The answer C less active (or more noble) than hydrogen. This is because copper has a lower tendency to lose electrons and form cations compared to hydrogen. In other words, copper is a relatively stable element that is not as easily oxidized as hydrogen.
They can be seen in the electrochemical series, which ranks elements according to their tendency to undergo oxidation or reduction reactions. Hydrogen is located higher up on the series, indicating that it is more reactive and has a greater tendency to lose electrons and form cations. On the other hand, copper is located lower down on the series, indicating that it is less reactive and has a lower tendency to undergo oxidation. It is worth noting that copper can still undergo oxidation reactions under certain conditions. For example, when exposed to air and moisture, copper can slowly react to form copper oxide. Additionally, copper can be used as an anode in certain electrochemical cells, indicating that it is more anodic than some other metals. However, in general, copper is considered to be a relatively stable and unreactive element, particularly compared to hydrogen.
learn more about copper here.
https://brainly.com/question/13677872
#SPJ11
the following elimination proceeds via an e1 mechanism. why would you expect this to be a slow reaction that requires heat to proceed?
The slow rate of E1 reactions is due to the high-energy intermediate and the stability of the carbocation intermediate, which is dependent on the electronic nature of the substrate.
An E1 elimination mechanism involves the loss of a leaving group and the formation of a carbocation intermediate. The rate-determining step of this mechanism is the formation of the carbocation intermediate, which is typically a slow process. This is because the carbocation intermediate is a high-energy species that is unstable and reactive.
Additionally, the stability of the carbocation intermediate is dependent on the nature of the substituents attached to the carbon bearing the leaving group. If the carbon has electron-withdrawing groups, such as halogens or carbonyl groups, the carbocation intermediate will be more stable and the reaction will proceed more quickly. On the other hand, if the carbon has electron-donating groups, such as alkyl or aryl groups, the carbocation intermediate will be less stable and the reaction will proceed more slowly.
In the case of an E1 mechanism that requires heat to proceed, this indicates that the reaction is not thermodynamically favorable and that a significant amount of energy is needed to overcome the activation energy barrier. This is typically seen in reactions that involve large, bulky leaving groups or substrates with multiple substituents that hinder the formation of the carbocation intermediate.
To know more about E1 elimination mechanism, refer to the link below:
https://brainly.com/question/31148161#
#SPJ11
Four Alkaline D batteries are placed in series. What is the total voltage of the batteries?
A. 1.5 V
B. 6 V
C. 9 V
D. 36 V
Voltage is also defined as the electric pressure, potential difference or electric tension. Volt is the unit which is used to express the voltage or potential difference. Here the total voltage is 36V. The correct option is D.
The total work required to move a unit of charge between two points in a static electric field is defined as the voltage. It is the difference in the electric potential between two points.
The total voltage in a series connection is equal to the sum of all the individual voltage drops in the circuit.
V = 9 + 9 + 9 + 9 = 36V
Thus the correct option is D.
To know more about voltage, visit;
https://brainly.com/question/2364325
#SPJ1
Your question is incomplete most probably your full question was:
Four Alkaline D batteries of 9V are placed in series. What is the total voltage of the batteries?
A. 1.5 V
B. 6V
C. 9V
D. 36 V
The abbreviation SN2 is used to describe the mechanism of a particular reaction. The S denotes that the reaction is classified as a(n) _______ , while the N indicates that the reaction involves attack by a(n) . The number 2 _________ indicates that species is/are involved in the rate-determining step, which follows ________ -order kinetics in this case.
The word "substitution," represented by the letter S in the chemical formula SN2, denotes that one functional group is being replaced by another in the reaction. The letter N stands for "nucleophilic," suggesting that a nucleophile is attacking an electrophilic carbon atom in the process.
The nucleophile and the substrate are two of the species involved in the reaction's rate-determining phase, as shown by the two in SN2. In this instance, the reaction rate exhibits second-order kinetics, which states that it is proportional to the concentrations of the nucleophile and substrate.
Because the SN2 reaction is a bimolecular process, the rate of the reaction is inversely correlated with the concentrations of the nucleophile and substrate. Rate = k[Nu][R-X], where [Nu] is the concentration of the nucleophile and [R-X] is the concentration of the substrate, is the rate equation for the reaction.
The SN2 reaction mechanism, which is used in numerous synthetic processes, is a significant reaction in organic chemistry. It is frequently favored by primary alkyl halides, which have a carbon center that is largely unobstructed, and by potent nucleophiles that may effectively attack the carbon center.
To know more about the SN2 reaction refer here :
https://brainly.com/question/30631335#
#SPJ11
How to ensure recitifer is safe to touch
A) touch it
B) measure the AC input in the back
C) open the structure to check the meters
D) measure a case-to-ground voltage or use an instrument that detects AC voltage
Measuring the AC input in the back or measuring a case-to-ground voltage are safe and effective ways to ensure that a rectifier is safe to touch.
