Dylan has $20.00 on his gift card. After some purchases, he has $0.06 remaining on his gift card. Dylan has _____% of the original amount remaining on the gift card.

The expression 3x³y² - 9xz⁴ + 8y²z have no GCF greatest common factor but the terms 3x³y² and 8y²z have GCF equal to y².

The GCF defines the highest common factor present in between given two or more numbers or algebraic expressions.

we shall determine the GCF greatest common factor for the algebraic expression 3x³y² and 8y²z as follows:

3x³y² = y² × 3x³

8y²z = y² × 8z

both terms 3x³y² and 8y²z have y² common to them, so we can write;

3x³y² + 8y²z = y² × 3x³ + y² × 8z

3x³y² + 8y²z = y²(3x³ + 8z)

In conclusion, the expression 3x³y² - 9xz⁴ + 8y²z have no GCF greatest common factor but the terms 3x³y² and 8y²z have GCF equal to y².

Know more about GCF here:https://brainly.com/question/21504246

#SPJ1

The total number of units produced in an 8-hour day is approximately 22.86 units.

There are different ways to approach this problem, but one possible method is to use the concept of cycle time and the total available production time to determine the number of units produced in a day.

An operation is performed on a batch of 100 units.

Setup time is 20 minutes and run time is 1 minute.

The total number of units produced in an 8-hour day is:

Step 1: Find the cycle time per unitThe cycle time per unit is the sum of the setup time and the run time:

Cycle time = setup time + run time = 20 minutes + 1 minute = 21 minutes.

Step 2: Find the total available production time in a day

One day has 24 hours, but 8 hours are not available for production due to breaks, maintenance, and other factors. Therefore, the total available production time is:

Total available production time = 8 hours × (60 minutes per hour) = 480 minutes.

Step 3: Calculate the number of units produced in a day

The number of units produced in a day is the total available production time divided by the cycle time per unit:

Units produced = total available production time ÷ cycle time= 480 minutes ÷ 21 minutes≈ 22.86 units (rounded to two decimal places)

Therefore, the total number of units produced in an 8-hour day is approximately 22.86 units.

This assumes that there is no variability in the process, and that all units are of good quality.

If there are any defects, rework, or other disruptions, the actual production may be lower.

For similar question on approximately.

https://brainly.com/question/114935

#SPJ11

Thus, 4.0 moles of NH3 would be produced when 6.0 moles of H2 react with sufficient N2.

Suppose 6.0 mol of H2 reacts with sufficient N2 to produce ammonia, NH3. We can determine the number of moles of NH3 produced using stoichiometry.The balanced chemical equation for the reaction is:[tex]3H2(g) + N2(g) → 2NH3(g)[/tex]

From the equation, we can see that 3 moles of H2 react with 1 mole of N2 to produce 2 moles of NH3.

Therefore, using the mole ratio from the balanced equation, we can calculate the number of moles of NH3 that would be produced when 6.0 mol of H2 reacts with [tex]N2:6.0 mol H2 × (2 mol NH3/3 mol H2) = 4.0 mol NH3[/tex]

for such more questions stoichiometry

https://brainly.com/question/9413308

#SPJ11

Mark needs to invest 5572.24 hours (rounded to one decimal place) of study time in order to achieve an A letter grade in this course.

To determine the estimated minimum number of hours Mark should study, we need to solve for the number of hours such that his predicted score, given by the regression equation from part (b), is at least 90.

The regression equation is as follows: Predicted score = 48.74 + 0.00726(number of hours studied)

Setting the predicted score equal to 90 and solving for the number of hours studied gives:90 = 48.74 + 0.00726 (number of hours studied)

Solving for the number of hours studied gives: number of hours studied = (90 - 48.74)/0.00726= 5572.24

Therefore, Mark should study for 5572.24 hours (rounded to one decimal place) to receive a letter grade of A for this course.

