Help what's the answer?

Help What's The Answer?

Answers

Answer 1

The partial pressure of carbon dioxide in the flask is 7.10 atm and the total pressure in the flask is 11.25 atm.

What is ideal gas law?

The ideal gas law is a fundamental law of physics that describes the behavior of ideal gases under various conditions. It is expressed mathematically as PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of gas, R is the ideal gas constant, and T is the absolute temperature of the gas in Kelvin.

To find the partial pressure of carbon dioxide and total pressure in the flask, we need to use the ideal gas law:

PV = nRT

First, we need to calculate the number of moles of each gas:

nO₂ = mO₂ / MM(O₂) = 3.64 g / 32.00 g/mol = 0.1135 mol

nCO₂ = mCO₂/ MM(CO₂) = 8.53 g / 44.01 g/mol = 0.1937 mol

where m is the mass of the gas, and MM is the molar mass of the gas.

Next, we can calculate the total number of moles of gas in the flask:

ntotal = nO₂ + nCO₂ = 0.1135 mol + 0.1937 mol = 0.3072 mol

The total pressure in the flask can be calculated using the ideal gas law:

Ptotal = ntotalRT / V

where R = 0.08206 L·atm/K·mol is the gas constant.

The temperature needs to be converted to Kelvin:

T = 38°C + 273.15 = 311.15 K

Substituting the values, we get:

Ptotal = (0.3072 mol)(0.08206 L·atm/K·mol)(311.15 K) / 8.39 L

= 11.25 atm

Therefore, the total pressure in the flask is 11.25 atm.

To find the partial pressure of carbon dioxide, we need to use the mole fraction of carbon dioxide:

XCO₂ = nCO₂ / ntotal

Substituting the values, we get:

XCO₂ = 0.1937 mol / 0.3072 mol = 0.6309

The partial pressure of carbon dioxide can be calculated using Dalton's law of partial pressures:

PCO₂  = XCO₂ Ptotal

Substituting the values, we get:

PCO₂  = 0.6309 × 11.25 atm

= 7.10 atm

Therefore, the partial pressure of carbon dioxide in the flask is 7.10 atm.

Learn more about pressure here:

https://brainly.com/question/12971272

#SPJ1


Related Questions

at stp, what is the volume of 4.50 moles of nitrogen gas? at stp, what is the volume of 4.50 moles of nitrogen gas? 101 l 167 l 1230 l 60.7 l 3420 l

Answers

The volume of 4.50 moles of nitrogen gas at STP is approximately 101 L. So, the correct answer is 101 L.

At STP (standard temperature and pressure), the volume of one mole of any gas is 22.4 liters. Therefore, to find the volume of 4.50 moles of nitrogen gas at STP, we can simply multiply the number of moles by the molar volume:

At STP (Standard Temperature and Pressure), the volume of 4.50 moles of nitrogen gas (N2) can be calculated using the ideal gas law:

PV = nRT

Where P is the pressure (which is 1 atm at STP), V is the volume, n is the number of moles, R is the gas constant, and T is the temperature (which is 273.15 K at STP).

Rearranging this equation to solve for V, we get:

V = (nRT)/P

Substituting the values for n, R, P, and T, we get:

V = (4.50 mol x 0.08206 L atm K^-1 mol^-1 x 273.15 K)/1 atm

V = 101.3 L

For such more questions on STP:

https://brainly.com/question/27100414

#SPJ11

how many atmospheres of pressure would there be if you started at 5.75 atm and changed the volume from 5 l to 1 l ?

Answers

The pressure would be 28.75 atm if the volume is changed from 5 L to 1 L, starting from an initial pressure of 5.75 atm.

To solve this problem, we can use the combined gas law equation, which relates the pressure, volume, and temperature of a gas:

P1V1/T1 = P2V2/T2

where P1 and V1 are the initial pressure and volume, T1 is the initial temperature, P2 and V2 are the final pressure and volume, and T2 is the final temperature. Since the temperature is constant in this problem, we can simplify the equation to:

P1V1 = P2V2

Substituting the given values, we get:

5.75 atm × 5 L = P2 × 1 L

Solving for P2, we get:

P2 = (5.75 atm × 5 L) / 1 L = 28.75 atm.

For such more questions on Pressure:

https://brainly.com/question/24719118

#SPJ11

2 NO(g)+Cl2(g)⇌2 NOCl(g) Kc=2000
A mixture of NO(g) and Cl
2
(g) is placed in a previously evacuated container and allowed to reach equilibrium according to the chemical equation shown above When the system reaches equilibrium, the reactants and products have the concentrations listed in the following table:
Species Concentration (M)
NO(g) 0.050
C12(g) 0.050
NOCl(g) 0.50
Which of the following is true if the volume of the container is decreased by one-half?
A. Q = 100, and the reaction will proceed toward reactants.
B. Q = 100, and the reaction will proceed toward products.
C. Q = 1000, and the reaction will proceed toward reactants.
D. Q = 1000, and the reaction will proceed toward products.

Answers

Neither A, B, C nor D. The equilibrium position will not be affected by the change in volume.

To determine how the equilibrium of the reaction 2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g) will shift if the volume of the container is decreased by one-half, we first need to calculate the reaction quotient Q.

The balanced chemical equation for the reaction is:

2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g)

At equilibrium, the concentrations of the species are:

[NO] = 0.050 M

[Cl2] = 0.050 M

[NOCl] = 0.50 M

Using these values, we can calculate the value of the reaction quotient Q:

Q [tex]= [NOCl]^2 / ([NO]^2[Cl2])[/tex]= [tex](0.50)^2 / ((0.050)^2 x 0.050)[/tex] = 1000

Now we compare the value of Q to the equilibrium constant Kc:

Kc =[tex][NOCl]^2 / ([NO]^2[Cl2])[/tex] = 2000

Since Q < Kc, we can conclude that the reaction has not yet reached equilibrium and that the forward reaction will proceed to reach equilibrium.

When the volume of the container is decreased by one-half, the concentration of all species will increase due to the decrease in volume. According to Le Chatelier's principle, the reaction will shift in the direction that reduces the total number of moles of gas.

