Find value of x and y
(2x+y , 2) = (1, x-y)​

Cramer's rule is an approach that is used to solve the system of linear equations. In this method, a square matrix is made for the coefficients of variables and then the determinants of those matrices are calculated.

:[tex][4 1 -3] [2 -3 2] [1 1 -1] The[/tex] constant

matrix (B) is shown below:[11] [9] [-3] The variable matrix (X) is shown below: [x][y][z] Now, using Cramer's rule, we can calculate the value of variables.  The determinant of the coefficient matrix (A) is as follows:∣A∣ = 4(-3)(-1) + 1(2)(1) + (-3)(1)(1) = 12 + 2 - 3 = 11

∣A3∣ = 4(1)(-3) + 1(2)(1) + (9)(1)(1) = -12 + 2 + 9 = -1Now, we can calculate the values of x, y, and z as follows: x = ∣A1∣/∣A∣ = (-6)/11 = -6/11y = ∣A2∣/∣A∣ = (-33)/11 = -3z = ∣A3∣/∣A∣ = (-1)/11 = -1/11Therefore, the value of x is -6/11, the value of y is -3, and the value of z is -1/11.

To know more about Cramer's visit:

brainly.com/question/30682863

#SPJ11

(a) high in fat, (b) high in protein, and (c) unspecified composition. The data collected reveals variations in body weight, with a mean of 194 and a standard deviation that differs among the diets.

The study aimed to investigate the effects of different macronutrient compositions on body weight. All diets had the same calorie content, ensuring that any observed differences were not due to variations in total energy intake. The summary statistics indicate that the mean body weight across the three diets was 194. However, it is important to note that the standard deviation varied among the diets. This suggests that the different macronutrient compositions influenced the variability in body weight outcomes. The second paragraph of the answer would provide a more detailed explanation of the potential reasons behind the observed variations and their implications.

Learn more about standard deviation here: brainly.com/question/29115611

#SPJ11

The value of x from the given rhombus is 40 inches.

Given that, area of a rhombus is A=330 square inches.

We know that, area of a rhombus is Area: ½ × (product of the lengths of the diagonals)

Here, 300 = 1/2 × (15×x)

15x=600

x=600/15

x=40 inches

Therefore, the value of x from the given rhombus is 40 inches.

Learn more about the rhombus here:

https://brainly.com/question/27870968.

#SPJ1

Main Answer:If your friend buys 10 identical boxes, there will be a total of 240 markers.

Supporting Question and Answer:

What is the total number of markers you currently have after purchasing 2 boxes?

The total number of markers you currently have is 48.

Body of the Solution:You purchased 2 boxes of markers, with 24 markers in each box. Therefore, you have a total of 2 boxes × 24 markers per box = 48 markers.

If your friend wants to buy 10 identical boxes, you can multiply the number of markers per box by the number of boxes your friend wants to buy:

10 boxes × 24 markers per box = 240 markers

So, if your friend buys 10 identical boxes, there will be a total of 240 markers.

Final Answer:Therefore,if your friend buys 10 identical boxes, there will be a total of 240 markers.

To learn more about markers are there in each box from the given link

https://brainly.com/question/31395696

#SPJ4

If your friend buys 10 identical boxes, there will be a total of 240 markers.

The total number of markers you currently have is 48.

Body of the Solution: You purchased 2 boxes of markers, with 24 markers in each box. Therefore, you have a total of 2 boxes × 24 markers per box = 48 markers.

If your friend wants to buy 10 identical boxes, you can multiply the number of markers per box by the number of boxes your friend wants to buy:

10 boxes × 24 markers per box = 240 markers

So, if your friend buys 10 identical boxes, there will be a total of 240 markers.

Therefore ,if your friend buys 10 identical boxes, there will be a total of 240 markers.

To learn more about markers

brainly.com/question/31395696

#SPJ4

1) the utilization rate of the system is 0.833 or 83.3%. 2) the average number of class 2 customers in the system is 0. 3) the average waiting time for class 1 customers is 20 minutes.

To answer the questions regarding the priority queue system with two classes of arrivals, we need to use the principles of queuing theory. Let's solve each question step by step:

(1) Utilization Rate of the System:

The utilization rate represents the percentage of time the servers are busy serving customers. In this case, we have three servers, and the service rate per server is 10 customers per hour.

The arrival rate for the higher priority class is 10 customers per hour, and for the lower priority class, it is 15 customers per hour. To calculate the utilization rate, we need to determine the total arrival rate.

Total Arrival Rate = Arrival Rate of Higher Priority Class + Arrival Rate of Lower Priority Class

Total Arrival Rate = 10 + 15 = 25 customers per hour

Since we have three servers, the total service rate is 3 servers * 10 customers per hour = 30 customers per hour.

