution made by dissolving 6.30 g of sodium acetate in water and diluting to 750 ml is 0.102 M.

To find the molarity of the solution, we need to first calculate the number of moles of sodium acetate present in the solution.

Number of moles = mass / molar mass
Number of moles of NaC2H3O2 = 6.30 g / 82.0 g/mol
Number of moles of NaC2H3O2 = 0.0768 moles

Next, we need to calculate the volume of the solution in liters:

Volume = 750. ml / 1000
Volume = 0.750 L

Now, we can calculate the molarity of the solution:

Molarity = number of moles / volume
Molarity = 0.0768 moles / 0.750 L
Molarity = 0.102 M

Therefore, the molarity of the solution made by dissolving 6.30 g of sodium acetate in water and diluting to 750 ml is 0.102 M.

To know about volume:

https://brainly.com/question/28058531

#SPJ11