From the top of a 120-foot-high tower, an air traffic controller observes an airplane on the runway at an angle of depression of 19°. How far from the base of the tower is the airplane? Round to the nearest tenth.

1. 126.9 ft
2. 368.6 ft
3. 41.3 ft
4. 348.5 ft
​

Answer: there is only one number

Answer:

Solo hay un número primo que se puede escribir como suma de dos números primos y también como diferencia de dos números primos.

Espero haber ayudado :D

The length of the given line AB is 6 units and the polygon ABCDEF has been created.

A graph is a mathematical structure made up of a collection of points called VERTICES and a set of lines connecting some pair of VERTICES that may or may not be empty.

There is a chance that the edges will be directed, or orientated.

If the lines are directed or undirected, respectively, they are referred to as ARCS or EDGES.

Make a sequence of bars on graph paper as an example of a graph.

So, in the given situation the polygon ABCDEF has been created:

(Refer to the graph attached below)

Now, the length of the side AB:

Count the units as follows which comes to 6 units.

Therefore, the length of the given line AB is 6 units and the polygon ABCDEF has been created.

Know more about the graph here:

https://brainly.com/question/19040584

#SPJ1

Correct question:

Help Here is your graph of the points on the previous screen.

Connect the points in order to create polygon `ABCDEF`.

1.2 Enter the length of the segment between A and B.

It depends on the rotational speed of the wheel. To calculate this speed, we need to know the angular velocity of the wheel.

The maximum speed of a point on the outside of the wheel, 15 cm from the axle, if we assume that the wheel is rotating at a constant rate, we can use the formula v = rω, where v is the speed of the point on the outside of the wheel, r is the radius of the wheel (15 cm in this case), and ω is the angular velocity of the wheel. Therefore, the maximum speed of a point on the outside of the wheel would be directly proportional to the angular velocity of the wheel.
The formula to calculate the maximum linear speed (v) is:
v = ω × r
where v is the linear speed, ω is the angular velocity in radians per second, and r is the distance from the axle (15 cm, or 0.15 meters in this case).
Once you have the angular velocity (ω) of the wheel, you can plug it into the formula and find the maximum speed of a point on the outside of the wheel.

Learn more about rotational speed here: brainly.com/question/17025846

#SPJ11

The missing angles of the diagram are:

∠1 = 118°

∠2 = 62°

∠3 = 118°

∠4 = 30°

∠5 = 32°

∠6 = 118°

∠7 = 30°

∠8 = 118°

Supplementary angles are defined as two angles that sum up to 180 degrees. Thus:

∠1 + 62° = 180°

∠1 = 180 - 62

∠1 = 118°

Now, opposite angles are congruent and ∠2 is an opposite angle to 62°. Thus: ∠2 = 62°.

Similarly: ∠3 = 118° because it is congruent to ∠1

Alternate angles are congruent and ∠5 is an alternate angle to 32°. Thus:

∠5 = 32°

Sum of angle 4 and 5 is a corresponding angle to ∠2 . Thus:

∠4 + ∠5 = 62

∠4 + 32 = 62

∠4 = 30°

This is an alternate angle to ∠7 and as such ∠7 = 30°

Sum of angles on a straight line is 180 degrees and as such:

∠8 = 180 - (30 + 32)

∠8 = 118° = ∠6 because they are alternate angles

Read more about Missing Angles at: https://brainly.com/question/28293784

#SPJ1

The cube roots of 216 written in the rectangular (standard) form are 3 + 3√3, -3+3√3, and 6.

In mathematics, the cube root formula is used to represent any number as its cube root, for example, any number x will have the cube root 3x = x1/3. For instance, 5 is the cube root of 125 as 5 5 5 equals 125.

3√216 = 3√(2x2x2)x(3x3x3)

= 2 x 3 = 6

the prime factors are represented as cubes by grouping them into pairs of three. As a result, the necessary number, which is 216's cube root, is 6.

Therefore, the cube roots of 216 are 3 + 3√3, -3+3√3, and 6.