To know more about regression equation refer here:

https://brainly.com/question/30738733#

#SPJ11

The lower quartile of the given set of numbers 4, 6, 7, 8, 10, 12, 20 is 6. So, correct option is B.

To find the lower quartile of a set of numbers, we first need to arrange them in ascending order. The given numbers are: 4, 6, 7, 8, 10, 12, 20.

Next, we divide the data set into four equal parts. The lower quartile is the median of the lower half of the data set. In this case, the lower half is 4, 6, and 7.

To determine the median of the lower half, we need to find the middle value. Since we have an odd number of data points in the lower half, the middle value is the single value between the two extremes. In this case, the median is 6.

This corresponds to option (b) in the given choices: 6.

To learn more about quartile click on,

https://brainly.com/question/15148820

#SPJ2

The two numbers that multiply to give 24 and add to give -11 are -3 and -8.

To find these numbers, you can use a system of equations. Let x and y be the two numbers. Then we have:

We can use the second equation to solve for one of the variables in terms of the other. For example, we can solve for x:

x + y = -11

x = -11 - y

We can then substitute this expression for x into the first equation:

xy = 24

(-11 - y)y = 24

Expanding and rearranging, we get:

y^2 + 11y + 24 = 0

This is a quadratic equation that we can solve using factoring or the quadratic formula. Factoring, we get:

(y + 3)(y + 8) = 0

So either y + 3 = 0 or y + 8 = 0. This means that y can be -3 or -8. Substituting each of these values into x = -11 - y, we get:

If y is -3, then x is -11 - (-3) = -8

If y is -8, then x is -11 - (-8) = -3.

Translated question "Numbers that multiply to give me 24 and add to give me -11"

Read more about Numbers

brainly.com/question/25734188

#SPJ1

Luis wants to create a graph using PowerPoint to show how much weight he lost after starting an exercise plan over six months. The type of graph that Luis should use is a line graph.

What is a line graph?A line graph is a method of displaying data or information on a two-dimensional Cartesian plane. It is mostly used to display changes over time or trends. It is ideal for data that has a lot of numeric data or that change frequently over time.The line graph is made up of two lines, one horizontal and the other vertical, which connect the data points in a sequential order. It is best used for visual representation of data, as it provides the viewer with a simple, visual representation of the data.

The x-axis and y-axis of a line graph represent the independent and dependent variables, respectively. The x-axis is often used to represent the time or the data being analyzed, while the y-axis represents the numerical values that are being analyzed.To create a line graph using PowerPoint, you can use the Insert Chart button to add your data, then choose Line Graph as the type of chart you want to create. You can then customize the chart as you like, including changing the colors, fonts, and background.

Learn more about  line graph:https://brainly.com/question/9699786

#SPJ11

Since the sequence is always decreasing and cannot go below the lower bound, it becomes increasingly closer to the lower bound, and thus converges to a limit.

A sequence is said to be decreasing if each term is smaller than the previous one, and bounded below if there exists a lower bound such that no term in the sequence is smaller than this bound. In this case, the sequence is decreasing and bounded below by 0.

When a sequence is both decreasing and bounded below, it must have a limit because the terms cannot continue to decrease indefinitely, as they cannot go below the lower bound (in this case, 0). This means that as we progress through the terms of the sequence, the difference between consecutive terms will decrease and eventually approach a constant value.

The limit of a sequence is a value that the terms of the sequence approach as they get closer and closer to the end. In this situation, the limit is the smallest possible value that the sequence can approach, without going below the lower bound.

for such more questions on sequence

https://brainly.com/question/7882626

#SPJ11

There are 4896 ways of arranging 7 pets in a row of 7 chairs such that at least 2 cats are next to each other.

Arrangement of entities can be done using permutation and combination in mathematics.

Consider the distributions where 2 cats are not next to each other as

C D C D C D C.

There are 4! ways to seat the cats, and 3! ways to seat the dogs that gets us N=4! 3! = 144

There are a total of 7!=5040 possible ways to seat both cats and dogs.

At least 2 cats seat together= All possible arrangements- None of the cat seat together.