In this case, the reaction produces two moles of gas on the left-hand side and two moles of gas on the right-hand side, so the total number of moles of gas does not change. Therefore, the volume change will not have an effect on the equilibrium position.

Learn more about  equilibrium here:

https://brainly.com/question/30807709

v

#SPJ11

The correct answer is: C. Q = 1000, and the reaction will proceed toward reactants.

How to determine the reactions at equilibrium?



To determine which statement is true if the volume of the container is decreased by one-half, we need to calculate the reaction quotient (Q) for the new conditions.

When the volume is decreased by half, the concentrations of all species will double:

NO(g): 0.050 * 2 = 0.100 M
Cl2(g): 0.050 * 2 = 0.100 M
NOCl(g): 0.50 * 2 = 1.00 M

Now, calculate Q using the new concentrations:

Q = [NOCl]^2 / ([NO]^2 * [Cl2])
Q = (1.00)^2 / ((0.100)^2 * (0.100))
Q = 1 / 0.001
Q = 1000

So, Q = 1000. Now, compare Q to Kc:

Q > Kc, meaning the reaction will proceed toward the reactants to reach equilibrium.

To know more about Reaction Quotient:

https://brainly.com/question/24202150

#SPJ11

rade 11 Text Books Exercise 5.4 Answer the following questions: 1. 5.0 mole of ammonia were introduced into a 5.0 L reaction chamber in which it is partially decomposed at high temperatures. CHEMISTRY GRADE 11 267 2NH₂(g) 3H₂(g) + N₂(g) At equilibrium at a particular temperature, 80.0% of the ammonia had reacted. Calculate K for the reaction.​

Answers

At the given temperature, the equilibrium constant K for the reaction is 0.5625 mol/L.

How to determine equilibrium constant?

The balanced chemical equation for the reaction is:

2NH₃(g) ⇌ 3H₂(g) + N₂(g)

The equilibrium expression for the reaction is:

K = [H₂]³[N₂] / [NH₃]²

Given that 5.0 moles of NH₃ were introduced into a 5.0 L reaction chamber, the initial concentration of NH₃ is:

[NH₃]₀ = 5.0 mol / 5.0 L = 1.0 mol/L

At equilibrium, 80.0% of the NH₃ had reacted, which means that 20.0% of NH₃ remains. Therefore, the equilibrium concentration of NH₃ is:

[NH₃] = 0.20 x 1.0 mol/L = 0.2 mol/L

The equilibrium concentrations of H₂ and N₂ can be calculated from the balanced equation:

[H₂] = (3/2) x [NH₃] = 0.3 mol/L

[N₂] = [NH₃] / 2 = 0.1 mol/L

Substituting these values into the equilibrium expression gives:

K = [H₂]³[N₂] / [NH₃]²

K = (0.3 mol/L)³ x (0.1 mol/L) / (0.2 mol/L)²

K = 0.5625 mol/L

Therefore, the equilibrium constant K for the reaction at the given temperature is 0.5625 mol/L.

Find out more on equilibrium constant here: https://brainly.com/question/19340344

#SPJ1

What is the mass of ether(0. 71) which can be put into a beaker holding 130ml

Answers

The mass of ether that can be put into a 130 mL beaker is approximately 92.3 grams.

How to find the mass of the ether

To calculate the mass of ether that can be put into a 130 mL beaker, we need to know the density of ether.

The density of ether varies depending on the specific type of ether, but assuming you are referring to diethyl ether, the density is approximately 0.71 g/mL.

Using the density and the volume of the beaker, we can calculate the maximum mass of ether that can be put into the beaker as follows:

Mass of ether = Density x Volume

Mass of ether = 0.71 g/mL x 130 mL

Mass of ether = 92.3 grams

Therefore, the maximum mass of diethyl ether that can be put into a 130 mL beaker is approximately 92.3 grams.

Learn more about density at

https://brainly.com/question/26364788

#SPJ1

karl-anthony is trying to plate gold onto his silver ring. he constructs an electrolytic cell using his ring as one of the electrodes. he runs this cell for 94.7 minutes at 220.8 ma. how many moles of electrons were transferred in this process?

Answers

0.11 moles of electrons were transferred during the electroplating process.

The number of moles of electrons transferred can be calculated using Faraday's constant, which represents the amount of charge carried by one mole of electrons.

Faraday's constant is approximately 96,485 C/mol. Using this constant and the given information, the number of moles of electrons transferred can be calculated as:

moles of electrons = (220.8 mA * 94.7 min * 60 s/min) / (1000 mA/A * 96,485 C/mol)moles of electrons = 0.11 mol

Therefore, 0.11 moles of electrons were transferred during the electroplating process.

To learn more about Faraday's constant, here

https://brainly.com/question/29290837
#SPJ4

if each orange sphere represents 0.010 mol of sulfate ion, how many moles of acid and of base reacted?

Answers

The number of moles of acid and base that react depends on the stoichiometry of the chemical reaction and the amounts of reactants used

Without additional information about the chemical reaction or system being referred to, we cannot determine the number of moles of acid and base that reacted.

If we assume that the orange spheres represent sulfate ions in a specific reaction, then we would need to know the stoichiometry of the reaction to determine the number of moles of acid and base that reacted.

For example, if the reaction involved sulfuric acid ([tex]H_2SO_4[/tex]) and sodium hydroxide (NaOH) and the orange spheres represent sulfate ions ([tex](SO_4)^{2-[/tex]), then the balanced chemical equation would be:

[tex]H_2SO_4 + 2NaOH - > Na_2SO_4 + 2H_2O[/tex]

In this case, we would need to know the amount of sodium hydroxide used to determine the number of moles of acid and base that reacted. If we know the number of orange spheres representing sulfate ions and the amount of sodium hydroxide used, we can determine the moles of acid and base that reacted.