In order to ensure that a rectifier is safe to touch, one must take precautionary measures to avoid any potential electrical hazards. The first step is to turn off the power supply to the rectifier and disconnect it from any electrical source. Next, use a voltmeter to measure the AC input in the back of the rectifier. If the reading is above the safe limit, do not touch the rectifier and consult a professional technician to address the issue.
Another method is to measure a case-to-ground voltage or use an instrument that detects AC voltage. This will help determine if there is any stray current or voltage present that could be harmful. If the readings are within the safe range, then it is generally safe to touch the rectifier.
Opening the structure to check the meters is not recommended as this could expose one to live electrical components and pose a danger.
learn more about the rectifier Refer: https://brainly.com/question/14661951
#SPJ11
How many atoms are equal to 1. 5 moles of helium?
Therefore, there are 9.033 × [tex]10^{23[/tex] atoms in 1.5 moles of helium.
The number of atoms in a mole (6.02 1023) of any material. We must use the conversion factor to change the number of atoms to the number of moles: The mole, often known as mol, is a SI unit that counts the particles in a given material.
A fixed amount of atoms are measured in a mole. Mole conversions are possible for quantities like grammes and milligrammes. However, because a mole is the sum of all the atoms, it does not have a gramme or milligramme equivalent.
The number of atoms in a given amount of a substance can be calculated using Avogadro's number, which is equal to 6.022 × [tex]10^{23[/tex] particles per mole.
The number of atoms in 1.5 moles of helium, we can multiply the number of moles by Avogadro's number:
Number of atoms = 1.5 moles × Avogadro's number
Number of atoms = 1.5 moles × 6.022 × [tex]10^{23[/tex] atoms/mole
Number of atoms = 9.033 ×[tex]10^{23[/tex] atoms
Learn more about moles visit: brainly.com/question/29367909
#SPJ4
Consider the reactionHCl(g)+ NH3(g)NH4Cl(s)Using the standard thermodynamic data in the tables linked above, calculate the equilibrium constant for this reaction at 298.15K.
To calculate the equilibrium constant for the reaction HCl(g) + [tex]NH_{3}[/tex](g) → [tex]NH_{4}[/tex]Cl(s) at 298.15K using standard thermodynamic data, we need to use the equation:
ΔG° = -RTlnK
where ΔG° is the standard Gibbs free energy change for the reaction, R is the gas constant, T is the temperature in Kelvin, and K is the equilibrium constant.
Using the standard thermodynamic data for the formation of NH4Cl(s), HCl(g), and NH3(g) from their elements, we can calculate the standard Gibbs free energy change for the reaction as follows:
ΔG° = ΔG°f(NH4Cl) - [ΔG°f(HCl) + ΔG°f(NH3)]
ΔG° = (-314.42 kJ/mol) - [(-92.31 kJ/mol) + (-16.45 kJ/mol)]
ΔG° = -205.66 kJ/mol
Substituting the values into the equation above, we get:
-205.66 kJ/mol = -8.314 J/mol-K x 298.15 K x lnK
Solving for K, we get:
lnK = (-205.66 kJ/mol) / (-8.314 J/mol-K x 298.15 K)
lnK = 29.46
K = e^(29.46)
K = 1.29 x 10^12
Therefore, the equilibrium constant for the reaction HCl(g) + NH3(g) → NH4Cl(s) at 298.15K is 1.29 x 10^12.
Learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ11
Tin metal can be prepared by electrolysis of its aqueous saltsCobalt metal can be prepared by electrolysis of its aqueous saltsCadmium metal can be prepared by electrolysis of its aqueous saltsHydrogen can be prepared by suitable electrolysis of aqueous magnesium saltsHydrogen CANNOT be prepared by suitable electrolysis of aqueous zinc saltsHydrogen can be prepared by suitable electrolysis of aqueous aluminum saltsHydrogen CANNOT be prepared by suitable electrolysis of aqueous silver saltsBarium metal CANNOT be prepared by electrolysis of its aqueous saltsLead metal can be prepared by electrolysis of its aqueous saltsNitrogen CANNOT be prepared by electrolysis of an aqueous nitrate solutionOxygen can be prepared by suitable electrolysis of aqueous perchlorate saltsOxygen can be prepared by suitable electrolysis of aqueous nitrate saltsOxygen can be prepared by suitable electrolysis of aqueous oxide salts
Tin, cobalt, and cadmium metals can be prepared by electrolysis of their aqueous salts, while barium metal cannot be prepared by electrolysis of its aqueous salts.
