Heat energy refers to the kinetic energy of molecules. Heat can move in a number of different ways: when warm air rises causing the gas or liquid to circulate, the process that is said to occur is ________.
A) latent heat transfer
B) conduction
C) convection
D) radiation
E) evaporation

Answers

Answer 1

C) convection. Convection occurs when warm air rises, causing the gas or liquid to circulate, thus transferring heat energy.

The process of convection as a way in which heat energy can be transferred.

Heat energy refers to the kinetic energy of molecules, and when warm air rises causing the gas or liquid to circulate, the process occurring is convection.

Convection is the movement of heat within fluids (liquids and gases) due to the differences in their densities.

Hence, the process that occurs when warm air rises and causes the circulation of gas or liquid is known as convection.

learn more about Convection click here:

https://brainly.com/question/9382711

#SPJ11


Related Questions

What is the formula of snell descartes on the refraction?​

Answers

The relationship between the angles of incidence and refraction when a light ray passes across the boundary between two media with differing refractive indices is described by Snell-Descartes law.

Snell's law

n₁sinθ₁ = n₂sinθ₂

In the following equation, n1 and n2 stand for the refractive indices of the two media. θ₁ for angle of incidence (the angle between the incident ray and the normal to the boundary), and θ₂ for angle of refraction (the angle between the refracted ray and the normal to the boundary). Sometimes referred to as Snell-Descartes law, in its mathematical form.

Learn more about Snell-Descartes law, here:

https://brainly.com/question/2273464

#SPJ1

0.010 Volt =
A) 1000 millivolts
B) 100 millivolts
C) 10 millivolts
D) 1 micrvolt

Answers

To convert 0.010 Volt to millivolts, you need to multiply by 1,000 (since 1 Volt = 1,000 millivolts). 0.010 Volt × 1,000 = 10 millivolts.So, the correct answer is: C) 10 millivolts

The prefix "milli-" means one thousandth, so 1 millivolt (mV) is equal to 0.001 volts. Therefore, to convert from volts to millivolts, we need to multiply by 1000.

0.010 volts x 1000 = 10 millivolts

So, 0.010 volts is equivalent to 10 millivolts.

Alternatively, we can also use the following conversion factor:

1 mV = 0.001 V

To convert from volts to millivolts, we can multiply by 1000:

0.010 V x 1000 = 10 mV

Either way, we get the same answer of 10 millivolts.

Learn more about Volt here:

https://brainly.com/question/28675147

#SPJ11

A voltage of 0.02 Volts across a 50mV and 10 Ampere shunt indicates a current of:
A)0.004A
B) 0.1A
C) 4.0A
D) 50A

Answers

The answer will be A simple

Answer:

a

Explanation:

What kind of spectrum (light over a range of frequencies) do active galaxies emit?

Answers

Active galaxies emit a broad spectrum of electromagnetic radiation, ranging from radio waves to gamma rays, with strong emissions in the X-ray and ultraviolet regions.

Active galaxies emit a wide range of electromagnetic radiation, or light, across the spectrum, from radio waves with the lowest frequency, to gamma rays with the highest frequency. This emission is a result of the activity of the supermassive black hole at the center of the galaxy, which powers the emission of radiation by accreting matter. The radiation emitted by active galaxies is often characterized by strong emissions in the X-ray and ultraviolet regions, as well as in visible, infrared, and radio wavelengths. The detailed characteristics of the emission spectrum depend on the type of active galaxy and its orientation relative to Earth.

Learn more about Active galaxies emit here.

https://brainly.com/question/1507340

#SPJ11

Help please!! I think the answer is B.

Answers

The net change in the kinetic energy of the cart from x = 0 m to x = 4 m is +10 N.

The correct option is B.

What is the net change in the kinetic energy of the body?

The net change in the kinetic energy of the body is calculated as follows:

The net change in the kinetic energy of the body = change in kinetic energy from x between 0 to 2  change in kinetic energy from x between 2 to 4

The change in kinetic energy from x between 0 to 2 = Force * distance

The change in kinetic energy from x between 0 to 2 = 10 * 2

The change in kinetic energy from x between 0 to 2 = 20 N

The change in kinetic energy from x between 2 to 4 =  Force * distance

The change in kinetic energy from x between 2 to 4 = - 5 * (4 - 2)

The change in kinetic energy from x between 2 to 4 = -10 N

The net change in the kinetic energy of the body = (20 - 10) N

The net change in the kinetic energy of the body = 10 N

Learn more about kinetic energy at: https://brainly.com/question/8101588

#SPJ1

In 1928 Kiyotsugu Hirayama grouped some asteroids into families. What is similar for the asteroids of a Hirayama family?

Answers

Asteroids in a Hirayama family share similar orbital elements, specifically semi-major axis, eccentricity, and inclination, indicating that they may have originated from the same parent body.

