Answer:
The disruption of the bonds or attractions occurs during protein hydrolysis which results in the loss for the primacy structure. The peptide bonds is the bond affected in this scenario.
The disruption of the bonds however only exist in the process of denaturation and this results in a change in the confirmation which could be secondary, tertiary, and quaternary structural related. And example of the bonds affected include salt bridges, disulfide bridges, hydrogen bonds etc.
why are copper pipes used in place of old lead pipes for plumbing systems?
Based on the visible cell structure, which of the following statements is true?
Answer:I think it would be the third one.
Explanation:
Use the periodic table to identify the chemical symbol or name for each element below.
zirconium:
zr
rhenium:
re
: As
: K
tin:
yttrium:
: Yb
Answer:
zirconium is Zr
rhenium is Re
As is arsenic
K is potassium
tin is Sn
yttrium is Y
ytterbium is Yb
Explanation:
With the help of the periodic table, the identification of the chemical symbol or name for each element is represented as follows:
Zirconium: Zr. Rhenium: Re. Arsenic: As.Potassium: K.Tin: Sn. Yttrium: Y. Ytterbium: Yb. What are the chemical elements?Chemical elements may be defined as any type of substance that cannot be further decomposed into simpler substances through the utilization of other ordinary chemical processes or external factors. These elements possess specific physical as well as chemical properties distinctly.
In the modern periodic table, each element is arranged on the basis of its increasing atomic number. Each element possesses its unique symbol, atomic mass, and physical properties like boiling points, melting points, density, etc.
Therefore, with the help of the periodic table, the identification of the chemical symbol or name for each element is well represented above.
To learn more about the Periodic table, refer to the link:
https://brainly.com/question/15987580
#SPJ2
A proton is a very tiny particle inside an atom. The mass of a proton is
estimated to be 0.00000000000000000000000167 g. What is the mass of a
proton in scientific notation?
Answer:
1.67 ×10^-24g
Explanation:
counting from the first digit after the point till I got to the first non zero digit
PLEASE HELP AND FAST!!!
Determine the value of the equilibrium constant (report your answer to three significant figures) for the following reaction if an equilibrium mixture contains 0.010 mol of solid PbBr2, and is 0.0100 M in Pb2+ ions and 0.0250 M in Br1- ions. Use the notation 4.31e-5 to indicate a number such as 4.31 x 10-5.
Answer:
6.25e-6 is the value of the equilibrium constant
Explanation:
we have this equation
[tex]PbBr(s) ----- Pb^{2+}(aq) + 2Br(aq)[/tex]
When at a state of equilibrium,
we have the concentration of Pb^2+ to be 0.01
we have the concentration of Br^- to be 0.025
the equilibrium constant concentration of both pure solids and liquid s are said to be equal to 1
[PbBR2] = 1
such tht
Keq = [Pb^2+] x [Br-]^2
we already know the values of these from the above.
0.01x0.025^2
= 0.01 x 0.000625
= 0.00000625
= 6.25 x 10^-6
= 6.25e^-6
Which of the following are decomposers?
O A. mice
O B. snakes
O C. fungi
OD. spiders
ASAP
4. This is low wet land.
A. swamp
B. island
C. desert
D. peninsula
5. Japan is one of these.
A. island
B. peninsula
C. swamp
D. desert
Answer:
swap
Explanation: because it is a low wet land
Answer:
4. swamp
5. Island
Plz mark brainliest:)
What is magma?
solid rock with a fine texture
cooled rock with large crystals
molten rock below Earth’s surface
flowing rock above Earth’s surface
Answer:
C. molten rock below Earth’s surface
Explanation:
a change of matter is a physical change
True or False
Answer:
true
Explanation:
hope it helps
Answer:
I'm pretty sure it's true
Explanation:
20 characters
PLEASE HELP, WILL MARK BRAINLIEST!
The best way to find the volume of an empty bottle is to...
a) weigh the bottle and record the mass, then add the water and subtract its mass from that of the empty bottle
b) fill the bottle with water and place it on a balance
c) fill the bottle with water, and then empty the water into a graduated cylinder.
