_____ Describes information of One and One secondary mag was from a single parent magma

The composition and viscosity of lava flows differ between composite volcanoes and shield volcanoes due to their distinct magma types. Composite volcanoes, also known as stratovolcanoes, have a high viscosity, felsic lava composition, which is rich in silica and results in explosive eruptions. In contrast, shield volcanoes produce low viscosity, mafic lava flows that are low in silica, allowing the lava to spread over larger areas and create a broad, gently sloping shield-like shape.

The composition and viscosity of lava flows can differ between composite volcanoes and shield volcanoes due to differences in the types of magma that are present in each volcano. Composite volcanoes, also known as stratovolcanoes, are characterized by more viscous magma that is high in silica content. This type of magma tends to be thicker and stickier, which can lead to explosive eruptions and the formation of steep-sided cones. In contrast, shield volcanoes are characterized by less viscous magma that is low in silica content. This type of magma is more fluid and can flow more easily, leading to the formation of wide, gentle slopes. The lava flows from shield volcanoes are generally longer and less explosive than those from composite volcanoes. Overall, the composition and viscosity of lava flows can vary greatly between different types of volcanoes, and can be influenced by a range of factors including the temperature and pressure of the magma, the amount of gas trapped within it, and the geologic setting in which the volcano is located.

Learn More about viscosity here :-

https://brainly.com/question/30577668

#SPJ11

The feature that is NOT a common site for deposition of sediment is the cutbank. Levee, distributary system, floodplain, and point bar are all common sites for sediment deposition.

A cutbank is a feature found on the outer edge of a meandering river where the water flow is fastest and the erosion of the bank is occurring. The sediment is being carried away from the cutbank and deposited downstream, making it an erosional site rather than a depositional one. Levees, distributary systems, floodplains, and point bars are all common sites for deposition of sediment. Levees are ridges of sediment that form along the banks of a river during a flood event. Distributary systems are branching networks of smaller channels that distribute sediment into different areas. Floodplains are flat areas of land next to a river that are regularly flooded and covered with sediment. Point bars are formed on the inner edge of a meandering river where the flow is slower and sediment is deposited.

In contrast, a cutbank is a site of erosion rather than deposition. It is found on the outer bend of a river where the flow is faster, leading to the erosion of the bank and the removal of sediment.

To know more about Cutbank visit:

https://brainly.com/question/30663347

#SPJ11

Volcanic activity can have a variety of indirect effects on humans, ranging from economic impacts to environmental changes. However, one of the most common indirect effects that volcanic activity can have on humans is the disruption of air travel.

When a volcanic eruption occurs, it can release large amounts of ash and other particles into the atmosphere. These particles can pose a significant threat to airplanes, as they can damage engines and other critical components. As a result, air travel in the vicinity of the eruption can be severely impacted, with flights being delayed, cancelled, or rerouted to avoid the affected area.This disruption of air travel can have significant economic consequences, as airlines may lose revenue and travelers may be stranded or forced to find alternative modes of transportation. Additionally, the disruption can have wider-reaching effects, as it can impact industries that rely on air transportation, such as tourism and global trade.While disruptions to air travel are the most common indirect effect of volcanic activity on humans, it is important to note that the impacts can vary widely depending on the specific characteristics of the eruption and the surrounding environment. As such, it is critical for scientists and policymakers to closely monitor volcanic activity and develop strategies to mitigate its potential impacts on human populations.

Learn more about humans here

https://brainly.com/question/24067944

#SPJ11

To measure an angle using a protractor, one must follow these steps: Placing the protractor on the angle, with the base of the protractor aligned with one of the angle's sides and the center point of the protractor aligned with the vertex, the angle measurement from the protractor's scale is done.

An angle is formed when two rays or lines intersect at a common endpoint, known as the vertex. To measure an angle using a protractor, the protractor is placed on the angle with one of its sides aligned with one of the sides of the angle. The vertex of the angle should be located at the center of the protractor. The measurement of the angle is then read from the scale on the protractor. The measurement of the angle can be classified as acute, obtuse, or right, depending on its degree.

