Explain how you can use this product to determine that (15)(5)=75

Hence, the tree is roughly 67 feet tall (rounded to the nearest foot) as the angle of elevation being 61 degrees.

Angles are polygons created when two rays intersect at a location known as the vertex. The rays might alternatively be referred as legs or sides. Angles are used to describe how much rotation or turning there is between two rays and are often measured in minutes or radians. Acute lengths, right angles, acute angles, and linear angles are the four most typical angles. Obtuse angles are those that are higher than 90 degrees, acute angles are those that are less than 90 °, and straight sides are those that are precisely 180 degrees.

given

The height of the tree serves as one side of a right triangle, the distance between Elliott and the tree serves as the other side, and the hypotenuse serves as the line of sight from Elliott to the top of the tree. Trigonometry is what we'll need in order to determine the tree's height.

We can rearrange the letters to get: since we know that tan() = opposite/adjacent.

inverse = nearby * tan(θ)

With the next side being 32 feet and the angle of elevation being 61 degrees, we have the following:

opposition is equal to 32 * tan(61°) 66.87 feet.

Hence, the tree is roughly 67 feet tall (rounded to the nearest foot) as the angle of elevation being 61 degrees.

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

She took five days of daily 30-minute walks. She walked for 46 minutes each day for the following three days. 36 minutes per day was the average time she spent walking.

To find the average time she spent walking, we need to add up the total time she spent walking and divide it by the number of days she walked.

For the first 5 days, she walked for a total of:

30 minutes/day x 5 days = 150 minutes

For the next 3 days, she walked for an average of 46 minutes/day, so she walked a total of:

46 minutes/day x 3 days = 138 minutes

The total time she spent walking over 8 days is:

150 minutes + 138 minutes = 288 minutes

The average time she spent walking is:

288 minutes / 8 days = 36 minutes/day

Therefore, the average time she spent walking is 36 minutes per day.

To learn more about the average time, refer:-

https://brainly.com/question/29122936

#SPJ4

Answer:5/2=2.5

Step-by-step explanation:

[tex]\sqrt{27}=\sqrt{3^{3}}=3^\frac{3}{2}\\\\we \ can \ show \ \sqrt{3^{3}} \ as \ 3^\frac{3}{2}\\3^{1}*3{\frac{3}{2}}=3^{1+\frac{3}{2}}=3^{\frac{5}{2}}\\n=\frac{5}{2}[/tex]

Answer:

[tex]n=\dfrac{5}{2}[/tex]

Step-by-step explanation:

Rewrite 27 as the product of prime numbers:

[tex]\implies 27 = 3 \cdot 3 \cdot 3 = 3^3[/tex]

Therefore, replace 27 with 3³ in the given equation:

[tex]\implies 3 \times \sqrt{3^3}=3^n[/tex]

[tex]\textsf{Apply the exponent rule:} \quad \sqrt[n]{a^m}=a^{\frac{m}{n}}[/tex]

[tex]\implies 3 \times 3^{\frac{3}{2}}=3^n[/tex]

[tex]\textsf{Apply the exponent rule:} \quad a^b \cdot a^c=a^{b+c}[/tex]

[tex]\implies 3^1 \times 3^{\frac{3}{2}}=3^n[/tex]

[tex]\implies 3^{1 +\frac{3}{2}}=3^n[/tex]

[tex]\implies 3^{\frac{2}{2} +\frac{3}{2}}=3^n[/tex]

[tex]\implies 3^{\frac{5}{2}}=3^n[/tex]

[tex]\textsf{Apply the exponent rule:} \quad a^{f(x)}=a^{g(x)} \implies f(x)=g(x)[/tex]

[tex]\implies \dfrac{5}{2}=n[/tex]

Therefore, the value of n is 5/2.

Answer:

429

Step-by-step explanation:

Los dos números que multiplicados den 30 son 5 y 6. Para encontrar dos números que sumados o restados den -11, debemos verificar todas las posibles combinaciones. Al hacerlo, descubrimos que -5 y -6 sumados dan -11. Por lo tanto, los dos números son 5 y -6.

Answer:

C. 4/27

Step-by-step explanation:

Let's use the multiplication rule of probability to calculate the probability that both balls drawn are white:

P(white ball from Bag 1) = 2/6 = 1/3

P(white ball from Bag 2) = 4/9

Therefore, the probability of drawing a white ball from each bag is:

P(white from Bag 1 and white from Bag 2) = P(white from Bag 1) * P(white from Bag 2)

= (1/3) * (4/9)

= 4/27

So, the answer is C. The probability that both balls are white is 4/27.