Answer:
C
Explanation:
A chemical engineer must calculate the maximum safe operating temperature of a high-pressure gas reaction vessel. The vessel is a stainless-steel cylinder that measures 41.0cm wide and 49.2cm high. The maximum safe pressure inside the vessel has been measured to be 3.70MPa. For a certain reaction the vessel may contain up to 2.50kg of dinitrogen difluoride gas.
Required:
Calculate the maximum safe operating temperature the engineer should recommend for this reaction. Write your answer in degrees Celsius. Be sure your answer has the correct number of significant digits.
Answer:
[tex]T=2.78x10^3 \°C[/tex]
Explanation:
Hello,
In this case, considering that the safe temperature may be computed via the ideal gas law as we now the pressure, mass and volume via the dimensions:
[tex]V=\pi r^2 h=\pi *(41.0cm)^2*49.2cm=2.60x10^5cm^3*\frac{1L}{1000cm^3} =260L[/tex]
The pressure in atm is:
[tex]P=3.70MPa*\frac{1x10^6Pa}{1MPa} \frac{1atm}{101325Pa} =36.5atm[/tex]
And the moles considering the mass and molar mass (66 g/mol) of dinitrogen difluoride (N₂F₂):
[tex]n_{N_2F_2}=2.50kg*\frac{1000g}{1kg}*\frac{1mol}{66g} =37.9mol[/tex]
In sich a way, by applying the ideal gas equation, which is not the best assumption but could work as an approximation due to the high temperature, the temperature, with three significant figures, will be:
[tex]T=\frac{PV}{nR}=\frac{36.5Pa*260L}{37.9mol*0.082\frac{atm*L}{mol*K} }\\ \\T=3053.6K-273.15\\\\T=2.78x10^3 \°C[/tex]
Best regards.
using this chemical might discolour equipment and surfaces
Answer: do not know how to answer this
Explanation:
Which is the dependent variable in an experiment? 1.what I observe. 2. what I keep the same 3.What I change in the experiment. HELP NOW
Answer:
1.what I observe.
Explanation:
The dependent variable in an experiment is what is being observed in the experimental procedure.
This variable is the one that is closely tied to the effects originating from changing the independent variables.
Independent variables are the ones that cause the observation being studied. The effects produced and then studied are the dependent variables.What element in the second period has the largest atomic radius?
a
neon
b
lithium
c
carbon
d
potassium
Answer:
b) Lithium
Explanation:
calculate the equilibrium concentration for the nonionized bases and all ions in a solution that is 0.25M
Answer:
The equilibrium concentration of [CH₃NH₂] = 0.23965 M.
The equilibrium concentration of CH₃NH₃⁺ and OH⁻ = 0.01035 M respectively.
Explanation:
The first step is to write out the dissociation reaction. Therefore, the equation showing the dissociation is given as below;
CH₃NH₂ + H₂0 <--------------------------------------------------------> CH₃NH₃⁺ + OH⁻.
Kindly note that ''<----------->'' arrow shows that the reaction is an equilibrium reaction.
Therefore, at the start of the reaction [that is time, t =0], we have that the concentration of CH₃NH₂ = 0.25M, thus, the concentration of CH₃NH₃⁺ and OH⁻ is zero respectively at this time, t =0.
At equilibrium, the concentration of CH₃NH₂ = 0.25M - x, thus, the concentration of CH₃NH₃⁺ and OH⁻ is x respectively.
Therefore, kb = 4.47 × 10-4 = [CH₃NH₃⁺ ][OH⁻]/[CH₃NH₂]. Hence, slotting in the values into this equilibrium equation showing the relationship between kb and concentration of the species involved, we have that;
kb = 4.47 × 10⁻⁴ = x² /0.25 - x.
x² + 4.47 × 10⁻⁴x - 1.1175 × 10⁻⁴ = 0.
Solving this quadratic equation gives us the value of x as 0.01035 M.
Thus, the concentration of [CH₃NH₂] = 0.25 M - 0.01035 M = 0.23965 M
The equilibrium concentration of [CH₃NH₂] = 0.23965 M.
