Geometry, Help Please hurry!!!

In the diagram, ABCD is Similar EFGH. Find the following,

4. Scale Factor

5. EH

6. AB

Mark needs to invest 5572.24 hours (rounded to one decimal place) of study time in order to achieve an A letter grade in this course.

To determine the estimated minimum number of hours Mark should study, we need to solve for the number of hours such that his predicted score, given by the regression equation from part (b), is at least 90.

The regression equation is as follows: Predicted score = 48.74 + 0.00726(number of hours studied)

Setting the predicted score equal to 90 and solving for the number of hours studied gives:90 = 48.74 + 0.00726 (number of hours studied)

Solving for the number of hours studied gives: number of hours studied = (90 - 48.74)/0.00726= 5572.24

Therefore, Mark should study for 5572.24 hours (rounded to one decimal place) to receive a letter grade of A for this course.

To know more about regression equation refer here:

https://brainly.com/question/30738733#

#SPJ11

The total number of units produced in an 8-hour day is approximately 22.86 units.

There are different ways to approach this problem, but one possible method is to use the concept of cycle time and the total available production time to determine the number of units produced in a day.

An operation is performed on a batch of 100 units.

Setup time is 20 minutes and run time is 1 minute.

The total number of units produced in an 8-hour day is:

Step 1: Find the cycle time per unitThe cycle time per unit is the sum of the setup time and the run time:

Cycle time = setup time + run time = 20 minutes + 1 minute = 21 minutes.

Step 2: Find the total available production time in a day

One day has 24 hours, but 8 hours are not available for production due to breaks, maintenance, and other factors. Therefore, the total available production time is:

Total available production time = 8 hours × (60 minutes per hour) = 480 minutes.

Step 3: Calculate the number of units produced in a day

The number of units produced in a day is the total available production time divided by the cycle time per unit:

Units produced = total available production time ÷ cycle time= 480 minutes ÷ 21 minutes≈ 22.86 units (rounded to two decimal places)

Therefore, the total number of units produced in an 8-hour day is approximately 22.86 units.

This assumes that there is no variability in the process, and that all units are of good quality.

If there are any defects, rework, or other disruptions, the actual production may be lower.

For similar question on approximately.

https://brainly.com/question/114935

#SPJ11

Answer:

275

Step-by-step explanation:

You have a 1 in 2 chance

550/2

275 times

The surface area of this rectangular prism is equal to 68 mm².

In Mathematics and Geometry, the surface area of a rectangular prism can be calculated and determined by using this mathematical equation or formula:

SA = 2(WH + LW + LH)

Where:

By substituting the given parameters into the formula for the surface area of a rectangular prism, we have the following;

SA = 2(1 × 4 + 6 × 1 + 6 × 4)

SA = 2(4 + 6 + 24)

SA = 2(34)

SA = 68 mm².

Read more on surface area of a rectangular prism here: brainly.com/question/28185251

#SPJ1

Thus, 4.0 moles of NH3 would be produced when 6.0 moles of H2 react with sufficient N2.

Suppose 6.0 mol of H2 reacts with sufficient N2 to produce ammonia, NH3. We can determine the number of moles of NH3 produced using stoichiometry.The balanced chemical equation for the reaction is:[tex]3H2(g) + N2(g) → 2NH3(g)[/tex]

From the equation, we can see that 3 moles of H2 react with 1 mole of N2 to produce 2 moles of NH3.

Therefore, using the mole ratio from the balanced equation, we can calculate the number of moles of NH3 that would be produced when 6.0 mol of H2 reacts with [tex]N2:6.0 mol H2 × (2 mol NH3/3 mol H2) = 4.0 mol NH3[/tex]

for such more questions stoichiometry

https://brainly.com/question/9413308

#SPJ11

Answer: Shape one: 5, Shape 2: 13

Step-by-step explanation:

shape one
12^2+x^2=13^2

shape two
5^2+12^2=x^2

Answer:

PLEASE MARK ME AS BRAINLLIEST

Step-by-step explanation:

p=12

h=13

b=?

p²+b²=h²

12²+b²=13²

144+b²=169

b²=169-144

   = 25

b=root25

b=5m

b=5

p=12

h=?

p²+b²=h²

12²+5²=h²

144+25=h²

h²=169

h=root169

h=13

The analysis of the data to obtain the best fit line equations that model the data, indicates;

5. a. Quadratic

b. y = -0.1179·x² + 2.1124·x + 4.215

c. Please find the completed chart showing the predicted values and the  in the residuals in the following section.