Thus the number of seatings where at least 2 cats are adjacent is

5040-144 = 4896

So, there are 4896 arrangements can be made so that at least 2 of the cats seat together.

Learn more about permutation and combination, here:

https://brainly.com/question/28720645

#SPJ12

A large bag contains marbles of different colors. there are 10 red marbles, 5 blue marbles and 7 yellow marbles. when selecting 3 marbles without replacement, the probability of selecting 3 red marbles is 1/54.

The probability of selecting 3 red marbles is 1/54.What is a probability?

Probability refers to the likelihood or chance of an occurrence. The probability of an event occurring is the ratio of the number of favourable outcomes to the total number of possible outcomes.

A fraction or a decimal is used to express it.The total number of marbles in the bag is 10 + 5 + 7 = 22 marbles.

There are ten red marbles in the large bag, so the number of ways to select 3 red marbles from ten red marbles is:

[tex]10C_3 = (10 \times 9 \times 8) / (3 \times 2 \times 1) = 120[/tex]

There are 22 marbles in the bag, therefore, the total number of ways to pick 3 marbles from 22 is:

[tex]22C_3 = (22 \times 21 \times 20) / (3 \times 2 \times 1) = 1540[/tex]

Hence, the probability of choosing 3 red marbles out of the 22 marbles in the bag without replacement is:120/1540 = 1/54

for such more question on probability

https://brainly.com/question/24756209

#SPJ11

Answer: Shape one: 5, Shape 2: 13

Step-by-step explanation:

shape one
12^2+x^2=13^2

shape two
5^2+12^2=x^2

Answer:

PLEASE MARK ME AS BRAINLLIEST

Step-by-step explanation:

p=12

h=13

b=?

p²+b²=h²

12²+b²=13²

144+b²=169

b²=169-144

   = 25

b=root25

b=5m

b=5

p=12

h=?

p²+b²=h²

12²+5²=h²

144+25=h²

h²=169

h=root169

h=13

In this particular question, the following statements can be used to complete each sentence with either "increases" or "decreases":

- Phytic acid decreases the absorption of zinc from grains.

Oxalic acid decreases the absorption of calcium from spinach.

- Refinement of grains decreases the mineral content of grain products.-

Vitamin C increases the absorption of iron from foods.-

Vitamin D increases the absorption of calcium from foods.

Explanation:

Bioavailability refers to the proportion of a nutrient that is absorbed from food and made available for use in the body. Factors that alter bioavailability of minerals from foods include phytic acid, oxalic acid, refinement of grains, and vitamins C and D. Phytic acid, for instance, decreases the absorption of zinc from grains while oxalic acid decreases the absorption of calcium from spinach.

           Refinement of grains, on the other hand, decreases the mineral content of grain products. Conversely, vitamin C increases the absorption of iron from foods while vitamin D increases the absorption of calcium from foods.

To know more about Bioavailability:

https://brainly.com/question/4352095

#SPJ11

The equation of the line is 9x+8y + 19 = 0 and 5x - 4y+ 19 = 0 According to the given graphs, these are the equations of the graph.

Consider two points on the blue line.

The points are (5, -8) and ( -3,1 ).

Equation of the blue line is:

y - 1 = [tex]\frac{-8-1}{5+3} (x+3)[/tex]

8 (y - 1) = -9 ( x + 3)

8y - 8 = -9x -27

9x + 8y + 19 = 0

Therefore, the Equation of the blue line is 9x + 8y + 19 = 0.

Consider two points on the red line.

The points are (-3, 1) and ( 1,6 ).

Equation of the red line is:

y - 1 = [tex]\frac{6-1}{1+3} (x+3)[/tex]

4 (y - 1) = 5 (x + 3)

4y - 4 = 5x + 15

5x - 4y+ 19 = 0

Therefore, the Equation of the red line is 5x - 4y+ 19 = 0.

Hence, the equations for the given blue and red lines are completed.

