determine the percent ionization of a solution having a ph of 4.35 and an initial weak acid concentration of 0.00019.

The molecular equation for the gas evolution reaction between aqueous hydrobromic acid (HBr) and aqueous lithium sulfite (Li2SO3) is as follows:  2 HBr (aq) + [tex]Li_{2} So_{3}[/tex] (aq) → 2 LiBr (aq) + [tex]H_{2} So_{3}[/tex] (aq)

In this reaction, hydrobromic acid (HBr) reacts with lithium sulfite ([tex]Li_{2} So_{3}[/tex]) to form lithium bromide (LiBr) and sulfurous acid ([tex]H_{2} So_{3}[/tex]). The sulfurous acid is unstable and decomposes into water( [tex]H_{2o[/tex]) and sulfur dioxide gas ([tex]So_{2}[/tex]):

[tex]H_{2} So_{3}[/tex] (aq) → [tex]H_{2} 0[/tex]l) + [tex]So_{2}[/tex] (g)

The overall reaction is:

2 HBr (aq) + [tex]Li_{2} So_{3}[/tex] (aq) → 2 LiBr (aq) + [tex]H_{2} o[/tex] (l) + [tex]So_{2}[/tex] (g)

In this gas evolution reaction, the mixing of the two aqueous solutions results in the formation of a new compound, lithium bromide, which remains dissolved in the solution. The other product, sulfurous acid, decomposes into water and sulfur dioxide gas, which is released as bubbles in the solution. This release of gas is the characteristic feature of gas evolution reactions.

Know more about sulfurous acid      here:

https://brainly.com/question/1084323

#SPJ11

Answer:

pressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the newpressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the new volume of the balloon (in ml) at constant temperature

Answer:

1. Ans: B

Explanation: Pinakbet, which contains vegetables such as eggplants and kalabasa, are physically combined. Therefore, the pinakbet is an example of a mixture

2. Ans: A

Explanation: Heterogenous are different building blocks that are mixed UNEVENLY.

The energy of a photon with a wavelength of 410 nm is equal to 3.03 eV.

To calculate this, you can use the formula E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength. Plugging in the values, you get E = (6.626x10⁻³⁴J·s)(3.0x10⁸m/s)/(410x10⁻⁹m) = 4.839 × 10-19 J = 3.03 eV.

An atomic transition produces a photon with a wavelength of 410 nm. The energy of this photon is 3.03 eV.

The following formula can be used to calculate the energy of a photon.

Energy = Planck's constant x (speed of light/wavelength).

Here, Planck's constant is (h) = 6.626 × 10⁻³⁴ J s. The speed of light is (c) = 3 × 10⁸m/s (in a vacuum). The wavelength of the photon is (λ) = 410 nm.

So, let's first convert the wavelength to meters (1 nm =10⁻⁹ m).

So, 410 nm = 410 × 10⁻⁹ m = 4.10 × [tex]10^{-7}[/tex]m. Now, we can calculate the energy of the photon using the formula.

Energy = h x (c/λ)

Energy = 6.626 × 10⁻³⁴ J s x (3 × 10⁸ m/s / 4.10 × [tex]10^{-7}[/tex] m)

Energy = 4.839 × [tex]10^{-19}[/tex] J (joules)

One electron volt is equal to 1.6 × [tex]10^{-19}[/tex]J.

So, we can convert the energy from joules to electron volts.

Energy (in eV) = Energy (in J) / (1.6 × [tex]10^{-19}[/tex]J/eV)

Energy (in eV) = 4.839 × [tex]10^{-19}[/tex]J / (1.6 × [tex]10^{-19}[/tex]J/eV)

Energy (in eV) = 3.03 eV

Therefore, the energy of the photon is 3.03 eV.

For more questions related to Planck's constant.

https://brainly.com/question/2289138

#SPJ11

An electrolyte solution is one that contains ions. The correct option is d.

