Determine the molarity (M) of 0.2074 g of calcium hydroxide, Ca(OH)₂ (74.09 g/mol), in 40.00 mL of solution.

Consider that after recrystallization, you obtained 7.0 g of dry pure substance from 10.0 g of impure material. Your recovery rate is then 70% (7/10 × 100).

Recrystallization recovery percentages are often lower than 100%, though occasionally they might be higher (see the following issue). This is brought on by impurity loss, material that was left in the liquid solution after dissolving, and "mechanical losses."

The amount if pure compound that is present in the finished chemical synthesis product is calculated using the percent recovery. The ratio of actual yield to theoretical yield is used to compute percent yield. The ratio of the pure compound to the starting compound is used to calculate percent recovery.

To know more about material visit:

https://brainly.com/question/28395976

#SPJ1

I think it is Ba since the radius increases along the group.but decreases along the period

Answer:

Ba

Explanation:

Ba

A concentrated saltwater solution weighing 29.97 g and fitting into a flask to the mark of 25.0 ml has a density of about 1199.2 g/L.

By dividing the solution's mass by its volume, we may get its density: density = mass/volume

We need to know the density of water at the solution's temperature as well as the capacity of the flask up to the 25.0 ml level in order to calculate the volume of the solution.

Since 1 mL = 0.001 L, volume is equal to 25.0 mL, or 0.0250 L.

Now, we may determine the solution's density as follows:

1199.2 g/L or 29.97 g/0.0250 L is what is referred to as density.

To learn more about density visit:

brainly.com/question/26279986

#SPJ9

The sandwich contains approximately 71.25 grams of carbohydrates.

Calories are a unit of measurement used to quantify the amount of energy contained in food and beverages. The number of calories in a particular food is determined by the amounts of carbohydrates, fats, proteins, and other nutrients it contains.

To determine the number of grams of carbohydrates in the sandwich, we need to use the fact that carbohydrates, fats, and proteins have different calorie densities. Specifically, carbohydrates and proteins each contain about 4 calories per gram, while fats contain about 9 calories per gram.

First, let's calculate the total number of calories coming from the fat and protein in the sandwich:

Total calories = calories from carbohydrates + calories from fat + calories from protein

475 Calories = calories from carbohydrates + 10g x 9 Calories/g + 25g x 4 Calories/g

475 Calories = calories from carbohydrates + 90 Calories + 100 Calories

475 Calories - 190 Calories = calories from carbohydrates

285 Calories = calories from carbohydrates

Now that we know the number of calories from carbohydrates, we can use the calorie density of carbohydrates to determine the number of grams of carbohydrates:

285 Calories = carbohydrates in grams x 4 Calories/g

71.25 g = carbohydrates in grams

Therefore, the sandwich contains approximately 71.25 grams of carbohydrates.

Learn more about calories here:

https://brainly.com/question/22374134

#SPJ9

463.5 grams of HCl are required to react with 6.35 moles of CaCO₃.

Mass of one mole of substance is referred to as the molar mass. The molar mass of a substance can be calculated by adding up the atomic masses of all the atoms in a molecule.

Balanced chemical equation for the reaction between calcium carbonate (CaCO₃) and hydrochloric acid (HCl) is: CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂

6.35 mol CaCO₃ * 2 mol HCl / 1 mol CaCO₃ = 12.7 mol HCl

Now, we use the molar mass of HCl (36.46 g/mol) to convert from moles to grams: 12.7 mol HCl * 36.46 g/mol = 463.5 g HCl

Therefore, 463.5 grams of HCl are required to react with 6.35 moles of CaCO₃.

To know more about molar mass, refer

https://brainly.com/question/837939

#SPJ1

3.4 g of HCl is therefore equivalent to roughly 0.0932 moles of HCl.

Since each molecule of HCl contains one mole of hydrogen and one mole of chlorine, the mole quantity of HCl equals the mole quantity of hydrogen and chlorine in the sample.

Approximately 36.46 g/mol is the molar mass of hydrochloric acid (HCl). We must divide the mass by the molar mass to determine the number of moles of HCl in 3.4 g of HCl:

Mass of HCl / molar mass of HCl equals moles of HCl.

3.4 grams per 36.46 grams per mole of HCl

A mole of HCl is equal to 0.0932 mol.

To know more about moles visit:

https://brainly.com/question/9302246

#SPJ1

Answer:

Molecules in the skin are moving faster than molecules in the glass.

Explanation:

Put it in your own words.

Answer:

The energy from the ice transferred to the glass.

The standard change in Gibbs free energy for the given reaction at 25°C is -757.9 kJ/mol.

Gibbs energy, also known as Gibbs free energy, is a thermodynamic quantity used to determine the maximum amount of work that can be obtained from a system at a constant temperature and pressure. It is denoted by the symbol G and is named after the American physicist Josiah Willard Gibbs who introduced the concept in the late 19th century.

Gibbs energy is defined as the difference between the enthalpy of a system and the product of the temperature and the entropy of the system:

G = H - TS

where H is the enthalpy, T is the temperature in Kelvin, and S is the entropy of the system.

The Gibbs energy is related to the equilibrium constant of a reaction through the following equation:

ΔG = -RTlnK

To calculate the standard change in Gibbs free energy for the given reaction at 25°C, we need to use the ΔG°f values (standard Gibbs free energy of formation) for the reactants and products involved in the reaction.

The ΔG°f values for Fe₂O₃(s), Al(s), Al₂O₃(s), and Fe(s) can be found in a table of thermodynamic data and are:

ΔG°f [Fe₂O₃(s)] = -824.2 kJ/mol

ΔG°f [Al(s)] = 0 kJ/mol

ΔG°f [Al₂O₃(s)] = -1582.3 kJ/mol

ΔG°f [Fe(s)] = 0 kJ/mol

The standard change in Gibbs free energy for the reaction can be calculated using the following equation:

Δ°rxn = ΣΔG°f(products) - ΣΔG°f(reactants)

Substituting the values, we get:

Δ°rxn = [ΔG°f(Al₂O₃(s)) + 2ΔG°f(Fe(s))] - [ΔG°f(Fe₂O₃(s)) + 2ΔG°f(Al(s))]

Δ°rxn = [(-1582.3 kJ/mol) + 2(0 kJ/mol)] - [(-824.2 kJ/mol) + 2(0 kJ/mol)]

Δ°rxn = -757.9 kJ/mol

Therefore, the standard change in Gibbs free energy for the given reaction at 25°C is -757.9 kJ/mol.

To know more about Gibbs energy visit:

https://brainly.com/question/20358734

#SPJ1

The Two Aspects of Science: Control over nature and understanding of nature must both be held in equal honor.

The amount that would remain, given that 3 half-lives has pass when you started with 20.0 g is 2.50 grams (1st option)

The following data were obtained from the question:

The amount remaining can be obtained as shown below:

N = N₀ / 2ⁿ

N = 20 / 2³

N = 20 / 8

N = 2.50 grams

Thus, we can conclude from the above calculation that the amount that would remain after 3 half-lives to pass is 2.50 grams (1st option)

Learn more about amount remaining:

https://brainly.com/question/28440920

#SPJ1

Answer:

2.50g

Explanation:

Answer:

Explanation:

dilute solutions of hydrochloric acid (HCl), sulphuric acid (H₂SO₄), and nitric acid (HNO₃) react with active metals to produce a salt and hydrogen gas.

Active metals react strongly and quickly with other elements and compounds due to the electrons in its structure and its ease of sharing the electrons with other elements.

The most active metals are found in Groups 1  and 2 of the Periodic Table (i.e. the left side), and include lithium, potassium, magnesium, and calcium. Metals such as aluminium, lead, and zinc, are less active than magnesium or calcium, but are generally still labelled as 'active'. Metals such as copper, gold, or silver are inactive and will not react.

Therefore, in the provided question, all the metals listed, except for copper, will produce a metal salt + hydrochloric acid. Copper will not react.

In general:

Under the given circumstances, the pressure difference between methane and an ideal gas is 58.5 atm.

An ideal gas is a theoretical gas composed of a large number of small particles that have zero volume, do not interact with each other, and are in constant random motion. The behavior of an ideal gas is described by the ideal gas law, which relates the pressure, volume, temperature, and number of moles of the gas.

The van der Waals equation can be used to figure out the pressure difference between methane and an ideal gas under these circumstances:

(P + a n² / V²)(V - n b) = n R T

where P is the pressure, n is the number of moles, V is the volume, T is the temperature in Kelvin, R is the ideal gas constant (0.08206 L·atm/K·mol), a and b are the van der Waals constants for methane.

First, we can calculate the pressure of an ideal gas under these conditions using the ideal gas law:

P = n R T / V

P = (15.0 mol) (0.08206 L·atm/K·mol) (293.45 K) / (6.00 L)

P = 299.8 atm

Next, we can use the van der Waals equation to calculate the pressure of methane under these conditions:

(P + a n² / V²)(V - n b) = n R T

(P + (2.300 L²·atm/mol²) (15.0 mol)² / (6.00 L)²) ((6.00 L) - (15.0 mol) (0.0430 L/mol)) = (15.0 mol) (0.08206 L·atm/K·mol) (293.45 K)

Simplifying the equation gives:

P + 1.319 atm = 359.6 atm

P = 358.3 atm

As a result, under these circumstances, the pressure difference between methane and an ideal gas is:

ΔP = P (methane) - P (ideal gas) = 358.3 atm - 299.8 atm = 58.5 atm.

To know more about ideal gas law, visit:

https://brainly.com/question/28257995

#SPJ1

The ΔG for the reaction at 298 K and the given partial pressures is -55.53 kJ/mol.

What is ΔG ?

The Gibbs free energy change for a reaction under non-standard conditions can be calculated using the following equation:

ΔG = ΔG° + RTln(Q)

where ΔG is the Gibbs free energy change, ΔG° is the standard Gibbs free energy change, R is the gas constant (8.314 J/(mol·K)), T is the temperature in kelvin, and Q is the reaction quotient.

The reaction quotient, Q, can be calculated using the partial pressures of the gases involved in the reaction:

Q = (P(NH3))² / (P(N2) x P(H2)³)

Plugging in the given values, we get:

Q = (0.75 atm)² / (0.35 atm x 0.30 atm³) = 0.2667

Now we can calculate the ΔG for the reaction:

ΔG = ΔG° + RTln(Q)

ΔG = (-32.8 kJ/mol) + (8.314 J/(mol·K) x 298 K x ln(0.2667))

ΔG = -32.8 kJ/mol + (-22.73 kJ/mol)

ΔG = -55.53 kJ/mol

Therefore, the ΔG for the reaction at 298 K and the given partial pressures is -55.53 kJ/mol.

What is reaction quotient?

Reaction quotient, commonly denoted as Q, is a measure of the relative concentrations of reactants and products in a chemical reaction at a particular moment in time. It is calculated by dividing the concentration of the products raised to their stoichiometric coefficients by the concentration of the reactants raised to their stoichiometric coefficients.

The equation for the reaction quotient Q is similar to the equilibrium constant Kc, but with the concentrations of the reactants and products at any time during the reaction, rather than at equilibrium. When the reaction is at equilibrium, the reaction quotient is equal to the equilibrium constant.

To know more about ΔG, visit:

https://brainly.com/question/13961239

#SPJ1

To determine the size of the entire population: In the equation N = M, replace the variables of M solutions, R (number all marked recaptured), with T (total recaptured during second visit). T R = frac M T R N = RMT.

In order for the mark-recapture method to function, it must be assumed that the proportion the marked organisms that are recaptured inside the second sample corresponds to that of the original marked in the entire population. This equation R(recaptured)/C(captured in second sample)=M(marked initially)/N) illustrates this (total number in population).

It has been suggested that capture-recapture techniques be used to gauge a register's degree of completeness. These techniques were initially created to determine how big a confined animal colony was. The process aims to capture, tag, and release as many animals is possible in a given region all at once. This is known as the "capture" stage.

To know more about solutions visit:

https://brainly.com/question/30665317

#SPJ1

The molality of the solution is 1.080 mol/kg of a 48 grams of MgCl2 is dissolved in 500g of water, density of water = 1 kg/1L.

Taking the moles of solute and dividing it by the kilograms of solvent yields the molality of a solution.

Molality is calculated as follows: kg of solvent/kg of solute

500 g, or 0.500 kg, is the mass of the solvent.

MgCl2 molecular weight divided by its mass gives the amount of moles.

48 g / 95.2 g m o l 1 equals the quantity of moles of magnesium chloride.

0.504 moles of MgCl2 are present in one mole.

Molality is calculated as 0.504moles per kilogram.

Molality is equal to 1.080 mol k g 1.

As stated in the definition, molality is the "total moles of a solute contained in a kilogram of a solvent." The terms "molality" and "molal concentration" are synonymous. It is a measurement of a solvent.

For more information on molality kindly visit to

https://brainly.com/question/26921570

#SPJ1

The reactions with a positive Δrxn are:

A(g) + B(g) ⟶ 3C(g)

A(s) + B(s) ⟶ C(g)

The entropy change (Δrxn) of a reaction indicates the change in the degree of randomness or disorder of the system during the reaction. If the number of product molecules is greater than the number of reactant molecules, the disorder of the system usually increases, resulting in a positive Δrxn. Therefore, we can determine the answer by analyzing the stoichiometry of each reaction:

A(g) + B(g) ⟶ C(g)

In this reaction, the number of product molecules is less than the number of reactant molecules, so the disorder of the system decreases. Therefore, this reaction has a negative Δrxn.

A(g) + B(g) ⟶ 3C(g)

In this reaction, the number of product molecules is greater than the number of reactant molecules, so the disorder of the system increases. Therefore, this reaction has a positive Δrxn.

A(s) + B(s) ⟶ C(g)

In this reaction, the solid reactants are combining to form a gaseous product. The disorder of the system is expected to increase, resulting in a positive Δrxn.

2A(g) + B(g) ⟶ C(g)

In this reaction, the number of product molecules is less than the number of reactant molecules, so the disorder of the system decreases. Therefore, this reaction has a negative Δ rxn.

To know more about entropy, visit:

https://brainly.com/question/13135498

#SPJ1

A)  the activation energy is  = 66.5 kJ/mol

B) the slope of the line in this case would be -8000 K^-1

C)  the temperature at which the rate constant is 1.00x10^-3 M^-1 x s^-1 is 408 K (135°C).

a) To calculate the activation energy, we can use the Arrhenius equation:

k = Ae^(-Ea/RT)

where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant (8.314 J/mol x K), and T is the temperature in Kelvin.

Taking the natural logarithm of both sides of the equation, we get:

ln(k) = ln(A) - (Ea/RT)

We can use the two sets of data to set up two equations:

ln(k1) = ln(A) - (Ea/RT1)

ln(k2) = ln(A) - (Ea/RT2)

Solving for Ea by taking the difference between the two equations:

ln(k2/k1) = (Ea/R) [(1/T1) - (1/T2)]

Ea = -R ln(k2/k1) / [(1/T1) - (1/T2)]

Plugging in the values:

Ea = -8.314 J/mol x K x ln(2.07x10^-2 / 3.97x10^-3) / [(1/398 K) - (1/398 K)]

Ea = 66.5 kJ/mol

b) In an Arrhenius plot, ln(k) is plotted against 1/T, and the slope of the line is equal to -Ea/R. Therefore, the slope of the line in this case would be:

slope = -Ea/R = -(66.5 x 10^3 J/mol) / (8.314 J/mol x K) = -8000 K^-1

c) To solve for the temperature at which the rate constant is 1.00x10^-3 M^-1 x s^-1, we can rearrange the Arrhenius equation:

k = Ae^(-Ea/RT)

ln(k) = ln(A) - (Ea/RT)

1/T = (ln(k) - ln(A)) / (-Ea/R)

T = -R / (Ea ln(k) - ln(A))

Plugging in the values:

T = -8.314 J/mol x K / [(66.5 x 10^3 J/mol) ln(1.00x10^-3) - ln(3.97x10^-3)]

T = 408 K

Therefore, the temperature at which the rate constant is 1.00x10^-3 M^-1 x s^-1 is 408 K (135°C).

