Explain what selective permeability is, how it is achieved, and how different kinds of molecules cross the membrane.
LO #4 (Set 1)

Answers

Answer 1

Selective permeability refers to the property of cell membranes that allows certain substances to pass through while preventing others from doing so. This is achieved through the presence of membrane proteins that selectively regulate the transport of specific molecules across the membrane. These proteins act as gates or channels that allow small, polar molecules like water and gases to pass through easily, while larger or non-polar molecules are more restricted.

There are several ways that molecules can cross the membrane, including simple diffusion, facilitated diffusion, and active transport. Simple diffusion is the movement of molecules from an area of high concentration to an area of low concentration without the use of energy. Facilitated diffusion is similar, but relies on the assistance of carrier proteins to transport molecules across the membrane. Active transport, on the other hand, requires energy in the form of ATP to move molecules against their concentration gradient.

The size, charge, and polarity of molecules all play a role in determining how easily they can cross the membrane. Small, non-polar molecules like oxygen and carbon dioxide can diffuse through the lipid bilayer, while larger, polar molecules like glucose require the assistance of carrier proteins. Overall, the selective permeability of cell membranes plays a crucial role in regulating the flow of molecules in and out of cells, ensuring that they maintain the proper balance of nutrients and waste products.

Learn more about facilitated diffusion:

https://brainly.com/question/18122054

#SPJ11


Related Questions

After at least 24 hours of incubation, do your prepared plates and broths appear to be sterile? Explain your answer.

Answers

After at least 24 hours of incubation, it is possible to determine if the prepared plates and broths appear to be sterile by observing their growth characteristics. Sterility refers to the absence of any living microorganisms, such as bacteria, fungi, or viruses.

If the plates and broths remain clear and show no signs of cloudiness or visible colonies, it is an indication that they are likely sterile.However, it's important to note that the absence of visible growth doesn't necessarily guarantee complete sterility, as some microorganisms may require longer incubation periods or specific conditions to grow. Additionally, certain slow-growing or non-culturable organisms may not be detected by standard culture methods.
To confirm sterility, additional testing, such as using a variety of culture media or applying molecular techniques like PCR, can be employed to detect the presence of any microbial contaminants. Overall, careful observation after the initial 24-hour incubation period can provide valuable insight into the sterility of the prepared plates and broths, but further testing may be required for a more definitive answer.

Learn more about plates here

https://brainly.com/question/26871451

#SPJ11

a random sample of 1,000 high school students was genetically tested for the tongue-rolling gene. the results indicated that 700 students were homozygous recessive for this trait (tt), 200 were heterozygous (tt), and the remaining 100 were homozygous dominant (tt). what are the allele frequencies for tongue rolling in this population?

Answers

To determine the allele frequencies, we can use the Hardy-Weinberg equation: pp2 + 2pq + qq = 1, where p is the frequency of the dominant allele (T) and q is the frequency of the recessive allele (t).

From the given information, we know that there are 700 students who are homozygous recessive (tt) and 100 who are homozygous dominant (TT). This means that the frequency of the recessive allele (q) is:

qq = 700/1000
qq = 0.7
q = √0.7
q = 0.84

Similarly, the frequency of the dominant allele (p) can be calculated as:

pp = 100/1000
pp = 0.1
p = √0.1
p = 0.316

Therefore, the allele frequencies for tongue rolling in this population are:
- Frequency of the recessive allele (t): 0.84
- Frequency of the dominant allele (T): 0.316


Given the data provided:

1. 700 students are homozygous recessive (tt)
2. 200 students are heterozygous (Tt)
3. 100 students are homozygous dominant (TT)

We will use the Hardy-Weinberg equation to determine the allele frequencies:

pp + 2pq + qq = 1

Where p is the frequency of the dominant allele (T) and q is the frequency of the recessive allele (t).

First, we'll find the frequency of each genotype:

1. Homozygous recessive (tt): 700 / 1,000 = 0.7
2. Heterozygous (Tt): 200 / 1,000 = 0.2
3. Homozygous dominant (TT): 100 / 1,000 = 0.1

Now, we will use the equation qq = homozygous recessive frequency to find q:

qq = 0.7
q = √0.7 ≈ 0.837

To find p, we can use the equation p + q = 1:

p = 1 - q
p = 1 - 0.837 ≈ 0.163

So, the allele frequencies for tongue rolling in this population are approximately:

1. Dominant allele (T): 16.3%
2. Recessive allele (t): 83.7%

To know more about gene visit:

https://brainly.com/question/8832859

#SPJ11

8.2 Why did you compare the percentage change in mass rather than simply the change in mass for each artificial cell?

Answers

Comparing the percentage change in mass rather than simply the change in mass for each artificial cell allows for a more meaningful comparison between cells of different initial masses.



For instance, let's say we have two artificial cells with initial masses of 1 gram and 10 grams, respectively. If both cells increase in mass by 0.1 grams, the absolute change in mass is the same for both cells, but the percentage change in mass is much greater for the 1-gram cell (10% increase) than the 10-gram cell (1% increase).