6. a. A linear model may not be appropriate for the data in the residual plot

b. 4

c. 5

4. a. The exponential model of the function is; y = 100·e^(-0.124·t)

b. The weight after 8 weeks is about 37.1 grams

c. The sample will be 4 grams in about 26 weeks

5. a. The equation is; y = 22.703·x + 2.5733

b. The predicted y-value at x = 10 is; y = 229.60

c. The first time is about x ≈ 3.54

The best fit line is a line that is drawn through a set of data points in such a way that it minimizes the sum of squared errors of the data.

5. The best fit model can be obtained by plotting a scatter plot of the graph, which indicates that the best fit line resembles the shape of a parabola.

Therefore;

a. The best fit equation is; Quadratic

b. The best fit equation, obtained using technology is; y = -0.1179·x² + 2.1124·x + 4.215

The square of the correlation coefficient is; R² = 0.9584

The chart can be filled with the best fit equation as follows;

[tex]\begin{tabular}{ | c | c | c | c | c | }\cline{1-4}Distance (foot) & Height (foot) & Predicted Value &Residual \\ \cline{1-4}0 & 4 & 4.215 & -0.215 \\\cline{1-4}2 & 8.4 & 8.16588 & 0.23412 \\\cline{1-4}6 & 12.1 & 13.23804 & -1.13804 \\\cline{1-4}9 & 14.2 & 14.56626 & -0.36626\\\cline{1-4}12 & 13.2 & 13.77228 & -0.57228 \\\cline{1-4}13 & 10.5 & 13.03602 & -2.53602 \\\cline{1-4}15 & 9.8 & 10.8561 & -1.0561 \\\cline{1-4}\end{tabular}[/tex]

The predicted value are obtained by plugging in the x-value into the best fit equation and the residuals is the difference between the actual value and the predicted value.

6. a. A residual plot can be used to as assessment with regards to meeting the assumptions of a linear regression model.

A residual plot that is randomly scattered about zero indicates that a linear model is appropriate for the data.

The data points in the residual plot are not expressed as being randomly scattered around zero.

The pattern that exists in the residual plot indicates that the values are positive for x-values that are either low or high, and the middle x-values have a negative residuals. Therefr;

b. The number of positive residuals = 4

c. The number of negative residuals = 5

4. The general form of the exponential model of a function, y = A × e^(-k·t)  can be used to find the function for the data as follows;

A = The initial amount = The value at 0 = 100

y = The amount of radioactive material at a given time t

e = Euler's number = 2.71828

The datapoints in the table indicates;

88.3 = 100 × e^(-k × 1)

k = -㏑(0.883) ≈ 0.124

The exponential model is therefore; y = 100 × e^(-0.124·t)

b. The weight of the sample after 8 weeks can be obtained by plugging in t = 8 in the exponential function for the weight of the radioactive substance as follows;

y = 100 × e^(-0.124 × 8) ≈ 37.1

The weight of the sample after 8 weeks is about 37.1 grams

c. When the sample is 4 grams we get;

y = 4

4 = 100 × e^(-0.124 × t)

e^(-0.124 × t)  = 4/100 = 1/25

-0.124 × t = ln(1/25) = -ln(25)

t = ln(25)/0.124 ≈ 26

t ≈ 26 weeks

Therefore; The weight will be 4 grams after approximately 26 weeks

5. A linear regression can be performed using MS Excel to obtain the equation that models the data as follows;

y = 22.703·x + 2.5733

The square of the regression coefficient is; R² = 0.9995

a. The most appropriate equation to model the data in the table is; y = 22.703·x + 2.5733

b. The y-value when x = 10 can be predicted by plugging in x = 10 into the  model equation for the data as follows;

y = 22.703 * 10 + 2.5733 ≈ 229.60

Therefore;

c. The first time the y-value is 83, can be found by setting y = 83 in the equation and solve for x as follows;

83 = 22.703·x + 2.5733

22.703·x = (83 - 2.5733)

x = (83 - 2.5733)/22.703 ≈ 3.54

Therefore, the first time the y-value is 83 is when x is approximately 3.54

Learn more on the line of best fit here: https://brainly.com/question/16760506

#SPJ1

The correct interpretations of the given quantity are C and E.

