Inventors such as Lee Deforest and Edwin Howard Armstrong fund their initial R&D ventures into radio technologies. Marconi was funded by the government (England = public mandate (taxes)).
What is radio technologies?Radio technology is the transmission and reception of communication signals that are made up of electromagnetic waves that bounce off the ionosphere or a communications satellite or travel in a straight line through the air.Lee de Forest, who lived from 1873 to 1961 and was known as the "Father of Radio," invented the "Audion" tube. Armstrong's most notable achievement during this period was the development of a "supersonic heterodyne" radio receiver circuit, later abbreviated to "superheterodyne." This circuit, which is still widely used today, improved radio receiver sensitivity and selectivity.To learn more about Radio technology, refer to:
brainly.com/question/14153918
#SPJ1
Which of the following is an example of biomimicry? (Select all that apply.)
a ceramic material that can be given a rough, natural-seeming texture
a support material designed like cartilage in the human body
a synthetic polymer whose internal composition is similar to tree sap
a wood material that when sanded smooth looks remarkably like stone
Answer:
a synthetic polymer whose internal composition is similar to tree sap
a support material designed like cartilage in the human body
a ceramic material that can be given a rough, natural-seeming texture
Explanation:
all of these mimic naturally occurring structures/phenomenon
The manager of a small post office is concerned that the growing...
The manager of a small post office is concerned that the growing township is overloading the one-window service being offered. Sample data are collected on 100 individuals who arrive for service:
TIME BETWEEN
ARRIVALS (MINUTES) FREQUENCY
1 5
2 32
3 35
4 19
5 9
100
SERVICE TIME
(MINUTES) FREQUENCY
1.0 12
1.5 21
2.0 36
2.5 19
3.0 7
3.5 5
100
Using the following random number sequence, simulate six arrivals (Hint: Use random number set from 00 to 99.)
RN: 93, 5, 53, 20, 10, 45, 67, 55, 92, 75, 41, 46, 58, 82, 20, 97, 13, 36
a. Average customer waiting time, in minutes (Round your answer to 4 decimal places.)
Average customer waiting time minutes
b. Average percent idle time for clerks.
Average percent idle time
Answer:
its b
Explanation:
Let's consider the case when we increase the number of elements to 5. How many temperature values will we need to obtain to determine the variation of temperature along the line?
We have a total of 6 nodes with 5 components. We must determine the temperature at each of these six nodes. Mesh refining is the process of increasing the number of elements.
What is temperature?
Temperature is a scientific term that describes how hot or cold something is.There are three types of temperature scales: those described in terms of the average translational kinetic energy per freely moving microscopic particle in a body, such as an atom, molecule, or electron, such as the SI scale; those which rely solely on purely macroscopic properties as well as thermodynamic principles, including such Kelvin's original definition; and those that are not defined by theoretical principles, and yet are defined by convenient empirical properties of particulate matter.
To learn more about temperature
https://brainly.com/question/2339046
#SPJ13
The point in an electrical circuit schematic where high
voltage is stepped down to low voltage is at what
component?
Select one:
O A. Contactor
O B. Solenoid
O C. Relay
O D. Transformer
The point in an electrical circuit schematic where high voltage is stepped down to low voltage is at transformer.
What do you mean by an electric circuit?
Path for transmitting electric current in an electric circuit. An electric circuit consists of a device that provides energy to the charged particles that make up current, such as a battery or a generator, as well as devices that use current, such as lamps, electric motors, or computers, and the connecting wires or transmission lines. Ohm's law and Kirchhoff's rules are two fundamental laws that quantitatively define the behaviour of electric circuits.
Step-down transformers are used to connect transmission lines with varying voltage levels. They reduce the voltage level from a high to a low value.
So, D is the right answer.
To learn more about electric circuit
https://brainly.com/question/19651288
#SPJ13
tech a says the best way to ensure the torque converter is engaged fully into the pump is to strike the rear of the torque converter with a a hammer in three places. tech b says that the torque converter requires an alignment tool when installing it in the transmission. who is right?
Tech A exists right. Transmission mode refers to the process of moving data from one device to another.
What is meant by transmission?Actually, the act of transmitting involves sending and spreading analog or digital information impulses. Transmission technology primarily refers to responsibilities associated with physical layer protocols, such as line coding, demodulation, and modulation.
