Definition of main energy level

Answer:

kg - one thousand grams; the basic unit of mass adopted under the Systeme International d'Unites; "a kilogram is approximately 2.2 pounds"

Explanation:

This question is asking for five different questions about density, mass and volume which can be all summarized with the following definition of density as the degree of compactness of the objects taken into consideration:

[tex]\rho =\frac{m}{V}[/tex]

In such a way, we can proceed as follows:

15. the mass is given as 42 g and the volume can be found by multiplying the given dimensions:

[tex]V=2cm*6cm*7cm=84 cm^3[/tex]

And the density turns out to be:

[tex]\rho =\frac{42g}{84cm^3}=0.5 g/cm^3[/tex]

16. both mass and density are given as 17 g and 120 g/mL respectively, so that we have to solve for the volume as shown below:

[tex]V=\frac{m}{\rho} =\frac{17g}{120g/mL} =0.14 mL[/tex]

17. the mass is given as 23 g and the volume as 123 mL, so that the density is calculated as shown below:

[tex]\rho=\frac{23g}{123 mL} =0.19 g/mL[/tex]

Which can be converted to kg/mL as follows:

[tex]0.19\frac{g}{mL} *\frac{1kg}{1000g}=0.00019 kg/mL[/tex]

18. the mass is given as 45 g and the density as 240 g/cm³, so we can solve for the volume as follows:

[tex]V=\frac{m}{\rho} =\frac{45g}{240g/cm^3}=0.19 cm^3[/tex]

19. In this case, since the water has lower density than the object, we can infer that the latter is heavier than the former, this means that the object will sink according to the Archimedes principle.

Learn more:

Answer:

47.48 J/g/K or 4.74 × 10⁴J/Kg/K

Explanation:

C(specific heat capacity)= Q(quantity of heat)/M(mass) × ∆T(change in temperature, Kelvin)

Q= 8000J

M= 46g or 46 ×10^-3Kg

T1= 24°C = 297K

T2 = 28°C = 301K

∆T = 301-297

= 4K

C= 8000/46 × 4

= 47.48 J/g/K or 4.74 × 10⁴J/Kg/K

[tex]\\ \sf\Rrightarrow F=ma[/tex]

[tex]\\ \sf\Rrightarrow \dfrac{F}{a}=m[/tex]

Or

[tex]\\ \sf\Rrightarrow m=\dfrac{F}{a}[/tex]

Answer:

30 m/s.

Explanation:

The final speed of the combined masses is 0.21 m/s

Applying the law of conservation of momentum:

Total momentum before collision = Total momentum after collision.

⇒ Formula:

MU+mu = V(M+m).................. Equation 1

⇒ Where:

From the question,

⇒ Given:

⇒ Substitute these values into equation 1

⇒ Solve for V

Hence the final speed of the combined masses is 0.21 m/s

Learn more about speed here: https://brainly.com/question/4931057

The same formula of work can be applied to all the questions. The answers are:

E1. 100J

E2. 40N

E3. 5m

E4. a.) 360 J           b.) 240 J               c.) 120 J

El. If a horizontally directed force of 40 N is used to pull a box a distance of 2.5 m across a tabletop. The formula to get the much work that will be done by the 40 - N force will be

Work done = force x distance

Work done = 40 x 2.5

Work done = 100 J

E2. If a woman does 160 J of work to move a table 4 m across the floor. We will use the same formula to calculate the magnitude of the force that the woman applied to the table assuming the force is applied in the horizontal direction.

Work done = force x distance

160 = 4F

F = 160/4

Force F = 40 N

E3. Given that a force of 60 N used to push a chair across a room does 300 J of work. Same formula to get how far the chair move in this process.

Work done = force x distance

300 = 60 x distance

distance = 300/60

Distance = 5 m

Therefore, the chair moved 5m away.

E4. Given that a rope applies a horizontal force of 180 N to pull a crate a distance of 2 m across the floor. And a frictional force of 120 N opposes this motion.

a. The work done by the force applied by the rope can  be found by

W = F x S

W = 180 x 2

W = 360 J

b. What is the work done by the frictional force?

W = [tex]F_{r}[/tex] x s

W = 120 x 2

W = 240 J

c. What is the total work done on the crate?

W = (F - [tex]F_{r}[/tex]) x distance

Where  [tex]F_{r}[/tex]  = frictional force

Substitute all the parameters

W = (180 - 120) x 2

W = 60 x 2

W = 120 J

Learn more about work here: https://brainly.com/question/8119756

Hi there!

I. They are the same.

Due to the Conservation of Momentum, an explosion as such means that the TOTAL momentum of the system (all of the pieces) is conserved.

Answer:

They are kg * m/s.

The unit of the momentum p would be kg × m/s..

Momentum is defined as the ability or tendency of an object to continue moving.

Also momentum is the product of mass and velocity. It can be shown as follows;

p = m × v

where,    

p = momentum

m = mass

v = velocity

Thus, we can conclude that the formula p = mv show the relationship between momentum, mass, and velocity.

