Determine the amount of taxes owed on a taxable income of $51, 100.
A) $5,310.00
B) $6,919.00
C) $11,682.00
D) $12,744.40

The answer of the given question based on the graph is ,  The locations of A′ and B′ are A′ (0, 1) and B′ (1, 0); lines f and f′ are parallel.

A scale factor is a number that scales, or multiplies, a quantity by some factor. It is used in mathematics to describe the relationship between corresponding measurements of two similar figures, such as triangles or rectangles.

To dilate line f by scale factor of one half with center of dilation at origin, we  multiply coordinates of each point on line f by 1/2.

The equation of line f can be found by using the points A and B:

slope of line f = (0 - 2)/(2 - 0) = -1

y-intercept of line f = 2

Therefore, the equation of line f is y = -x + 2.

To find the coordinates of A' and B' after dilation, we can apply the dilation factor to each point:

A' = (0, 2)*1/2 =(0, 1)

B' = (2, 0)*1/2 =(1, 0)

So A' is located at (0, 1) and B' is located at (1, 0) after dilation.

Now let's analyze the relationship between lines f and f'. The dilation was centered at the origin, so the origin is a fixed point of the dilation. This means that the point where lines f and f' intersect must be the origin.

If we plug in x = 0 into the equation of line f, we get y = 2. This means that point A is located at (0, 2) and intersects with line f at y = 2. After dilation, point A' is located at (0, 1), which means that lines f and f' intersect at point A.

To determine the relationship between lines f and f', we can compare their equations. The equation of f' can be found by using the points A' and B':

slope of f' = (0 - 1)/(1 - 0) = -1

y-intercept of f' = 0

Therefore, the equation of f' is y = -x.

Comparing the equations of f and f', we can see that they have the same slope of -1, which means they are parallel. Therefore, the correct answer is: The locations of A′ and B′ are A′ (0, 1) and B′ (1, 0); lines f and f′ are parallel.

To know more about Center of dilation visit:

https://brainly.com/question/30240999

#SPJ1

The per square meter cost of steel will be $32. The solution has been obtained by using the cylinder.

What is a cylinder?

The cylinder, one of the most basic curvilinear geometric shapes, has long been considered to be a three-dimensional solid. It is regarded as a prism with a circle as its basis in elementary geometry.

We are given that the height of cylinder is 8 m and diameter is 10 m.

So, the radius is 5 m.

Now, using the surface area formula, we get

⇒ S = 2πrh + 2π[tex]r^{2}[/tex]

⇒ S = 2π * 5 * 8 + 2π * [tex]5^{2}[/tex]

⇒ S = 2 * 3.14 * 5 * 8 + 2 * 3.14 * 25

⇒ S = 251.2 + 157

⇒ S = 408.2 square meter

Now, it is given that the total cost of the steel will be $13,062.40.

So, per square meter cost will be:

⇒ Cost = [tex]\frac{13,062.40}{408.2\\}[/tex]

⇒ Cost = $32

Hence, the per square meter cost of steel for the cylinder will be $32.

Learn more about cylinder from the given link

https://brainly.com/question/27440983

#SPJ1

Answer:

4

Step-by-step explanation:

The equation for the volume of a sphere is [tex]\frac{4}{3}[/tex][tex]\pi r^3[/tex].

[tex]\frac{4}{3} \pi r^3 = 33.5[/tex]

[tex]r^3 = \frac{33.5*3}{4\pi} \\r = \sqrt[3]{\frac{33.5*3}{4\pi} }\\r = 2\\2 * r = 2 * 2 = 4[/tex]

Answer:

B.

Step-by-step explanation:

Answer:

B.

Step-by-step explanation:

the description is very confusing and lacks any hint about the behavior of the curve before the change.

but ok, let's assume that the curve (line ?) is in general going up. in other words, if the traveled miles go up, so does the profit.

I also don't know how they could drive the miles without paying the driver, but again, let's assume they did.

now they pay the driver. $0.25 per mile.

this has to come out of their profit.

so, the Y (profit) values all go down by 0.25.

therefore, the y-intercept is going down too.

that eliminates C. and D.

for this to be true they have to have some overhead costs that apply even if there are 0 miles traveled (which is the meaning of the y-intercept : the y-value when x = 0).

so, the line must be in a form

y = ax + b

with "b" <> 0.

and since we assumed the line to go up (positive slope), a "sinking" line means that the x-intercept (the break-even point, where the line goes from below the x-axis and therefore negative (y) profit up into positive profit) will move to the right (become greater).

because now that they have additional costs (paying the driver), it takes longer (more driven miles) to make a positive profit.

and that eliminates A, leaving B. as the right answer.