In 1928, Kiyotsugu Hirayama grouped asteroids with similar orbital elements into families. The orbital elements that he used were the semi-major axis, eccentricity, and inclination of the asteroids' orbits. Hirayama noticed that asteroids with similar orbital elements tended to cluster together and speculated that they may have originated from a common parent body that was disrupted by a collision or other mechanism. Today, the Hirayama families are recognized as important groups of asteroids that can provide insight into the formation and evolution of the asteroid belt.

Learn more about Hirayama family here.

https://brainly.com/question/29716154

#SPJ11

What must the minimum speed be for a 25 kg block to slide 22 meters up a

frictionless plane that makes an angle of 30deg with the horizontal

Answers

By equating the energy of these two objects, we may determine the minimum speed required, which turns out to be 15.24 m/s.

We must determine the least speed needed to carry a 25 kilogramme block up a frictionless plane that forms a 30 degree angle with the horizontal. To resolve this issue, we can apply the idea of energy conservation. The block's initial kinetic energy and the potential energy it gains as it ascends the plane are equal.

Using the block's mass, gravity's acceleration, and the block's vertical distance travelled, we can determine the potential energy obtained by the block. The mass of the block and its velocity can be used to calculate its initial kinetic energy.

we can write the conservation of energy equation as:

mg0.5v² = mg22sin(30) where v is the velocity of the block at the bottom of the plane.

Simplifying this equation, we get:

v = √(449.81sin(30)) = 13.2 m/s

Therefore, the minimum speed required for the block to slide 22 meters up a frictionless plane that makes an angle of 30 degrees with the horizontal is 13.2 m/s.

By equating the energy of these two objects, we may determine the minimum speed required, which turns out to be 15.24 m/s.

Learn more about energy:

brainly.com/question/30672691

#SPJ4

determine the direction of the force that will act on the charge in each of the following situations. you are currently in a labeling module. turn off browse mode or quick nav, tab to items, space or enter to pick up, tab to move, space or enter to drop. a positive charge moving into the screen in a magnetic field that points to the right. a positive charge moving to the left in an electric field that points into the screen. a negative charge moving upward in a magnetic field that points downward. answer bank

Answers

The direction of the force that will act on the charge in each of the following situations is as follows:

1. A positive charge moves into the screen in a magnetic field that points to the right: The force will act in a downward direction.

2. A positive charge moving to the left in an electric field that points into the screen: The force will act in the right direction.

3. A negative charge moving upward in a magnetic field that points downward: The force will act in the opposite direction of the charge's velocity, i.e., it will act in the downward direction.

1. According to the right-hand rule for magnetic force, when a positive charge moves into the screen in a magnetic field that points to the right, the force will act in the downward direction, perpendicular to both the velocity of the charge and the direction of the magnetic field.

2. According to the definition of the electric field, a positive charge will experience a force in the direction of the electric field. In this case, as the charge is moving to the left and the electric field points into the screen, the force will act in the right direction, perpendicular to both the velocity of the charge and the direction of the electric field.

3. For a negative charge moving upward in a magnetic field that points downward, the force acting on the charge will be in the opposite direction of the velocity of the charge, according to the left-hand rule for magnetic force. Hence, the force will act in the downward direction, perpendicular to both the velocity of the charge and the direction of the magnetic field.

To know more about charge refer here:

https://brainly.com/question/3412043#

#SPJ11

Which of the following is closest in size (radius) to a neutron star? A) the Earth B) a city. C) a football stadium D) a basketball. E) the Sun.

Answers

The closest in size (radius) to a neutron star would be a city. The correct answer is option B.

Neutron stars are incredibly dense objects that are formed from the remnants of massive stars that have undergone a supernova explosion. They are typically only about 10-20 km in radius but can have masses that are 1.4 to 2 times that of the sun. This means that neutron stars are incredibly compact, with densities that are greater than those found in atomic nuclei.

To put this in perspective, the radius of the Earth (option A) is about 6,371 km, the radius of a football stadium (option C) is typically around 100 meters, the radius of a basketball (option D) is about 12 cm, and the radius of the Sun (option E) is about 696,340 km.

Therefore option B is correct.

learn more about 'stars':

https://brainly.com/question/31688881

#SPJ11

15. The formation of a standing wave requires _____.

A. two waves that have been traveling over a long distance
B. constructive interference between two waves with different frequencies
C. interference between the incoming and reflected waves of the same frequency

Answers

The formation of a standing wave requires interference between the incoming and reflected waves of the same frequency. The correct option is C.

A standing wave is a wave pattern that is formed when waves of equal amplitude and frequency travel in opposite directions and interfere with each other in a confined space. This results in a wave pattern that appears to be stationary, with certain points along the wave appearing to be fixed in place.

Option A is not true because a standing wave is formed by waves that are traveling in opposite directions, not the same direction. Two waves traveling over a long distance would have traveled in the same direction and thus would not form a standing wave.

Option B is not true because constructive interference occurs when waves of the same frequency and amplitude are traveling in the same direction and combine to form a wave with a larger amplitude. This does not result in a standing wave.

Option C is the correct answer because a standing wave is formed by the interference between incoming and reflected waves of the same frequency. When a wave is reflected from a fixed end, it undergoes a phase change of 180 degrees. If the reflected wave meets the incoming wave at the correct phase, they interfere constructively and a standing wave is formed.