Utilization Rate = Total Arrival Rate / Total Service Rate

Utilization Rate = 25 / 30 = 0.833 (rounded to three decimal places)

(2) Average Number of Class 2 Customers in the System:

To calculate the average number of class 2 customers in the system, we need to use the formula for the M/M/1 queuing model.

ρ = Arrival Rate / Service Rate

ρ = 15 / 10 = 1.5

Lq = (ρ^2) / (1 - ρ)

Lq = (1.5^2) / (1 - 1.5) = 2.25 / (-0.5) = -4.5

Since we have negative values for Lq, it means that there are no class 2 customers in the system on average.

(3) Average Waiting Time for Class 1 Customers:

To calculate the average waiting time for class 1 customers, we can use Little's Law, which states that the average number of customers in the system is equal to the arrival rate multiplied by the average time a customer spends in the system.

Average Number of Customers in the System (L) = Arrival Rate * Average Waiting Time

Since we have the arrival rate for class 1 customers as 10 per hour, we can substitute the values:

10 * Average Waiting Time = L

Now, we need to find the average number of class 1 customers in the system (L). Using Little's Law:

L = λ * W

Where λ is the arrival rate and W is the average time a customer spends in the system.

We have the arrival rate for class 1 customers as 10 per hour. To find the average time a customer spends in the system, we need to consider the service rate and the number of servers.

Service Rate per Server = 10 customers per hour

Number of Servers = 3

Effective Service Rate = Service Rate per Server * Number of Servers

Effective Service Rate = 10 * 3 = 30 customers per hour

W = L / λ

W = (10 / 30) = 1/3 hour = 20 minutes (rounded to three decimal places)

Learn more about average at: brainly.com/question/24057012

#SPJ11

the answer is: OB. bounded.

Determine whether the domain {(x, y) E R2 :

2 < x < 4,-4 Sy <3} is closed, not closed, not bounded, or bounded.

The domain is {(x, y) E R2 :

2 < x < 4,-4 Sy <3}.

For this domain to be considered closed, every limit point of the domain should be within the domain. A set is considered closed if it contains all its limit points.A limit point of a set is one that has at least one point from the set arbitrarily close to it. Therefore, we have to consider all values of x such that 2 < x < 4 and all values of y such that -4 < y < 3 in order to check whether {(x, y) E R2 :

2 < x < 4,-4 Sy <3} is closed or not.

Because every limit point of the domain is within the domain, the domain is closed. Since it is enclosed, it is also bounded. Note: A domain is considered bounded if all points in the set are located within a finite distance of one another.

To know more about domain visit;

brainly.com/question/30133157

#SPJ11

The perimeter of the rectangle is 60 cm.

We have,

The square perimeter = 20 cm

This means,

Each side of the square = 20/4 = 5 cm

Now,

From the rectangle figure,

Length = 5 + 5 + 5 + 5 = 20 cm

Width = 5 + 5 = 10 cm

So,

The perimeter of the rectangle.

= 2 (length + width)

= 2 x (20 + 10)

= 2 x 30

= 60 cm

Thus,

The perimeter of the rectangle is 60 cm.

Learn more about rectangles here:

https://brainly.com/question/15019502

#SPJ1

The simplified expression of (−x − 5 )(4x − 4) using the distributive property is -4x² - 16x + 20

From the question, we have the following parameters that can be used in our computation:

(− x− 5 ) ( 4 x− 4 )

Rewrite the expression properly

So, we have the following representation

(− x − 5 )(4x − 4)

Expanding the expression

So, we have the following representation

(−x − 5 )(4x − 4) = -4x² + 4x - 20x + 20

Evaluate the like terms

(−x − 5 )(4x − 4) = -4x² - 16x + 20

This means that the simplified expression of (−x − 5 )(4x − 4) using the distributive property is -4x² - 16x + 20

Read more about distributive property at

brainly.com/question/4077386

#SPJ1

Answer:

hello

the answer for questions 5) is:

θ = 30°, R = 6 ft

Arc = CE = Rθ ----> CE = 30 × 6 = 180

and the answer for question 6) is:

square area = A²

big square area = 4 × 4 = 16

small square area = 2 × 2 = 4

circle area = πr²

big circle area = 3.14 × (2)² = 12.56

small circle area = 3.14 × (1)² = 3.14

area of the bigger shaded region = 16 - 12.56 = 3.44

area of the smaller shaded region = 4 - 3.14 = 0.86

The indefinite integral is (-1/390625) * (6 − 5x)⁷ + C, where C is the constant of integration.

