given 7.00 g of butanoic acid and excess ethanol, how many grams of ethyl butyrate would be synthesized, assuming a complete 100 % yield?

These are all examples of chemical hazardous waste. Chemical hazardous waste is waste that is flammable, reactive, corrosive, or toxic. It can include things like unused pesticides, paint, cleaning products, or batteries.

Old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of Household hazardous waste.What is hazardous waste?Hazardous waste is a waste material that is harmful to human health or the environment. Every year, households and businesses generate hazardous waste in various forms. Because hazardous waste may be flammable, poisonous, reactive, or corrosive, it requires special disposal procedures. Hazardous wastes must be properly disposed of to safeguard human health and the environment.Household hazardous waste (HHW) is the type of waste that can be found in a typical home. This waste is produced by households when they use products that contain harmful chemicals. Old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of household hazardous waste.

For more such questions on hazardous waste

https://brainly.com/question/4055432

#SPJ11

The pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH can be calculated as follows:

Let's understand this step-by-step:

1. HCl is an acid, while NaOH is a base. When an acid and a base react, they undergo a neutralization reaction, forming salt and water. The balanced chemical equation for the reaction between HCl and NaOH is:

HCl + NaOH → NaCl + H2O

This equation shows that 1 mole of HCl reacts with 1 mole of NaOH to produce 1 mole of NaCl and 1 mole of water.

Using the volumes and concentrations given in the question, we can calculate the moles of HCl and NaOH as follows: moles of HCl = 35.00 mL × 0.250 mol/L = 0.00875 mol

moles of NaOH = 35.00 mL × 0.125 mol/L = 0.004375 mol

The reaction between HCl and NaOH is 1:1, so the limiting reactant is NaOH because it has fewer moles. Therefore, all the NaOH will be used up, leaving some HCl unreacted. The number of moles of HCl that remain after the reaction is equal to the initial number of moles of HCl minus the number of moles of NaOH used up:

mol of HCl remaining = 0.00875 mol - 0.004375 mol = 0.004375 mol

The total volume of the solution is the sum of the volumes of the acid and the base:

Vtotal = Vacid + Vbase

Vtotal = 35.00 mL + 35.00 mL = 70.00 mL = 0.07000 L

The concentration of HCl in the solution is calculated using the number of moles of HCl remaining and the total volume of the solution:

[HCl] = mol of HCl remaining / Vtotal

[HCl] = 0.004375 mol / 0.07000 L

[HCl] = 0.0625 M

The pH of the solution can be calculated using the equation:

pH = -log[H+]

The concentration of H+ in the solution is equal to the concentration of HCl, so:

[H+] = [HCl] = 0.0625 M

Substituting this value into the pH equation:

pH = -log[H+]pH = -log(0.0625)pH = 1.20Therefore, the pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH is 1.20.

Learn more about pH: What is the approximate ph of a solution if the concentration of hydrogen ions is 5. 0 × 10–4 moles per liter? https://brainly.com/question/26424076

#SPJ11

1. The heat of reaction for the given chemical equation is -522.1 kJ/mole.

2. The heat of reaction for the given chemical equation is -3327.1 kJ/mole.

3. The heat of reaction for the given chemical equation is -1161.5 kJ/mole.

1. N₂H₄(1) + O₂(g) →N₂(g) + 2 H₂O(1)

The balanced chemical equation for the reaction is:

N₂H₄(1) + O₂(g) → N₂(g) + 2 H₂O(1)

To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:

ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.

Using the given standard enthalpies of formation, we get:

ΔH°rxn = [0 - 2(-285.9 kJ/mole) + 50.6 kJ/mole] - [1(0) + 1(-50.6 kJ/mole)]

ΔH°rxn = -572.7 kJ/mole + 50.6 kJ/mole

ΔH°rxn = -522.1 kJ/mole

Therefore, the heat of reaction for the given chemical equation is -522.1 kJ/mole.