The movement of data from one digital device to another is known as data transmission. Through point-to-point data streams or channels, this transmission is carried out.
Transmission mode refers to the process of moving data from one device to another. The communication mode is another name for the transmission mode. Each communication channel has a direction that goes with it, and the direction is provided by the transmission medium.
To learn more about transmission refer to:
https://brainly.com/question/14280351
#SPJ4
Technician A says that weld on attachments may be used on a steel panel. Technician B says that glue on attachments may be used on a steel panel
For joining the attachments on the steel panel both the options such as welding and gluing are prevalent and highly useful.
Welding is considered an excellent procedure to join the thin sheet attachment of a steel panel. The type of welding used for joining the attachments on steel surfaces is typically called tack welding. Tack welding performs very small welds that do not cause any damage to the surface of the steel panel. Hence, technician A is correct who states that on a steel panel, welding may be used on attachments.
Similarly, attachments on the steel materials have the option to be joined with glues. Cyanoacrylate-based adhesives and polyurethane-based glues are considered best to provide the strong joining of attachments as welding. Therefore technician B is also correct who says that glue may be used on steel panels to join attachments. It is because on a steel surface glue cannnot be useable as it is not able to join attachments.
Since both welds and glues can work on steel material in order to join attachments, both technicians are correct.
You can learn more about steel at
https://brainly.com/question/28221478
#SPJ4
what is dbr in om???
The debt-burden ratio (DBR), which includes loan and credit card payments, is the ratio of your total monthly expenses to your gross income.
How is DBR determined?Your debt-burden ratio (DBR), which includes payments for loans and credit cards, is the proportion of your total monthly expenses to your gross income. Banks use this figure to determine your eligibility for loans and credit cards because it reflects your present debts and repayment capacity.While dBm expresses the absolute power level, dB quantifies the ratio between two values. dBm is a dimensionless unit, whereas dB is an absolute unit. While dB is represented in watts and can be relative to various powers, dBm is always relative to 1mW.Your debt-burden ratio (DBR), which includes payments for loans and credit cards, is the proportion of your total monthly expenses to your gross income. Banks use this figure to determine your eligibility for loans and credit cards because it reflects your present debts and repayment capacity.DBR scheduling assists custom manufacturers by locating the resource in a shop that is causing delays, and then builds a plan around that resource to improve the efficiency and performance of the entire shop.To Learn more About dBr, Refer:
https://brainly.com/question/17562254
#SPJ1
4. Your supervisor texts you during the working hours for no reasons. S/he also invited you for a
dinner to discuss your salary increase issue during a weekend. What should be your role based
on the Ontario's Occupational Health and Safety Act ("OHSA") to deal your supervisor? Discuss.
If your supervisor is texting you during work hours for no reason, you should speak to him or her about it. If your supervisor is inviting you to dinner to discuss your salary increase issue, you should tell him or her that you are not comfortable with that and would prefer to discuss it during work hours. Your supervisor's behaviour is inappropriate and violates the Ontario's Occupational Health and Safety Act ("OHSA"). You should discuss the issue with your supervisor and try to resolve the issue. If you are not able to resolve the issue, you can file a complaint with the Ontario Ministry of Labour.
Occupational Safety and Health Act:
The Occupational Safety and Health Act of 1970 is a United States labour legislation that governs federal occupational health and safety law in the private sector and federal government. Congress passed it in 1970, and President Richard Nixon signed it on December 29, 1970.
To learn more about Occupational Safety and Health Act
https://brainly.com/question/15732592
#SPJ13
Question 2
Salt in crude oil must be removed before the oil undergoes processi
fed to a washing unit where fresh water fed to the unit mixes with t
the sal contained in the oil. The oil (containing salt but no water), be
can be removed at the top of the washer. If the "spent" wash water
oil contains 5% salt, determine the concentration of the salt in the w
crude oil (with salt) to water used is 4:1.
The concentration of the salt in the w crude oil (with salt) to water used is 4:1 is 0.0061.
What is crude oil?
Crude oil is a hydrocarbon mixture that exists in liquid form in natural subterranean reservoirs and stays liquid at atmospheric pressure after passing through surface separation facilities.
The salt content of "spent" wash water is 15%.
5% of crude oil is salt.
The crude oil (with salt) to water ratio utilised is 4: 1.