Linda traveled faster than Imani because when t =1 , linda traveled 65 miles and Imani traveled 60 miles and linda travelled at a faster rate because when t=0,

She travelled 10 miles and Imani travelled 0 miles these are cοrrect answer. The prοvided graph's cοοrdinates are (2, 120) and (4, 240).

A graph is a structure that amοunts tο a set οf items where sοme pairs οf the οbjects are in sοme manner "cοnnected" in discrete mathematics, mοre specifically in graph theοry. The items are represented by mathematical abstractiοns knοwn as vertices (sοmetimes knοwn as nοdes οr pοints), and each pair οf cοnnected vertices is knοwn as an edge. Generally, a graph is represented diagrammatically as a cοllectiοn οf dοts οr circles fοr the vertices cοnnected by lines οr curves fοr the edges. Graphs are οne οf the tοpics studied in discrete mathematics.

Slοpe with (2, 120) and (4, 240) is

Slοpe (y2-y1)/(x2-x1)

= (240-120)/(4-2)

= 120/2

= 60

Put m=60 and (x, y)=(2, 120) in y=mx+c, we get

120=60(2)+c

c=0

Sο, equatiοn is y=60x

Put x=0, 1, 2, 3 and 4, we get

y= 0, 60, 120, 180, 240

(0, 0), (1, 60), (2, 120), (3, 180) and (4, 240)

To learn more about graph from the given link

https://brainly.com/question/19040584

#SPJ1

Answer: V(t) = 5000 * (1.07)^t

Step-by-step explanation:

This equation can be used to analyze the error of the backward Euler method directly for the model problem (4.3) with x an arbitrary real constant. The backward Euler method is a numerical method for solving ordinary differential equations (ODEs). It is an implicit method, meaning that it requires the solution of a nonlinear equation at each time step.

The error of the backward Euler method can be analyzed directly for the model problem (4.3) with x an arbitrary real constant. The backward Euler solution of the problem is given by the formula (4.10).

The backward Euler method is given by:
y_n+1 = y_n + h*f(t_n+1, y_n+1)

Where h is the time step, f is the function defining the ODE, t_n is the current time, and y_n is the current solution. The backward Euler method is an implicit method because it requires the solution of the nonlinear equation f(t_n+1, y_n+1) = 0 at each time step.

The error of the backward Euler method can be analyzed directly for the model problem (4.3) with x an arbitrary real constant. The model problem is given by:
y' = x*y

The exact solution of this problem is given by:
y(t) = y_0*exp(x*t)

The backward Euler solution of the problem is given by the formula (4.10):
y_n+1 = y_n/(1 - h*x)

The error of the backward Euler method is given by the difference between the exact solution and the numerical solution:
e_n = y(t_n) - y_n

By substituting the exact solution and the numerical solution into the error equation, we can analyze the error of the backward Euler method directly:
e_n = y_0*exp(x*t_n) - y_n

By rearranging the terms and using the formula for the numerical solution, we can obtain an equation for the error:
e_n = (y_0*exp(x*t_n) - y_n)/(1 - h*x)

This equation can be used to analyze the error of the backward Euler method directly for the model problem (4.3) with x an arbitrary real constant.

Know more about Euler method here:

https://brainly.com/question/30860703

#SPJ11

The formula for the function f(x): (x-  k)q(x) + r for the specified value of k. F(x) = x3 − x2 − 10x + 5, k = 3 is f(x) = (x - 3)([tex]x^2[/tex] + 2x - 1) - (4x - 5).

To write the function in form f(x) = (x − k)q(x) + r, we need to divide the given polynomial by (x-k) using long division. Here's the long division process:

           [tex]x^2[/tex] + 2x - 1

   ----------------------

x - 3 | [tex]x^3[/tex] - [tex]x^2[/tex] - 10x + 5

       - [tex]x^3[/tex] + [tex]3x^2[/tex]

       ---------------

            - [tex]2x^2[/tex] - 10x

            + [tex]2x^2[/tex] - 6x

            ------------

                    - 4x + 5

Therefore, we have:

f(x) = (x - 3)([tex]x^2[/tex] + 2x - 1) - (4x - 5)

Thus, the function with the formula f(x)= (x-k)q(x) + r for k= 3 is:

f(x) = (x - 3)([tex]x^2[/tex] + 2x - 1) - (4x - 5)

To learn more about function, refer:-

https://brainly.com/question/30721594

#SPJ4

Answer:

Step-by-step explanation:

n(u)=100

n(s)=60

n(m)=50

n(snm)=25

n(sum)=85

n(sum)compliment = n(u)-n(sum)

= 100-85

= 15

Answer:

If no other deposits or withdrawals are made, the account will have a balance of $1406.08 after 9 months. Find the annual interest rate. Expert Answer.