2. C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)

The balanced chemical equation for the reaction is:

C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)

To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:

ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.

Using the given standard enthalpies of formation, we get:

ΔH°rxn = [3(-393.5 kJ/mole) + 3(-285.9 kJ/mole)] - [1(-249.5 kJ/mole) + 4(0)]

ΔH°rxn = -3576.6 kJ/mole + 249.5 kJ/mole

ΔH°rxn = -3327.1 kJ/mole

Therefore, the heat of reaction for the given chemical equation is -3327.1 kJ/mole.

3. CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)

The balanced chemical equation for the reaction is:

CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)

To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:

ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively.

Using the given standard enthalpies of formation, we get:

ΔH°rxn = [1(-393.5 kJ/mole) + 2(-296.8 kJ/mole)] - [1(177.4 kJ/mole) + 1(0)]

ΔH°rxn = -984.1 kJ/mole - 177.4 kJ/mole

ΔH°rxn = -1161.5 kJ/mole

Therefore, the heat of reaction for the given chemical equation is -1161.5 kJ/mole.

learn more about heat of reaction: https://brainly.com/question/11631046

#SPJ1

Safety precautions to be taken while performing the calorimetry experiment, some safety precautions are necessary, such as the following : -

1. In calorimetry experiments, extreme caution should be taken when using open flames or heat sources such as bunsen burners, which may cause burns or other accidents.

2. During experiments, safety glasses or goggles must be worn at all times to prevent chemical splashes from entering the eyes.

3. When handling any chemicals, be sure to wash your hands thoroughly before and after handling them to prevent any potential exposure or cross-contamination.

4. Always double-check the correct usage of the calorimeter and its components before proceeding with the experiment.

5. The calorimeter should not be kept near the edge of the bench or work surface to avoid unintentional falls or damage to the instrument.

6. A well-ventilated area should be chosen for the experiment because some chemicals may produce fumes or gases.

Calorimetry is a method of determining the amount of heat released or absorbed by a reaction in question. In this experiment.

Know more about Calorimetry here:

https://brainly.com/question/11477213

#SPJ11

We just use molar mass for FeF3 (129.9 g/mol) to calculate the number  moles in 3.5grammes of FeF3. Hence, just 3.5 x 129.9 = 4546.5 moles of FeF3 need to be multiplied.

An object's mass is determined by how much matter it has. Something that has more substance will weigh heavier overall. For instance, because an elephant contains more stuff than a mouse does, it has a heavier mass.

55.8+3⋅19=116 g/mole24 g116 g/mol=0.207 moles of FeF3

0.207 moles×6.022×23molecules/mole=1.2×1023molecules

A thing's mass is how much matter it contains. Using a balance, scientists frequently determine mass. A beam balance or perhaps an electronic balance can be used to measure the mass of solids directly. Measure a liquid's volume, then use the density table to determine the liquid's mass.

To know more about mass  visit:

https://brainly.com/question/15959704

#SPJ1

The original volume of the container is 5.40 L.

The given final volume of a container when heated is 15.5 L. The container expands when heated from 159 K to 456 K.  

The formula used to solve this problem is:

V1 = (V2 × T1) / T2

V1 is the original volume of the container

V2 is the final volume of the container

T1 is the final temperature of the container

T2 is the initial temperature of the container

Let's substitute the given values in the above formula:

V1 = (15.5 × 159) / 456V1 = 5.40 L

Therefore, the original volume of the container is 5.40 L.

To know more about original volume click here:

https://brainly.com/question/12014506

#SPJ11

The phrase "survival of the fittest," popularised in Charles Darwin's fifth edition of On the Origin of Species (published in 1869), argued that animals most adapted to their environment have the best chances of surviving.

The environment and its conditions are continually changing, and the fittest individuals must generate even more fit offspring in order to ensure their survival. Here is when evolution comes into play.