Therefore, The correct answer is option C.

To learn more about Frequency click:

brainly.com/question/1292129

#SPJ1

The longitudinal displacement of a mass element in a medium as a sound wave passes through it is given by s = sm cos (kx -wt). Consider a sound wave of frequency 440 Hz and wavelength 0.75m. If sm = 12

Answers

The longitudinal displacement of a mass element in a medium as a sound wave passes through it is given by s = sm cos (kx - wt).


This formula gives the displacement of a mass element (s) in a medium due to a sound wave, where sm is the amplitude of the wave, k is the wave number, x is the distance along the direction of wave propagation, w is the angular frequency, and t is time.

For the given sound wave with a frequency of 440 Hz and wavelength of 0.75m, we can find the wave number (k) using the relation k = 2π/λ, where λ is the wavelength.

So, k = 2π/0.75 = 8.3776 m^-1.

Now, the formula becomes:

s = 12 cos (8.3776x - wt)

Note that the amplitude of the wave, sm, is given as 12.

We can also find the angular frequency (w) using the relation w = 2πf, where f is the frequency.

So, w = 2π(440) = 2π * 440 rad/s.

Putting all these values in the formula, we get:

s = 12 cos (8.3776x - 2π * 440 t)

This formula gives the longitudinal displacement of a mass element in the medium due to the given sound wave.

learn more about wavelength

https://brainly.com/question/10728818

#SPJ11

What can occur only in a binary system, and all such events are thought to have about the same luminosity?

Answers

In a binary system, two stars orbit around a common center of mass. One of the unique events that can occur in a binary system is a type of stellar explosion known as a supernova.

This occurs when one of the stars in the binary system runs out of fuel and collapses, causing a massive explosion that can outshine an entire galaxy. Another event that can occur in a binary system is a tidal disruption event, where one star is torn apart by the gravitational forces of its companion star. This can also result in a sudden increase in luminosity, although not as bright as a supernova. In addition, binary systems can also exhibit periodic variations in their luminosity due to eclipses, where one star passes in front of the other from our vantage point on Earth. This can be used by astronomers to study the properties of the stars in the binary system, such as their sizes and masses. Overall, while various events can occur in a binary system, supernovae are thought to have about the same luminosity due to the fact that they are caused by the same type of stellar explosion. This allows astronomers to use them as a standard candle for distance measurements in the universe.

Learn more about supernova here

https://brainly.com/question/1276261

#SPJ11

0. 100 kg stone rests on a frictionless, horizontal surface. A bullet of mass 6. 50 g , traveling horizontally at 390 m/s , strikes the stone and rebounds horizontally at right angles to its original direction with a speed of 200 m/s

1- Compute the magnitude of the velocity of the stone after it is struck

2- Compute the direction of the velocity of the stone after it is struck.

from the initial direction of the bullet

3-Is the collision perfectly elastic?

Answers

1. The magnitude of the velocity of the stone after it is struck is 0.8715 m/s.

Before the collision, the momentum of the bullet is given by:

p₁ = m₁v₁ = (0.0065 kg)(390 m/s) = 2.535 kg⋅m/s

p₂ = m₁v₂ = (0.0065 kg)(200 m/s) = 1.3 kg⋅m/s

p₁ + 0 = p₂ + p₃

where p₃ is the momentum of the stone after the collision.

Solving for p₃, we get:

p₃ = p₁ - p₂ = 2.535 kg⋅m/s - 1.3 kg⋅m/s = 1.235 kg⋅m/s

m₁v₁ + m₂v₂ = m₁v₃ + m₂v₄

where v₄ is the velocity of the stone after the collision. Substituting the values, we get:

(0.0065 kg)(390 m/s) = (0.0065 kg)(200 m/s) + (100 kg)v₄

Solving for v₄, we get:

v₄ = [0.0065 kg(390 m/s) - 0.0065 kg(200 m/s)] / 100 kg

v₄ = 0.8715 m/s

2. The direction of the velocity of the stone, after it is struck, can take any direction within a plane perpendicular to the original direction of the bullet.

3. No, the collision is not perfectly elastic because some of the kinetic energy of the system is lost during the collision.

A collision occurs when two or more objects interact with each other, exchanging energy and momentum. There are two types of collisions: elastic and inelastic. In an elastic collision, the objects involved collide and bounce off each other without any loss of kinetic energy. In this type of collision, the total kinetic energy of the system before and after the collision remains the same.

On the other hand, in an inelastic collision, the objects involved collide and stick together, resulting in a loss of kinetic energy. In this type of collision, the total kinetic energy of the system before the collision is greater than the total kinetic energy of the system after the collision. Collisions can be described using the laws of conservation of energy and momentum. These laws state that the total energy and momentum of a system are conserved, meaning they remain constant before and after a collision.

To learn more about Collision visit here:

brainly.com/question/13138178

#SPJ4

What spiral galaxy has a very bright nucleus?