Learn more about cube root, here:

https://brainly.com/question/31153573

#SPJ1

The logical assumption used is: An arithmetic sequence is a set of discrete values, whereas a line is a continuous set of values.

An arithmetic sequence is a set of numbers where, with the exception of the first term, each term is obtained by adding a fixed constant to the term before it. Every pair of following terms in the sequence has the same fixed constant, which is known as the common difference. A1 stands for the first term in an arithmetic sequence, while an is used to represent the nth term.

A solid line symbolises continuous numbers, whereas the classmate's logical presumption is that an arithmetic series comprises of discrete values. This presumption is untrue, though, as a line can effectively represent an arithmetic series.

Learn more about arithmetic sequence here:

https://brainly.com/question/29616017

#SPJ1

Answer:

7,000,000÷2000

= 3,500

Step-by-step explanation:

therefore, each worker makes 3500 bikes per year

The MAD of the hourly wages given would be $ 0.48. The range would be $ 2.00. Q1 would be $8.25. Q3 would then be $9.25. The IQR would be $1.00

Calculate the MAD:

First, find the mean of the data set:

mean = (sum of all values) / (number of values)

mean = (8.25 + 8.50 + 9.25 + 8.00 + 10.00 + 8.75 + 8.25 + 9.50 + 8.50 + 9.00) / 10

mean = 88.00 / 10 = 8.80

Then, find the mean of these absolute deviations:

MAD = (sum of absolute deviations) / (number of values)

MAD = (0.55 + 0.30 + 0.45 + 0.80 + 1.20 + 0.05 + 0.55 + 0.70 + 0.30 + 0.20) / 10

MAD = 4.10 / 10 = 0.41

Calculate the range:

range = maximum value - minimum value

range = 10.00 - 8.00 = 2.00

Find Q1 and Q3:

{8.00, 8.25, 8.25, 8.50, 8.50, 8.75, 9.00, 9.25, 9.50, 10.00}

Q1 is the median of the lower half, and Q3 is the median of the upper half.

Lower half: {8.00, 8.25, 8.25, 8.50, 8.50}

Upper half: {8.75, 9.00, 9.25, 9.50, 10.00}

Q1 = median of lower half = 8.25

Q3 = median of upper half = 9.25

Calculate the IQR:

IQR = Q3 - Q1

IQR = 9.25 - 8.25 = 1.00

Find out more on MAD at https://brainly.com/question/3250070

#SPJ1

I gotchu <3

Since the vertex is (0, -3), the quadratic function can be written in vertex form as:

f(x) = a(x - 0)^2 - 3

Where 'a' is a constant that determines the shape of the parabola. Since the end behavior of the function is y --> - Infinite as x --> - infinite and y --> - Infinite as x --> + infinite, the leading coefficient 'a' must be negative.

So, f(x) = -a(x^2 - 0x) - 3

Now, using the given point (1, -7) on the parabola, we can substitute the coordinates into the function and solve for 'a'.

-7 = -a(1^2 - 0(1)) - 3

-7 = -a - 3

a = 10

Therefore, the quadratic function that satisfies the given characteristics is:

f(x) = -10x^2 - 3

Hope this helps :)

Equation that represents the total number of minutes y Emily studied for the math exam is y = 40 +x.

We can represent the total number of minutes Emily studied for the math exam using the equation,

y = 40 + x

Here, 'y' represents the total number of minutes Emily studied for the math exam, '40' represents the number of minutes she studied in the morning, and 'x' represents the number of minutes she studied later that evening.

By adding the number of minutes studied in the morning to the number of minutes studied later that evening, we can calculate the total number of minutes Emily studied for the math exam.

To learn more about Equation here:

https://brainly.com/question/29147854

#SPJ4

Step-by-step explanation:

hope this will help you Thanks

It will take John approximately 17 months to pay off the balance.

What is simple interest?

Simple Interest (S.I.) is the method of calculating the interest amount for a particular principal amount of money at some rate of interest.