An evolutionary mechanism is natural selection. Environment-adapted organisms have a higher chance of surviving and dispersing the genes that contributed to their success.

To know more about Charles Darwin's visit:-

brainly.com/question/13428382

#SPJ9

The molarity of the commercial vinegar is 0.833 M.

To calculate the molarity of the commercial vinegar, we need to know the formula of acetic acid, which is CH3COOH. Then, we need to convert the percentage w/v to grams per liter (g/L) by assuming 100 mL of solution.

Finally, we can use the formula of molarity to calculate the concentration of acetic acid in moles per liter (mol/L). Here are the steps:

Step 1: Determine the formula of acetic acid (CH3COOH).

Step 2: Convert the percentage w/v to g/L by assuming 100 mL of solution.5.0% w/v = 5.0 g/100 mL = 50 g/L

Step 3: Calculate the molar mass of acetic acid. C = 12.01 g/mol, H = 1.01 g/mol, O = 16.00 g/mol.Molar mass = (2 x C) + (4 x H) + (2 x O) = 60.05 g/mol

Step 4: Calculate the number of moles of acetic acid in 1 L of solution.Number of moles = mass / molar massNumber of moles = 50 g / 60.05 g/mol = 0.8327 mol

Step 5:Calculate the molarity of the solution.Molarity = number of moles / volume Molarity = 0.8327 mol / 1 L = 0.833 M

Therefore, the molarity of the commercial vinegar is 0.833 M.

To know more about acetic acid click on below link:

https://brainly.com/question/15202177#

#SPJ11

The concentration of the HBr solution is 0.125 M.

The given solution is a 53.65 ml solution of HBr that is completely titrated by 33.50 ml of a 0.200 M NaOH solution.

This implies that all of the HBr present in the solution is neutralized by NaOH, and therefore, the number of moles of HBr is equal to the number of moles of NaOH.

The balanced chemical equation for the reaction:HBr(aq) + NaOH(aq) → NaBr(aq) + H2O(l)The stoichiometric ratio of HBr to NaOH in this reaction is 1:1.

This means that one mole of HBr reacts with one mole of NaOH to form one mole of NaBr and one mole of water.

We can use the given information to determine the number of moles of NaOH that were required to neutralize the HBr. The molarity of the NaOH solution is given as 0.200 M.

This means that there are 0.200 moles of NaOH in every liter of solution.

Therefore, the number of moles of NaOH used in the titration is:moles of NaOH = molarity × volume in liters= 0.200 M × (33.50/1000) L= 0.0067 mol

Since the stoichiometric ratio of HBr to NaOH is 1:1, the number of moles of HBr that were neutralized by the NaOH is also 0.0067 mol.

This means that the concentration of the HBr solution can be calculated as follows:concentration of HBr = moles of HBr / volume of HBr solution in liters= 0.0067 mol / (53.65/1000) L= 0.125 M

to know more about solution refer here:

https://brainly.com/question/30665317#

#SPJ11

True, a saturated hydrocarbon has the maximum amount of hydrogens attached to the carbon skeleton.

Hydrocarbons are organic molecules that are made up of only carbon and hydrogen atoms. They may be composed of chains of various lengths, rings of various sizes, or a combination of both. The simplest hydrocarbons, such as methane (CH4), ethane (C2H6), and propane (C3H8), are gaseous at room temperature, whereas larger hydrocarbons are liquids, such as hexane (C6H14), or solids, such as hexadecane (C16H34).

Unsaturated hydrocarbons have carbon-carbon double or triple bonds in their structures, indicating that they are not completely saturated with hydrogen atoms. These hydrocarbons are commonly referred to as alkenes or alkynes, respectively. Alkenes have one double bond, whereas alkynes have one triple bond.