1 answer

·

Top answer:

Given that P=1,250A=1,406.08n=9 month

Step-by-step explanation:

The trigonometric identities cos 2θ − cotθ sin 2θ − tanθ= tan 2θ, is verified below with the help of elementary trigonometric identities.

Trigonometric identities are equations that involve trigonometric functions and are true for all values of the variables in the equation. They are useful in solving trigonometric equations, simplifying expressions involving trigonometric functions, and evaluating integrals in calculus.

There are several types of trigonometric identities, including:

Pythagorean identities: These involve the Pythagorean theorem, which states that in a right triangle, the square of the length of the hypotenuse is equal to the sum of the squares of the lengths of the other two sides. The Pythagorean identities express this relationship in terms of trigonometric functions, such as sin²θ + cos²θ = 1.

Reciprocal identities: These involve the reciprocals of trigonometric functions, such as csc θ = 1/sin θ and sec θ = 1/cos θ.

We will start with the left-hand side of the identity and simplify it using the trigonometric identities:

cos 2θ − cotθ sin 2θ − tanθ

= cos 2θ − (cosθ/sinθ)(2sinθcosθ) − (sinθ/cosθ)

= cos 2θ − 2cosθsinθ − sin²θ/cosθ

= cos²θ − sin²θ − 2cosθsinθ − sin²θ/cosθ

= (cos²θ - sin²θ) - (sin²θ/cosθ) - 2cosθsinθ

= cos²θ - sin²θ - sin²θ/cosθ - 2sinθcosθ

= cos²θ - sin²θ - sin²θ/cos²θ - 2sinθcosθ/cos²θ (since cosθ ≠ 0)

= cos²θ - sin²θ - (sin²θ + 2sinθcosθ)/cos²θ

= cos²θ - sin²θ - sin(2θ)/cos²θ

= (cos²θ - sin²θ)/cos²θ - sin(2θ)/cos²θ

= (cos²θ/cos²θ) - (sin²θ/cos²θ) - sin(2θ)/cos²θ

= 1 - tan²θ - sin(2θ)/cos²θ

= (1 - tan²θ) - sin(2θ)/cos²θ

= (sec²θ) - (2sinθcosθ)/cos²θ

= (sec²θ) - (2sinθ/cosθ)

= (sec²θ) - 2tanθ

= tanθ + 1 - 2tanθ - 2tanθ (using the identity sec²θ = tan²θ + 1)

= tan²θ - 4tanθ + 1

= (tanθ - 1)²

= tan²θ - 2tanθ + 1

Therefore, we have shown that:

cos 2θ − cotθ sin 2θ − tanθ = tan 2θ

This verifies the given identity.

To know more about functions visit:

https://brainly.com/question/6904750

#SPJ1

Answer:

C) Some number divided by 3

Step-by-step explanation:

y is an unknown variable and is being divided by 3.

60 tablets of the multivitamin, with 17g (17,000mg) of vitamin C per tablet, contains 1,020,000mg of vitamin C in total.

If one tablet of the multivitamin contains 17g of vitamin C, then 60 tablets would contain 60 times that amount:

60 tablets x 17g of vitamin C per tablet = 1020g of vitamin C

However, it is more common to express vitamin C (and other nutrients) in milligrams (mg) rather than grams (g). To convert from grams to milligrams, we can multiply by 1000:

1020g of vitamin C x 1000 mg/g = 1,020,000 mg of vitamin C

Therefore, 60 tablets of the multivitamin contain 1,020,000 mg of vitamin C.

Just to clarify, in the answer above, I made a mistake in the units. 17g is actually 17,000mg, not 17mg. So the correct calculation is:

If one tablet of the multivitamin contains 17,000mg of vitamin C, then 60 tablets would contain 60 times that amount:

60 tablets x 17,000mg of vitamin C per tablet = 1,020,000mg of vitamin C

Therefore, 60 tablets of the multivitamin contain 1,020,000mg of vitamin C.

