We separate porridge from cooked rice using a strainer or a sieve.
Porridge and cooked rice are both similar in texture and appearance, making it difficult to separate them. One way to do it is to use a strainer or a colander with small holes. Pour the mixture of porridge and rice into the strainer or colander and let the liquid portion drain out. You can also use a cheesecloth or a muslin cloth to squeeze out the liquid while retaining the rice grains.
Another method is to use a spoon to scoop out the rice from the top, leaving the porridge at the bottom. However, this method may not be as effective as the others. Regardless of the method you choose, it is important to be gentle and patient to avoid breaking the rice grains and mixing them with the porridge.
To know more about porridge, here
https://brainly.com/question/30859396
#SPJ4
the decrease in the second ionization energy of alkali metals going down the group, as shown in the table above, can be best attributed to a decrease in the coulombic force of attraction due to
The decrease in the second ionization energy of alkali metals going down the group is due to the increase in atomic radius.
As the atomic radius increases, the distance between the nucleus and the outermost electron increases, which reduces the coulombic force of attraction between the nucleus and the electron.
This reduced coulombic force of attraction reduces the energy required to remove the electron, thus resulting in a decrease in the ionization energy. Additionally, due to the increased number of electrons, the effective nuclear charge decreases, which further reduces the force of attraction between the nucleus and the electron, thus resulting in a further decrease in the ionization energy.
Therefore, the decrease in the second ionization energy of alkali metals going down the group can be attributed to a decrease in the coulombic force of attraction due to the increase in atomic radius and the decrease in the effective nuclear charge.
know more about Alkali metals here
https://brainly.com/question/5063184#
#SPJ11
what is molarity? match the items in the left column to the appropriate blanks in the sentences on the right.
Molarity (M) is a unit of concentration that expresses the amount of solute dissolved in a solution. It is defined as the number of moles of solute present per liter of solution (mol/L).
Molarity is commonly used in chemistry to express the concentration of a solute in a solution and is typically represented as moles of solute per liter of solution (mol/L or mol L^-1). Molarity is used to describe the concentration of a solution and is important in various calculations involving chemical reactions and solutions.
To calculate molarity, follow these steps:
1. Determine the number of moles of solute in the solution.
2. Measure the volume of the solution in liters.
3. Divide the moles of solute by the volume of the solution in liters.
Molarity = moles of solute/liters of solution
To know more about Molarity:
https://brainly.com/question/22997914
#SPJ11
Molarity is a unit of concentration in chemistry. It is defined as the number of moles of solute per liter of solution. In other words, it measures the amount of substance (in moles) dissolved in a given volume of solution (in liters). the left column contains "molarity," "moles," and "liters," and the sentences.
To match the items in the left column to the appropriate blanks in the sentences on the right, we can use the following:
- Molarity: a unit of concentration in chemistry
- Number of moles: the amount of substance dissolved in a solution
- Liter of solution: the volume in which the substance is dissolved
- Solvent: the substance in which the solute is dissolved
- Solute: the substance that is dissolved in a solvent to make a solution
So the sentences could be:
- Molarity is a unit of concentration in chemistry that measures the amount of substance (in moles) dissolved in a given volume of solution (in liters).
- The number of moles of solute per liter of solution is known as molarity.
- A liter of solution is the volume in which the solute is dissolved to make a solution with a certain molarity.
- A solvent is a substance in which a solute is dissolved to make a solution of a certain molarity.
- A solute is a substance that is dissolved in a solvent to make a solution of a certain molarity.
Hello! Molarity is a measure of the concentration of a solute in a solution, expressed as moles of solute per liter of solution. To match items in the left column to the appropriate blanks in the sentences on the right, follow these steps:
learn more about molarity
https://brainly.com/question/17138838
#SPJ11
Why is cerium sulfate (Ce2(SO4)3) the only compound that experiences a dip in solubility as temperature increases?
Answer: Because its dissolution is exothermic
Explanation:
what will be the molarity of a naoh solution made by diluting 20.0 ml of 1.50 m to a final volume of 50.0 ml.
Explanation:
Moles in the 20 ml
.020 L * 1.5 moles/L = .03 moles
now in 50 ml (which is .05 liters )
.03 moles / .05 L = .6 m
what is the effect on the concentration of ammonia, hydroxide ion, and ammonium ion when the following are added to a basic buffer solution of equal concentrations of ammonia and ammonium nitrate:
Changes in the chemical environment of a basic buffer solution can cause shifts in the equilibrium between ammonia, hydroxide ion, and ammonium ion, leading to changes in their respective concentrations.
When a basic buffer solution of equal concentrations of ammonia and ammonium nitrate is subjected to changes in its chemical environment, the concentrations of ammonia, hydroxide ion, and ammonium ion will be affected as follows:
1) Addition of an acid: The acid reacts with the hydroxide ion present in the buffer solution to form water. This decreases the concentration of hydroxide ion and shifts the equilibrium towards the formation of more ammonia and ammonium ion, thus increasing their concentrations.
