Give the common name for each of the following molecular compounds.
NH3 is ___ and H2O is ___ .

Answers

Answer 1

NH3 is commonly known as ammonia and H2O is commonly known as water. Molecular compounds are formed by the combination of two or more non-metal elements.

These compounds are also known as covalent compounds as they are held together by covalent bonds. Covalent bonds are formed by the sharing of electrons between two atoms. Molecular compounds are characterized by their low melting and boiling points and are generally poor conductors of electricity.
NH3, which is ammonia, is a colourless gas with a pungent odour. It is used in the production of fertilizers, cleaning agents, and as a refrigerant. NH3 is composed of one nitrogen atom and three hydrogen atoms. It is a basic compound and reacts with acids to form ammonium salts.
H2O, which is water, is a colourless, odourless, and tasteless liquid. It is essential for all forms of life on Earth and is the most common substance on Earth's surface. Water is composed of two hydrogen atoms and one oxygen atom. It is a polar compound, which means it has a positive and negative end. Water is a versatile solvent and is capable of dissolving many substances.
In conclusion, NH3 is commonly known as ammonia and H2O is commonly known as water. These molecular compounds have unique properties and are essential to life on Earth.

To learn more about molecular compounds, refer:-

https://brainly.com/question/30328923

#SPJ11


Related Questions

Which of the following is not believed to have been a component of the early Earth's atmosphere?
a. N2 (nitrogen gas)
b. H2 (hydrogen gas)
c. CO2 (carbon dioxide)
d. O2 (oxygen gas)

Answers

Answer:

D) Oxygen Gas

Explanation:

Early Earth's atmosphere lacked oxygen gas due to the lack of general vegetation on Earth (plants produce O2 gas as a byproduct of photosynthesis) and the large presence of volcanic gases, which are mostly made up of CO2.

Answer:

D. O2 (oxygen gas)

What did Neil Armstrong earn a master’s degree in from the University of Southern California?

Answers

Neil Armstrong earned a Master of Science degree in Aerospace Engineering from the University of Southern California in 1970.

He pursued this degree while working as a NASA astronaut His thesis was focused on the stability of a lunar landing vehicle during the final phase of descent.

In 1962, Armstrong joined NASA as a civilian test pilot and astronaut. He soon became part of the Gemini and Apollo space programs. During his tenure at NASA, he piloted the Gemini 8 mission in 1966. He also commanded the Apollo 11 mission in 1969, where he became the first person to set foot on the Moon.

Learn more about Neil Armstrong, here:

https://brainly.com/question/30763002

#SPJ1

Gold has a specific heat of 0.129 J/(g x °C). How many joules of heat energy are required to raise the temperature of 15 grams of gold from 22°C to 85°C?
A. 121 J
B. 1.2 x 102 J
C. 43 J
D. 164 J

Answers

To calculate the joules of heat energy required to raise the temperature of 15 grams of gold from 22°C to 85°C, you can use the formula: Q = mcΔT where Q is the heat energy in joules, m is the mass in grams, c is the specific heat, and ΔT is the change in temperature.

Given: m = 15 grams c = 0.129 J/(g x °C) Initial temperature = 22°C Final temperature = 85°C First, find the change in temperature (ΔT): ΔT = Final temperature - Initial temperature ΔT = 85°C - 22°C ΔT = 63°C Now, plug the values into the formula: Q = (15 g) x (0.129 J/(g x °C)) x (63°C) Q = 121.635 J Since the answer should be in whole joules, you can round it to the nearest whole number: Q ≈ 122 J None of the given options match the calculated answer. However, option A (121 J) is closest to the calculated value of 122 J, so it can be considered as the best available answer among the provided options.

Learn more about temperature here-

https://brainly.com/question/11640665

#SPJ11

A combustion reaction is given below:
2 C8H18(l) + 25 O2(g) --> 16 CO2(g) + 18 H2O(g)
Which of the following is true about the total number of reactants and the total number of products in the reaction shown below?

Question 7 options:

27 moles of reactants chemically change into 34 moles of products


27 kilograms of reactants chemically change into 34 grams of products


27 atoms of reactants chemically change into 34 atoms of products


27 grams of reactants chemically change into 34 grams of products

Answers

27 moles of reactants chemically change into 34 moles of products. Option A

What is a chemical reaction?

One or more chemicals, referred to as reactants, are transformed into one or more new substances, referred to as products, during a chemical reaction. Chemical bonds between atoms, ions, or molecules are broken and created during chemical reactions.

When  we look at the reaction, we can see that the statement that is true about the total number of reactants and the total number of products in the reaction 27 moles of reactants chemically change into 34 moles of products.

Learn more about reaction:https://brainly.com/question/9601381

#SPJ1

What is an effective safety measure when running a new reaction?
Keep the temperature low.
Run the reaction on a small scale.
Run the reaction for just a short time.
Avoid using any catalysts.

Answers

An effective safety measure when running a new reaction is to start by b. Run the reaction on a small scale.