Now the unit of the momentum p would be;

p = m × v

p = kg × m/s

Hence, the unit of the momentum p would be kg × m/s.

Learn more about the momentum here;

https://brainly.com/question/9073119

#SPJ2

Answer:

0.60N along the line tangent to the circle

Answer:

A is the answer

Explanation:

Just got finished with the quiz! Hope this helps <3

The minimum  speed that the second swimmer must have in order to catch up with the first swimmer by the end of the  pool is; 4.04 m/s

We are given the following facts;

Formula for time taken is;

time = distance/speed

Time taken by swimmer 1 for one leg;

t₁ = 50/3.9

t₁ = 12.82 s

Since swimmer 1 has a head start of 0.45 s, then time that swimmer 2 must use in order to catch up is;

t₂ = 12.82 -0.45

t₂ = 12.37 s

Thus, speed of swimmer 2;

v = 50/12.37

v = 4.04 m/s

Read more about distance, speed and time at; https://brainly.com/question/24571540

Answer:

Explanation:

Equipment manufactured by LECO(8 Corporation, St. Joseph, Michigan is warranted free from defect in material

and workmanship for a period of six months from the date of purchase. Equipment not manufactured by LECO is

covered to the extent of warranty provided by the original manufacturer and this warranty does not cover any

equipment, new or used, purchased from anyone other than the LECO Corporation. All replacement parts shall

be covered under warranty for a period of thirt days from date of purchase. LECO MAKES NO OTHER

REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESSED OR IMPLIED, WITH RESPECT TO

THE GOODS SOLD HEREUNDER, WHETHER AS TO MERCHANTABILITY, FITNESS FOR PURPOSE, OR

OTHERWISE.

Expendable items such as crucibles, combustion tubes, chemicals and items of like nature are not covered by

this warranty.

LECO's sole obligation under this warranty shall be to repair or replace any part or parts which, to our

satisfaction, prove to be defective upon return prepaid to LECO Corporation, St. Joseph, Michigan. This

obligation does not include labor to install replacement parts, nor does it cover any failure due to accident, abuse,

neglect, or use in disregard of instructions furnished by LECO. In no event shall damages for defective goods

exceed the purchase price of the goods, and LECO SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES WHATSOEVER.

All claims in regard to the parts or equipment must be made within ten (10) days after Purchaser learns of the

facts upon which the claim is based. Authorization must be obtained from LECO prior to returning any other

parts. This warranty is voided by failure to comply with these notice requirements.

NOTICE

The warranty on LECO equipment remains valid only when genuine LECO replacernent parts are employed.

Since LECO has no control over the quality or purity of consumable products not manufactured by LECO, the

specifications for accuracy of results using LECO instruments are not guaranteed unless genuine LECO

consumables are employed in conjunction with LECO instruments. If purchaser defaults in making payment for

any parts or equipment, this warranty shall be void and shall not apply to such parts and equipment. No late

payment or cure of default in payment shall extend the warranty period provided herein.

LECO Corporation is not responsible for damage to any associated instruments, equipment or apparatus nor wil

LECO be held liable for loss of profit or other special damages resulting from abuse, neglect, or use in disregard

of instructions. The Buyer, their employees, agents and successors in interest assume all risks and liabilities for

the operation, use and/or misuse of the product(s) described herein and agree to indemnify, hold harmless and

defend the seller from any and all claims and actions arising from any cause whatsoever, including seller's

negligence for personal injury incurred in connection with the use of said product(s) and any and all damages

proximately resulting therefrom.

CAUTION

The instrument should be operated only by technically qualified individuals who have fully read and understand

these instructions. The instrument should be operated only in accordance with these instructions.

The operator should follow all ,of the warnings and cautions set forth in the manual and the operator should follow

and employ all applicable standard laboratory safety procedures.

LECO'" is a registered trademark of the LECO Corporatio

Answer:

96.5 mL

Explanation:

Answer: answer is c rest of explanation is in the comments

Answer Body mechanics is a term used to describe the ways we move as we go about our daily lives. It includes how we hold our bodies when we sit, stand, lift, carry, bend, and sleep. ... Good body mechanics means using the body's strength to the best mechanical advantage to do a task efficiently and without injury.

Explanation:

Answer:

Explanation:

Centrifugal force Fc = m x v2 / r

Weight  = mg

As required by the question

Fc = W

v2 /r = g

given radius r = 22 m

v2 /22 = 9.8

Solve for v

required speed v = √(22 * 9.8)

= 14.35 m/s

v=15 m/s

this may help you

The force of the wall on the box equals the weight of the box when you drive with a speed of 14.68 m/s.

The centrifugal force can be described as an inertial force that appears to act on all objects in a rotating frame of reference. This force is directed away from an axis that is parallel to the axis of rotation and passes through the coordinate system's origin.