For such more questions on Stoichiometry:

https://brainly.com/question/30417834

#SPJ11

what happened to the cell potential when you added aqueous ammonia to the half-cell containing 0.001 m cuso4? how does ammonia react with copper ions in aqueous solution? (think back to coordination complexes in exp

Answers

When aqueous ammonia is added to the half-cell containing 0.001 M CuSO4, the cell potential is likely to change. The reason for this is that ammonia can form coordination complexes with copper ions, which can affect the concentration of copper ions in the solution, and hence the concentration gradient that drives the redox reaction in the cell.

Ammonia can react with copper ions in aqueous solution to form a series of coordination complexes. The most common complex is Cu(NH3)42+, which is a tetraamminecopper(II) complex. The formation of this complex reduces the concentration of free Cu2+ ions in solution, which can shift the equilibrium of the redox reaction in the cell.

If the reduction half-reaction is Cu2+ + 2e- → Cu, the addition of ammonia can reduce the concentration of Cu2+ ions in the solution and shift the equilibrium to the left, decreasing the cell potential. On the other hand, if the oxidation half-reaction is Cu → Cu2+ + 2e-, the addition of ammonia can increase the concentration of Cu2+ ions and shift the equilibrium to the right, increasing the cell potential.

Learn more about aqueous ammonia

https://brainly.com/question/14672082

#SPJ4

a 16.60 ml portion of 0.0969 m ba(oh)2 was used to titrate 25.0 ml of a weak monoprotic acid solution to the stoichiometric point. what is the molarity of the acid?

Answers

The molarity of the weak monoprotic acid solution is 0.0644 mol/L.

To find the molarity of the acid, we need to use the balanced chemical equation and the stoichiometry of the reaction between the acid and the base. The equation for the reaction is:

HA(aq) + Ba(OH)2(aq) → BaA2(aq) + 2H2O(l)

where HA is the weak monoprotic acid, Ba(OH)2 is the strong base, BaA2 is the barium salt of the acid, and H2O is water.

At the stoichiometric point, the moles of Ba(OH)2 used will be equal to the moles of acid present in the solution. Using the given volume and molarity of Ba(OH)2, we can calculate the moles of Ba(OH)2 used:

moles of Ba(OH)2 = volume × molarity = 16.60 ml × 0.0969 mol/L = 0.00161 mol

Since the acid is a monoprotic acid, the moles of acid present in the solution will be equal to the moles of Ba(OH)2 used. Therefore:

moles of HA = 0.00161 mol

Using the volume of the acid solution (25.0 ml), we can calculate the molarity of the acid:

molarity of HA = moles of HA / volume of HA solution in L

molarity of HA = 0.00161 mol / 0.0250 L

molarity of HA = 0.0644 mol/L

For such more questions on Molarity:

https://brainly.com/question/14469428

#SPJ11

someone help please its a sience testtt

Answers

The equator of the sun rotates faster than the poles.

How does the rotation of the equator of the sun differ from the rotation of the poles of the sun?

The equator of the sun rotates faster than its poles. This is known as differential rotation, and it is due to the fact that the sun is not a solid body, but is composed of gas and plasma. The equatorial regions of the sun rotate faster because they are farther from the center of the sun, where the gravitational pull is stronger, and thus experience less resistance to their motion.

The period of rotation of the equator of the sun is shorter than that of the poles. The equator rotates once every 25.4 days, while the poles rotate once every 36 days.

Learn more about the sun:https://brainly.com/question/17376727

#SPJ1

Pi bonding occurs in each of the following species EXCEPT...
(A) CO2 (B) C2H4 (C) CN− (D) C6H6 (E) CH4

Answers

CH4 has only sigma bonds between the carbon and hydrogen atoms, and no pi bonds.

The answer is (E) CH4.



Pi bonding refers to the sharing of electrons between two atoms that occurs when two atomic orbitals with parallel electron spins overlap. Pi bonds are formed by the sideways overlap of two p orbitals.

In the given options, all except CH4 have pi bonds:

(A) CO2 has two pi bonds between the carbon atom and the oxygen atoms.
(B) C2H4 has a double bond between the two carbon atoms, which consists of one sigma bond and one pi bond.
(C) CN− has a triple bond between the carbon and nitrogen atoms, consisting of one sigma bond and two pi bonds.
(D) C6H6 has six pi bonds due to the delocalized pi electron system in the benzene ring.

In contrast, CH4 has only sigma bonds between the carbon and hydrogen atoms, and no pi bonds.

Visit to know more about Sigma bonds:-

brainly.com/question/31377841

#SPJ11

which category of amino acid contains r groups that are hydrophobic? which category of amino acid contains r groups that are hydrophobic? polar acidic basic non-polar basic and acidic

Answers

The amino acid that contains the R groups that are hydrophobic are the non - polar.

The Amino acids are the building blocks of the molecules of the  proteins. These contains the one hydrogen atom and the one amine group, the one carboxylic acid group and the one side chain that is the R group will be attached to the central carbon atom.

The side chains of the non polar amino acids includes the long carbon chains or the carbon rings, which makes them bulky. These are the hydrophobic, that means they repel the water. Therefore the non-polar amino acids are the hydrophobic.

To learn more about amino acid here

https://brainly.com/question/12788134

#SPJ4

according to the ismp, which of the following is appropriate? select one: a. 100000 units b. 0.9% sodium chloride c. .9% sodium chloride d. 1.0 mg

Answers

According to the ISMP, the appropriate option is "0.9% sodium chloride" as it is written in the correct format with the percentage symbol and the correct concentration of sodium chloride.

The other options do not relate to the given terms or are not written in the appropriate format. The option "1.0 mg" is written in the correct format but does not relate to sodium chloride or the given scenario.
According to the ISMP (Institute for Safe Medication Practices), the appropriate option among the given choices is:

b. 0.9% sodium chloride

This option is appropriate because it clearly specifies the concentration of the sodium chloride solution, which is essential for accurate and safe medication administration. The other options (a, c, and d) lack context or contain ambiguous information, which could lead to medication errors or incorrect dosing.

Learn more about sodium chloride here:

https://brainly.com/question/29801408

#SPJ11

According to the ISMP, the appropriate term would be "0.9% sodium chloride".

How to represent concentrations according to ISMP?