To evaluate this indefinite integral, we can use the power rule of integration, which states that ∫xⁿ dx = (x⁽ⁿ⁺¹⁾⁺⁽ⁿ⁻¹⁾ + C, where C is the constant of integration.
Using this rule, we can rewrite the integral as:
= (-1/5) * (-5/6) * (-4/7) * (-3/8) * (-2/9) * (-1/10) * (6 − 5x)⁷ + C
= (-1/5) * (-5/6) * (-4/7) * (-3/8) * (-2/9) * (-1/10) * (6 − 5x)⁷ + C
= (-1/5) * (-5/6) * (-4/7) * (-3/8) * (-2/9) * (-1/10) * (6 − 5x)⁷ + C
= (-1/5) * (-5/6) * (-4/7) * (-3/8) * (-2/9) * (-1/10) * (6 − 5x)⁷ + C
= (-1/5) * (-5/6) * (-4/7) * (-3/8) * (-2/9) * (-1/10) * (6 − 5x)⁷ + C
= (-1/5) * (-5/6) * (-4/7) * (-3/8) * (-2/9) * (-1/10) * (6 − 5x)⁷ + C
= (-1/5) * (-5/6) * (-4/7) * (-3/8) * (-2/9) * (-1/10) * (6 − 5x)⁷ + C
= (-1/390625) * (6 − 5x)⁷ + C
Therefore, the indefinite integral of (6 − 5x)^6 dx is (-1/390625) * (6 − 5x)⁷ + C.

The final answer to the indefinite integral is (-1/390625) * (6 − 5x)⁷ + C, where C is the constant of integration.

To know more about indefinite integral, click here

https://brainly.com/question/31617899

#SPJ11

The most appropriate model for this situation is b) exponential growth.

The given scenario of a disease spreading through a population, where each infected person transmits the disease to two people every day, suggests exponential growth. Therefore, the most appropriate model for this situation is b) exponential growth.

In exponential growth, the number of infected individuals increases at an accelerating rate over time. Each infected person infects a constant number of new individuals, resulting in a doubling effect. In this case, each infected person transmitting the disease to two new people every day leads to a doubling of the infected population each day.

Initially, there are 4 hosts with the disease, and each day the number of infected individuals doubles as new infections occur. The growth rate is not limited or slowed down by factors such as recovery or immunity, indicating that the population is experiencing uncontrolled growth without restrictions.

On the other hand, linear growth (a) would imply a constant increase in the number of infected individuals, exponential decay (c) would suggest a gradual decrease in the number of infected individuals, and logistic growth (d) would involve a growth pattern that initially resembles exponential growth but then levels off as it reaches the carrying capacity of the population. However, based on the given information, exponential growth best describes the situation of the disease spreading through the population.

To learn more about exponential growth here:

https://brainly.com/question/11083031

#SPJ4

The matrix of partial derivatives for the functions is

J = | 2xy x² |

     | y² 2xy |

     | ycos(xy) xcos(xy) |

A partial derivative matrix is a jacobian matrix. The determinant of the jacobian matrix is called the jacobian. All of a vector function's partial derivatives will be contained in the matrix. The transformation of coordinates is where Jacobian is most frequently used.

The matrix of partial derivatives, also known as the Jacobian matrix, for the given function is:

J = | ∂f₁/∂x ∂f₁/∂y |

| ∂f₂/∂x ∂f₂/∂y |

| ∂f₃/∂x ∂f₃/∂y |

where f₁ = x²y, f₂ = xy², and f₃ = sin(xy).

Taking partial derivatives with respect to x and y, we get:

J = | 2xy x² |

| y² 2xy |

| ycos(xy) xcos(xy) |

Therefore, the Jacobian matrix is:

J = | 2xy x² |

     | y² 2xy |

     | ycos(xy) xcos(xy) |

Learn more about partial derivatives

brainly.com/question/29650851

#SPJ11

The value of general solutions are X = c1[3,1][tex]e^{-3t}[/tex] + c2[1,3][tex]e^{6t}[/tex], X = c1[1,1][tex]e^{-t}[/tex] + c2[1,2][tex]e^{-2t}[/tex], X = c1[5,-3][tex]e^{-2t}[/tex] + c2[1,1][tex]e^{-2t}[/tex] , X = c1[5,3][tex]e^{t}[/tex] + c2[5,-3][tex]e^{-5t/5}[/tex],X = c1[1,2][tex]e^{-t}[/tex] + c2[1,-1][tex]e^{5t}[/tex], X = c1[1,-1][tex]e^{-t}[/tex] + c2[1,-1/5][tex]e^{3t}[/tex].

To solve the system of equations {x = -18x + 6y, y = -45x + 15y} using matrix method, we can represent the system in matrix form as AX = λX, where

A = [[-18, 6], [-45, 15]]

X = [x, y]

λ = eigenvalue

The eigenvalues of A can be found by solving the characteristic equation

det(A - λI) = 0

|-18-λ 6 |

|-45 15-λ| = (λ+3)(λ-6) = 0

Thus, λ = -3, 6.