The magnitude of centrifugal force of mass m at the distance r from the origin rotating with angular velocity ω is:

[tex]{\displaystyle F=m\omega ^{2}r}[/tex]

Given, the radius of the curve, r = 22m

The acceleration, a = v²/r

The weight of the box, W = mg

We know that, F = ma

mg = m(v²/r)

v = √gr

[tex]\displaystyle v =\sqrt{9.8 \times 22}[/tex]

v = 14.68 m/s

Therefore, you should drive at a speed of 14.68 m/s

Learn more about centrifugal force, here:

https://brainly.com/question/17167298

#SPJ2

Answer:

electrons

Explanation:

because it electrons

Answer:

180 [J].

Explanation:

1) the required work [W] can be calculated as difference of the energy: W=E₂-E₁, where E₁=mgh₁ - the energy before lifting, E₂=mgh₂ - the energy after lifting;

2) W=mgh₂-mgh₁, where m - mass; g=10 [N/kg], h - height;

3) then the required work [W]:

W=mg*(h₂-h₁)=30*6=180 [J].

As car is avoid skidding

[tex]\\ \sf\hookrightarrow \dfrac{mv^2}{r}=\mu mg[/tex]

[tex]\\ \sf\hookrightarrow \dfrac{v^2}{r}=\mu g[/tex]

[tex]\\ \sf\hookrightarrow v^2=\mu rg[/tex]

[tex]\\ \sf\hookrightarrow v^2=0.6(10)(150)[/tex]

[tex]\\ \sf\hookrightarrow v^2=60(150)[/tex]

[tex]\\ \sf\hookrightarrow v^2=900[/tex]

[tex]\\ \sf\hookrightarrow v=30ms^{-1}[/tex]

Done

The minimum velocity of the with which the car driver must traverse the flat curve to avoid skidding is 29.7 m/s.

The given parameters:

The minimum velocity of the with which the car driver must traverse the flat curve to avoid skidding is calculated as follows;

[tex]\frac{mv^2}{r} = \mu mg\\\\v^2 = \frac{\mu mgr}{m} \\\\v^2 = \mu gr\\\\v = \sqrt{\mu gr} \\\\v = \sqrt{0.6 \times 9.8 \times 150} \\\\v = 29.7 \ m/s[/tex]

Thus, the minimum velocity of the with which the car driver must traverse the flat curve to avoid skidding is 29.7 m/s.

Learn more about banked roads here: https://brainly.com/question/14777525

Answer:

Astronomers think there are between 1.1 and 1.9 million asteroids in the solar system.

Explanation:

did you end up getting the answer- im struggling

Answer:

I would think human error could cause differences like not pressing the stop watch on time.

Explanation:

Explanation:

c. if the vector is oriented at 0° from the X -axis.

Answer:

Since the gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force. So as the mass of either object increases, the force of gravitational attraction between them also increases.

Answer:

thanks

Explanation:

for answer byebye

The time for the projectile to hit the ground from the given position is 1.5 s.

The given parameters:

The time for the projectile to hit the ground is calculated as follows:

when the projectile hits the ground, the final velocity = 0

[tex]v_f = 0\\\\\frac{dh(t)}{dt} = v_f\\\\\frac{dh(t)}{dt} = -32t + 48\\\\-32t+48 = 0\\\\32t = 48\\\\t = \frac{48}{32} \\\\t = 1.5 \ s[/tex]

Thus, the time for the projectile to hit the ground from the given position is 1.5 s.

Learn more about time of motion of projectiles here: https://brainly.com/question/13533552

Answer: The processes are conduction, convection and radiation.

Explanation: Unless people interfere, thermal energy — or heat — naturally flows in one direction only: from hot toward cold. Heat moves naturally by any of three means. The processes are known as conduction, convection and radiation. Sometimes more than one may occur at the same time.

Answer:

This statement is true, a heating curve is a graph that shows the temperature change of a substance as thermal energy is introduced.

A heating curve is a graph that represents the temperature change of a substance as thermal energy is introduced.

The heating curve can be described as the relationship between the heating supply temperature and the outside air temperature of the system. The heating curve gives what temperature the boiler is to heat the water at an outdoor temperature.

Heating curves indicate how the temperature changes as a substance are heated up. Cooling curves are generally the opposite of the heating curve. They indicate how the temperature changes as a substance are cooled down. Similar to heating curves, cooling curves have horizontal parts where the state transforms from gas to liquid/ from liquid to solid.

The heating curve represents the material in phases of solid, liquid, and gas. As this graph is a plot of T v/s q, the slope is 1/mC. As the heating continues, the solid substance melts. During this time the temperature remains constant. The length of the line can be described as the amount of heat required to melt the solid.

Learn more about the heating curve, here:
https://brainly.com/question/27018999

#SPJ2

Answer: Solids have definite shapes and liquids fill their containers.

Explanation: Liquids have got further apart molecules than solids, so the liquid molecules have a higher degree of locomotion than solid molecules, hence able to fill the container though without a definite volume, which is not the case for solid molecules.