By comparing the percentage change in mass, we can more accurately assess the relative growth rates of the cells, independent of their initial masses. This is particularly useful when comparing a large number of cells with varying initial masses, as it allows us to make meaningful comparisons between them.

Visit to know more about Artificial cell:-

brainly.com/question/30078982

#SPJ11

Ketoconazole, fluconazole, clotrimazole and miconazole are broad-spectrum azoles used to treat _______ infections.
A.bacterial
B.fungal
C.protozoan
D.helminthic

Answers

Ketoconazole, fluconazole, clotrimazole, and miconazole are all broad-spectrum azoles that are used to treat B. fungal infections.

These antifungal medications work by inhibiting the synthesis of ergosterol, which is a vital component of fungal cell membranes. Without ergosterol, the fungal cell membrane becomes weakened and more susceptible to damage, ultimately leading to the death of the fungus. Ketoconazole is commonly used to treat systemic fungal infections such as candidiasis and aspergillosis, while clotrimazole and miconazole are often used topically to treat superficial fungal infections like athlete's foot and vaginal yeast infections. Fluconazole, on the other hand, is often used to treat both systemic and superficial fungal infections and is especially useful in treating infections caused by the Candida species. In summary, these broad-spectrum azoles are highly effective in treating a wide range of fungal infections, making them an important tool in the management of fungal diseases.

Learn more about infections :
https://brainly.com/question/28964805

#SPJ11

You are using a microscope with a 100X objective lens that has an angle of lens curvature of 70° You place a dot of oil (n°r-2) on the coverslip of the slide you want to observe. What is the resolving power of the 100x lens if you are using light of wavelength 560 nm?

Answers

This means the microscope can distinguish two points separated by at least 149.47 nm.

To calculate the resolving power of a microscope, we need to consider several factors such as the objective lens magnification, the angle of lens curvature, the refractive index of the medium (oil in this case), and the wavelength of the light being used. In this case, we are given the following information:
Objective lens magnification: 100X
Angle of lens curvature: 70°
Refractive index of oil: 2
Wavelength of light: 560 nm
The resolving power of a microscope can be calculated using the formula:
Resolving Power (RP) = \frac{λ }{ (2 * NA)}

where λ is the wavelength of the light, and NA (Numerical Aperture) is a value that depends on the refractive index of the medium (n) and the angle of lens curvature (α). The Numerical Aperture is calculated as:
NA = n * sin(α)
Now, let's calculate the resolving power step-by-step:
1. Calculate the Numerical Aperture (NA):
NA = n * sin(α)
NA = 2 * sin(70°)
NA ≈ 1.88
2. Calculate the Resolving Power (RP):
RP = \frac{λ }{ (2 * NA)}
RP = \frac{560 nm }{ (2 * 1.88)}
RP ≈ 149.47 nm
Thus, the resolving power of the 100X lens using light of wavelength 560 nm and oil with a refractive index of 2 is approximately 149.47 nm.

learn more about microscope Refer: https://brainly.com/question/18661784

#SPJ11

Which of the following statements provides the most significant support for the idea that viruses are nonliving chemicals?A) They are not composed of cells.B) They are filterable.C) They cannot reproduce themselves outside a host.D) They cause diseases similar to those caused by chemicals.E) They are chemically simple.

Answers

The fact that viruses cannot reproduce themselves outside a host cell provides the most significant support for the idea that viruses are nonliving chemicals.

Unlike living organisms, viruses lack the metabolic machinery needed to generate energy, build new components, and replicate themselves. Instead, they rely on the host cell's machinery to reproduce and generate new viral particles. Therefore, viruses cannot be considered living organisms since they cannot maintain an independent metabolism or reproduce on their own. The other options, such as their lack of cells (A), filterability (B), ability to cause disease (D), and chemical simplicity (E), do not provide as much significant support for the non-living nature of viruses as their inability to reproduce outside a host cell does. Although they are characteristics of viruses, they do not directly relate to their living or non-living nature.

To know more about viruses :

https://brainly.com/question/30056874

#SPJ11

which of the following events is not directly associated with inflammatory responses? which of the following events is not directly associated with inflammatory responses? antibody production phagocyte mobilization vasodilation increased vascular permeability

Answers

Antibody production is not directly associated with inflammatory responses. Antibody production is a part of the adaptive immune response and is a separate process from the immediate inflammatory response.