C. Your daily viewing time is greater than 90% of all Netflix users.

E. 90% of all Netflix users viewing times per day are less than your daily viewing time.

To understand the correct interpretation, we need to first understand what the 90th percentile means. It refers to the value below which 90% of the data falls.

If your daily viewing time is in the 90th percentile of all Netflix users, it means that your viewing time is greater than 90% of all users. In other words, only 10% of users watch more Netflix than you, and your viewing time is greater than the viewing time of 90% of users.

Therefore, options C and E are the correct interpretations.

Learn more about Interpretations:

https://brainly.com/question/1449267

#SPJ4

Complete Question:

Suppose the amount of time (in minutes) per day that you spend watching Netflix is in the 90th percentile of all account users. Which interpretation(s) of this quantity are correct? Select ALL that apply.

A. You spend approximately 90 minutes per day watching Netflix.

B. 90% of all viewers spend more time on Netflix per day than you.

C. Your daily viewing time is greater than 90% of all Netflix users.

D. There is a 90% probability that a randomly selected viewer spends less time than you watching Netflix per day.

E. 90% of all Netflix user viewing times per day are less than your daily viewing time.

F. 90% of all Netflix user viewing times per day are less than or equal to your daily viewing time.

Answer:

2.80

Step-by-step explanation:

It asks to find the shipping and handling price.

The first step is take that percentage, 20% and convert into decimal form. Then you need to multiply that by the original price. So it would be 0.2 x 14.

That gives you 2.80 which is the shipping and handling price. That's all you have to do.

The extent to which a sample over or under represents characteristics of the population is known as sampling error.

Sampling error is the difference between the characteristics of a sample and the characteristics of the population from which it is drawn. Sampling error occurs when a sample does not accurately represent a population due to the selection of individuals. It is measured as the difference between a sample statistic and the corresponding population parameter. For example, if a sample of 100 people is taken from a population of 1,000 people, the sample might not accurately reflect the population as a whole due to random selection.

Sampling error is an important consideration in survey research, as it can have an effect on the accuracy of the results. Sampling error can be reduced by using larger sample sizes or by using more representative sampling methods.

For more such questions on Sampling error.

https://brainly.com/question/15521268#

#SPJ11

The optimal solution would be to use $240 worth of professional grade material for each frame.

An optimal solution is a solution that provides the best possible outcome for a problem or situation, given a set of constraints or requirements. In mathematical optimization, an optimal solution is the solution that maximizes or minimizes an objective function while satisfying a set of constraints.

In other words, an optimal solution is the solution that is most efficient, effective, or desirable according to a certain set of criteria. It is the solution that achieves the best possible outcome, given the available resources and limitations.

To find the optimal solution, we need more information about the specific weight specification and the cost of different types of materials.

However, if we assume that there is only one type of material available, and that it costs $x per yard, we can set up an equation to find the optimal solution:

30x = cost per frame

If the professional grade material costs $8 per yard, then the equation becomes:

30(8) = $240 per frame

So, the optimal solution would be to use $240 worth of professional grade material for each frame, assuming that it meets the weight specification. If the weight specification requires a different amount of material, or if there are other materials available at different prices, the optimal solution would be different.

To know more about equation visit:

https://brainly.com/question/545403

#SPJ1

Answer: 3 5/8 pizzas were there at the start of the party.

Step-by-step explanation:

At the party let number of pizzas were = x Aisha and her friends ate 2 1/2 pizzas after which 1 1/8 pizzas were left.

Therefore the equation formed will be

x- 2 1/2= 1 1/8

x-(5/2)= 9/8

x= 9/8 + 5/2

x= 29/8= 3 5/8

Therefore 3 5/8 pizzas were there at the start of the party.

The outcomes of the statistical analysis can give medical professionals and patients important knowledge regarding the possible advantages of the new procedure.

The study of random events or phenomena is the focus of the mathematical field of probability. It is a way to gauge how likely something is to happen. It is represented by a number between 0 and 1, where 0 denotes the event's impossibility and 1 denotes its certainty. There are numerous ways to calculate probabilities, including utilizing theoretical or mathematical models, empirical data, and experimental data.

given

A statistical analysis would be useful to evaluate the effectiveness of the novel technique to the standard procedure based on the study's design.

The recovery periods of the two patient groups might be compared using statistical techniques like hypothesis testing and confidence intervals to assess the efficacy of the new therapy.

Researchers can establish whether the new approach is statistically significantly superior than the usual procedure in terms of minimizing recovery time by comparing the recovery times of the two groups.

The outcomes of the statistical analysis can give medical professionals and patients important knowledge regarding the possible advantages of the new procedure.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

Total volume of the composite figure using volume of cuboid formula is = 120ft³.

A cuboid's volume is a measurement of how much room it occupies. A three-dimensional shape with dimensions of length, breadth, and height is the cuboid. We can keep stacking them, starting with a rectangular sheet, until we achieve a shape with a particular length, breadth, and height.

The shape of this stack of sheets is a cuboid, which has 6 faces, 12 edges, and 8 vertices. The (unit)³ is used to represent a cuboid's volume.

In the given figure,

Length of cuboid = 6ft.

Breadth of cuboid = 3ft.

Height of cuboid = 5ft.

Length of second cuboid = 4ft.

Height of second cuboid = 5ft.

Breadth of second cuboid = 3ft.

Volume of first cuboid = length × breadth × height.

= 6 × 3 × 5

= 90ft³

Volume of second cuboid = 4 × 3 × 5

= 60ft³

Now the second cuboid is half.

So, volume becomes = 60/2

= 30ft³.

So, total volume of the figure = 90 + 30 = 120ft³.

To know more about volume, visit:

https://brainly.com/question/29568631

#SPJ1

Answer:

x > 3

Step-by-step explanation:

This is an open circle, meaning there will be no equal sign.

The line is going to the right of 3, meaning x > 3

So, our inequality is x > 3

Answer:

2/3 is the answer .......mmm..

The wallpaper cost $40 to John.

To find the amount of wallpaper John purchased, we have to solve for x in the cost function equation.

First, let's write down the cost function c(x) using the given information.Cost function equationc(x) = 12x + 20.

Here, x is the amount of wallpaper needed in square meters, and c(x) is the total cost John has to pay, including the cost of wallpaper and delivery.

Now, let's use the given total cost of $500 and solve for x.c(x) = 12x + 20Since the total cost John paid is $500, we can write the following equation:12x + 20 = 500

To solve for x, we can isolate x on one side by subtracting 20 from both sides.12x = 480x = 40Therefore, John purchased 40 square meters of wallpaper.

Answer: 40

To know more about Cost function refer here:

https://brainly.com/question/13288616?referrer=searchResults

#SPJ11

1: The measure of arc JML is: arc JML = 176°

3: m∠WXY = 59°

5: The measure of the arc is: arc FE = 54°

7: The measure of the angles are: m∠A  = 79° and m∠B  = 112°

9: The value of x is: x = 9

No. 1

The measure of inscribed angle is half the measure of its intercepted arc. That is:

∠ JKL = 1/2 * arc JML

88 = 1/2 * arc JML

arc JML = 2 * 88

arc JML = 176°

No. 3

arc WY =  360 - 86 - 156 = 118° (sum of angles in a circle)

m∠WXY = 1/2 * arc WY

m∠WXY = 1/2 * 118

m∠WXY = 59°

No. 5

An angle inscribed in a semicircle is a right angle. Thus, m∠DFE = 90°

m∠EDF = 180 - 90 - 63 = 27° (sum of angles in a triangle)

m∠EDF  = 1/2 * arc FE

27°  = 1/2 * arc FE

arc FE = 2 * 27

arc FE = 54°

No. 7

The opposite angle in a cyclic quadrilateral add up to 180°. That is:

m∠A + m∠C  = 180°

m∠A + 101 = 180

m∠A  = 180 - 101

m∠A  = 79°

m∠B + m∠D  = 180°

m∠B + 68 = 180

m∠B  = 180 - 68

m∠B  = 112°

No. 9

67 = 1/2 * (16x - 10)

67 * 2 = (16x - 10)

16x - 10 = 134

16x  = 134 + 10

16x = 144

x = 144/16

x = 9

Learn more about inscribed angles on:

brainly.com/question/30289513

#SPJ1

There are 100,000 possible five-digit student ID numbers that can be created if repeat digits are allowed (10^5).