The equilibrium concentration of CH₃NH₃⁺ and OH⁻ = 0.01035 M respectively.
Which of the following molecules may show a pure rotational microwave absorption spectrum: (i) H2, (ii) HCl, (iii) CH4, (iv) CH3Cl, (v) CH2Cl2?
Answer:
Explanation:
H₂ , HCl , CH₃Cl , CH₂Cl₂ ---- Yes
CH₄ ------ No .
Symmetric molecules do not have rotational microwave absorption spectrum because they do not possess permanent dipole moment so they lack polarisability .
The pure rotational microwave absorption spectrum has been possessed by HCl and [tex]\rm \bold{CH_3Cl}[/tex].
Pure rotational microwave absorption has been consisted of the molecules having dipole and polarizability. The molecules that show the spectrum and dipole are diatomic molecules, linear molecules, spherical molecules.
(i) The hydrogen has been a diatomic molecule with symmetry thus not showing a pure rotational microwave absorption spectrum.
(ii) The HCl being a linear molecule possesses a pure rotational microwave absorption spectrum.
(iii) [tex]\rm CH_4[/tex] molecule has symmetry, thus will not possess a pure rotational microwave absorption spectrum.
(iv) [tex]\rm CH_3Cl[/tex] molecule has no symmetry, and thus possesses a pure rotational microwave absorption spectrum.
(v) [tex]\rm CH_2Cl_2[/tex] molecule with the presence of symmetry, thus lacks a pure rotational microwave absorption spectrum.
For more information about the pure rotational microwave absorption spectrum, refer to the link:
https://brainly.com/question/14215380
Calculate the density of the aluminum cylinder with a diameter 0f 1.3 cm weighing 18 grams. Height of the cylinder is 5.2 Cm. Find percent error (Actual density of Aluminum is 2.7 g/cm3). (Formula for volume of cylinder is πr2h)
Answer:
Percent error = 3.7%
Explanation:
Given data:
Density of Al cylinder = ?
Weight of cylinder = 18 g
Diameter = 1.3 cm
Height = 5.2 cm
Actual density of Al = 2.7 g/cm³
Percent error = ?
Solution:
First of all we will calculate the volume of cylinder through given formula.
V = πr²h
r = diameter /2
V = 22/7 × (0.65 cm)²× 5.2 cm
V = 22/7 × 0.4225cm²× 5.2 cm
V = 6.89 cm³
Now we will calculate the density.
d = m/v
d = 18 g/ 6.89 cm³
d = 2.6 g/cm³
Percent error:
Percent error = measured value - actual value /actual value × 100
Percent error = 2.6g/cm³ - 2.7g/cm³ /2.7g/cm³ × 100
Percent error = 3.7%
Negative sign shows that measured or experimental value is less than actual value.
True or False: Particles that are moving faster have a higher temperature
Answer:
true
Explanation:
I'm not sure why cause I dont know how to explain but it's TRUE
Answer:
True
Explanation:
The particles moving faster in a substance the hotter it gets.
Sketch the titration curve for the titration of a generic weak base B with a strong acid. The titration reaction is
B+H+⇌BH+
On the curve indicate the points that correspond to the following:
a) the equivalence point.
b) the region with maximum buffering) the point where pH = pKbd) the region where pH depends only on [B]e) the region where pH depends only on [BH+]f) the region where pH depends only on the amount of excess strong acid
Answer:
Kindly check the attached picture.
Explanation:
Titration is one of the useful concept or practical in chemistry which is used in the determination of the concentration of a particular chemical specie. Without mincing words, let us dive straight into the solution to the question;
(a) Determining the equivalence point using the graph.
=> The equivalence point is the point at which there has been been "enough" addition of the acid to the base to give us the congugate acid. In the diagram showing the curve, it is the point labelled (a).
(b)The next thing is to determine the region with maximum buffering.
=> The position with the maximum buffering ranges from the point labelled (b) in the graph and it is the point when the acid and the base has been added. But the point with the maximum buffering is labeled as point (c).