To find the eigenvectors, we solve for AX = λX for each eigenvalue

For λ = -3, we have

A - λI = [[-15, 6], [-45, 18]]

[[3], [1]] is an eigenvector for λ = -3.

For λ = 6, we have

A - λI = [[-24, 6], [-45, 9]]

[[1], [3]] is an eigenvector for λ = 6.

Thus, the general solution is

X = c1[3,1][tex]e^{-3t}[/tex] + c2[1,3][tex]e^{6t}[/tex]

To solve the system of equations {x = (0 -1) (-2 -3)x} using matrix method, we can represent the system in matrix form as AX = λX, where

A = [[0, -1], [-2, -3]]

X = [x1, x2]

λ = eigenvalue

The eigenvalues of A can be found by solving the characteristic equation

det(A - λI) = 0

|-λ -1|

|-2 -3-λ| = (λ+1)(λ+2) = 0

Thus, λ = -1, -2.

To find the eigenvectors, we solve for AX = λX for each eigenvalue:

For λ = -1, we have

A - λI = [[1, -1], [-2, -2]]

[[1], [1]] is an eigenvector for λ = -1.

For λ = -2, we have:

A - λI = [[2, -1], [-2, -1]]

[[1], [2]] is an eigenvector for λ = -2.

Thus, the general solution is

X = c1[1,1][tex]e^{-t}[/tex] + c2[1,2][tex]e^{-2t}[/tex]

To solve the system of equations {x1 = x1 + 5x2, x2 = x1 - 3x2} using matrix method, we can represent the system in matrix form as AX = λX, where

A = [[1, 5], [1, -3]]

X = [x1, x2]

λ = eigenvalue

The eigenvalues of A can be found by solving the characteristic equation

det(A - λI) = 0

|(1-λ) 5 |

| 1 (-3-λ)| = (λ+2)(λ-4) = 0

Thus, λ = -2, 4.

To find the eigenvectors, we solve for AX = λX for each eigenvalue

For λ = -2, we have:

A - λI = [[3, 5], [1, -1]]

[[5], [-3]] is an eigenvector for λ = -2.

For λ = 4, we have

A - λI = [[-3, 5], [1, -7]]

[[1], [1]] is an eigenvector for λ = 4.

Thus, the general solution is

X = c1[5,-3][tex]e^{-2t}[/tex] + c2[1,1][tex]e^{-2t}[/tex]

To solve the system of equations {x = 4x + 5y, y = -x + 2y} using matrix method, we can represent the system in matrix form as AX = λX, where

A = [[4, 5], [-1, 2]]

X = [x, y]

λ = eigenvalue

The eigenvalues of A can be found by solving the characteristic equation

det(A - λI) = 0

|(4-λ) 5 |

| -1 (2-λ)| = (λ-1)(λ+5) = 0

Thus, λ = 1, -5.

To find the eigenvectors, we solve for AX = λX for each eigenvalue:

For λ = 1, we have:

A - λI = [[3, 5], [-1, 1]]

[[5], [3]] is an eigenvector for λ = 1.

For λ = -5, we have:

A - λI = [[9, 5], [-1, -3]]

[[1], [-3/5]] is an eigenvector for λ = -5.

Thus, the general solution is

X = c1[5,3][tex]e^{t}[/tex] + c2[5,-3][tex]e^{-5t/5}[/tex]

To solve the system of equations {x = (3 2) (-8 -3)x} using matrix method, we can represent the system in matrix form as AX = λX, where

A = [[3, 2], [-8, -3]]

X = [x1, x2]

λ = eigenvalue

The eigenvalues of A can be found by solving the characteristic equation

det(A - λI) = 0

|(3-λ) 2 |

|-8 (-3-λ)| = (λ+1)(λ-5) = 0

Thus, λ = -1, 5.

To find the eigenvectors, we solve for AX = λX for each eigenvalue:

For λ = -1, we have

A - λI = [[4, 2], [-8, -2]]

[[1], [2]] is an eigenvector for λ = -1.

For λ = 5, we have

A - λI = [[-2, 2], [-8, -8]]

[[1], [-1]] is an eigenvector for λ = 5.

Thus, the general solution is

X = c1[1,2][tex]e^{-t}[/tex] + c2[1,-1][tex]e^{5t}[/tex]

To solve the system of equations {x1 = -2x1 - x2, x2 = x1 - 4x2} using matrix method, we can represent the system in matrix form as AX = λX, where

A = [[-2, -1], [1, -4]]

X = [x1, x2]

λ = eigenvalue

The eigenvalues of A can be found by solving the characteristic equation

det(A - λI) = 0

|(-2-λ) -1 |

| 1 (-4-λ)| = (λ+1)(λ-3)

Thus, λ = -1, 3.