Learn more about the angles here.

https://brainly.com/question/17994692

#SPJ1

Option c. "Hydropower accounts for more than half of all renewable energy use" is true.

Hydropower is a renewable energy source that harnesses the power of flowing water to generate electricity. It is one of the oldest and most widely used forms of renewable energy, and accounts for more than half of all renewable energy use globally.

Hydropower facilities use the natural flow of rivers and streams to turn turbines and generate electricity, with no direct emissions of greenhouse gases. However, the construction and use of dams can have environmental impacts, including habitat destruction, altered river flows, and changes in water temperature and quality.

In addition, variations in water released from hydropower facilities may not always match the natural flow in the affected rivers, which can have negative impacts on aquatic ecosystems and downstream communities.

The correct answer is option c.

To know more about hydropower refer to-

https://brainly.com/question/22258411

#SPJ11

It was long thought that Dilution was the solution to water pollution, something we now know is not accurate, especially for hydrophobic chemicals. Option D is correct.

Dilution was long thought to be the solution to water pollution because it was believed that by simply adding more water to a polluted body of water, the concentration of pollutants would decrease to safe levels. However, we now know that this is not always the case, especially for hydrophobic chemicals that do not dissolve easily in water. Instead, these chemicals tend to accumulate in sediment and in the fatty tissues of aquatic organisms, where they can cause harm to the ecosystem and pose a risk to human health if consumed. Therefore, it is important to use other methods, such as treatment and prevention, to reduce and eliminate water pollution.

In addition to dilution being an inadequate solution to water pollution, it can also have unintended negative consequences on the ecosystem. Adding large amounts of water to a polluted body of water can alter the natural balance of the ecosystem, leading to changes in water temperature, dissolved oxygen levels, and nutrient availability. This can have a negative impact on the survival of aquatic organisms, particularly those that are adapted to a specific set of environmental conditions.

Learn more about Dilution here:

https://brainly.com/question/28997625

#SPJ11

A phaneritic texture is a characteristic of a intrusive igneous rock that cooled slowly beneath the Earth's surface. The term "phaneritic" refers to the visible mineral grains that make up the rock, which are typically coarse-grained and can be seen with the  eye.

This texture is a result of the slow cooling process, which allows for the minerals to grow and crystallize over a longer period of time.

In contrast, extrusive igneous rocks cool quickly on or near the Earth's surface and have a fine-grained texture. This is because the minerals do not have as much time to grow and crystallize before the rock solidifies. Overall, the texture of an igneous rock can provide important information about its formation and history, and the presence of a phaneritic texture suggests that the rock formed deep within the Earth's crust.

Learn more about phaneritic here:

https://brainly.com/question/12348142

#SPJ11

The term associated with Etruscan art and architecture that describes a coffin made of stone that is typically adorned with sculpture is A) Sarcophagus.

A sarcophagus is a type of coffin that is made of stone and decorated with sculpture. The word "sarcophagus" comes from the Greek words "sarx" meaning "flesh" and "phagein" meaning "to eat", reflecting the idea that the coffin consumed the body placed inside.

In Etruscan art and architecture, sarcophagi were often elaborate and highly decorated, with intricate relief sculptures depicting scenes from mythology or the life of the deceased. They were typically made of terracotta or stone, and sometimes featured a portrait of the deceased on the lid.

Etruscan sarcophagi were also sometimes used for multiple burials, with compartments inside the coffin for multiple bodies. The practice of using sarcophagi continued into the Roman era, and many examples of Roman sarcophagi can be found throughout Italy and other parts of the Roman Empire.

Learn more about Sarcophagus here:

https://brainly.com/question/31605503

#SPJ11

In the video, it is explained that Rhyolite is a volcanic rock that is formed from the cooling and solidification of magma or lava. The minerals that make up Rhyolite are quartz, feldspar, and biotite.