This is because the ISMP recommends using a leading zero before a decimal point for concentrations and avoiding the use of ambiguous or error-prone abbreviations, such as option C (.9% sodium chloride) which lacks a leading zero. Option A (100000 units) and option D (1.0 mg) are not relevant to the context of the question. Therefore, the correct format is "0.9%" rather than ".9%" or "1.0 mg".

To know more about ISMP:

https://brainly.com/question/31018598

#SPJ11

calculate the volume of a stock solution, in liters and to the thousandths place, that has a concentration of 0.400 m koh and is diluted to 3.00 l of 0.130 m koh

Answers

The volume of the stock solution is approximately 0.975 liters, to the thousandths place.

To calculate the volume of the stock solution, you can use the dilution formula:

C₁V₁ = C₂V₂

where:
C₁ = concentration of the stock solution (0.400 M KOH)
V₁ = volume of the stock solution (unknown, in liters)
C₂ = concentration of the diluted solution (0.130 M KOH)
V₂ = volume of the diluted solution (3.00 L)

Rearrange the formula to solve for V1:

V1 = C₂V₂ / C₁

Now, plug in the given values:

V₁ = (0.130 M KOH * 3.00 L) / 0.400 M KOH

V₁ ≈ 0.975 L
know more about stock solution here

https://brainly.com/question/25256765#

#SPJ11

A vinegar solution of unknown concentration was prepared by diluting 10. 00 mL of vinegar to a total volume of 50. 00 mL with deionized water. A 25. 00-mL sample of the diluted vinegar solution required 20. 24 mL of 0. 1073 M NaOH to reach the equivalence point in the titration. Calculate the concentration of acetic acid, CH3COOH, (in M) in the original vinegar solution (i. E. , before dilution)

Answers

The concentration of acetic acid in the original vinegar solution is 0.0435M.

Balanced chemical equation for the reaction between acetic acid (CH₃COOH) and sodium hydroxide (NaOH) is:

CH₃COOH + NaOH → CH₃COONa + H₂O

The number of moles of NaOH used in the titration will be calculated as;

moles NaOH = Molarity × Volume (in L)

moles NaOH = 0.1073 M × 0.02024 L

moles NaOH = 0.002174872

Therefore, the concentration of CH₃COOH in the diluted vinegar solution is;

C₁V₁ = C₂V₂

C₁ × 10.00 mL = C₂ × 50.00 mL

C₁ = (C₂ × 50.00 mL) ÷ 10.00 mL

C₁ = 5 × C₂

where C₁ is the concentration of CH₃COOH in the diluted vinegar solution, and C₂ is the concentration of CH₃COOH in the original vinegar solution.

The number of moles of CH₃COOH in the diluted vinegar solution is;

moles CH₃COOH = C₁ × V₁ (in L)

moles CH₃COOH = (5 × C₂) × 0.01000 L

moles CH₃COOH = 0.05000 × C₂

The concentration of CH₃COOH in the original vinegar solution can be calculated;

moles CH₃COOH in original vinegar = moles CH₃COOH in diluted vinegar

0.05000 × C₂ = 0.002174872

C₂ = 0.002174872 ÷ 0.05000

C₂ = 0.043

To know more about concentration here

https://brainly.com/question/10725862

#SPJ4

what is a possible set of quantum numbers m, l, ml, ms for the electron configuration of cobalt g

Answers

One possible set of quantum numbers for cobalt's electron configuration is:

m = -2, -1, 0, 1, 2, 1, 0

l = 2

ml = -2, -1, 0, 1, 2, 0, 1

ms = +1/2, -1/2, +1/2, -1/2, +1/2, -1/2, +1/2

The electron configuration of cobalt in its ground state is:

1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^7

To determine the possible set of quantum numbers, we need to first fill the orbitals in the order of increasing energy and the Pauli exclusion principle, Hund's rule, and the aufbau principle.

The last electron enters the 3d subshell, which has five orbitals (dxy, dyz, dxz, dx2-y2, and dz2). The possible quantum numbers for the last electron in the 3d subshell are:

ml can have values from -2 to +2, corresponding to the five d orbitals.

l = 2 since d orbitals have an azimuthal quantum number of 2.

ms can have values of +1/2 or -1/2, corresponding to the electron's spin.

Since there are seven electrons in the 3d subshell, we can have up to seven sets of quantum numbers for the seven electrons. One possible set of quantum numbers for cobalt's electron configuration is:

m = -2, -1, 0, 1, 2, 1, 0

l = 2

ml = -2, -1, 0, 1, 2, 0, 1

ms = +1/2, -1/2, +1/2, -1/2, +1/2, -1/2, +1/2

Note that the last three electrons must have opposite spins (Pauli exclusion principle), and each orbital can have at most two electrons (Hund's rule).

Click the below link, to learn more about Electron Configuration of cobalt:

https://brainly.com/question/19863670

#SPJ11

6. from the lab on solutions, what is the criterion for determining whether or not a solution is a conductor of electricity?

Answers

In the lab on solutions, the criterion for determining whether or not a solution is a conductor of electricity is the presence of free-moving ions within the solution. When a substance dissolves in water and releases ions, it allows the flow of electric current, making it a conductor of electricity.

The criterion for determining whether or not a solution is a conductor of electricity is whether or not it contains ions that are able to move freely and carry an electric charge. A solution that contains ions is considered a conductor of electricity, while a solution that does not contain ions is considered a non-conductor or insulator of electricity.

Learn more about conductors of electricity at https://brainly.com/question/3447552

#SPJ11

The criterion for determining whether or not a solution is a conductor of electricity is whether or not it contains ions that can carry an electric charge.

If the solution contains ions, it can act as a conductor of electricity. If it does not contain ions, it will not conduct electricity.

Use the following criterion:

A solution is considered a conductor of electricity if it contains ions that are free to move. These ions enable the flow of electrical current through the solution. Typically, this occurs when a solution has dissolved salts, acids, or bases, as they dissociate into ions when dissolved in a solvent like water. To test the conductivity of a solution, you can use a simple conductivity meter or a circuit with a light bulb, and observe if the light bulb lights up or if the meter shows any electrical current flow. If it does, the solution is a conductor of electricity.