To find the eigenvectors, we solve for AX = λX for each eigenvalue:

For λ = -1, we have

A - λI = [[-1, -1], [1, -3]]

[[1], [-1]] is an eigenvector for λ = -1.

For λ = 3, we have:

A - λI = [[-5, -1], [1, -7]]

[[1], [-1/5]] is an eigenvector for λ = 3.

Thus, the general solution is

X = c1[1,-1][tex]e^{-t}[/tex] + c2[1,-1/5][tex]e^{3t}[/tex]

To know more about eigenvectors:

https://brainly.com/question/31043286

#SPJ4

-- The complete question is given below

" Solve the following systems of equations by matrix method (i.e., by solving the eigenvalue problem). (a) { x=−18x+6y

y=−45x+15y}

​(b) x =(0−1)

(-2 −3)x

(c) {x1 =x1 + 5x2

​ x2 =x1 − 3x2} (d) {x =4x+5y

y =−x+2y}

(e) x = (3 2

−8 −3)x

(f) {x1 =−2x1 - x2 x2 = x1 − 4x2}"--

Answer: 13/36(100π)

Step-by-step explanation:

Step-by-step explanation:

cube volume = x³

so 100 = x³

[tex]x = \sqrt[3]{100} = 4.642[/tex]

Tariq bought 3 bags of oranges the mass of watch bag was 3 1/3 kilograms,  he bought 10 kilograms of oranges in total.

One bag of oranges weighs 3 1/3 kilogrammes, according to the data. We multiply the whole number (3) by the fraction's denominator (3), add the numerator (1), then divide this mixed number into an improper fraction:

3 * 3 + 1 = 9 + 1 = 10

Tariq purchased three bags of oranges, each weighing 3 1/3 kilogrammes, so we can determine the overall weight of the oranges by multiplying the weight of one bag by the quantity of bags:

3 1/3 kilograms * 3 bags = (10/3) kilograms * 3

                                        = 30/3 kilograms

                                         = 10 kilograms

Thus, Tariq bought 10 kilograms of oranges in total.

For more details regarding improper fraction, visit:

https://brainly.com/question/30661219

#SPJ1

Student 2 is accurate in  the interaction between the carts is inelastic.

In an elastic collision, the total kinetic energy of the system is conserved before and after the collision. This means that the kinetic energy of the carts remains the same throughout the interaction.  

However, in an inelastic collision, the total kinetic energy of the system is not conserved, and some of the kinetic energy is converted into other forms of energy, such as heat or deformation.

In this case, since the students are claiming different outcomes for the interaction, it indicates that there is a change in kinetic energy during the collision.

If the carts collide and come to a stop or stick together, it suggests an inelastic collision. This is because the kinetic energy of the system is not conserved, as some energy is lost or transformed. Therefore, Student 2's claim that the interaction between the carts is inelastic is correct.

To learn more about collision follow the given link:

https://brainly.com/question/5719643

#SPJ4

False. In a linear multiple regression model, the y-intercept represents the value of the response variable (y) when all predictors are set to zero, except for the constant term.

The y-intercept is the value of y when the predictors have no influence or impact on the response variable.

However, it is not accurate to say that the y-intercept is the value of the response variable when both x1 and x2 are set to zero. The reason is that the y-intercept is specifically determined by the constant term in the regression model, and it does not directly depend on the values of the predictors.

To understand this further, let's consider the general form of a linear multiple regression model:

y = β0 + β1x1 + β2x2 + ε

In this equation, y represents the response variable, x1 and x2 are the predictors, β0 is the y-intercept or constant term, β1 and β2 are the coefficients associated with x1 and x2, and ε is the error term.

The y-intercept (β0) is the value of y when both x1 and x2 are set to zero. However, it does not imply that the value of y remains constant when both predictors are set to zero. The impact of x1 and x2 on the response variable y is determined by the corresponding coefficients β1 and β2.

In a linear regression model, the coefficients β1 and β2 represent the change in the response variable for each unit change in the respective predictor, assuming all other predictors are held constant. Therefore, the values of x1 and x2 determine the contribution of each predictor to the overall value of y.

Setting both x1 and x2 to zero does not eliminate the influence of the predictors on the response variable. It only removes the linear contribution from x1 and x2, but the constant term β0, which represents the y-intercept, still affects the value of y.

To summarize, the y-intercept in a linear multiple regression model does not represent the value of the response variable when both predictors x1 and x2 are set to zero. It represents the value of y when all predictors are set to zero, excluding the constant term. The y-intercept indicates the starting point of the regression line, but it does not imply that the response variable remains constant when the predictors are set to zero.

Learn more about regression here

https://brainly.com/question/17004137

#SPJ11

The function f(x) = [tex]x^2 + 1/20 x^5 + 1/56 x^8[/tex]  is the solution.

Here are the solutions to the given problems:

Solution for problem 6:

Let x and y be the two numbers where x>y, where the difference between them is 152.