The line graph of Greg's data wood look like "It would move upward."

A graph is a visual representation of data that shows the relationship between two or more variables. There are several types of graphs that can be used to display data

If Greg is measuring the height of the plant each day and the plant is continuing to grow for two weeks, then the line graph of his data would move upward. The graph would show an increasing trend as the plant grows taller each day. Therefore, the correct answer is "It would move upward."

To know  more about graph visit:

https://brainly.com/question/29629845

#SPJ1

We are adjusting the original rectangular solid and here is what we have:

(a) The lateral area is the sum of the areas of the four sides, which are all rectangles. The two sides with dimensions 8 x 3 have an area of 8 x 3 = 24 square units each, and the two sides with dimensions 10 x 3 have an area of 10 x 3 = 30 square units each. Therefore, the lateral area is:

2(24) + 2(30) = 48 + 60 = 108 square units

(b) The total area is the sum of the areas of all six faces. The two faces with dimensions 10 x 8 have an area of 10 x 8 = 80 square units each, the two faces with dimensions 8 x 3 have an area of 8 x 3 = 24 square units each, and the two faces with dimensions 10 x 3 have an area of 10 x 3 = 30 square units each. Therefore, the total area is:

2(80) + 2(24) + 2(30) = 160 + 48 + 60 = 268 square units

(c) The volume is the product of the length, width, and height of the rectangular solid. Therefore, the volume is:

10 x 8 x 3 = 240 cubic units

Learn more about rectangular solid here:

https://brainly.com/question/28123312

#SPJ1

The balance in the account after 6 years is $2,466.69.

What is compound interest?

Compound interest is when you earn interest on both the money you've saved and the interest you earn.

We can use the formula for compound interest to find the balance in the savings account after 6 years:

[tex]A = P(1 + r/n)^{(nt)}[/tex]

where:

A is the balance in the account after t years

P is the initial deposit, which is $2,225

r is the annual interest rate, which is 1.625%

n is the number of times the interest is compounded per year, which is 4 (since it's compounded quarterly)

t is the number of years, which is 6

Plugging in these values, we get:

[tex]A = 2,225(1 + 0.01625/4)^{(4*6)}\\A = 2,225(1.0040625)^{24}[/tex]

A = 2,225(1.108227)

A = 2,466.69

Hence, the balance in the account after 6 years is $2,466.69.

To learn more about compound interest visit:

https://brainly.com/question/3989769

#SPJ1

The statement "About 16% of the students scored 74 or below" is true for the given normal distribution of test scores with an average of 78 and a standard deviation of 4.

Standard deviation is a measure of the amount of variation or dispersion of a set of values from their mean (average) value. It is calculated as the square root of the variance of a set of data. A smaller standard deviation indicates that the values are tightly clustered around the mean, while a larger standard deviation indicates that the values are more spread out.

In the given question,

About 16% of the students scored 74 or below is true. This is because of the empirical rule for normal distributions, which states that approximately 68% of the data falls within one standard deviation of the mean, 95% within two standard deviations, and 99.7% within three standard deviations. So, if the average score is 78 and the standard deviation is 4, a score of 74 falls one standard deviation below the mean, which represents about 16% of the total data.

To know more about standard deviation, visit:

https://brainly.com/question/23992131

#SPJ1

Answer:

About 97.5%  of the students scored 86 or below.

Step-by-step explanation:

Answer:

Step-by-step explanation:

Answer:

You can make 12 possible sundaes with these toppings.

Step-by-step explanation:

Chocolate, Vanilla, and Strawberry all have 4 possible outcomes:

1. Fudge & Chocolate Sprinkles

2. Fudge & Rainbow Sprinkles

3. Marshmallow & Chocolate Sprinkles

4. Marshmallow & Rainbow Sprinkles

-------------------------------------------------------------------------------------------------------------

4 x 3 will equal 12, the total possible sundaes you can make with these toppings and ice cream flavors.

Answer:

-2.5

Step-by-step explanation:

follow BIMDAS.

like my answer if you find it helpful

Answer:

40%

Step-by-step explanation:

2/5=x/100

cross multiply and you get 5x=200

by isolation the variable you will get x=40

therefore, 40% of Canadians read at least 10 books a year

The relation that is a function is D: {(–3, 2), (–2, 3), (–1, 2), (0, 4), (1, 1)}.