Learn more on  Arrhenius equation here https://brainly.com/question/14739712

#SPJ1

A compound formed between two or more non-metal elements that share electrons is called a covalent compound or a molecular compound.

In covalent compounds, the atoms share electrons in order to achieve a full outer shell of electrons and become more stable. Covalent compounds typically have low melting and boiling points, are often gases or liquids at room temperature, and are poor conductors of electricity. Examples of covalent compounds include water (H2O), carbon dioxide (CO2), and methane [CH4].

Learn more about covalent compound

https://brainly.com/question/19365992

The volume of [tex]SO_{3}[/tex] would be produced by complete reaction of 100cm3 of [tex]H_{2}O[/tex]with [tex]O_{2}[/tex] is at STP is 60.03L.

22.4 L divided by 2.68 moles per mole yields 60.03 L [tex]SO_{3}[/tex].

describing the elements contributing to the response,

[tex]2SO_{2(g)}+ O_{2} = 2SO_{3}[/tex]

In this instance, [tex]SO_{3}[/tex] and [tex]O_{2}[/tex] have a mole ratio of 2:1. Assume the reaction takes place at STP, where 1 mole of any gas has a volume of 22.4 L. Consequently, 30 [tex]dm^{3}[/tex]of [tex]O_{2}[/tex] (1 dm3 = 1 L) equals 30 L of [tex]O_{2}[/tex] and 30 L/22.4 L times 1 mole equals 1.34 moles of [tex]O_{2}[/tex].

According to stoichiometry, when 1.34 moles of [tex]O_{2}[/tex]are reacted with [tex]SO_{2}[/tex], 2.68 moles of [tex]SO_{3}[/tex] are created, or 2/1 x 1.34 moles of [tex]SO_{3}[/tex].

This means that the amount of [tex]SO_{3}[/tex]produced will be (2.68 moles/1 mole) x 22.4 L = 60.03 L [tex]SO_{3}[/tex].

For more information on STP kindly visit to

https://brainly.com/question/24050436

#SPJ1

The compound's boiling point is around 73.65 °C.

Unexpected Responses. Favorable reactions are those that cause the system's enthalpy to drop while its entropy rises. The reaction happens naturally when both of these conditions are true. Both endothermic and exothermic reactions, which absorb heat and release it, can occur spontaneously.

We can use the Gibbs-Helmholtz equation to solve for the boiling point:

ΔG = ΔH - TΔS

At boiling point, ΔG = 0, so we can solve for T:

T = ΔH/ΔS

Substituting the given values:

T = (32.77 kJ·mol−1) / (94.72 J·mol−1·K−1)

T = 346.8 K

Converting to Celsius:

Boiling point = 346.8 K - 273.15 = 73.65 °C

To know more about boiling point visit:-

https://brainly.com/question/2153588

#SPJ1

Answer: The units for molarity are moles/liter.

Similarly, the equation to find molarity is moles divided by liters.

Explanation:  

mol / L is a unit of molar concentration. These are the number of moles of dissolved material per liter of solution. 1 mol / L is also called 1M or 1molar. Mol / m3 is also a unit of molar concentration.

Molarity is expressed in units of moles per liter (mol / L). This is a very common unit, so it has its own symbol, which is the uppercase M. A solution with a concentration of 5 mmol / l is called a 5 M solution or has a concentration value of 5 mol.

The molar concentration of the solution is equal to the number of moles of the solute divided by the mass of the solvent (kilogram), and the molar concentration of the solution is equal to the number of moles of the solute divided by the volume of the solution (liter). increase.

Answer: Oxygen (??)

Explanation: Im not sure but smth like H2O (my brain is not braining T-T)

The reaction [tex]2NH_3=N_2H_4+H_2[/tex] has a standard reaction free energy of -62.4 kJ/mol.

Energy is the capacity to carry out tasks or affect change. It comes in a variety of shapes and sizes, including kinetic energy (energy of motion), potential energy (stored energy of position), thermal energy (heat), electrical, chemical, and nuclear energy. Energy is required for the survival and growth of all living things. Additionally, it is necessary for the operation of industries and equipment.

Equation can be used to get a reaction's standard reaction free energy.

ΔG°rxn = ΣΔG°f (products) - ΣΔG°f (reactants).

For the reaction [tex]2NH_3=N_2H_4+H_2[/tex], the ΔG°f values are as follows:

ΔG°f ([tex]2NH_3[/tex]) = -46.2 kJ/mol

ΔG°f ([tex]N_2H_4[/tex]) = -20.8 kJ/mol

ΔG°f ([tex]H_2[/tex]) = 0 kJ/mo

The equation yields the average reaction free energy (ΔG°rxn) of the reaction is:

ΔG°rxn = (2 x -20.8) - (-46.2)

            = -62.4 kJ/mol

To learn more about energy, visit:

brainly.com/question/29339318

#SPJ1

The mass of calcium in the original urine sample would be 0.0140 g.

First, we need to find the masses of calcium and magnesium oxalates in the original sample. Let x be the mass of calcium oxalate and y be the mass of magnesium oxalate. Then we have:

x + y = mass of the mixed oxalate precipitate

Next, we need to use the information given to find the mass of calcium in the original sample. The mass of calcium oxide formed after ignition is equal to the mass of calcium oxalate in the original sample. We can calculate the mass of calcium oxide using the mass of calcium carbonate formed and the molar mass ratio of calcium carbonate to calcium oxide.

The balanced chemical equations for the reactions are:

CaC2O4 -> CaCO3 + CO2

CaCO3 -> CaO + CO2

The molar mass of CaCO3 is 100.09 g/mol, and the molar mass of CaO is 56.08 g/mol.

From the given information, we have:

0.0433 g = (x + y)(100.09 g/mol + 80.15 g/mol) / (128.10 g/mol + 80.15 g/mol)

0.0285 g = x(56.08 g/mol) + y(40.31 g/mol)

Solving these equations simultaneously, we get:

x = 0.0140 g

y = 0.0053 g

Therefore, the mass of calcium in the original sample (which is equal to the mass of calcium oxide formed after ignition) is:

0.0140 g

So the mass of calcium in the original sample is 0.0140 g.

More on stoichiometric problems can be found here: https://brainly.com/question/29775083

#SPJ1

Because it is not very effective at transferring [tex]H^{+}[/tex] ions to water, vinegar is a weak acid. Less than 0.4% of the [tex]CH_{3}CO_{2}H[/tex]molecules in a 1 M solution interact with water to create [tex]H_{3}O^{+}[/tex]and [tex]CH_{3}CO_{2}^{-}[/tex] ions. More than 99.6% of the acetic acid molecules are still whole.

For more information on weak acid kindly visit to

https://brainly.com/question/22104949

#SPJ1

Answer:

strength in ionic compounds.

Explanation:

:)

Lattice energy is an estimate of the bond of strength. It denotes the amount of energy required to break down one mole of a solid ionic compound into its constituent gaseous ions.

The strength of an ionic compound's ionic bonds is measured by lattice energy. It explains several properties of ionic solids, including their volatility, solubility, and hardness. An ionic solid's lattice energy cannot be measured directly.

The higher an ionic compound's lattice energy, the more difficult it is to disassemble the crystal lattice structure and dissolve it in water. As a result, compounds with high lattice energies are less soluble in water than those with low lattice energies.

The value of lattice energy is determined by the charges on the two ions as well as the distance between them. The distance between the ions is directly proportional to their size.

To know more about Lattice Energy visit:

https://brainly.com/question/20590677

#SPJ1

Complete question:

Lattice energy is an estimated bond of the bond:

A. conductivity

B. group

C. length

D. strength

Choose the correct option.