for overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage. group of answer choices a - 20%, b - 80% a - 50%, b - 50% a - 10%, b - 90% a - 0%, b - 100%

Answers

Answer 1

For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage. The correct answer is a - 10%, b - 90%. This means that the rise time is the time it takes for the transient response to go from 10% to 90% of the step change voltage.

It is important to note that the rise time is dependent on the damping ratio of the system, which affects the speed at which the transient response reaches its steady state value.For overdamped or critically damped systems, the rise time is the time it takes for the transient response to go from a of the step change voltage to b of the step change voltage, where a and b are specific percentages of the final steady-state value.The correct answer is a - 10%, b - 90%.In an overdamped or critically damped system, the response of the system to a step change in voltage is slower than in an underdamped system, and there is no oscillation in the response. The rise time is defined as the time it takes for the output to rise from 10% to 90% of its steady-state value.For example, if the steady-state value of the output is 100 volts, the rise time for an overdamped or critically damped system would be the time it takes for the output to rise from 10 volts to 90 volts (i.e., 10% to 90% of 100 volts).Overall, the rise time is an important characteristic of the transient response of a system, as it determines how quickly the system responds to changes in input and reaches its steady-state value.For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from 10% (a) of the step change voltage to 90% (b) of the step change voltage. So, the correct answer is: a - 10%, b - 90%.

To learn more about critically damped click on the link below:

brainly.com/question/13161950

#SPJ11v

Answer 2

For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from 0% of the step change voltage to 100% of the step change voltage.

For overdamped or critically damped systems, the rise time is the time it takes the transient response to go from a of the step change voltage to b of the step change voltage, where a is 0% and b is 100%.

Therefore, the answer would be a - 0%, b - 100%.

Learn more about voltage: https://brainly.com/question/31519346

#SPJ11


Related Questions

Assume:

A = 1101 0011 1111 0110

B = 0110 1101 1101 1110

Write the series of operations necessary to pack A into B (and store the result in C), where the 8 lowest order bits of B are stored in the 8 highest order bits of C, and the 8 highest order bits of A are stored in the 8 lowest order bits of C.

Answers

To pack A into B and store the result in C, the following operations can be performed.

What is the explanation for the above response?

Perform a logical shift right on A by 8 bits, which will result in 0000 0000 1101 0011.Perform a logical shift left on B by 8 bits, which will result in 1011 0110 1101 1110.Perform a logical OR operation between the results of step 1 and step 2, which will result in 1011 0110 1111 1110.Perform a logical shift left on A by 8 bits, which will result in 0000 0000 0000 0000.Perform a logical shift right on B by 8 bits, which will result in 0000 0000 0110 1101.Perform a logical OR operation between the results of step 4 and step 5, which will result in 0000 0000 0110 1101.Perform a logical OR operation between the results of step 3 and step 6, which will result in C = 1011 0110 1111 1110 0000 0000 0110 1101.

Learn more about operations at:

https://brainly.com/question/9697567

#SPJ1

by purchasing software that gathers data and predicts trends in the most popular genres without any extra programming, the library can purchase the books that people will read

Answers

By utilizing software that collects data and forecasts trends in popular genres, the library can make informed decisions on which books to purchase. This ensures that the library's collection stays up-to-date and aligns with the reading interests of the community, ultimately leading to increased patron satisfaction and engagement.

By purchasing software that gathers data and predicts trends in the most popular genres, the library can make informed purchasing decisions on the books that people are likely to read. This eliminates the need for extra programming and ensures that the library's collection stays relevant and in-demand. The software can analyze data such as user preferences, browsing history, and book ratings to generate accurate predictions on which books will be popular in the future. This ultimately saves the library time and money by avoiding the purchase of books that may not be well-received by their audience. Overall, investing in such software can greatly benefit the library's collection development strategy and help them better serve their community's reading needs.
By utilizing software that collects data and forecasts trends in popular genres, the library can make informed decisions on which books to purchase. This ensures that the library's collection stays up-to-date and aligns with the reading interests of the community, ultimately leading to increased patron satisfaction and engagement.

To learn more about software, click here:

brainly.com/question/985406

#SPJ11

By purchasing software that gathers data and predicts trends in the most popular genres, the library can make informed decisions when acquiring new books.

