Answers
Answer:
b) (i): 0.91 Amgstroms
(ii): 9.1 × 10^-11 Angstroms
(c): Volume = 20 Angstroms
Explanation:
• Let's first convert the units:
[tex]{ \rm{1 \:nanometre = 1 \times {10}^{ - 9} \: metres} } \\ { \rm{10 \: angstroms = 1 \times {10}^{ - 9} \: metres}} \\ { \rm{1 \: micrometer = 1 \times {10}^{ - 6} \: metres = 1000 \: nm}} \\ \\ { \rm{1 \: {nm}^{3} = 1000 \: {angstroms}^{3} }}[/tex]
Question (b)
(i)[tex]{ \rm{radius = \frac{diameter}{2} }} \\ \\ { \rm{radius = \frac{0.182}{2} }} \\ \\ { \rm{radius = 0.091 \: nm}} \\ \\ { \mathfrak{ answer{ : { \rm{radius = (0.091 \times 10) \: angstroms}}}}} \\ \\ { \rm{radius = 0.91 \: angstroms}}[/tex]
(ii)[tex]{ \rm{radius = 0.091 \: nm}} \\ \\ { \rm{radius = 0.091 \times( 1 \times {10}^{ - 9} ) \: metres}} \\ \\ { \rm{radius = 9.1 \times {10}^{ - 11} \: m }}[/tex]
(c)[tex]{ \rm{volume = (0.5 \times 0.2) \: nm \times 0.0002 \: micrometer}} \\ \\ { \rm{volume = 0.5nm \times 0.2nm \times (0.0002 \times 1000)nm}} \\ \\ { \rm{volume = 0.5 \times 0.2 \times 0.2 \: nm {}^{3} }} \\ \\ { \rm{volume = 0.02 \: nm {}^{3} }} \\ \\ { \rm{volume = (1000 \times 0.02) \: angstroms {}^{3} }} \\ \\ { \rm{volume = 20 \: angstroms}}[/tex]
Related Questions
Which are included in the inflammatory response? Select three options.painswellingantibodiesmucusredness
Answers
Ores contain enough metal to make extraction of the metal ______
economical.
reversible.
carbon neutral.
Answers
Answer:
oxide
Explanation:
Balance the following equation: __Na+__H₂O ➞ __NaOH+__H₂ *
Answers
Answer:
4 4 8 4 is the balanced equation
what is the difference between hypertonic and hypotonic
Answers
Picture:
Meaning of hypertonic: (1): having a higher osmotic pressure than a particular fluid, typically a body fluid or intracellular fluid. (2) of or in a state of abnormally high muscle tone.
I NEED HELP!!!! URGENTLY!!!! I HAVE TO GET THIS DONE THIS WEEK!!!! WILL GIVE BRAINLIEST!!!!
1. You learned that waves in the ocean, sound waves, and light waves all have certain things in common. They all carry energy. The velocity, frequency, and wavelength of each is connected by the same equation. Which type of wave would you most want to learn more about? Why does it interest you? What would you want to find out about it? Write your answers in 2-3 paragraphs. (10 points) Would you like to know more about how waves in the ocean move, how sound travels, or how light works?
2. If you could somehow travel inside an atom and look around, what part of the atom would you want to look at? Why? What would you want to understand better as a result of your "travels"? Write your answers in 2-3 paragraphs. (10 points) Do electrons or the nucleus interest you more? What questions do you still have about how an atom works?
Answers
Answer:
Explanation:
1) I personally would want to learn more about how the waves in the ocean move. About what causes high tide. What causes low tide. Why some waves are big and some small.
I know it has something to do with the gravitational pull of the moon. But that is as far as my knowledge extends on the subject. I have always been fascinated with the secrets of the ocean and the secrets of space. To me learning, this is a little of both.
2) The nature of the interaction between neutrons and protons in the atomic nucleus, which binds the nucleons together, is the biggest wonder in the inside of the atom that I would like to really know. Protons have a positive charge, but neutrons do not. What form of interaction between a charged particle and an uncharged particle is possible? That is what I expect to learn more about as a result of my explorations into the inner workings of the atom.