(c). Determination of the point where pH = pKb.
=> The Point in which the pH = pKb is the point a
(d). The region where pH depends only on [B].
=> The starting point in the point in which the pH is dependent on the concentration of the base, [B].
(e). The region where pH depends only on [BH+].
=> This is the same point with point labelled as (a). Thus, point (a) and (e) are the same.
(f). The region where pH depends only on the amount of excess strong acid is the point labelled as (f) which is known as the post equivalence point.
calculate the amount of water produced by the combustion of 16 gram of methane
Answer: Since, the given weight of methane is 16 g, hence the water produced by the combustion of 16 g of methane is 36 g.
Explanation: Have a blessed day!
How many grams of Cl are in 31.2g CF2Cl2
Answer:
Mass = 42.6 g
Explanation:
Given data:
Mass of CF₂Cl₂ = 31.2 g
Mass of Cl₂ = ?
Solution:
Number of moles of CF₂Cl₂ = mass/molar mass
Number of moles = 31.2 g/121 gmol
Number of moles = 0.3 mol
1 mole of CF₂Cl₂ contain 2 moles of Cl atom.
0.3 mol × 2 = 0.6 mol
Mass of Cl₂:
Mass = number of moles × molar mass
Mass = 0.6 mol × 71 g/mol
Mass = 42.6 g
Calculate the sublimation pressure of the solid at the melting point of 400.00 K assuming that the enthalpy of sublimation is not a function of temperature.
This question is incomplete, the complete question is;
Tonksite is a solid at 300.00K. At 300.00 K its enthalpy of sublimation is 66.00 kJ/mol. The sublimation pressure at 300.00 K is 5.00 × 10⁻⁴ atm
Calculate the sublimation pressure of the solid at the melting point of 400.00 K assuming that the enthalpy of sublimation is not a function of temperature.
Answer: the sublimation pressure of the solid at the melting point is 0.3727 atm
Explanation:
Given that;
T1 = 300 K
T2 = 400 K
H_sub = 66 kJ/mol = 66000 J/mol
P1 = 5.00 × 10⁻⁴ atm
p2 = ?
now using the expression
log( p2 / 5.00 × 10⁻⁴ ) = (H_sub / R × 2.303 ) (( T2 - T1) / T1T2)
now we substitute of given values into the expression
log(p2/p1) = (66000 / 8.314 × 2.303 ) (( 400 - 300) / 300 × 400 )
p2 = 0.3727 atm
therefore the sublimation pressure of the solid at the melting point is 0.3727 atm
I have an object with a density of 0.351g/mL and a volume of 51 mL. What is the mass of this object
Answer:
17.9
Explanation:
to find mass you multiply density and volume. so mass=(51)(0.351) which is 17.901
Answer each of the following questions with increases, decreases, or does not change.
a) If the intermolecular forces in a liquid increase, the normal boiling point of the liquid increases .
b) If the intermolecular forces in a liquid increase, the vapor pressure of the liquid does not change .
c) If the surface area of a liquid increases, the vapor pressure increases .
d) If the temperature of a liquid decreases, the equilibrium vapor pressure increases .
Drag and drop your selection from the following list to complete the answer:
does not change decreases increases
Answer:
1) Increases
2) decreases
3) increases
4) decreases
Explanation:
When the intermolecular forces in a liquid increases, the greater vapour pressure of the liquid decreases accordingly.
Since the vapour pressure is proportional to temperature, as temperature increases, the vapour pressure increases alongside.
As intermolecular forces increases, the boiling point increases accordingly since more energy is required to break intermolecular bonds.
Lastly, the greater the surface area, tell greater the vapour pressure since more liquid surface area is now available.
Choose all the right answers.
Choose the two places where continental glaciers can be seen.
Iceland
Norway
Antarctica
Greenland
Answer:
the real answer is Iceland, Norway, Antarctica.