However, if repeats are not allowed, there are only 9 x 9 x 9 x 9 x 9 = 590,490 possible student ID numbers that can be created (9^5).

The reason for the difference is that when repeats are allowed, you can use the same digit multiple times, for example "11111".

When repeats are not allowed, you can only use each digit once, for example "12345". The possible permutations of the digits 0-9 increase as more digits are added to the ID number, meaning that the more digits there are, the more possible combinations there are.

Therefore, when repeats are not allowed, the number of possible combinations is reduced significantly. In the case of five-digit student ID numbers, the difference is almost twofold.

To know more about combinations click on below link:

https://brainly.com/question/20211959#

#SPJ11

In this particular question, the following statements can be used to complete each sentence with either "increases" or "decreases":

- Phytic acid decreases the absorption of zinc from grains.

Oxalic acid decreases the absorption of calcium from spinach.

- Refinement of grains decreases the mineral content of grain products.-

Vitamin C increases the absorption of iron from foods.-

Vitamin D increases the absorption of calcium from foods.

Explanation:

Bioavailability refers to the proportion of a nutrient that is absorbed from food and made available for use in the body. Factors that alter bioavailability of minerals from foods include phytic acid, oxalic acid, refinement of grains, and vitamins C and D. Phytic acid, for instance, decreases the absorption of zinc from grains while oxalic acid decreases the absorption of calcium from spinach.

           Refinement of grains, on the other hand, decreases the mineral content of grain products. Conversely, vitamin C increases the absorption of iron from foods while vitamin D increases the absorption of calcium from foods.

To know more about Bioavailability:

https://brainly.com/question/4352095

#SPJ11

Answer:

Step-by-step explanation:

Let's represent the maximum number of operations per second as "x".

If the computer is running at 40% of the maximum, it is performing 0.4x operations per second.

We are given that the computer is performing 30 operations per second, so we can set up an equation:

0.4x = 30

Solving for x:

x = 75

Therefore, the maximum number of operations the computer can perform per second is 75.

So, the correct answer is 4. 75 operations per second.

The length of the missing side is 3√17 ft. Option B is the correct option.

What is the hypotenuse?

The longest side of a right-angled triangle, or the side opposite the right angle, is known as the hypotenuse in geometry. The Pythagorean theorem, which states that the square of the length of the hypotenuse equals the sum of the squares of the lengths of the other two sides, can be used to determine the length of the hypotenuse.

The △ABC is a right-angled triangle.

Thus the sum of squares of the legs of the triangle is equal to the square of the hypotenuse.

The hypotenue is 13 ft.

Assume that the missing leg is equal to x.

The legs of the triangle are x and 4ft.

Apply Pythagorean theorem:

13² = 4² + x²

x² = 169 -16

x² = 157

x = √(3×3×17)

x = 3 √17

To learn more about Pythagorean theorem, click on the below link:

https://brainly.com/question/28982469

#SPJ9

Luis wants to create a graph using PowerPoint to show how much weight he lost after starting an exercise plan over six months. The type of graph that Luis should use is a line graph.

What is a line graph?A line graph is a method of displaying data or information on a two-dimensional Cartesian plane. It is mostly used to display changes over time or trends. It is ideal for data that has a lot of numeric data or that change frequently over time.The line graph is made up of two lines, one horizontal and the other vertical, which connect the data points in a sequential order. It is best used for visual representation of data, as it provides the viewer with a simple, visual representation of the data.

The x-axis and y-axis of a line graph represent the independent and dependent variables, respectively. The x-axis is often used to represent the time or the data being analyzed, while the y-axis represents the numerical values that are being analyzed.To create a line graph using PowerPoint, you can use the Insert Chart button to add your data, then choose Line Graph as the type of chart you want to create. You can then customize the chart as you like, including changing the colors, fonts, and background.