Quartz is a mineral that is commonly found in igneous rocks and is composed of silicon and oxygen. Feldspar is another mineral commonly found in igneous rocks and is made up of aluminum, silica, and potassium or sodium. Biotite is a dark-colored mineral that is a member of the mica group and is made up of iron, magnesium, aluminum, silica, and oxygen. Rhyolite is a fine-grained rock that has a high silica content, which gives it a light color and a glassy texture. It is commonly found in volcanic regions and is often associated with explosive volcanic activity. Rhyolite is used in construction and as a decorative stone because of its attractive colors and textures. It is also used in the production of ceramics, glass, and other industrial materials. Overall, the minerals that make up Rhyolite play an important role in its physical properties and its uses.

Learn more about Rhyolite here

https://brainly.com/question/14333029

#SPJ11

The 1963 Moscow Test Ban Treaty, also known as the Partial Nuclear Test Ban Treaty (PTBT), had several limitations. First, it prohibited nuclear weapon tests only in the atmosphere, outer space, and underwater, allowing for underground tests to continue.

This meant that countries could still develop and improve their nuclear weapons capabilities without violating the treaty. Second, the treaty lacked a robust verification mechanism. It relied on the voluntary cooperation of the signatories to monitor and report any violations. This made it difficult to ensure that all parties were abiding by the agreement, leaving room for potential clandestine testing. Third, some major nuclear powers, such as France and China, did not sign the treaty. This limited its effectiveness in curbing the global nuclear arms race, as non-signatories could continue their testing programs without restrictions. Lastly, the treaty did not address the issue of disarmament or the reduction of existing nuclear weapons stockpiles. Its focus was solely on limiting the testing of new weapons. Consequently, it did not contribute to a significant reduction in the number of nuclear weapons worldwide. In summary, the Moscow Test Ban Treaty faced limitations in its scope, verification mechanisms, participation of major nuclear powers, and its inability to address disarmament. Despite these shortcomings, the treaty was a crucial first step towards international efforts to regulate and control the development of nuclear weapons.

Learn more about Partial Nuclear Test Ban Treaty here

https://brainly.com/question/3477157

#SPJ11

Differential weathering is when various geologic materials exposed to the same environmental conditions will weather differently depending on their composition. Therefore the correct option is option C.

Differential weathering is a process in which various geologic materials exposed to the same environmental conditions will weather differently depending on their composition.

This can result in the formation of unusual and distinctive landforms, such as the hoodoos in Bryce Canyon National Park, where harder and more resistant rock layers stand above softer, more easily weathered layers.

The differential weathering occurs because different rocks have different physical and chemical properties that affect how they respond to environmental forces such as wind, water, and temperature changes.Therefore the correct option is option C.

For such more question on environmental:

https://brainly.com/question/23946590

#SPJ11

Partial melting of rock in subduction zones is aided by the addition of water, which is (are) released by sediments on top of the subducting plate

However, this partial melting is aided by the addition of water, which is released by sediments on top of the subducting plate. Water is a volatile substance that lowers the melting temperature of rocks, allowing them to partially melt even at lower temperatures. The water is released from the sediments on top of the subducting plate as it gets squeezed and heated during the subduction process. The water then migrates into the overlying mantle wedge, where it interacts with the mantle rocks and triggers partial melting. This partial melting generates magma, which rises to the surface and forms volcanoes. Therefore, the addition of water is crucial for the formation of volcanic arcs in subduction zones. The other options, air and sand, do not have the same effect as water in aiding the partial melting of rock in subduction zones.

Know more about Subduction zones here:

https://brainly.com/question/13788626

#SPJ11

After being transported to the New World on the Middle Passage, slaves were most frequently sent to work on plantations in the Caribbean, Brazil, and the southern colonies of North America.

