Help PlS AFAP and thank you so much

Answer:

smooth, skeletal, cardiac

contract

actin and myosin

Explanation:

edge

Answer:

The correct answers are

smooth, skeletal, cardiac

contract

actin and myosin

Answer:

c. Efflorescent

Explanation:

Some hydrated salts, when exposed to the atmosphere, give off part of all of their water of crystallization spontaneously to form a lower dehydrated or anhydrous salt. Such salts are known as efflorescent and the phenomenon is called Efflorescence.

Efflorescence occurs when the hydrate's aqueous vapor pressure is greater than the water vapor's partial pressure in the air. For example, because the vapor pressures of washing soda (Na2CO3·10H2O) and Glauber's salt (Na2SO4·10H2O) normally exceed that of the water vapor in the atmosphere, these salts effloresce (i.e., lose all or part of their water of hydration), and their surfaces assume a powdery appearance.

Answer:

Black

Explanation:

hope it helps

have a nice time ..,

Considering the definition of the law of conservation of matter, the law of conservation of matter establishes that matter cannot be created or destroyed (option C).

The law of conservation of matter holds that, within a closed system, the amount of matter involved in a chemical reaction is constant, meaning a closed system means an environment that isolates the components involved in the reaction from the outside.

In other words, this law establishes that the mass of the reactants consumed is equal to the mass of the products obtained, even though they have been transformed into each other.

In other words, the law of conservation of matter states that matter is neither created nor destroyed during a chemical reaction, it is only transformed.

In summary, the law of conservation of matter establishes that matter cannot be created or destroyed (option C).

Learn more about the law of conservation of matter:

https://brainly.com/question/24568883

https://brainly.com/question/24783543

#SPJ1

Answer:

A=no

B= yes when liquid or solution

C=yes

D=no

E=yes

Explanation:

According to the given table, the placement of items A-E are

A) ⇒ No

B) ⇒Yes, when liquid or solution

C) ⇒Yes

D) ⇒No

E) ⇒Yes

What is conductivity and Malleability?

Malleability - Those metals that can be beaten into thin sheets with a hammer or any heavy object. For example - Cu, Au etc

Conductivity - Conductivity is the measure of the ease at which an electric charge or heat can pass through a material. For example - Metals are good conductors of heat and electrolytic solution is conductors of electricity.

Therefore, according to the given table, the placement of items A-E are

A) ⇒ No

B) ⇒Yes, when liquid or solution

C) ⇒Yes

D) ⇒No

E) ⇒Yes

Learn more about Malleability and conductivity, here:

https://brainly.com/question/1349130

#SPJ3

Answer:

it is 1 because of it is below 7 then it will be dangerous for humans

The pH of the highly corrosive acid, given the data from the question is 1

This is simply a measure of the acidity / alkalinity of a solution.

The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration

The pH scale is a scale that gives an understanding of the variation of the acidity / alkalinity of a solution.

The scale ranges from 0 to 14 indicating:

NOTE: The lesser the pH of a substance, the more acidic (corrosive) it is and the greater the pH of the substance, the less acidic (corrosive) it is.

With the above information about pH, we can conclude that the pH of the highly corrosive acid, given the data is 1

Learn more about pH:

https://brainly.com/question/3709867

#SPJ2

Answer:

3ZnCl2 + 2(NH4)3PO4 → Zn3(PO4)2 + 6NH4Cl

Explanation:

Zinc Chloride + Tribasic Ammonium Phosphate = Zinc Phosphate + Ammonium Chloride

Reaction Type

Double Displacement (Metathesis)

Reactants

Zinc Chloride - ZnCl2

Zinc(II) Chloride Zinc Chloride, Anhydrous Dichlorozinc Butter Of Zinc Zinc Chloride Zn-65

Molar Mass of ZnCl2 Oxidation State of ZnCl2

Tribasic Ammonium Phosphate - (NH4)3PO4

Ammonium Phosphate

Molar Mass of H12N3O4P Oxidation State of H12N3O4P

Products

Zinc Phosphate - Zn3(PO4)2

Zinc(II) Phosphate

Molar Mass of O8P2Zn3 Oxidation State of O8P2Zn3

Ammonium Chloride - NH4Cl

Amchlor Ammoneric Ammonium Muriate Darammon Sal Ammonia Sal Ammoniac Salammonite Salmiac

Molar Mass of ClH4N Oxidation State of ClH4N

Answer: Here u go!

