Find The Values Of X and Y

Both Andre and Elena are correct, but they have used different properties of exponents to simplify the expression.

Andre used the property that when multiplying powers with the same base, the exponents can be added. So, he added the exponents of 10^2, which is 2, to get 2+2+2 = 6. Therefore, his answer of 10^6 is correct.

Elena used the property that when a power is raised to another power, we can multiply the exponents. So, she rewrote 10^2 • 10^2 • 10^2 as (10^2)^3, and then multiplied the exponents of 10^2, which is 2, by 3 to get 2*3 = 6. Therefore, her answer of 10^5 is also correct.

Both methods are valid and result in the same answer, so it's a matter of personal preference which method to use.

More on exponents and power can be found here: https://brainly.com/question/15722035

#SPJ1

The number of terms in the expansion of the expression[tex][(3x^2y)^2(3x-2y)^2]^3[/tex] after it is simplified to lowest terms is the product of the number of terms in the base and the number of terms in the exponent,

which is:

[tex]1 \times 7 = \boxed{7}[/tex]

The expression [tex][(3x^2y)^2(3x-2y)^2]^3[/tex]by using the laws of exponents and expanding the products of powers.

First, we can simplify the term inside the square brackets:

[tex](3x^2y)^2(3x-2y)^2 = 9x^4y^2 (3x-2y)^2[/tex]

Expanding the square of [tex](3x-2y)^2[/tex] gives:

[tex](3x-2y)^2 = (3x)^2 - 2(3x)(2y) + (2y)^2 = 9x^2 - 12xy + 4y^2[/tex]

Substituting this back into the expression gives:

[tex]$[(3x^2y)^2(3x-2y)^2]^3 = (9x^4y^2)(9x^2 - 12xy + 4y^2)^2]^3[/tex]

Expanding the cube of the expression gives:

[tex]$[(9x^4y^2)(9x^2 - 12xy + 4y^2)^2]^3 = (9x^4y^2)^3(9x^2 - 12xy + 4y^2)^6$[/tex]

The expression has only one term, which is the product of two terms raised to a power.

To determine the number of terms in the expansion, we need to expand the binomial. [tex](9x^2 - 12xy + 4y^2)^6[/tex]

Using the binomial theorem,

The expansion will have 7 terms, since the exponents on [tex]9x^2, -12xy, and 4y^2[/tex]will range from 6 to 0, and the sum of the exponents will always be 6.

For similar questions on lowest terms

https://brainly.com/question/9835673

#SPJ11

Answer:

No, they are not equivalent expressions.

Step-by-step explanation:

2(x + 6) + x = 2x + 12 + x = 3x + 12.

3x + 6 = 3x + 6.

The two expressions are not equal because they have different coefficients of x and different constant terms.

TRUST WEB ACCEPTED

The length of the pendulum rod (L) can be calculated using the formula L = g/(4π²f²) and the length of the rod between the two weights at a tempo of 192 bpm is approximately 0.101 meters.

Starting with the equation

f = √(g/L)/(2π)

Squaring both sides, we get

f² = g/L(4π²)

Rearranging, we get

L = g/(4π²f²) ------ (1)

Therefore, the length of the pendulum rod (L) can be calculated using the formula L = g/(4π²f²).

Given, f = 1.6 Hz, which means there are 2 beats per second or 120 beats per minute (bpm).

Using the formula in equation (1)

L = g/(4π²f²)

L = 9.8/(4π²(1.6)²)

L = 0.101 meters (rounded to three decimal places)

Therefore, the length of the rod between the two weights at a tempo of 192 bpm is approximately 0.101 meters.

To know more about length here

https://brainly.com/question/9112078

#SPJ4

the guy wires are 850 feet long. We can use the Pythagorean theorem to solve this problem.

what is Pythagorean theorem  ?

The Pythagorean theorem is a mathematical concept that describes the relationship between the sides of a right triangle. It states that in any right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides.

In the given question,

We can use the Pythagorean theorem to solve this problem. The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse (the longest side) is equal to the sum of the squares of the lengths of the other two sides.

In this case, the tower, the guy wires, and the ground form a right triangle. Let's call the length of the guy wires "x". Then we can set up the following equation:

x² = 840² + (130)²

Simplifying and solving for x, we get:

x² = 705600 + 16900

x² = 722500

x = √722500

x = 850

Therefore, the guy wires are 850 feet long.