The Caribbean was a major destination for slaves due to the large number of sugar plantations in the region. Brazil also had a thriving sugar industry as well as large coffee and tobacco plantations.

In North America, slaves were sent primarily to work on cotton, tobacco, and rice plantations in the southern colonies, including Virginia, South Carolina, and Georgia. Slaves were also sent to other parts of the Americas, such as Mexico and Peru, to work in mines or on haciendas.

Overall, the locations where slaves were sent were determined by the demands of the global economy and the specific crops and resources that were being produced in each region.

To know more about slaves refer to-

https://brainly.com/question/16747534

#SPJ11

Slaves were most frequently sent to locations such as the Caribbean islands, Brazil, and the southern colonies of present-day United States.

After being transported to the New World on the Middle Passage, slaves were most frequently sent to locations such as the Caribbean islands, Brazil, and the southern colonies of present-day United States, including places like Virginia, South Carolina, and Georgia.

https://brainly.com/question/31855989

#SPJ12

Shiprock, New Mexico is an example of a volcanic neck, also known as a volcanic plug. A volcanic neck is a column of solidified magma that forms when magma is forced into a vertical conduit and then solidifies underground.

The surface of the solidified magma neck is revealed as the surrounding rock erodes away over time.

When compared to its surroundings, Shiprock, a volcanic neck that rises approximately 1,800 feet above the ground, is particularly stunning. It is made of volcanic breccia, a type of rock created by violent eruptions that break lava into tiny pieces.

It is thought that the lava that gave rise to Shiprock was created in the area some 30 million years ago, during the height of a period of active volcanic activity.

For such more question on volcanic:

https://brainly.com/question/1156480

#SPJ11

The point A is the PPC that represents the economy after the war

PPC, or Production Possibility Curve (also dubbed as the Production Possibility Frontier), is a graphical representation that discloses the limit of blend of two commodities which can be produced with restricted assets and technology in a particular society.

The PPC conveys the compulsory concessions that must be made when deciding to manufacture one item rather than another, thus emphasizing the concept of opportunity cost.

This curve is habitually diagrammed as a faintly-descending line where one good can be located on the X-axis, then correspondingly accompanied by the other good situated on the Y-axis.

Read more on PPC here:https://brainly.com/question/20995982

#SPJ1

Answer:

3rd green dot down

The fetch of a moving storm system on the side of the storm where the wind is blowing in the direction as the storm is moving opposite increases. The correct answer is option d.

The fetch refers to the distance over which wind can blow over water and generate waves. In a moving storm system, the fetch on the side of the storm where the wind is blowing in the opposite direction to the storm's movement will decrease because the storm is moving away from the area where the wind can generate waves.

Conversely, the fetch on the side of the storm where the wind is blowing in the same direction as the storm's movement will increase because the storm is pushing more water ahead of it and increasing the area over which wind can generate waves. Therefore, the correct answer is "Increases; opposite."

The correct answer is option d.

To know more about moving storm system refer to-

https://brainly.com/question/30436970

#SPJ11

Complete question

the fetch of a moving storm system on the side of the storm where the wind is blowing in the direction as the storm is moving. multiple choice

a. both decreases;

b. opposite and increases;

c. same are correct increases;

d. opposite increases;

e. same decreases;

f. same decreases;

g. opposite

Hot spots in continental settings typically produce basaltic lava flows or explosive calderas. Unlike hot spots in oceanic settings, which tend to produce linear chains of volcanic islands or seamounts.

these hot spots in continental settings tend to form large volcanic features, such as basaltic lava flows or explosive calderas. These features can be associated with high levels of volcanic activity and may occur in areas of continental rifting or other tectonic activity. The type of volcanic activity produced by a hot spot in a continental setting can vary depending on a number of factors, including the composition of the magma, the presence of water or other volatile substances, and the type of tectonic activity in the region. In some cases, hot spots in continental settings may produce large shield volcanoes, which are broad, gently sloping structures built up over time by successive eruptions of fluid lava. In other cases, the hot spot may produce more explosive eruptions, such as calderas or pyroclastic flows. Overall, the volcanic activity associated with hot spots in continental settings can be highly variable, but tends to be more explosive and produce larger-scale volcanic features than hot spots in oceanic settings.