2)Addition of a base: The base reacts with the ammonium ion present in the buffer solution to form ammonia and water. This decreases the concentration of ammonium ion and shifts the equilibrium towards the formation of more hydroxide ion, thus increasing its concentration.
3)Dilution: Diluting the buffer solution with water decreases the concentrations of both ammonia and ammonium ion, but does not affect the concentration of hydroxide ion.
4)Addition of ammonium chloride: The ammonium chloride dissociates into ammonium ion and chloride ion in the buffer solution. The increase in ammonium ion concentration causes the equilibrium to shift towards the formation of more ammonia and hydroxide ion, thus increasing their concentrations.
For such more questions on Ammonium nitrate:
https://brainly.com/question/28760836
#SPJ11
as lactic acid accumulates, which compensatory mechanism is initially triggered to maintain acid-base balance?
When lactic acid accumulates, the compensatory mechanism initially triggered to maintain acid-base balance is the respiratory system. It increases the rate and depth of breathing to eliminate more carbon dioxide, which helps reduce acidity and restore pH balance in the body.
As lactic acid accumulates, the compensatory mechanism that is initially triggered to maintain acid-base balance is increased ventilation or hyperventilation. This is because the increased ventilation leads to a decrease in carbon dioxide (CO2) levels in the blood, which helps to offset the acidic effects of lactic acid accumulation. This is a temporary compensatory mechanism, however, as the body will eventually need to eliminate the excess lactic acid through other means such as metabolism and excretion.
Learn more about lactic acid here: brainly.com/question/24976306
#SPJ11
if he gas has an average kinetic energy of 6430 j/mol under certain conditions, what is the root mean square speed of f2 gas molecules under the same conditions?
The root mean square speed of F2 Gas molecules under the same conditions is approximately 582.19 m/s
Given: Average kinetic energy (E_k) = 6430 J/mol
Molar mass of F2 = 2 * Molar mass of F = 2 * 19 g/mol = 38 g/mol (since F has a molar mass of 19 g/mol)
First, let's convert the molar mass of F2 from grams to kilograms:
Molar mass of F2 = 38 g/mol * (1 kg/1000 g) = 0.038 kg/mol
Now, we can use the equation for the average kinetic energy to determine the root mean square speed (v_rms):
E_k = (3/2) * R * T = (1/2) * m * v_[tex]rms^{2}[/tex]
Where R is the universal gas constant (8.314 J/mol K) and T is the temperature in Kelvin.
Since we want to find v_rms, we can rearrange the equation as follows:
v_[tex]rms^{2}[/tex] = (2 * E_k) / m
Plugging in the given values:
v_[tex]rms^{2}[/tex] = (2 * 6430 J/mol) / 0.038 kg/mol = 338947.37[tex]m^{2}/ s^{2}[/tex]
Finally, we take the square root to find the root mean square speed: a
v_rms = √338947.37[tex]rms^{2}[/tex] = 582.19 m/s
So, the root mean square speed of F2 gas molecules under the same conditions is approximately 582.19 m/s.
For More Such Questions on Gas
https://brainly.com/question/24719118
#SPJ11
a solution containing 20.0 g of an unknown non-electrolyte liquid and 110.0 g water has a freezing point of -1.32 °c. given kf = 1.86°c/m for water, the molar mass of the unknown liquid is ____g/mol.
The molar mass of the unknown non-electrolyte liquid is given as
256 g/mol, option A.
The ratio between the mass and the amount of substance (measured in moles) of any sample of a chemical compound is known as the molar mass (M) in chemistry. The molar mass of a material is a bulk attribute rather than a molecular one.
ΔTemp.f = i x Kf x b
where,
ΔTemp.f = the freezing-point depression;
i = the Van't Hoff factor
Kf = the cryoscopic constant of the solvent;
b = the molality of the solution.
Solving for the molality, b = ΔTemp.f/( i * Kf)= 1.32/(1*1.86)
= 0.71 mol/kg
Converting from mol/kg to mol/g,0.71 mol/kg * 1kg/1000g
= 0.00071 mol/g.
Mass of solvent = 110gNumber of moles = mass * molality
= 0.00071 * 110
= 0.078 mol.
To calculate molar mass,Molar mass (g/mol) = mass/number of moles
Mass of solute (liquid) = 20g
Molar mass = 20/0.078
= 256.2 g/mol. ≈ 256 g/mol
Therefore, molar mass of the unknown liquid is 256.2 g/mol.
Learn more about Molar mass:
https://brainly.com/question/837939
#SPJ4
Complete question:
A solution containing 20.0 g of an unknown non-electrolyte liquid and 110.0 g water has a freezing point of -1.32 °c. given kf = 1.86°c/m for water, the molar mass of the unknown liquid is ____g/mol.
A)256B) 69.0 C) 619 D) 78.1
The molar mass of the unknown liquid is 256.5 g/mol.To solve this problem, we can use the formula for calculating the freezing point depression: ΔTf = Kf·m·i
where ΔTf is the change in freezing point (in °C), Kf is the freezing point depression constant (in °C/m), m is the molality of the solution (in mol/kg), and i is the van't Hoff factor (which is 1 for non-electrolytes).