Assuming that John does not use the credit card for any other purchases and that the credit card company uses a simple interest calculation method, we can use the following steps to calculate the number of months it will take John to pay off the balance:

Calculate the monthly interest rate by dividing the annual percentage rate (APR) by 12:

Monthly interest rate = 19% / 12 = 0.01583

Calculate the monthly finance charge by multiplying the outstanding balance by the monthly interest rate:

Monthly finance charge = $2000 x 0.01583 = $31.66

Subtract the monthly payment from the monthly finance charge to get the amount that will be applied to the outstanding balance:

Payment applied to balance = $150 - $31.66 = $118.34

Divide the outstanding balance by the payment applied to balance to get the number of months it will take to pay off the balance:

Number of months to pay off balance = $2000 / $118.34 = 16.9

(rounded up to the nearest whole number)

Therefore, it will take John approximately 17 months to pay off the balance.

To learn more about the simple interest visit:

brainly.com/question/20690803

#SPJ1

The statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

The expression 100 - 0.4m represents the amount of medicine in Evan's bloodstream after m minutes, where the amount of medicine decreases by 0.4 milligrams each minute.

The coefficient of the variable m (-0.4) represents the rate of change of the amount of medicine in Evan's bloodstream per minute. It tells us that for every one minute that passes, the amount of medicine in his bloodstream decreases by 0.4 milligrams.

The constant term (100) represents the initial amount of medicine in Evan's bloodstream before the medicine starts to decrease.

Therefore, the statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ1

The resultant value of the given expression x² + 10x + 24 when x = 3 is (C) 63.

A finite collection of symbols that are properly created in line with context-dependent criteria is referred to as an expression, sometimes known as a mathematical expression.

Expressions in writing are made using mathematical operators such as addition, subtraction, multiplication, and division.

For instance, "4 added to 2" will have the mathematical formula 2+4.

So, we have the expression:

= x² + 10x + 24

Now, solve when x = 3 as follows:

= x² + 10x + 24

= 3² + 10(3) + 24

= 9 + 30 + 24

= 63

Therefore, the resultant value of the given expression x² + 10x + 24 when x = 3 is (C) 63.

Know more about expressions here:

https://brainly.com/question/723406

#SPJ1

Correct question:

Evaluate the expression when x = 3.

x² + 10x + 24

a. 81

b. 86

c. 63

d. 60

Answer: Sarah bought 5 first class tickets and (13-5) = 8 coach tickets.

Step-by-step explanation: The taken a toll of one to begin with lesson ticket is $1200 and the fetched of one coach ticket is $380.

So, the full taken a toll of first class tickets would be 1200x and the entire cost of coach tickets would be 380(13-x) = 4940 - 380x.

The overall fetched of the tickets is given as $9040, so we will set up the taking after condition:

1200x + 4940 - 380x = 9040

Streamlining and tackling for x, we get:

820x = 4100

x = 5

Answer: This situation involves choosing a group of 5 players out of a total of 12 players, where the order in which the players are chosen does not matter. Therefore, this is an example of a combination problem.

The number of ways to choose a group of 5 players out of 12 is given by the formula for combinations:

n C r = n! / (r! * (n-r)!)

where n is the total number of players, r is the number of players being chosen, and "!" represents the factorial operation.

In this case, we have n = 12 and r = 5, so the number of different choices of starters is:

12 C 5 = 12! / (5! * (12-5)!)

= 792

Therefore, there are 792 different choices of starters that the coach can make from the team of 12 players.

Step-by-step explanation:

We need approximately 12 servings of Designer Whey and 2 servings of Muscle Milk to obtain a 7-day supply that provides exactly 262 grams of protein and 54 grams of carbohydrates.

Let x be the number of servings of Designer Whey and y be the number of servings of Muscle Milk needed to obtain a 7-day supply that provides exactly 262 grams of protein and 54 grams of carbohydrates.

From the information given, we know that each serving of Designer Whey provides 20 grams of protein and 3 grams of carbohydrates, and each serving of Muscle Milk provides 16 grams of protein and 9 grams of carbohydrates.