Learn more about electrolyte solutions: https://brainly.com/question/14654936

#SPJ11

The set of compounds arranged in order of increasing magnitude of lattice energy is CsI < NaCl < MgS.

Lattice energy refers to the energy needed to dissociate a solid ionic crystal into gaseous ions. This energy is needed to overcome the electrostatic attraction between the ions of an ionic crystal. As a result, ionic crystals with higher charge and smaller size have higher lattice energies.

The lattice energies of the set of compounds CsI, NaCl, and MgS can be compared. The compound with the highest lattice energy is CsI because it has the highest charge and smallest size among the given compounds. Thus, the order of lattice energies would be:

CsI < NaCl < MgS

In summary, in order of increasing magnitude of lattice energy, the set of compounds can be arranged as CsI < NaCl < MgS.

Learn more about Lattice energy here: https://brainly.com/question/25682087.

#SPJ11

One common reaction that produces carbon dioxide in organic chemistry workup is the reaction between sodium bicarbonate (NaHCO₃) and an acid.

When an acidic solution is added to a mixture containing sodium bicarbonate, carbon dioxide gas is produced as a result of the following reaction:

NaHCO₃ + H+ → Na+ + CO₂ + H₂O

The carbon dioxide gas will then bubble out of the mixture and can be collected in a separate container or released into the air.

In a separatory funnel workup, this reaction may be used to remove excess acid from an organic reaction mixture. The mixture is first extracted with a suitable organic solvent, and then an aqueous solution of sodium bicarbonate is added to the separatory funnel. The acidic components in the mixture will react with the sodium bicarbonate to produce carbon dioxide, which will bubble out of the mixture and can be released through the stopcock

To learn more about reaction refer to:

brainly.com/question/29039149

#SPJ4

the molality of solutes in the aqueous solution is 0.182 molal.

⇒m = (molality) = (Δ[tex]T_f[/tex]) / ([tex]K_f[/tex] × w2)

We have to calculate the molality of solutes in the solution by using the freezing-point depression constant and freezing-point depression of the aqueous solution.

Now, Substituting the given values, we get,

⇒ m = (Δ[tex]T_f[/tex]) / ([tex]K_f[/tex] × w2)

⇒ m = 0.34 / (1.86 × w2)

⇒ m = 0.182 molal

Therefore, the molality of solutes in the solution is 0.182 molal.

Learn more about molality: https://brainly.com/question/1370684

#SPJ11

The ratio of [HCO₃⁻] to [HCO₂H] in an acetate buffer is 5.01.

The ratio of [HCO₃⁻] to [HCO₂H] (formic acid) in an acetate buffer at pH 4.50 is determined by the Henderson-Hasselbalch equation:

pH = pKa + log ([HCO₃⁻]/[HCO₂H]).
[HCO₃⁻]/[HCO₂H] = 10^(pH-pKa)
= 10^(4.50 - 3.80)
= 5.01


To further understand the buffering capacity of an acetate buffer, we must first understand the role of formic acid and bicarbonate in an acetate buffer.

Formic acid is an organic acid and bicarbonate is a salt of carbonic acid. Both of these species can form and break down as needed to maintain the pH of the buffer.

As the pH of the buffer is increased, the formic acid will break down, forming more bicarbonate.

On the other hand, as the pH of the buffer is decreased, more formic acid will form, resulting in fewer bicarbonate ions.

The buffering capacity of an acetate buffer is dependent on the relative concentrations of formic acid and bicarbonate ions, and these concentrations can vary depending on the pH of the buffer.

In summary, the ratio of [HCO₃⁻] to [HCO₂H] is found to be 5.01 in an acetate buffer at pH 4.50.

To know more about acetate buffer, refer here:

https://brainly.com/question/16970860#

#SPJ11

The concentration of sulfuric acid that remains after neutralization is 0.056 M.

To find out what concentration of sulfuric acid remains after neutralization, you will need to use the balanced equation for the reaction:

H2SO4 + 2KOH → K2SO4 + 2H2O

First, you will need to determine the moles of each reactant in the solution.