Learn more about milligrams here:

https://brainly.com/question/29827935

#SPJ4

Answer:

There are 16 ounces in 1 pound, so Brianna bought 2 x 16 = <<2*16=32>>32 ounces of strawberries.

The total cost was 4.80 dollars for 32 ounces.

To find the price per ounce, we divide the total cost by the number of ounces:

4.80 / 32 = 0.15

Therefore, the price of dollars per ounce for strawberries is $0.15.

Step-by-step explanation:

Therefore, the area of the composite figure is 65 square centimeters. Therefore, the area of the composite figure is approximately 150.8 square centimeters.

In mathematics, the area is the measure of the size of a two-dimensional surface or shape. It is the amount of space inside the boundary of a flat object, such as a triangle, rectangle, circle, or any other polygon. The standard unit of measurement for area is square units, such as square meters (m²), square centimeters (cm²), or square feet (ft²). To calculate the area of a shape, we usually use a formula that depends on the shape's geometry and dimensions, such as its length, width, radius, or height. Area has many applications in everyday life, such as calculating the size of a room, the amount of paint needed to cover a wall, or the area of land required to build a house or grow crops. In mathematics and science, area is also used to solve problems in geometry, physics, engineering, and other fields.

Here,

1. Combination of Square and Rectangle

To find the area of this composite figure, we need to break it down into simpler shapes and add up their areas. The figure consists of a square with sides of 5 cm, a rectangle with sides of 4 cm and 9 cm, and a square with sides of 2 cm.

The area of the square with sides of 5 cm is:

A1 = (side)²

= (5 cm)²

= 25 cm²

The area of the rectangle with sides of 4 cm and 9 cm is:

A2 = length x width

= (9 cm) x (4 cm)

= 36 cm²

The area of the square with sides of 2 cm is:

A3 = (side)²

= (2 cm)²

= 4 cm²

To find the total area of the composite figure, we add up the areas of these three shapes:

A = A1 + A2 + A3

A = 25 cm² + 36 cm² + 4 cm²

A = 65 cm²

To know more about area,

https://brainly.com/question/30106292

#SPJ1

The area of the triangle is 15 square units.

The area of a triangle is a measure of the size of the region enclosed by the three sides of the triangle. The formula for finding the area of a triangle depends on the length of its base and height, which are usually denoted by "b" and "h", respectively.

We can find the area of the triangle with vertices (10, 1), (7, 11), and (7, 1) by using the formula for the area of a triangle:

area = (1/2) * base * height

where the base is the distance between the two points with the same y-coordinate, and the height is the distance from the third point to the line that contains the base.

The base is a vertical line segment with length 11 - 1 = 10, since the two points (7, 11) and (7, 1) have the same y-coordinate.

The height is the distance from the point (10, 1) to the line that contains the base. Since the line is vertical and passes through the point (7, 1), the distance is simply the difference between the x-coordinates of the two points: 10 - 7 = 3.

Substituting these values into the formula, we get:

area = (1/2) * 10 * 3

    = 15

Therefore, the area of the triangle is 15 square units.

To know more about area of triangle, visit:

https://brainly.com/question/19305981

#SPJ1

The density of the mixture (liquid C) is 1.44 g/cm³ (rounded to 2 decimal places).

What is density ?

Density is a physical property of matter that describes how much mass is contained within a given volume. It is defined as the amount of mass per unit volume of a substance. In other words, density tells us how tightly packed the molecules or particles of a substance are.

The formula for density is:

density = mass / volume

where mass is the amount of matter in an object or substance, and volume is the amount of space it occupies.

According to the question:
To find the density of the mixture, we need to use the formula:

density of mixture = (mass of liquid A + mass of liquid B) / (volume of liquid A + volume of liquid B)

We can find the masses of the liquids by using their densities and volumes:

mass of liquid A = density of A x volume of A = 1.09 g/cm³ x 43 cm³ = 46.87 g

mass of liquid B = density of B x volume of B = 1.53 g/cm³ x 166 cm³ = 254.58 g

Now we can substitute the values into the formula:

density of mixture = (mass of liquid A + mass of liquid B) / (volume of liquid A + volume of liquid B)

density of mixture = (46.87 g + 254.58 g) / (43 cm³ + 166 cm³)

density of mixture = 301.45 g / 209 cm³

Therefore, the density of the mixture (liquid C) is 1.44 g/cm³ (rounded to 2 decimal places).