First, we need to calculate the molality of the solution:
molality = moles of solute / mass of solvent (in kg)
We know that the mass of the solvent (water) is 110.0 g, which is 0.1100 kg. To find the moles of solute (the unknown liquid), we need to divide its mass (20.0 g) by its molar mass (which we don't know yet). Let's call the molar mass "M":
moles of solute = 20.0 g / M
So, the molality is:
molality = (20.0 g / M) / 0.1100 kg
molality = (20.0 / M) / 0.1100 mol/kg
Now, we can plug this into the formula for freezing point depression:
ΔTf = Kf·m·i
-1.32 = 1.86·[(20.0 / M) / 0.1100]·1
Simplifying this equation, we get:
-1.32 = 1.86·(181.8 / M)
-1.32 = 338.628 / M
M = 338.628 / 1.32
M = 256.5 g/mol
Therefore, the molar mass of the unknown liquid is 256.5 g/mol.
Learn more about freezing point here: brainly.com/question/3121416
#SPJ11
Name an ester that can be synthesized from propanol and methanoic acid?
Answer:
Propyl methanoate
Explanation:
The ester that can be synthesized from propanol and methanoic acid is propyl methanoate (also known as methyl propanoate or propyl formate). The reaction between propanol and methanoic acid, which is a carboxylic acid, is a classic example of an esterification reaction, which results in the formation of an ester and water.
What advice would you give to the company that wants to build a bridge in South America? Make sure to include whether there is anything the company should change about its design and materials. Give specific examples. Your answer should include at least five complete sentences.
When building a bridge in South America, it is important to consider the climate and terrain of the region. The company should research the area and use the most appropriate materials for the task.
What is materials?Materials are substances or resources that are used to create or make something else. Examples of materials include plastics, metals, fabrics, and paper. Materials are used in the manufacturing of products, such as food, clothing, furniture, and electronics. Materials can also be found in nature, including wood, stone, and minerals. They are also used in the construction of buildings, bridges, and other structures.
For example, they should use steel or reinforced concrete to build the bridge, as these materials are highly durable in wet, humid climates. Additionally, they should make sure to use corrosion-resistant fasteners and coatings to prevent rusting. The company should also consider the seismic activity in the region when designing the bridge, as earthquakes can cause significant structural damage. They should make sure to use seismic-resistant designs and materials, such as flexible joints, to help reduce the risk of damage. Lastly, the company should include guardrails and other safety features on the bridge, as it will be traversed by both pedestrians and vehicles.
To learn more about materials
https://brainly.com/question/16185625
#SPJ1
What is the concentration (in molality) of an aqueous solution of NaCl made by adding
4.56 g of NaCl to enough water to give 20.0 mL of solution. Assume the density of the
solution is 1.03 g/mL
Answer:
data given
mass of NaCl 4.56
dissolved volume 20ml(0.02l)
density of solution 1.03g/ml
Required molality
Explanation:
molarity=m/mr×v
where
m is mass
mr molar mass
v is volume
now,
molarity=4.56/58.5×0.02
molarity =3.9
: .molarity is 3.9mol/dm^3
According to molal concentration, the concentration (in molality) of an aqueous solution of NaCl is 0.0047 mole/kg.
What is molal concentration?Molal concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molal concentration is moles/kg.
The molal concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molal concentration is calculated by the formula, molal concentration=mass/ molar mass ×1/mass of solvent in kg.
In terms of moles, it's formula is given as molal concentration= number of moles /mass of solvent in kg.
Substitution in formula gives the answer but first mass of solution is determined which is density×volume= 1.03×20=20.6 g , mass of solvent= 20.6-4.56=16.05, thus molal concentration=4.56/58.5×1/16.05=0.0047 moles/kg.
Learn more about molal concentration,here:
https://brainly.com/question/4580605
#SPJ2
If 120 cm3 of oxygen gas is collected at 27 oC and 713.3 mm Hg pressure, what will the volume (in cm3) of the dry gas be at STP?
If 120 cm³ of oxygen gas is collected at 713.3 mm Hg pressure, the volume of the dry gas at STP is 0.102 cm³.
How do you calculate the volume of the dry gas to be at STP?To solve this problem, we will use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas:
PV = nRT
First, we need to convert the given conditions to the correct units. The temperature is already in Celsius, so we need to convert it to kelvins by adding 273.15:
T = 27 + 273.15 = 300.15 K
The pressure is given in millimeters of mercury (mm Hg), so we need to convert it to atmospheres (atm) to use in the ideal gas law. There are 760 mm Hg in 1 atm, so:
P = 713.3 mm Hg / 760 mm Hg/atm = 0.938 atm
Next, we can use the ideal gas law to find the number of moles of oxygen gas:
n = PV/RT = (0.938 atm)(120 cm³)/(0.08206 L·atm/(mol·K))(300.15 K) = 0.00454 mol
Finally, we can use the molar volume of a gas at STP (standard temperature and pressure) to find the volume of the dry gas at STP. At STP, the temperature is 273.15 K and the pressure is 1 atm. The molar volume of a gas at STP is 22.4 L/mol, so:
V = n(22.4 L/mol) = (0.00454 mol)(22.4 L/mol) = 0.102 cm³
Therefore, the volume of the dry gas at STP is 0.102 cm³.