This approach ensures that the library's collection remains up-to-date and relevant to the interests of its patrons, ultimately increasing the likelihood that people will read the selected books. Furthermore, this software eliminates the need for extra programming, saving time and resources.Such data-driven decisions also allow the library to maximize its budget, as it can focus on purchasing titles that are more likely to be borrowed and enjoyed by the community. Additionally, understanding trends in popular genres can assist the library in creating targeted promotions and events, further engaging patrons and fostering a love for reading.In summary, utilizing software that gathers data and predicts trends in popular genres is an efficient and cost-effective way for a library to maintain a relevant and engaging collection. This approach benefits both the library and its patrons by ensuring a diverse and appealing selection of books that cater to the community's interests.

For such more question on fostering

https://brainly.com/question/31458527

#SPJ11

This manipulator is used to establish a field width for the value that follows it: field_width set field setw iomanip None of these

Answers

The manipulator used to establish a field width for the value that follows it is setw from the iomanip library in C++. It allows you to specify the number of characters that should be used for the output of the value.

For example, if you want to output a value with a field width of 5, you would use set w(5). This will ensure that the value is formatted with 5 characters, adding spaces as necessary to achieve the desired width. So the correct option in this case would be "set field setw iomanip". The term "set field set w iomanip" does not make sense in this context.
The manipulator used to establish a field width for the value that follows it is "setw". This term is part of the iomanip library in C++. So, the correct answer is "setw". The other terms mentioned in the question, such as "field_width", "set field", and "setw ioman ip", are not relevant to the context of the question.

Visit here to learn more about iomanip library:

brainly.com/question/28343948

#SPJ11

The manipulator in question is called "setw" and it is a part of the "iomanip" library in C++. option c is correct.

This manipulator is used to set the field width for the value that follows it. The value can be a string, integer, or any other data type.

The purpose of setw is to make the output more readable and organized by aligning the data in columns. For example, if you are printing a table with multiple columns, you can use setw to set the width of each column so that the data is aligned and easy to read.

The syntax for using setw is as follows:

cout << setw(10) << "Hello";

In this example, setw(10) sets the field width to 10 characters for the string "Hello". This means that "Hello" will be printed with a width of 10 characters, even if it is shorter than that. If the string is longer than 10 characters, it will be truncated to fit within the allotted space.

Overall, setw is a useful manipulator for formatting output in C++. It helps to make the output more readable and organized, which is important when dealing with large amounts of data.

For such more question on setw

https://brainly.com/question/30436807

#SPJ11

Note: The complete question would de as bellow,

This manipulator is used to establish a field width for the value that follows it:

a)field_width

b)set field

c)setw

d)iomanip

e)None of these

You are troubleshooting an application problem and want to eliminate faulty memory as a source of the problem. Which command do you use?Mdsched.exe. Mds.chace. Mds.con

Answers

If you are troubleshooting an application problem and suspect that faulty memory may be the cause of the issue, you can use the "mdsched.exe" command to check for any memory problems.

"mdsched.exe" command runs the Windows Memory Diagnostic tool, which will test your computer's memory for any errors or issues. Once the test is complete, it will provide you with a report that you can use to determine whether faulty memory was indeed the source of the problem. It is important to eliminate faulty memory as a possible cause before moving on to other troubleshooting steps, as memory issues can often be the root cause of many application problems.

To troubleshoot an application problem and eliminate faulty memory as a source of the issue, you should use the command "mdsched.exe". This is done as follows:
1. Open the Run dialog box by pressing the Windows key + R.
2. Type "mdsched.exe" into the dialog box and hit Enter.
3. The Windows Memory Diagnostic tool will open, offering options to restart now and check for problems or check for problems the next time you start your computer.
4. Choose the appropriate option to run the memory diagnostic test.

This command, mdsched.exe, will run the Windows Memory Diagnostic tool, which is designed to detect and diagnose any issues with your computer's memory. By using this tool, you can confirm whether or not faulty memory is contributing to your application problem.

Learn more about  Windows Memory Diagnostic tool (WMD) here:

brainly.com/question/22895405

#SPJ11

Hi! To eliminate faulty memory as a source of an application problem, you should use the command "mdsched.exe".

This command launches the Windows Memory Diagnostic tool, which checks your computer's memory for any issues that might be causing the problem with your application.

