Describe the direction in which each object will accelerate. If the object won't accelerate, write "no acceleration." Explain what might be happening to each object in terms of its overall motion.

        Control rods

____________________

Control rods are inserted into the core of a nuclear reactor and adjusted in order to control the rate of the nuclear chain reaction

o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o

The mass, the initial and the final temperature would let you  determine the heat transfer between two substances.

Heat transfer refers to the movement of thermal energy from one location or substance to another as a result of a difference in temperature. There are three primary mechanisms for heat transfer: conduction, convection, and radiation.

Conduction is the transfer of heat through direct contact of substances, such as when heat travels from a hot pan to your hand through the handle.

Convection is the transfer of heat through the movement of a fluid, such as when hot air rises and cool air sinks.

To determine the heat transfer between two substances, you need to measure their mass, initial temperature, and final temperature. With these measurements, you can calculate the change in temperature (AT) and use the equation Q = mcAT to determine the heat transfer. The specific heat capacities of both substances can be looked up.

Read more on heat transfer here:https://brainly.com/question/16055406

#SPJ1

The force winds up unchanged, at 100 N.

Answer: oceanic crust moved over the hot spot, each recently formed volcano was carried away from the hot spot toward the northwest, cutting off its source of lava. Meanwhile, a new island was forming so that over time a chain of islands was produced extending away from the hot spot.ANSWER HERE: This mean that volcanos are producing these new islands and it is creating a chain of different islands all over Hawaii.

Answer:

Oceanic crust moved over the hot spot, each recently formed volcano was carried away from the hot spot toward the northwest, cutting off its source of lava. Meanwhile, a new island was forming so that over time a chain of islands was produced extending away from the hot spot.

Answer:

Let L be the length of the wire.

N λ = M L      where N is the number of wavelengths λ. Also, M and are integers and L is the length of the wire

There must be nodes at the ends of the wire and anti-nodes at the points of zero displacement - λ/2, λ, 3λ/ 2, etc.

The simplest would be 2 λ = L   or L = λ / 2

In such a situation one would have

N-A-N    or node-antinode-node

There is a 180 degree phase change upon reflection of the wave creating the standing wave

The distance between nodes or anti-nodes must be λ/2 and there must  be nodes at the ends of the wire

[tex]\\ \sf\Rrightarrow V=\dfrac{W}{Q}[/tex]

[tex]\\ \sf\Rrightarrow V=\dfrac{9}{1}[/tex]

[tex]\\ \sf\Rrightarrow V=9V[/tex]

The distance traveled by the egg after 2 seconds is 19.6 m.

The given parameters:

The distance traveled by the egg after 2 seconds is calculated as follows;

[tex]h = v_0_y t + \frac{1}{2} gt^2\\\\[/tex]

where;

[tex]h = 0 \ + \ \frac{1}{2} \times 9.8 \times (2)^2\\\\h = 19.6 \ m[/tex]

Thus, the distance traveled by the egg after 2 seconds is 19.6 m.

Learn more about second equation of motion here: https://brainly.com/question/7977693

Answer:Answer:

See diagram for answers. The force and acceleration vectors are directed inwards towards the center of the circle and the velocity vector is directed tangent to the circle.

Explanation:

The motion of the package can be described as the motion of a projectile,

given that it has an horizontal velocity and it is acted on by gravity.

Reasons:

Velocity of the aircraft = 70 m/s

Direction of flight of the aircraft = Eastward

Height from which the aircraft drops the package, h = 800 m

a) The initial velocity of the package, [tex]\vec{v}[/tex] = 70·i

b) The time it will take the package to reach the ground, t, is given by the formula;

[tex]\displaystyle h = \mathbf{\frac{1}{2} \cdot g \cdot t^2}[/tex]

Where;

g = The acceleration due to gravity ≈ 9.81 m/s²

Therefore;

[tex]\displaystyle t = \mathbf{\sqrt{ \frac{2 \cdot h}{g} }}[/tex]

Which gives;

[tex]\displaystyle t = \sqrt{ \frac{2 \times 800}{9.81} } \approx \mathbf{12.77}[/tex]

The time it will take the package to reach the ground, t ≈ 12.77 seconds

c) The vertical velocity just before the package reaches the ground, [tex]v_y[/tex], is given as follows;

[tex]v_y^2[/tex] = 2·g·h

Therefore;

[tex]v_y[/tex] = √(2·g·h)

Which gives;

[tex]v_y[/tex] = √(2 × 9.81 × 800) ≈ 125.28

[tex]v_y[/tex] ≈ 125.28 m/s

Which gives; [tex]\vec{v}[/tex] = 70·i - 125.28·j

Therefore, |v| = √(70² + (-125.28)²) ≈ 143.51

The speed of the package as it lands, |v| ≈ 143.51 m/s

d) The motion of the package that includes both horizontal and vertical motion is a projectile motion.