A function is a relation between a set of inputs and a set of possible outputs with the property that each input is related to exactly one output. In other words, for a relation to be a function, each input can only be related to one output.

In relation D, each input (x-value) has a unique output (y-value), meaning that each x-value is only paired with one y-value. In contrast, relations A, B, and C have repeated x-values with different y-values, which means that they are not functions.

In relation A, the input -1 is paired with two different outputs (2 and 3). In relation B, both inputs 0 and -1 are each paired with two different outputs. In relation C, both inputs 0 and -3 are each paired with two different outputs. Therefore, only relation D satisfies the definition of a function.

More on relation can be found here: https://brainly.com/question/18790700

#SPJ1

Answer:

f(x) - g(x) = 2x² + 6x - 4

Step-by-step explanation:

f(x) - g(x)

= 3x² + x - 3 - (x² - 5x + 1) ← distribute parenthesis by - 1

= 3x² + x - 3 - x² + 5x - 1 ← collect like terms

= 2x² + 6x - 4

Answer: Let's say that the width of the rectangle is x meters. Then, according to the problem, the length of the rectangle is 6 meters longer than the width, which means that the length is (x + 6) meters.

The formula for the area of a rectangle is:

Area = Length x Width

We are given that the total area of the rectangle is 16m². Substituting the expressions for length and width, we get:

(x + 6) x = 16

Expanding the product and rearranging, we get a quadratic equation:

x² + 6x - 16 = 0

We can solve this equation by factoring or by using the quadratic formula. Factoring, we get:

(x + 8) (x - 2) = 0

This equation is satisfied when either x + 8 = 0 or x - 2 = 0. Therefore, the possible values for the width are x = -8 or x = 2. However, since the width of a rectangle cannot be negative, we reject the solution x = -8.

Therefore, the width of the rectangle is x = 2 meters. The length is 6 meters longer than the width, so the length is (2 + 6) = 8 meters.

Therefore, the dimensions of the rectangle are 2 meters by 8 meters.

Step-by-step explanation:

Using the formula for the area of a rectangle, the area of the cellphone is 18x⁻¹y⁸ OR 18y⁸/x

From the question, we are to calculate the area of the cellphone shown in the diagram

From the given information,

We have a diagram that shows a cellphone which is rectangular in shape.

Thus,

We will use the formula for finding the area of a rectangle to calculate the area of the cellphone.

Area of a rectangle = Length * Width

From the given information,

Length of the cellphone = 6x²y⁶

Width of the cellphone = 3x⁻³y²

Thus,

Area of the cellphone = 6x²y⁶ × 3x⁻³y²

Area of the cellphone = 6 × 3 × x² × x⁻³ × y⁶ × y²

Area of the cellphone = 18 × x⁻¹ × y⁸

Area of the cellphone = 18x⁻¹y⁸ OR 18y⁸/x

Hence,

The area of the cellphone is 18x⁻¹y⁸ OR 18y⁸/x

Learn more on Calculating area here: https://brainly.com/question/25292087

#SPJ1

Step-by-step explanation:

data given

men 330 ,days30

men? ,days11

from

men(m) are inversely proportional todays (d)

m=k/d

330×30=k

k=9900

now,

m=9900/11m

m=900

data given

friends 20, time 2hours

friends 30, time?

from

friends (f) are inversely proportional to time (t)

f=k/t

k=20×2

k=40

now,

t=40/30

t=1.3(1:18)

The surface area of cylinder M is approximately 131.95 square feet and the surface area of cylinder N is approximately 319.77 square feet.

What is a cylinder?

A cylinder is a three-dimensional geometric shape that consists of two congruent parallel bases in the shape of circles or ellipses, and a curved surface that connects the bases. The height of a cylinder is the perpendicular distance between the bases. A cylinder is a type of prism, and it can be classified as either a right cylinder or an oblique cylinder depending on whether or not its axis is perpendicular to its bases. Right cylinders have circular bases and their axis is perpendicular to the bases, while oblique cylinders have elliptical bases and their axis is not perpendicular to the bases.

Now,

Let the radius of cylinder M be r and its height be h. Then, the radius and height of cylinder N are both 2r, since the radius is equal to the height.