Learn more about conductor here:

https://brainly.com/question/15320131

#SPJ11

25. j. chadwick discovered the neutron by bombarding with the popular projectile of the day, alpha particles. (a) if one of the reaction products was the then unknown neutron, what was the other product? (b) what is the q-value of this reaction?

Answers

(a) If one of the reaction products was the then unknown neutron, what was the other product is the C -12.

(b) The q-value of this reaction is the 5.9 × 10⁸ J.

The James Chadwick was discovered the neutron during the experiment involving the nuclear reaction in that the beryllium, bombarded with the alpha particles. The equation of the reaction is as :

⁴Be₉  +  ²He₄  ---->  ⁶C₁₂  +  ⁰n₁

(a) If one of the reaction products was the then unknown neutron, what was the other product is the C -12.

(b) The q-value of this reaction is as :

q = mc²

Where,

The m is the mass

The c is the speed of the light.

m = 4.002603 + 2.014102

m = 1.988501

q = 1.988501  × 3 × 10⁸

q = 5.9 × 10⁸ J

To learn more about James Chadwick here

https://brainly.com/question/14559793

#SPJ4

addictive substances, for which demand is inelastic, are products for which producers can pass higher costs on to consumers.

Answers

The statement is correct. Producers of addictive substances, for which demand is inelastic, can pass higher costs on to consumers.

Inelastic demand refers to a situation where changes in price have little effect on the quantity demanded of a product. Addictive substances, such as tobacco or drugs, often have inelastic demand because users are willing to pay high prices for the product regardless of changes in price.

Producers of addictive substances can take advantage of this inelastic demand by increasing prices without seeing a significant decrease in demand. This means that they can pass on any higher costs, such as increased taxes or production costs, to the consumers, who are likely to continue purchasing the product even at a higher price.

This is often seen in the tobacco industry, where governments may increase taxes on cigarettes as a way to discourage smoking, but the tobacco companies can simply pass on the higher costs to consumers who continue to buy the product.

Therefore, it can be concluded that producers of addictive substances, for which demand is inelastic, can pass higher costs on to consumers.

To learn more about addictive substances, here

https://brainly.com/question/15085682

#SPJ4

Find the volume of a sample of wood that has a mass of 95. 1 g and a density of 0. 857 g/mL (How do you do this!)

Answers

The volume of the sample of wood is 110.9 mL.

Volume is the measure of the amount of space which is occupied by an object or the substance. It is usually expressed in units such as liters, milliliters, cubic meters, or cubic centimeters. The volume of a solid can be calculated by measuring its dimensions and using mathematical formulas, while the volume of a liquid can be measured directly using a graduated cylinder or a pipette.

To find the volume of the sample of wood, we can apply the following formula;

Density = Mass/Volume

Rearranging the formula, we get;

Volume = Mass/Density

Substituting the given values, we get:

Volume = 95.1 g / 0.857 g/mL

Volume = 110.9 mL

To know more about volume here

https://brainly.com/question/1578538

#SPJ4

a 35.0-ml sample of 0.20 m lioh is titrated with 0.25 m hcl. what is the ph of the solution after 23.0 ml of hcl have been added to the base? group of answer choices 1.26 12.74 12.33 13.03 1.67

Answers

The pH of the solution after 23.0 mL of 0.25 M HCl have been added to the 35.0 mL of 0.20 M LiOH is 12.74.


1. Calculate the initial moles of LiOH and HCl:
  LiOH: 35.0 mL * 0.20 mol/L = 7.00 mmol
  HCl: 23.0 mL * 0.25 mol/L = 5.75 mmol

2. Determine the limiting reactant and find the moles of unreacted LiOH:
  Since HCl is the limiting reactant, subtract its moles from LiOH moles:
  7.00 mmol - 5.75 mmol = 1.25 mmol of unreacted LiOH

3. Calculate the new concentration of LiOH in the solution:
  Total volume: 35.0 mL + 23.0 mL = 58.0 mL
  New concentration: 1.25 mmol / 58.0 mL = 0.02155 mol/L

4. Calculate the pOH of the solution:
  pOH = -log10(0.02155) = 1.66

5. Find the pH of the solution:
  pH = 14 - pOH = 14 - 1.66 = 12.74

To know more about pH click on below link:

https://brainly.com/question/491373#

#SPJ11

4. if 1 drop of acid is equal to 50 microliter. calculate the concentration of h ion and the ph of the solution when 1 drop of 0.25 m hcl is added to 3 ml water. does that conform to your observation in part d. if not, why?

Answers

We are given that 1 drop of 0.25 M HCl is added to 3 mL of water, and we need to find the concentration of H+ ions and the pH of the solution is  2.39

First, let's determine the volume of the HCl solution in the mixture. Since 1 drop of acid is equal to 50 microliters, we have 50 microliters = 0.05 mL

Now, let's find the total volume of the mixture (HCl + water):
0.05 mL (HCl) + 3 mL (water) = 3.05 mL

Next, we need to calculate the moles of H+ ions from the HCl solution. We know that the concentration of the HCl solution is 0.25 M, so:
moles of H+ = (0.25 mol/L) × (0.05 L/1000) = 0.0000125 mol

To find the concentration of H+ ions in the mixture, we divide the moles of H+ by the total volume of the mixture:
[H+] = (0.0000125 mol) / (3.05 L/1000) = 0.004098 mol/L

Now we can calculate the pH of the solution using the formula:
pH = -log10[H+]
pH = -log10(0.004098) ≈ 2.39

The pH of the solution is approximately 2.39 after adding 1 drop of 0.25 M HCl to 3 mL of water.

The Question was Incomplete, Find the full content below :

Please show explanation: If 1 drop of acid is equal to 50 microliter. Calculate the concentration of H+ ion and the pH of the solution when 1 drop of 0.25 M HCl is added to 3 mL water?

