Drag and drop each feature into the correct category.​

In terms of systematic technical learning related to design, I can say that it is expected that both students and professionals will gain specific technical knowledge and skills related to design.

Hence, systematization is the means by which new knowledge is created, lessons are identified, existing experiences are illuminated, and new experiences are illuminated. This process would not be valid if it were not the outcome of a collective action and from a multi-actor perspective.

In essence, systematization seeks to uncover this knowledge and then process it collectively to extract all relevant lessons and contributions. In this sense, systematization is understood to be a key organizational learning methodology.

To know more about technical visit:-

https://brainly.com/question/22798700

#SPJ1

Katrina, as an experienced Power BI service user, would prefer to work on Power BI desktop when data sources aren't cloud-based, creating complex calculations, creating data models and creating reports.

Learn more about service  here: https://brainly.com/question/24553900

#SPJ11

To allocate a new PDS (Partitioned Data Set) with the given information using TSO command, follow the syntax:

ALLOCATE DS('IBM.BUILDS') NEW

SPACE(5,5) TRACKS

LRECL(80) RECFM(FB) BLKSIZE(100) DSORG(PO) DIR(2) CISIZE(300)

Here, 'IBM' is the user id and 'BUILDS' is the data set name. The SPACE parameter specifies the amount of space required for the new dataset, where 5 tracks are allocated for both primary and secondary space. LRECL specifies the logical record length, RECFM specifies the record format as fixed blocked (FB), and BLKSIZE specifies the block size of 100 bytes. DSORG(PO) specifies the partitioned organization of the data set, DIR(2) specifies that two directory blocks are allocated, and CISIZE(300) specifies the data control block size.

By using this command, a new PDS will be allocated with the given specifications.

Find out more about PDS (Partitioned Data Set)

brainly.com/question/30924255

#SPJ4

Platforms can benefit this organization in several ways to protect its sensitive data from cyber-attacks: Security features, Centralized control, Automated monitoring and Continuous updates.

Platforms can benefit this organization by providing access control solutions and data security solutions. Access control solutions ensure that only authorized personnel have access to the sensitive data, while data security solutions such as encryption, backup, and disaster recovery help protect the data from cyber-attacks.

Additionally, platforms can offer analytics that can help detect potential threats and provide alerts for potential attacks.

By implementing policies and controls on a platform designed specifically for cybersecurity, the organization can better manage its security risks and minimize the impact of any potential cyber-attacks.

For such more question on cyber-attacks:

https://brainly.com/question/7065536

#SPJ11

Answer:

Radio button: A radio button is a graphical user interface (GUI) element that allows the user to select only one option from a predefined set of mutually exclusive options. When one radio button is selected, any other previously selected radio button in the same group is deselected.

Button: A button is a GUI element that allows the user to trigger an action by clicking on it. Buttons are often labeled with text or an icon that describes the action they perform, such as "Save" or "Cancel".

Check button: A check button is a GUI element that allows the user to toggle a setting on or off. When the check button is selected, the setting is turned on; when it is deselected, the setting is turned off.

Label: A label is a GUI element that displays text or an image to provide information to the user. Labels are often used to identify other GUI elements or to provide context for user input.

Textbox: A textbox is a GUI element that allows the user to enter text or numeric data. Textboxes can be single-line or multi-line, and they can have various formatting options such as password masking or numeric input validation.

It is a rough draft of a program. In software development, a prototype is a rudimentary working model of a product or information system, usually built for demonstration purposes or as part of the development process.

A prototype is a piece of software you create to test software concepts. You might use it for your personal purposes or to present stakeholders with proof of concept ideas. A prototype is typically created rapidly and with shortcuts that are not typically used in production code. There are two schools of thinking regarding how to transform a working prototype into a product that is ready for production. According to the first camp, production solutions should be totally rewritten and prototypes should be completely thrown out. I myself fall into the second camp and think that sometimes it makes more sense to refactor a prototype in order to make it production ready. It actually depends on how well the prototype was originally developed and how well the prototype meets.

learn more about prototype here:

https://brainly.com/question/28187820

#SPJ1

The A: overloaded assignment (=) operator  is a member function that is automatically defined for you, but one that you should define explicitly anyway if you are required to explicitly define the copy constructor to avoid a shallow copy.

When we define the copy constructor to avoid a shallow copy, we also need to define the overloaded assignment (=) operator explicitly. This is because the default assignment operator performs a shallow copy, which can lead to problems if the class contains pointers or dynamically allocated memory. By defining the assignment operator explicitly, we can ensure that a deep copy is performed and that the class behaves correctly.

Therefore, the correct answer is option A. the overloaded assignment (=) operator.

You can learn more about member function at

https://brainly.com/question/30032547

#SPJ11

The reason why the code segment does not work as intended is because it is missing a for loop to traverse the rows of the two-dimensional array.