Crude oil fraction:
95% of crude oil = 0.95
0.95F1 = x1E1
0.95(100) = x1E1
95= x1E1
E1 = 95/X1
wash water fraction:
15% of wash water = 100% -15% = 85%
= F2 = 0.85E2
salts fraction:
0.05F1 = (1-X1)E1 + 0.15E2
0.05F1 = (1-X)95/X1 + 0.15(F2/0.85)
0.05F1 = 95/X1 - 95 + 0.15(F2/0.85) (SINCE = 95.588 = 95/X1 = 99.38)
0.05(100) = 95/X1 - 95 + 17.61(1/4F1)
5 = 95/X1 - 95 + 4.41
Fraction of salts = 1- X1 = 0.0061
To learn more about crude oil
https://brainly.com/question/14260176
#SPJ13
what does '' emerging'' mean, emerging technologies and how are they found?
Answer:
The term commonly refers to technologies that are currently developing, or that are expected to be available within the next five to ten years, and is usually reserved for technologies that are creating, or are expected to create, significant social or economic effects.
The result is the delineation of five key attributes that qualify a technology as emerging. These are: (i) radical novelty, (ii) relatively fast growth, (iii) coherence, (iv) prominent impact, and (v) uncertainty and ambiguity.
An engine has a piston with a surface area of 12.56 in2 and can travel 3.48 inches. What is the potential change in volume of the cylinder, given that ΔV = area × length?
The potential change in volume of a cylinder is equal to 43.7088 cubic inches.
How to calculate the volume of a cylinder?Mathematically, the volume of a cylinder can be calculated by using this formula:
V = πr²h
Where:
V represents the volume of a cylinder.r represents the radius of a cylinder.h represents the height of a cylinder.Additionally, the potential change in volume of a cylinder can be calculated by using this formula:
ΔV = area × length
Given the following data:
Surface area = 12.56 in²Length = 3.48 inches.Substituting the given parameters into the formula, we have;
ΔV = 12.56 × 3.48
Change in volume, ΔV = 43.7088 cubic inches.
Read more on cylinder here: brainly.com/question/27535498
#SPJ1
Limitations of Wheatstonestone Bridge methode in measurements
Answer:
For high resistance measurement, the measurement presented by the bridge is so large that the galvanometer is insensitive to imbalance. The other drawback is the resistance change due to the current's heating effect through the resistance.
Explanation:
list any four styles of lettering
Answer:I know more than 4
Explanation:
Traditional calligraphy. Calligraphy is the design and creation of hand lettering with a brush or other writing tool. ...
Gothic lettering. ...
Modern calligraphy. ...
Serif lettering. ...
Sans serif lettering. ...
New lettering styles.
position for an electron is 4.7i - 4.1j + 5.7k find the magnitude
Answer:
for the magnitude we use Pythagoras (with the components) to get: ∣∣∣→A−→B∣∣∣=√(−1)2+(5)2=√1+25=√26≈5.1
The gravitational force exerted on a solid object is 5N. When the object is suspended from a spring scale and submerged in water, the scale reads 3.50 N. Find the density of the object.
The density of the object is 3333.33 kg/m³. The density of an object is a measure of how heavy it is for a given size, i.e. the mass of material per unit volume.
What is gravitational force?Gravity, also known as gravitational force, pulls objects with mass toward each other. We frequently consider the force of gravity from Earth. This force is responsible for keeping your body on the ground. Any object with mass, on the other hand, exerts a gravitational force on all other objects with mass.
Calculation of density of object?Density: This can be defined as the ratio of the mass of a body to its volume.
The unit of density is kg/m³.
From Archimedes principle,
R.d = W/U = D/D'
Where R.d = relative density, W = weight of the object in air, u = upthrust in water, D = Density of the object, D' = Density of water.
W/U = D/D'
making D the subject of the equation
D = D'(W/U).......................... Equation 1
Given: W = 5.0 N, U = 5.0 -3.5 = 1.5 N, D' = 1000 kg/m³
U = lost in weight = weight in air - weight in water
Substitute into equation 1
D = 1000(5/1.5)
D = 3333.33 kg/m³
Thus the density of the object = 3333.33 kg/m³
To learn more about gravitational force, refer to:
https://brainly.com/question/72250
#SPJ1
HELP ME PLEASE !!!!!!
Answer:
what are u needing help with
Explanation:
all u should do is follow the instructions
What transfers the up-and-down motion from the lifter to the
rocker arm
Answer:
Explanation:
The camshaft lobe moves the lifter upwards, which moves the pushrod. The top end of the pushrod pushes on the rocker arm, which opens the valve.