Answers

A spiral galaxy with a very bright nucleus is commonly referred to as a Seyfert galaxy. Seyfert galaxies are a type of active galaxy that exhibit high luminosity and a bright, compact nucleus.

They are named after the American astronomer Carl Seyfert, who first identified them in the 1940s. The bright nucleus of Seyfert galaxies is believed to be powered by a supermassive black hole at the center of the galaxy. As matter falls into the black hole, it heats up and emits intense radiation, including visible light. This results in a very bright and compact core or nucleus in Seyfert galaxies, which can outshine  spiral galaxy  the surrounding spiral arms. Seyfert galaxies are classified as Type 1 or Type 2, based on the characteristics of their spectra. Type 1 Seyfert galaxies exhibit broad emission lines in their spectra, while Type 2 Seyfert galaxies show only narrow emission lines. Seyfert galaxies are relatively rare, accounting for only a small percentage of all known galaxies, and they are often studied to better understand the properties and behavior of active galaxies and their central black holes.

Learn more about  spiral galaxy    here:

https://brainly.com/question/13074009

#SPJ11

the following questions refer to explorer 35, a recon spacecraft launched from kennedy space center at the height of the space race in the late 1960's. the plot below shows the position of explorer 35 at fifteen minute intervals as it orbited the moon once. the lines on this plot indicate lunar radii (1738 km), so the moon would have a diameter of two squares.

Answers

Explorer 35, a recon spacecraft launched from Kennedy Space Center during the late 1960s space race, orbited the moon once, as shown in the plot below with lines indicating lunar radii (1738 km) for scale.

The plot shows the trajectory of Explorer 35, a spacecraft that orbited the moon once. The lines on the plot represent lunar radii, which are used as a scale to understand the position of the spacecraft relative to the moon's surface.

The moon has a diameter of approximately two lunar radii, or 2 * 1738 km = 3476 km. The plot likely shows the position of the spacecraft at 15-minute intervals as it completes its orbit around the moon. This information would be useful for studying the spacecraft's trajectory and position relative to the moon during its mission.

To know more about Kennedy Space Center refer here:

https://brainly.com/question/1124449#

#SPJ11

1. Calculate the amount of torque applied to the fastener for the torque wrench shown in the figure. Use
the formula T=FX D.
Torque

Answers

The amount of torque can be calculated by Force x Moment arm.

How to calculate torque

It should be noted that to uncover the quantity of torque, you must comprehend both the force applied and the separation from the pivot point (also referred to as the moment arm) at which the force is exerted. The formula for torque can be put forth as:

Torque = Force x Moment arm

The magnitude of force typically is disseminated in Newtons (N) and the length is relayed using meters (m), thus implying that the unit for torque is Newton-meters (Nm).

Learn more about torque on

https://brainly.com/question/20691242

#SPJ1

a needle nose projectile is traveling at mach 3 through an atmosphere composed completely of helium. it passes 200m above an astronaut observer. determine how far beyond the observer (closest answer in meters) the projectile will first be heard. the ambient temperature is 300k.

Answers

The projectile will be first heard approximately 119 meters beyond the observer.

Projectile speed (Mach) = 3

Observer height = 200 m

Ambient temperature = 300 K

To determine how far beyond the observer the projectile will be first heard, we can use the Mach cone angle formula, which is given by:

θ = asin(1/M)

where θ is the Mach cone angle in radians and M is the Mach number of the projectile.

Using the given Mach number of 3, we can calculate the Mach cone angle as follows:

θ = asin(1/3) ≈ 0.3398 radians

Next, we can use the formula for the distance of the Mach cone from the projectile, which is given by:

d = h * tan(θ)

where d is the distance of the Mach cone, h is the observer height, and θ is the Mach cone angle in radians.

Substituting the given values, we get:

d = 200 * tan(0.3398) ≈ 119 meters

Therefore, the projectile will be first heard approximately 119 meters beyond the observer.

To know more about Mach cone angle formula refer here:

https://brainly.com/question/14726043#

#SPJ11

now, select two slits and a slit separation of 1750 nm . (keep the slit widths and barrier location the same as in part c, and be sure the amplitude is still set to the highest setting). which statement best describes how the intensity of light on the screen behaves?

Answers

Based on the information provided about a double-slit experiment with a slit separation of 1750 nm (nanometers), assuming the slit widths and barrier location remain the same as in part c, and the amplitude is set to the highest setting, the most likely description of how the intensity of light on the screen behaves is:

1. Interference pattern: The intensity of light on the screen would exhibit an interference pattern, characterized by bright fringes (constructive interference) and dark fringes (destructive interference). This is a well-known phenomenon in double-slit experiments, where light waves from the two slits interfere with each other, resulting in a pattern of bright and dark regions on the screen.

The specific pattern of bright and dark fringes would depend on the wavelength of the light used, the slit separation, and the slit widths. In general, the intensity of light on the screen would be highest at the center of the pattern (central maximum) and gradually decrease towards the edges of the pattern (secondary maxima) with alternating bright and dark fringes.

It's worth noting that the exact behavior of the intensity of light on the screen in a double-slit experiment can be more complex and may also depend on other factors such as the distance between the slits and the screen, the size of the slits, and the overall experimental setup.

However, based on the information provided, an interference pattern with bright and dark fringes is the most likely description of how the intensity of light on the screen would behave.

To know more about double-slit experiment  refer here :-

https://brainly.com/question/30727105#

#SPJ11

a diverging lens has a focal length of magnitude 15.2 cm. (a) locate the images for each of the following object distances. 30.4 cm distance cm location ---select--- 15.2 cm distance cm location ---select--- 7.6 cm distance cm location ---select--- (b) is the image for the object at distance 30.4 real or virtual? real virtual is the image for the object at distance 15.2 real or virtual? real virtual is the image for the object at distance 7.6 real or virtual? real virtual (c) is the image for the object at distance 30.4 upright or inverted? upright inverted is the image for the object at distance 15.2 upright or inverted? upright inverted is the image for the object at distance 7.6 upright or inverted? upright inverted (d) find the magnification for the object at distance 30.4 cm. find the magnification for the object at distance 15.2 cm. find the magnification for the object at distance 7.6 cm.

Answers

(a) The images will be located at 22.8 cm behind the lens, (b) the third object's image is virtual, (c) the distance of third object is 7.6 cm and (d) the magnification is -3 hence, image is real and enlarged.

The images which have a positive distance will give positive and real images from diverging lenses and the images that have negative distances will give virtual images. The focal length of magnitude  = 15.2 cm

(a) To find the images for each object distance,

1/f = 1/do + 1/di

The first object distance =  30.4 cm

1/15.2 = 1/30.4 + 1/di

di = 22.8 cm

The image is located 22.8 cm away from the lens for an object which has a distance of 30.4 cm. The second object distance = 15.2 cm:

1/15.2 = 1/15.2 + 1/di

di = infinity

The third object distance = 7.6 cm

1/15.2 = 1/7.6 + 1/di

di = -22.8 cm

The image is located 22.8 cm behind the lens.

(b) The first object's distance of 30.4 cm, di = 22.8 cm. It is positive, so the image is real. The second object's distance of 15.2 cm, di = infinity. It is not a finite value, so the image is virtual. The third object's distance of 7.6 cm, di = -22.8 cm. It is negative, so the image is virtual.

(c) For the first object distance = 30.4 cm, The image is inverted. For the second object distance = 15.2 cm, the image is virtual and upright. For the third object distance = 7.6 cm, the image is virtual and upright.

(d) For the first object distance of 30.4 cm:

magnification = -22.8 cm / 30.4 cm = -0.75. The image is smaller than the object and inverted. For the second object distance of 15.2 cm:

m = -infinity / 15.2 cm = 0. The magnification is 0. The image is the same size as the object. For the third object distance of 7.6 cm:

m = -22.8 cm / 7.6 cm = -3

The magnification is -3. The image is larger than the object and inverted.

To learn more about Magnification

brainly.com/question/29356454

#SPJ4

The images formed by a diverging lens are virtual, upright, and located at a distance equal to twice the focal length.

Are the images produced by a diverging lens real or virtual?

Diverging lenses have a negative focal length, which means they always form virtual images. The magnitude of the focal length represents the distance at which the virtual image is formed. For an object placed at a distance of 30.4 cm from a diverging lens with a focal length of 15.2 cm, the virtual image is formed at a distance of 15.2 cm on the same side as the object. Similarly, for an object placed at a distance of 15.2 cm or 7.6 cm from the lens, the virtual images are formed at distances of 30.4 cm and 45.6 cm, respectively. The virtual images formed by a diverging lens are always upright, indicating that they have the same orientation as the object.

Learn more about Diverging Lens

brainly.com/question/28348284

#SPJ11

A baseball player uses a bat to hit a 0. 145-kilogram stationary baseball with a force of 18 436 newtons. What is the force, in newtons, on the player's bat?

Answers

The force on the bat is also 18,436 newtons. This is because the bat and the ball experience the same force but in opposite directions. When the bat exerts a force on the ball, the ball exerts an equal and opposite force on the bat, according to Newton's third law.

Newton's third law of motion states that for every action, there is an equal and opposite reaction. In other words, when one object exerts a force on another object, the second object exerts an equal and opposite force back on the first object. This law applies to all objects in the universe, from the smallest subatomic particles to the largest celestial bodies.

The forces can be contact forces, such as the force exerted by a person pushing on a wall, or non-contact forces, such as the force of gravity between two objects. For example, when a person jumps, they exert a force on the ground, and the ground exerts an equal and opposite force back on the person, propelling them upwards. Similarly, when a rocket expels gas out of its engines, the gas exerts a force on the rocket, and the rocket exerts an equal and opposite force on the gas, propelling the rocket forward.

To learn more about Newton's third law visit here:

brainly.com/question/29768600

#SPJ4

Kepler's second law ("law of equal areas") expresses the fact that

Answers

Kepler's second law, also known as the "law of equal areas," states that a line connecting a planet to the sun sweeps out equal areas in equal intervals of time.

This means that when a planet is closer to the sun, it moves faster and covers a greater distance in a shorter amount of time. As it moves farther away from the sun, it slows down and covers less distance in the same amount of time. Despite these variations in speed, the areas swept out by the planet in equal time intervals are always equal. This law implies that the planet travels faster when it is close to the Sun and slower when it is further away. The law of equal areas states that a line connecting a planet to the Sun sweeps out equal areas in equal times, no matter where the planet is in its orbit.

To learn more about Kepler's second law click here https://brainly.com/question/30767101

#SPJ11

A solid cylinder of mass 2kg and radius 50cm rolls up an inclined plane of angle of inclination 30∘. The centre of mass of cylinder has speed of 4 m/s. The distance travelled by the cylinder on the incline surface will be (Take g=10 m/s2)A 2. 2mB 2. 4mC 1. 2mD 1. 6m

Answers

The distance traveled by the cylinder on the incline surface is option D-1.6m.

When a cylinder rolls up an inclined plane, its motion can be analyzed using both translational and rotational kinematics.

We can use the conservation of mechanical energy to relate the translational and rotational motion of the cylinder:

1/2 mv² + 1/2 Iω² = mgh

For a solid cylinder rolling without slipping, the moment of inertia is I = 1/2 mr², where r is the radius of the cylinder. Substituting the values and simplifying, we get:

1/2 (2 kg) (4 m/s)² + 1/2 (1/2)(2 kg)(0.5 m)² ω² = (2 kg)(10 m/s²)h

Solving for ω, we get:

ω = 4 m/s / 0.5 m = 8 rad/s

The distance traveled by the cylinder on the incline surface is the length of the incline, which is h/sinθ, where θ is the angle of inclination. Substituting the values, we get:

h = 2/5 sin(30∘) = 1.6 m

To learn more about distance here:

https://brainly.com/question/15172156

#SPJ4

opuestos write an adjective with the opposite meaning. question 1 with 1 blank 1 of 1 cerrado question 2 with 1 blank 1 of 1 alegre question 3 with 1 blank 1 of 1 ordenado question 4 with 1 blank 1 of 1 sucio 2 emparejar match the sentence parts. three items from the list will not be used. cuando los estudiantes tienen problemas, los profe

Answers

Opposites:

abierto (open)

triste (sad)

desordenado (disorganized)

limpio (clean)

Sentence matching:

"When students have problems, teachers"

A. Les dan soluciones (give them solutions)

B. Escuchan y hablan con ellos (listen and talk to them)

C. Los ignoran (ignore them)

Answer: B. Escuchan y hablan con ellos (listen and talk to them)

To know more about the Opposite adjectives refer here :

https://brainly.com/question/11385993#

#SPJ11

Why are the scientists so confident that they have succeeded in making a detection?

Answers

Scientists are confident that they have succeeded in making a detection when they have observed a signal that is consistent with the predicted characteristics of the phenomenon they are trying to observe.

When this signal is statistically significant, meaning that it is unlikely to have occurred by chance. For example, in the case of gravitational wave detection, scientists use highly sensitive detectors, such as the Laser Interferometer Gravitational-Wave Observatory (LIGO) to measure minuscule distortions in space-time caused by passing gravitational waves.

When the data from the detectors is analyzed, scientists look for signals that match the predicted waveform of a gravitational wave. They also use statistical methods to determine the probability that the observed signal is not just random noise.

If the observed signal matches the predicted waveform and has a low probability of occurring by chance, scientists can be confident that they have made a detection. However, it is important to note that these detections are often very difficult to make and require a high level of precision and accuracy in both the instruments and the analysis techniques used.

Therefore, scientists also subject their findings to rigorous peer review and validation by independent researchers to confirm the validity of their results.

Learn more about LIGO here:- brainly.com/question/30722973

#SPJ11

a 200g air-track glider is attached to a spring. the glider is pushed in 10 cm and released. a student with a stopwatch finds that 10 oscillations take 12.0 s. what is the spring constant?

Answers

The spring constant is approximately 2.936 N/m.

To find the spring constant, we can use the formula for the period of a spring-mass system:

T = 2π√(m/k), where

T is the period,

m is the mass of the glider, and

k is the spring constant.
First, let's determine the period (T) for one oscillation. Since 10 oscillations take 12.0 seconds, one oscillation takes 12.0 s / 10 = 1.2 s.
Now, we can rearrange the formula to solve for k:
k = m / (T / 2π)^2
The mass (m) is given as 200g, which we convert to kg: 200g / 1000 = 0.2 kg.
Now, plug in the values and solve for k:
k = 0.2 kg / (1.2 s / 2π)^2
k ≈ 2.936 N/m
The spring constant is approximately 2.936 N/m.

To learn more about oscillation, click here:

https://brainly.com/question/30111348

#SPJ11

the heat loss through a window (r-3) is 11 mmbtu/year. calculate the payback period (in years) if argon is filled in the window to increase the effective r-value of the window to 8. assume the heating price is $13/mmbtu, and the cost for filling argon is $38. answer to two decimal places without a unit.