Moles can be determined using the formula:

moles = concentration x volume

In this case:

moles of H2SO4 = 0.850 L x 0.400 M = 0.34 mol

moles of KOH = 0.800 L x 0.250 M = 0.2 mol

Since the reaction is a 1:2 ratio, you will need to determine which reactant is limiting the reaction.

To do this, compare the mole ratios of the reactants:

0.34 mol H2SO4 : 0.2 mol KOH = 1.7 : 1

Since the ratio of H2SO4 to KOH is greater than 1:2, KOH is the limiting reactant. Therefore, all of the KOH is used up in the reaction, leaving some H2SO4 unreacted.

To find the amount of H2SO4 remaining, you will need to use the mole ratio of H2SO4 to KOH.

Since 2 moles of KOH react with 1 mole of H2SO4, you can use the mole ratio:

0.2 mol KOH x (1 mol H2SO4 / 2 mol KOH) = 0.1 mol H2SO4 remaining

Finally, you can determine the concentration of the H2SO4 remaining:

concentration = moles / volume

concentration = 0.1 mol / (0.850 L + 0.800 L)

concentration = 0.056 M

Therefore, the concentration of sulfuric acid that remains after neutralization is 0.056 M.

For more such questions on concentration, click on:

https://brainly.com/question/28564792

#SPJ11

Double replacement or metathesis reaction involves the exchange of ions between two compounds.

Combination or synthesis reaction is a  type of reaction that  involves two or more reactants combining to form a single product. The general format is A + B → AB.

Decomposition reaction involves a single reactant breaking down into two or more products. The general format is AB → A + B.

The matching of the letters are;

1 - C

2 - H

3 - E

4 - F

5 - A

6 - B

7 - I

8 - J

9 - G

10 - D

1) False

2) False

3) True

4) False

5) True

6) True

7) True

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

To determine the volume of NaOH used to reach the equivalence point of the titration using the titration data, we need to find the point where the acid and base are neutralized.

At this point, the moles of acid and base are equal, and this is called the equivalence point.To find the volume of NaOH used at the equivalence point, we can use the following

Steps:1. Plot the titration data on a graph of pH versus volume of NaOH added.

Steps:2. Identify the point where the pH changes abruptly. This is the equivalence point.

Steps:3. Determine the volume of NaOH added at the equivalence point by reading the volume from the graph.

Steps:4. Compare the volume of NaOH used at the equivalence point of the titration with the predicted volume calculated above.The extent of agreement with the predicted volume can be assessed by calculating the percent error.

The percent error is calculated using the formula:

                                      Percent error = [(experimental value - theoretical value) / theoretical value] x 100

If the percent error is small, then the agreement is good. If the percent error is large, then there is a significant difference between the predicted and experimental values.

Learn more about equivalence point of the titration here, https://brainly.com/question/31181892

#SPJ11

At the equivalence point of a titration between 24.6 mL of 0.389 M ethylamine, C2H5NH2, and 0.325 M hydroiodic acid, the pH is 0.

At the equivalence point of a titration between 24.6 mL of 0.389 M ethylamine, C2H5NH2, and 0.325 M hydroiodic acid, the pH is 0. The equation for the reaction is:

C2H5NH2 + HI → C2H5NH3+ + I-

The number of moles of hydroiodic acid, HI, needed to reach the equivalence point is equal to the number of moles of ethylamine, C2H5NH2. To calculate this, use the following equation:

Moles of HI = Moles of C2H5NH2

Volume of C2H5NH2 x Molarity of C2H5NH2 = Volume of HI x Molarity of HI

24.6 mL x 0.389 M = Volume of HI x 0.325 M

Volume of HI = 24.6 mL x 0.389 M / 0.325 M

Volume of HI = 30.53 mL

At the equivalence point, the pH of the solution is 0.

Learn more about titration here:

https://brainly.com/question/2728613#

#SPJ11

When determining the energy effect of a chemical reaction, the system is/are reactants and products and the surroundings are everything outside the system.

When determining the energy effect of a chemical reaction, the system and surroundings are involved. The system refers to the reactants and products involved in the chemical reaction, whereas the surroundings refer to everything else outside the system, including the temperature, pressure, and any other factors that can affect the reaction.

The energy effect of a chemical reaction can be determined by calculating the difference between the energy of the products and the energy of the reactants. This difference is known as the energy change or the enthalpy change of the reaction.

If the energy change is positive, it means that the reaction is endothermic, and energy is absorbed from the surroundings. This results in a decrease in the temperature of the surroundings.

On the other hand, if the energy change is negative, it means that the reaction is exothermic, and energy is released into the surroundings. This results in an increase in the temperature of the surroundings.

It is important to note that the energy effect of a chemical reaction can also be affected by external factors such as pressure, temperature, and the presence of a catalyst.

In conclusion, the system is the reactants, and the products and surroundings are factors like temperature and pressure, i.e., everything outside the system.

To know more about reactants, refer here:

https://brainly.com/question/13005466#

#SPJ11

The pKₐ of a 0.109M solution of a weak acid (HA) is 4.50 and pKₐ arranged to 4 decimal places is 4.5000.

The pH of a solution of a weak acid can be used to determine the pKₐ of the acid. The pKa is the negative logarithm of the acid dissociation constant (Kₐ). In other words, pKₐ = -log Kₐ.

To calculate the pKₐ of a weak acid, we can use the following equation:

pKₐ = pH + log (base concentration/acid concentration).

In this case, we are given a 0.109 m solution of a weak acid (HA) with a pH of 4.50.

To calculate the pKₐ, we need to know the concentration of the acid and the concentration of the base. Since we do not know the concentrations, we can assume that the acid and base concentrations are equal and equal to 0.109 m.

Using the equation above, we can calculate the pKₐ as follows:

pKₐ = 4.50 + log (0.109 / 0.109) = 4.50 + 0 = 4.50.

Therefore, the pKₐ of the weak acid (HA) comes out to be 4.50, and rearranging it to four decimal places gives the answer as 4.5000.

To know more about pKₐ, refer here:

https://brainly.com/question/30419524#

#SPJ11

To transform an alkene bonded to a tert-butyl group and three hydrogens to a tert-butyl group bonded to CH2CH2OH, the best reagents are H2SO4 and H2O.

H2SO4 is used to protonate the double bond and form a carbocation, which can then undergo nucleophilic attack by water to form the final product. This reaction is known as hydration of alkenes.To perform the transformation, the alkene is first protonated with H2SO4 to form a carbocation intermediate.

Water acts as a nucleophile and attacks the carbocation to form the alcohol product. This reaction is shown below:Thus, the final product formed is tert-butyl group bonded to CH2CH2OH.Another way to perform this transformation is by using oxymercuration-demercuration.

In this reaction, the alkene is first treated with mercuric acetate and water to form a cyclic intermediate.

Know more about nucleophile here:

https://brainly.com/question/27127109

#SPJ11

(a) If the pressure is 10.0 atm, the temperature is 62.0 K.

(b) if the temperature is 225 k, the pressure is 36.3 atm.

a) In order to calculate the temperature, we need to use the ideal gas law, PV = nRT, where P is the pressure, V is the volume of the container, n is the number of moles of argon, R is the ideal gas constant, and T is the temperature.

We can calculate the number of moles, n, by using the molar mass of argon, which is 39.948 g/mol.

We have n = 186 g / 39.948 g/mol = 4.656 mol.

So we can plug in our values and solve for T:

T = (10.0 atm)(2.37 L) / (4.666 mol)(0.08206 L·atm/mol·K) = 62.0 K.

b) To calculate the pressure, we can again use the ideal gas law, PV = nRT. We know the values of n, R, and T from the previous question.

Since the volume of the container is given, we can plug in these values to solve for P:

P = (4.666 mol)(0.08206 L·atm/mol·K)(225 K) / 2.37 L = 36.3 atm.

Learn more about ideal gas law here: https://brainly.com/question/27870704.

#SPJ11

The given statement "The electron-domain geometry of a species is the arrangement of electron around the central atom, whereas the molecular geometry is the arrangement of bonded . two species with the same electron-domain geometry may have different molecular geometries" is true as the molecular geometry is  arrangement of the bonded atoms.

Electron-domain geometry is the arrangement of the electron pairs around the central atom in the molecule. It is  called as the molecular geometry or called the electron-pair geometry.

The Molecular geometry is also known as molecular structure, and is the three -dimensional structure or the arrangement of the atoms in the molecule. The statement is true.

To learn more about geometry here

https://brainly.com/question/18612295

#SPJ4

The Rutherford's model lacks an atom's electrical structure and electromagnetic radiation.

According to the idea, an atom has a tiny, compact, positively charged center called a nucleus, where almost all of the mass is concentrated, while light, negatively charged particles called Like planets circle the Sun, electrons also travel a great distance around it. Rutherford discovered that an atom's interior is mostly empty.

Rutherford's alpha scattering experiment did not come to any conclusions on how quickly positively charged particles travel. The nucleus, or core, of the atom contains the positively charged particles.

To know more about Rutherford's model visit:-

https://brainly.com/question/11749615

#SPJ1

When sodium chloride is added to 100 grams of water in a styrofoam cup and the temperature decreases from 25°C to 24°C while stirring with a thermometer, the thermodynamics of dissolving NaCl in water can be said to be endothermic.

Explanation: Thermodynamics is the science that studies the connection between heat, work, and energy. A study of energy transformation in various processes, including chemical reactions, phase transitions, and changes in temperature and pressure, is included in thermodynamics.

When sodium chloride is dissolved in water, an endothermic reaction occurs, meaning that the surroundings absorb heat. Heat is absorbed by the surroundings during an endothermic reaction, resulting in a decrease in temperature in the reaction vessel.

When NaCl is dissolved in water, the same thing happens. Heat is absorbed from the surroundings to dissolve the salt, resulting in a decrease in temperature. As a result, the thermodynamics of dissolving NaCl in water is endothermic.

To know more about thermodynamics , refer here:

https://brainly.com/question/1368306#

#SPJ11

The term for the shorthand description of the arrangement of electrons by sublevels according to increasing energy is electron configuration.

This means that electrons are arranged in the atom in the order of increasing energy. The order follows the patterns of the periodic table and consists of the following components:

These components are usually written in shorthand notation, with the principal quantum number first, followed by a letter for the azimuthal quantum number, and then a number for the magnetic quantum number. For example, the shorthand for the electron configuration of hydrogen is 1s1, where 1 is the principal quantum number, s is the azimuthal quantum number, and 1 is the magnetic quantum number.

Learn more about electron configuration here: https://brainly.com/question/26084288.

#SPJ11

The theoretical yield of diazotized sulfanilic acid can be calculated by multiplying the molar ratio of sulfanilic acid (the limiting reagent) to methyl orange by the molar mass of sulfanilic acid. The molar ratio of sulfanilic acid to methyl orange is 1:1, and the molar mass of sulfanilic acid is 243.26 g/mol. Therefore, the theoretical yield of diazotized sulfanilic acid is 243.26 g/mol.

To calculate the theoretical yield of methyl orange, we need to know the molar ratio of methyl orange to diazotized sulfanilic acid. This is determined by the reaction conditions, and typically the molar ratio of methyl orange to diazotized sulfanilic acid is 3:2. This means that for every 3 moles of methyl orange, 2 moles of diazotized sulfanilic acid are required. The molar mass of methyl orange is 384.2 g/mol. Multiplying the molar ratio (3:2) by the molar mass of methyl orange yields a theoretical yield of 576.3 g/mol.

In conclusion, the theoretical yield of diazotized sulfanilic acid is 243.26 g/mol, and the theoretical yield of methyl orange is 576.3 g/mol.

To know more about theoretical yield click here:

https://brainly.com/question/14966377

#SPJ11

The mass percent of hydrogen in sodium bicarbonate (NaHCO3) is 1.20% (to the hundredths place).

To determine the mass percent of hydrogen (H) in sodium bicarbonate (NaHCO3), we need to first calculate the molar mass of NaHCO3, which is:

NaHCO3 = 1(Na) + 1(H) + 1(C) + 3(O)

= 23.00 + 1.01 + 12.01 + (3 x 16.00)

= 84.01 g/mol

The mass of hydrogen in one mole of NaHCO3 is 1.01 g, since there is only one hydrogen atom in each molecule of NaHCO3.

Therefore, the mass percent of hydrogen in NaHCO3 can be calculated as follows:

mass percent H = (mass of H / mass of NaHCO3) x 100%

= (1.01 g / 84.01 g) x 100%

= 1.20%

For more question on sodium bicarbonate click on

https://brainly.com/question/1596599

#SPJ11

For precipitation to occur, the value of Qsp (the ion product constant) should be greater than the solubility product constant (Ksp).

Precipitation is the conversion of a dissolved substance into a solid, which then settles out of a solution. Precipitation occurs when a liquid solution is cooled or heated, causing it to become super-saturated with one or more solutes. A solution's super-saturation means that it contains more of a solute than it can contain at equilibrium.

A tiny seed crystal of the solute is added to the solution to kick off the precipitation. The seed crystal provides a template for the rest of the solute to nucleate and form a solid. For precipitation to occur, the value of Qsp (the ion product constant) should be greater than the solubility product constant (Ksp). When Qsp is greater than Ksp, the solution is supersaturated and precipitates are formed. If Qsp is less than Ksp, the solution is unsaturated and no precipitation occurs.

Learn more about solution at:

https://brainly.com/question/16159788

#SPJ11

The statement that "when two solutions containing ions as solutes are combined and a reaction occurs, it is always a single-replacement reaction" is False.

When two solutions containing ions as solutes are combined and a reaction occurs, it is not always a single-replacement reaction.

The type of reaction that will occur depends on the reactants and the conditions of the reaction.

For example, if two solutions containing different metal ions are mixed together, a double-replacement reaction may occur, in which two ionic compounds are formed.

Similarly, a precipitation reaction may occur if the combination of the two solutions produces an insoluble product.

In general, single-replacement reactions involve one element replacing another element in a compound, and occur when one of the reactants is an elemental solid, such as a metal.

To know more about solutes, refer here:

https://brainly.com/question/7932885#

#SPJ11

Acetic acid has a ka of 1.80x10-5. The pH of a buffer solution made from 0.150 m hc2h3o2 and 0.530 m c2h3o2 is 4.76.

The pH of a buffer solution produced from 0.150 M HC2H3O2 and 0.530 M C2H3O2 is 4.76.

The following are the steps to solve the problem:

Acetic acid is a weak acid with the formula CH3COOH, which is also known as ethanoic acid.

HC2H3O2 is the molecular formula for this substance.

Acetic acid has a Ka of 1.8 x 10-5.

The ionization of acetic acid can be expressed as follows: CH3COOH + H2O ↔ H3O+ + CH3COO-

The ionization constant, Ka, is equal to the product of the concentration of H3O+ and CH3COO- ions divided by the concentration of CH3COOH.

Hence, Ka = ([H3O+] [CH3COO-])/[CH3COOH]

The Henderson-Hasselbalch equation is used to compute the pH of a buffer solution.

pH = pKa + log (base/acid), where pKa = -logKa.

In the equation, the base is C2H3O2-, and the acid is HC2H3O2.

Substituting the values in the equation, pH = -log1.8 x 10-5 + log(0.530/0.150) = 4.76.

Therefore, the pH of a buffer solution produced from 0.150 M HC2H3O2 and 0.530 M C2H3O2 is 4.76.

To know more about pH calculation, refer here:

https://brainly.com/question/1195974#

#SPJ11

The total mass of precipitate (BaSO4) that can be produced is 175.6 grams.

Total mass refers to the weight of the shell, its service and structural apparatus, and the largest cargo permitted to be carried

To determine the mass of precipitate that can be produced when solutions of barium chlorate and lithium sulfate are mixed, we need to first write and balance the chemical equation for the reaction:

Ba(ClO3)2 (aq) + Li2SO4 (aq) → BaSO4 (s) + 2LiClO3 (aq)

The balanced equation shows that for every one mole of barium chlorate that reacts, one mole of barium sulfate is produced. Therefore, we need to calculate the number of moles of barium chlorate in the solution to determine the maximum amount of barium sulfate that can be formed.

First, we need to calculate the number of moles of barium chlorate in the solution:

Mass of solid barium chlorate = 300 g

Molar mass of barium chlorate = 2 x atomic mass of Ba + 6 x atomic mass of Cl + 6 x atomic mass of O = 2(137.33 g/mol) + 6(35.45 g/mol) + 6(16.00 g/mol) = 398.22 g/mol

Number of moles of barium chlorate = mass / molar mass = 300 g / 398.22 g/mol = 0.753 mol

Next, we need to calculate the maximum amount of barium sulfate that can be formed from this amount of barium chlorate:

According to the balanced equation, 1 mole of Ba(ClO3)2 produces 1 mole of BaSO4

Therefore, the maximum number of moles of BaSO4 that can be formed is also 0.753 mol

Finally, we can calculate the mass of BaSO4 that can be formed using its molar mass:

Molar mass of BaSO4 = atomic mass of Ba + atomic mass of S + 4 x atomic mass of O = 137.33 g/mol + 32.06 g/mol + 4(16.00 g/mol) = 233.39 g/mol

Mass of BaSO4 = number of moles x molar mass = 0.753 mol x 233.39 g/mol = 175.6 g

Therefore, the total mass of precipitate (BaSO4) that can be produced is 175.6 grams.

Learn more about total mass

https://brainly.com/question/17552181

#SPJ1

Yes, it is true that the electronic configuration of O2- is 1s2 2s2 2p6.

Arrangement of electrons in orbitals around atomic nucleus is called electronic configuration and describes how electrons are distributed in its atomic orbitals.

When oxygen atom gains two electrons to form an O2- ion, the two electrons occupy the lowest energy level available, which is the 2s orbital. Therefore, the electronic configuration of O2- is the same as that of neon (1s2 2s2 2p6), which has a full outermost shell of electrons. This noble gas configuration makes the O2- ion stable and less likely to react with other elements.

To know more about electronic configuration, refer

https://brainly.com/question/26084288

#SPJ1

The first reaction results in: the formation of two molecules of pyruvate,

while the second reaction: regenerates the molecules of ATP and NAD+ used in the preparatory and cleavage phases.

The reactions of glycolysis can be divided into three distinct phases: preparatory, cleavage, and payoff.

The preparatory phase is the first stage of glycolysis and involves two key steps: the conversion of glucose to glucose-6-phosphate and the isomerization of glucose-6-phosphate to fructose-6-phosphate. These reactions are important for ensuring that the glucose molecule is in a suitable form for the next phase.

The cleavage phase is the second stage of glycolysis. In this phase, a total of four high-energy phosphate bonds are formed and the glucose molecule is split into two three-carbon molecules, known as glyceraldehyde-3-phosphate.

Finally, the payoff phase is the last stage of glycolysis and involves two reactions. The first reaction results in the formation of two molecules of pyruvate, while the second reaction regenerates the molecules of ATP and NAD+ used in the preparatory and cleavage phases.

To know more about glycolysis refer here:

https://brainly.com/question/30828407#

#SPJ11