Learn more about Graphs:

https://brainly.com/question/11507954

#SPJ1

1: The measure of arc JML is: arc JML = 176°

3: m∠WXY = 59°

5: The measure of the arc is: arc FE = 54°

7: The measure of the angles are: m∠A  = 79° and m∠B  = 112°

9: The value of x is: x = 9

No. 1

The measure of inscribed angle is half the measure of its intercepted arc. That is:

∠ JKL = 1/2 * arc JML

88 = 1/2 * arc JML

arc JML = 2 * 88

arc JML = 176°

No. 3

arc WY =  360 - 86 - 156 = 118° (sum of angles in a circle)

m∠WXY = 1/2 * arc WY

m∠WXY = 1/2 * 118

m∠WXY = 59°

No. 5

An angle inscribed in a semicircle is a right angle. Thus, m∠DFE = 90°

m∠EDF = 180 - 90 - 63 = 27° (sum of angles in a triangle)

m∠EDF  = 1/2 * arc FE

27°  = 1/2 * arc FE

arc FE = 2 * 27

arc FE = 54°

No. 7

The opposite angle in a cyclic quadrilateral add up to 180°. That is:

m∠A + m∠C  = 180°

m∠A + 101 = 180

m∠A  = 180 - 101

m∠A  = 79°

m∠B + m∠D  = 180°

m∠B + 68 = 180

m∠B  = 180 - 68

m∠B  = 112°

No. 9

67 = 1/2 * (16x - 10)

67 * 2 = (16x - 10)

16x - 10 = 134

16x  = 134 + 10

16x = 144

x = 144/16

x = 9

Learn more about inscribed angles on:

brainly.com/question/30289513

#SPJ1

The analysis of the data to obtain the best fit line equations that model the data, indicates;

5. a. Quadratic

b. y = -0.1179·x² + 2.1124·x + 4.215

c. Please find the completed chart showing the predicted values and the  in the residuals in the following section.

6. a. A linear model may not be appropriate for the data in the residual plot

b. 4

c. 5

4. a. The exponential model of the function is; y = 100·e^(-0.124·t)

b. The weight after 8 weeks is about 37.1 grams

c. The sample will be 4 grams in about 26 weeks

5. a. The equation is; y = 22.703·x + 2.5733

b. The predicted y-value at x = 10 is; y = 229.60

c. The first time is about x ≈ 3.54

The best fit line is a line that is drawn through a set of data points in such a way that it minimizes the sum of squared errors of the data.

5. The best fit model can be obtained by plotting a scatter plot of the graph, which indicates that the best fit line resembles the shape of a parabola.

Therefore;

a. The best fit equation is; Quadratic

b. The best fit equation, obtained using technology is; y = -0.1179·x² + 2.1124·x + 4.215

The square of the correlation coefficient is; R² = 0.9584

The chart can be filled with the best fit equation as follows;

[tex]\begin{tabular}{ | c | c | c | c | c | }\cline{1-4}Distance (foot) & Height (foot) & Predicted Value &Residual \\ \cline{1-4}0 & 4 & 4.215 & -0.215 \\\cline{1-4}2 & 8.4 & 8.16588 & 0.23412 \\\cline{1-4}6 & 12.1 & 13.23804 & -1.13804 \\\cline{1-4}9 & 14.2 & 14.56626 & -0.36626\\\cline{1-4}12 & 13.2 & 13.77228 & -0.57228 \\\cline{1-4}13 & 10.5 & 13.03602 & -2.53602 \\\cline{1-4}15 & 9.8 & 10.8561 & -1.0561 \\\cline{1-4}\end{tabular}[/tex]

The predicted value are obtained by plugging in the x-value into the best fit equation and the residuals is the difference between the actual value and the predicted value.

6. a. A residual plot can be used to as assessment with regards to meeting the assumptions of a linear regression model.

A residual plot that is randomly scattered about zero indicates that a linear model is appropriate for the data.

The data points in the residual plot are not expressed as being randomly scattered around zero.