Learn more about ideal gas law here:
https://brainly.com/question/28257995
#SPJ1
Calculate the {H+} for a solution with a pH of 11. 55
The {H⁺} of the solution is 2.238 × 10^(-12) M.
pH is a measure of the acidity or basicity of an aqueous solution. It is defined as the negative logarithm (base 10) of the concentration of hydrogen ions ([H+]) in moles per liter. The pH scale ranges from 0 to 14, where a pH of 7 is neutral. Solutions with a pH less than 7 are acidic, while solutions with a pH greater than 7 are basic (also called alkaline).
The pH of a solution is defined as:
pH = -log[H⁺]
Rearranging the equation, we get:
[H⁺] = 10^(-pH)
Substituting the given value of pH, we get:
[H⁺] = 10^(-11.55)
[H⁺] = 2.238 × 10^(-12) M
To know more about pH, here
brainly.com/question/491373
#SPJ4
The atmospheric pressure on top of Mt. Everest (elevation 29,028) is 250. torr. Calculate the atmospheric pressure in mmHg and atm. Round each of your answers to 3 significant digits.
The atmospheric pressure on top of Mt. Everest is 250 mmHg and 0.328 atm, when rounded to 3 significant digits.
What is Pressure?Pressure is a force that is exerted over a surface area. It is the amount of force applied to an object per unit area. Pressure is typically expressed in units of force per unit of area, such as pounds per square inch (psi) or pascals (Pa). Pressure is an important factor in many areas of engineering, physics, chemistry, and biology.
Atmospheric pressure can be measured in torr (1 Torr = 1mmHg), atm (1 atm = 760mmHg) or in kPa (1 atm = 101.3kPa).
250 torr = 250 mmHg
250 mmHg / 760 mmHg = 0.328 atm
To learn more about Pressure
https://brainly.com/question/30235826
#SPJ1
ammonia is a weak electrolyte. which of the following is true about the behavior of ammonia in water? question 11 options: ammonia is insoluble in water ammonia forms no ions when it dissolves in water ammonia ionizes completely in water ammonia ionizes only partially in water
Ammonia ionizes only partially in water. Option 4 is correct.
When ammonia dissolves in water, it reacts with water to form ammonium ions (NH₄⁺) and hydroxide ions (OH⁻), according to the equation: NH₃ + H₂O ⇌ NH₄⁺ + OH⁻. However, this reaction is reversible and only a small fraction of ammonia molecules ionize to form ions. As a result, ammonia is classified as a weak electrolyte, meaning that it only conducts electricity weakly in solution.
Weak electrolytes are characterized by their partial ionization in solution, and they have relatively low electrical conductivity compared to strong electrolytes, which ionize completely in solution. Hence Option 4 is correct.
To learn more about Weak electrolytes, here
https://brainly.com/question/29771118
#SPJ4
The cloud droplets in a cloud are formed by water vapor molecules and: A) protons. B) ions. C) molecules of air. D) condensation nuclei.
Answer:
condensation nuclei
Explanation:
if the size of the zinc electrode were doubled, does the cell voltage increase, decrease or stay the same? justify your answer.
In changing the size of the zinc electrode would not impact the voltage of the cell.
If the size of the zinc electrode were doubled, the cell voltage would stay the same. This is because the voltage of a cell is dependent on the difference in potential between the two electrodes, not their size.
Doubling the size of the zinc electrode would not change the potential difference between the zinc and copper electrodes, therefore the cell voltage would remain constant.
The only factor that would affect the cell voltage would be a change in the concentration or temperature of the electrolyte solution or a change in the material or surface area of the copper electrode.
To learn more about : electrode
https://brainly.com/question/18251415
#SPJ11
extend the left chain as far as the simulation allows. what is the base name for an ester with a propyl group attached to the carbonyl carbon atom?
The base name for an ester with a propyl group attached to the carbonyl carbon atom is "propyl ester." In the context of a simulation, you would need to extend the left chain according to the given parameters within the simulation for the specific compound you are working with.
If we extend the left chain of an ester with a propyl group attached to the carbonyl carbon atom as far as the simulation allows, we would have the following structure:
CH3-(CH2)2-C(=O)-OR
Where R represents the rest of the ester molecule.The base name for an ester with a propyl group attached to the carbonyl carbon atom is propyl propanoate. This name is derived from the parent carboxylic acid, which is propanoic acid (also known as propionic acid), and the alcohol used to form the ester, which is propanol (also known as 1-propanol or n-propanol).The esterification reaction between propanoic acid and propanol yields propyl propanoate as the ester product, with the elimination of a molecule of water. The ester is commonly used as a flavor and fragrance ingredient in various food and cosmetic products.