The code segment only has one for loop that traverses the columns of the array. Additionally, there is a syntax error in the declaration of the two-dimensional array. The correct declaration should be: int[][] arr = {{47, 3, 5, 4}, {19, 2, 7, 5}, {1, 4, 3, 8}};To fix the code segment, we need to add another for loop to traverse the rows of the array and fix the syntax error in the declaration of the array.

Here is the corrected code segment: int[][] arr = {{47, 3, 5, 4}, {19, 2, 7, 5}, {1, 4, 3, 8}}; for (int i = 0; i < arr.length; i++) { for (int j = 0; j < arr[i].length; j++) { if (arr[i][j] == num) { System.out.println(arr[i][j]); } } }

This code segment will now correctly traverse the two-dimensional array and print the value if it is equal to num.

Learn more about dimensional array:

https://brainly.com/question/14530506

#SPJ11

Dot-matrix printer uses a printhead consisting of pins that strike an inked ribbon to transfer the ink to the paper. The correct answer is option d.

A dot matrix printer is a form of computer printing that uses a printhead consisting of pins that strike an inked ribbon to transfer the ink to the paper. Dot-matrix printers have a series of metal or plastic pins that strike an inked ribbon to make marks on paper. While this kind of printer is mostly used to produce invoices and other multipart business forms, it can also print on standard single-sheet paper.

Thermal printers are a type of printer that use heat to produce an image. These printers use coated thermal paper and heat to produce images on paper. They are commonly used in cash registers and credit card machines. When the paper passes through the printer, the printer head produces heat. The heat causes the paper to darken in the areas where the image or text has been printed.

Learn more about dot matrix printer here: https://brainly.com/question/27962260

#SPJ11

The network is most likely experiencing a DHCP starvation attack.

A DHCP starvation attack is a network security attack that involves overwhelming a DHCP server with an excessive number of DHCP requests in a short amount of time. This causes the server to run out of available IP addresses and therefore unable to issue an IP address to the legitimate user who actually needs one.

The attack is carried out using a tool that repeatedly sends out DHCP requests, usually with fake MAC addresses. As a result, the server is flooded with invalid DHCP requests, causing the server to stop responding to requests from legitimate clients. This is also known as a DHCP exhaustion attack as it exhausts the DHCP pool.

When an attacker launches a DHCP starvation attack, the victim's DHCP server runs out of available IP addresses. This causes DHCP clients to fail to obtain IP address lease requests from the DHCP server as they should. Because the DHCP server is unable to respond to these requests, the attacker's DHCP client can take the valid IP addresses leaving the other devices without IP configurations. In summary, a DHCP starvation attack targets the DHCP server, not the end devices, and uses up all available IP addresses, making it impossible for the legitimate user to connect.

The questions seems incomplete. The choices must have been:

Rogue DHCP server

DHCP starvation attack

Duplicate MAC Addresses

Incorrect subnet mask

Learn more about DHCP starvation attack here: https://brainly.com/question/31013008

#SPJ11

One of the following solutions can help you meet your requirements for retaining monthly database backups for the duration of your three-year contract with a healthcare provider:

1. Create a manual backup of the RDS database and store it in Amazon Simple Storage Service (S3). This will allow you to retain the backup for as long as you need.

2. Use AWS Database Migration Service (DMS) to create a snapshot of the RDS database and store it in Amazon S3. This will also allow you to retain the backup for as long as you need.

3. Create a read replica of the RDS database and store it in a different AWS region. This will allow you to retain the backup for as long as you need, and also provide redundancy in case of a failure in the primary region.

4. Use AWS Lambda to create a function that automatically creates a manual backup of the RDS database and stores it in Amazon S3.

This will allow you to retain the backup for as long as you need, and also automate the backup process.

Learn more about business contract:

https://brainly.com/question/27899951

#SPJ11

A float variable can hold the following two values: 3.4 and 1. (as 1 can be implicitly converted to the float value 1.0).

Decimal positive and negative values with a decimal point, such as 35.3, -2.34, or 3597.34987, are stored using the float data types.

A variable of the floating point type can store a real number, such as 43210, -3.33, or 0.01226. Because the decimal point can "float," or support a variable number of digits before and after it, the floating component of the name floating point refers to this property.

To know more about variable visit:-

https://brainly.com/question/13381977

#SPJ1

To examine the distribution of the variables, you can use histograms to display the data. This will give you an idea of what the distribution looks like, as well as if there are any unusual data values. It's also possible to check for any missing values that should be replaced. You can do this by looking at the summary statistics for each variable or by checking if there are any outliers in the dataset.

To assign the variable storeid the model role id and the variable salestot the model role rejected, you can use the Visual Studio Model Designer. You should ensure that the remaining variables have the input model role and the interval measurement level. The variable salestot should be rejected because it is not related to the target variable, and therefore it can't be used to accurately predict the outcome.