The pattern that exists in the residual plot indicates that the values are positive for x-values that are either low or high, and the middle x-values have a negative residuals. Therefr;

b. The number of positive residuals = 4

c. The number of negative residuals = 5

4. The general form of the exponential model of a function, y = A × e^(-k·t)  can be used to find the function for the data as follows;

A = The initial amount = The value at 0 = 100

y = The amount of radioactive material at a given time t

e = Euler's number = 2.71828

The datapoints in the table indicates;

88.3 = 100 × e^(-k × 1)

k = -㏑(0.883) ≈ 0.124

The exponential model is therefore; y = 100 × e^(-0.124·t)

b. The weight of the sample after 8 weeks can be obtained by plugging in t = 8 in the exponential function for the weight of the radioactive substance as follows;

y = 100 × e^(-0.124 × 8) ≈ 37.1

The weight of the sample after 8 weeks is about 37.1 grams

c. When the sample is 4 grams we get;

y = 4

4 = 100 × e^(-0.124 × t)

e^(-0.124 × t)  = 4/100 = 1/25

-0.124 × t = ln(1/25) = -ln(25)

t = ln(25)/0.124 ≈ 26

t ≈ 26 weeks

Therefore; The weight will be 4 grams after approximately 26 weeks

5. A linear regression can be performed using MS Excel to obtain the equation that models the data as follows;

y = 22.703·x + 2.5733

The square of the regression coefficient is; R² = 0.9995

a. The most appropriate equation to model the data in the table is; y = 22.703·x + 2.5733

b. The y-value when x = 10 can be predicted by plugging in x = 10 into the  model equation for the data as follows;

y = 22.703 * 10 + 2.5733 ≈ 229.60

Therefore;

c. The first time the y-value is 83, can be found by setting y = 83 in the equation and solve for x as follows;

83 = 22.703·x + 2.5733

22.703·x = (83 - 2.5733)

x = (83 - 2.5733)/22.703 ≈ 3.54

Therefore, the first time the y-value is 83 is when x is approximately 3.54

Learn more on the line of best fit here: https://brainly.com/question/16760506

#SPJ1

The outcomes of the statistical analysis can give medical professionals and patients important knowledge regarding the possible advantages of the new procedure.

The study of random events or phenomena is the focus of the mathematical field of probability. It is a way to gauge how likely something is to happen. It is represented by a number between 0 and 1, where 0 denotes the event's impossibility and 1 denotes its certainty. There are numerous ways to calculate probabilities, including utilizing theoretical or mathematical models, empirical data, and experimental data.

given

A statistical analysis would be useful to evaluate the effectiveness of the novel technique to the standard procedure based on the study's design.

The recovery periods of the two patient groups might be compared using statistical techniques like hypothesis testing and confidence intervals to assess the efficacy of the new therapy.

Researchers can establish whether the new approach is statistically significantly superior than the usual procedure in terms of minimizing recovery time by comparing the recovery times of the two groups.

The outcomes of the statistical analysis can give medical professionals and patients important knowledge regarding the possible advantages of the new procedure.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

We can expect approximately 90 mosquitoes in the trap at the end of the 13-week mosquito season.

Based on the given data, we can observe that the number of mosquitoes is increasing over time, and the increase is not constant. So, it would be unreasonable to continue counting individual mosquitoes after a certain point.

To estimate the number of mosquitoes at the end of the 13-week mosquito season, we can assume that the rate of increase remains constant over time. Using this assumption, we can find the average increase in mosquitoes per week, which is the difference between the number of mosquitoes in the last week and the number in the first week, divided by the number of weeks:

Average increase = (27 - 8) / 3 = 6.33

Then, we can use this average increase to estimate the number of mosquitoes in the 13th week:

Number of mosquitoes in the 13th week = 27 + 6.33 × 10 = 90.3

Since we cannot have a fraction of a mosquito, we can round this estimate to the nearest whole number.