Examination of the timing diagram of the 8237A indicates that once a block transfer begins, it takes three bus clock cycles per DMA cycle. During the DMA cycle, the 8237A transfers one byte of information between memory and I/O device. a. Suppose we clock the 8237A at a rate of 5 MHz. How long does it take to transfer one byte?
The time that it takes to transfer one byte is 1 microseconds.
What is a byte?A byte is a unit of data that is eight binary digits long in most computer systems. Most computers use a byte to represent a character such as a letter, integer, or typographic sign. Each byte can store a string of bits that must be combined to form a larger unit for application purposes.
A stream of bits, for example, can be used to create a visual image for a program that displays images. A string of bits that constitutes the machine code of a computer program is another example.
Four bytes constitute a word in some computer systems, a unit that a computer processor can be built to handle efficiently as it reads and processes each instruction. Some computer processors can handle two-byte or single-byte instructions, depending on their capabilities.
It's important to note that 10 bytes per microsecond equals 10 bytes per microsecond. Therefore, 1 byte will be in 1 microsecond.
Learn more about byte on:
https://brainly.com/question/14927057
#SPJ1
A secondary needle will not be on an indicator with which kind of measurement scale?
Long range
O Short range
Full
Balanced
Answer:
The correct answer would be interval in short range
Explanation:
The pyramids in Egypt are cited as an ancient world wonder. What is the main
reason that the pyramids are important to the study of engineering?
The pyramids are important to the study of engineering because they were some of the first structures built using engineering principles. The pyramids are an example of how engineering can be used to create amazing structures.
What is pyramid?
A pyramid is a structure with triangular exterior surfaces that converge to a single step at the summit, giving the shape the shape of a pyramid in the geometric sense. A pyramid's base can be trilateral, quadrilateral, or any polygon shape. A pyramid, as a result, has at least three exterior triangle surfaces. A typical variant is the square pyramid, which has a square base and four triangular exterior surfaces. The design of a pyramid, with the majority of the weight closer to the bottom and the pyramidion at the apex, means that less material will be pushed down from above. This weight distribution enabled early civilizations to build stable massive constructions.
To learn more about pyramid
https://brainly.com/question/218706
#SPJ13
Technician A says that all-wheel drive vehicles are the same as four-wheel drive vehicles. Technician B says that front-wheel drive drivetrains are the most common on cars today. Who is correct?
According to the question, Technician B is correct because he said that front-wheel drive drivetrains are the most common on cars today.
What is the responsibility of the technician?The responsibility of the technician includes analysis and service of the system, diagnosing the actual problems, performing troubleshooting, testing and running of equipment, repairing or replacing faulty or damaged equipment, etc.
According to the context of this question, technician A conveyed that all-wheel drive vehicles are the same as four-wheel drive vehicles. This is actually not accurate and valid. This is because all-wheel drive vehicles are not the same as four-wheel drive vehicles. It significantly depends on the circumference of the wheel.
Therefore, technician B is correct because he said that front-wheel drive drivetrains are the most common on cars today.
To learn more about Technicians, refer to the link:
https://brainly.com/question/18428188
#SPJ1
the highway department is to design a roadway over a swamp area. the swamp consists of very soft fine-grained soils obviously saturated. the basic idea is to build a relatively small embankment above the flood level. how would you propose to build the embankment, fast, slow, or in stages? explain.
I'd like to propose that the embankment be built in stages. Because of the possibility of abrupt coloase of structure in swampy places. Soil carrying capacity is extremely low in those places. You must first densify the soil and make it acceptable using various procedures such as grouting, vibrification, restricting, and so on. These types of jobs are critical during the earliest stages of embankment development. After that, we can begin our construction work.
What is soil?
Soil, often known as earth or soil, is a complex mixture of organic matter, minerals, gases, liquids, and creatures that support life. Some scientific definitions distinguish dirt from soil by limiting the former term to displaced soil only. Soil is made up of two phases: a solid phase of minerals and organic matter and a porous phase that retains gases and water. As a result, soil is a three-state system composed of solids, liquids, and gases. Soil is the result of various elements interacting throughout time, including climate, relief, creatures, and the parent components of the soil.
To learn more about soil
https://brainly.com/question/28201561
#SPJ4