Tin, cobalt, and cadmium can be prepared by electrolysis of their aqueous salts, hydrogen can be prepared by suitable electrolysis of aqueous magnesium and aluminum salts, but not by electrolysis of aqueous zinc and silver salts, barium metal cannot be prepared by electrolysis of its aqueous salts, lead metal can be prepared by electrolysis of its aqueous salts, nitrogen cannot be prepared by electrolysis of an aqueous nitrate solution, and oxygen can be prepared by suitable electrolysis of aqueous perchlorate, nitrate, and oxide salts.
Electrolysis is a process that uses an electric current to drive a chemical reaction. The electrolysis of aqueous salts of certain metals can produce those metals in their elemental form. However, not all aqueous salts can be electrolyzed to produce their corresponding metals. Similarly, electrolysis can be used to produce hydrogen and oxygen from certain aqueous salts, but not all of them. The ability to electrolyze certain compounds depends on their chemical properties and the conditions under which the electrolysis is performed.
To learn more about electrolysis, here
https://brainly.com/question/12054569
#SPJ1
Memorize the names and symbols of the first 20 elements in the periodic table &
24-30
35
53
54
37
38
55
56
Here's a list with the first 20 elements, elements 24-30, 35, 53, 54, 37, 38, 55, and 56:1. Hydrogen (H);2. Helium (He);3. Lithium (Li);4. Beryllium (Be);5. Boron (B);6. Carbon (C);7. Nitrogen (N);8. Oxygen (O);9. Fluorine (F);10. Neon (Ne);11. Sodium (Na);12. Magnesium (Mg);13. Aluminum (Al);14. Silicon (Si);15. Phosphorus (P);16. Sulfur (S);17. Chlorine (Cl);18. Argon (Ar);19. Potassium (K);20. Calcium (Ca).
24. Chromium (Cr);25. Manganese (Mn);26. Iron (Fe);27. Cobalt (Co);28. Nickel (Ni);29. Copper (Cu);30. Zinc (Zn);35. Bromine (Br);53. Iodine (I);54. Xenon (Xe);37. Rubidium (Rb);38. Strontium (Sr);55. Cesium (Cs);56. Barium (Ba)
To memorize these names and symbols, try making flashcards with the element name on one side and the symbol on the other side. Review them regularly, and quiz yourself by trying to recall the symbols when given the names, and vice versa.
learn more about Chromium Refer: https://brainly.com/question/681602
#SPJ11
PART OF WRITTEN EXAMINATION:
Anions:
A) are positively charged ions
B) have more protons than electrons
C) have more protons neutrons
D) are negatively charged ions
Anions are negatively charged ions that have more electrons than protons.
An ion is an atom or molecule that has a net electrical charge due to the loss or gain of one or more electrons. An atom can lose or gain electrons to form an ion, depending on whether it has fewer or more electrons than protons. When an atom gains electrons, it becomes a negatively charged ion called an anion, and when it loses electrons, it becomes a positively charged ion called a cation.
Anions are negatively charged ions that have more electrons than protons. This gives them a net negative charge. For example, the chloride ion (Cl-) is an anion that forms when a chlorine atom gains an electron. The extra electron gives the atom a net negative charge, making it an anion.
Anions play an important role in many chemical reactions and biological processes. For example, anions such as chloride, bicarbonate, and phosphate are essential components of many important molecules in the body, such as DNA, RNA, and ATP. They also help to maintain the balance of electrolytes in the body, which is important for many physiological processes, such as muscle contraction and nerve function.
In summary, anions are negatively charged ions that have more electrons than protons. They are formed when an atom or molecule gains one or more electrons, giving it a net negative charge. Anions play important roles in many chemical and biological processes in the body.
Visit to know more about Anions:-
brainly.com/question/11896031
#SPJ11
In a water molecule,
A. the oxygen atom is more electronegative than the hydrogen atoms.
B. the oxygen atom has an overall negative charge with the hydrogen atoms having an overall positive charge.
C. unequal sharing of electrons results in a polar molecule.
D. All of the choices are correct.
In a water molecule, all of the choices are correct.
A. The oxygen atom is more electronegative than the hydrogen atoms, meaning that it has a stronger attraction to shared electrons in the covalent bond.
B. Due to the higher electronegativity of the oxygen atom, it attracts the shared electrons more, resulting in a partial negative charge on the oxygen atom. The hydrogen atoms, on the other hand, have a partial positive charge due to the unequal sharing of electrons.
C. The unequal sharing of electrons in a water molecule leads to its polar nature. A polar molecule has a separation of charge, with one end being more negative and the other end being more positive. This polarity enables water molecules to engage in hydrogen bonding, a type of intermolecular force, which contributes to water's unique properties, such as high boiling and melting points, surface tension, and its ability to dissolve a wide range of substances.