Learn more about volcanic islands here:

https://brainly.com/question/30711133

#SPJ11

Answer:

Carbon Dioxide

Explanation:

Trust me its correct but for those who are hesitant

---> In 1986, possibly as the result of a landslide, Lake Nyos suddenly emitted a large cloud of CO2(Which is Carbon Dioxide), which suffocated 1,746 people and 3,500 livestock in nearby towns and villages, the most notable one being Chah, which was abandoned after the incident.

Answer: B. Women who enjoy a higher social status are usually more educated than women of a lower social status.

Explanation:

Other than sand dunes in a desert environment, you would expect to find well-rounded and sorted sand deposits in environments where there is water movement and erosion.

A) Delta: Deltas are formed at the mouth of rivers where they meet an ocean, lake, or other body of water. The river deposits sediment, including sand, as it slows down in the body of water. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the delta environment.

B) Beach: Beaches are formed from the accumulation of sediment, including sand, that is transported by waves and currents along the shoreline. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the beach environment.

C) Lake: Lakes can have sand deposits that are well-rounded and sorted, especially in areas where there is wave action and currents. The sand may be transported to the lake from nearby rivers or streams or may be formed from the erosion of the lake shore.

D) Glacier: Sand deposits associated with glaciers may not be well-rounded, as the glaciers can transport a variety of sediment sizes and shapes. However, some sand deposits associated with glaciers may be sorted due to the water movement and erosion that occurs as the glacier melts.

E) Reef: Sand deposits may be found in coral reef environments, where waves and currents transport sediment onto the reef. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the reef environment.

Learn more about erosion: https://brainly.com/question/3852201

#SPJ11

Answer:

arête

Explanation:

An arête is a jagged ridge that remains when cirques form on opposite sides of a mountain.

The geologic structure in which deformed rock layers on both sides of an axis dip towards each other is known as a syncline.

Geologic structures are features in the Earth's crust that result from various geologic forces, such as tectonic plate movement and volcanic activity.

A monocline is a type of fold in which rock layers are folded or tilted so that they slope downward in one direction. This creates a step-like structure in the rock layers.

A syncline is a type of fold in which rock layers are folded or tilted so that they slope downward in the middle, creating a trough-like structure.

An anticline is a type of fold in which rock layers are folded or tilted so that they slope upward in the middle, creating an arch-like structure.
A thrust fault is a type of fault in which rock layers are pushed up and over other rock layers along a fault line, often resulting in a steeply inclined fault plane.

learn more about monocline here:https://brainly.com/question/14093076

#SPJ11

The correct answer is d. The rock cooled slowly. A welded igneous texture indicates that the rock cooled slowly. This texture is formed when hot magma, rich in gas, cools and solidifies gradually over time.

As the magma cools, it solidifies into a cohesive mass, and the gases escape, leaving behind a dense, welded texture. This process can take weeks, months, or even years, depending on the size and composition of the magma body. The slow cooling allows for the mineral crystals to grow and interlock with each other, creating a strong, durable rock. The resulting rock is typically fine-grained, with no visible crystals or pores. So, option d. the rock cooled slowly, is the correct answer to your question.

To know more about hot magma.

https://brainly.com/question/24384827

#SPJ11

The last seismic waves to arrive at a seismic station are Surface waves. Seismic waves are the vibrations generated by earthquakes and recorded by seismic stations.