Read more about hydrocarbon :

https://brainly.com/question/22047391

#SPJ11

The ability of open systems to fight off deterioration, sustain themselves and grow is Negative Entropy. Correct answer is option C

Negative Entropy is an important concept in thermodynamics and physics, where it is defined as a decrease in the entropy of a system. Entropy is the measure of randomness or disorder in a system, so negative entropy indicates that a system is becoming more organized, or that it is moving away from equilibrium.

This can be seen in the evolution of life, where species become more complex and adaptive over time, as well as in the growth of technology, where innovations allow us to become more efficient and productive. In essence, Negative Entropy is the power that allows open systems to improve and evolve. Therefore Correct answer is option C

Know more about thermodynamics here:

https://brainly.com/question/1368306

#SPJ11

1) You know the number of moles, you can easily work out the molar mass of Ti(SO3)2 (titanium sulfite), but you don't know the actual mass

2) By adding the mass of the atoms that make up titanium sulfite, you should get something like 207.9934 g/mol

3) To find the actual mass, you times the molar mass and the moles together

Final Answer = 193g

Adding a small amount of acid to a buffer does not change the pH because the weak acid is quickly neutralized by the weak base present in the buffer.

The reaction forms new components which are able to absorb further amounts of acid or base, keeping the pH relatively constant.

However, adding a large amount of acid to the buffer can change the pH because it exceeds the capacity of the buffer to neutralize it. This will result in the pH becoming more acidic.

The buffer is composed of a weak acid and its conjugate base. When a small amount of acid is added to the buffer, the weak acid is quickly neutralized by the weak base, forming new components that are able to absorb additional amounts of acid or base.

This means that the pH of the buffer remains relatively constant, even when small amounts of acid or base are added.

However, when a large amount of acid is added to the buffer, it exceeds the buffer’s capacity to neutralize it.

This results in the pH becoming more acidic, as the acid molecules outnumber the molecules of the weak base in the buffer. The pH will only return to its original value when the buffer has been ‘recharged’ with the weak base.

To know more about pH click on below link:

https://brainly.com/question/15289741#

#SPJ11

The density of the metal is 1.167 g/ml.

The density of the metal can be calculated using the formula for density, ρ:

ρ = m /v

where ρ is the density, m is the mass, and v is the volume.

In this case, the mass of the metal is 31.5g and the volume can be determined by subtracting the initial volume (51mL) from the final volume (78mL) of water in the graduated cylinder. Thus, the volume of the metal is 27mL.

Using the formula, the density of the metal is then:

ρ = 31.5 g / 27mL

ρ = 1.167 g/ml

This means that 1 mL of the metal has a mass of 1.167g. Density is an important property of materials, as it affects other properties such as buoyancy. Generally, materials with a higher density will sink in a liquid, while those with a lower density will float.

Learn more about density here: https://brainly.com/question/1354972.

#SPJ11

The given statement "at a given temperature and pressure, the volume of a gas is directly proportional to the amount of gas present" is a rephrasing of Avogadro's law.

Avogadro's law is a gas law named after Amedeo Avogadro, an Italian scientist who first presented it in 1811. It states that "equal volumes of all gases, at the same temperature and pressure, have the same number of molecules.

This means that if the amount of gas present is doubled, the volume will also double, provided that the temperature and pressure remain the same.

Therefore, at a given temperature and pressure, the volume of a gas is directly proportional to the amount of gas present. This is a statement of Avogadro's Law.

To know more about Avogadro's law click here:

https://brainly.com/question/3491421

#SPJ11

The pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added is approximately 4.69.

The pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added can be calculated using the following steps:

1. Calculate the moles of acetic acid (CH₃COOH) and sodium hydroxide (NaOH) before the reaction:

- Moles of CH₃COOH = volume × concentration

= 25.0 mL × 0.365 mol/L

= 9.125 mmol

- Moles of NaOH = volume × concentration

= 10.3 mL × 0.432 mol/L = 4.4456 mmol

2. Determine the moles of acetic acid and sodium hydroxide remaining after the reaction: Since acetic acid and sodium hydroxide react in a 1:1 ratio, the limiting reactant will be NaOH.

- Moles of CH₃COOH remaining = 9.125 mmol - 4.4456 mmol = 4.6794 mmol - Moles of NaOH remaining = 0 mmol (all NaOH is consumed in the reaction)

3. Calculate the concentration of acetic acid and acetate ion (CH₃COO-) after the reaction:

- [CH₃COOH] = moles of CH₃COOH remaining / total volume

= 4.6794 mmol / (25.0 mL + 10.3 mL)

= 0.12998 mol/L

- [CH₃COO-] = moles of NaOH consumed / total volume

= 4.4456 mmol / (25.0 mL + 10.3 mL)

= 0.12346 mol/L

4. Calculate the pH using the Henderson-Hasselbalch equation:

pH = pKa + log([CH₃COO-] / [CH₃COOH]) pKa of acetic acid is 4.76, so:

pH = 4.76 + log(0.12346 / 0.12998) ≈ 4.69

Therefore, the pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added is approximately 4.69.



Learn more about titration here:
https://brainly.com/question/2728613#



#SPJ11

The partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.

The partial pressure of a gas in a mixture is equal to the mole fraction of that gas times the total pressure of the mixture.

The mole fraction of Ar in this mixture is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.

The ideal gas law states that the pressure of a gas is directly proportional to its number of moles and inversely proportional to its volume.

This law is expressed in the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

In a mixture of gases, each gas behaves independently according to the ideal gas law. Thus, the total pressure of the mixture is the sum of the partial pressures of each gas.

The partial pressure of a gas is equal to its mole fraction times the total pressure. The mole fraction of a gas is the number of moles of that gas divided by the total number of moles of all gases in the mixture.

In the example provided, the total pressure of the mixture is 1,380 mmHg, the number of moles of CO2 is 1.27, the number of moles of CO is 3.04, and the number of moles of Ar is 1.50.

The total number of moles of all gases in the mixture is 1.27 + 3.04 + 1.50 = 6.81. The mole fraction of Ar is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.

To  know more about partial pressure refer here:

https://brainly.com/question/13199169#

#SPJ11

Since we do not know the specific buffer from part a, we cannot determine the exact value of pKa or the initial concentrations of A- and HA.  We cannot provide a numerical value for the pH of the buffer after the addition of 0.150 mol of HCl.

What is Acid?

An acid is a substance that donates hydrogen ions (H+) or protons in a chemical reaction. In other words, acids are compounds that have a pH less than 7 and can increase the concentration of H+ ions in a solution.

When 0.150 mol of HCl is added to a buffer solution, it will react with the buffer components to form their conjugate acid and the chloride ion. Since the volume of the buffer solution is assumed to remain constant, the concentration of the buffer components will not change significantly.

Let's assume that the buffer contains a weak acid, HA, and its conjugate base, A-. The dissociation reaction for the weak acid is:

HA + H2O ⇌ H3O+ + A-

Ka = [H3O+][A-]/[HA]

At equilibrium, the pH of the buffer is given by:

pH = pKa + log([A-]/[HA])

When HCl is added to the buffer, it will react with A- to form HCl(aq) and HA(aq). The amount of A- that reacts with HCl is equal to the amount of HCl added, which is 0.150 mol in this case. This will cause a decrease in the concentration of A- and an increase in the concentration of HA.

The new concentrations of A- and HA can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

Before the addition of HCl, the concentrations of A- and HA are given by:

[A-]0 and [HA]0

After the addition of HCl, the concentrations of A- and HA become:

[A-] = [A-]0 - 0.150 mol

[HA] = [HA]0 + 0.150 mol

pH = pKa + log(([A-]0 - 0.150 mol)/([HA]0 + 0.150 mol))

Learn more about Acid from given link

https://brainly.com/question/25148363

#SPJ1

Carbon dioxide (CO2) is a gas that is slightly soluble in water. As the temperature of water increases, the solubility of CO2 decreases.