Learn more about propyl here
https://brainly.com/question/9086530
#SPJ11
6Na + Fez0g -> 3NazO + 2Fe
If you are provided 200g of sodium and 250 grams of iron(Ill) oxide, how much of excess reagent is left?
The amount of excess reagent that will remain would be 11.76 g.
Stoichiometric problemTo determine the excess reagent in the reaction, we need to first determine which reactant is limiting and which reactant is in excess.
The balanced chemical equation for the reaction is:
6Na + Fe2O3 -> 3Na2O + 2Fe
The molar mass of Na is 23 g/mol, and the molar mass of Fe2O3 is 159.69 g/mol (2 x 55.85 g/mol for Fe + 3 x 16 g/mol for O).
Using the given masses, we can calculate the number of moles of each reactant:
Number of moles of Na = 200 g / 23 g/mol = 8.70 molNumber of moles of Fe2O3 = 250 g / 159.69 g/mol = 1.57 molAccording to the balanced chemical equation, 6 moles of Na react with 1 mole of Fe2O3. Therefore, the number of moles of Na required to react with 1.57 mol of Fe2O3 is:
(1.57 mol Fe2O3) x (6 mol Na/1 mol Fe2O3) = 9.42 mol Na
Since we only have 8.70 mol of Na available, it is the limiting reagent. This means that Fe2O3 is in excess.
To determine the amount of excess Fe2O3, we need to calculate how much Fe2O3 is required to react with 8.70 mol of Na:
(8.70 mol Na) x (1 mol Fe2O3/6 mol Na) x (159.69 g/mol Fe2O3) = 238.24 g Fe2O3
Since we only have 250 g of Fe2O3, the amount of excess Fe2O3 is:
250 g - 238.24 g = 11.76 g
Therefore, the amount of excess Fe2O3 left after the reaction is 11.76 g.
More on stoichiometry can be found here: https://brainly.com/question/29775083
#SPJ1
what fraction of a population of these cofactors would be in the nad form in a ph 7.0 solution with a potential of -300 mv vs nhe?
The fraction of the cofactors in the NAD form would be:
[NADH]/([NADH] + [NAD+]) = 1/237.8 = 0.0042 or approximately 0.4%.
To determine the fraction of a population of cofactors that would be in the NAD form at a given pH and potential, the Nernst equation can be used. For the reduction reaction of NAD+ to NADH, the standard reduction potential (E°) is -0.32 V. At a pH of 7.0, the Nernst equation can be written as:
E = E° - (RT/nF)ln([NADH]/[NAD+]
Where:
E = potential of the half-reaction
R = gas constant
T = temperature in Kelvin
n = number of electrons transferred
F = Faraday constant
[NADH]/[NAD+] = ratio of reduced to oxidized forms of the cofactor
Substituting the given values, we get:
-300 mV = -0.32 V - (RT/2F)ln([NADH]/[NAD+])
Solving for ln([NADH]/[NAD+]), we get:
ln([NADH]/[NAD+]) = -(2F/RT)(-300 mV + 0.32 V)
ln([NADH]/[NAD+]) = 5.47
Taking the exponential of both sides, we get:
[[tex]NADH]/[NAD+] = e^(5.47) = 236.8[/tex]
Therefore, the fraction of the cofactors in the NAD form would be:
[NADH]/([NADH] + [NAD+]) = 1/237.8 = 0.0042 or approximately 0.4%.
Learn more about the cofactors
https://brainly.com/question/28207649
#SPJ4
Boyle's Law: If it takes 0.0500L of oxygen gas kept in a cylinder under pressure to fill an evacuated 4.00L reaction vessel in which the pressure is 0.980atm. What was the initial pressure of the gas in the cylinder?
which of the following is not a postulate of the kinetic-molecular theory? question 4 options: the molecules of a gas move rapidly, constantly, and in straight lines. the average kinetic energy of the molecules of a gas is directly proportional to the kelvin temperature. a gas exerts pressure because the gas molecules repel each other. the molecules of a gas are small compared to the distance between them.
Answer:
the answer is D. the molecules of a gas are small compared to the distance between them
Explanation:
The postulates of Kinetic-Molecular Theory are as follows:
The molecules of a gas move rapidly, constantly, and in straight lines.
The average kinetic energy of the molecules of a gas is directly proportional to the Kelvin temperature.
A gas exerts pressure because the gas molecules repel each other.
The molecules of a gas are small compared to the distance between them1.
Therefore, “the molecules of a gas are small compared to the distance between them” is not a postulate of Kinetic-Molecular Theory
what is the iupac name for the compound shown? a 6 carbon ring has two alcohol substituents on carbons 1 and 3.
The IUPAC name for the compound shown of a 6 carbon ring has two alcohol substituents on carbons 1 and 3 is cyclohexane-1,3-diol.
The compound shown is called cyclohexane-1,3-diol.
It has a place with the group of cyclic alcohols, which are compounds containing both a hydroxyl (- Goodness) bunch and a cyclic construction in their substance structure.
Cyclohexane-1,3-diol is named by the IUPAC classification framework, which relegates an exceptional and precise name to a given compound in view of its sub-atomic construction.