The inside of the atom is made up of the nucleus and electrons that travel about in orbits. The nucleus is made up of protons and neutrons. Electrons have a negative charge, protons have a positive charge, and neutrons have none. The nucleus is held together by electrostatic interaction between electrons and protons. The majority of the mass of an atom is made up of protons and neutrons.
I'm interested in finding out more about ocean waves travel. regarding the reason for high tide. what brings on a low tide. Although some waves become also large while others are smaller.
What are ocean waves?Ocean waves seem to be alterations to the ocean's surface. They could be produced by water being moved by the wind, gravity, as well as other forces.
What are waves?A disturbance that moves from one place to another across a medium has been referred to as a wave. As an illustration of a wave, think of a sinuous wave.
Personally, I'm interested in finding out more about ocean waves travel. regarding the reason for high tide. what brings on a low tide. Although some waves become also large while others are smaller I'm certain that the moon's gravitational force is somehow implicated. Because that is basically the extent of my expertise on the matter. The mysteries of the water and the mysteries of space have always interested me. I'm still learning, so this combines a bit of both.The largest enigma in the interior of the atom something I would really like to understand is the nature of the connection involving neutrons as well as protons in the nucleus of an atom, which holds the nucleons together. Neutrons just don't have a positive electrical charge, whereas protons do. What kind of interactions is conceivable between charged as well as uncharged particles. Through my investigations into the internal workings of the atom, I hope to understand more about it.
To know more about Ocean waves and waves.
https://brainly.com/question/8705558
#SPJ2
What is the formula for atomic weight amu of neon
Answers
Answer:
abundance of the first isotope times the Mass of the first isotope
How quickly the electron are moving through the circuit
A.Resistance
B.voltage
C.current
2.The strength with which electrons are pushed through the circuit?
A.Resistance
B.voltage
Current
Answers
Answer:
B
Explanation:
because the electrons are moving fast
11.
What is the missing product from this reaction?
32 32
15P → 16S +
a.
4.
2 He
b.
0
10
C.
0
or
d.
0
le
e.
0
1P
Answers
Answer:
good times
Explanation:
always nedded
Here the nuclear decay of phosphorous to give S-32 is an example of beta-decay. Hence, the emitted particle is an electron. Thus, option b is correct.
What is beta decay ?The heavy unstable radioactive isotopes undergo nuclear decay by the emission of alpha or beta particle. Thus, there are mostly two types of decays, alpha decay and beta decay.
In alpha decay, the isotope emits a helium nuclei. Hence, mass number decreases by 4 units and atomic number decreases by 2 units. In beta decay, mass number does not change but atomic number increases by 1.
Here, P-32 undergo beta -decay by emitting an electron to form S -32. Hence, atomic number is increased by one. Therefore, the mission product is an electron option b.
Find more on beta- decay:
https://brainly.com/question/12448836
#SPJ6
Page. 5. What is the position of alkali metals in the Modern periodec table.
Answers
What is the position of alkali metals in the Modern periodic table.
Answer:-They are placed in the IA group, which is the first column on the left side of the periodic table.
Explanation:-Alkali metals are placed on the first column (IA)
(lithium, sodium, potassium, rubidium, cesium, francium)
Which answer is it for number 7
Answers
Answer:
The answer is I
The 4 one represents Solids coz in solids atoms are tightly packed
How many atoms are in 80.45 g of magnesium with explanation
Answers
Answer:
There are 1.9926 * 10 ^24 atoms.
Explanation:
M ( Mg ) = 80.45 g
We can find the molar mass of magnesium in the Periodic table:
M ( Mg ) = 24.31 g / mole
n = 80.45 g : 24.31 g/mole = 3.31 moles
N a ( Avogadro`s constant ) = 6.02 * 10 ^23
N = Na * n = 6.02 * 10 ^24 * 3.31 = 19.926 * 10 ^23
The drummer is the best performer. What is the noun in this sentence
Answers
Answer:
Performer if not I say drummer
let me know the answer!
Explanation:
Polyester is a synthetic material used for many different purposes. It is produced from petroleum and natural gas. Producing polyester from these natural resources requires many steps and uses other chemicals that are potentially harmful. Polyester production also requires a lot of energy. Although polyester is not biodegradable, it is easily recyclable.
Which statement about synthetic materials is best supported by the example of polyester?
A.
Using synthetic materials has a negative impact on the environment, but using natural materials does not.
B.
Synthetic materials created from petroleum and natural gas are difficult to produce and to recycle.
C.
Materials that are created from natural resources affect the environment more than those that are not.
D.
Producing certain synthetic materials could have a greater environmental impact than disposing of them.
Answers
Answer:
A. Producing certain synthetic materials could have a greater environmental impact than disposing of them.
Explanation
I just did this question and got it right.
How many total atoms are present in the compound: Mg(OH)_2
Answers
Answer:
In the compond Mg(OH)_2, 20 atoms are present.
Explanation:
One of the products when aqueous Na, CO, reacts with aqueous
Sn(NO3), is
O a. Sn(CO3)2
O b. CNO3
O c. NaSn.
O d. NaNO3
Answers
Answer:
NaNO3
balanced equation - Na2CO3 + Sn(NO3)2 → 2NaNO3 + Sn(CO3)
What is the volume, in liters, of 1.4 moles of CO2 gas at STP?
Answers
Answer:
22.4 L.
Explanation:
Can anyone pls answerrrrt
Answers
Answer:
wdym
Explanation:
hmm
[EARTH SCIENCE]
Hi, can anyone help please? Thank uuuu!!! :D
The relationship between the average distance of a planet from the sun and the planet’s orbital period is described by the....
A. Law of ellipses.
B. Law of equal areas.
C. Law of motion.
D. Law of periods.
Answers
Answer:
c. law of motion
Explanation:
I think I hope it helps
What is the molarity of a 75.0 mL solution that contains 0.225 g of
potassium nitrate?
Answers
Answer:
M=0.0297M
Explanation:
we know that molarity equals number of mole of solute over the volume of solution.
M=n/V but n=m/M
n=0.225g÷101g/mol =0.00223mol
M=0.00223mol/0.075l
M=0.0297M
Answer:
0.0297M
Explanation:
We will use the formula M= moles of solute/lites of solution.
First we need to figure out the Moles of the solute, to get this we first need the molar mass of KNO3 (potassimum nitrate).
The Molar Mass of potassimum nitrate is 101.103 g/mol
K - 1 x 39.09
N - 1 x 14.006
O - 3 x 15.999
KNO3 - 101.103 g/mol
Now we get the moles of the solute by doing.
0225g/ 101.103g/mol = 0.00223 mol
Put the answer into the orginal equation to get 0.00223mol / 0.045 L
Which equals to 0.0297M. This is also the correct amount of significant figures.
Which of following is not an ingredients for photosynthesis?
A. oxygen
B. carbon dioxide
C. light energy
D. water
Answers
Answer:
A. oxygen
Explanation:
Oxygen is the waste created after photosynthesis.
Answer:
oxygen
Explanation:
photosynthesis are for plants and plants don't need oxygen
10 facts about “molecules”
Answers
Answer:
Explanation:
A perfect diamond is a single molecule made of carbon atoms.
DNA is a super long molecule that has information uniquely describing every human being.
When two or more atoms chemically bond together, they form a molecule.
They are very small in size.
They have space between them.
They are in constant random motion.
molecules move when Particles move rapidly in all directions but collide with each other more frequently than in gases due to shorter distances between particles.
In 1926, French physicist Jean Perrin received the Nobel Prize in physics for proving, conclusively, the existence of molecules.
Molecules can exist in free state because they are very stable.