To know more about density visit:
https://brainly.com/question/29775886
#SPJ1

The number of males in the village in 1999 was 1200, given that the male to female ratio was 3:5 and the total population was 2000.

Let's assume that in the year 1999, there were M males and W females living in the village, so the total population would be P = M + W = 2000.

Then, in the year 2004, the male population increased by 10%, so the number of males became 1.1M, and the female population decreased by 6%, so the number of females became 0.94W.

The total population remained unchanged, so we have:

1.1M + 0.94W = P = 2000

We also know that P = M + W, so we can substitute this into the above equation:

1.1M + 0.94W = M + W

0.1M = 0.06W

M/W = 3/5

So the ratio of males to females in the village in 1999 was 3:5. Therefore, we can write:

M + W = 2000

3/5 (M + W) = 3/5 (2000)

M = 1200

Therefore, there were 1200 males living in the village in the year 1999.

We can check that this answer is consistent with the information given in the problem. In 1999, there were 2000 people in the village, and the ratio of males to females was 3:5. This means that the number of males is 3/8 of the total population, and the number of females is 5/8 of the total population:

Number of males = 3/8 x 2000 = 750

Number of females = 5/8 x 2000 = 1250

Now let's apply the changes that occurred between 1999 and 2004. The male population increased by 10%, so the new number of males is:

1.1 x 750 = 825

The female population decreased by 6%, so the new number of females is:

0.94 x 1250 = 1175

The total population is:

825 + 1175 = 2000

So the total population remained unchanged, as required by the problem statement. Therefore, our answer of 1200 males in 1999 is consistent with the information given in the problem.

Learn more about ratio here:

https://brainly.com/question/1504221

#SPJ4

one possible solution is to sell 60 tacos and 60 burritos. To graph these inequalities, we can start by graphing the boundary lines for each inequality, which are obtained by replacing the inequality signs with equal signs.

Let x be the number of tacos sold and y be the number of burritos sold. Then we can write the following system of inequalities:

x + y ≤ 120 (since Benjamin only has enough supplies to make 120 tacos or burritos)

3.75x + 8.25y ≥ 660 (since Benjamin must sell at least $660 worth of tacos and burritos each day)

To graph these inequalities, we can start by graphing the boundary lines for each inequality, which are obtained by replacing the inequality signs with equal signs.

For the first inequality, we have:

x + y = 120

This is the equation of a straight line passing through the points (0, 120) and (120, 0). We can graph this line by plotting these two points and connecting them with a straight line.

For the second inequality, we have:

3.75x + 8.25y = 660

This is the equation of a straight line in slope-intercept form, y = (-3.75/8.25)x + 80. We can graph this line by plotting the y-intercept (0, 80) and using the slope (-3.75/8.25) to find additional points on the line.

Next, we need to shade the feasible region, which is the region that satisfies both inequalities. This is the region below the line x + y = 120 and above the line 3.75x + 8.25y = 660.

One possible solution is the point where these two lines intersect, which we can find by solving the system of equations:

x + y = 120

3.75x + 8.25y = 660

Solving for x and y, we get:

x = 60

y = 60

Therefore, one possible solution is to sell 60 tacos and 60 burritos.

Learn more about inequality here

https://brainly.com/question/28823603

#SPJ1

The formulas will calculate the average profitability for customers with income < 40,000 and those with income >= 40,000 respectively.

The first step towards completing the given analysis is to create two groups of customers based on their income levels. The groups should consist of customers with income < 40,000 and those with income > = 40,000. The detailed explanation is provided below:Step-by-step explanation:Here, we need to compare the average profitability of two groups of customers based on their income levels, one with income less than 40,000 and the other with income greater than or equal to 40,000.The first step towards completing this analysis is to create two groups of customers based on their income levels. The groups should consist of customers with income < 40,000 and those with income > = 40,000. This can be achieved using the following steps:1. Open a new Excel workbook and import the dataset that needs to be analyzed.2. Once the data is imported, create a new column named 'Income Group' that will classify customers into the two groups based on their income level. To do this, we can use the following formula: =IF(B2<40000,"<40,000",">=40,000")Here, B2 is the cell that contains the income value of the first customer.3. Drag the formula down to the last cell in the column to apply it to all customers. This will create two groups of customers based on their income levels.4. Now, we need to calculate the average profitability of each group. To do this, we can use the following formula: =AVERAGEIF(C2:C11,"<40,000",D2:D11) and =AVERAGEIF(C2:C11,">=40,000",D2:D11)Here, C2:C11 contains the income group values, D2:D11 contains the profitability values, and "<40,000" and ">=40,000" are the criteria for each group. These formulas will calculate the average profitability for customers with income < 40,000 and those with income >= 40,000 respectively.

Learn more about Average

brainly.com/question/24057012

#SPJ4

The multiplication problem that matches the model is: 5 * 1/2

A representation is a way of showing multiplication.  A model for multiplication is slightly more sophisticated and it is comprised of several related representations that all have the same structure. There are two models for multiplication  namely repeated addition and arrays.

From the attached file, we see that there are 5 images. Now, each image depicts a triangle that is shaded in half.

Thus, it means that each triangle represents the fraction 1/2.

Thus, the model will be expressed as a multiplication model as;

5 * 1/2

Read more about Multiplication Model at; https://brainly.com/question/10873737

#SPJ1

To get the interquartile range (IQR) of the data set, we must first determine the median [tex](Q2). 00 0 0 12\dfrac12 2 1 begin fraction,[/tex] divide by 2, end fraction.

[tex]00 0 011 1 1 12\dfrac12 2 1 begin fraction,[/tex]divide by 2, end fraction 22 2 2 11 1 1 14\dfrac14 4 1 begin fraction, divide by 4, end fraction 54\dfrac 5 4 5 end fraction, 5, divided by 4, start fractio When the data is sorted in order, the median is the middle value, thus we must locate the value that is exactly in the centre[tex]0 0 0 11]  1 12\dfrac12 2 1 begin fraction,[/tex] divide by 2, end fraction 22 2  11 1 1 14\dfrac14 4 1 begin fraction, divide by 4, end fraction 54\dfrac54 4 5 end fraction, 5, divided by 4, start fraction The median is (1 + 1)/2 = 1 since the middle two numbers are 1 and 1. The median of the lower half of the data (Q1) and the median of the upper half of the data (Q2) must then be determined (Q3) For the bottom half: 00 0 0 11 1 1 Q1 = 0 since the intermediate value is 0. For the top half: 12\dfrac12.

Learn more about fraction  here:

https://brainly.com/question/10354322

#SPJ4

Answer:

Area = π*r^2

Area = 113.1 units^2

Step-by-step explanation:

The figure drawn is a circle.  The ancient Greeks devised an approximation of the area of circles by dividing the circle into a series of small triangles with their peaks at the center of the circle and their bases  are formed by the curve of the circle.  Although this means there is an error because the circumference is not a straight line, they made the triangles small enough so that the error would be minimized.  They found that the area of the circle was related to it's radius by the expression: Area = π*r^2.  

Without retracing their steps, let's simply use the formula that is now the accepted measure of the area of a circle.  Pi (π) is 3.14 to 3 decimal places.  Far more accurate values are known, but 3.14 offers reasonable accuracy, assuming this is not intended for space flight.

Area = π*r^2

Area = 3.34*(6)^2

Area = 113.1 units^2

Therefore , the solution of the given problem of percentage comes out to be down payment is 32% of the overall cost of the vehicle.

In statistics, a% is a number or value that is expressed as a fraction of 100. The terms "pct.," "pct.," but also "pc" are also infrequently used. Nevertheless, the symbol "%" is frequently used to indicate it. The percentage sum is flat; there are no dimensions. Since the numerator of a percentage is always 100, percentages truly constitute integers. Either the percent symbol (%) or the word "percent" must come before a number to denote that it is a percentage.

Here,

Levi Hempke wishes to borrow a maximum of $14,280 to finance a $21,000 vehicle. Consequently, he intends to put down:

=> $21,000 - $14,280 = $6,720

We must divide his down payment by the total cost of the car, multiply by 100 to convert to a percentage, and

then determine the percentage of the total cost of the car that he should put down:

=>  ($6,720 ÷ $21,000) × 100 = 32%

Levi's down payment should therefore equal 32% of the overall cost of the vehicle.

To know more about percentage visit:

https://brainly.com/question/28269290

#SPJ1