To know more about Pythagorean theorem , visit:

https://brainly.com/question/14930619

#SPJ1

The function f is onto.

To determine if the function f is one-to-one, we need to check if each element in the domain maps to a unique element in the range. Looking at the function, we can see that f(a) = 1, f(b) = 2, f(c) = 3, and f(d) = 3. Since two elements in the domain (c and d) map to the same element in the range (3), the function f is not one-to-one.

To determine if the function f is onto, we need to check if every element in the range is mapped to by at least one element in the domain. Looking at the function, we can see that all four elements in the range (1, 2, 3, and 4) are mapped to by at least one element in the domain. Therefore, the function f is onto.

Learn more about onto functions here: brainly.com/question/31400068

#SPJ11

Fred should use a critical value of 2.145 and a standard error of the mean of 2.84 to construct a 95% confidence interval for the average length of movies he watches

To construct a confidence interval for the population mean length of movies watched by Fred, we can use the following formula

Confidence interval = sample mean +/- (critical value) x (standard error)

where the standard error of the mean (SE) is calculated as:

SE = sample standard deviation / sqrt(sample size)

Since Fred's sample size is 15 and he wants a 95% confidence interval, we need to find the critical value for a t-distribution with 14 degrees of freedom (n-1), which can be obtained from a t-distribution table or calculator.

Using a t-distribution calculator with 14 degrees of freedom and a 95% confidence level, we find the critical value to be 2.145.

Next, we can calculate the standard error of the mean as

SE = 11 / sqrt(15) = 2.84

Learn more about confidence interval here

brainly.com/question/29680703

#SPJ4

The statement "Some twins are sisters. All twins are siblings. Therefore, some siblings are sisters" is true.

Usually an illustration of a substantial deductive contention in which the conclusion takes coherently from the premises.

The primary introduction states that a few twins are sisters, which suggests that they are female twins. The moment preface states that all twins are kin, which implies that they are related by blood.

In this manner, on the off chance that a few twins are sisters and all twins are kin, it consistently takes after that a few kin are sisters.

It is imperative to note that the conclusion isn't essentially genuine for all kin, as a few kin may be brothers or mixed-gender twins. Be that as it may, the contention is still consistently substantial since the conclusion takes after coherently from the premises 

To know more about twins refer to this :

https://brainly.com/question/986349

#SPJ4

The slope of the rope is 0.25 with the respective situation as the rope is attached to 6-foot high wall and the horizontal distance is 24 feet.

We need to determine the ratio of the vertical change to the horizontal change to establish the slope of the rope's line. To begin, we may use the Pythagorean theorem to calculate the length of the rope:

a² + b² = c²

where an is the height of the wall, b is the horizontal distance from the wall to the point where the rope is tied to the ground, and c is the length of the rope.

When we solve for c, we get:

c = √(6² + 24²)

c = √(36 + 576)

c = √612

c = around 24.73 feet

Consider a right triangle created by the wall, the point where the rope is fastened to the ground, and a point on the rope directly above the wall's top.

The vertical change is the wall's height, which is 6 feet.

The horizontal change is the distance of 24 feet between the place where the rope is tied to the ground and the wall.

As a result, the slope of the rope-representing line is:

vertical change / horizontal change = slope

slope = 6 / 24

slope = 0.25

As a result, the slope of the rope's line is 0.25.

Learn more about Slope of a line:

https://brainly.com/question/29044610

#SPJ4

Solving the right triangle, the measures are:

Ange A = 50°; side a ≈ 31.0; side c ≈ 40.4

A right triangle is a type of triangle that has one of its angles measuring 90 degrees (a right angle). The side opposite the right angle is called the hypotenuse, while the other two sides are called the legs.

To solve the right triangle, apply the Trigonometry ratios like the SOHCAHTOA.

Angle A = 180 - 90 - 40

Ange A = 50°

To find side a, apply the tangent ratio (TOA):

tan ∅ = opp./adj.

tan 40 = 26/a

a = 26/tan 40

a ≈ 31.0

To find c, apply the sine ratio (SOH):

sin 40 = 26/c

c = 26/sin 40

c ≈ 40.4

Learn more about the right triangle on:

https://brainly.com/question/1248322

#SPJ1

If the area of a kite is 35cm square, the area of the new kite with all diagonals multiplied by 2 is 70 cm².