For this situation, the prefix "cyclo" shows the presence of a cycloalkane ring, explicitly a six-membered ring (cyclohexane). The addition "- diol" demonstrates that there are two hydroxyl (- Gracious) bunches connected to the ring, explicitly at positions 1 and 3.
Accordingly, cyclohexane-1,3-diol is the right IUPAC name for this compound.
To learn more about IUPAC name, refer:
https://brainly.com/question/29926700
#SPJ4
Which of the following is evidence for a chemical reaction?(a) Dropping sodium metal into water gives a yellow flame.(b) Dropping iron metal into acid produces gas bubbles.
Both options (a) and (b) are evidence for a chemical reaction.
In option (a), the yellow flame is an indication that a chemical reaction has occurred between the sodium metal and water, producing hydrogen gas and sodium hydroxide.
In option (b), the gas bubbles produced indicate that a chemical reaction has occurred between the iron metal and the acid, producing hydrogen gas and iron(II) ions. Based on the given options, evidence for a chemical reaction can be observed in both (a) and (b).
In (a), dropping sodium metal into water produces a yellow flame, indicating a chemical reaction as new substances are formed. In (b), dropping iron metal into acid produces gas bubbles, which also signifies a chemical reaction as a new product, in this case gas, is generated.
To learn more about chemical reaction click here
brainly.com/question/29039149
#SPJ11
the sour mash used to make distilled spirits is blank . multiple choice question. the acidic product resulting from malolactic fermentation the liquid fermented grain collected from a previous batch the liquid fermented grain collected from beer fermentation the acidic product resulting from beer fermentation
The sour mash used to make distilled spirits is blank is the liquid fermented grain that is collected from the previous batch.
The Sour mash or we can say that the sourmash is the process that is used in the industry of the distilling which uses the material from the older batch of the mash and to start the fermentation for the new batch, the analogous to the make of the sourdough bread with the starter.
Therefore, the liquid fermented grain that is collected from the previous batch is the sour mash used to make the distilled spirits is blank.
To learn more about fermentation here
https://brainly.com/question/20662833
#SPJ4
PLEASE ANSWER ASAP
1. How many atoms are present in 8.500 mole of chlorine atoms?
2. Determine the mass (g) of 15.50 mole of oxygen.
3. Determine the number of moles of helium in 1.953 x 108 g of helium.
4. Calculate the number of atoms in 147.82 g of sulfur.
5. Determine the molar mass of Co.
6. Determine the formula mass of Ca3(PO4)2.
IT WOULD BE HELPFUL
1) 5.1167 x 10²⁴atoms of chlorine. 2) 248.00 g. 3) 4.8825 x 10⁷ moles of helium. 4) 2.7757 x 10²⁴ atoms of sulfur. 5) Molar mass of Co (cobalt) is 58.93 g/mol. 6) Formula mass = 310.18 g/mol.
What is meant by formula mass?Sum of the atomic masses of all the atoms in chemical formula is called formula mass
1.) Number of atoms = 8.500 moles x 6.022 x 10²³ atoms/mole = 5.1167 x 10²⁴ atoms of chlorine.
2.) Molar mass of oxygen is 16.00 g/mol. Therefore:
Mass of 15.50 moles of oxygen = 15.50 moles x 16.00 g/mol = 248.00 g.
3.) Molar mass of helium is 4.00 g/mol. Therefore, the number of moles of helium in 1.953 x 10⁸ g is:
Number of moles = 1.953 x 10⁸ g / 4.00 g/mol = 4.8825 x 10⁷ moles of helium.
4.) Molar mass of sulfur is 32.06 g/mol. Therefore, the number of moles of sulfur in 147.82 g is:
Number of moles = 147.82 g / 32.06 g/mol = 4.6084 moles of sulfur.
To find the number of atoms, we can use Avogadro's number again:
Number of atoms = 4.6084 moles x 6.022 x 10²³ atoms/mole = 2.7757 x 10²⁴ atoms of sulfur.
5.) Molar mass of Co (cobalt) is 58.93 g/mol.
6.) Ca₃(PO₄)₂ contains 3 calcium atoms, 2 phosphorus atoms, and 8 oxygen atoms.
Atomic masses of these elements are:
Calcium (Ca) = 40.08 g/mol
Phosphorus (P) = 30.97 g/mol
Oxygen (O) = 16.00 g/mol
Therefore, formula mass of Ca₃(PO₄)₂ is:
Formula mass = (3 x 40.08 g/mol) + (2 x 30.97 g/mol) + (8 x 16.00 g/mol)
= 120.24 g/mol + 61.94 g/mol + 128.00 g/mol
= 310.18 g/mol.
To know more about formula mass, refer
https://brainly.com/question/21334167
#SPJ1
given two orbitals as linear combinations of two atomic orbitals on carbon atom in ethene: where the hydrogen-like atomic orbitals are orthonormal. what is the value of the overlap integra
the overlap integral simplifies to:
S = c1c2 + d1d2d1d2.