By conducting the experiment with smaller quantities of reactants, you can minimize potential hazards and more easily monitor the reaction. This allows you to observe any unexpected outcomes or side reactions that may occur.
Keeping the temperature low is another important safety measure. High temperatures can lead to increased reaction rates and the formation of more side products, making the reaction difficult to control. By maintaining a lower temperature, you can better manage the reaction and ensure a safer process.
Running the reaction for a short time is also a useful strategy. By limiting the reaction time, you can quickly identify any issues that may arise, such as excessive heat generation or unexpected byproducts. This enables you to address these issues promptly before they escalate.
While avoiding catalysts may seem like a safe choice, it is essential to understand that catalysts can improve the reaction's efficiency and selectivity. When used correctly, catalysts can make a reaction safer and more controlled. It is crucial to choose an appropriate catalyst and use it in the correct proportions to ensure a safe reaction.
In summary, when running a new reaction, it is essential to implement safety measures such as running the reaction on a small scale, maintaining a low temperature, and limiting the reaction time. Additionally, the proper use of catalysts can enhance reaction safety and control.

To learn more about new reaction, refer:-

https://brainly.com/question/19072147

#SPJ11

Methane (CH4) is used in laboratory burner. When 1 mole of methane burns at constant pressure, it produces 804 kJ of heat and does 3 kJ of work.1. What is the value of ÎH for the combustion of one mole of methane?2. What is the value of ÎE for the combustion of one mole of methane?

Answers

The answers are 1. the value of ΔH° for the combustion of one mole of methane is -801 kJ/mol and 2. the value of ΔE° for the combustion of one mole of methane is also -801 kJ/mol.

1. The value of ΔH° for the combustion of one mole of methane can be calculated using the first law of thermodynamics:ΔH° = ΔE° + PΔVWhere ΔE° is the change in internal energy of the system, P is the pressure, and ΔV is the change in volume. Since the combustion is done at constant pressure, ΔV is equal to the volume of the gaseous products minus the volume of the gaseous reactants, which is negligible. Therefore, we can assume that ΔV is zero and simplify the equation to:ΔH° = ΔE° + PΔV = ΔE°Given that 1 mole of methane produces 804 kJ of heat and does 3 kJ of work, the change in internal energy can be calculated as:[tex]ΔE° = q + w = -804 kJ + 3 kJ = -801 kJ/mol[/tex]Therefore, the value of ΔH° for the combustion of one mole of methane is -801 kJ/mol.2. The value of ΔE° for the combustion of one mole of methane can be calculated using the same equation as above:[tex]ΔE° = q + w = -804 kJ + 3 kJ = -801 kJ/mol[/tex]Therefore, the value of ΔE° for the combustion of one mole of methane is also -801 kJ/mol.The difference between ΔH° and ΔE° is that ΔH° accounts for any work done by the system, while ΔE° only accounts for the change in internal energy of the system. In this case, since the work done is negligible compared to the heat produced, the values of ΔH° and ΔE° are almost identical.

For more such question on combustion

https://brainly.com/question/24113573

#SPJ11

What bonds of the reactants are broken in this reaction? What bonds are formed in the product?

Answers

Endothermic bonds of the reactants are broken in this reaction. Exothermic bonds are formed in the product.

Reactants are substances that undergo chemical reactions to form products. They are the starting materials that are consumed during a chemical reaction. Reactants can be either a single element or a compound, and they typically interact with each other in specific ways to produce new chemical compounds.

In a chemical equation, reactants are written on the left side of the arrow, and products are written on the right side. The number of atoms and the type of atoms in the reactants and products must be equal, according to the law of conservation of mass. Chemical reactions occur when reactant molecules collide with sufficient energy to overcome the activation energy barrier. The reactants then rearrange their atoms to form new products with different properties.

To learn more about Reactants visit here:

brainly.com/question/13005466

#SPJ4

For the following error, select the answer that correctly describes how it will affect the value of the final temperature of the water/solution in the calorimeter:
Some of the NH4NO3 solid was spilled on the lab bench and not successfully added to the calorimeter.

Answers

When some of the NH4NO3 solid is spilled on the lab bench and not successfully added to the calorimeter, it will affect the final temperature of the water/solution in the calorimeter.

A calorimeter is a device used to measure the heat of a chemical reaction or physical change. In this case, the reaction between NH4NO3 and water is being measured.Since a smaller amount of NH4NO3 is added to the calorimeter, the reaction's heat production will be less than expected. As a result, the temperature change of the water/solution in the calorimeter will be smaller. This means that the final temperature of the water/solution will be higher than it would have been if the correct amount of NH4NO3 had been added.In summary, spilling some of the NH4NO3 solid on the lab bench and not adding it to the calorimeter will cause the final temperature of the water/solution in the calorimeter to be higher than expected, as less heat is produced by the reaction with a smaller amount of NH4NO3.

Learn more about calorimeter here

https://brainly.com/question/2963957

#SPJ11

Consider the following unbalanced redox reaction: niso4 (aq) cr (s) → ni (s) cr2(so4)3 (aq) how many moles of electrons are transferred in the balanced reaction?