Therefore, we can expect approximately 90 mosquitoes in the trap at the end of the 13-week mosquito season.

Learn more about word problems at https://brainly.com/question/21405634

#SPJ1

Diego can make 56 bags with each bag containing 8 brownies and 12 cookies.

To package both items, he can divide the items into groups of 8 brownies and 12 cookies. He will then make 56 of these groups, ensuring each bag contains 8 brownies and 12 cookies.

Diego has 48 brownies and 64 cookies to package. To make the same combination of items in each bag, he needs to group the items into groups of 8 brownies and 12 cookies.

This can be done by dividing the 48 brownies into 6 groups of 8, and the 64 cookies into 5 groups of 12. He then needs to combine these two groups together, making 56 total bags.

Each of these bags will contain 8 brownies and 12 cookies. This is one way of packaging both items so that each bag has the same combination.

To know more about combination click on below link:

https://brainly.com/question/20211959#

#SPJ11

Answer:

x > 3

Step-by-step explanation:

This is an open circle, meaning there will be no equal sign.

The line is going to the right of 3, meaning x > 3

So, our inequality is x > 3

Answer:

2.80

Step-by-step explanation:

It asks to find the shipping and handling price.

The first step is take that percentage, 20% and convert into decimal form. Then you need to multiply that by the original price. So it would be 0.2 x 14.

That gives you 2.80 which is the shipping and handling price. That's all you have to do.

Using trigonometric relations we can see that u = 4.28m

First we can find the length of the shared side using the trigonometric relation:

tan(56°) = x/1.65m

1.65m*tan(56°) = x

2.45m = x

Then the length of the bottom side of the right triangle in the right side is iven by:

tan(43°) = 2.45m/y

Solving for y:

y =  2.45m/tan(43°)

y = 2.63m

Then the length of u is:

u = 1.65m + 2.63m = 4.28m

Learn more about right triangles at:

https://brainly.com/question/2217700

#SPJ1

Answer:

Step-by-step explanation:

Let's represent the maximum number of operations per second as "x".

If the computer is running at 40% of the maximum, it is performing 0.4x operations per second.

We are given that the computer is performing 30 operations per second, so we can set up an equation:

0.4x = 30

Solving for x:

x = 75

Therefore, the maximum number of operations the computer can perform per second is 75.

So, the correct answer is 4. 75 operations per second.

Answer: 3 5/8 pizzas were there at the start of the party.

Step-by-step explanation:

At the party let number of pizzas were = x Aisha and her friends ate 2 1/2 pizzas after which 1 1/8 pizzas were left.

Therefore the equation formed will be

x- 2 1/2= 1 1/8

x-(5/2)= 9/8

x= 9/8 + 5/2

x= 29/8= 3 5/8

Therefore 3 5/8 pizzas were there at the start of the party.

The percent that reported mushroom as their favorite from the pizza shop survey would be 10 %.

The percent that instead reported cheese or pepperoni as their favorite is 62.5 %.

Out of 400 people, the number that would say their favorite was sausage is 50 people .

The percent that prefer mushroom would be:

= Number of those who chose mushroom / Number surveyed

= 8 ( 35 + 8 + 15 + 12 + 10 )

= 8 / 80

= 10 %

The percentage that instead chose cheese or pepperoni:

= ( 15 + 35 ) / ( 35 + 8 + 15 + 12 + 10 )

= 50 / 80

= 62.5 %

The number out of 400 that would be expected to choose sausage :

= 10 / ( 35 + 8 + 15 + 12 + 10 ) x 400

= 50 people

Find out more on surveys at https://brainly.com/question/27475825

#SPJ1

The optimal solution would be to use $240 worth of professional grade material for each frame.

An optimal solution is a solution that provides the best possible outcome for a problem or situation, given a set of constraints or requirements. In mathematical optimization, an optimal solution is the solution that maximizes or minimizes an objective function while satisfying a set of constraints.

In other words, an optimal solution is the solution that is most efficient, effective, or desirable according to a certain set of criteria. It is the solution that achieves the best possible outcome, given the available resources and limitations.