Therefore, we can set up the following system of equations:

20x + 16y = 262

3x + 9y = 54

To solve for x and y, we can use any method of solving a system of equations. For example, we can use substitution:

From the second equation, we can solve for x in terms of y:

x = (54 - 9y)/3 = 18 - 3y

Substituting this into the first equation, we get:

20(18 - 3y) + 16y = 262

Simplifying, we get:

80y = 182

Solving for y, we get:

y = 2.275

Substituting this into the equation x = 18 - 3y, we get:

x = 12.175

To learn more about equations click on,

https://brainly.com/question/29118974

#SPJ4

To determine if each ordered pair is a point of intersection between the line x - y = 6 and the circle y² - 26 = -x², we need to substitute the values of x and y in both equations and see if they are true for both.

For the ordered pair (1, -5):

x - y = 6 becomes 1 - (-5) = 6, which is true.

y² - 26 = -x² becomes (-5)² - 26 = -(1)², which is false.

Therefore, (1, -5) is not a point of intersection.

For the ordered pair (1, 5):

x - y = 6 becomes 1 - 5 = -4, which is false.

y² - 26 = -x² becomes (5)² - 26 = -(1)², which is true.

Therefore, (1, 5) is a point of intersection.

For the ordered pair (5, -1):

x - y = 6 becomes 5 - (-1) = 6, which is true.

y² - 26 = -x² becomes (-1)² - 26 = -(5)², which is false.

Therefore, (5, -1) is not a point of intersection.

So the answer is:

(1,-5) - No

(1,5) - Yes

(5,-1) - No

to know more about equations

brainly.com/question/29657983

#SPJ1

The surface area of the cylinder is approximately 94.2 ft².

Surface area refers to the total area of the external or outer part of an object. It is the sum of the areas of all the individual surfaces or faces of the object. Surface area is typically measured in square units, such as square inches (in²), square feet (ft²), or square meters (m²), depending on the unit of measurement used.

According to the given information:

The surface area of a cylinder is the sum of the lateral surface area (the curved surface) and the area of the two circular bases.

The formula for the lateral surface area of a cylinder is given:

Lateral Surface Area = 2πrh

where r is the radius of the cylinder and h is the height of the cylinder.

Plugging in the given values for the radius (r = 3 ft) and height (h = 2 ft), we can calculate the lateral surface area:

Lateral Surface Area = 2π * 3 * 2 = 12π ft²

The formula for the area of a circle (which represents the bases of the cylinder) is given:

Circle Area = πr²

Plugging in the given value for the radius (r = 3 ft), we can calculate the area of each circular base:

Circle Area = π * 3² = 9π ft²

Since there are two bases in a cylinder, we multiply this by 2 to account for both bases:

2 * Circle Area = 2 * 9π = 18π ft²

Now, we can add the lateral surface area and the area of the two bases to find the total surface area of the cylinder:

Total Surface Area = Lateral Surface Area + 2 * Circle Area

= 12π + 18π

= 30π ft²

As a decimal rounded to the nearest tenth, the surface area of the cylinder is approximately 94.2 ft²

To know more about surface area visit: https://brainly.com/question/22074027

#SPJ1

The expression for the problem is:

Total cost = $42 + ($12/hour × 3 hours) × 2 people

Bruce charged David and Ricky a fixed fee of $42 for parts plus an hourly rate of $12 for labor. He spent 3 hours repairing the motorcycle. Since there are two people (David and Ricky), we need to multiply the hourly rate by the number of hours worked (3) and then multiply that by 2. Finally, we add the fixed fee for the parts to get the total cost.

To evaluate the expression using the order of operations, we need to perform the multiplication first and then the addition. So, we have:

Total cost = $42 + ($12/hour × 3 hours) × 2 people

= $42 + ($36) × 2

= $42 + $72

= $114

Therefore, David and Ricky owe Bruce a total of $114 for the motorcycle repair.

Learn more expression on

https://brainly.com/question/1859113

#SPJ1

All of these ratios are equal to b, and we have shown that there is a constant ratio between consecutive output values.

The common ratio is the ratio that remains constant between successive function output values. The behaviour of a geometric sequence, which is a series of numbers where each term is produced by multiplying the one before it by a set number (the common ratio), depends on the common ratio. The sequence is rising exponentially if the common ratio is bigger than 1. The sequence decreases exponentially if the common ratio is between 0 and 1.