Explanation:

The electron cloud of argon is thus larger and more polarized, able able to express mawr inter molecular forces Vander Waals forces, which results in a higher boiling point due to these increase forces. Due to this, the boiling point of argon is higher are gone. We can see its boiling point is 87.2 Kelvin's, whereas a neon and spoiling point is 24.5.

Hope this helps!

Explanation:

Argon has an atomic number of 18, while neon has an atomic number of 10.

The atomic radius is comprised of the atom’s nucleus and electron cloud. As you go down on the periodic table, the effective nuclear charge decreases. This results in more screening of the electrons

from the nucleus (decreasing the attraction between the nucleus and the electrons) resulting in a larger atomic radius.

However, because they’re both noble gasses, the size difference in this case can be easier described by the number of particles in each atom.

Argon has 18 protons, 18 electrons and 22 neutrons.

Neon has 10 protons, 10 electrons and 10 neutrons.As you can see, argon has more “stuff.”

The increase in protons and electrons in particular results in a larger electron cloud, which means a much larger atomic radius than in neon.

i hope it helps u :)

Answer:

Pure covalent

Explanation:

To know the type of bond between two atoms you must find the electronegativity difference of them:

If electronegativity difference is:

< 0.4: Pure covalent.

Between 0.4 and 1.8: Polar covalent.

> 1.8: Ionic.

The electronegativity of Zn is 1.65 and Ni is 1.91. Electronegativity difference is:

1.91 - 1.65 =  0.26

That means the type of bond is:

Answer:

D solid

Explanation:

Answer:

The liquid can be identified

Explanation:

Given that density is defined as mass per unit volume.

We have the following information regarding the unknown liquid;

Mass= 1.40 kg = 1400 g

Volume = 1378 cm^3 = 1378 ml

Density of unknown liquid = 1400/1378 = 1.012 g/ml this is approximately 1.0 g/ml

It is possible to identify the liquid, the liquid is ethanolamine

Answer:

A

Explanation:

because they have delocalized electrons

Metals are malleable because they have delocalized electrons which are capable of forming ionic bonds.

Ionic bond or electrovalent bond is a type of bond which is formed between two elements when there is an exchange of electrons which takes place between  the atoms resulting in the formation of ions.

When the atom looses an electron it develops a positive charge and forms an ion called the cation while the other atom gains the electron and develops a negative charge  and forms an ion called the anion.

As the two atoms are oppositely charged they attract each other which results in the formation of a bond called the ionic bond.Compounds having ionic bonds are malleable and have high melting points.They are also brittle in nature.

Learn more about ionic bond,here:

https://brainly.com/question/11527546

#SPJ6

The esophagus functions primarily as a transport tube that directs the progression of food and fluids from the mouth to the stomach.

Answer:

epithelial tissue, connective tissue, muscle tissue, and nerve tissue

Explanation:

Answer:

31.67 mph

Explanation:

To calculate the average speed of the truck, we must first obtain the total distance travelled by the truck followed by the total time taken for the truck to cover the distance travelled.

The following data were obtained from the question include:

Total distance) = 30 + 45 + 50 + 65 = 190 miles

Total time = 1 + 2 +1 +2 = 6 hours

Average speed =.?

Average speed = Total distance / Total time

Average speed = 190 /6

Average speed = 31.67 mph

Therefore, the average speed of the truck is 31.67 mph

Answer:

Ultraviolet light.

Explanation:

Uranium is a natural radioactive chemical element with the chemical symbol "U" and an atomic number of 92. Uranium is used for generating nuclear fuels which are typically used in powering atomic bombs and nuclear reactors in the field of electricity generation.

When ignited, a uranium compound burns with a green flame. The wavelength of the light given off by this flame is greater than that of ultraviolet light which typically ranges from 100nm to 400nm. Where, nm is represents nanometer.

Basically, when ignited, a uranium compound burns with a green flame having a wavelength of 4.30 x 10^-7m to 5 x 10^-7m.

Answer:

compound ahhhhhhhhhhhhhgh

Answer: The answer is D

Explanation: I took the quiz just now and got it right

The correct answer is:

D.(a vesicle encloses over a nutrient molecule)

I took the test, hope this helps!

Answer:

The number of its protons and electrons are 82 each

Explanation:

Atomic no of an element = 82

Atomic no = No of protons

⇒ No of protons = 82

Electrons are negatively charged particle and Protons are positively charged particles.

No of electrons = 82

Hence, the element is Lead with 82 protons and electrons

Answer:

true

Explanation:

photons are emitted when electrons move from from a lower energy level to a higher energy level

Answer:

First Question: in order to better explain what is happening during a phenomenon

Second Question: show beginning, middle and end if it fits the phenomenon; use zoom in bubbles to show the unobservable

Third Question: the type of material used to create the model

Explanation:

First Question: You would not revise a model to "cover up evidence," that's scientifically immoral and should not be done, and showing off to other scientists is not the point of revising something.

Second Question: You should use more than one color to differentiate different parts of the model, but don't overwhelm it with color. There should be some labels in the model, so some writing is necessary.

Third Question: Inaccurate color representation does not technically limit a model unless color scheme is important, so this could be an answer, but not likely. A messy model limits a model because it makes it hard to read. Approximating shapes is a limitation because it portrays an incorrect representation of what system the model is of. The type of material used to create the model is most likely the right answer.

Answer:

2 Nitrogen

Explanation:

This is because it says Diammonium Hydrogen Phosphate. Here. (NH4)3PO4 is one way to write this. However, another way to write this is (NH4)2HPO4. There should be in fact two ammonium groups, NH4 and 1 Hydrogen to get 3+ charge to balance the 3- charge from the Phosphate.

Answer:

3.35g of Ba3(PO4)2

Explanation:

The balanced chemical equation is given as;

3 BaCl2 + 2 Na3PO4 → 6 NaCl + Ba3(PO4)2

Fro the reaction;

3 mol of BaCl2 (624g) reacts wth 2 mol of Na3PO4 (327.88g) to form 1 mol of Ba3(PO4)2 (601.93g)

Since Na3PO4 is in excess, the limiting reactant is; BaCl2. It would determine how much of Ba3(PO4)2 is formed.

624g of BaCl2 = 601.93g of Ba3(PO4)2

4.512g of BaCl2= xg of Ba3(PO4)2

x = 4.512g * 601.93g / 624g

x = 3.35g of Ba3(PO4)2

The mass of barium phosphate synthesized is 3.612 g.

The equation of the reaction is;

3 BaCl2.2H2O + 2 Na3PO4.12 H2O → 6 NaCl + Ba3(PO4)2 + 14H2O

Molar mass of barium chloride dihydrate = 244.26 g/mol

The number of moles of barium chloride dihydrate =  4.512 g/244.26 g/mol

= 0.018 moles

From the balanced reaction equation shown;

If 3 moles of barium chloride dihydrate yields 1 mole of  barium phosphate

0.018 moles of  barium chloride dihydrate yields 0.018 moles × 1 mole/3 moles

= 0.006 mole of barium phosphate

Mass of barium phosphate = 602 g/mol × 0.006 mole

= 3.612 g

Learn more: https://brainly.com/question/9743981

Answer:

31.5 moles

Explanation:

Volume of H2O = 0.567 L

Number of mole of H2O =.?

Next, we shall convert 0.567 L to millilitres (mL). This can be obtained as follow:

1 L = 1000 mL

Therefore,

0.567 L = 0.567 L × 1000 mL / 1 L

0.567 L = 567 mL

Thus, 0.567 L is equivalent to 567 mL.

Next, we shall convert 567 mL to grams (g). This can be obtained as follow:

1 mL of H2O = 1 g

Therefore

567 mL of H2O = 567 g of H2O

Finally, we shall determine the number of mole in 567 g of H2O. This can be obtained as follow:

Mass of H2O = 567 g

Molar mass of H2O = (2×1) + 16

= 2 + 16 = 18 g/mol

Mole of H2O =?

Mole = mass /Molar mass

Mole of H2O = 567 /18

Mole of H2O = 31.5 moles