Therefore;

The path of the package is the path of a projectile, which is a parabolic shape.

e) As seen by someone on the aeroplane, the horizontal velocity will be

zero, therefore, the package will appear as accelerating directly vertical

downwards.

Learn more about projectile motion here:

https://brainly.com/question/1130127

Answer:

An amorphous solid does not have a definite melting point; instead, it melts gradually over a range of temperatures, because the bonds do not break all at once. This means an amorphous solid will melt into a soft, malleable state (think candle wax or molten glass) before turning completely into a liquid.

Explanation:

Hope this helps

May I get braineist pls?

Answer:

Multiply the acceleration by time to obtain the velocity change:

Example:

Velocity change = 6.95 * 4 = 27.8 m/s . Since the initial velocity was zero, the final velocity is equal to the change of speed. You can convert units to km/h by multiplying the result by 3.6: 27.8 * 3.6 ≈ 100 km/h

Answer:

This question assumes that the car accelerates at the same rate as when it went from 0 to 60km/h

24.29m/s or 87.4km/h

Explanation:

Let's find the acceleration of the car:

let vi=0, vf=60km/h (16.67m/s), Δt = 8.0s

a = (vf-vi)/Δt

a = (16.67m/s-0)/8.0

a = 2.08m/s^2

Now we can use this acceleration to find vf in the second part:

50km/h is 13.89m/s

a = (vf-vi)Δt

vf = aΔt + vi

vf = 2.08m/s^2*5.0+13.89m/s

vf = 24.29m/s (87.4km/h)

The student who did the most work is student 2 with 2500 Joules.

Given the following data:

To determine which of the students did the most work:

Mathematically, the work done by an object is given by the formula;

[tex]Work\;done = Force \times distance[/tex]

For student 1:

[tex]Work\;done = 500 \times 1.2[/tex]

Work done = 600 Joules

For student 2:

[tex]Work\;done = 500 \times 5[/tex]

Work done = 2500 Joules.

Therefore, the student who did the most work is student 2 with 2500 Joules.

Read more: Read more: brainly.com/question/13818347

Answer:student 2 did the most work

Explanation:student 2 did more work because he pushed it up 5 m instead of 1.2.

The planet that Punch should travel to in order to weigh 118 lb is Pentune.

The mass of Punch will be constant in every planet;

[tex]W = mg\\\\m = \frac{W}{g}\\\\m = \frac{236}{g}[/tex]

The acceleration due to gravity of each planet with respect to Earth is calculated by using the following relationship;

[tex]F = mg = \frac{GmM}{R^2} \\\\g = \frac{GM}{R^2}[/tex]

where;

For Planet Tehar;

[tex]g_T =\frac{G \times 2.1M}{(0.8R)^2} \\\\g_T = 3.28(\frac{GM}{R^2} )\\\\g_T = 3.28 g[/tex]

For planet Loput:

[tex]g_L =\frac{G \times 5.6M}{(1.7R)^2} \\\\g_L = 1.94(\frac{GM}{R^2} )\\\\g_L = 1.94g[/tex]

For planet Cremury:

[tex]g_C =\frac{G \times 0.36M}{(0.3R)^2} \\\\g_C = 4(\frac{GM}{R^2} )\\\\g_C = 4 g[/tex]

For Planet Suven:

[tex]g_s =\frac{G \times 12M}{(2.8R)^2} \\\\g_s = 1.53(\frac{GM}{R^2} )\\\\g_s = 1.53 g[/tex]

For Planet Pentune;

[tex]g_P =\frac{G \times 8.3 }{(4.1R)^2} \\\\g_P = 0.5(\frac{GM}{R^2} )\\\\g_P = 0.5 g[/tex]