Answers

The number of electrons transferred in the balanced reaction NiSO₄(aq) + 2Cr(s) → Ni(s) + Cr₂(SO₄)₃(aq) + 3e⁻ are 3.

To balance the given redox reaction, we need to first identify the oxidation states of the elements in the reactants and products. In NiSO₄, the oxidation state of Ni is +2, while in Ni(s) it is 0. In Cr(s), the oxidation state of Cr is 0, while in Cr₂(SO₄)₃, it is +3.

We can balance the equation by adding electrons (e-) to one of the species. The oxidation half-reaction is,

Cr → Cr³⁺ + 3e⁻

The reduction half-reaction is,

Ni²⁺ + 2e⁻ → Ni

By multiplying the oxidation half-reaction by 2 and adding it to the reduction half-reaction, we get the balanced equation:

NiSO₄(aq) + 2Cr(s) → Ni(s) + Cr₂(SO₄)₃(aq) + 3e⁻

In this balanced equation, 3 moles of electrons are transferred.

To know more about balancing redox reaction, visit,

https://brainly.com/question/27907895

#SPJ4

Complete question - Consider the following unbalanced redox reaction,

NiSO₄(aq) + Cr(s) → Ni(s) + Cr₂(SO₄)₃(aq) how many moles of electrons are transferred in the balanced reaction?

Which compound will experience the largest change in temperature during evaporation for 30 seconds at room temperature?
a CH3CH2CH3
b CH4
c CH3CH2CH2CH2CH3​

Answers

Answer: CH4

Explanation: Methane

Distinguish between ionic and covalent compounds under the following properties:
(a) Strength of forces between constituent elements
(b) Solubility of compounds in water
(c) Electrical conduction in substances a) Ionic compounds have strong force of attraction between the oppositely charged ions (e.g Na+Cl−) so they are solids . Covalent compounds have weak force of attractio between their molecules so they are usually liquids or gases.
(b) IOnic compounds are soluble in water but covalent compounds are insoluble in water.
(c) Ionic compounds conduct electricity when dissolved in water or when melted because they contains they (charged particles) But covalent, compounds like glucose do not conduct electricity because they do not contain ions.

Answers

(a) Ionic compounds have strong electrostatic forces of attraction and Covalent compounds have weaker forces of attraction between their molecules. (b) Ionic compounds are generally soluble in water, while covalent compounds are often insoluble in water. (c) Ionic compounds conduct electricity when dissolved in water or melted and Covalent compounds, do not conduct electricity.

Ionic and covalent compounds are two types of chemical compounds that differ in their properties. Here are the differences between ionic and covalent compounds based on three properties:

(a) Strength of forces between constituent elements: Ionic compounds are formed by the transfer of electrons from one atom to another, resulting in the formation of ions with opposite charges that are held together by strong electrostatic forces of attraction. Covalent compounds are formed by the sharing of electrons between atoms, resulting in the formation of molecules that are held together by weaker intermolecular forces.

(b) Solubility of compounds in water: Ionic compounds are generally soluble in water because they can dissociate into ions that can be hydrated by water molecules. Covalent compounds are generally insoluble in water because they do not dissociate into ions and are not attracted to water molecules.

(c) Electrical conduction in substances: Ionic compounds can conduct electricity when dissolved in water or when melted because the ions are free to move and carry an electric charge. Covalent compounds do not conduct electricity because they do not have free ions to carry an electric charge.



To know more about Ionic and covalent compounds, refer to the link below:

https://brainly.com/question/14451130#

#SPJ11

Report Table KSP. 2: Titation Calculations (calcium hydroxide solubility in water) Table view List view Titration of saturated Ca(OH)2 in water with HCI Trial 1 Trial 2 Final buret reading (mL) 12. 65 12. 45 Initial buret reading (mL) 1. 75 1. 81 Volume of HCI added (mL) 10. 9 10. 64 Concentration of OH (M) 0. 000533 0. 000533 Complete the following ICE table using your titration data and the stoichiometry of the dissolution reaction

Answers

The average value of [Ca2+] and use to the Ksp of Ca(OH)2 is  1.14 x [tex]10^{-5}[/tex].

The dissolution reaction of calcium hydroxide in water can be represented as:

Ca(OH)2 (s) ⇌ Ca2+ (aq) + 2 OH- (aq)

The ICE table for the dissolution reaction is as follows:

Initial: Ca(OH)2 (s) -- --

Change: - +x +2x

Equilibrium: Ca(OH)2 (s) x 2x

Using the titration data, we can calculate the moles of H+ added to the solution:

Trial 1: 0.0109 L x 0.1045 M = 0.00114 moles H+

Trial 2: 0.01064 L x 0.1045 M = 0.00111 moles H+

Trial 1: [OH-] = 0.00114 moles / (0.025 L x 2) = 0.0228 M

Trial 2: [OH-] = 0.00111 moles / (0.025 L x 2) = 0.0222 M

Using the ICE table, we can calculate the concentration of Ca2+:

Trial 1: [Ca2+] = 2x = 2(0.0228 M) = 0.0456 M

Trial 2: [Ca2+] = 2x = 2(0.0222 M) = 0.0444 M

Finally, we can calculate the average value of [Ca2+] and use it to calculate the Ksp of Ca(OH)2:

[Ca2+]avg = (0.0456 M + 0.0444 M) / 2 = 0.0450 M

Ksp = [Ca2+][OH-]² = (0.0450 M)(0.0225 M)² = 1.14 x [tex]10^{-5}[/tex]

Ksp, or the solubility product constant, is a term used in chemistry to describe the equilibrium constant of a sparingly soluble salt in a solvent. When salt is added to a solvent, it may not completely dissolve due to its limited solubility. At this point, the salt particles in the solution start to interact with the solvent molecules, forming a saturated solution.