To calculate the overlap integral between two linear combinations of atomic orbitals on a carbon atom in ethene, we first need to express the orbitals in terms of the hydrogen-like atomic orbitals. Let's assume that the two orbitals are denoted as ψ1 and ψ2, and can be expressed as linear combinations of the hydrogen-like atomic orbitals ϕ1 and ϕ2 as follows:
ψ1 = c1ϕ1 + d1ϕ2
ψ2 = c2ϕ1 + d2ϕ2
where c1, d1, c2, and d2 are constants.
The overlap integral between these two orbitals can be calculated using the following formula:
S = ∫ψ1ψ2*dτ
where dτ represents the infinitesimal volume element.
Substituting for ψ1 and ψ2, we get:
S = ∫(c1ϕ1 + d1ϕ2)(c2ϕ1 + d2ϕ2)*dτ
Expanding the product, we get:
S = c1c2∫ϕ1ϕ1*dτ + c1d2∫ϕ1ϕ2*dτ + d1c2∫ϕ2ϕ1*dτ + d1d2∫ϕ2ϕ2*dτ
Since the hydrogen-like atomic orbitals are orthonormal, the integral of ϕ1ϕ2 and ϕ2ϕ1 will be zero. Therefore, we can simplify the expression as follows:
S = c1c2∫ϕ1ϕ1*dτ + d1d2∫ϕ2ϕ2*dτ
Using the orthonormality of the hydrogen-like atomic orbitals, we know that the integral of ϕ1ϕ1 and ϕ2ϕ2 will both be equal to 1. Therefore, the overlap integral simplifies to:
S = c1c2 + d1d2d1d2.
In order to calculate the value of S, we need to know the values of the constants c1, d1, c2, and d2. These constants will depend on the specific linear combinations of atomic orbitals that we are considering. Without this information, we cannot calculate the value of the overlap integral.
Visit to know more about Integral:-
brainly.com/question/22008756
#SPJ11
If two orbitals as linear combinations of two atomic orbitals on carbon atom in ethene, then value of the overlap integral [tex]S_{12} = \int{\phi_{1}}^{*}\phi_{2}d \tau[/tex], is equals to zero. So, option(b) is correct.
Orthonormal atomic orbitals are follow the following property:
[tex]\int{ m _i }* n_i d\tau = 1[/tex][tex]\int m_i^{*} n_j d\tau = 0[/tex]Now, we have provide that two orbitals are as a linear combinations of two atomic orbitals on carbon atom in ethene. [tex]\phi_{1 } = \frac{1}{ \sqrt{2} } ( {\psi_{2s }} + {\psi_{2p }}_{2})[/tex]
[tex]\phi_{2 } = \frac{1}{ \sqrt{2} } ( \psi_{2 s} - {\psi_{2p} }_{2})[/tex]
In the ethylene molecule, consists each carbon atom is bonded to two hydrogen atoms. Therefore, for the C-H, σ bond (sp²(C) - 1s(H)) in ethylene, the two sp² hybrid orbitals overlap with the 1s orbitals of the two hydrogen atoms. Let the hydrogen-like atomic orbitals, [tex]\psi_{2 s} and {\psi_{2p} }_{2}[/tex] are orthonormal to each other. So, the overlap integral [tex]S_{12} = \int{ \phi_{1}}^{*}\phi_{2}d \tau[/tex]
[tex] = \int \frac{1}{\sqrt{2}}( \psi_{2s} + {\psi_{2p} }_{2}) \frac{1}{\sqrt{2}}( \psi_{2s} - {\psi_{2p} }_{2})d \tau\\ [/tex]
[tex] = \frac{1}{\sqrt{2}}( \int \psi_{2s}\psi_{2s} d \tau + \int {\psi_{2p} }_{2}\psi_{2s} d \tau - \int \psi_{2s} {\psi_{2p}}_{2} d \tau - \int {\psi_{2p} }_{2} {\psi_{2p} }_{2} d \tau) \\ [/tex].
Using above formula, [tex]\psi_{2 s} [/tex] and [tex]{\psi_{2p} }_{2}[/tex] are orthonormal so, [tex]\int \psi_{2 s} {\psi_{2p} }_{2} d\tau = 0[/tex]. Also [tex]\psi_{2 s} [/tex] and [tex]\psi_{2 s}[/tex] are normalised so [tex]\int \psi_{2 s} \psi_{2 s} d\tau = 1[/tex]. Similarly [tex]\int {\psi_{2p} }_{2} {\psi_{2p} }_{2} d\tau = 1 [/tex].
Substitute all integral values in equation (1),
= 1 + 0 - 0 - 1
= 0
Hence, the required integral value is 0.
For more information about atomic orbitals, visit :
https://brainly.com/question/30911211
#SPJ4
Complete question:
given two orbitals as linear combinations of two atomic orbitals on carbon atom in ethene:
[tex]\phi_{1 } = \frac{1}{ \sqrt{2} } ( {\psi_{2s }} + {\psi_{2p }}_{2})[/tex]
[tex]\phi_{2 } = \frac{1}{ \sqrt{2} } ( \psi_{2 s} - {\psi_{2p} }_{2})[/tex]
where the hydrogen-like atomic orbitals are orthonormal. what is the value of the overlap integral,
[tex] S_{12} = \int \phi_{1} \times \phi_{2}dr[/tex]
a) 1
b) 0
c) 1.5
d) 2
if a glass manufacturer has only a few of reducing pollutants, it will .