The smallest particle of a compound capable of existing on its own is a Molecule-not a atom.
copper cannot be used as an anode in electrolysis of water
Answers
Answer:
I hope this will help
Explanation:
Copper is purified by electrolysis . Electricity is passed through solutions containing copper compounds, such as copper(II) sulfate. The anode (positive electrode ) is made from impure copper and the cathode (negative electrode) is made from pure copper.
how many neutrons of atomic mass is 31 and atomic number is 12
Answers
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
As we know, Number of protons = Atomic Number
So,
Number of protons = 12And, Atomic mass = Number of protons + Number of Neutrons (N)
therefore ~
31 = 12 + N N = 31 - 12 N = 19Number of Neutrons = 19
1. Explain the difference between genetic, environmental, social, and pathogenic factors.
2. How do pathogens spread?
3. How can we, as humans, prevent transmission of pathogens?
4. List three ways the environment can affect personal health.
Answers
1. Genetic factors are those where the genetic condition of an individual is capable of increasing the probability of developing certain diseases.
Environmental factors include the diversity of environmental stresses such as population density, temperature, food and pollutants that impact human health.
Social factors are related to the interaction of groups through culture, social class and family structure, which also have an effect on population health.
Pathogenic factors, on the other hand, are those transmitted by agents such as viruses, fungi, bacteria and protozoa, which colonize a host by adhering to cells and evading immunity, generating diseases.
2. The transmission of pathogens can occur in several ways, such as contact with bodily fluids from infected people, cross-transmission or through being spread through particles in the air.
3. We can prevent the transmission of pathogens through proper hygiene habits, healthy eating, vaccination against infectious diseases and avoid contact with other people if you have a communicable disease.
4. The environment can affect personal health through climate change, pollution and lack of infrastructure that lead to less access to quality food and basic health conditions.
Learn more here:
https://brainly.com/question/13179079
The MSDS for propane gives it a health rating of 1, a flammability rating of 4, and a reactivity rating of 0. According to the MSDS, which best describes propane? highly corrosive highly toxic highly flammable highly reactive.
Answers
Propane has MSDS rating for flammability 4, thus the compound has been highly flammable. Thus, option C is correct.
The MSDS has been the Material Safety Data Sheet . It has been given for the compounds hazardous levels. The compounds have been checked on various parameters and ranked on the scale of 0 to 4.
The compounds being less value in the parameter has 0 value, while 4 has been the maximum value.
The MSDS rating for propane has been able to deliver the compound to be:
Health rating: 1The compound has been less positive towards the health.
Flammability: 4The compound has been highly flammable.
Reactivity: 0The compound has been least reactive.
Since, propane has MSDS rating 4 for flammability, the compound has been highly flammable. Thus, option C is correct.
For more information about the MSDS rating, refer to the link:
https://brainly.com/question/2852656
Answer:A) Highly corrosive but not highly flammable
Explanation:
right on edge :)
4. Pb + FeSO4 → PbSO4 + Fe
what type of reaction?
Answers
Oxidation- Reduction reaction
HELP!!!!! I WILL GIVE BRAINLYEST write a 250 word report on a extinct or endangered animal
Answers
Answer:
bro thats plagiarism
Explanation:
You know that a circuit is a path along which electrical charges can flow. In this activity, you are going to illustrate that the flow of electricity needs a closed circuit. Your task is draw the wires that connect these objects in order to create a closed circuit. In the space provided, write one sentence that identifies why this circuit allows electrical charges to flow. Be sure to include each object in your answer.
Answers
Answer:
I cant do it for you but to help you I can tell you this The charged particles can move only when there is a complete conducting pathway (called a 'circuit' or 'loop') from one terminal of the battery to the other.
Explanation:
H2O decomposes to hydrogen and oxygen as describe in the
following reaction:
2H20 (1) ► 2H2 (9) + O2 (9)
What is the mole fraction of hydrogen gas in the products?
a 0.5
b 0.33
C 0.4
d 0.67
Answers
PV = nRT and solve for n to determine moles of O2 collected.
n = PV/RT = (1.0222 atm)(0.5 L)/(0.0821 Latm/Kmol)(296 K) note the use of Kelvin for temperature.
n = 0.02103 moles O2
mass of O2 = 0.02103 moles x 32 g/mole = 0.67 grams (to 2 significant figures)
Can someone help me with this please
Answers
That is an ionic bond.
Explanation:
It has cations and anions