Learn More about molecule here :-
https://brainly.com/question/30401694
#SPJ11
which one of the following substances will give an aqueous solution of ph closest to 7? group of answer choices a.nh3 b.nh4i c.kno3 d.co2 e.ch3nh2
The component in option (c) KNO₃ will produce an aqueous solution with a pH value that is the closest to 7.
What is pH?The H+ ion concentration's negative logarithm is known as pH. As a result, the meaning of pH is justified as the strength of hydrogen.
Out of the given options, the substance that will give an aqueous solution of pH closest to 7 is (c) KNO₃.
KNO₃ is a salt that is formed from a strong base (KOH) and a strong acid (HNO₃). When this salt is dissolved in water, it undergoes complete dissociation to form K⁺ and NO₃⁻ ions.
Both K+ and NO₃⁻ ions are neutral and do not affect the pH of the solution. Therefore, the pH of an aqueous solution of KNO₃ will be close to 7, which is neutral pH.
On the other hand, options (a) NH₃, (b) NH₄I, (d) CO₂, and (e) CH₃NH₂, are weak bases or weak acids that will affect the pH of the aqueous solution. These substances will cause the solution to be basic or acidic, depending on the strength of the base or acid.
Learn more about pH on:
https://brainly.com/question/26424076
#SPJ11
why is the city government adding all.these new policies?
Policies are defined as the rules, principles, guidelines or frameworks which are adopted or designed by an organization to achieve the long term goals. Policies may not include procedures or supplemental information.
The government make policies to take action against the complications. The policies made by the government fulfil the future obligations or requirements of the economy. It is the Monetary policy which regulates the interest rates, money supply, etc.
Fiscal policy makes adjustments in the tax rates, monitor a nation's economy, credit availability, etc.
To know more about policies, visit;
https://brainly.com/question/30104789
#SPJ1
PART OF WRITTEN EXAMINATION:
A ____ is used to record information while taking the surveys
A) key logger
B) trojan
C) phase inverter
D) data logger
E) Oscope
The correct answer for the given question is D) data logger. A data logger is a device that is used to record information while taking surveys. It is a useful tool in many fields, including environmental science, agriculture, and engineering, where it is necessary to collect and record data over a period of time.
Data loggers are portable, easy to use, and capable of recording a wide range of information, such as temperature, humidity, pressure, and voltage.During the survey process, a data logger can be connected to various sensors to collect and record data. The data collected can then be used for analysis, research, and decision-making purposes. It is essential to choose the right data logger for a specific survey project to ensure accurate and reliable results.
In conclusion, a data logger is an essential tool for recording information during surveys. It provides accurate and reliable data, making it a crucial part of any survey process.
learn more about pressure Refer: https://brainly.com/question/18431008
#SPJ11
why is the electron configuration of cr metal not 3d4 4s2? group of answer choices because cr has more than 6 electrons in its valence. because 3d orbitals are lower in energy than 4s orbitals. because electrons repel each other and a different configuration allows each electron to have its own orbital (which is more stable). none of these.
The electron configuration of chromium (Cr) is actually 3d5 4s1, not 3d4 4s2 as one would expect based on the filling order of orbitals. This is due to a phenomenon called the "Aufbau principle," which states that electrons will always fill the lowest energy orbital available before filling higher energy orbitals.
In the case of chromium, the 3d orbital is actually slightly lower in energy than the 4s orbital, meaning that one electron fills the 4s orbital first, followed by five electrons in the 3d orbital. This is known as a "half-filled d subshell," which is particularly stable due to the exchange energy associated with electron-electron repulsion.
It is important to note that the electron configuration of an element is determined by the observed behavior of electrons in that element, not by any preconceived notions or rules. Therefore, while the filling order of orbitals can be predicted based on theoretical models, the actual observed electron configuration may deviate from these predictions due to various factors, including the relative energies of different orbitals.
for more such questions on chromium
https://brainly.com/question/30163849
#SPJ11
Open Odyssey, go to the Labs tab, find the Acids & Bases section and click on LK1 Strong Acids. Click on the plot icon () on the top tool bar. Click on + Add Plot, choose XY Plot. For the X-Axis, choose Distance. For the Y-Axis, choose Partial (Atomic) Charge. Click Next > Scatter Plot and then Finish With Hydroiodic Acid chosen click on the y axis and then click on the purple iodine atom. Then click on on the x-axis and click on both the hydrogen and iodine atom. Click on the Record button. Repeat this process for Hydrobromic and Hydrochloric Acid. Which of the following statements are true? - The partial atomic charge of the anion is inversely related to the HX bond length - The partial atomic charge measures the charge on the hydrogen atom - Acid strength increases with the charge of the anion connected to the acidic hydrogen - Only Hl is shown completely disocciated - The H-X bond length increases with acid strength.