If a glass manufacturer has only a few costly ways of reducing pollutants, it will end up paying the pollution tax, option A.
A chemical or energy that is introduced into the environment and has negative consequences or reduces the usability of a resource is referred to as a pollutant or new entity. These can be either anthropogenic in origin (i.e., produced materials or results of biodegradation) or naturally formed (i.e., minerals or extracted chemicals like oil). When pollutants are present in sufficient quantities to have noticeable detrimental effects on the environment or public health, pollution results.
By altering the development rate of plant or animal species, or by affecting human amenities, comfort, health, or property values, a pollution may inflict long- or short-term damage.
Learn more about Pollutants:
https://brainly.com/question/31449907
#SPJ4
Complete question:
If a glass manufacturer has only a few ________________ of reducing pollutants, it will ____________________ .
A. costly ways; end up paying the pollution tax.
B. inexpensive ways; incur the pollution tax instead.
C. costly ways; do so to minimize its pollution taxes.
D. inexpensive ways; buy the most expensive technology.
When baking soda is heated it decomposes according to the following reaction:
2 NaHCO3(s) ⇌ Na2CO3(s) + H2O(g) + CO2(g)
If sufficient baking soda is placed in a container and heated to 90°C, the total pressure of the gases is 0. 5451 atm. What is the value of Kp at that temperature?
The value of Kp at 90°C is zero. This indicates that the decomposition of baking soda at this temperature is essentially complete, and the equilibrium lies far to the right.
We can use the expression for the equilibrium constant Kp, which is given by:
Kp = (P([tex]CO_{2}[/tex] ) × P([tex]H_{2} O[/tex])) / (P([tex]Na_{2} CO_{3}[/tex] ))
where P([tex]CO_{2}[/tex]), P([tex]H_{2} O[/tex]), and P([tex]Na_{2} CO_{3}[/tex]) are the partial pressures of carbon dioxide, water vapor, and sodium carbonate, respectively, at equilibrium.
From the balanced equation, we know that for every 2 moles of [tex]NaHCO_{3}[/tex]that decompose, 1 mole of [tex]CO_{2}[/tex] is produced. Therefore, the partial pressure of [tex]CO_{2}[/tex] can be calculated as:
P([tex]CO_{2}[/tex] ) = (1/2) × (total pressure) = 0.2726 atm
Similarly, for every 2 moles of [tex]NaHCO_{3}[/tex] that decompose, 1 mole of Na2CO3 is produced. Therefore, the partial pressure of [tex]Na_{2} CO_{3}[/tex]can be calculated as:
P([tex]Na_{2} CO_{3}[/tex]) = (1/2) × (total pressure) = 0.2726 atm
Finally, the partial pressure of water vapor can be calculated as the difference between the total pressure and the partial pressures of CO2 and [tex]Na_{2} CO_{3}[/tex]:
P([tex]H_{2} O[/tex]) = (total pressure) - P([tex]CO_{2}[/tex]) - P([tex]Na_{2} CO_{3}[/tex]) = 0.5451 - 0.2726 - 0.2726 = 0.0 atm
This means that there is no water vapor present at equilibrium, and we can assume that its partial pressure is zero. Substituting these values into the expression for Kp, we get:
Kp = (P([tex]CO_{2}[/tex]) × P([tex]H_{2} O[/tex])) / (P([tex]Na_{2} CO_{3}[/tex]))
= (0.2726 × 0.0) / 0.2726
= 0.0
Therefore, the value of Kp at 90°C is zero. This indicates that the decomposition of baking soda at this temperature is essentially complete, and the equilibrium lies far to the right.
Learn more about temperature ,
https://brainly.com/question/11464844
#SPJ4
consider the pictured structure of a dipeptide. dipeptide structure with labels a through d. the a label is at the end of the molecule with the positively charged nh3 group. the b label is placed by the bond between the carbonyl group and the amine. the c label is next to a carbon with shown single bonds to the carboxylate, a ch2oh, and the rest of the molecule. the d label is next to the carboxylate at the end of the molecule. what does each label on the structure represent?
The dipeptide structure with labels a through d represents the different functional groups and atoms present in the molecule.
Label a is located at the end of the molecule with the positively charged NH3 group, indicating the presence of an amino group. The b label is placed by the bond between the carbonyl group and the amine, indicating the presence of a peptide bond.
Label c is next to a carbon with shown single bonds to the carboxylate, a CH2OH, and the rest of the molecule, indicating the presence of a side chain. Finally, the d label is next to the carboxylate at the end of the molecule,
indicating the presence of a carboxylic acid functional group. Understanding the different functional groups and atoms present in the dipeptide structure is important in understanding its properties and behavior in chemical reactions and biological processes.
To learn more about : labels
https://brainly.com/question/29608807
#SPJ11