Antibody production is not directly associated with inflammatory responses. Antibody production is a part of the adaptive immune response and is a separate process from the immediate inflammatory response.
The event that is not directly associated with inflammatory responses among the given options is antibody production. Inflammatory responses typically involve phagocyte mobilization, vasodilation, and increased vascular permeability, while antibody production is a part of the adaptive immune system.

learn more about Antibody production

https://brainly.com/question/29730480

#SPJ11

Control of infectious disease falls into three categories. Classify the following types of disinfection, sanitation, and chemotherapy according to their associated control level. Chemotherapy prophylactic medicines when traveling Chemotherapy antibiotics administered to end infectivity Disinfection UV irradiation of a hospital room Sanitation pasteurization of milk and juices Sanitation regular restaurant inspections Reset
Eliminate Source Break Connections Decrease Susceptibility

Answers

Control of infectious diseases involves eliminating the source, breaking connections between sources and susceptible individuals, and decreasing an individual's susceptibility to infection.
Examples include using antibiotics, disinfection, sanitation measures like pasteurization, and taking prophylactic medicines when traveling.

Control of infectious disease falls into three categories: Eliminate Source, Break Connections, and Decrease Susceptibility. Here's the classification of the given examples according to their associated control level:

1. Eliminate Source:
- Chemotherapy antibiotics administered to end infectivity: This aims to eliminate the source of infection by treating the infected individual with antibiotics, effectively killing the pathogens and stopping their spread.

2. Break Connections:
- Disinfection UV irradiation of a hospital room: This method helps break the connections between potential sources of infection and susceptible individuals by using UV light to disinfect surfaces and air in a hospital room, reducing the risk of disease transmission.
- Sanitation pasteurization of milk and juices: Pasteurization is a process that involves heating liquids to a specific temperature to kill pathogens. This breaks the connection between the contaminated food source and the consumer, reducing the risk of disease transmission.
- Sanitation regular restaurant inspections: Regular inspections help to ensure that restaurants follow proper sanitation and hygiene practices, breaking the connection between contaminated food and the people consuming it.

3. Decrease Susceptibility:
- Chemotherapy prophylactic medicines when traveling: Prophylactic medicines are taken to prevent infections, decreasing an individual's susceptibility to certain diseases while traveling to areas where those diseases are prevalent.

To know more about "Pasteurization" refer here:

https://brainly.com/question/8747615#

#SPJ11

Organisms that can grow in habitats with low water activity by maintaining a high internal salt concentration are called __________ organisms.

Answers

Organisms that can grow in habitats with low water activity by maintaining a high internal salt concentration are called osmophilic organisms.

These organisms are adapted to environments where the availability of free water is limited, and they are able to survive by balancing their internal water content with high levels of salts or other solutes. Osmophilic organisms can be found in a variety of habitats, including deserts, salt flats, and brackish water. Examples of osmophilic organisms include certain species of bacteria, fungi, and algae.

These organisms have developed a range of mechanisms to cope with osmotic stress, such as accumulating compatible solutes like glycine betaine or trehalose, and producing enzymes that are resistant to high salt concentrations. Osmophilic organisms are important in various industries, including food preservation, as many of these organisms are able to grow in high salt environments that inhibit the growth of other spoilage organisms.

To know more about osmophilic visit:-

https://brainly.in/question/1732547

#SPJ11

The _____ is the smallest and least inclusive grouping in the seven levels of classification.

Answers

Answer:

Species is the smallest

Explanation:

The ________ secretes hormones that regulate the body's fluid levels.
a. adrenal
b. pituitary
c. testis
d. thyroid

Answers

The correct answer to the question is the pituitary gland. The pituitary gland is a small, bean-shaped gland located at the base of the brain.

It is often referred to as the "master gland" because it controls the functions of other endocrine glands in the body. The pituitary gland produces and secretes a variety of hormones that regulate different processes in the body, including growth and development, metabolism, and fluid balance.One of the hormones produced by the pituitary gland that helps regulate fluid balance is antidiuretic hormone (ADH), also known as vasopressin. ADH helps the kidneys reabsorb water from the urine and return it to the bloodstream, which helps maintain the body's fluid levels. If the body becomes dehydrated, the pituitary gland will produce more ADH to conserve water and prevent further fluid loss.Overall, hormones play a crucial role in regulating various processes in the body, including fluid balance. The pituitary gland is just one of many endocrine glands in the body that produces hormones to help maintain a healthy balance in the body.

Learn more about pituitary here

https://brainly.com/question/1372599

#SPJ11

An open system in which the growth rate is maintained by the removal and addition of media at such a rate as to maintain a constant cell density is called a
a. manostat.
b. chemostat
c. turbidostat.
d. culturostat.

Answers

The answer to your question is b. chemostat.

A chemostat (from chemical environment is static) is a bioreactor to which fresh medium is continuously added, while culture liquid containing left over nutrients, metabolic end products and microorganisms is continuously removed at the same rate to keep the culture volume constant.

The principle of chemostat culture is based on the relationship between the specific growth rate and a limiting nutrient concentration that regulates the growth rate in such a way that it matches a preset constant dilution rate.

a) Type I chemostat. (b) Type II chemostat. A mathematical model describing continuous microbial culture and harvest in a chemostat, incorporating a control strategy and defined by impulsive differential equations, is presented and investigated.

to know more about chemostat. click this link -

brainly.com/question/30507563

#SPJ11

In the sarcomere which elastic protein attaches the thick filament to the Z line?
a. titin
b. actin
c. G actin
d. nebulin
e. myosin

Answers

The correct answer is A, titin. Titin is a giant protein that spans half of the sarcomere, from the Z line to the M line. It acts as a molecular spring and provides elasticity to the sarcomere.

Titin is also known as connectin, as it connects the Z line to the M line, and helps to stabilize the thick filament in its central position. Nebulin, on the other hand, is an elongated protein that runs along the length of the thin filament, and acts as a ruler to determine the length of the actin filament. Actin and G actin are both proteins that make up the thin filament. Myosin is a protein that makes up the thick filament, and is responsible for the sliding of the filaments during muscle contraction.

To know more about elasticity

https://brainly.com/question/1048608

#SPJ11

Organisms that have their optimum growth pH between 8.5 and 11.5 are called __________.

Answers

Organisms that have their optimum growth pH between 8.5 and 11.5 are called alkaliphiles. Alkaliphilesare a type of extremophile that thrive in alkaline environments, which have a pH greater than 7.

These organisms are adapted to live in conditions that are typically inhospitable to most life forms, and they have evolved unique mechanisms to survive in these extreme environments. For example, alkaliphiles have specialized enzymes and transport proteins that function optimally at high pH levels.

They also have mechanisms to maintain a stable internal pH, despite the alkaline conditions in their surroundings. Some examples of alkaliphiles include certain species of bacteria, archaea, and fungi that are found in alkaline lakes, soda soils, and hydrothermal vents.

To know more about Organisms  visit:-

https://brainly.com/question/13278945

#SPJ11

The female true pelvis __________.
is bounded by the pubic arch, ischia, sacrum, and coccyx
defines the pelvic inlet
is inferior to the pelvic brim
is superior to the pelvic brim

Answers

The female true pelvis is bounded by the pubic arch, ischia, sacrum, and coccyx. It is a bony structure that is located below the false pelvis and above the pelvic floor.

The true pelvis defines the pelvic inlet, which is the opening at the top of the pelvis that connects it to the abdominal cavity. This inlet is wider in females than in males, and it is oval in shape. The female true pelvis is also inferior to the pelvic brim, which is the line that runs along the top of the pelvic bone. This means that the true pelvis is the portion of the pelvis that is closer to the perineum, where the genitals are located. The true pelvis is superior to the pelvic floor, which is a muscular layer that supports the organs in the pelvis, including the bladder, uterus, and rectum. In summary, the female true pelvis is a bony structure that is bounded by the pubic arch, ischia, sacrum, and coccyx, and it defines the pelvic inlet. It is located below the false pelvis and above the pelvic floor, and it is inferior to the pelvic brim.

Learn more about pelvic floor here:-

https://brainly.com/question/12993899

#SPJ11

Which of the following would be considered biologically important free radicals? Select all that apply
O2
NO2
NO

Answers

The biologically important free radicals are: NO (Nitric oxide). So the correct option is C.

NO (nitric oxide) is considered a biologically important free radical. It is a highly reactive molecule that acts as a signaling molecule in many physiological processes in the body, including regulation of blood vessel dilation, immune response, and neurotransmission. It is involved in various cellular signaling pathways and plays a role in regulating numerous physiological and pathological processes in the body.

O2 (oxygen) and NO2 (nitrogen dioxide) are not considered biologically important free radicals. Oxygen (O2) is a stable molecule that is essential for respiration and energy production in cells, while nitrogen dioxide (NO2) is a toxic air pollutant that can be harmful to human health when present in high concentrations. Free radicals are highly reactive molecules that have an unpaired electron, and they can damage cellular structures and biomolecules if not properly regulated by antioxidant systems in the body.

To know more about neurotransmission,

https://brainly.com/question/30336628

#SPJ11

Some bacteria have this additional gelatinous layer that surrounds the other wall layers and contributes to their ability to adhere to surfaces and to cause disease. What is this layer called?

Answers

The gelatinous layer that surrounds the other wall layers of some bacteria and contributes to their ability to adhere to surfaces and cause disease is called a capsule.

The capsule can help bacteria evade the immune system by inhibiting phagocytosis and complement activation. It also plays a role in biofilm formation, which can lead to persistent infections and antibiotic resistance.

A bacterial capsule is a gelatinous layer that surrounds the cell wall and contributes to the virulence of some bacterial species. It is composed of complex polysaccharides or sometimes polypeptides.

Capsules play an important role in bacterial pathogenesis, as they help the bacteria to evade the host's immune system by hindering phagocytosis, and also aid in adherence to surfaces.

To learn more about capsule, click here:

https://brainly.com/question/13020190

#SPJ11

An action potential involves Na+ moving ________ the cell and K+ moving ________ the cell.
a. inside; outside
b. outside; inside
c. inside; inside
d. outside; outside

Answers

The correct answer is a) inside; outside. An action potential is a brief electrical signal that travels along the membrane of a nerve cell or neuron.

It is initiated by a depolarization of the cell membrane, which occurs when positively charged ions, such as sodium (Na+), rush into the cell from outside. This influx of positive charge creates an electrical current that spreads along the membrane, depolarizing adjacent regions of the cell. As the action potential propagates along the membrane, the positively charged ions that entered the cell are actively pumped back out, while positively charged potassium (K+) ions move out of the cell and restore the resting membrane potential. This movement of ions across the membrane is crucial for the transmission of electrical signals in the nervous system and is an essential aspect of cellular function. The potential difference between the inside and outside of the cell is maintained by ion channels and ion pumps, which regulate the flow of ions in and out of the cell. Understanding the mechanisms of action potential generation and propagation is fundamental to understanding the nervous system and its many functions.

Learn more about neuron here

https://brainly.com/question/27274584

#SPJ11

A resolution of 1 μm would be better than a resolution of 0.5 μm.

Answers

A resolution of 1 μm would be better than a resolution of 0.5 μm. It depends on the specific application and requirements.

Resolution refers to the ability of a system to distinguish between two separate points or features. In general, a higher resolution means that smaller features can be resolved, leading to a clearer and more detailed image.

However, a higher resolution also requires more processing power and can result in longer imaging times.
Therefore, whether a resolution of 1 μm is better than a resolution of 0.5 μm depends on the specific needs of the application. If the application requires detailed imaging of small features, a resolution of 1 μm may be necessary. However, if the imaging time is a concern, a resolution of 0.5 μm may be sufficient.
In conclusion, the choice between a resolution of 1 μm and 0.5 μm depends on the specific application and its requirements. It is important to consider factors such as the required imaging detail and the available processing time when making this decision.

For more information on resolution kindly visit to

https://brainly.com/question/30675847

#SPJ11

When saccharomyces was prepared for the budding slides, the yeast was mixed with warm water and sugar. Why was sugar added?

Answers

Sugar was added to the Saccharomyces preparation because yeast requires sugar as a source of energy to undergo fermentation and produce carbon dioxide, which causes the yeast cells to bud.

Sugar was added to the saccharomyces when preparing for budding slides to provide a source of energy for the yeast cells. Yeasts are unicellular fungi that primarily rely on glucose as their energy source for cellular respiration. In the absence of a readily available carbon source, yeast cells can enter into a dormant state, which may affect their ability to undergo budding and reproduce.

By adding sugar to the water, the yeast cells have access to a readily available source of glucose, which they can metabolize to produce energy and carry out essential cellular processes, including budding.

Learn more about the saccharomyces at

https://brainly.com/question/14557159

#SPJ4

On the surface of the forearm from the center of the antecubital fossa to a point between the fourth and fifth fingers is the linear guide for the

Answers

On the surface of the forearm from the center of the antecubital fossa to a point between the fourth and fifth fingers is the linear guide for the median nerve.

The median nerve is a major nerve of the upper limb that provides sensation to the palm, thumb, index, and middle fingers, as well as controlling some muscles in the hand. The median nerve follows a specific path through the forearm, passing through the center of the antecubital fossa (the triangular depression in the elbow) and continuing down the arm to the hand. This path is referred to as the "linear guide" for the median nerve. By understanding the anatomy of this linear guide, healthcare professionals can use it as a reference point to assess and diagnose nerve-related disorders or injuries that may affect the function of the median nerve.

Learn more about median nerve here;

https://brainly.com/question/29533329

#SPJ11

You identify a new species of bacteria at the bottom of the ocean, but these organisms lack a site-specific recombination system. Which components would together allow for site-specific recombination to occur in these bacteria?
Check all that apply:
A. FRT target sites
B. flp recombinase
C cas9 enzyme
D. a loxP site
E. a synthetic homologous chromosome
F. spo11

Answers

To allow for site-specific recombination to occur in the identified bacteria that lack a site-specific recombination system, the following components would be required: A. FRT target sites

B. flp recombinase

D. a loxP site

Option C, Cas9 enzyme, is not relevant to site-specific recombination as it is a type of RNA-guided DNA endonuclease enzyme used in CRISPR gene editing.

Option E, a synthetic homologous chromosome, is not relevant to site-specific recombination as it refers to a man-made chromosome designed to be used in synthetic biology.

Option F, Spo11, is not relevant to site-specific recombination as it is a protein involved in meiotic recombination in eukaryotes, and not in site-specific recombination in bacteria.

Site-specific recombination is a genetic mechanism by which DNA molecules exchange or integrate at specific locations within a genome. This process is important for the regulation of gene expression, the control of DNA replication and repair, and the integration of foreign DNA into a host genome, among other functions.

In bacteria, site-specific recombination typically involves the recognition and binding of specific DNA sequences or target sites by recombinase enzymes. The recombinase enzymes then catalyze the exchange or integration of DNA molecules at the target sites, resulting in site-specific recombination.

The components required for site-specific recombination can vary depending on the specific system and organism involved. However, in general, site-specific recombination requires a recombinase enzyme that recognizes and binds to specific DNA sequences or target sites, as well as specific target sites or recognition sequences in the DNA molecule.

In the case of the identified bacteria at the bottom of the ocean that lack a site-specific recombination system, the introduction of components such as FRT target sites, flp recombinase, and a loxP site could allow for site-specific recombination to occur. These components would provide the necessary elements for the recognition and binding of specific DNA sequences or target sites, and the catalysis of DNA exchange or integration at these sites.

To know more about eukaryotes

brainly.com/question/29119623

#SPJ11

Activation of PKA is an important step in many signal transduction pathways. Which of the following are FALSE with respect to the activation/deactivation of PKA? Select one: a. When PKA has bound to its' regulatory subunit, it will not be able to act as a kinase. b. PKA is not phosphorylated itself but is able to add phosphates to many different proteins. c. PKA has the ability to autophosphorylate. d. cAMP is required to allow dissociation of the catalytic and regulatory subunits of inactive PKA and allowing the catalytic subunits to add phosphates to many different proteins.

Answers

Your answer: b. PKA has not phosphorylated itself but is able to add phosphates to many different proteins. This statement is FALSE because PKA can indeed autophosphorylate, which means it can add phosphates to itself in addition to other proteins.

The correct statement is:

a. When PKA has bound to its regulatory subunit, it is in an inactive state, but it can become active and act as a kinase once it is dissociated from the regulatory subunit.

b. PKA has not phosphorylated itself but is able to add phosphates to many different proteins. This is true, as PKA is a kinase that adds phosphate groups to other proteins, but it is not autophosphorylated.

c. PKA has the ability to autophosphorylate. This is false, as PKA is not autophosphorylated.

d. cAMP is required to allow dissociation of the catalytic and regulatory subunits of inactive PKA and allow the catalytic subunits to add phosphates to many different proteins. This is true, as cAMP binds to the regulatory subunit, causing the catalytic subunit to be released and become active as a kinase.

Learn more about autophosphorylate here:

https://brainly.com/question/31378759

#SPJ11

A paper company located on the banks of a river discharges its treated wastewater into the river. Which of the following would be the best control group to evaluate the treated wastewater from the paper company? - A sample of water downstream from the same river - A sample of water upstream from the same river - A sample of distilled water - A sample of water from a nearby river

Answers

The best control group to evaluate the treated wastewater from the paper company would be a sample of water upstream from the same river. This allows for a comparison between the water before it's affected by the company's wastewater discharge and the water after the discharge, giving you an accurate assessment of the impact of the treated wastewater on the river's water quality.

The best control group to evaluate the treated wastewater from the paper company would be a sample of water upstream from the same river. This is because it would provide a baseline for the natural state of the river and any changes or impacts from the discharged wastewater can be compared to it. A sample of water downstream from the same river would be affected by other sources of pollution and may not provide an accurate comparison. A sample of distilled water or water from a nearby river would not be relevant as they do not reflect the conditions of the river in question.

Learn more about upstream here:-

https://brainly.com/question/14158346

#SPJ11

A student places a zucchini cube into an open container containing a
0.50 M sucrose solution. The temperature of the solution is kept steady at
25°C.
Water potential: = ₂ + ₂
=pressure potential
=solute potential
=-iCRT
Solute potential of a solution: , =
i-ionization constant (1.0 for sucrose)
C=molar concentration
R= pressure constant (0.0831 L-bar-mol-K-¹)
T-temperature in Kelvin (C of solution +273)

What is the water potential of the zucchini cube?
A)12 bars
B)1.0 bars
C)-1.0 bars
D)-12 bars

Answers

The water potential of the zucchini cube is -12 bars.

therefore option D is correct

How do we calculate?

The solute potential of the sucrose solution is

Ψs = -iCRT

where i = ionization constant =  (1.0 for sucrose),

C=  molar concentration of the sucrose solution =  (0.50 M),

R = pressure constant =  (0.0831 L-bar-mol-K-1),

T=  temperature in Kelvin = (25°C + 273 = 298 K).

Ψs = -(1.0)(0.50 M)(0.0831 L-bar-mol-K-1)(298 K) = -12.4 bars

In conclusion, the water potential of the zucchini cube is:

Ψw = Ψs + Ψp = -12.4 bars + 0 bars = -12.4 bars

Learn more about  water potential at:

https://brainly.com/question/15690592\

#SPJ1

Limiting factors in a population

Answers

Answer: Predators and lack of food

Explanation: Predators hunt down prey and lack of food means the species will die off or find another food source.

Contained within the spongy sections of bones, red bone marrow is responsible for _____.

A. nutrient delivery

B. acid-base

C. movement

D. support

E. blood formation

F. communication

G. respiration

H. electrolyte balance

I. protection

Answers

Red bone marrow is responsible for blood formation. It produces red blood cells, white blood cells, and platelets, which are essential components of the circulatory and immune systems.

This process is known as hematopoiesis and occurs within the spongy sections of bones, such as the pelvis, sternum, and ribs. The red bone marrow contains stem cells that differentiate into the different types of blood cells, and these cells are then released into the bloodstream to perform their respective functions. This is a long answer, but it covers the importance and function of red bone marrow in the body.

The correct answer is:
E. blood formation

Red bone marrow is responsible for blood formation, specifically the production of red blood cells, white blood cells, and platelets. This process is known as hematopoiesis.

To know more about Red bone marrow visit:-

https://brainly.com/question/819753

#SPJ11

Organisms that ignore oxygen and grow equally well in its presence or absence are called
A. facultative anaerobes.
B. microaerophiles.
C. aerotolerant.
D. anoxygenic.

Answers

Answer:

A. Facultative anaerobes.

Why?

Facultative organisms can grow in the presence or absence of oxygen. Anaerobic bacteria such as the Clostridia are able to grow in the absence of oxygen and obligate anaerobes require its absence.

Hope this helps :)

Pls brainliest...

What are the two processes in which energy from nonliving sources is captured and stored in molecules that can be used by living things?

Answers

The two processes in which the energy from non living sources is captured and stored are photosynthesis and chemosynthesis.

Since plants need sunlight to produce food through a process called photosynthesis, the bulk of life on Earth is built on a food chain that revolves around the Sun.

The process of chemosynthesis, which is powered by chemical energy, is used by organisms to produce food in conditions without sunlight and consequently without plants.

Ecosystems are dependent on the capacity of some organisms to transform inorganic substances into food that other organisms can use or consume

All life on Earth is sustained by photosynthesis and chemosynthesis together.Everywhere there is enough sunshine, even on land, in shallow water, inside clear ice, and even in some bacteria and plants, photosynthesis takes place.

To convert carbon dioxide and water into sugar, all organisms that use photosynthetic processes rely on solar energy.

To know more about processes please check the following https://brainly.com/question/28419786

#SPJ4

Large-diameter, densely packed myofibrils, large glycogen reserves, and few mitochondria are characteristics of
a. fast fibers
b. fatty muscles
c. red muscles
d. intermediate fibers
e. slow fibers.

Answers

The correct answer is a. fast fibers. Fast fibers, also known as type II fibers, are characterized by large-diameter, densely packed myofibrils, large glycogen reserves, and few mitochondria. These fibers are responsible for generating quick, powerful contractions, but fatigue quickly due to their reliance on anaerobic metabolism.



The contrast, slow fibers, also known as type I fibers, have smaller diameters, more mitochondria, and higher concentrations of myoglobin, which allows for sustained aerobic metabolism. Red muscles, which are highly vascularized and contain a large number of mitochondria, are also associated with slow-twitch fibers. Intermediate fibers, as the name suggests, exhibit characteristics of both fast and slow fibers and are capable of both powerful, quick contractions and sustained activity. Fatty muscles, on the other hand, do not exist as a distinct muscle type but rather describe a state in which muscles have a high concentration of fat due to lack of exercise or poor diet. In summary, the presence of large-diameter, densely packed myofibrils, large glycogen reserves, and few mitochondria is indicative of fast fibers, which are responsible for generating quick bursts of power but fatigue quickly.

learn more about fast fibers here.

https://brainly.com/question/11478490

#SPJ11

Other Questions
Reviewing the record for deficiencies after the patient is discharged from the hospital is an example of what type of review? Which term refers to an attack conducted against a site with software that is vulnerable to aspecific exploit?time bombsadvanced persistent threatsspecific target attacktarget of opportunity attack 55 yo M presents with a rapidly progressive change in mental status, inability to concentrate, and memoryimpairment for the past two months. His symptoms are associated with myoclonus and ataxia. what the diagnosis? determine the time necessary for p dollars to doubl when it is invested at ineterest rate r compounded annually, monthly, daily, and continously, (round your answers to two decimal places.) Sarah is building a 10-foot-long pen for her pet rabbits. She wants to make gravel bases for two circular food containers to go inside the pen along with its width, as shown in the diagram. Let y represent the width of the pen and x represent the radii of the gravel bases and food containers. What system of inequalities can be used to determine the width of the pen, y, and the radii of the gravel bases, x? Mr. Weaver brings in a prescription for Welchol. You would update Mr. Weaver's profile with which medical condition? Blood clots Heart failure High cholesterol Irregular heart beat audits of publicly traded companies and privately held companies whose financial statements are expected to be widely distributed require an engagement Why was it necessary for the Second Continental Congress to outline the structure of government?1. It needed to explain how the government would work once independence from Britain was declared.2. It needed to have the power to create an army and house it during the War of Independence.3. It needed to have the power to raise taxes to pay for the effects of the War of Independence.4. It needed to explain what rights citizens would have in the new country. (E&E) E&E Refinery produces 3 types of gasoline: standard, midgrade, and premium by distilling from crude oil. Distilling 1 liter of crude oil can generate 0.5 liter of standard gasoline and 0.3 liter of midgrade gasoline. One liter of standard gasoline can be further processed into 1 liter of premium gasoline. The distillation of 1 liter of crude oil requires 1 machine hour and the cost of purchasing 1 liter of crude oil is 2 dollars ($2). It takes 3 additional machine hours and $2 to process 1 liter of standard gasoline into 1 liter of premium gasoline. Standard gasoline can be sold at the price of $4 per liter and midgrade gasoline can be sold at the price of $6 per liter. The price for premium gasoline is $10 per liter. Each week, E&E Refinery has 4,000 machine hours available and can purchase up to 3,000 liter of crude oil. The goal is to maximize the weekly profit. Formulate a math model for the problem using the following decision variables defined: XC denote the number of liters of crude oil used per week, XS denote the number of liters of standard gasoline produced per week after deducting the amount used to produce premium gasoline, XM denote the number of liters of midgrade gasoline produced per week, and XP denote the number of liters of premium gasoline produced per week2. Fill in the blanks (E&E) Use Excel solver to obtain the optimal solution for this problem and the maximum profit. Please provide numerical answers without dollar sign. Moreover, if the answer is an integer, please answer it without decimal places. Otherwise, provide the answer to 2 decimal placesThe maximum profit is ?XC =?XS =?XM =?XP = ?3. (E&E) The company has two options for procuring extra resources. Option 1 is to buy at least 1,500 liters of crude oil at the same cost of purchasing 1 liter of crude oil $2 dollars from another supplier. Option 2 is to rent a new machine which will provide additional 3,500 machine hours at a weekly cost of $4,500. Which option is better for the company? Please explain your reasons for your option. Partial differential equation Using the characteristic (integration constant) find the solution to x . u (x.y)/x + y . u(x,y)/y = 0with the boundary condition (1, y) = y how many seconds are required to deposit grams of cadmium metal from a solution that contains ions, if a current of 0.769 a is applied. s Match the following food acquisition behaviors to the hominin tool type or technology most likely used to carry it out.Chipped Stone Tool Flakes: cutting meat or other foodsCobbles or Choppers: smashing bone to access marrowSouth African Bone Tools: digging into termite mounds or digging for roots You have recently setup a daily team stand-up. For the first few days, the stand-ups were flowing smoothly, until today when a number of issues have been reported by the team. What should be done next? Date: Practise Section 7.2 1. Find the greatest common factor (GCF) of a) 64 and 72 b) 2a2 and 12a c) 4x2 and 6x 2. For each polynomial, indicate if it is in the factored form or expanded form and identify greatest common factor. a) 3x - 12 b) 5(13y - x) c) 3x2 12x + 9 - GCF = GCF = GCF = 3. Completely factor each polynomial and check by expanding a) 3p - 15 b) 21x2 - 9x + 18 c) 6y2 + 18y + 30 = 3( - ) Check: Check: Check: 4. Write a trinomial expression with a GCF of 3n. Factor the expression. determine the alkalinity (in mg/l as caco 3 ) of a water sample at ph 6.8 containing 10 mg/l co 32- and 75 mg/l of hco 3- . What was the role of government in Russia regarding technology and engineering before the Soviet Union and after its coming according to Graham? How does this contrast with Burke's portrayal of government regulation of technology in the United States? casey transfers property with a tax basis of $3,000 and a fair market value of $7,100 to a corporation in exchange for stock with a fair market value of $6,000 and $430 in cash in a transaction that qualifies for deferral under section 351. the corporation assumed a liability of $670 on the property transferred. casey also incurred selling expenses of $562. what is the amount realized by casey in the exchange? orbital diagram for phosphorus 3- ion What literary device does Emily Dickinson use in the poem wild nights ? Plum Corporation began the month of May with $1,100,000 of current assets, a current ratio of 2.60:1, andan acid-test ratio of 1.60:1. During the month, it completed the following transactions (the company usesa perpetual inventory system).May 2 Purchased $75,000 of merchandise inventory on credit.8 Sold merchandise inventory that cost $60,000 for $160,000 cash.10 Collected $24,000 cash on an account receivable.15 Paid $24,000 cash to settle an account payable.17 Wrote off a $5,000 bad debt against the Allowance for Doubtful Accounts account.22 Declared a $1 per share cash dividend on its 55,000 shares of outstanding common stock.26 Paid the dividend declared on May 22.27 Borrowed $125,000 cash by giving the bank a 30-day, 10% note.28 Borrowed $140,000 cash by signing a long-term secured note.29 Used the $265,000 cash proceeds from the notes to buy new machinery.