Regarding the statements about Acids & Bases and Hydrobromic Acid, here's an analysis of their validity:
1. The partial atomic charge of the anion is inversely related to the HX bond length: True. As the bond length increases, the partial atomic charge on the anion decreases, indicating weaker bonding between the hydrogen and halogen atoms.
2. The partial atomic charge measures the charge on the hydrogen atom: False. The partial atomic charge measures the charge distribution within the molecule, not just on the hydrogen atom.
3. Acid strength increases with the charge of the anion connected to the acidic hydrogen: True. A higher charge on the anion implies a stronger attraction to the hydrogen atom, resulting in a stronger acid.
4. Only HI is shown completely dissociated: I cannot confirm this statement without interacting with the Open Odyssey platform.
5. The H-X bond length increases with acid strength: False. In fact, the opposite is true. As the acid strength increases, the H-X bond length generally decreases.
To know more about the Hydrobromic Acid refer here :
https://brainly.com/question/15231576#
#SPJ11
provide the structure of the major organic product in the substitution reaction of 3-iodocyclopentene with water.
The substitution reaction of 3-iodocyclopentene with water involves the replacement of the iodine atom with a hydroxyl group (-OH) to form an alcohol product.
Under neutral or slightly basic conditions, the major product formed is 3-hydroxycyclopentene. The reaction proceeds via an intermediate carbocation, which is formed by the departure of the iodine atom. The carbocation undergoes a hydride shift to give a more stable tertiary carbocation intermediate.
Finally, a water molecule attacks the carbocation to form the 3-hydroxycyclopentene product. The structure of the major organic product, 3-hydroxycyclopentene, features a hydroxyl group (-OH) attached to the carbon atom that was originally bonded to iodine in 3-iodocyclopentene.
Learn more about substitution reaction
https://brainly.com/question/30239668
#SPJ4
A reaction where one entity replaces another in a molecule is called___
The type of reaction where one entity replaces another in a molecule is called a substitution reaction. This type of reaction involves the replacement of an atom or a functional group in a molecule with another atom or functional group.
The substitution reaction can occur in organic or inorganic molecules, and it can be initiated by a variety of factors, such as light, heat, or a catalyst.In a substitution reaction, a molecule undergoes a change in its chemical composition, as one atom or group is replaced by another. This can result in the formation of a new molecule with different physical and chemical properties. The substitution reaction is a fundamental process in organic chemistry, as it allows for the synthesis of a wide range of compounds, from drugs to polymers.The mechanism of a substitution reaction can vary depending on the type of reaction and the nature of the molecules involved. For example, in a nucleophilic substitution reaction, a nucleophile attacks an electrophilic center in a molecule, resulting in the replacement of a leaving group. In an electrophilic substitution reaction, an electrophile attacks a nucleophilic center in a molecule, leading to the substitution of a hydrogen atom.Overall, substitution reactions play a crucial role in the synthesis and modification of molecules, and they are essential for the development of new materials, drugs, and technologies.
Learn more about molecule here
https://brainly.com/question/24191825
#SPJ11
At 25°C, HI breaks down very slowly to form H2 and I2. The rate law is given by rate = k[HI]2 and k at 25°C is 2.4 à 10-21 L/molâs. If 0.0100 mol of HI (g) is placed in a 1.0-L container, how long will it take for the concentration of HI to reach 0.00900 mol/L?
It will take about 19.8 quadrillion years for the concentration of HI to reach 0.00900 mol/L. This is much longer than the current age of the universe.
The first step is to use the rate law to find the initial rate of the reaction. Since the concentration of HI is 0.0100 mol/L in the beginning, we can plug this value into the rate law:
rate = k[HI]2
rate = (2.4 x 10^-21 L/mol·s) x (0.0100 mol/L)^2
rate = 2.4 x 10^-27 mol/(L·s)
This means that at the beginning of the reaction, the concentration of HI is decreasing at a rate of 2.4 x 10^-27 mol/(L·s).
Next, we can use the integrated rate law for a second-order reaction to find how long it will take for the concentration of HI to reach 0.00900 mol/L. The integrated rate law is:
1/[HI] - 1/[HI]0 = kt
Where [HI]0 is the initial concentration of HI, [HI] is the concentration at time t, k is the rate constant, and t is time. Rearranging this equation gives:
t = [1/[HI] - 1/[HI]0]/k
Plugging in the values we know, we get:
t = [1/0.00900 - 1/0.0100]/(2.4 x 10^-21 L/mol·s)
t = 6.25 x 10^23 s
This is a very long time! To convert it to a more reasonable unit, we can divide by the number of seconds in a year:
t = 1.98 x 10^16 years
So, it will take about 19.8 quadrillion years for the concentration of HI to reach 0.00900 mol/L. This is much longer than the current age of the universe!
to learn more about integrated rate law click here:
brainly.com/question/30379408
#SPJ11
You are tasked to make 2 mL of tobramycin 8% solution. You calculate that you need to use 1 mL of tobramycin 16% stock solution to make it. How much diluent will you need to use?