Learn more about application problem: https://brainly.com/question/13818690

#SPJ11

Other Questions
answer asap, 12 points !!! the primary benefit of using a collimator on a rinn bai instrument with the bisecting technique is what term best describes a selection process against those cells whose t cell receptors bind too strongly to self-peptide/mhc combinations? Jackie has $500 in a savings account.The interest rate is 5% per year and is not compounded. How much will she have in total in 1 year? WACC Eric has another get-rich-quick idea, but needs funding to support it He chooses an all-debt funding scenario. He will borrow $2,013 from Wendy, who will charge him 4% on the loan. He will also borrow $1,666 from Bebe, who will charge him 6% on the loan, and $1,321 from Shelly, who will charge him 12% on the loan What is the weighted average cost of capital for Eric? What is the weighted average cost of capital for Eric? I% (Round to two decimal places) The vitamin most intensively involved in protein metabolism is ____.A. riboflavinB. vitamin B6C. biotinD. vitamin AE. vitamin E 5. Explain the law of conservation of energy using a relevant example from every day life. when jeremy began dating a catholic schoolmate, his parents expressed disapproval, announcing they expected him to marry a woman from their mormon community. jeremy's parents are exemplifying which of these characteristics of families? Simplify 6^2/6 x 6^12/6^8 in many ways, the relief sculpure of the procession on either side of the ara pacis recalls the frieze on the parthenon, harking back to the golden age of greece. however, it differs in which respect? 1. estonia was an independent country until 1939 when stalin and hitler signed the molotov-ribbentrop pact that had a secret clause dividing europe between the two nations. soviet troops soon occupied estonia as a result of this pact. after the soviet troops invaded estonia there was one soviet solider for about how many estonians? group of answer choices 1 soviet solider for every 5 estonian 1 soviet solider for every 18 estonian 1 soviet solider for every 12 estonian 1 soviet solider for every 10 estonian operating systems provide file organization tools called . a. file management utilities b. disk utilities c. activity monitors d. disk management tools in a(n) , the scale questions are divided into two parts equally and the resulting scores of both parts are correlated against one another. A prism is completely filled with 540 cubes that have edge length of 1/3 cm.What is the volume of the prism? how do mobile media devices and mobile-friendly platforms impact social media communication? what are the major changes and trends? Present value concept Answer each of the following questions. a. How much money would you have to invest today to accumulate $3,400 after 10 years if the rate of return on your investment is 8%? b. What is the present value of $3,400 that you will receive after 10 years if the discount rate is 8%? c.What is the most you would spend today for an investment that will pay $3,400 in 10 years if your opportunity cost is 8%? d. Compare, contrast, and discuss your findings in part a through c a. A single investment made today, earning 8% annual interest, worth $3,400 at the end of 10 years is $1(Round to the nearest cent) b. The present value of $3.400 to be received at the end of 10 years, if the discount rate is 8%, is $1. (Round to the nearest cent) C. The most you would spend today for an investment that will pay $3.400 in 10 years if your opportunity cost is 8% is $1. (Round to the nearest cent) d. Compare, contrast, and discuss your findings in part a through c. (Select all answers that apply) A. In parts a and c $3,400 is the future value, FV In part b $3.400 is the present value. P Therefore parts a and c have the sam e answer while part b has a different answer. B. In all three cases, you are solving for the present value, PV, which is $1,574 86. C. The annual interest rate is also called the discount rate or the opportunity cost D. In all three cases, the answer is $1,57486. In part a, it is the payment, PMT In part b, it is the present value, PV. In part c, it is the future value, FV. Consider the following data interest rate is per period): S = 100; K = 75; R = 1.20; u = 1.5; d = .5 a. What is the binomial price of a European call option with two periods until expiration? What is the price an American option with the same strike price and same time to expiration. Is there ever early exercise? b. Show that the binomial option price for a European put option with two periods to go until expiration is 3.125. Show that the binomial price for an American put is 6.25. Can you conclude from the difference in prices alone that early exercise may be optimal? When is it optimal? c. Use your answers to (i) and (ii) to verify that put-call parity holds for European options, but not for American options. which of the following statements apply to the asthenosphere, but not the lithosphere? group of answer choices deforms mainly by brittle fracturing and faulting cool, rigid layer of crust and upper mantle that forms the tectonic plates zone in the upper mantle that deforms by plastic flowage Find the value of x .J30MtoK(2x - 30)[ which of the following null hypothesis statistical tests require calculating degrees of freedom? group of answer choices all of the above two-sample t-test chi-squared one-sample t-test