Learn more about  line graph:https://brainly.com/question/9699786

#SPJ11

Answer:

2/9yd²

Step-by-step explanation:

We know that area is calculated by length × width, so we will do the same here. To get the area, we must multiply 1/3 by 2/3.

1/3 × 2/3 is 2/9. So, the area of the rectangle is 2/9yd². :D

The equation of the line is 9x+8y + 19 = 0 and 5x - 4y+ 19 = 0 According to the given graphs, these are the equations of the graph.

Consider two points on the blue line.

The points are (5, -8) and ( -3,1 ).

Equation of the blue line is:

y - 1 = [tex]\frac{-8-1}{5+3} (x+3)[/tex]

8 (y - 1) = -9 ( x + 3)

8y - 8 = -9x -27

9x + 8y + 19 = 0

Therefore, the Equation of the blue line is 9x + 8y + 19 = 0.

Consider two points on the red line.

The points are (-3, 1) and ( 1,6 ).

Equation of the red line is:

y - 1 = [tex]\frac{6-1}{1+3} (x+3)[/tex]

4 (y - 1) = 5 (x + 3)

4y - 4 = 5x + 15

5x - 4y+ 19 = 0

Therefore, the Equation of the red line is 5x - 4y+ 19 = 0.

Hence, the equations for the given blue and red lines are completed.

Learn more about Graphs:

https://brainly.com/question/11507954

#SPJ1

Answer:

Step-by-step explanation:

nothing makes it true

The given interval suggests that the mean number of porcupine teeth marks on all wooden blocks treated with the repellent is less than 6 since the upper limit of the interval is 5.8. This claim falls within the given interval and is supported by the data. Therefore, we can say that the mean number of porcupine teeth marks on all wooden blocks treated with the repellent is less than 6 based on the 95 percent confidence interval (4.9,5.8).

In the given scenario, a sample of 20 wooden blocks treated with a liquid repellent designed to reduce damage caused by porcupines were left outside in an area where porcupines are known to live. After some time, the blocks were inspected for the number of porcupine teeth marks visible. The data collected was then used to create the 95 percent confidence interval (4.9,5.8).

The 95 percent confidence interval can be defined as a range of values that we can be 95 percent confident the true population parameter falls within. In this case, the true population parameters is the mean number of porcupine teeth marks on all wooden blocks treated with the repellent.

From the given interval, we can conclude that we are 95 percent confident that the true mean number of porcupine teeth marks on all wooden blocks treated with the repellent is between 4.9 and 5.8.

Therefore, any claim that falls within this interval is supported by the data.

for such more questions on  parameters

https://brainly.com/question/29344078

#SPJ11

There are 4896 ways of arranging 7 pets in a row of 7 chairs such that at least 2 cats are next to each other.

Arrangement of entities can be done using permutation and combination in mathematics.

Consider the distributions where 2 cats are not next to each other as

C D C D C D C.

There are 4! ways to seat the cats, and 3! ways to seat the dogs that gets us N=4! 3! = 144

There are a total of 7!=5040 possible ways to seat both cats and dogs.

At least 2 cats seat together= All possible arrangements- None of the cat seat together.

Thus the number of seatings where at least 2 cats are adjacent is

5040-144 = 4896

So, there are 4896 arrangements can be made so that at least 2 of the cats seat together.

Learn more about permutation and combination, here:

https://brainly.com/question/28720645

#SPJ12

1.8 ml (milliliters) the nurse will administer the vial of the Midazolam of ordered 9mg.

The formula of calculating this is D/H × Q = x  

where x = Desired dose amount, D = ordered Dose amount, H = amount on hand and Q = quantity.

From the following questions we have.

9mg = order dose, 5mg = amount on hand and 1ml quantity.

x = 9/5 × 1

= 1.8 ml.

Midazolam is administered carefully .it is used for sedation and anesthesia before surgical procedure. Midazolam is a short acting drug under benzodiazepines which have sedation power, so use or administered carefully before surgical procedure.

To learn more about milliliters click here

brainly.com/question/20320379

#SPJ4