So, x = y + 152

Multiplying the two equations, we have the product of the numbers, xy, as follows:

xy = (y + 152) yxy

=[tex]y^2 + 152y[/tex]

For the product to be a minimum, we need to determine the derivative of the function with respect to y.

Therefore, we differentiate the product of the two numbers with respect to y as follows:

dy/dx(xy) =

2y + 152 = 0

=> 2y = -152

=> y = -76

We can substitute y = -76 into the equation

x = y + 152 to obtain:

x = -76 + 152

= 76

Therefore, the two numbers are -76 and 76. The difference between them is 76 - (-76) = 152, which satisfies the condition.

The product of the two numbers is -76 x 76 = -5776, which is the minimum value.Solution for problem 7:

The second derivative of f(x) is given as

f''(x) = [tex]2 + x^3 + x^6.[/tex]

We can find f'(x) by integrating f''(x) with respect to x as follows:

f'(x) = [tex]\int(2 + x^3 + x^6) dx[/tex]

= [tex]2x + 1/4 x^4 + 1/7 x^7 + C1[/tex]

Where C1 is the constant of integration. To determine C1, we use the initial condition that

f'(0) = 0.f'(0)

= [tex]2(0) + 1/4 (0)^4 + 1/7 (0)^7 + C1[/tex]

= 0

=> C1 = 0

Therefore, f'(x) = [tex]2x + 1/4 x^4 + 1/7 x^7[/tex]

To obtain f(x), we can integrate f'(x) with respect to x as follows:

f(x) =[tex]\int(2x + 1/4 x^4 + 1/7 x^7) dx[/tex]

=[tex]x^2 + 1/20 x^5 + 1/56 x^8 + C2[/tex]

Where C2 is the constant of integration. To determine C2, we use the initial condition that

f(0) = 0.f(0)

= [tex]0^2 + 1/20 (0)^5 + 1/56 (0)^8 + C2[/tex]

= 0

=> C2 = 0.

To know more about differentiate visit:

https://brainly.com/question/31539041

#SPJ11

The two numbers whose difference is 152 and whose product is minimized are x = 76 and y = -76.

To find two numbers whose difference is 152 and whose product is a minimum, let's denote the two numbers as x and y.

Difference: x - y = 152

We need to find the values of x and y that minimize the product xy.

We can rewrite the difference equation as y = x - 152 and substitute it into the product equation:

P = xy

= x(x - 152)

= x² - 152x

To find the minimum value of P, we can take the derivative of P with respect to x and set it equal to zero:

P' = 2x - 152 = 0

Solving for x:

2x = 152

x = 76

Substituting x = 76 back into the difference equation:

y = 76 - 152

y = -76

Therefore, the two numbers whose difference is 152 and whose product is minimized are x = 76 and y = -76.

To know more about minimum value, visit:

https://brainly.com/question/29310649

#SPJ11

The vectors u and v are orthogonal, and their magnitudes are equal to 1. Hence, the set {u, v} is an orthonormal set.

To determine if the set of vectors {u, v} is orthonormal, we need to check if the vectors are orthogonal and if their magnitudes are equal to 1.

First, let's check if the vectors u and v are orthogonal. Two vectors are orthogonal if their dot product is zero.

The dot product of u and v is given by:

u · v = (-0.6)(-0.8) + (-0.8)(0.6) = 0.48 - 0.48 = 0

Since the dot product of u and v is zero, we can conclude that the vectors u and v are orthogonal.

Next, let's check if the magnitude of vector u is equal to 1. The magnitude of a vector u = (u1, u2) is given by:

|u| = √(u1² + u2²)

Substituting the values of u = (-0.6, -0.8):

|u| = √((-0.6)² + (-0.8)²) = √(0.36 + 0.64) = √1 = 1

The magnitude of vector u is equal to 1.

Similarly, let's check the magnitude of vector v. The magnitude of vector v = (-0.8, 0.6) is given by:

|v| = √((-0.8)² + (0.6)²) = √(0.64 + 0.36) = √1 = 1

The magnitude of vector v is also equal to 1.

No further normalization is required since the vectors are already of unit length.

In summary, the set {u, v} is an orthonormal set.

Learn more about vectors at: brainly.com/question/24256726

#SPJ11

Using a normal distribution table or calculator, we can find that approximately 88.8% of the observations will fall within this range. This means that if a variable follows a normal distribution, approximately 88.8% of the observations will fall within 1.75 standard deviations of the mean.