The Ksp is a measure of the concentration of ions in the saturated solution, which is in equilibrium with the undissolved salt. It is calculated by multiplying the concentrations of the dissociated ions raised by their stoichiometric coefficients in the balanced chemical equation for the dissolution reaction. Ksp values are unique to each sparingly soluble salt and depend on factors such as temperature, pressure, and the solvent used.

To learn more about Ksp visit here:

brainly.com/question/31384943

#SPJ4

questions 4-7 are related to the following organic synthesis reaction. there are four total reactions associated with this reaction sequence. questions 4 and 5 will be multiple choice and questions 6 and 7 will be short answer. question 4 - what is the necessary reagent to accomplish step 1 of this reaction sequence?

Answers

To accomplish step 1 of this organic synthesis reaction, the necessary reagent is sodium hydride (NaH). This is a strong base commonly used in organic synthesis to remove acidic hydrogen atoms and form new carbon-carbon bonds. In this reaction, NaH is used to deprotonate the alpha carbon of the ketone, forming an enolate ion.

The enolate ion then attacks the electrophilic carbon of the ester in an aldol condensation reaction, resulting in the formation of a beta-hydroxyketone product.
NaH is preferred over other bases because it is highly reactive and can be easily removed from the reaction mixture by filtration. Additionally, it does not add any unwanted byproducts to the reaction, making it a clean and efficient choice. Other bases, such as potassium tert-butoxide or lithium diisopropylamide (LDA), could also be used in this reaction, but NaH is often the preferred choice due to its high reactivity and ease of use.

for more such questions on  sodium hydride

https://brainly.com/question/13061869

#SPJ11

The following items are required to create a concise informative plot for each of the terms listed. (Some terms are used more than once.)
The choices are (reaction, chemicals or system being investigated / special conditions of the experiment / best fit line or curve with an equation / units (if any) / table with headers containing units / name or symbol of the variable)
Title [ Choose ] Axes [Choose ] Akes [ Choose] Data [Choose] Data [ Choose ] reaction, chemicals or system being investigated special conditions of the experiment best fit line or curve with an equation units (if any) table with headers containing units name or symbol of the variable

Answers

To create a concise informative plot for each of the terms listed, the following items are required: 1. Reaction, Chemicals or System Being Investigated:
Title: Give a descriptive title that clearly indicates the nature of the investigation.
Axes: Label the x-axis and y-axis with the appropriate variables that are being measured.
Data: Plot the data points on the graph.
Table with Headers Containing Units: Create a table that displays the data collected during the experiment, with headers containing units.
Name or Symbol of the Variable: Clearly identify the variables being measured, either by their name or symbol.

2. Special Conditions of the Experiment:
Title: Include the special conditions being tested in the title.
Axes: Label the x-axis and y-axis with the appropriate variables that are being measured.
Data: Plot the data points on the graph.
Table with Headers Containing Units: Create a table that displays the data collected during the experiment, with headers containing units.
Name or Symbol of the Variable: Clearly identify the variables being measured, either by their name or symbol.

3. Best Fit Line or Curve with an Equation:
Title: Give a descriptive title that clearly indicates the nature of the investigation.
Axes: Label the x-axis and y-axis with the appropriate variables that are being measured.
Data: Plot the data points on the graph.
Best Fit Line or Curve with an Equation: Draw the best fit line or curve through the data points and display the equation on the graph.
Units (if any): Include units on the axes and in the equation.
Name or Symbol of the Variable: Clearly identify the variables being measured, either by their name or symbol.

4. Units (if any):
Title: Give a descriptive title that clearly indicates the nature of the investigation.
Axes: Label the x-axis and y-axis with the appropriate variables that are being measured, including their units.
Data: Plot the data points on the graph.
Table with Headers Containing Units: Create a table that displays the data collected during the experiment, with headers containing units.
Name or Symbol of the Variable: Clearly identify the variables being measured, either by their name or symbol.

5. Table with Headers Containing Units:
Title: Give a descriptive title that clearly indicates the nature of the investigation.
Axes: Label the x-axis and y-axis with the appropriate variables that are being measured.
Table with Headers Containing Units: Create a table that displays the data collected during the experiment, with headers containing units.
Name or Symbol of the Variable: Clearly identify the variables being measured, either by their name or symbol.