To add an input data source node and select the dungaree data table as the data source, simply drag the data source node from the Toolbox to the diagram workspace. Then, select the data table from the available list of data sources. Finally, add a cluster node to the diagram workspace and connect it to the input data node.

You can learn more about distribution of variables at

https://brainly.com/question/30329306

#SPJ11

I can provide you with a general checklist to review your Python project file before uploading it to your instructor .

Wite the Python program and checklist for reviewing purpose?

1. Check if the program has the following sequence of code:

print("How many snakes are there? (Type an integer.)")

snakes = int(input())

if snakes > 1:

   print("You see", snakes, "snakes! Run!")

elif snakes == 1:

   print("You see 1 snake. That's not so bad.")

else:

   print("You don't see any snakes. What a relief!")

2. Check if the code has no syntax errors or logical errors.

3. Verify that the program executes without errors and produces the expected output for various inputs.

4. Ensure that you have saved the file with the correct filename and in the correct directory.

5. Verify that there is no unnecessary code or comments in the file.

6. Ensure that the code is formatted correctly for readability.

7. Verify that the program meets the assignment's requirements.

Once you have reviewed the above points and made any necessary changes, you can consider the project file complete.

To learn more about Python project, visit: https://brainly.com/question/29814529

#SPJ1

The term for a flowchart that is used to separate value-added from non-value-added steps in a process is a Value Stream Map (VSM).

Value Stream Map (VSM) is a flowchart that depicts the entire process from the raw material acquisition to the delivery of the finished product. A VSM is used to separate value-added from non-value-added steps in a process. VSM provides a visual representation of the current process, and it serves as a useful tool for identifying wastes that could be eliminated from the process.

A Value Stream Map (VSM) is a type of flowchart that graphically depicts the entire process from the raw material acquisition to the delivery of the finished product. A VSM is used to separate value-added from non-value-added steps in a process. VSM provides a visual representation of the current process, and it serves as a useful tool for identifying wastes that could be eliminated from the process.

Learn more about Value Stream Map (VSM) here: https://brainly.com/question/29768761

#SPJ11

The option that is not a good way to define AI is: "ai is all about machines replacing human intelligence." The correct option is C.

Learn more about AI here: https://brainly.com/question/28390902

#SPJ11

The disadvantage of proprietary software is that it B. does not allow the modifications to features needed to counteract a competitor's initiative.

It is software that is exclusively controlled by the manufacturer and is not distributed to the general public, unlike open-source software.One of the main drawbacks of proprietary software is that it does not allow modifications to the required features to counteract the initiatives of competitors. In other words, the company that owns the software has complete control over how the software works and cannot modify it to meet the changing needs of the users or to keep up with technological advancements. Because the software is restricted, users are unable to see how it works, and this can be a significant disadvantage when it comes to resolving issues and adding new features.

Learn more about software: https://brainly.com/question/28224061

#SPJ11

The type of relationship that exists between the related entities of book and book copy is one-to-many relationship.

Learn more about  entities here: https://brainly.com/question/27250492

#SPJ11

To implement the desired configuration for archiving no more than two application revisions to conserve disk space, you can use the AWS CodeDeploy application specification file (AppSpec file). The AppSpec file is a YAML-formatted or JSON-formatted file that is used to manage how AWS CodeDeploy deploys an application's content and configures its Amazon EC2 instances.

In the AppSpec file, you can specify the `max_count` property for the `files` section to limit the number of revisions that are archived. For example, you can set `max_count` to 2 to archive no more than two application revisions:

```
files:
 - source: /path/to/source
   destination: /path/to/destination
   max_count: 2
```

This will ensure that only the two most recent revisions are archived on the EC2 instances associated with the `prodbuilders` tag group, and any older revisions are automatically deleted to conserve disk space.

Learn more about the AWS CodeDeploy:

https://brainly.com/question/30565358

#SPJ11

Note that in the above scenario, there will be an envelope next to all readings that were sent to the electronic record.

After all items are entered correctly and sent to the record in the HWS Welch Allyn Spot Monitor Training, the user can use the "Search" function as a second form of confirmation that the record was successfully sent and stored in the database.

HWS Welch Allyn Spot Monitor is a medical device used for measuring vital signs, such as blood pressure, temperature, and pulse rate. It is designed for use in clinical settings, including hospitals and clinics.

The device is equipped with a touchscreen interface and wireless capabilities for easy transfer of patient data to electronic medical records. It is manufactured by Welch Allyn, Inc.

Learn more about Electronic record:
https://brainly.com/question/18258345
#SPJ1

Full Question:

HWS Welch Allyn Spot Monitor Training

After all items are entered correctly and sent to the record, what can the user use as a second form of confirmation they were sent?