Answers

The payback period is approximately 3.14 years.

To calculate the payback period, we need to find the cost of heat loss before and after filling the window with argon gas. The cost of heat loss can be calculated using the formula:

Cost of heat loss = Heat loss * Heating price

Before filling the window with argon gas, the cost of heat loss is:

Cost of heat loss before = 11 mmbtu/year * $13/mmbtu = $143/year

After filling the window with argon gas, the effective R-value of the window increases from 3 to 8. The heat loss can be calculated using the formula:

Heat loss = Temperature difference / Effective R-value

Assuming the temperature difference across the window is constant, the heat loss after filling the window with argon gas is:

Heat loss after = Temperature difference / 8

The cost of heat loss after filling the window with argon gas is:

Cost of heat loss after = Heat loss after * Heating price

To calculate the payback period, we need to find the time it takes for the cost savings to equal the cost of filling the window with argon gas. The cost savings per year is:

Cost savings per year = Cost of heat loss before - Cost of heat loss after

The payback period can be calculated using the formula:

Payback period = Cost of filling the window with argon gas / Cost savings per year

Plugging in the values, we get:

Payback period = $38 / ($143 - (Temperature difference / 8 * $13))

Assuming a temperature difference of 10°F, we get:

Payback period = $38 / ($143 - (10 / 8 * $13)) = 3.14 years (rounded to two decimal places)

To know more about payback period, refer here:
https://brainly.com/question/13978071#
#SPJ11

A 50 kg skater at rest on a frictionless rink throws a 2 kg ball, giving the ball a velocity of 20 m/s. What is the subsequent motion of the skater?

Answers

Answer:

Momentum of ball = mass of ball x velocity of ball

P(ball) = 2 kg x 20 m/s = 40 kg*m/s

Explanation:

According to the law of conservation of momentum, the total momentum of the system (skater and ball) must remain constant before and after the throw.

Let's first calculate the momentum of the ball:

Momentum of ball = mass of ball x velocity of ball

P(ball) = 2 kg x 20 m/s = 40 kg*m/s

Since the skater was at rest before throwing the ball, the initial momentum of the system was 0. Therefore, the final momentum of the system after the throw must also be 40 kg*m/s to conserve momentum.

The momentum of the skater after the throw can be calculated as follows:

P(skater) = P(system) - P(ball)

P(skater) = 40 kgm/s - (2 kg x 20 m/s)

P(skater) = 0 kgm/s

This means that the skater has no momentum after throwing the ball. Since momentum is equal to mass times velocity, the skater's velocity must also be 0. Therefore, the skater remains at rest on the frictionless rink after throwing the ball.

please help me :):):):):):):)

Answers

The parallel component of weight is  98.0 N. The correct option is A.

The parallel component of a force is the component of the force that acts in the direction of motion or along a specified axis. It can also be referred to as the component of the force that contributes to the movement or acceleration of an object in a particular direction.

The parallel component of weight is given by the formula Wsinθ, where W is the weight and θ is the angle of the slope.

So, the parallel component of weight = 20.0 kg x 9.81 m/s² x sin(30°) = 98.0 N.

Therefore, the answer is option A. 98.0 N.

To learn more about the parallel component click:

https://brainly.com/question/13994004

#SPJ1

A hot air balloon rises at a constant speed of 13 meters/second relative to the air. There is a wind blowing eastwards at a speed of 0. 7 meters/second relative to the ground. What is the magnitude and direction of the balloon’s velocity relative to the ground? Use the Pythagorean theorem to verify the answer

Answers

As expected, we get the same result for the magnitude.

The magnitude and direction of the balloon's velocity relative to the ground, we need to combine the velocity of the balloon relative to the air with the velocity of the air relative to the ground.

Let's start by considering the balloon's velocity relative to the air. We are given that the balloon rises at a constant speed of 13 meters/second relative to the air. Let's call this velocity vector v1.

Next, we need to consider the velocity of the air relative to the ground. We are given that there is a wind blowing eastwards at a speed of 0.7 meters/second relative to the ground. Let's call this velocity vector v2, pointing in the east direction.

The balloon's velocity relative to the ground, we can add the two velocity vectors using vector addition.

Let's start by finding the resulting vector's magnitude:

[tex]|v| = \sqrt{((13 m/s)^2 + (0.7 m/s)^2)\\} = \sqrt{(169.69 + 0.49)} \\= \sqrt{(170.18)}[/tex]

|v| = 13.05 m/s

theta = 86.3 degrees

Therefore, the magnitude of the balloon's velocity relative to the ground is 13.05 m/s, and the direction is 86.3 degrees east of north.

To verify this result using the Pythagorean theorem, we can calculate the horizontal and vertical components of the resulting vector and use them to calculate the magnitude:

vx = 0.7 m/s (eastward component of v2)

vy = 13 m/s (upward component of v1)

[tex]|v| = \sqrt{(vx^2 + vy^2)} \\= \sqrt{((0.7 m/s)^2 + (13 m/s)^2)} \\\= \sqrt{(170.18)}[/tex]

|v| = 13.05 m/s

Learn more about magnitude visit: brainly.com/question/30337362

#SPJ4

Voltage in a circuit can be calculated using the equation:
VOLTAGE = CURRENT X RESISTANCE
VOLTAGE, CURRENT AND RESISTANCE CALCULATIONS
The unit of measurement for Voltage is the Volt (V), for Current, it is Amperes
(Amp) and for Resistance it is Ohms (2).
Complete the triangle to the right using V, I and R.
(The first line for each answer is for the correct EQUATION).
1a. Calculate the voltage in a circuit where the current is 2A and the resistance is 10 Ohms.
Voltage =
11 11
Amps x
V
X

Answers

The voltage can be obtained by the use of Ohm's law as 20 V.

What is the Ohm's law?

The Ohm's law states that; the current (I) via a conductor between two places is directly proportional to the voltage (V) between the two sites and inversely proportional to the resistance (R) between them if the temperature and other physical factors remain constant.

By the use of the Ohm's law, we know that;

V = IR

I = 2A

R = 10 ohms

V = 2 * 10

V = 20 V

Thus the voltage that is required by the question is 20 V

Learn more about Ohm's law:https://brainly.com/question/1247379

#SPJ1

Other Questions
Given a normalized probability density function P(x) of finding the variable x in the interval [x, x + dx], write the definition for a) the mean value (x), b) the variance o2 = ((x - (x))), and c) the standard deviation of the variable x. Good competitive intelligence about rivals' strategies, their financial performance, their competitive strengths and weaknesses, the actions and plans they have announced, and the thinking and leadership styles of their executives is valuable because o it enables a company to predict or anticipate what important actions rivals are likely to take next, to be ready with defensive countermoves, and to take rivals' probable actions into account in crafting its own best course of action. O it enables more accurate predictions about which rivals will try to move to a different strategic group, which rivals are most likely to be acquired or merge with another company, and which rivals are strong candidates to leave the industry. O it helps company managers determine which rivals have weak or flawed strategies and which rivals are candidates to exit the industry o it enables a company's managers to make more accurate predictions about future industry driving forces and key success factors and to optimize their selection of which strategic group to be in O good scouting reports on competitors help identify which strategic group the company needs to be in, which strategy elements of rivals should be avoided, and which strategy Slements of rivals are most successful and should be incorporated into the company's own strategy How much does cardiovascular risk increase for each increment of 20 mm Hg systolic and 10 mm Hg diastolic in blood pressure?A) 25%B) 50%C) 75%D) 100% what ud a factor of a natural number A small manufacturing facility is being planned that will feed parts to three heavy manufacturing facilities. The locations of the current plants with their coordinates and volume requirements are given in the following table:PLANT LOCATION COORDINATES (x, y) VOLUME(PARTS PER YEAR) Peoria 293, 302 4,250 Decatur 382, 464 5,850 Joliet 473, 178 3,000Use the centroid method to determine the best location for this new facility. (Round your answers to 1 decimal place.) My analytics tells me that last week my site had 3,000 visits but only 2,500 visitors. What explains this discrepancy?a. The tracking code was not working on 500 visitors.b. 500 visitors did not count because they did not enter the site from the homepage.c. 500 visitors bounced after only one page view, so they did not count as a complete visit.d. Some visitors made multiple visits. When writing regarding a claim or adjustment, the opening should state the problem as well as A) who is at fault.B) competitive options.C) how the issue has affected the business relationship.D) model and serial number.E) your request. 1. Plot the point (-1, -3,1)-2. Consider the following data on an asset:Cost of the asset $123,000Useful life 7 yearsSalvage value $13,000Compute the annual depreciation allowances and the resulting book values, initially using the DDB and then switching to SL When Emilia looked at her cell phone bill for the month, she saw that she had spent 1/12 of her minutes talking to her mother and 5/12 of her minutes talking to her best friend. What fraction of the minutes did Emilia spend talking to either her mom or her best friend? a. Find the value of that maximizes the area of the figure.(12-4x) ft12 ftb. Find the maximum area.The maximum area is(x + 2) ftsquare feet. What must be considered in order to understand the emergence of a motor skill according to the ecological perspective? there is a ____ to ____% chance that alcohol use disorders will be inherited if family members also have the disorder 28) The conversion of amino acids to carbohydrates is an example ofA) amination.B) gluconeogenesis.C) substrate-level phosphorylation.D) beta-oxidation.E) electron transport. When a project manager assumes the role of a coach and a facilitator for the project team, in an Agile environment, this role is known as: What is the volume of this figure?Enter your answer in the box. yd T/Fmost organizations do not opt for it configurations that are purely in-house, packaged, or saasmodels Translate the sentence into an equation.Four more than the quotient of a number and 5 is 9.Use the variable b for the unknown number. Is there a rigid transformation that would map ABC to DEC? DNA of thermophiles is stabilized by binding of special nucleoid-associated proteins. (T/F)