There are two main categories of seismic waves: body waves and surface waves. Body waves consist of P-waves (compressional waves) and S-waves, both of which travel through the Earth's interior. Surface waves, on the other hand, travel along the Earth's surface and generally cause more damage due to their larger amplitudes and longer durations.
P-waves, being compressional waves, are the fastest of the three types and arrive first at a seismic station. They compress and expand the ground in the direction of their propagation. S-waves arrive next, being slower than P-waves, and cause the ground to move perpendicular to their direction of travel.
Surface waves arrive last because they travel at a slower speed than body waves. They can be further divided into two types: Rayleigh waves and Love waves. Rayleigh waves cause the ground to move in an elliptical motion, while Love waves create horizontal ground movement. The combination of these two surface wave types can lead to significant damage during earthquakes.

Learn more about seismic waves here:

https://brainly.com/question/13056218

#SPJ11

Answer:He believed that economic progress is the mark of a successful empire.

Explanation:

The setup of six corridors through which a significant proportion of European freight passes, despite covering only a small percentage of the region's roads, is a strategic decision aimed at optimizing the transportation of goods across Europe.

These corridors were chosen based on their geographic location, connectivity to major ports and cities, and potential for improving the efficiency of freight transport.

By concentrating the majority of freight traffic on these corridors, it is possible to streamline the movement of goods, reduce congestion and travel time, and lower transport costs.

This approach also facilitates the implementation of sustainable transport solutions, such as intermodal transport, which involves the use of multiple modes of transportation to transport goods.

Overall, the establishment of these corridors highlights the importance of efficient and sustainable freight transport in supporting Europe's economic growth and competitiveness, while minimizing the environmental impact of transportation.

To know more about freight refer here:

https://brainly.com/question/30789296#

#SPJ11

The brightness of a star decreases with distance from Earth, following an inverse square law. Therefore, if star A is twice as far away as star B, the apparent brightness of star A will be 1/4th (2^(-2)) of the apparent brightness of star B.

However, the intrinsic brightness of both stars is the same. Therefore, the ratio of their intrinsic brightness will be the same as the ratio of their apparent brightness. So, the apparent brightness ratio of 1/4 translates to an intrinsic brightness ratio of 1/1. Therefore, star A and star B have the same intrinsic brightness, even though star B appears 4 times brighter than star A to our eyes due to its closer distance.

Answer:IT ISSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

Explanation:

while i was reading  i saw that it said that it is hold up

Your answer: A) Permineralization. Petrified wood is an example of permineralization, a type of fossil preservation. In this process, minerals from the surrounding environment fill in the pores and spaces within the wood, gradually replacing the organic material and preserving its original structure. This creates a fossilized, stone-like replica of the original wood.

The answer is A) Permineralization. Petrified wood is formed through the process of permineralization where the organic material of the wood is replaced by minerals over time. This results in a fossilized replica of the original wood. Mold and cast preservation involve the creation of a negative and positive impression respectively, while impression preservation involves the direct impression of the organism onto a surface. Burrow preservation is when a trace fossil of an animal's burrow is left behind.

Learn more about Burrow preservation here: brainly.com/question/23172786

#SPJ11

A worm burrow is an example of trace fossilization.  Trace fossils are the remains of biological activity, such as burrows, footprints, and coprolites (fossilized feces), rather than the preserved remains of an organism's body.

Trace fossils provide important information about the behavior and ecology of ancient organisms, as well as the conditions of their environment.  In the case of a worm burrow, the fossilized remains of the burrow show that a worm or other burrowing organism was present in the sediment at some point in the past. This can provide clues about the sedimentary environment and the type of organisms that were living there, as well as how they interacted with their environment. Trace fossils, such as worm burrows, provide important information about the behavior and ecology of ancient organisms. Trace fossils can include impressions, tracks, trails, burrows, borings, and other evidence of the activities of living organisms.

Trace fossils are different from body fossils, which preserve the actual remains of an organism's body, such as bones, shells, and teeth. Trace fossils provide evidence of the behavior of ancient organisms, such as how they moved, what they ate, and how they interacted with their environment.

Learn more about ecology here:

https://brainly.com/question/30429252

#SPJ11