Since the cylinders are similar, their dimensions are proportional, which means:

(height of N) / (height of M) = 5/3

(radius of N) / (radius of M) = (2r) / r = 2

Using the formula for the surface area of a cylinder, we can write:

Surface area of cylinder M: 2πr² + 2πrh

Surface area of cylinder N: 2π(2r)² + 2π(2r)(5/3)h

We are told that the surface area of cylinder N is 256 square feet greater than the surface area of cylinder M. So we can set up the equation:

2π(2r)² + 2π(2r)(5/3)h = 2πr² + 2πrh + 256

Simplifying and solving for h, we get:

4r² + 20rh/3 = r² + rh + 128

3r² - rh - 128 = 0

(3r + 32)(r - 4) = 0

Since the height of the cylinder cannot be negative, we take the positive solution r = 4. Then, the height of cylinder M is (3/5)(4) = 12/5, and the height of cylinder N is 2(4) = 8.

Using the formulas for surface area, we can find the surface areas of both cylinders:

Surface area of cylinder M: 2π(4)² + 2π(4)(12/5) = 131.95 square feet

Surface area of cylinder N: 2π(2(4))² + 2π(2(4))(8) = 319.77 square feet

Therefore, the surface area of cylinder M is approximately 131.95 square feet and the surface area of cylinder N is approximately 319.77 square feet.

To know more about cylinder visit the link

brainly.com/question/16134180

#SPJ1

The percent of the box that will remain unwrapped by the 60 square feet of paper is about 20.70%

A percentage is a proportion of a number expressed as fraction of a 100

The dimensions in mixed fractions can be expressed as follows;

Height of the box = 1 2/3 feet = 5/3 feet

Width of the box = 4 feet

Length of the box = 5 1/2 feet = 11/2 feet

Surface area of the box, A = 2 × (5/3) × 4 + 2 × 4 × 11/2 + 2 × (5/3) × 11/2 = 227/3 = 75 2/3 square inches

The percent of the box that will remain unwrapped is therefore;

Percentage = 60/(227/3) × 100 ≈ 79.3%

The percentage of the box that will remain unwrapped is about (100 - 79.3)% = 20.70%

Learn more on the percentages here: https://brainly.com/question/11642822

#SPJ1

The statements are classified as Exponential decay and Linear growth.

a. Exponential decay: The amount of caffeine in the bloodstream decreases by 50% every 5 hours, which indicates an exponential decay process where the quantity decreases at a constant percentage rate over time.

b. Linear growth: The amount of trash in a landfill increases by 350 tons per week, which indicates a linear growth process where the quantity increases by a constant amount over time.

c. Exponential decay: The amount of alcohol in the bloodstream decreases by 10 grams (the amount in a standard drink) per hour after stopping drinking, which indicates an exponential decay process where the quantity decreases at a constant percentage rate over time.

d. Linear growth: Your age increases every day, which indicates a linear growth process where the quantity (age) increases by a constant amount (1 day) over time.

Learn  more about Exponential decay here: https://brainly.com/question/25802424

#SPJ1

Michelle can make 6 floor boards for her car.

To determine how many floor boards Michelle can make, we need to divide the total length of wood she has (13.2 meters) by the length of each floor board (2.2 meters).

The number of floor which boards Michelle can make is:

= 13.2 meters / 2.2 meters/floor board

= 6 floor boards

Therefore, Michelle can make 6 floor boards for her car using the 13.2 meters of wood she has.

Read more about floor board

brainly.com/question/25676992

#SPJ1

By answering the presented question, we may conclude that Finally, the expressions fourth column represents the value of the expression A ⋀ ~B for each possible combination of truth values of A and B.

To create a truth table for A ⋀ ~B, we first need to list all possible combinations of truth values for A and B, and then calculate the value of the expression A ⋀ ~B for each combination.

A B ~B A ⋀ ~B

True True False False

True False True True

False True False False

False False True False

In the above truth table, the first column lists all possible truth values of A, and the second column lists all possible truth values of B. The third column represents the negation of B, which is denoted as ~B. Finally, the fourth column represents the value of the expression A ⋀ ~B for each possible combination of truth values of A and B.

Therefore, the truth table for A ⋀ ~B is:

A B A ⋀ ~B

True True False

True False True

False True False

False False False

To know more about truth table visit :-

https://brainly.com/question/31482105

#SPJ1

The two possible locations for the fourth vertex are (4, -4) and (-3, -1).

What is quadratic equation?

it's a second-degree quadratic equation which is an algebraic equation in x. Ax2 + bx + c = 0, where a and b are the coefficients, x is the variable, and c is the constant term, is the quadratic equation in its standard form.

To find the location of the fourth vertex of the square, we need to use the fact that a square has four equal sides and four right angles.

The first two vertices given are (4, 3) and (-3, 3), which lie on a horizontal line segment of length 7.

The third vertex is (-3, -4), which is 7 units away from the first two vertices and lies on a vertical line segment.

Since the square has four equal sides, the distance between the third vertex and the fourth vertex must also be 7 units.

And since the square has four right angles, the fourth vertex must be located on a vertical line passing through the first two vertices or on a horizontal line passing through the third vertex.

So, there are two possible locations for the fourth vertex:

(4, -4): This point is located 7 units below the first vertex (4, 3) on the vertical line passing through it.

(-3, -1): This point is located 7 units to the right of the third vertex (-3, -4) on the horizontal line passing through it.

Therefore, the two possible locations for the fourth vertex are (4, -4) and (-3, -1).

To learn more about quadratic equations from the given link:

brainly.com/question/30098550

#SPJ1

The probabilities are as follows:

(a) P(A')= 0.7

(b) P(A∪B) =  0.3

(c) P(A'∩B) =  0

(d) P(A∩B') =  0.1

(e) P[(A∪B)'] =  0.7

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen.

(a) P(A') = 1 - P(A) = 1 - 0.3 = 0.7

(b) P(A∪B) = P(A) + P(B) - P(A∩B) = 0.3 + 0.2 - 0.2 = 0.3

(c) P(A'∩B) = P(B) - P(A∩B) = 0.2 - 0.2 = 0

(d) P(A∩B') = P(A) - P(A∩B) = 0.3 - 0.2 = 0.1

(e) P[(A∪B)'] = 1 - P(A∪B) = 1 - 0.3 = 0.7

Note: P(A) represents the probability of event A occurring, P(B) represents the probability of event B occurring, and P(A∩B) represents the probability of both events A and B occurring simultaneously. The symbol '∪' represents the union of two events, and the symbol '∩' represents the intersection of two events. The complement of an event A is represented by A'.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ1

Answer:

------------------------------

Use the formula for permutations:

The number of objects is n = 7 books.

Calculate the factorial:

Answer:

Phn10x12

Step-by-step explanation:

PEANUTS CASHEWS MIXTURE Number of Grams (g) 12 X 12+ X Price per grams Php 10.00 Php 8.00 Php 9.00 Total Price Phn10x12 = Php 120 8x 9 [12+x]​

We can write g in terms of f as: g(x) = f(x) - 3 = x² - 3

What is function?

In mathematics, a function is a relationship between two sets of elements, called the domain and the range, such that each element in the domain is associated with a unique element in the range. In simpler terms, a function is a set of rules that takes an input value and produces a corresponding output value.

To write g in terms of f, we can use function composition, which involves plugging the function f(x) into g(x) wherever we see x.

So, we have:

g(x) = f(x) - 3

where f(x) = x².

Substituting f(x) into g(x), we get:

g(x) = (x²) - 3

Therefore, we can write g in terms of f as:

g(x) = f(x) - 3 = x² - 3.

To learn more about functions from the given link:

https://brainly.com/question/12431044

#SPJ1

Answer:

2.5cm

Step-by-step explanation:

you half the diameter to get the radius

We need to select at least 754 people for the experiment to estimate the fraction of people who black out at G forces greater than 6 with an error of at most 0.03 and a 95% confidence level.

We can use the formula for the sample size required to estimate a population proportion with a specified margin of error and confidence level:

n = (Z^2 * p * (1-p)) / E^2

where:

Z = the z-score corresponding to the desired confidence level (95% confidence level corresponds to a z-score of 1.96)

p = the estimated population proportion from the earlier study

E = the desired margin of error

Substituting the given values, we get:

n = (1.96^2 * 0.33 * (1-0.33)) / 0.03^2

n = 753.69

Rounding up to the next integer, we need a sample size of 754. Therefore, we need to select at least 754 people for the experiment to estimate the fraction of people who black out at G forces greater than 6 with an error of at most 0.03 and a 95% confidence level.

Learn more about sample size at  https://brainly.com/question/30123000

#SPJ1