Select one:
1 mL
2 mL
3 mL
4 mL
We need to use 1 mL of diluent to make a 2 mL of tobramycin 8% solution using 1 mL of tobramycin 16% stock solution.
To prepare 2 mL of tobramycin 8% solution using 1 mL of tobramycin 16% stock solution, follow these steps:
1. Determine the total amount of tobramycin needed in the 8% solution: 2 mL x 8% = 0.16 g
2. Calculate the amount of tobramycin present in the 1 mL of 16% stock solution: 1 mL x 16% = 0.16 g
3. Compare the tobramycin amounts in the desired solution and the stock solution. In this case, they are equal (0.16 g), meaning you can achieve the desired concentration by diluting the stock solution.
4. To determine the amount of diluent needed, subtract the volume of the stock solution from the desired final volume: 2 mL (final volume) - 1 mL (stock solution) = 1 mL
So, you will need to use 1 mL of diluent to make 2 mL of tobramycin 8% solution. Your answer: 1 mL.
learn more about tobramycin Refer: https://brainly.com/question/30456364
#SPJ11
Answer all questions
Coordinate
1. The activation energy for the reaction is 30 KJ
2. The change in energy for the reaction is -20 KJ
3. The reaction is exothermic
4. The letter that represents the products is B
5. The letter that represents the reactants is A
How do i determine the activaition energy?We know that activation energy is the minimum energy required for a reaction to occur.
Thus, the activation energy for the reaction can be obtain as shown below:
Energy of reactant = 40 KJPeak energy = 70 KJActivation energy = ?Activation energy = Peak energy - Energy of reactant
Activation energy = 70 - 40
Activation energy = 30 KJ
How do i determine the change in energy?The change in energy is simply the difference in the energy of the product and reactant. This can be obtained as follow:
Energy of reactant = 40 KJEnergy of product = 20 KJChange in energy = ?Change in energy = Energy of product - energy of reactant
Change in energy = 20 - 40
Change in energy = -20 KJ
How do i know the type of reaction?From the diagram, the energy of the product is lesser than the energy of the reactant. Hence, the change in energy is negative (i.e -20 KJ).
Thus, we can conclude that the reaction is exothermic reaction.
How do i know which letter represents product and reactants?The letter which represents products in the diagram is letter B
The letter which represents reactants in the diagram is letter A
Learn more about activation energy:
https://brainly.com/question/29060218
#SPJ1
pH = 10.88
what is the OH-
Answer:
The pH of a solution is defined as the negative logarithm (base 10) of the concentration of hydrogen ions [H+]. The concentration of hydroxide ions [OH-] can be calculated using the equation Kw = [H+][OH-], where Kw is the ion product constant for water, which is equal to 1.0 × 10^-14 at 25°C.
To find the [OH-] of a solution with pH 10.88, we first find the [H+]:
pH = -log[H+]
10.88 = -log[H+]
[H+] = 10^(-10.88) = 1.4 × 10^(-11) M
Now we can calculate the [OH-]:
Kw = [H+][OH-]
1.0 × 10^-14 = (1.4 × 10^-11)[OH-]
[OH-] = (1.0 × 10^-14) / (1.4 × 10^-11) = 7.1 × 10^-4 M
Therefore, the [OH-] of the solution is 7.1 × 10^-4 M.
Explanation:
use a ratio of the two values of kobsd to determine the order in tpp. recall that we increased the conc. of tpp by a factor of 5 from first trial to second trial. see question 7 of prelab assignment as a guide.
To determine the order in TPP, we need to analyze the change in the observed rate constant (kobs) when the concentration of TPP is increased by a factor of 5 from the first trial to the second trial.
Let's denote the kobs values for the first and second trials as kobs1 and kobs2, respectively. Calculate the ratio of the two kobs values:
Ratio = kobs2 / kobs1
Now, compare this ratio to the factor by which the concentration of TPP increased (which is 5). If the ratio is equal to the factor raised to the power of the reaction order (n), then we can determine the order in TPP:
Solve for 'n' to find the order of the reaction in TPP.
Thiamine (vitamin B1) is a precursor of thiamine diphosphate (ThDP), a well-known coenzyme of central metabolic pathways. The vital importance of thiamine for neuronal activities is established by the requirement for ThDP-dependent enzymes in highly intensive glucose oxidation in the brain. A number of enzymes, including transketolase, pyruvate dehydrogenase, and -ketoglutarate dehydrogenase, require the cofactor thiamin pyrophosphate (TPP). In numerous enzymatic processes, including Pyruvate dehydrogenase complex, TPP functions as a coenzyme. in the production of ethanol, pyruvate decarboxylase.
Learn more about coenzyme here
https://brainly.com/question/28098005
#SPJ11
What does the line from time 6 to 10 indicate?
Correct options are: Beth went back toward her origin. Beth speed up considerably. Using the concept of speed of the object the line from time 6 to 10 indicate
What is speed of the object?Velocity is the pace and direction of an item's movement, whereas speed is the time rate at which an object is traveling along a route. To put it another way, velocity is a vector, whereas speed is a scalar value.
The amount of distance an item travels in one unit of time is known as its speed. Another name for rate is speed. A rate reveals how much something happens or changes in a given length of time. speed of the object is defined as the slope of the position time graph
here we know that
initially it moves from t = 0 to t = 6 from x = 2 to x = 8
so the slope is given as:
v = (x₂ - x₁) / (t₂ - t₁)
v = (8 - 2) / (6 - 0)
v = 1 m/sec
similarly for next we have
again it comes to x = 0 after t = 10 s
so the speed is:
v₂ = (x₃ - x₂) / (t₃ - t₂)
v₂ = (0 - 8) / (10 - 6)
v₂ = - 2 m/sec
so here the velocity is negative which shows that it will move in reverse direction also its velocity is also increase
so correct answers are:
Beth went back toward her origin.
Beth speed up considerably.
To know more about speed of the object refer to:
brainly.com/question/29725219
#SPJ4
The complete question is as follows:
The graph is the path Beth took on a walk.
A graph with horizontal axis time (seconds) and vertical axis position in (meters). The line runs in 2 straight segments from 0 seconds 2 meters to 6 seconds 8 meters to 10 seconds 0 meters.
What does the line from time 6 to 10 indicate?
Beth slowed down considerably.
Beth went back toward her origin.
Beth sped up considerably.
Beth went farther away from origin.h expression is equivalent to
Classify each statement or molecule as a polar bond or nonpolar bond. You are currently in a sorting module. Turn off browse mode or quick nav, Tab to items, Space or Enter to pick up, Tab to move, Space or Enter to drop. Polar bonds the bond between oxygen and hydrogen in water (H2OH2O) the bond between nitrogen atoms in diatomic nitrogen (N2N2) Nonpolar bonds electrons are not equally shared by the atoms in a covalent bond one atom has a partial negative charge, and the other atom has a partial positive charge electrons are equally shared between atoms in a covalent bond
The bond between oxygen and hydrogen in water (H2O) is a polar bond because oxygen is more electronegative than hydrogen, causing the electrons to be unevenly shared and resulting in a partial negative charge on the oxygen and a partial positive charge on the hydrogen.
The bond between nitrogen atoms in diatomic nitrogen (N2) is a nonpolar bond because the atoms are identical and therefore have an equal pull on the shared electrons, resulting in an even distribution of charge. The statement "electrons are not equally shared by the atoms in a covalent bond, one atom has a partial negative charge, and the other atom has a partial positive charge" describes a polar bond, while the statement "electrons are equally shared between atoms in a covalent bond" describes a nonpolar bond.
The strongest covalent bonds are quadruple covalent bonds. The bond gets stronger the more bonding partners there are.
The sharing of electrons between two species creates a covalent connection.
They frequently exist between molecules with comparable electronegativities.
The strength of the bonds between the atoms is based on their quantity.
Learn more about covalent bond here
https://brainly.com/question/19382448
#SPJ11
Directions: Calculate the percent composition of each element in the following
compounds.
1) sodium phosphate, Na,PO,?
2) hydrogen peroxide, H₂O₂?
3) carbon dioxide, CO₂?
4) calcium sulfate dihydrate, CaSO, 2H₂O?
5) glucose, C₂H₁₂O₂?
6) aspirin, C,H,O,?
PLEASE SHOW WORK
Answer:
1. 42.1% sodium, 18.9% phosphorus and 39% oxygen.
2.94.07 percent oxygen and 5.93 percent hydrogen.
3.72.71 percent oxygen and 27.29 percent carbon.
4.CaSO4•2H2O has an accepted value of 20.9%.
5.40.00 percent C,6.73 precent H, 53.28 precent O.
6. 60.0% carbon and 35.5% Oxygen.
Explanation:
you find it by dividing the molar mass of the element times the number of that element over the molar mass of the compound then times by 100
Suppose there are two voltaic cells. Cell A operates at 1 V and cell B operates at 2 V. Which of the following is true if the same electrical motor is attached to the two cells? Circle the correct answer and briefly explain your reasoning.
1.Cell A produces a greater amount of work per mol of electrons than cell B.
2.Cell B produces a greater amount of work per mol of electrons than cell A.
3.Both cell A and cell B produce the same amount of work per mol of electrons.
The correct answer is 2. Cell B produces a greater amount of work per mol of electrons than cell A.
Cell B produces a greater amount of work per mole of electrons than cell A because the amount of work done by a voltaic cell is directly proportional to the voltage of the cell. Since cell B operates at a higher voltage than cell A, it will produce more work per mole of electrons. The amount of work done by a cell can be calculated using the equation: work = voltage x mole of electrons. Therefore, cell B is the voltaic cell which will do more work per mole of electrons than cell A.
Learn more about voltaic cell : https://brainly.com/question/29748572
#SPJ11
What is the molarity of a solution that was prepared by dissolving 70.0 g of MgCl (molar
mass = 94.0 g/mol) in enough water to make 342 mL of solution?
I need the steps…
We must first determine how many moles of solute are in a solution in order to compute the molarity of the solution. To do this, divide the solute's mass, 70.0 g, by its molar mass, 94.0 g/mol.
MgCl, 0.743 moles, are the result. Next, we must determine the solution's overall volume, which comes to 342 mL. Since there are 1000 mL in a litre, we may multiply 342 mL by 0.001 to convert this to litres. This produces 0.34 L.
By dividing the entire volume of the solution, 0.342 L, by the number of moles of MgCl, 0.743, we may finally get the solution's molarity. A molarity of 2.17 M is the result.
Learn more about volume at:
https://brainly.com/question/1578538
#SPJ1
which of the following best describes the bonds between cu2 and the nitrogen atoms of the ammonia molecules in [cu(nh3)4]2 ? a.ionic b.covalent c.coordinate ionic d.coordinate covalent
The bonds between[tex]Cu_2[/tex]and the nitrogen atoms of the ammonia molecules in[tex][Cu(NH_3)_4]_2[/tex] are coordinate covalent bonds.
The atom that shares an electron pair with itself in this sort of bonding is known as the donor.
A receptor or acceptor is the atom that receives this shared pair of electrons.
An arrow denoting the bond is shown as coming from the donor atom and pointing in the direction of the acceptor.
Each atom becomes stable after the sharing of electron pair.
The Lewis theory's foundational type of bonding is this one.
Co-ordinate covalent bonds can be more effectively designed by having a solid understanding of them.
The best description for the bonds between [tex]Cu_{2+[/tex] and the nitrogen atoms of the ammonia molecules in [tex][Cu(NH_3)_4]_{2+[/tex] is (d) coordinate covalent. This is because the nitrogen atoms in the ammonia molecules donate a pair of electrons to the central copper ion, forming a coordinate covalent bond.
learn more about coordinate covalent bonds.
https://brainly.com/question/12857081
#SPJ11
How to Write the Name for Ionic Compounds
ex Sodium plus fluoride
Ionic compounds typically consist of a metal (cation) and a non-metal (anion) element, and they form a strong bond due to the transfer of electrons.
To write the name of ionic compounds, follow these steps:
1. Identify the cation (positive ion) and anion (negative ion) in the compound. In your example, sodium is the cation and fluoride is the anion.
2. Write the name of the cation first, which is "sodium" in this case.
3. Next, write the name of the anion, but replace the ending with "-ide." For fluoride, it becomes "fluoride."
4. Combine the names of the cation and anion. In this example, the ionic compound's name is "sodium fluoride."
Remember that ionic compounds typically consist of a metal (cation) and a non-metal (anion) element, and they form a strong bond due to the transfer of electrons.
Visit here to learn more about fluoride :
brainly.com/question/3795082
#SPJ11
Which of the following statements is true concerning acids and bases?
1-acids mixed with bases neutralize each other
2-acids mixed with bases make stronger acids
3-acids mixed with bases make stronger bases
4-acids and bases don't react with each other
The true statement about acids and bases is; acids mixed with bases neutralize each other. Option 1 is correct.
When an acid reacts with a base, they undergo a chemical reaction called neutralization, resulting in the formation of water and a salt. The hydrogen ions (H⁺) from the acid react with the hydroxide ions (OH⁻) from the base to form water (H₂O), while the remaining ions from the acid and the base combine to form a salt.
The neutralization reaction between acids and bases results in the formation of a neutral solution, with a pH close to 7. This is because the acidic and basic properties of the original substances are cancelled out or neutralized by each other.
Hence, 1. is the correct option.
To know more about neutralization here
https://brainly.com/question/15347368
#SPJ1