Explanation:
It is not Green land proof Glaciers are not an unusual sight in Greenland due to the gigantic ice sheet that covers most of the country. However, there are only a few places where the glaciers occur immediately adjacent to a town, and therefore can be appreciated on an excursion.
proof for Antarctica These large-scale features of glacial erosion can be seen in Antarctica where rock protrudes above the surface of the ice sheet There are many glaciers in the Antarctic. ... The lists include outlet glaciers, valley glaciers, cirque glaciers, tidewater glaciers and ice streams. Ice streams are a type of glacier and many of them have "glacier" in their name, e.g. Pine Island Glacier
proof for Norway are the largest glaciers on mainland Norway. ... In total, Norway has around 1,600 glaciers - 900 of these are in North Norway, but 60% of the total glacier area is south of Trøndelag. 1% of mainland Norway is covered by glaciers.
proof for Iceland Glaciers in Iceland are among the best natural wonders in the world. In fact, the country's glaciers are so great that you can see them from space! With 11% of the total land area covered by ice caps, Iceland is a glacier paradise. Here are the five most amazing glaciers that you must see when visiting Iceland!
List the steps in the water cycle, in the correct order?
iron (III) oxide pentahydrate formula
Answer:
Molecular Formula Fe2O12S3·5H2O
IUPAC Name iron(3+);tri sulfate;pentahydrate
Explanation:
How many moles of precipitate will be formed when 100.0 mL of 0.200 M NaBr is reacted with excess Pb(NO₃)₂ in the following chemical reaction?
2 NaBr (aq) + Pb(NO₃)₂ (aq) → PbBr₂ (s) + 2 NaNO₃ (aq)
Answer : The number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.
Explanation : Given,
Concentration of NaBr = 0.200 M
Volume of solution = 100.0 mL = 0.1 L (1 L = 1000 mL)
First we have to calculate the moles of NaBr.
[tex]\text{Moles of NaBr}=\text{Concentration of NaBr}\times \text{Volume of solution in L}[/tex]
[tex]\text{Moles of NaBr}=0.200M\times 0.1L=0.02mol[/tex]
Now we have to calculate the moles of precipitate, [tex]PbBr_2[/tex] formed.
The balanced chemical reaction is:
[tex]2NaBr(aq)+Pb(NO_3)_2(aq)\rightarrow PbBr_2(s)+2NaNO_3(aq)[/tex]
From the balanced chemical reaction we conclude that:
As, 2 moles of NaBr react to give 1 mole of [tex]PbBr_2[/tex]
So, 0.02 moles of NaBr react to give [tex]\frac{0.02}{2}=0.01[/tex] mole of [tex]PbBr_2[/tex]
Therefore, the number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.
The number of mole of the precipitate (i.e PbBr₂) formed when 100 mL of 0.2 M NaBr react with excess Pb(NO₃)₂ is 0.01 mole
We'll begin by calculating the number of mole of NaBr in 100 mL of 0.2 M NaBr solution. This can be obtained as follow:Volume = 100 mL = 100 / 1000 = 0.1 L
Molarity of NaBr = 0.2 M
Mole of NaBr =?Mole = Molarity x Volume
Mole of NaBr = 0.2 × 0.1
Mole of NaBr = 0.02 mole Finally, we shall determine the number of mole of the precipitate (i.e PbBr₂) produced from the reaction. This can be obtained as follow:2NaBr(aq) + Pb(NO₃)₂(aq) → PbBr₂(s) + 2NaNO₃ (aq)
From the balanced equation above,
2 moles of NaBr reacted to produce 1 mole of PbBr₂.
Therefore,
0.02 mole of NaBr will react to produce = [tex]\frac{0.02}{2} \\\\[/tex] = 0.01 mole of PbBr₂.
Thus, the number of mole of the precipitate (i.e PbBr₂) produced from the reaction is 0.01 mole
Learn more: https://brainly.com/question/19572703
The energy associated with the motion and position of an object is called a.kinetic energy
b.potential energy
c.gravitational potential energy d.mechanical energy
Answer: The answer is D.
Explanation:
The form of energy associated with the motion, position, or shape of an object is called mechanical energy. An object's mechanical energy is a combination of its potential energy and its kinetic energy. The basketball has both potential energy and kinetic energy.
Hope this helps!