Know more about  concentration here:

https://brainly.com/question/17206790

#SPJ11  

How many moles of h2 can be produced from x grams of mg in magnesium-aluminum alloy? the molar mass of mg is 24. 31 g/mol?

Answers

The number of moles of H₂ that can be produced from x grams of Mg is (x / 24.31)

The balanced chemical equation for the reaction between Mg and HCl is,

Mg + 2HCl → MgCl₂ + H₂

This equation shows that 1 mole of Mg reacts with 2 moles of HCl to produce 1 mole of H₂. Therefore, the number of moles of H₂ that can be produced from x grams of Mg can be calculated as follows:

Calculate the number of moles of Mg in x grams:

Number of moles of Mg = mass of Mg / molar mass of Mg

Number of moles of Mg = x / 24.31

Use the mole ratio between Mg and H₂ to calculate the number of moles of H₂ produced:

Number of moles of H₂ = Number of moles of Mg × (1 mole of H₂ / 1 mole of Mg)

Number of moles of H₂ = (x / 24.31) × (1/1)

To know more about moles, here

brainly.com/question/26416088

#SPJ4

which of the following is true about the absorption and metabolism of alcohol? alcohol is metabolized by most tissue and organs in the body. the majority of alcohol is absorbed in the stomach. men and women do not metabolize alcohol at significantly different rates. acetaldehyde produced during alcohol metabolism is highly toxic.

Answers

The statement "acetaldehyde produced during alcohol metabolism is highly toxic" is true about absorption and metabolism of alcohol. Option 4 is correct.

Acetaldehyde is a byproduct of alcohol metabolism, and it is a toxic substance that can cause various symptoms such as facial flushing, nausea, and headache. Acetaldehyde is rapidly converted to acetate by the enzyme aldehyde dehydrogenase, which is then metabolized further to carbon dioxide and water.

However, if alcohol is consumed at a high rate, the liver may not be able to metabolize all of the acetaldehyde, leading to a buildup of this toxic substance in the body. This can result in more severe symptoms such as vomiting, rapid heartbeat, and difficulty breathing. Therefore, it is important to consume alcohol in moderation and allow enough time for the liver to metabolize the alcohol and its byproducts. Hence Option 4 is correct.

To learn more about absorption and metabolism of alcohol, here

https://brainly.com/question/14310421

#SPJ4

a 17% by mass h2so4(aq) solution has a density of 1.07 g/cm3 . how much solution contains 8.37 g of h2so4?

Answers

46.01 mL of the 17% H2SO4 solution contains 8.37 g of H2SO4, calculated using mass percent, density, and volume.

To decide the volume of a 17% by mass H2SO4 arrangement that contains 8.37 g of H2SO4, we want to utilize the thickness and the mass percent of the arrangement.

The mass percent of an answer is the mass of the solute separated by the mass of the arrangement, increased by 100. The thickness of an answer is the mass of the arrangement separated by its volume. Utilizing these connections, we can set up the accompanying conditions:

mass percent = (mass of solute/mass of arrangement) x 100

thickness = mass of arrangement/volume of arrangement

We can modify the principal condition to settle for the mass of arrangement:

mass of arrangement = mass of solute/(mass percent/100)

Subbing the given qualities, we get:

mass of arrangement = 8.37 g/(17/100) = 49.23 g

Then, we can utilize the thickness to track down the volume of the arrangement:

thickness = mass of arrangement/volume of arrangement

volume of arrangement = mass of arrangement/thickness = 49.23 g/1.07 g/cm3 ≈ 46.01 mL

Thusly, 46.01 mL of the 17% by mass H2SO4 arrangement contains 8.37 g of H2SO4.

To learn more about  moles of H2SO4 are contained in solution, refer:

https://brainly.com/question/29383656

#SPJ4

The complete question is:

A 17% by mass H2SO4 (aq) solution has a density of 1.07 g/mL. How many milliliters of solution contain 8.37 g of H2SO4? What is the molality of H2SO4 in solution? What mass (in grams) of H2SO4 is in 250 mL of solution?

which method would you use to perform these reactions, grignard carboxylation or nitrile hydrolysis?

Answers

Choose the method based on your starting material: Grignard carboxylation for alkyl halide and Nitrile hydrolysis for nitriles

If the desired reactions involve the conversion of a nitrile functional group to a carboxylic acid, then the method that should be used is nitrile hydrolysis. Grignard carboxylation is a different chemical process that involves the addition of a Grignard reagent to a carbonyl group to form a carboxylic acid. Therefore, nitrile hydrolysis would be the appropriate method for the conversion of a nitrile to a carboxylic acid.
Hi! To determine the appropriate method for your reactions, let's briefly discuss each one:

1. Grignard carboxylation: This reaction involves the use of a Grignard reagent (an organomagnesium compound, typically R-MgX) reacting with carbon dioxide (CO2) to produce a carboxylic acid. It's a useful method for preparing carboxylic acids from alkyl halides.

2. Nitrile hydrolysis: This reaction involves the conversion of a nitrile (RC≡N) to a carboxylic acid (RCOOH) by reacting with water in the presence of an acid or a base as a catalyst. This method is suitable for preparing carboxylic acids from nitriles.

If your starting material is a nitrile, the appropriate method to perform the reaction would be nitrile hydrolysis. If your starting material is an alkyl halide, you would use the Grignard carboxylation method.

In summary, choose the method based on your starting material:
- Grignard carboxylation for alkyl halides
- Nitrile hydrolysis for nitriles

Learn more about Grignard carboxylation here:

https://brainly.com/question/9322175

#SPJ11

The process chosen is determined on the starting material and the intended product. Grignard carboxylation is a better procedure if the starting material is an alkyl or aryl halide and the target product is a carboxylic acid. If the starting material is a nitrile and the desired product is a carboxylic acid, nitrile hydrolysis is the procedure to use.

Grignard carboxylation is a useful method for the synthesis of carboxylic acids from alkyl and aryl halides. In this reaction, a Grignard reagent (an organomagnesium compound) is first prepared by reacting an alkyl or aryl halide with magnesium metal.