This is due to the fact that, as temperature increases, the amount of dissolved CO2 gas in water decreases.

This phenomenon is known as Henry's law, which states that the solubility of a gas in a liquid is proportional to the partial pressure of the gas above the liquid.

As temperature increases, the partial pressure of CO2 gas above the liquid increases, causing its solubility to decrease.

The solubility of CO2 gas in water is also affected by pH. In general, as the pH of water decreases, the solubility of CO2 in water increases.

This is because the solubility of CO2 in water is reduced by the presence of bicarbonate ions, which are created by the dissociation of carbonic acid, a weak acid.

As the pH decreases, the amount of bicarbonate ions in solution decreases, which in turn increases the solubility of CO2.

The solubility of CO2 gas in water decreases as temperature increases and pH decreases. As temperature increases, the partial pressure of CO2 above the liquid increases, resulting in decreased solubility.

As the pH of water decreases, the solubility of CO2 increases due to the decreased amount of bicarbonate ions in solution.

To know more about carbon dioxide  refer here:

https://brainly.com/question/3049557#

#SPJ11

The half-life of the reaction with an initial concentration of 0.050 m is 16.9 minutes,

which is longer than the half-life of 10.0 minutes when the initial concentration was 0.250 m.

The half-life of a second-order reaction depends on the initial reactant concentration.

When the initial concentration of a reactant is higher, the half-life of the reaction will be shorter; when the initial concentration of a reactant is lower, the half-life of the reaction will be longer.

Therefore, if a second-order reaction has a half-life of 10.0 minutes when the initial reactant concentration is 0.250 m, the half-life when the initial concentration is 0.050 m would be longer than 10.0 minutes.

To determine the exact half-life of the reaction with the lower initial concentration, we can use the integrated rate law for a second-order reaction:

ln[A]t = -kt + ln[A]0

In this equation, A

is the initial concentration of the reactant; and k is the reaction rate constant.

The half-life of the reaction with an initial concentration of 0.050 m, we can rearrange the equation to solve for t, the time in which the reactant concentration decreases to half of the initial concentration:

t = -(1/k) ln[0.5A0]

The initial concentration of 0.050 m, solve for t to get the half-life of the reaction with the lower initial concentration:

t = -(1/k) ln[0.5(0.050)] = 16.9 minutes

Therefore, the half-life of the reaction with an initial concentration of 0.050 m is 16.9 minutes, which is longer than the half-life of 10.0 minutes when the initial concentration was 0.250 m.

to know more about half-life refer here:

https://brainly.com/question/24710827#

#SPJ11

1. I modeled a decomposition reaction.

2. used hydrogen peroxide (H2O2) as the compound for the reaction.

3. The reaction is exothermic. This is because the decomposition of hydrogen peroxide releases heat and energy, which can be observed through the effervescence or bubbling of the solution.

4. I recorded a video demonstrating the experiment and the resulting reaction.

5. A closed system is suitable for this reaction because it follows the law of conservation of mass, which states that mass cannot be created or destroyed, only transferred or transformed.

6. The potential energy diagram for this reaction would show the reactants at a higher energy level (400 KJ) and the products at a lower energy level (200 KJ), with the difference in energy being released as heat and energy.

7. The reaction is exothermic because it releases heat and energy, as observed through the effervescence or bubbling of the solution.

8. Factors that could affect the reaction rate include temperature, catalysts, and concentration of the reactants.

What is decomposition reaction?

A decomposition reaction is a type of chemical reaction in which a compound breaks down into two or more simpler substances. This type of reaction usually requires the addition of energy, such as heat or light, to break the bonds holding the compound together.

To know more about decomposition reaction, visit:

https://brainly.com/question/16987748

#SPJ1

The extremophile sulfolobus acidicaldonius survives under high acidity and high temperature.

