Answer:
The moment of inertia of the rotor is approximately [tex]1.105\times 10^{-6}[/tex] kilogram-square meters.
The rotor inertia may differ from these assumption due to differences in the shape of cross section.
Explanation:
We assume that rotor can be represented as a solid cylinder of radius [tex]r[/tex], length [tex]l[/tex], made of cooper ([tex]\rho = 8960\,\frac{kg}{m^{3}}[/tex]) and whose axis of rotation passes through its center of mass and is parallel to its cross section. By definition of Moment of Inertia and Theorem of Parallel Axes, the moment of inertia of the rotot is:
[tex]I = \frac{1}{4}\cdot \rho \cdot \left(\frac{\pi}{4} \right) \cdot R^{3}\cdot (3\cdot R^{2}+L^{2})[/tex]
[tex]I = \frac{\pi}{16}\cdot \rho \cdot R^{3}\cdot (3\cdot R^{2}+L^{2})[/tex] (Eq. 1)
Where:
[tex]\rho[/tex] - Density of copper, measured in kilograms per cubic meter.
[tex]R[/tex] - Radius of the rotor, measured in meters.
[tex]L[/tex] - Length of the rotor, measured in meters.
[tex]I[/tex] - Moment of inertia, measured in kilogram-square meters.
If we know that [tex]\rho = 8960\,\frac{kg}{m^{3}}[/tex], [tex]L = 25\times 10^{-3}\,m[/tex] and [tex]R = 8.98\times 10^{-3}\,m[/tex], the estimated moment of inertia of the rotor is:
[tex]I = \frac{\pi}{16}\cdot \left(8960\,\frac{kg}{m^{3}} \right)\cdot (8.98\times 10^{-3}\,m)^{3}\cdot [3\cdot (8.98\times 10^{-3}\,m)^{2}+(25\times 10^{-3}\,m)^{2}][/tex]
[tex]I \approx 1.105\times 10^{-6}\,kg\cdot m^{2}[/tex]
The moment of inertia of the rotor is approximately [tex]1.105\times 10^{-6}[/tex] kilogram-square meters.
From D'Alembert's Formula we know that net force of rigid bodies experimenting rotation equals the product of moment of inertia and angular acceleration. In this case, the purpose is minimizing moment of inertia and it is done by modifying the shape of the cross section so that rotor could be aerodynamically more efficient.
2) Why should you use a standard resistor so that the balance point is near the center of the bridge?
Answer:
Explanation:
I think I will say it is because most, if not all resistors have been made to standard already.
The value for the resistor that is chosen for two fixed arms from the Wheatstone Bridge have to be quite bear each other, as much as possible. The arm that moves and the other that doesn't move, their resistance values are made to be quite close as well. This makes the resistance of the arm that moves to be set somewhere in the middle, and as a result, the measurements don't exceed beyond the resistance range of the arm that moves.
I hope you understand?
Use the following clues to help fill in the chart on the next page. Put an X in the spaces that are INCORRECT and Highlight the
CORRECT
1 The wizard with the lavender wand is in Ravenel or Sparrowan, and earned 50 or 60 points
2. Gorgonscale earned 10 points less than Sparrowman
3 Lynn scored 20 points less than the wizard with the incense wand.
4. Timmy scored 70 or 80 points. He is in Gorgonscale or Hydraden
5. Among Bennie and the wizard from Sparrowan, one earned 70 points and the other has the lavender wand.
6. The mandragore wand belongs to Edward or to the House of Hydraden
7 Ravenel didn't earn 60 points and Edward is not among it's wizards
8. Bennie scored 10 points more than Edward
9. The wizard with the mandragore wand didn't earn 70 points.
inspections may be_____ or limited to a specific area such as electrical or plumbing
A. Metering
B. General
Facts about cellphones
Answer:
Your mobile phone has more computing power than the computers used for the Apollo 11 moon landing.
Mobile phones have to “work harder” to get a signal if you are in a moving vehicle.
The first mobile phone was made in 1973.
The first mobile phones that went on sale in 1983 cost nearly $4,000 each.
In 2012 Apple sold 340,000 phones per day.
4 out of 10 Brits admit to snooping on their partners phone.
Out of the 53% of snoopers that found incriminating evidence on their partner’s phone, 5% went on to terminate their relationship.
Waterproof mobile phones came to market because Japanese youngsters like to use them in the shower.
Apparently mobile phones have 18 times more bacteria on them than toilet handles!
Phubbing describes the act of snubbing someone by using your mobile phone in their company.
In 2015 more people died from taking selfies than shark attacks.
Teenagers that use a phone more than 2 hours a day increase their risk of depression and anxiety.
Nomobophobia is severe anxiety caused by the thought or act of losing your phone or running out of battery.
Explanation:
The critical resolved shear stress for a metal is 36 MPa. Determine the maximum possible yield strength (in MPa) for a single crystal of this metal that is pulled in tension.
Answer:
72 MPa
Explanation:
Critical resolved shear stress = 36 MPa
calculate the maximum possible yield strength for a single crystal of the metal
first we have to express the critical resolved shear stress as
бy = 2т[tex]_{critical}[/tex]
given that the minimum stress needed to introduce yielding curve will occur at Ψ = λ = 45
where : бy = yielding stress
t[tex]_{critical}[/tex] = 36MPa
therefore the maximum possible yield strength
= (2) * (36)
= 72 MPa
I need help on this ASAP PLZ?
Answer:
Explanation:
7. False
8. True
9. True
10.True
11. True
Nicole designs the hardware configuration of workstations that will be deployed to a newly formed company. She sets up the networking capabilities and policies that will govern the workstations when connected to the company network. What is her role in her company?
Answer:
a Network Engineer (architect)
Explanation:
Indeed, as a Network Engineer, we would expect Nicole to be in charge of planning, setting up, and managing the software and hardware components of the computer networks so that they function as intended.
A Network Engineer therefore would be responsible for setting up the networking capabilities and policies that will govern the workstations when connected to the company network.
(TCO 7) Find the resolution of the Fourier transform if a signal is sampled at 16,384 samples/second and we collect a total of 8,192 data points and then apply the FFT algorithm to them.
Answer:
Resolution of Fourier transform = 2Hz
Explanation:
Given:
Sample signals = 16,384 samples/second
Number of data points = 8,192 oints
Find:
Resolution of Fourier transform
Computation:
Resolution of Fourier transform = fs / N
Resolution of Fourier transform = 16,384 / 8,192
Resolution of Fourier transform = 2Hz
Two vehicles collided head on while traveling on a curve tangent with a 3% grade. Vehicle V1 skidded 195 feet downhill before colliding with vehicle V2. Vehicle V2 skidded 130 feet. The police report estimates that the speed of both vehicles at impact was 25 mph, based on vehicle deformation. Assume a coefficient of friction of 0.48. What is V1 speed at the beginning of the skid?
Answer:
Speed V1 at the beginning of the skid = 57.075 mph
Explanation:
Calculate the V1 speed at the beginning of the skid
V1 ( speed before brake was applied ) = ?
distance travelled by Vehicle 1 = 195 ft
curve tangent for vehicle 1 = - 3% = - 0.03
coefficient of friction = 0.48
speed at Impact = 25 mph
To determine the V1 speed at the beginning of the skid we have to apply AASTHO
d1 = [tex]( \frac{VA^{2} - VA^{12} }{30(F+N)} )[/tex]
195 = [tex](\frac{VA^2- 25^2}{30(0.48-0.03)} )[/tex]
Hence : VA = 57.075 mph
What is the meaning of *binuhat lakas nang loob na ibinaon
Answer:
carried courage buried
Explanation:
its Filipino