The resulting Grignard reagent is then reacted with carbon dioxide to form a carboxylate intermediate, which is subsequently hydrolyzed with an acid to produce the carboxylic acid.

Nitrile hydrolysis, on the other hand, is a process that involves the conversion of a nitrile functional group (-CN) to a carboxylic acid functional group (-COOH).

In this reaction, the nitrile is typically reacted with an acid or base in the presence of water to produce an amide intermediate, which is then further hydrolyzed to form the carboxylic acid.

For more question on Grignard carboxylation click on

https://brainly.com/question/9322175

#SPJ11

consider the following polymer (pva) and potential-cross linking agent (boric acid). what type of intermolecular forces is likely to sustain cross-linking of polymeric chains in this system?

Answers

The cross-linking of PVA and boric acid is sustained by a combination of covalent and non-covalent interactions, including hydrogen bonding and van der Waals forces. These interactions lead to the formation of a stable, three-dimensional network structure that has a range of potential applications, including in the development of new materials with unique properties.


Polyvinyl alcohol (PVA) can form cross-linked networks when reacted with boric acid. The cross-linking is due to the formation of borate ester linkages between PVA chains and boric acid molecules. The formation of these linkages is facilitated by a combination of covalent and non-covalent interactions, including hydrogen bonding and van der Waals forces.

Hydrogen bonding is a particularly important intermolecular force that plays a key role in the formation and stability of the cross-linked PVA network. PVA contains hydroxyl (-OH) groups along its polymer chains that can form strong hydrogen bonds with the borate groups on boric acid molecules. This interaction leads to the formation of a three-dimensional network structure that is stabilized by the formation of multiple hydrogen bonds between adjacent PVA chains and boric acid molecules.

Van der Waals forces also contribute to the stability of the cross-linked network. These forces arise from the fluctuating dipoles in atoms and molecules and are responsible for the attraction between non-polar species. In the PVA-boric acid system, van der Waals forces between the polymer chains and boric acid molecules help to stabilize the cross-linked network.

For such more questions on Cross-linking of PVA:

https://brainly.com/question/13247684

#SPJ11

phenacetin can be prepared from p-acetamidophenol, which has a molar mass of 151.16 g/mol, and bromoethane, which has a molar mass of 108.97 g/mol. the density of bromoethane is 1.47 g/ml. what is the yield in grams of phenacetin, which has a molar mass of 179.22 g/mol, possible when reacting 0.151 g of p-acetamidophenol with 0.12 ml of bromoethane?

Answers

The theoretical yield of phenacetin is 0.17922 g. However, the actual yield may be lower due to factors such as incomplete reaction, loss during purification, or experimental error.

To calculate the theoretical yield of phenacetin, we need to first determine the limiting reagent. The limiting reagent is the reactant that will be completely consumed in the reaction, thus limiting the amount of product that can be produced.

First, we need to convert the volume of bromoethane given in milliliters to grams, using its density:

0.12 ml x 1.47 g/ml = 0.1764 g bromoethane

Next, we can use the molar masses of p-acetamidophenol and bromoethane to determine the number of moles of each:

moles p-acetamidophenol = 0.151 g / 151.16 g/mol = 0.001 mol

moles bromoethane = 0.1764 g / 108.97 g/mol = 0.00162 mol

Since the reaction requires a 1:1 molar ratio of p-acetamidophenol to bromoethane, and the number of moles of p-acetamidophenol is smaller than the number of moles of bromoethane, p-acetamidophenol is the limiting reagent.

The theoretical yield of phenacetin can be calculated using the molar mass of phenacetin and the number of moles of p-acetamidophenol:

moles phenacetin = 0.001 mol p-acetamidophenol

mass phenacetin = 0.001 mol x 179.22 g/mol = 0.17922 g

For such more questions on Phenacetin:

https://brainly.com/question/29460577

#SPJ11

which of the following statements about nonmetal anions are true? select all that apply. select all that apply: nonmetals tend to form anions by gaining electrons to form a noble gas configuration. nonmetals do not tend to form anions. anions of nonmetals tend to be isoelectronic with a noble gas. nonmetals tend to form anions by losing electrons to form a noble gas configuration.

Answers

The correct statements are:
1. Nonmetals tend to form anions by gaining electrons to form a noble gas configuration.
2. Anions of nonmetals tend to be isoelectronic with a noble gas.

Nonmetals do not tend to form anions and nonmetals tend to form anions by losing electrons to form a noble gas configuration are not true statements. Nonmetals do tend to form anions by gaining electrons to achieve a stable, noble gas configuration. Anions of nonmetals often have the same number of electrons as a noble gas, making them isoelectronic with that noble gas. Nonmetals do not tend to form anions by losing electrons, as they typically have a higher electronegativity and therefore attract electrons towards themselves rather than giving them up.

Therefore, the correct answer would be the first and third statements.

Learn more about noble gas configuration at https://brainly.com/question/28585122

#SPJ11

Nonmetals tend to form anions by gaining electrons to form a noble gas configuration.

Anions of nonmetals tend to be isoelectronic with a noble gas.

Nonmetals have a tendency to gain electrons in order to form anions, since this allows them to achieve a noble gas electron configuration. This is particularly true for nonmetals located on the right-hand side of the periodic table, such as the halogens. In contrast, metals tend to lose electrons to form cations.

Anions of nonmetals typically have the same number of electrons as a noble gas atom with the next higher atomic number. This means that they are isoelectronic with the noble gas, and have a stable electronic configuration. For example, the chloride ion (Cl-) is isoelectronic with argon.

It is not true that nonmetals do not tend to form anions by losing electrons, as this would result in a cationic species.

Learn more about isoelectronic  here:

https://brainly.com/question/6807313

#SPJ11

the gain or loss of electrons from an atom results in the formation of a (an)

Answers

The formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Atoms are composed of protons, neutrons, and electrons. The number of protons in an atom determines its atomic number and the element it represents. The electrons in an atom occupy different energy levels or shells, and these electrons participate in chemical reactions. The outermost shell of electrons, called the valence shell, is particularly important in chemical reactions because it determines the chemical properties of the atom.