To show that the function form shows a constant ratio we take:

[tex](x+1) / f(x) = (ab^{(x+1)}) / (ab^x) = b[/tex]

Similarly, we have:

[tex]f(x+2) / f(x+1) = (ab^{(x+2)}) / (ab^{(x+1)}) = b[/tex]

Hence, all of these ratios are equal to b, and we have shown that there is a constant ratio between consecutive output values.

Learn more about ratio here:

https://brainly.com/question/29774220

#SPJ1

Answer:

see the images and explanation

Step-by-step explanation:

for the graph:

the domain 0 < x < 5

the range for each functions:

g(x) = 2x + 1

g(x) = y  ,   1 < y < 11

h(x) = 2x + 2 ,  2 < y < 12

Answer:

Jaxon made 11 free throws over the season.

Step-by-step explanation:

If he made 5% of his free throws, we know that he will make 5% of the total number of free throws he took, which is 220:

We multiply 220 by 0.05, or 5% to find out how many free throws he made:

220*0.05 = 11

After that, we now know that Jaxon made 11 of his free throws out of 220 over the course of the season, or 5%.

1. Mean = 54

2. Standard Deviation = 6.3

3. Probability = 0.077

4. Probability = 0.845

5. Probability = 0.155

6. Probability = 0.323

For a normal distribution ,a positive value of z simply means that the observation or sample mean is above the population mean this implies

none of the options provided is completely accurate.

All the observations must have had positive values,

It is not necessarily true for a positive value of z.

The value of z indicates how many standard deviations away from the mean a particular observation or sample mean is.

A positive value of z simply means that the observation or sample mean is above the population mean.

The area corresponding to the z is either positive or negative,

It is also not accurate.

The area under the normal curve corresponds to probabilities, not positive or negative values.

The area to the right of the mean corresponds to positive z-values, and the area to the left of the mean corresponds to negative z-values.

The sample mean is smaller than the population mean,

It is a possibility when the z-value is negative, indicating that the sample mean is below the population mean.

The sample mean is larger than the population mean,

It is a possibility when the z-value is positive, indicating that the sample mean is above the population mean.

Therefore, the sample mean can be either larger or smaller than the population mean depending on the direction of the z-value.

Learn more about population mean here

brainly.com/question/29064364

#SPJ4

To compute the covariance matrix of the variables in the data, the "matrix-operation" which should be used is ([tex]X^{t}[/tex] × X)/n.

The "Covariance" matrix is defined as a symmetric and positive semi-definite, with the entries representing the covariance between pairs of variables in the data.

The "diagonal-entries" represent the variances of individual variables, and the off-diagonal entries represent the covariances between pairs of variables.

Step(1) : Compute the transpose of the centered data matrix X, denoted as [tex]X^{t}[/tex]. The "transpose" of a matrix is found by inter-changing its rows and columns.

Step(2) : Compute the "dot-product" of [tex]X^{t}[/tex] with itself, denoted as [tex]X^{t}[/tex] × X.

The dot product of two matrices is computed by multiplying corresponding entries of the matrices and summing them up.

Step(3) : Divide the result obtained in step(2) by the number of samples in the data, denoted as "n", to get the covariance matrix.

This step scales the sum of the products by 1/n, which is equivalent to taking the average.

So, the covariance matrix "C" of variables in "centered-data" matrix X can be expressed as: C = ([tex]X^{t}[/tex] × X)/n.

Learn more about Covariance Matrix here

https://brainly.com/question/30481066

#SPJ4

The given question is incomplete, the complete question is

Let X be a matrix of centered data with a column for each field in the data and a row for each sample. Then, not including a scalar multiple, how can we use matrix operations to compute the covariance matrix of the variables in the data?

Step-by-step explanation:

Again, using similar triangle ratios

7.2 m  is to 2.4 m  

     as   AB is to  12.0 m

7.2 / 2.4  = AB/12.0    Multiply both sides of the equation by 12

12 *   7.2 / 2.4   = AB = 36.0 meters