When a variable follows a normal distribution, it is often assumed that the distribution is symmetrical around the mean, with 50% of the observations falling above the mean and 50% falling below. However, we can use standard deviations to better understand the distribution of the data.
If a variable follows a normal distribution, approximately 68% of the observations will fall within one standard deviation of the mean. This means that if the mean is 100 and the standard deviation is 10, approximately 68% of the observations will fall between 90 and 110.
When we move to 1.75 standard deviations away from the mean, we can use a normal distribution table or calculator to find the percentage of observations falling within that range. Using the same example as before, if the mean is 100 and the standard deviation is 10, we would multiply 1.75 by 10 to get 17.5. Then, we would add and subtract 17.5 from the mean to find the range of values that fall within 1.75 standard deviations away from the mean. This gives us a range of 82.5 to 117.5.
To know more about standard deviations visit:
https://brainly.com/question/13336998

#SPJ11

The given series can be written as:

sum = sin(2π) = 0

The sum of the infinite series is 0.

To find the sum of the infinite series 1 - (2π/2!)^2/1 + (2π/4!)^2/1 - (2π/6!)^2/1 + ⋯ + (2π)^(2n)/(2n+1)!*(-1)^n + ⋯, we can use the concept of the Taylor series expansion of a function.

The given series resembles the expansion of the sine function, sin(x), where x = 2π. The Taylor series expansion of sin(x) is:

sin(x) = x - x^3/3! + x^5/5! - x^7/7! + ⋯ + (-1)^n * x^(2n+1)/(2n+1)! + ⋯

Comparing the given series with the expansion of sin(x), we can see that the terms are similar, except for the factor of (-1)^n.

Therefore, the given series can be written as:

sum = sin(2π) = 0

The sum of the infinite series is 0.

Learn more about series here:

https://brainly.com/question/11346378

#SPJ11

Answer:

See below for explanation.

Step-by-step explanation:

Each (x, y) point on the unit circle is equal to (cos θ, sin θ).

To find cot θ, where θ is the angle corresponding to the point (x, y) on the unit circle, we can use the formula:

[tex]\boxed{\cot \theta=\dfrac{\cos \theta}{\sin \theta}=\dfrac{x}{y}}[/tex]

[tex]\hrulefill[/tex]

If cot θ = 0, then x must be zero. (If y was zero, the value would be undefined). Therefore, we need to find the points on the unit circle where the x-coordinate (cos θ) is zero.

The points on the unit circle where x = 0 are:

The corresponding angles (in radians) at these points are:

    [tex]\bullet \quad \dfrac{\pi}{2}\;\;\textsf{and}\;\;\dfrac{3\pi}{2}[/tex]

Therefore, the cotangent has the value of zero at π/2 and 3π/2.

[tex]\hrulefill[/tex]

If we divide a number by the same (but negative) number, we get -1.

Similarly, if we divide a negative number by the same (but positive) number, we get -1.

Therefore, if cot θ = -1, then the x-coordinate and y-coordinate of the points must be the same, but opposite signs.

The points on the unit circle where -x = y and x = -y are:

    [tex]\bullet \quad \left(-\dfrac{\sqrt{2}}{2},\dfrac{\sqrt{2}}{2}\right)\;\; \textsf{and}\;\;\left(\dfrac{\sqrt{2}}{2},-\dfrac{\sqrt{2}}{2}\right)[/tex]

The corresponding angles (in radians) at these points are:

    [tex]\bullet \quad \dfrac{3\pi}{4}\;\;\textsf{and}\;\;\dfrac{7\pi}{4}[/tex]

Therefore, the cotangent has the value of -1 at 3π/4 and 7π/4.

The difference in mass between the two blocks is 540 kg.

To find the difference in mass between the two blocks, we need to calculate the mass of each block and then subtract one from the other.

The formula to calculate the mass of an object is:

Mass = Density * Volume

For the first block with a density of 780 kg/m³ and volume of 9 m³:

Mass₁ = 780 kg/m³ * 9 m³

For the second block with a density of 840 kg/m³ and volume of 9 m³:

Mass₂ = 840 kg/m³ * 9 m³

Now, we can calculate the difference in mass by subtracting Mass₁ from Mass₂:

Difference in Mass = Mass₂ - Mass₁

Let's perform the calculations:

Mass₁ = 780 kg/m³ * 9 m³ = 7020 kg

Mass₂ = 840 kg/m³ * 9 m³ = 7560 kg

Difference in Mass = 7560 kg - 7020 kg = 540 kg

Therefore, the difference in mass between the two blocks is 540 kg.

Learn more about Volume here

https://brainly.com/question/28058531

#SPJ4

The probability of winning the $10 is 0.017848.

Given: A lottery consists of selecting 6 numbers out of 50 numbers.

You win $10 if exactly three of your 6 numbers are matched to the winning numbers chosen.

To find: Probability of winning $10

Total number of ways to choose 6 numbers out of 50 =

[tex]$\frac{50!}{6! (50-6)!}$[/tex] = 15,890,700

Let the winning numbers contain 3 numbers and the losing numbers contain 3 numbers

Probability of choosing 3 winning numbers out of 6 = [tex]$\frac{6!}{3! (6-3)!}$[/tex]

= 20

Probability of choosing 3 losing numbers out of 44 = [tex]$\frac{44!}{3! (44-3)!}$[/tex]= 14,190

Number of ways to select 3 winning numbers and 3 losing numbers = 20 × 14,190 = 283,800

Probability of selecting 3 winning numbers and 3 losing numbers = [tex]$\frac{283,800}{15,890,700}$[/tex] = 0.017848

Round to 6 decimal places 0.017848 ≈ 0.017848

To learn more about probability, visit:

https://brainly.com/question/28045837

#SPJ11

Among different measures of forecast accuracy, the measure that penalizes the most for making large forecasting mistakes is the mean squared error (MSE). Therefore, the correct answer is option D.

The mean squared error is a widely used measure of forecast accuracy that calculates the average of the squared differences between the forecasted values and the actual values. It is computed by taking the sum of the squared errors and dividing it by the number of observations.

By squaring the errors, the mean squared error amplifies the impact of larger errors compared to smaller errors. This means that the MSE assigns more weight to large forecasting mistakes, making it a suitable measure to penalize those errors.

On the other hand, the mean absolute error (MAE) and the mean absolute percentage error (MAPE) do not penalize large forecasting mistakes as severely as the mean squared error.

The mean absolute error, option A, calculates the average of the absolute differences between the forecasted values and the actual values. Unlike the MSE, the MAE does not square the errors, which results in a linear penalty for all errors. This means that large errors and small errors have the same impact on the MAE.

The mean absolute percentage error, option C, calculates the average of the absolute percentage differences between the forecasted values and the actual values. It is similar to the MAE but expresses the errors as a percentage of the actual values. However, like the MAE, the MAPE does not square the errors and therefore does not penalize large errors more heavily.

In summary, while both the mean absolute error and the mean absolute percentage error provide valuable insights into forecast accuracy, they do not differentiate in their penalty for making large forecasting mistakes. The mean squared error, however, squares the errors, emphasizing the impact of large errors and penalizing them more heavily. Therefore, option D, mean squared error, is the correct answer.

Learn more about average at: brainly.com/question/24057012

#SPJ11

Answer:

38 & 39

Step-by-step explanation:

The time when there are 1024 bacteria is approximately 4.85 hours

Suppose the population s of a certain bacteria grows according to the equation, ds/dt = 0.05s. At t = 0 there are 32 bacteria. We are given that the population s of a certain bacteria grows according to the equation, ds/dt = 0.05s.

Therefore, we can use the formula for exponential growth to solve this question, that is,s = s0et where s is the population after t hours, s0 is the initial population, and e is the constant 2.71828... (also known as Euler's number).

We know that at t = 0, there are 32 bacteria. Therefore, s0 = 32. Therefore,s = 32et. So, we want to find the value of t such that s = 1024. Therefore,1024 = 32et.

Taking natural logarithms on both sides,

ln(1024/32) = ln(et)ln(1024/32) = t ln(e).

We know that ln(e) = 1 . Therefore,t = ln(1024/32)≈ 4.85.

Therefore, the time when there are 1024 bacteria is approximately 4.85 hours. Therefore, the answer is 4.85 (rounded to two decimal places).

To know more about bacteria refer here:

https://brainly.com/question/948922

#SPJ11

Hypothesis test at significance 0.05 is, (b) sometimes reject the null.

To provide further information, let's consider the context of the hypothesis test. In hypothesis testing, we set up a null hypothesis (H0) and an alternative hypothesis (Ha).

The significance level, often denoted as α, determines the threshold for making decisions about the null hypothesis.

If the calculated test statistic of 1.94 falls in the critical region, which is determined by the significance level, then we would reject the null hypothesis.

The critical region is the range of values where the test statistic would lead us to reject the null hypothesis.

Therefore, hypothesis test at significance 0.05 if we calculated a test statistic of 1.94 is, (b) sometimes reject the null.

Learn more about hypothesis test

brainly.com/question/17099835

#SPJ11

a. The linear function for this problem is given as follows: y = 100 - 25x.

b. The equation of the line was obtained finding first the intercept from the graph, and then taking point (4,0) to obtain the slope.

c. The slope of -25 means that in each hour, the battery decays by 25%.

The slope-intercept equation for a linear function is presented as follows:

y = mx + b

The parameters of the definition of the linear function are given as follows:

The graph of the function touches the y-axis at y = 100, hence the intercept b is given as follows:

b = 100.

In 4 hours, the battery decays by 100, hence the slope m is obtained as follows:

m = -100/4

m = -25.

Hence the function is given as follows:

y = -25x + 100.

More can be learned about linear functions at https://brainly.com/question/15602982

#SPJ1