When an atom gains or loses electrons, it becomes charged and is called an ion. The process of gaining or losing electrons is called ionization. When an atom loses one or more electrons, it becomes a positively charged ion called a cation. Cations have a smaller number of electrons than protons and have a net positive charge. For example, when the element sodium (Na) loses one electron, it becomes a sodium ion (Na+).

On the other hand, when an atom gains one or more electrons, it becomes a negatively charged ion called an anion. Anions have a larger number of electrons than protons and have a net negative charge. For example, when the element chlorine (Cl) gains one electron, it becomes a chloride ion (Cl-).

The formation of ions is a fundamental process in many chemical reactions. Ions can combine with each other to form ionic compounds, which are compounds composed of ions held together by electrostatic forces. For example, sodium ions (Na+) and chloride ions (Cl-) can combine to form sodium chloride (NaCl), which is common table salt.

Overall, the formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Visit to know more about Compound:-

brainly.com/question/26487468

#SPJ11

Other Questions
Read "Explosion of the S.S. Challenger" Pg. 4291. What is Reagan's claim about the future of the space program 72. What premise about the space program does Reagan express in lines 22- 26? How does this premise relate to his claim?3. Analyze What specific groups of people does Reagan directly address in his speech? How do the assurances he makes to them impact his message?4. What values does President Reagan suggest all Americans share in his appeals to their sense of patriotism?5. According to Reagan, how are the Challenger astronauts similar to Sir Francis Drake? Is this a valid comparison? Explain why or why not.6. Identify two purposes of Reagan's speech. How do the style and content of the speech contribute to his purposes?7. Is Reagan's statement that tragedies like the Challenger explosion are "all part of the process of exploration and discovery" valid? What types of evidence does Reagan provide to support this idea? What types of evidence does he not address?8. John G. Magee, Jr., died a few months after writing the poem "High Flight," which expresses his feelings about being a World War II pilot. Is Reagan's quote from the poem an effective way to end his speech? Explain your response ______ cases are criminal cases in which the defendant faces execution if convicted. a. Capital b. Corporal c. Civil d. Extrajudicial. An investor has two bonds in her portfolio, Bond C and Bond Z. Each bond matures in 4 years, has a face value of $1,000, and has a yield to maturity of 8.2%. Bond C pays a 11.5% annual coupon, while Bond Z is a zero coupon bond.a.Assuming that the yield to maturity of each bond remains at 8.2% over the next 4 years, calculate the price of the bonds at each of the following years to maturity. Round your answer to the nearest cent.Years to Maturity Price of Bond C Price of Bond Z4 $ $3 $ $2 $ $1 $ $0 $ $ your patient has begun to show symptoms of viral infection during the past hour. which test would be the most sensitive for an answer regarding their infectious status? g You are deciding between two cars with different engines and want the biggerof the two. One engine displaces 350 cubic inches. The other displaces 5,500cubic centimeters. Check all of the reasonable approaches to solving thisquestion. The table shows the weekly income of 20 randomly selected full-time students. If the student did not work, a zero was entered (a) Check the data set for outliers (b) Draw a histogram of the data (c) Provide an explanation for any outliers What are the amplitude, period, and phase shift of the given function ft=-1/2(4t-2pi) Determine if the following are true business requirements or solutions.New Product RequirementsSales must enlist the aid of a Customer Systems Engineer at time of order 100% of the timeSales must complete the product checklist dailyAll orders must be processed within 24 hoursOne password and ID must assigned within 48 hours to the end userA template must be created daily at the time of the order by the sales rep. the city that replaced baghad as the greatest muslim city and the focus of trade was a. damascus. b. jerusalem. c. cairo. d. alexandria. e. medina. Initiative vs. GuiltHow does the event you chose allow someone to overcome this conflict?Your parents want you to become friends with other children in the neighborhood. according to john kotter, leadership a. produces useful change in organizations. b. controls organizational and environmental complexity. c. both agitates for change and advocates stability. d. cannot be distinguished from management. Choose is the following are either; likely, unlikely, impossible, certain, or as likely as not:A. choosing the letter M from a bag that contains magnets for each letter in the alphabet.B. choosing a consonant from a bag that contains magnets for each letter in the alphabet.C. Drawing a red card from a deck of cards. ( I'm guessing the cards are number cards) D. drawing a number between 2 and 20 from a deck of cards.E. drawing the number 1 from a deck of cards In spain and latin america, in civic parades, children, young people and adults dress in the typical clothes of the different regions of their country and dance to traditional music. The event is called ___ please I only have an hour left so can you help me with both? Use two methods including formula and various Excel functions to solve the following problem:Calculate the duration for a $1000, 4-year bond with a 6% annual coupon, currently selling at par. Use the duration to estimate the percentage change in the bonds price for a decrease in the market interest rate to 4%. Use the bond price volatility equation to compute the bond price volatility. Compare the result with the estimated percentage change in the bond price. geographic distribution explains the commuting patterns between cities and suburbs. group of answer choices true false Carla looks from a height of 1515 yards at the top of her apartment building. She lines up the top of a flagpole with the curb of a street 2020 yards away. If the flagpole is 1212 yards from the apartment building, how tall is the flagpole? Find the value of the indicated trigonometry ratio cos in right tringle with side of 6,6*squort 2, 6*squort 3 2 NO(g)+Cl2(g)2 NOCl(g) Kc=2000A mixture of NO(g) and Cl2(g) is placed in a previously evacuated container and allowed to reach equilibrium according to the chemical equation shown above When the system reaches equilibrium, the reactants and products have the concentrations listed in the following table:SpeciesConcentration (M)NO(g)0.050C12(g)0.050NOCl(g)0.50Which of the following is true if the volume of the container is decreased by one-half?A. Q = 100, and the reaction will proceed toward reactants.B. Q = 100, and the reaction will proceed toward products.C. Q = 1000, and the reaction will proceed toward reactants.D. Q = 1000, and the reaction will proceed toward products. if hydrogen is the most common element in the universe, why do we not see the lines of hydrogen in the spectra of the hottest stars?