To know more about chemical reaction, refer

https://brainly.com/question/25769000

#SPJ11

Which pair of properties describes the elements in Group 18?

F. They are chemically stable and liquid at room temperature.

G. They have eight valence electrons and are flammable.

H. They are magnetic and boil at low temperatures.

J. They are gaseous at room temperature and chemically stable

Answers

The correct option is J, They are gaseous at room temperature and chemically stable" which correctly describes the properties of the elements in Group 18.

Room temperature is typically defined as the temperature range at which a substance or reaction is carried out under normal laboratory conditions, without the need for specialized equipment or procedures to control the temperature. Room temperature is usually considered to be around 20-25 degrees Celsius (68-77 degrees Fahrenheit), although this can vary slightly depending on the specific laboratory or experiment.

At room temperature, most common substances are in a stable, solid or liquid state, and many chemical reactions can take place at a reasonable rate without the need for additional heating or cooling. However, it is important to note that certain reactions or materials may require more precise temperature control in order to ensure accurate results or prevent safety hazards.

To learn more about Room temperature visit here:

brainly.com/question/8739174

#SPJ4

Chemistry help!!!! Answer all the blank please and thanks! (WIll give brainliest)

Answers

Boric acid is a monoprotic and Lewis acid. B(OH)[tex]_3[/tex] + H[tex]_2[/tex]O ⇌ [BO(OH)[tex]_2[/tex]]− + H[tex]_3[/tex]O+ and HBO[tex]_2[/tex] + H[tex]_2[/tex]O ⇌ [BO[tex]_2[/tex]]− + H[tex]_3[/tex]O+ are the reactions for ionisation of boric acid.

In particular, orthoboric acid is a boron, oxygen, plus hydrogen chemical having the formula B(OH)3. Trihydroxidoboron, hydrogen orthoborate, and boracic acid are other names for it. It occurs naturally as the substance known as sassolite and is typically found as colourless crystals.

A white powder that dissolves in water. It is a weak acid that can react using alcohols to produce borate esters as well as a variety of borate anions and salts. Boric acid is a monoprotic and Lewis acid. B(OH)[tex]_3[/tex] + H[tex]_2[/tex]O ⇌ [BO(OH)[tex]_2[/tex]]− + H[tex]_3[/tex]O+ and HBO[tex]_2[/tex] + H[tex]_2[/tex]O ⇌ [BO[tex]_2[/tex]]− + H[tex]_3[/tex]O+ are the reactions for ionisation of boric acid.

To know more about Boric acid, here:

https://brainly.com/question/14879930

#SPJ1

the pressure exerted by a gas on its container is directly proportional to select one: a. the volume of the container. b. the mass of the individual gas molecules. c. the centigrade temperature of the gas. d. the number of molecules of gas in the sample. e. the fahrenheit temperature of the gas.

Answers

The pressure exerted by a gas on its container is directly proportional to the volume of the container. This relationship is known as Boyle's Law, named after the physicist Robert Boyle who first discovered it in the 17th century. Boyle's Law states that when the temperature of a gas remains constant, the pressure and volume of the gas are inversely proportional to each other. In other words, as the volume of the container decreases, the pressure of the gas increases, and vice versa.

This relationship can be explained by the behavior of gas molecules. When a gas is contained in a container, its molecules are constantly colliding with the walls of the container. The more molecules there are, the more collisions there will be, and the greater the pressure will be. However, if the volume of the container is decreased, there will be less space for the molecules to move around in, so they will collide more frequently with the walls of the container, resulting in a higher pressure.
In contrast, the mass of the individual gas molecules, the centigrade temperature of the gas, and the fahrenheit temperature of the gas do not have a direct effect on the pressure exerted by the gas on its container. These factors may affect other properties of the gas, such as its density or its behavior under different conditions, but they are not directly related to Boyle's Law. Similarly, the number of molecules of gas in the sample may affect the pressure of the gas, but only insofar as it affects the volume of the container, which is the primary determinant of pressure in Boyle's Law.

for more such questions on volume

https://brainly.com/question/29796637

#SPJ11

How many electron pairs are shared (i.e., how many bonds are present) in each of the following molecules and ions?
1. CO
2. O2
3. ClO
4. CN

Answers

1. CO: 3 electron pairs are shared.
2. O₂: Two electron pairs are shared.
3. ClO: 1 electron pair is shared.
4. CN: Three electron pairs are shared.

Here's the information about the shared electron pairs (bonds) in each of the molecules and ions:


1. CO - Carbon Monoxide has a triple bond between C and O, which means 3 electron pairs are shared.
2. O₂ - Oxygen molecule has a double bond between the two O atoms, which means 2 electron pairs are shared.
3. ClO - Chlorine Monoxide has a single bond between Cl and O, which means 1 electron pair is shared.
4. CN - Cyanide ion has a triple bond between C and N, which means 3 electron pairs are shared.

For more such questions on Electron pairs.

https://brainly.com/question/18651326#

#SPJ11

What is the concentration of K^+ in 0. 15 M of K_2 S?

Answers

The molar concentration of [tex]K^+[/tex] in 0.15 M of [tex]K_2S[/tex] is 0.30 M.

The molar concentration is defined as the number of moles in one liter of solution. It has a unit of Molar or M.  

The molar concentration of the solution is 0.15 M. It gives the following ions in an aqueous solution.

[tex]K_2S[/tex] --------> [tex]2K^+[/tex] + [tex]S^{2+[/tex]

The molar concentration of the ions can be calculated by multiplying the stoichiometric coefficient of the ion

Thus, the molar concentration of the ion [tex]S^{2-[/tex] = 0.15

= 0.15 M

Thus, the molar concentration of the ion [tex]K^+[/tex] = 2 * 0.15

= 0.30 M

0.30 M is the molar concentration of ions of potassium.  

Learn more about Molar concentration:

https://brainly.com/question/29366031

#SPJ4

A chemist places CaCO3 in one flask and KBr in another. Water is added to both flasks and the mixture in the first flask is added to the second. Which choice below correctly describes the results of this experiment?
Question 1 options:
Both of the compounds in the flasks will dissolve when water is added and K2CO3 will precipitate from the reaction.
Both of the compounds in the flasks will dissolve when water is added and CaBr2 will precipitate from the reaction.
The CaCO3 will not dissolve in water, but the KBr will dissolve. There is no change upon mixing the two flasks.
The KBr will not dissolve in water, but the CaCO3 will dissolve. There is no change upon mixing the two flasks.
Both of the compounds in the flasks will dissolve when water is added and there is no precipitate from the reaction.

Answers

The correct choice is: The CaCO3 will not dissolve in water, but the KBr will dissolve. There is no change upon mixing the two flasks.

This is because calcium carbonate (CaCO3) is insoluble in water, while potassium bromide (KBr) is soluble in water. When water is added to the flask containing CaCO3, it will not dissolve, and the same will happen when water is added to the flask containing KBr. When the two mixtures are combined, there will be no reaction between the two compounds, so no precipitate will form. Therefore, the only compound remaining in the solution will be KBr.

Learn more about calcium carbonate here:

https://brainly.com/question/13565765

#SPJ11

In a many-electron atom, only the electrons at the ______ level will participate in covalent bonding.

Answers

In a many-electron atom, only the electrons at the outermost energy level will participate in covalent bonding.

The valence shell is the outermost energy level of an atom. It contains the electrons that are most likely to be involved in chemical interactions, such as covalent bonding. Covalent bonding occurs when two atoms share one or more electrons in order to achieve a more stable electron configuration. The electrons in the valence shell of each atom are the ones that are shared in this process. Therefore, only the electrons in the valence shell of a many-electron atom will participate in covalent bonding.

To learn more about covalent bonding click here https://brainly.com/question/14509196

#SPJ11

What is the written formula for Manganese (IV) nitrate?

Answers

The written formula for Manganese (IV) nitrate is Mn(NO₃)₄.



In this formula, Manganese (Mn) has a +4 charge (indicated by the Roman numeral IV) and Nitrate (NO₃) has a -1 charge.

To create a neutral compound, we need four nitrate ions to balance the +4 charge of Manganese.

Therefore, we write the formula as Mn(NO₃)₄.



Hence, The written formula for Manganese (IV) nitrate is Mn(NO₃)₄, which consists of one Manganese ion with a +4 charge and four nitrate ions, each with a -1 charge, to form a neutral compound.

learn more about Manganese click here:

https://brainly.com/question/28533522

#SPJ11

3. Which reaction is only experimental?
Fission
Fusion
Both

Answers

Nuclear fission is only experimental however, nuclear fusion is not experimental.

What are Nuclear fission and Fusion?

Fission generates energy by breaking heavier atoms, such as uranium, into smaller atoms like iodine, cesium, strontium, xenon, and barium, to mention a few.

Fusion, on the other hand, is the joining of light atoms, such as two hydrogen isotopes.

Both are nuclear reactions that generate energy, but they are not the same. Fusion is the joining of two light nuclei to create a larger nucleus, whereas fission is the breaking of a heavy nucleus into two lighter ones.

Learn more about Nuclear fission and Fusion here:
https://brainly.com/question/3992688

#SPJ1

Consider the titration of 50. 0 ml of 0. 318 m weak base b (kb = 7. 5 x 10⁻⁶) with 0. 340 m hno₃. What is the ph of the solution before any strong acid has been added? b After 30. 0 mL of HNO: have been added, identify the primary species left in the solution

Answers

The pH of the solution before the addition of any strong acid is 12 and the primary species left in the solution are mixture of the weak base and conjugate acid.

a) Before any strong acid has been added, the solution contains only the weak base B. To find the pH of the solution, we can use the expression for the base dissociation constant:

Kb = [BH⁺][OH⁻]/[B]

At equilibrium, we can assume that [OH⁻] ≈ [BH⁺], since the base is weak and only partially dissociates. Therefore:

Kb = [OH⁻]²/[B]

[OH⁻]² = Kb[B]