Thus, the correct answers are high temperature and high acidity (A and E).

A thermoacidophile species, such as Sulfolobus acidocaldarius, belong to the archaea phylum and is resistant to both high temperatures and highly acidic conditions. The adaptions of this species include that the optimal pH of its enzyme will lie below pH 7, since those are acidic conditions. Also, thermoacidophile species can inhabit hydrothermal springs, since they can live in high-temperature conditions.

Your question is incomplete, but most probably your options were

A. high temperature

B. low pressure

C. low oxygen

D. high alkalinity

E. high acidity

Thus, the correct options are A and E.

For more information about sulfolobus acidicaldonius refers to the link: https://brainly.com/question/15874458

#SPJ11

The molecular formula of the chemical substance is C4H8.

The empirical formula of a chemical substance, CH2, and its molar mass of 56.108 g/mol can be used to calculate the molecular formula of the substance.

In order to do this, we need to divide the molar mass by the empirical formula mass. The empirical formula mass for CH2 is 12.011 g/mol, so the calculation is: 56.108 g/mol / 12.011 g/mol = 4.67.

4.67, is the ratio of the molecular mass to the empirical formula mass.

This means that the molecular formula of the chemical substance is C4H8, which has a molecular mass of 4 x 12.011 g/mol = 48.044 g/mol, and is the closest molecular mass to the given molar mass of 56.108 g/mol.

Therefore, the molecular formula of the chemical substance is C4H8.

to know more about molecular formula refer here:

https://brainly.com/question/14425592#

#SPJ11

The final pressure of carbon dioxide in the soda bottle, assuming it had the full 2.00 L in which to expand, is 1.20 atm.

The equation for the decomposition of carbonic acid is: H2CO3 → H2O + CO2.

When 75.0 g of carbonic acid is sealed in a 2.00 L soda bottle at room temperature (298.15 K), the decomposition reaction will occur and the carbon dioxide (CO2) will expand to fill the available space in the bottle.

The final pressure of carbon dioxide (in atm), the ideal gas law equation:

PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature.

Since we know the initial amount of carbonic acid (75.0 g), the number of moles present: n = (75.0 g H2CO3) / (84.01 g/mol), giving us a value of 0.894 moles.

The volume of the bottle (2.00 L) and the temperature (298.15 K). Thus, we can plug these values into the ideal gas law equation to calculate the final pressure of carbon dioxide:

P = (0.894 mol CO2) (0.08206 L*atm/K*mol) (298.15 K) / (2.00 L), which gives us a pressure of 1.20 atm.

Therefore, the final pressure of carbon dioxide in the soda bottle, assuming it had the full 2.00 L in which to expand, is 1.20 atm.

to know more about carbon dioxide refer here:

https://brainly.com/question/13528931#

#SPJ11

Answer : The molar mass of magnesium is 24.305 g/mol

To calculate the mass of magnesium that participated in the chemical reaction, you need to know the number of moles of magnesium and the molar mass of magnesium. The molar mass of magnesium is 24.305 g/mol. Multiply the number of moles of magnesium by the molar mass of magnesium to calculate the mass of magnesium that participated in the chemical reaction.  

For example, if you were given that the number of moles of magnesium is 0.25 moles, then you can calculate the mass of magnesium by multiplying 0.25 moles by 24.305 g/mol. This gives a result of 6.076 g of magnesium that participated in the chemical reaction.

To sum up, calculating the mass of magnesium that participated in the chemical reaction requires knowing the number of moles of magnesium and the molar mass of magnesium. The molar mass of magnesium is 24.305 g/mol, and you can calculate the mass of magnesium that participated in the chemical reaction by multiplying the number of moles of magnesium by the molar mass of magnesium.

Know more about magnesium here:

https://brainly.com/question/1533548

#SPJ11

Answer:

in the first box the answer will be=37.2

and in the second box= 22.4

The hydrogen necessary for this process is ultimately derived from the splitting of carbon dioxide molecules. Yes, the hydrogen necessary for the electron transport chain is derived from the splitting of carbon dioxide molecules in a process known as the Calvin Cycle, or the light-dependent reaction.

In this process, carbon dioxide, water, and light energy are used to create high-energy molecules, such as ATP and NADPH, which are then used in the electron transport chain. During the Calvin cycle, carbon dioxide is reduced by NADPH and ATP to produce a three-carbon molecule called glycerate 3-phosphate.

Hydrogen is removed from glycerate 3-phosphate to create a two-carbon compound known as glyceraldehyde 3-phosphate. This compound is then used to create other compounds, such as glucose, which can be used for energy.

Know more about  electron transport chain  here:

https://brainly.com/question/24372542

#SPJ11

Hydrofluoric acid is not a strong acid.

Hydrofluoric acid (HF) is a weak acid because it does not completely dissociate in water to form [tex]H^+[/tex] ions. In water, HF undergoes a partial dissociation to form [tex]H^+[/tex] and [tex]F^-[/tex] ions according to the following equilibrium:

[tex]HF + H_2O[/tex]  ⇌  [tex]H_3O^+ + F^-[/tex]

This equilibrium favors the reactant side, meaning that most of the HF molecules remain as HF in solution, with only a small percentage dissociating to form  [tex]H^+[/tex] ions.

In contrast, hydrochloric acid (HCl), hydrobromic acid (HBr), and hydroiodic acid (HI) are strong acids because they completely dissociate in water to form  [tex]H^+[/tex]  ions. These strong acids have weak conjugate bases, which makes the acid dissociation reaction highly favorable.

The strength of an acid is related to its tendency to donate a proton ( [tex]H^+[/tex] ) in water. The stronger the acid, the more readily it donates  [tex]H^+[/tex]  ions.

Therefore, hydrochloric acid, hydrobromic acid, and hydroiodic acid are stronger acids than hydrofluoric acid.

To learn more about acids refer:  https://brainly.com/question/14174495

#SPJ11

We will need 1.0 mol NaOH to react with 0.5 mol pf H2CO3.

Let's understand this in detail:

The balanced chemical equation of the neutralization reaction between H2CO3 and NaOH is

H2CO3 + 2NaOH ⟶ Na2CO3 + 2H2O.

We need to use the mole ratio from the balanced equation to determine how many moles of NaOH will react with 0.50 mol of H2CO3. We can see from the equation that 1 mole of H2CO3 reacts with 2 moles of NaOH.

Therefore, 0.50 mol of H2CO3 will react with

(2/1) x 0.50 = 1.0 mol of NaOH.

Answer: c. 1.0 mol NaOH.

#SPJ11

Learn more about neutralization reaction: Define Neutralisation reaction along with examples.​ https://brainly.com/question/23008798

For a case with 200% theoretical air, 33.3 kmol of air would be required per kmol of fuel. It is given that the stoichiometric combustion of ethane isC2H6 + 3.5(O2 + 3.76N2) → 2CO2 + 3H2O + 13.16N2As per the equation, it takes 3.5 kmol of (O2 + 3.76N2) to burn 1 kmol of ethane, and for 200% theoretical air, 7 kmol of (O2 + 3.76N2) would be used. Hence, option (d) is correct.

Therefore, 2 kmol of ethane would require 7 kmol of (O2 + 3.76N2). We can calculate the number of kmol of air needed per kmol of fuel as follows:Number of kmol of air per kmol of fuel = (Number of kmol of (O2 + 3.76N2) per kmol

of fuel) / 0.21Number of kmol of air per kmol of fuel = (7/2) / 0.21Number of kmol of air per kmol of fuel = 16.67 / 0.21 = 79.29 ≈ 33.3 kmol of airHence, option (d) is correct.

For more similar questions on topic stoichiometric combustion

brainly.com/question/14077954

#SPJ11