To find the optimal solution, we need more information about the specific weight specification and the cost of different types of materials.

However, if we assume that there is only one type of material available, and that it costs $x per yard, we can set up an equation to find the optimal solution:

30x = cost per frame

If the professional grade material costs $8 per yard, then the equation becomes:

30(8) = $240 per frame

So, the optimal solution would be to use $240 worth of professional grade material for each frame, assuming that it meets the weight specification. If the weight specification requires a different amount of material, or if there are other materials available at different prices, the optimal solution would be different.

To know more about equation visit:

https://brainly.com/question/545403

#SPJ1

There are 100,000 possible five-digit student ID numbers that can be created if repeat digits are allowed (10^5).

However, if repeats are not allowed, there are only 9 x 9 x 9 x 9 x 9 = 590,490 possible student ID numbers that can be created (9^5).

The reason for the difference is that when repeats are allowed, you can use the same digit multiple times, for example "11111".

When repeats are not allowed, you can only use each digit once, for example "12345". The possible permutations of the digits 0-9 increase as more digits are added to the ID number, meaning that the more digits there are, the more possible combinations there are.

Therefore, when repeats are not allowed, the number of possible combinations is reduced significantly. In the case of five-digit student ID numbers, the difference is almost twofold.

To know more about combinations click on below link:

https://brainly.com/question/20211959#

#SPJ11

The extent to which a sample over or under represents characteristics of the population is known as sampling error.

Sampling error is the difference between the characteristics of a sample and the characteristics of the population from which it is drawn. Sampling error occurs when a sample does not accurately represent a population due to the selection of individuals. It is measured as the difference between a sample statistic and the corresponding population parameter. For example, if a sample of 100 people is taken from a population of 1,000 people, the sample might not accurately reflect the population as a whole due to random selection.

Sampling error is an important consideration in survey research, as it can have an effect on the accuracy of the results. Sampling error can be reduced by using larger sample sizes or by using more representative sampling methods.

For more such questions on Sampling error.

https://brainly.com/question/15521268#

#SPJ11

Answer:

£320 000

Step-by-step explanation:

Let x = original price of the boat.

When you reduce a price by 15%, what percent remains in the sale price?

100% - 15% = 85%

After reducing the price of the boat by 15%, the sale price is 85% of the original price.

85% of x = £272 000

0.85x = 272 000

Divide both sides by 0.85

x = 320 000

Answer: £320 000

The number of  pounds that he will have left over from 11 3/7 pounds is  4 2/7

To find out how many bags of granola Alex can fill, we need to divide the total amount of granola he made by the amount of granola in each bag.

We can convert 11 3/7 pounds to an improper fraction:

11 3/7 pounds  = 80/7 pounds

Also, we have

2 2/3 pounds  = 8/3 pounds

Now we can divide the total amount of granola by the amount in each bag:

(80/7) ÷ (8/3)

To divide fractions, we invert the second fraction (change it to its reciprocal) and multiply:

(80/7) × (3/8)

Simplifying, we get:

(80 x 3) / (7 x 8) = 30/7

Divide

(80 x 3) / (7 x 8) = 4 2/7

Hence, the bags is 4 2/7

Read more about fraction at

https://brainly.com/question/17220365

#SPJ1

Tyee can afford to rent the car for at most 2 days while staying within his budget.

Let x be the number of days Tyee can rent the car within his budget.

The total cost of renting the car will be the sum of the daily rental fee and the cost of miles driven:

Total cost = rental fee + (cost per mile x miles driven)

Using the given information, we can write the inequality:

74.90x + 0.13(175)x ≤ 210

Simplifying the expression, we get:

74.90x + 22.75x ≤ 210

97.65x ≤ 210

x ≤ 2.15

Therefore, Tyee can afford to rent the car for at most 2 days while staying within his budget.

Learn more about inequality here: brainly.com/question/11897796

#SPJ4