[OH⁻] = √(Kb[B]) = √(7.5×10⁻⁶ mol/L × 0.318 L) ≈ 5.4×10⁻³ mol/L

Since Kw = [H⁺][OH⁻], we can find the [H⁺] concentration:

Kw = [H⁺][OH⁻]

[H⁺] = Kw/[OH⁻]

= 1.0×10⁻¹⁴ mol²/L² ÷ 5.4×10⁻³ mol/L

≈ 1.9×10⁻¹² mol/L

The pH of the solution is then:

pH = -log[H⁺] ≈ 12

The pH of the solution is therefore roughly 12 prior to the addition of any strong acids.

b) After adding 30.0 mL of HNO₃, we have added:

n(HNO₃) = C(V) = 0.340 mol/L × 0.0300 L = 0.0102 mol

Since the base is weak, we can assume that all of the added HNO₃ reacts with the base, and that the solution is still basic. The base will be partially neutralized to form the conjugate acid BH⁺, which is also weak. The primary species left in the solution will be a mixture of the weak base B, its conjugate acid BH⁺, and any excess HNO₃ that has not reacted with the base.

To know more about pH value, visit,

https://brainly.com/question/26424076

#SPJ4

A photon of ultraviolet light has 5.6610-
18 J of energy. (a) What is the frequency of
the ultraviolet light? (b) What is the
wavelength?

Answers

a) The frequency of ultraviolet light is 8.54 * 10^{15} Hz

b) The wavelength of ultraviolet light is 35 nm

To solve for the frequency of ultraviolet light, we can use the equation E = hf, where E is the energy of the photon, h is Planck's constant, and f is the frequency of the photon. Rearranging the equation, we get f = E/h. Plugging in the given values, we get

f = \frac{(5.6610-18 J)}{(6.62607015 * 10^{-34} J s)

f = 8.54 * 10^{15} Hz.
To solve for the wavelength of ultraviolet light, we can use the equation c = λf, where c is the speed of light, λ is the wavelength, and f is the frequency. Rearranging the equation, we get λ = \frac{c}{f}. Plugging in the given values and the speed of light (299,792,458 m/s), we get

λ = \frac{(299,792,458 m/s)}{(8.54 * 10^{15} Hz)

λ= 35 nm (nanometers).
In summary, the frequency of ultraviolet light with a photon energy of 5.6610-18 J is 8.54 * 1015 Hz, and the corresponding wavelength is 35 nm. Ultraviolet light has a shorter wavelength and higher frequency than visible light, making it more energetic and potentially harmful to living organisms.

learn more about Ultraviolet light refer: https://brainly.com/question/28883964

#SPJ11

Energy is the ________.
A) work that has been done
B) motion that moves things
C) amount remaining to do work in the future
D) capacity to do work
E) chemical bonds between atoms and molecules

Answers

Energy is the capacity to do work. Therefore the correct option is option D.

A force acting over a distance is what is meant by the term "work" in physics. Energy is the capacity to exert a force across a distance or to perform labour.

Kinetic energy (energy of motion), potential energy (energy held in an object due to its position or state), thermal energy (energy resulting from the motion of atoms and molecules), and electromagnetic energy (energy carried by electromagnetic waves, such as light) are only a few examples of the various forms that energy can take.

Even though it might be connected to an object's motion, energy is not the same as actual motion. Chemical bonds between atoms and molecules can also be related to energy because they need energy to be released or input in order to break or form. Therefore the correct option is option D.

For such more question on Energy:

https://brainly.com/question/29339318

#SPJ11

true or false,an orbital is a probability map showing exactly where an electron can be found in an atom.

Answers

True, an orbital is a probability map showing exactly where an electron can be found in an atom. In an atom, electrons reside in specific regions called orbitals. These orbitals describe the probability distribution of an electron's position in a three-dimensional space around the nucleus of the atom. An orbital does not show the exact path or trajectory of an electron, but it provides a representation of the regions where an electron is most likely to be found.

There are various types of orbitals, such as s, p, d, and f orbitals, which differ in their shapes and energies. Electrons within these orbitals are organized into energy levels or shells. As you move away from the nucleus, the energy levels and the number of electrons in each shell increase. The distribution and arrangement of electrons in orbitals play a vital role in determining the chemical and physical properties of an atom.
In summary, an orbital represents a probability map that indicates the most likely locations for an electron within an atom, providing valuable information about the atom's structure and behavior.

For more information on energy levels see:

https://brainly.com/question/29736874

#SPJ11

4. Which type of nuclear reaction has the reactants with a greater mass than the products?
Fusion
Fission

Answers

Answer:

NUCLEAR FISSION

Explanation:

According to Einstein's equation, E = mc2, where

m

is the mass and

c

is the speed of light states that mass can be converted to energy and vice-versa. In nuclear fission, the mass of reactants is more than mass of the products. The difference in mass is called the mass defect. This mass is converted into energy

What happens if an air conditioner is used in a house that is not well insulated and not well sealed?

Answers

Several problems can happen if an air conditioner is operated in a house that is not properly sealed and insulated.

Higher energy costs may result from the air conditioner having to work harder to maintain the intended temperature.