If we multiply all the diagonals of a kite by 2, then the area of the new kite will be 4 times the area of the original kite.

The area of a kite is given by the formula:

Area = (diagonal 1 x diagonal 2)/2

Let the diagonals of the original kite be d1 and d2. Then, the area of the original kite can be expressed as:

Area = (d1 x d2)/2 = 35 cm²

If we multiply all the diagonals of the original kite by 2, then the new diagonals will be 2d1 and 2d2. The area of the new kite can be expressed as:

New area = (2d1 x 2d2)/2 = 2d1d2

Substituting the value of d1d2 from the original equation, we get:

New area = 2d1d2 = 2 x (d1 x d2) = 2 x Area = 2 x 35 cm² = 70 cm²

To learn more about kite click on,

https://brainly.com/question/31506724

#SPJ4

The side length x of the triangle to the nearest tenth is 170.3

The figures in the image are right-triangle.

From the diagram:

Angle θ = 20°

Opposite to angle θ = 62

Adjacent to angle θ = x

To find the value of x, we use the trigonometric ratio.

Note that: tangent = opposite / adjacent

Plug in the values

tan( 20 ) = 62 / x

Solve for x

x = 62 / tan( 20 )

x = 170.3

Therefore, the measure of side length labelled x is 170.3 units.

Learn more about trigonometric ratio here: brainly.com/question/28016662

#SPJ1

Answer:

Step-by-step explanation:

we find the area of ​​the rectangle with the formula WxL

7 x 4 = 28 m^2

we find the area of ​​the triangle with the formula 1/2 b x h

1/2 7 x 4 =

3.5 x 4 = 14 m^2

we add the two areas

28 + 14 = 42m^2   (your answer)

Rotate triangle △C'D'E' counterclockwise by approximately -0.785 radians about the origin:

[tex]x1' = 1 \times cos(-0.785) - (-4) \times sin(-0.785) \approx 0.436[/tex]

[tex]y1' = 1 \times sin(-0.785) + (-4) \times cos(-0.785) \approx -3.678[/tex]

[tex]x2' = -7 \times cos(-0.785) - 8[/tex]

The given point [tex]s C(2, -8), D(-6, 4),[/tex] and [tex]E(0, 4)[/tex] form the triangle △CDE, and the points U(1, -4), V(-3, 2), and W(0, 2) form the triangle △UVW, with △CDE being the preimage of △UVW.

To represent the transformation algebraically, we can use a combination of translations and rotations.

Translation:

To translate a point (x, y) by a vector (h, k), we add h to the x-coordinate and k to the y-coordinate of the point.

To transform triangle △CDE to triangle △UVW, we can first translate triangle △CDE by a vector (h, k) to obtain triangle △C'D'E', where C' = C + (h, k), D' = D + (h, k), and E' = E + (h, k).

Since the coordinates of C are (2, -8) and the coordinates of U are (1, -4), we can calculate the translation vector (h, k) as follows:

[tex]h = 1 - 2 = -1[/tex]

[tex]k = -4 - (-8) = 4[/tex]

So the translation vector is [tex](-1, 4).[/tex]

Rotation:

To rotate a point (x, y) by an angle θ counterclockwise about the origin, we use the following formulas:

[tex]x' = x \times \cos(\theta) - y times \sin(\theta)[/tex]

[tex]y' = x \times \sin(\theta) + y \times \cos(\theta)[/tex]

To transform triangle △C'D'E' to triangle △UVW, we can apply a rotation of angle θ counterclockwise about the origin to triangle △C'D'E', where C' = (x1', y1'), D' = (x2', y2'), and E' = (x3', y3'). Since the coordinates of C' are (2, -8) after translation, and the coordinates of U are (1, -4), we can calculate the rotation angle θ as follows:

[tex]\theta = atan2(y1' - y2', x1' - x2') - atan2(y1 - y2, x1 - x2)= atan2((-8 + 4) - (-4), (2 + 1) - (-6 + 3)) - atan2((-8) - (-4), 2 - (-6))[/tex]

Using a calculator, we can find θ to be approximately -0.785 radians.

So, the algebraic representation of the transformation that maps triangle [tex]\triangle CDE[/tex] to triangle [tex]\triangle UVW[/tex]  is:

Translate triangle △CDE by the vector (-1, 4) to obtain triangle △C'D'E':

[tex]C' = (2, -8) + (-1, 4) = (1, -4)[/tex]

[tex]D' = (-6, 4) + (-1, 4) = (-7, 8)[/tex]

[tex]E' = (0, 4) + (-1, 4) = (-1, 8)[/tex]

Therefore, Rotate triangle △C'D'E' counterclockwise by approximately -0.785 radians about the origin:

[tex]x1' = 1 \times cos(-0.785) - (-4) \times sin(-0.785) \approx 0.436[/tex]

[tex]y1' = 1 \times sin(-0.785) + (-4) \times cos(-0.785) \approx -3.678[/tex]

[tex]x2' = -7 \times cos(-0.785) - 8[/tex]

Learn more about coordinate here:

https://brainly.com/question/16634867

#SPJ1

By performing these statistical computations, you can analyze and interpret the central tendency of your dataset, which helps in understanding the overall pattern and distribution of the data.

It looks like you're seeking information on further statistical computation related to mean, mode, and median.

To calculate the mean, mode, and median of a dataset, follow these steps:

1. Mean: The mean is the average of all data points in a dataset.
  - Step 1: Add up all the data points.
  - Step 2: Divide the sum by the total number of data points.

2. Mode: The mode is the data point that occurs most frequently in a dataset.
  - Step 1: Count the frequency of each data point.
  - Step 2: Identify the data point(s) with the highest frequency.

3. Median: The median is the middle value in a dataset when the data points are arranged in ascending order.
  - Step 1: Arrange the data points in ascending order.
  - Step 2: If there is an odd number of data points, the median is the middle value. If there is an even number of data points, the median is the average of the two middle values.

By performing these statistical computations, you can analyze and interpret the central tendency of your dataset, which helps in understanding the overall pattern and distribution of the data.

to learn more about statistical click here:

https://brainly.com/question/20483125

#SPJ11

a. The most typical case is desired: Mode. The mode is a useful measure of central tendency when the most typical or common value is of relevance since it denotes the value or category that occurs most frequently in a data collection.

b. The distribution is open-ended: Median. The median is the middle value in a data set when arranged in ascending or descending order. It is a suitable measure of central tendency when the distribution is open-ended or skewed, as it is less affected by extreme values compared to the mean.

c. The data collection has an extreme value: the median. The median is less sensitive to extreme values compared to the mean, making it a better measure of central tendency in data sets with extreme values or outliers.

d. The data are categorical: Mode. The mode is appropriate for categorical data, as it represents the most frequently occurring category or value in the data set.

e. Further statistical computations will be needed: This statement does not indicate a specific measure of central tendency. Further statistical computations may be needed to determine the appropriate measure of central tendency depending on the characteristics of the data and the specific objectives of the analysis.

f. The numbers should be split into two roughly equal groups, one of which should contain the higher values and the other should contain the smaller values: Median.  The median is the value that separates a data set into two equal halves, making it suitable for dividing data into two approximately equal groups based on their values.

Learn more about “  mean, median, or mode “ visit here;

https://brainly.com/question/30891252

#SPJ4

COMPLETE QUESTION-

For these situations, state which measure of central tendency - mean, median, or mode-should be used.

a. The most typical case is desired.

b. The distribution is open-ended.

c. There is an extreme value in the data set.

d. The data are categorical.

e. Further statistical computations will be needed.

f. The values are to be divided into two approximately equal groups, one group containing the larger values and one containing the smaller values.

The conditions will the linear equations have no solutions, one solution, infinitely many solutions are specified by variables and their coefficient matrix and states if the system is consistent or inconsistent.

Let us assume simple equations:

ax + by = c

ex + fy = g

Here a, b, c, e, f, and g are constants.

The different conditions are determined as:

1. No solutions: It is represented by D, If the determinant of the coefficient matrix is zero and the procedure is inconsistent, then we can assume that the system has no solutions.

2. One solution: If the coefficient matrix of any system is non-zero, then the system has one solution.

3. Infinitely many solutions: If the system is Consistent and the determinant of the coefficient matrix is zero, then the system has  Infinitely many solutions.

To learn more about Linear Equations,

https://brainly.com/question/14473457

#SPJ4

Answer:

[tex]\large\boxed{\tt x \approx 95.6}[/tex]

Step-by-step explanation:

[tex]\textsf{We are asked to solve for x by using \underline{Trigonometric Identities}.}[/tex]

[tex]\large\underline{\textsf{What are Trigonometric Identities?}}[/tex]

[tex]\boxed{\begin{minipage}{20 em} \\ \underline{\textsf{\large Trigonometric Identities;}} \\ \\ \textsf{Trigonometric Identities are trigonometric ratios determined with what's given in order to find a missing value. For a Right Triangle, the Trigonometric Identities are Sine, Cosine, and Tangent. These are used to find missing sides.} \\ \\ \tt Sine = \tt $ \tt \frac{Opposite}{Hypotenuse} \\ \\ Cosine = \frac{Adjacent}{Hypotenuse} \\ \\ Tangent = \frac{Opposite}{Adjacent} \end{minipage}}[/tex]

[tex]\textsf{We should determine whether Sine, Cosine, or Tangent will actually help us}[/tex]

[tex]\textsf{determine x. We are given a Right Triangle that has 1 15}^{\circ} \ \textsf{angle, and a side with}[/tex]

[tex]\textsf{a length of 99. Because this side is opposite of the right angle, this side is called}[/tex]

[tex]\textsf{the \underline{Hypotenuse}.}[/tex]

[tex]\textsf{The side labeled x is \underline{Adjacent}, which means that it's touching the given angle.}[/tex]

[tex]\textsf{Using what was given to us, we should use Cosine since we are asked for the}[/tex]

[tex]\textsf{Adjacent Angle when given the Hypotenuse.}[/tex]

[tex]\large\underline{\textsf{Solving;}}[/tex]

[tex]\textsf{Remember that;}[/tex]

[tex]\tt \cos(15^{\circ}) =\frac{Adjacent}{Hypotenuse}[/tex]

[tex]\textsf{We're given;}[/tex]

[tex]\tt \cos(15^{\circ}) =\frac{x}{99}[/tex]

[tex]\textsf{To find the value of x, we first should remove the fraction using cancellation.}[/tex]

[tex]\textsf{We are able to use the \underline{Multiplication Property of Equality} to prove that the}[/tex]

[tex]\textsf{equation remains equal.}[/tex]

[tex]\underline{\textsf{Multiply both expressions by 99;}}[/tex]

[tex]\tt 99 \cos(15^{\circ}) =\not{99} \frac{x}{\not{99}}[/tex]

[tex]\tt 99 \cos(15^{\circ}) =x[/tex]

[tex]\underline{\textsf{Evaluate;}}[/tex]

[tex]\tt 99 \cos(15^{\circ}) \approx \boxed{\tt 95.6}[/tex]

[tex]\large\boxed{\tt x \approx 95.6}[/tex]

The slope =2 and y-intercept = -3.

What is slope?

Calculated using the slope of a line formula, the ratio of "vertical change" to "horizontal change" between two different locations on a line is determined. The difference between the line's y and x coordinate changes is known as the slope of the line.Any two distinct places along the line can be used to determine the slope of any line.

Here let us take two points [tex](x_1,y_1)=(1.5,0) , (x_2,y_2)=(0,3)[/tex] .

Now using slope formula then,

Slope m = [tex]\frac{y_2-y_1}{x_2-x_1}[/tex]

=> m = [tex]\frac{3-0}{0-1.5} = \frac{3}{-1.5}=2[/tex]

Now using equation formula then,

=> [tex]y-y_1=m(x-x_1)[/tex]

=> y-0=2(x-1.5)

=> y = 2x-3

Here y=mx+b, where b= y-intercept.

Hence slope =2 and y-intercept = -3.

To learn more about slope refer the below link

https://brainly.com/question/16949303

#SPJ1

The probability for the binomial random variable X are,

Expression and value P(X = 6) is (²⁰C₆)(0.3)^6 (0.7)^20-6 and 0.1916.

Probability for P(X<6) is equal to 0.8084.

Upper bound for P(X<6) is P(X =5) and upper bound for normal approximation is one value less than the given value.

In the binomial random variable,

n = 20

p =0.3

(1 - p ) = 1 - 0.3

          = 0.7

Using the formula we have,

(ⁿCₓ)(p)^x (1-p)^n-x

For X= 6

Expression for P( X =6 ) is equal to,

(²⁰C₆)(0.3)^6 (0.7)^20-6

=  (38760) × 0.000729 × 0.00678223072

=0.1916

Probability of P(X<6)

= P(X=0) +  P(X=1)+ P(X=2)+ P(X=3)+ P(X=4)+ P(X=5)

= 1 - P(X =6 )

= 1 - 0.1916

=0.8084

Upper bound for above part is X= 5 as it is one less than 6.

Normal approximation could choose a different upper bound based on accuracy .

Choose the upper bound to be one less than the required value .

Therefore, the probability for the given binomial random variable is ,

P(X = 6) is (²⁰C₆)(0.3)^6 (0.7)^20-6 and value of P(X =6) = 0.1916

P(X<6) =0.8084.

Upper bound is P(X =5) when probability is P(X =6).

Yes ,we choose different upper bound normal approximation as upper bound is one less than the value.

Learn more about probability here

brainly.com/question/31297775

#SPJ4

The above question is incomplete, the complete question is:

Let X be a binomial random variable with n = 20 and p = .3.

A. Write the expression for P(X = 6) in terms of the formula (n/x)(p)^x (1-p)^n-x , then evaluate it using your calculator.

B. Using probability notation, P(X = x), write out all the probabilities you'd need to add up in order to calculate P(X < 6), and then evaluate it using your calculator.

C. For part B, why did you choose the upper bound that you did? If you were using the normal approximation could you choose a different upper bound? Why or why not?

There are 4,320 ways to select six of the letters of the word algorithm and write them in a row if the first letter must be "a".

There are 7 letters in the word "algorithm", and we need to select 6 of them and arrange them in a row such that the first letter is "a". We can first choose the remaining 5 letters from the remaining 6 letters (excluding "a") in 6 choose 5 ways

⁶C₅ = 6!/5! = 6

Once we have chosen the 5 letters, we can arrange the 6 selected letters (including "a") in a row in 6! ways. Therefore, the total number of ways to select 6 letters and arrange them in a row with the first letter being "a" is

⁶C₅ × 6! = 6 × 720 = 4,320

To know more about select here

https://brainly.com/question/29485987

#SPJ4

In the given triangle the 3 trigonometric ratios are:

(A) Sinθ = 3/5, (B) Cosθ = 4/5, and (Tanθ = 3/4)

The trigonometric functions in mathematics are real functions that connect the right-angled triangle's angle to the ratios of its two side lengths.

They are extensively employed in all fields of geometry-related study, including geodesy, solid mechanics, celestial mechanics, and many others.

In general, arcsine, arccosine, tangent, cotangent, secant, and cosecant functions are used to express the inverses of sine, cosine, tangent, cotangent, secant, and cosecant functions.

So, according to t the given triangle, the 3 trigonometric ratios would be:

Sinθ = B/H

Sinθ = 27/45

Sinθ = 3/5

Cosθ = P/H

Cosθ = 36/45

Cosθ = 4/5

Tanθ = B/P

Tanθ = 27/36

Tanθ = 3/4

Therefore, in the given triangle the 3 trigonometric ratios are:

(A) Sinθ = 3/5, (B) Cosθ = 4/5, and (Tanθ = 3/4)

Know more about trigonometric ratios here:

https://brainly.com/question/24349828

#SPJ1

(a) The correct trigonometric ratio to use is the tangent ratio (tan).

(b) The trigonometric equation is tan(17°) = Opposite/Adjacent.

(c) tan(17°) = Opposite/Adjacent

tan(17°) = 150/Adjacent

Adjacent = 150/tan(17°)

Adjacent = 150/0.3045

The directionality of the alternative hypothesis and the support offered by the sample data determine whether the null hypothesis is likewise rejected at the 5% level of significance for a related one-tailed test.

When the two-tailed test rejects the null hypothesis, it means that the sample data, regardless of how we look at it, support the null hypothesis.. A one-tailed test, however, simply considers the evidence in one way. As a result, the null hypothesis should be used if the sample data only show evidence that the alternative hypothesis is true in one direction (for example, greater than).

To know more about Null hypothesis, visit,

https://brainly.com/question/4436370

#SPJ4

The two tangent theorem can be used to find the required equations and  the lengths of the of the segments and tangents as follows;

4. 6x - 16 = 4x - 10

5. x = 13

6. 10y - 3 = 7y + 21

7. y = 8

8. GK = 139
9. GZ = 77

10. ZL = 62

The two tangent theorem states that intersecting tangent segments from the point of the intersection to the circle are congruent.

The two tangent theorem indicates;

PZ = GZ, and ZK = ZL

Therefore;

4. An equation that can be used to solve for x can be obtained from the equation formed using the two tangent theorem and plugging in the value of ZK and ZL in the equation; ZK = ZL

The equation is therefore; 6·x - 16 = 4·x + 10

5. 6·x - 16 = 4·x + 10

6·x - 4·x = 10 + 16 = 26

2·x = 26

x = 13

6. The equation that can be used to solve for y can be obtained from the equation PZ = GZ, by plugging in the values of PZ and GZ in the equation as follows;

10·y - 3 = 7·y + 21

7. 10·y - 3 = 7·y + 21

10·y - 7·y = 21 + 3 = 24

3·y = 24

y = 24/3 = 8

y = 8

8. GK = GZ + ZK

Therefore; GK = 7·y + 21 + 6·x - 16

GK = 7 × 8 + 21 + 6 × 13 - 16 = 139

GK = 139

9. GZ = 7·y + 21 = 7 × 8 + 21 = 77

GZ = 77

10. ZL = 4·x + 10

Therefore; ZL = 4 × 13 + 10 = 62

ZL = 62

Learn more on circle theorems here: https://brainly.com/question/28699728

#SPJ1

The radius of the circle with the given chord length is: radius = 7.25

The Radius of a Circle based on the Chord and Arc Height helps us to computes the radius based on the chord length (L) and height (h).

The formula for the radius of a circle based on the length of a chord and the height is:

r = (L²/8h) + (h/2)

where:

r is the radius of a circle

L is the length of the chord.  This is the straight line length connecting any two points on a circle.

h is the height above the chord.  This is the greatest distance from a point on the circle and the chord line.

We are given:

L = 5 + 5 = 10

h = 2

Thus:

r = (10²/8(2)) + (2/2)

r = 6.25 + 1

r = 7.25

Read more about radius at: https://brainly.com/question/30804688

#SPJ1

The table is a scale drawing because there is a proportional relationship between the drawing length and the actual length.

A dilation can be defined as a transformation that multiplies the distance between every point in an object and a fixed point, called the center of dilation, by a constant factor called the scale factor.

When two figures are dilation of each other, it is said that they represent a scale drawing.

The scale factor for the dilation in this problem is given as follows:

k = 5.

Hence the table forms a proportional relationship.

More can be learned about dilation at brainly.com/question/3457976

#SPJ1

To make the expression a perfect square trinomial, we need to add and subtract the square of half of the coefficient of k. In this case, the coefficient of k is -3. Half of -3 is -3/2. The square of -3/2 is 9/4. Therefore, we can add and subtract 9/4 to the expression as follows:

Now we can write this as a perfect square trinomial:

The missing angles of the diagram are:

∠1 = 118°

∠2 = 62°

∠3 = 118°

∠4 = 30°

∠5 = 32°

∠6 = 118°

∠7 = 30°

∠8 = 118°

Supplementary angles are defined as two angles that sum up to 180 degrees. Thus:

∠1 + 62° = 180°

∠1 = 180 - 62

∠1 = 118°

Now, opposite angles are congruent and ∠2 is an opposite angle to 62°. Thus: ∠2 = 62°.

Similarly: ∠3 = 118° because it is congruent to ∠1

Alternate angles are congruent and ∠5 is an alternate angle to 32°. Thus:

∠5 = 32°

Sum of angle 4 and 5 is a corresponding angle to ∠2 . Thus:

∠4 + ∠5 = 62

∠4 + 32 = 62

∠4 = 30°

This is an alternate angle to ∠7 and as such ∠7 = 30°

Sum of angles on a straight line is 180 degrees and as such:

∠8 = 180 - (30 + 32)

∠8 = 118° = ∠6 because they are alternate angles

Read more about Missing Angles at: https://brainly.com/question/28293784

#SPJ1

Answer: This situation involves choosing a group of 5 players out of a total of 12 players, where the order in which the players are chosen does not matter. Therefore, this is an example of a combination problem.

The number of ways to choose a group of 5 players out of 12 is given by the formula for combinations:

n C r = n! / (r! * (n-r)!)

where n is the total number of players, r is the number of players being chosen, and "!" represents the factorial operation.

In this case, we have n = 12 and r = 5, so the number of different choices of starters is:

12 C 5 = 12! / (5! * (12-5)!)

= 792

Therefore, there are 792 different choices of starters that the coach can make from the team of 12 players.

Step-by-step explanation: