gunther is trying to push a 10 kg box. the coefficient of static friction between a 10 kg object and the floor is 0.50. what is the maximum force that can be applied on the object before it starts moving?

2000 ohms is the the resistance of fat if a 1 ma m a current is measured when potential difference of 0.5 v v is applied to the patient's arm.

we have r = resistance of the muscle

R = fat resistance

we are given R = 3r

such that the R total would be solved using ohms law:

We would have 3r² / 4r

= 0.75r

when we use the Ohm's law we would have the follwoing calculation

0.5 = 0.001 * 0.75 r

we are to solve for the value of r

0.5 = 0.00075r

divide through by:

r = 0.5 / 0.00075

= 666.667

Remember that R = 3r

R = 3 * 666.667

R = 2000 ohms

Read more on resistance here:https://brainly.com/question/17563681

#SPJ1

You can get yourself moving to the right on a slick surface with no traction by throwing the oranges to the left.

One possible way to get moving to the right on a slick surface with no traction is to throw the oranges to the left in a series of quick and forceful motions.

According to Newton's third law of motion, every action has an equal and opposite reaction. As you throw the oranges to the left, your body will experience a reactive force to the right, which can cause you to move in that direction.

By repeating this throwing motion with the oranges, you can continue to generate a reactive force that propels you in the desired direction.

More on Newton's third law can be found here: https://brainly.com/question/29768600

#SPJ1

The given statement is false. An isotonic contraction is a type of muscular contraction in which the muscle shortens while maintaining the same level of tension. This means that while the length of the muscle changes, the tension remains constant.

What are isotonic contractions?When a muscle contracts and causes a change in the length of the muscle and the muscle's tension remains constant, this is known as an isotonic contraction. The tension exerted by the muscle remains constant in isotonic contractions, but the length of the muscle changes. Isotonic contractions can be split into two types: eccentric and concentric contractions. The amount of force exerted by a muscle is determined by its ability to contract concentrically, while the ability to withstand loads while elongating is determined by its ability to contract eccentrically. Isometric contractions occur when the muscle's strength is not strong enough to overcome an opposing force. For example, pushing against a wall or attempting to lift an object that is too heavy for you. In both cases, the muscles are producing tension, but there is no movement because the opposing force is too great for the muscles to overcome. Therefore, the given statement is false.

For more details about isotonic contraction, click on the below link:

https://brainly.com/question/25121637

#SPJ11

The charge stored on the capacitor is 702 × 10^-12 C.

A capacitor is a device that stores an electric charge. It consists of two conductors separated by an insulator, which is often called a dielectric.

Capacitance is a measure of a capacitor's ability to store an electric charge. It's measured in farads (F) or picofarads (pF).A capacitor stores electrical energy in the form of an electric field.

The charge that is stored on a capacitor depends on the capacitance of the capacitor, as well as the voltage applied across the capacitor. The formula for calculating the charge stored on a capacitor is Q = CV,

where Q is the charge stored on the capacitor, C is the capacitance of the capacitor, and V is the voltage applied across the capacitor.

The capacitance of the capacitor is given as 13 pF and the voltage applied across the capacitor is 54 V.

Q = CVQ = 13 × 10^-12 F × 54 VQ = 702 × 10^-12 CTherefore, the charge stored on the capacitor is 702 × 10^-12 C.

to know more about capacitor refer here:

https://brainly.com/question/17176550#

#SPJ11

the ranking of the resistors in terms of current, from highest to lowest, is A, B, C, D.

To rank the four resistors in order of the current through the resistor from highest to lowest, we need to consider Ohm's Law, which states that the current (I) is equal to the voltage (emf) divided by the resistance (R). Mathematically, this is represented as I = emf / R.

Assuming that all resistors are connected to the same source of emf, the resistor with the lowest resistance will have the highest current, and the resistor with the highest resistance will have the lowest current. Therefore, we can rank the resistors based on their resistance values:

1. A. the 6.00-Ω resistor
2. B. the 8.00-Ω resistor
3. C. the 20.0-Ω resistor
4. D. the 25.0-Ω resistor

So the ranking of the resistors in terms of current, from highest to lowest, is A, B, C, D.

To learn more about resistors https://brainly.com/question/24858512

#SPJ11

Magnitude of the force required to give the helicopter an acceleration of 0.10g upward is 0.981m N, where m is the mass of the helicopter in kilograms.

Physical quantity which causes or tends to cause a motion in any object at rest or changes or tends to change the direction of motion of a moving object or shape or size of object is called force.

Force required to give a helicopter of mass m an acceleration of 0.10g upward can be calculated using Newton's second law. Here, the acceleration is 0.10g, which can be expressed as:

a = 0.10g = 0.10 * 9.81 m/s² = 0.981 m/s²

F = ma

F = m * 0.981

Therefore, magnitude of the force required to give the helicopter an acceleration of 0.10g upward is 0.981m N, where m is the mass of the helicopter in kilograms.

To know more about force, refer

https://brainly.com/question/12970081

#SPJ1

The distance between the rocket and the observer is increasing at a rate of about 186.6 m/s.

We can use the Pythagorean theorem to relate the distance between the rocket and the observer to the height of the rocket above the ground. Let d be the distance between the observer and the launch pad, and let h be the height of the rocket above the ground. Then,

d^2 = h^2 + 3^2 (1)

We can take the derivative of both sides of equation (1) with respect to time to get,

2d (dd/dt) = 2h (dh/dt) (2)

where (dd/dt) is the rate of change of distance between the observer and the rocket, and (dh/dt) is the rate of change of height of the rocket.

At the moment when the rocket is 4 km above the ground, h = 4 km = 4000 m, and (dh/dt) = 300 m/s.

Substituting these values into equation (2) and solving for (dd/dt),

dd/dt = (h/d) x (dh/dt) = (4000 m / √(4000^2 + 3000^2) m) x (300 m/s)

≈ 186.6 m/s

To know more about speed, here

brainly.com/question/29281805

#SPJ4

The wavelengths for visible light rays correspond to about the size of a pen. Option a is correct.

Visible light consists of electromagnetic waves with wavelengths that range from approximately 400 to 700 nanometers (nm), or billionths of a meter. This corresponds to frequencies ranging from approximately 430 to 750 terahertz (THz). These wavelengths are much larger than the size of a virus or a large molecule, which typically range from a few nanometers to a few micrometers in size. In comparison, the size of a pen is typically several centimeters long, which is much larger than the wavelength of visible light. Hence, option a is correct choice.

To know more about wavelengths, here

brainly.com/question/2505945

#SPJ4

Answer: C.

about the size of an amoeba

Explanation: ed mentum or plato

The correct option is A, the si unit of energy and how is it related to units of mass, distance, and time is joule.

The joule is a unit of measurement used to express energy or work done. It is named after the English physicist James Prescott Joule, who studied the relationship between heat and mechanical work in the mid-19th century. One joule is equal to the amount of energy needed to perform work of one newton-meter.

This means that if a force of one newton is applied over a distance of one meter, one joule of work is done. The joule is used to measure a wide variety of energies, including potential energy, kinetic energy, and thermal energy. It is also used to express the amount of work done by machines, such as engines and generators.

To learn more about Joule visit here:

brainly.com/question/18596314

#SPJ4

Complete Question: -

What is the SI unit of energy and how is it related to units of mass, distance, and time?

a. joule

b. watt

c. kilo

d. Newton

When two waves, in phase and with the same wavelength, interact, the result is a wave with an amplitude that is the sum of the amplitudes of the initial two waves.

Thus, the correct answer is a wave with an amplitude that is the sum of the amplitudes of the initial two waves (D).

А wаve is а disturbаnce thаt trаvels through а medium, trаnsferring energy from one point to аnother without trаnsferring the mаteriаl medium itself. Wаves cаn be of vаrious types, such аs sound wаves, electromаgnetic wаves, аnd more.

When two wаves interаct, there аre three possible results: reinforcement, interference, аnd а combinаtion of the two. When two wаves interfere with one аnother, their displаcements аdd up to form а resultаnt wаve. The crest of one wаve is in line with the crest of the other wаve, resulting in constructive interference, which results in а wаve with аn аmplitude thаt is the sum of the аmplitudes of the initiаl two wаves.

For more information about wаve refers to the link: https://brainly.com/question/25954805

#SPJ11

The second law of thermodynamics states that energy spontaneously flows from high-temperature objects to low-temperature objects until the temperatures are balanced or equal.

The energy quality is reduced when energy changes from one form to another, making it difficult to transform from one form of energy to another, reducing the efficiency of energy conversion.

The second law of thermodynamics is critical to the understanding of energy conversions because it provides a quantitative measure of energy quality, which relates to the ease with which it can be used to perform work.

According to the second law of thermodynamics, the quality of energy tends to degrade over time, resulting in a reduction in efficiency when converting one form of energy to another.

Read more about the topic of laws of thermodynamics:

https://brainly.com/question/13164851

#SPJ11

Digital sampling machines are not an example of mechanical action.

Mechanical action refers to the physical movement of mechanical components to produce a sound or perform a specific function. This can include a wide range of actions, such as the striking of hammers on strings in a piano, the rotation of tonewheels in a Hammond organ, or the movement of valves in a trumpet.

Mechanical action can also be found in other types of machinery and equipment, and tools such as engines, gears, and levers, where physical movement is used to perform a specific task or function.

Learn about mechanical energy here https://brainly.com/question/30692822

#SPJ1

The solar system's many small bodies, such as asteroids, comets, and small moons, are unlikely as potential homes to life due to the fact that these celestial objects have too little gravity to support an atmosphere and most have no liquid water.

This is because their small sizes and masses do not allow for enough gravitational force to retain an atmosphere, and the extreme temperatures make liquid water impossible. Additionally, many small bodies lack the necessary components needed to support life, such as organic compounds or the right amount of radiation.

Asteroids, comets, and small moons typically have a low density, which means they are composed of rocks, dust, or ice, which would not support life. Moreover, these celestial objects have highly variable rotational periods and orbits, which would result in chaotic and extremely variable temperatures, making it difficult for any life forms to survive.

These celestial objects are also very small in comparison to other bodies in the solar system, meaning they receive far less sunlight than larger bodies. This is important for life to thrive because it requires energy from the sun to grow, reproduce, and obtain nutrients. The lack of energy from the sun, combined with the lack of liquid water and a protective atmosphere, makes these small bodies unlikely candidates for supporting life.

Therefore, it is unlikely to consider the celestial objects as potential homes because of the lack of sustainable living conditions like gravity, water, oxygen, and other organic substances.

To know more about asteroids, refer here:

https://brainly.com/question/19161842#

#SPJ11

The focal length of the mirror is  8.57 cm.

The focal length is the distance between the mirror and the focal point.

For a convex lens the focal point is that point at which parallel rays will be focused after passing thru the lens.

For a convex lens, which is thicker at the center and thinner at the edges, the focal point is the point where parallel rays of light that pass through the lens converge.

When parallel rays of light pass through a convex lens, they are refracted, or bent, towards the center of the lens due to the lens's shape and refractive index.

As a result, these rays of light converge at a point on the opposite side of the lens from where the light entered, and this point is known as the focal point of the lens.

The distance between the convex lens and its focal point is called the focal length. It is usually denoted by the symbol 'f' and is an important parameter in lens design and optical systems.

The focal length of a convex lens determines how much the lens will bend or refract light and how much the light will converge at the focal point.

A lens with a shorter focal length will bend light more and converge it at a closer focal point, while a lens with a longer focal length will bend light less and converge it at a farther focal point.

The focal length of the concave spherical mirror can be calculated using the formula: 1/f = (1/p) + (1/q),

where p is the distance from the object to the mirror (13.2 cm) and q is the distance from the image to the mirror (14.0 cm).

Therefore, the focal length of the mirror is 8.57 cm.

To know more about focal length, refer here:

https://brainly.com/question/29870264

#SPJ11

The maximum magnetic energy stored in the space above a city, with an area of 3.40 108 m2 and a height of 1300 m, can be calculated using the equation E = B²V/2, where B is the strength of the Earth's magnetic field (7.0 10-5 t), V is the volume of the space (4.42 10¹⁰ m³), and E is the energy stored. Plugging in the values for B and V, we find the maximum magnetic energy stored in the space above the city to be 6.17 10¹⁵ J.

The Earth's magnetic field is important for providing a protective barrier against dangerous cosmic rays, and for allowing creatures that use magnetoception, such as birds, to navigate.

The Earth's magnetic field is always changing and is generated by electrical currents in the core of the Earth, which are influenced by convection currents and the rotation of the Earth. Even though the energy stored in the Earth's magnetic field is quite small, it still plays an important role in the way the Earth works.

Know more about magnetoception here

https://brainly.com/question/24308326#

#SPJ11

The average mass of the skiers is 66.0 kg. The power output of the motor is 4.70 kw. The maximum speed at which the skiers can be towed is 4.21 m/s.

Since there are 10 skiers, the total mass is:

M = 10m = 10(66.0 kg) = 660.0 kg

The force exerted by the tow rope is:

F = Mg sin([tex]\theta[/tex])

F = (660.0 kg)(9.81 m/s^2) sin(8.5 degrees)

F = 1117.9 N

Now, we can use the equation P = Fv to solve for the maximum speed at which the skiers can be towed:

v = P/F

v = (4.70 kW)/(1117.9 N)

v = 4.21 m/s

Speed is a fundamental concept in physics and is used to describe the motion of objects. It is a relative quantity and depends on the observer's frame of reference. For example, the speed of a car traveling at 60 miles per hour relative to the ground is different from the speed of the same car traveling at 0 miles per hour relative to the driver.

Speed is also related to other physical quantities such as velocity, acceleration, and momentum. Velocity is the speed of an object in a particular direction, while acceleration is the rate of change of velocity over time. Momentum is the product of an object's mass and velocity, and it determines how difficult it is to stop the object's motion.

To learn more about Speed visit here:

brainly.com/question/28224010

#SPJ4

The stone thrown upward from ground level with an initial speed of 176 feet per second will reach a maximum height of: approximately 564 feet

To calculate the maximum height, we must use the equation of motion, which states that the final velocity is equal to the initial velocity plus the acceleration times the time. We know the initial velocity (176 feet per second) and the acceleration is equal to the acceleration due to gravity, which is -32 feet per second squared.

Since we do not know the time, we can solve it using the equation Vf = Vi + at. Solving for t, we get[tex]t = (Vf-Vi)/a[/tex], where Vf is 0 and Vi is 176 feet per second. Thus,[tex]t = (0-176)/(-32)[/tex], and t = 5.5 seconds.

Using the equation of motion, we can find the maximum height by using the equation [tex]H = Vi*t + (1/2)*a*t^2[/tex]. We plug in our values and get[tex]H = 176*5.5 + (1/2)*(-32)*5.5^2 = 564 feet.[/tex]

Therefore, the stone thrown upward from ground level with an initial speed of 176 feet per second will reach a maximum height of approximately 564 feet.

To know more about speed refer here:

https://brainly.com/question/28224010#

#SPJ11

To complete the given sentences explaining why the transverse pulse traveling on a rope held by two people reflects in the opposite orientation each time it reaches a person order of the words used is third law, the same, oppose, increase.

When a transverse wave pulse reaches a fixed end of the rope, the displacement of the rope end exerts a force on the object that is keeping the end fixed (in this case, a person). By Newton's third law, the person must exert a force of the same magnitude in oppose direction; otherwise, the end of the rope would not remain stationary but would accelerate in the direction of the force due to the wave disturbance. Because this force acts to increase the force of the incoming wave pulse, it initiates an outgoing wave pulse that is inverted with respect to the incoming wave pulse.

When a transverse pulse traveling on a rope held by two people reaches one of the people, the pulse is reflected in the opposite orientation. This happens because of the interaction between the pulse and the person holding the rope.

By Newton's third law, the displacement of the rope end exerts a force on the person that is equal in magnitude but opposite in direction. If the person did not exert an equal and opposite force, the end of the rope would not remain stationary but would instead accelerate in the direction of the force due to the wave disturbance.

The force exerted by the person opposes the force of the incoming wave pulse, initiating an outgoing wave pulse that is inverted with respect to the incoming wave pulse. This happens due to the conservation of energy and momentum, which are described by Newton's first and second laws. The outgoing pulse has a smaller amplitude than the incoming pulse because some energy is lost in the reflection process.

Learn more about transverse wave pulse:

https://brainly.com/question/15531840

#SPJ11

Answer:

Whether the object or fluid is moving, drag occurs as long as there is a difference in their velocities. Because it is resistant to motion, drag tends to slow down the object. An effective way to reduce it is to alter the shape of the object and make it streamline. Drag Force Examples of Drag Force

Explanation:

Just the pull from the rope's tension acts horizontally on mass 1, functioning as the only force. In this case, T=m1*F/(m1+m2) represents the tension (again, the acceleration is the same because of the rope and the lack of friction, I think).

The blocks with masses of 1 kg and 2 kg lie on a rough horizontal surface and are joined by a spring. It is not strained to any degree. K=2 N/m represents the spring constant. Blocks and a horizontal surface interact with each other with a 0.5 coefficient of friction.

The masses shift in such a way that the string's length between P1 and P2 is parallel to the inclined plane.

learn more about frictionless pulleys

https://brainly.com/question/28123769

#SPJ1

A tiny neutrally buoyant electronic stress probe is launched into the inlet pipe of a water pump and transmits 2000 strain readings per second as it passes through the pump. This is a lagrangian measurement.

Lagrangian measurement is a technique used in fluid dynamics to track the motion of particles or objects within a fluid. The Lagrangian approach follows the motion of individual fluid particles, while the Eulerian approach observes the flow of fluid at fixed points in space. In Lagrangian measurement, the position, velocity, and acceleration of each particle is tracked over time.

Lagrangian measurements can provide information on the mixing and dispersion of pollutants in the environment, the transport of sediment in rivers, and the movement of microorganisms in oceans. Lagrangian measurements can be conducted using a variety of techniques, such as tracer particles, acoustic or optical sensors, and satellite imagery. These measurements have applications in a range of fields, including meteorology, oceanography, and environmental science.

To learn more about Lagrangian visit here:

brainly.com/question/28357993

#SPJ4

Once body density is determined as with hydrostatic weighing and air displacement plethysmography, percent body fat can be calculated using the Siri equation. Body density refers to the measurement of an individual's body mass. It is the mass of an individual's body divided by the volume of their body.

It is expressed in kilograms per cubic meter in SI units. Body density can be used to calculate body fat percentage. Body fat percentage, also known as adiposity index, is the amount of body fat present in an individual's body divided by their total body mass. Body fat is essential for proper functioning of the body, but it needs to be maintained in the right amount for overall health and well-being.

Percent body fat calculation using the Siri equation Once the body density is determined, percent body fat can be calculated using the Siri equation. The Siri equation is expressed as: Percent body fat = [(4.95/Body Density) - 4.50] x 100The Siri equation is an accurate way of calculating percent body fat. It uses body density as its basis for measurement.

Body density is determined by measuring the mass and volume of the individual's body. Hydrostatic weighing and air displacement plethysmography are the two most common methods for determining body density. These methods are accurate and reliable for body density measurement.

To know more about Body density  refer here:

https://brainly.com/question/4211696#

#SPJ11

Observing the reaction of the book when placed on the table, we can determine the relative magnitudes of the forces on the upper book. If the book stays in place, then the magnitude of the normal force is equal to the gravitational force. If the book slides down, then the gravitational force is greater than the normal force, and if the book slides up, then the normal force is greater than the gravitational force.

To determine the relative magnitudes of the forces on the upper book, we can observe the reaction of the book when placed on the table. If the book stays in place and does not move, then the forces on the upper book are in balance, meaning that the magnitude of the normal force is equal to the gravitational force.

To explain further, the normal force is the force that the table exerts on the book. It opposes the force of gravity, which is the force of attraction between the book and the Earth. When the normal force is equal to the gravitational force, the book is in equilibrium, meaning that it stays in place. When the gravitational force is greater than the normal force, the book slides down, and when the normal force is greater than the gravitational force, the book slides up.

for such more question on magnitudes

https://brainly.com/question/24468862

#SPJ11

The magnitude of the force that the child exerts on the seat at the lowest point if his mass is 18.5 kg is 981 N.

To determine the magnitude of the force on the child, we must find the magnitude of the centripetal acceleration of the child at the low point first. We can use the equation:

[tex]a_{c}[/tex] = [tex]\frac{v^{2} }{r}[/tex]

where v = 9 m/s and r = 2 m

thus,

[tex]a_{c}[/tex] = [tex]\frac{9^{2} }{2}[/tex]

[tex]a_{c}[/tex] = 40.5 m/s²

And then, we find out the magnitude of the force that the child exerts on the seat at the lowest point if his mass is 18.5 kg.

∑[tex]f_{y}[/tex] = m × [tex]a_{c}[/tex]

[tex]f_{n}[/tex] - w = m × [tex]a_{c}[/tex]

[tex]f_{n}[/tex] = m × [tex]a_{c}[/tex] + w

[tex]f_{n}[/tex] = (18.5 × 40.5) + 18.5 (9.80)

[tex]f_{n}[/tex] = 981 N

Thus, the magnitude of the force that the child exerts on the seat at the lowest point if his mass is 18.5 kg in N is 981 N.

Your question is incomplete, but most probably your full question was

A mother pushes her child on a swing so that his speed is 9.00 m/s at the lowest point of his path. The swing is suspended 2.00 m above the child’s center of mass.

For more information about magnitude of the force refers to the link: https://brainly.com/question/30033702

#SPJ11

The amount of work done by a person lifting a 6.7-kg object from the bottom of a well at a constant speed of 2.5 m/s for 9 s is 1517.25 Joules.

The work done is determined using the equation below;

W = FdW = mgd

Where,W = Work done by the person,m = mass of object = 6.7 kg,g = acceleration due to gravity = 9.8 md = distance lifted by the person = ?We know that F = m(g + a) where a is the acceleration of the object that was lifted. The object is lifted at a constant velocity and so the acceleration of the object is zero. Hence,

F = mgF = 6.7 × 9.8F = 65.66 N

We can now determine the distance d that was lifted using the equation below;

d = vt

Where,v = constant velocity = 2.5 m/s.t = time taken = 9 s

Substituting the values; d = 2.5 × 9d = 22.5 m

Now we can determine the work done;

W = FdW = 65.66 × 22.5W = 1472.85 Joules (3 decimal places)

The work done by the person lifting a 6.7-kg object from the bottom of a well at a constant speed of 2.5 m/s for 9 s is 1517.25 Joules (2 decimal places)Answer: 1517.25 Joules.

More on work: https://brainly.com/question/29568084

#SPJ11

The initial speed given to the rock was approximately 100.96 m/s.

The time it takes for the rock to fall from the cliff to the water can be found using the kinematic equation,

h = 1/2gt^2

where h is the height of the cliff (34 m), g is the acceleration due to gravity (-9.81 m/s^2), and t is the time it takes for the rock to fall. Solving for t,

t = sqrt(2h/g) = sqrt(2 * 34 / 9.81) = 2.15 s

The horizontal velocity of the rock can be found using the equation,

v = d/t

where d is the horizontal distance the rock travels (unknown) and t is the time it takes for the rock to hit the water (2.78 s). We can use the speed of sound in air (343 m/s) to find the distance d, since the time it takes for the sound of the splash to reach the player is equal to the time it takes for the rock to travel that distance plus the time it takes for the sound to travel that same distance,

2.78 s = t + d/343

Solving for d,

d = (2.78 - t) * 343 = (2.78 - 2.15) * 343 = 217.11 m

Now that we know the horizontal distance the rock travels, we can find its initial velocity using the equation,

v = d/t = 217.11/2.15 = 100.96 m/s

To know more about speed, here

brainly.com/question/30622344

#SPJ4

The initial velocity of a 500g ball kicked at a 45-degree angle to the horizontal and reaching a height of 12m can be calculated using the kinematic equation.

The equation of kinematics is a set of equations that are used to describe the motion of objects. They relate to displacement, velocity, acceleration, and time. Kinematic equations are divided into two categories, depending on the object's acceleration: zero acceleration and non-zero acceleration.

The kinematic equation for the object in motion with uniform acceleration is as follows:v^2 = u^2 + 2asWhere: v = final velocity u = initial velocity a = acceleration s = displacement. To calculate the initial velocity of the ball, we can rearrange the equation above to obtain:u^2 = v^2 - 2as From the given, a = -9.8 m/s² (negative acceleration indicates that the ball is decelerating or moving upward) s = 12m v = 0 (the final velocity is zero because the ball has stopped rising and is about to start falling). We'll use these values to calculate the initial velocity of the ball.u² = (0)² - 2(-9.8)(12)u² = 235.2u = sqrt(235.2)u = 15.33 m/s.

Therefore, the initial velocity of the ball is approximately 15.33 m/s.

Read more about velocity :

https://brainly.com/question/80295

#SPJ11

The horizon is approximately 3,474 miles away when viewed from 1.5 miles above the surface of the Earth.

Calculation: The radius of the Earth is 4,000 miles, so the circumference of the Earth is 8,000 miles (2pir). The distance to the horizon is the circumference divided by 2pi, or 8,000 miles / 2pi = 3,474 miles.

The horizon is approximately 1.32 × √ (h) miles away, where h is the height of the observer above the surface of the Earth. Given the Earth's diameter, an observer in a hot air balloon at 1.5 miles above the surface of the Earth would be approximately 1.32 × √ (1.5) miles from the horizon.

The calculation is done as follows.1.32 × √ (1.5) miles= 1.32 × √ (1.5) miles = 1.32 × 1.22 miles= 1.61 miles So, an observer in a hot air balloon 1.5 miles above the surface of the Earth would be approximately 1.61 miles away from the horizon.

You can read more about radius of the Earth at https://brainly.com/question/22719331

#SPJ11

Answer:

Part A:

The speed of a wave on the string can be calculated using the formula:

v = fλ

where f is the frequency and λ is the wavelength. In this case, we only know the frequency of the fundamental mode, so we need to use another formula that relates the wavelength and the length of the string:

λn = 2L/n

where n is the mode number (n = 1 for the fundamental mode), and λn is the wavelength of the nth mode. Substituting this expression for λ into the first formula, we get:

v = fn × 2L/n

Substituting the given values, we get:

v = (294 Hz) × 2(0.69 m)/(1)

v = 406 m/s

Therefore, the speed of a wave or pulse on the string is 406 m/s.

Part B:

The frequencies of the other modes of vibration can be calculated using the formula:

fn = nv/2L

where n is the mode number, v is the speed of the wave on the string (which we found in Part A), and L is the length of the string. Substituting the given values, we get:

f2 = (2 × 406 m/s)/(2 × 0.69 m) = 589 Hz

f3 = (3 × 406 m/s)/(2 × 0.69 m) = 883 Hz

f4 = (4 × 406 m/s)/(2 × 0.69 m) = 1178 Hz

Therefore, the first three other frequencies at which the string can vibrate are 589 Hz, 883 Hz, and 1178 Hz.