Through fractures, gaps, and inadequately insulated walls, the cold air generated by the air conditioner may escape the home, causing uneven cooling and discomfort for the residents.

Learn more about air conditioner at:

https://brainly.com/question/13143746

#SPJ1

Given the following nucleoside or nucleotide, identify the correct name or abbreviation.cytidine deoxyuridine uridine CDP deoxycytidine

Answers

The specific names and abbreviations of nucleosides and nucleotides depend on the specific nitrogenous base and sugar present, all the answers are below:

Cytidine is a nucleoside composed of the pyrimidine base cytosine and the five-carbon sugar ribose. Deoxyuridine is a nucleoside composed of the pyrimidine base uracil and the sugar deoxyribose. Uridine is a nucleoside composed of the pyrimidine base uracil and the sugar ribose. CDP, or cytidine diphosphate, is a nucleotide composed of the nucleoside cytidine, two phosphate groups, and one diphosphate group. Deoxycytidine is a nucleoside composed of the pyrimidine base cytosine and the sugar deoxyribose.In summary, nucleosides are composed of a nitrogenous base and a sugar molecule, while nucleotides are composed of a nucleoside, one or more phosphate groups, and other functional groups. The specific names and abbreviations of nucleosides and nucleotides depend on the specific nitrogenous base and sugar present.

For more such question on abbreviations

https://brainly.com/question/14587349

#SPJ11

Other Questions
Consider the polynomial function f(x) - x4 -3x3 + 3x2 whose domain is(-[infinity], [infinity]). (a) Find the intervals on which f is increasing. (Enter you answer as a comma-separated list of intervals. ) Find the intervals on which f is decreasing. (Enter you answer as a comma-separated list of intervals. ) (b) Find the open intervals on which f is concave up. (Enter you answer as a comma-separated list of intervals. ) Find the open intervals on which f is concave down. (Enter you answer as a comma-separated list of intervals. ) (c) Find the local extreme values of f. (If an answer does not exist, enter DNE. ) local minimum value local maximum value Find the global extreme values of f onthe closed-bounded interval [-1,2] global minimum value global maximum value (e) Find the points of inflection of f. Smaller x-value (x, f(x)) = larger x-value (x,f(x)) = find the minimum sample size when we want to construct a 95% confidence interval on the population proportion for the support of candidate a in the following mayoral election. candidate a is facing two opposing candidates. in a preselected poll of 100 residents, 22 supported candidate b and 14 supported candidate c. the desired margin of error is 0.06. If an employee is transferred to a distant location for an indefinite period of time, the new location typically will be considered the employee's new tax home.A. TrueB. False" 83. Responsibility for orientation is usually shared between the human resource department and the immediate supervisor. True False Two concentric circles form a target. The radii of the two circles measure 8 cm and 4 cm. The inner circle is the bullseye of the target. A point on the target is randomly selected.What is the probability that the randomly selected point is in the bullseye?Enter your answer as a simplified fraction in the boxes. complete the sentences by matching the phrases to correctly describe the relationship between changes in sea level and glaciation. which of the following is not involved with or an outcome of crossing over? chiasmata indicate where crossing over is occurring between homologs the random assortment of homologous pairs of chromosomes at metaphase i formation of chromosomes containing paternal and maternal alleles the dna in two non-sister chromatids is broken by specific proteins at exact points Every number has only one quality: its distance from zero.O A. TrueOB. False a researcher finds that the average monthly hamburger consumption is 5.25 hamburgers per month, 95% ci [2.34, 7.89]. describe in your own words what this confidence interval means in regards to the population mean. }); ifA student is studying the wave different elements are similar to one wAtemNUMPA199Atem adicesAtom 2NQAlam 4Which two atoms are of elements in the same group in the periodic table? PLEASE HELP (WILL GIVE BRAINLIEST) You are getting ready to retire and are currently making $79,000/year. According to financial experts quoted In the lesson, what is the minimum that you should have saved in retirement accounts if this is your salary? Show all your work The most common shape requiring a centerline is _____. which of the following are considered fixed costs? question 15 options: sales commissions shipping costs supplies wages The dog shelter has Labradors, Terriers, and Golden Retrievers available for adoption. If P(terriers) = 15%, interpret the likelihood of randomly selecting a terrier from the shelter. Likely Unlikely Equally likely and unlikely This value is not possible to represent probability of a chance event Find an equation of the tangent plane to the given surface at the specified point.z=2(x-1)^2 + 6(y+3)^2 +4, (3,-2,18) g give an example of a project where work sampling would be an appropriate productivity measuring technique. John purchased stock on 7/11/21 for $1,000. He sells the stockfor $4,000 on 12/30/21. What is his gain on this transaction?$3,000 1231 Gain$3,000 Ordinary Gain$3,000 Short Term C Multiply: 7/11 x 1 1/6 A portable power source is available for travelers who need electricity forappliances. The power scurce provides 54 W of power to operate an aircompressor for inflating tires. This compressor draws 4.5 A of current whenconnected to the power supply. What is the voltage across the compressor?