Here's a QBASIC program to generate the series 2, 4, 6, 8, ..., up to the 10th term:

FOR i = 1 TO 10

   PRINT i * 2;

NEXT i

In this program, the FOR loop iterates from 1 to 10, and for each iteration, it multiplies the loop variable i by 2 and prints the result using the PRINT statement.


The semicolon ; after the PRINT statement prevents the cursor from moving to the next line after printing each number, so the output appears on the same line.

Learn more about Q-Basic:
https://brainly.com/question/24124254
#SPJ1

To deploy the workspace while developing a data science workspace that uses an Azure Machine Learning service, you should use a managed compute cluster.

Using a managed compute cluster is the best option since it reduces the time and effort required to set up and maintain a cluster. You won't have to worry about scaling the cluster up or down to meet demand, as Azure will automatically handle that for you. Furthermore, you won't have to worry about VM configuration, patching, or maintenance, which may be time-consuming. A managed compute cluster is recommended over a virtual machine because a virtual machine provides only a single instance for running experiments. Experiments are executed in parallel when you use a managed compute cluster. Because each experiment is run on a separate node, Azure Machine Learning can run many experiments in parallel. It can assist you in making the most of your time and money. Azure Machine Learning provides the ability to train models at scale, allowing you to deploy your workspace with confidence.

Learn more about virtual machine here https://brainly.com/question/30257120

#SPJ11

Answer:

Slicing

Explanation:

The mechanism in agile is known as slicing The term slicing refers to the process used by an Agile team to create and assign compact work units. Larger amounts of work are divided into smaller, and easier-to-manage units known as tasks through this efficient process of slicing.

Answer:

Software is used to control a computer. System software, utility software, and application software are some types of software that can run on a computer.

_______________________

Hope this helps! :)

Answer:

The software are programs that operate a computer. The software is the internal part of a computer and requires programming or coding skills to build them.

For example:

The Microsoft Windows and Linux and Unix and Macintosh are operating systems. The Operating systems allow computers to perform basic tasks.

>> The capabilities of the operating systems also depend on the RAM that provides them with speed and accuracy.

>> The Software is the brain of the computer or electronic device and the hardware is the body that can exist without the brain but will not work.

Explanation:

The Application Software are :-

The Features of System Software are :

A script's main function is to give performers guidance on how to represent particular characters in the best possible light. An actor may be better able to prepare for the part and give a more compelling performance.

It is the job of a film editor to put a vision together using the director's interpretation of the script. They will meet with the director and frequently travel to the setting to experience the story from the director's perspective as it is captured on camera.

For the purposes of this introduction, we'll refer to them as character, want and need, story, structure, conflict, and resolution.

To know more about function visit:-

https://brainly.com/question/28939774

#SPJ1

The number of people on the reservation, the number of nights they will be staying, and the age of the oldest visitor. To ensure that the inputs are valid, we will use loops to prompt the user to enter numeric data if they input an invalid value.

Based on the number of people on the reservation, we will assign the appropriate type of room. Groups of 1-2 people will be assigned a room with a king and sofa bed, while groups of 3-4 people will be assigned a room with two queens. Groups of 5 or more people are not able to stay at the hotel.If the oldest visitor is over 65 years old, they will receive a 10% discount on the total cost of their reservation. To calculate the discount, we will use a separate function.Finally, we will calculate the total cost of the reservation based on the number of nights, type of room, and any applicable discounts. We will use another function to perform this calculation.The program will use both the switch and if keywords to assign the type of room based on the number of people on the reservation. If the input is not valid, the program will output a message to the user and prompt them to enter the correct value(s). this program will provide a simple and user-friendly way to calculate the cost of a hotel reservation while ensuring that the inputs are valid and that the appropriate type of room is assigned based on the number of people on the reservation.

To learn more about loops click the link below:

brainly.com/question/14390367

#SPJ4

Here's an example program in QBASIC that calculates the perimeter of a circle using the formula P = 2πr:

REM QBASIC program to calculate the perimeter of a circle

INPUT "Enter the radius of the circle: ", r

p = 2 * 3.14159 * r

PRINT "The perimeter of the circle is "; p

END

This program prompts the user to enter the radius of the circle, then calculates the perimeter using the formula P = 2πr. The result is displayed using the PRINT statement.

Note that the value of π is approximated as 3.14159 in this example. You could increase the precision by using a more accurate value of π or by using QBASIC's built-in constant for π, which is named PI.

Answer:

A QBASIC program to calculate the perimeter of a circle

DECLARE SUB CIRCUM (R)

CLS

INPUT “ENTER RADIUS"; R

CALL CIRCUM (R)

END

SUB CIRCUM (R)

C=2*3.14 * R

PRINT "CIRCUMFERENCE OF CIRCLE "; C

END SUB