For Planet Rams;

[tex]g_R =\frac{G \times 9.3M}{(4R)^2} \\\\g_R = 0.58(\frac{GM}{R^2} )\\\\g_R = 0.58 g[/tex]

The weight Punch on Each Planet at a constant mass is calculated as follows;

[tex]W = mg\\\\W_T = mg_T\\\\W_T = \frac{236}{g} \times 3.28g = 774.08 \ lb\\\\W_L = \frac{236}{g} \times 1.94g =457.84 \ lb\\\\ W_C = \frac{236}{g}\times 4g = 944 \ lb \\\\ W_S = \frac{236}{g} \times 1.53g = 361.08 \ lb\\\\W_P = \frac{236}{g} \times 0.5 g = 118 \ lb\\\\W_R = \frac{236}{g} \times 0.58 g = 136.88 \ lb[/tex]

Thus, the planet that Punch should travel to in order to weigh 118 lb is Pentune.

The complete question is below:

Which planet should Punch travel to if his goal is to weigh in at 118 lb? Refer to the table of planetary masses and radii given to determine your answer.

Punch Taut is a down-on-his-luck heavyweight boxer. One day, he steps on the bathroom scale and "weighs in" at 236 lb. Unhappy with his recent bouts, Punch decides to go to a different planet where he would weigh in at 118 lb so that he can compete with the bantamweights who are not allowed to exceed 118 lb. His plan is to travel to Xobing, a newly discovered star with a planetary system. Here is a table listing the planets in that system (find the image attached).

In the table, the mass and the radius of each planet are given in terms of the corresponding properties of the earth. For instance, Tehar has a mass equal to 2.1 earth masses and a radius equal to 0.80 earth radii.

Learn more about effect of gravity on weight here: https://brainly.com/question/3908593

Answer:

concave lens focal length 2m

Answer:

You need a graphing calculator that implemented vectors. I don't know any that have it. Sorry.

Answer:

Provided an object traveled 500 meters in 3 minutes , to calculate the average velocity you should take the following steps:

Change minutes into seconds (so that the final result would be in meters per second). 3 minutes = 3 * 60 = 180 seconds ,

Divide the distance by time: velocity = 500 / 180 = 2.77 m/s .

Explanation:

Answer:

69 meters

Explanation:

Answer:

It should be fibre optic cable , buried underground

Answer:

i have not study it till now

Explanation:

sorry i don't know

Answer:

the answer is the rollar coster

Explanation:

because the rollar coster is

Answer:

A quick way of describing density is to describe an object as heavy or light for its size. Pumice stone, unlike regular rock, does not sink in water because it has a low density. An ironwood branch is very dense and sinks in water.

Hope that helps. x

Answer:

Pumice is trapped in gas when the temperature is warm, but as the temp drops, it becomes dense, due to air bubbles. Iron wood is denser than water, thus making it sink.

Explanation:

Answer:

Friction, normal force, and weight

Explanation:

If the book slows down, it means that there must be friction acting in the opposite direction of the direction the book is moving in.

Weight is caused by the gravitational pull of the Earth on the book, and normal force is the table pushing the book up because the book is pushing down on the table (3rd law.)

Note that weight and normal force is not the 3rd law action-reaction pair. The pair is the force of the book on the table and the force of the table on the book.

Answer:

  5.60 m/s

Explanation:

His initial potential energy is equal to his final kinetic energy.

  mgh = 1/2mv^2

  2gh = v^2 . . . . . . . multiply by 2/m

  v = √(2gh) = √(2(9.81 m/s²)(1.6 m)) = √(31.392 m²/s²)

  v ≈ 5.60 m/s

_____

Additional comment

The mass is irrelevant in the equations we typically use for this purpose.

Answer:

the volume changes overtime

sometimes because of weather, temperature ...

Explanation:

Answer:

4.16875×10^-9

Explanation:

given,

mass(M1)=20kg

mass(M2)= 50kg

distance(d)=4m

gravitational constant value (G)=6.67×10^-11

we know,

gravitational force=(Gm1m2)÷d^2

=(6.67×10^-11×20×50)÷4^2

=(6.67×10^-8)÷16

= 4.16875×10^-9

Answer:

-4,200,000 J

Explanation: