Answer:
by using this formula 2×(n)^२
Answer:
M-A=N
Explanation:
M-A=N
Here is an example.
The equation above means that the atomic number (A) subtracted from the average atomic mass (M) equals the combined amount of neutrons and protons. Since we know that 35 17Cl is Chlorine (this is because Chlorine (Cl) is the 17th number on the periodic table and has the average atomic mass of 35), we can insert our data into the equation and end up with the following:
35-17=18.
From here, we can tell that we have a mix of neutrons and protons, with the total being 18. Since the atomic number is 17, we can reasonably assume that there are 17 protons and 1 neutron.
But we still need to find the number of electrons. Fortunately, the number of electrons is always equivilant to the number of protons and the atomic mass, so we know that the number of electrons is 17.
So, we have;
17 Protons
1 Neutron
17 Electrons
two samples of solids have similar reactivity with acids and similar densities. their masses and volumes, however, are not at all similar. is it possible that these are the same substance?
Given that the volume and mass of a substance are not defining properties, it is entirely possible for two samples with different volumes and mass to be the same substance.
What are defining properties of a substance?These are properties that can help us to identify a substance. The most useful of which tend to be chemical properties such as reactiveness or melting points. Colors and density can also offer the insight needed to identify elements and substances. Mass and volume are not properties of a substance given that they can change often depending on the sample size and thus do not help to identify a substance.Therefore, since the volume and mass of a substance are not defining properties of a substance, we can confirm that it is entirely possible for two samples with different volumes and mass to be the same substance.
To learn more about properties of elements visit:
https://brainly.com/question/11838894?referrer=searchResults
FOR THE LOVE OF GOD SOMEONE PLEASE HELP ME
WHAT IS THE OXIDATION NUMBER OF THE S IN SO^-2 ???
Answer:
The oxidation number for sulfur in SO2 is +4.
Explanation:
To find the oxidation number of sulfur, it is simply a matter of using the formula SO2 and writing the oxidation numbers as S = (x) and O2 = 2(-2) = -4. Using the rule and adding the oxidation numbers in the compound, the equation becomes x +(-4 ) = 0. Solving for x, it is evident that the oxidation number for sulfur is +4.
What are ocean currents?
Answer:
What are ocean currents?Ocean currents are continuous movements of water in the ocean that follow set paths, kind of like rivers in the ocean.what’s chemical formula ammonium iodide?
Answer:
NH4I
..................
I hope it helps
Answer:Ammonium Iodide is a chemical compound with a formula Explanation: nh4l
What is the frequency of 14000 X ray photons having an energy of 5.27*10-5 J/Hz
The frequency of the X - ray is [tex]7.95 \times 10^{28} \ Hz[/tex].
The given parameters:
Energy of the X-ray, E = 5.27 x 10⁻⁵ JThe frequency of the wave is calculated as follows;
[tex]E = hf\\\\f = \frac{E}{h} \\\\[/tex]
where;
h is Planck's constant = 6.626 x 10⁻³⁴ J/HzSubstitute the given parameters;
[tex]f = \frac{E}{h} \\\\f = \frac{5.27 \times 10^{-5} }{6.626 \times 10^{-34}} \\\\f = 7.95 \times 10^{28} \ Hz[/tex]
Thus, the frequency of the X - ray is [tex]7.95 \times 10^{28} \ Hz[/tex].
Learn more about frequency of radiation here: https://brainly.com/question/13400312
five (5) muscular injuries and disease
Answer:
tendinitis.
carpal tunnel syndrome.
osteoarthritis.
rheumatoid arthritis (RA)
fibromyalgia.
bone fractures.
Which of the following statements describes sound energy?
Sound energy does not travel at all.
Sound energy needs a medium to travel through.
Sound energy can travel in empty space.
Sound energy can only travel through air.
Answer:
C.
Explanation:
What does the answer of element 3Na2S2O3?
Answer:
Explanation:
3× 22+2×32+ 6×16=
66+64+96=236
20 PIONTS PLZ HELP
What mass of calcium chloride is needed to make 330.0 mL of 0.125 M
solution?
Answer:
4.58g
Explanation:
1.) What is the molar mass of CaCI2?
= 110.98 g/mol
2.) Find the mols
[tex]conc = \frac{mol}{volume(l)} [/tex]
conc × volume= mol
0.125 M x 0.33 L = 0.04125mol ( 330mL was converted to "L" by dividing 330 by 1000)
3.) The mass(g)
g= mol x atomic weight
g= 110.98g/mol × 0.04125
= 4.58 g
# NOTE M = mol/L
Please help me with this
Beer Lambert Law Explanation
Answer:
The Beer–Lambert law, also known as Beer's law, the Lambert–Beer law, or the Beer–Lambert–Bouguer law relates the attenuation of light to the properties of the material through which the light is travelling.
Explanation:
Please Mark as brainliest
1. While on a movie set, a stuntman jumps off
the roof of a building. As he falls toward an
airbag, what is increasing?
A. gravity
B. wind velocity
C. kinetic energy
D. potential energy
kinetic energy kkkkkkkkkk
After moving down a group in the periodic table, the number of valence electrons
the number of Valence electrons remains the same
What mass of sugar and water is needed to make 40 g of 10% solution?
Answer
16g
Percent by mass= mass of solute/mass of solution * 100
Explanation: work out the equation
Which of the following could be classified as producing a physical change?
A. Burning a candle
B. Leaving a bicycle outside to rust
C. Bending sheet metal
D. Toasting a slice of bread
Answer:
C. Bending sheet metal.
Explanation:
The metal is still intact. No change in chemical bonds have occurred.
Burning a candle is converting wax into heat, CO2 and carbon soot.
A rusting bicycle is converting goof iron, Fe, into iron oxide (rust, Fe2O3)
Toasting bread is more difficult to define. If the bread is just warmed, then it is physical. If it is toasted (browned/burned), then a few surface molecules have been converted into tasty carcinogens, my favorite poison.
What is the difference between a conductor and an insulator?
The Lewis dot model of an atom has seven dots. Which of the following is true about the atom?
A) it has seven energy levels.
B) it has one valance shell electron.
C) it requires one electron to complete it’s octet.
D) it requires seven other atoms to form a stable compound.
It requires one electron to complete its octet
The Lewis dot model of an atom has seven dots. The statement true about atom is,
It requires one electron to complete it’s octet.So, option C is correct one.
What is Lewis dot model?The simple representation of the valence shell electrons in a molecule.The Lewis structure is also known as Lewis dot formula, electron dot structure, Lewis dot structure, Lewis electron dot structure.It is used to show the arrangement of electrons around individual atoms in the molecule. In this representation valence electrons of atom is shows as dot or bonding electrons as a line between two atoms.What is valence electrons?The electron/electrons present in valence shell is called valence electrons. Each atoms require eight electrons to complete their octet or valence shell.
To learn more about Lewis dot model here.
https://brainly.com/question/17735032
#SPJ2
A penny is 0.061 inches thick. What is the value of the 6 in the thickness of a penny? Mathematics not chemistry
Answer:
because of the location of the 6 the answer is 6 cent
Answer:
Hundredths
Explanation:
$6 times 1/$100. The 0 is tenths, the 6 is hundredths and the 1 is thousandths.
What is pseudoscience and how is it different from science
Answer:
a difference in attitude
Explanation:
It's just not science. ... The big difference Popper identifies between science and pseudo-science is a difference in attitude. While a pseudo-science is set up to look for evidence that supports its claims, Popper says, a science is set up to challenge its claims and look for evidence that might prove it false.
What is the relationship between plants soil and fertilizers?
the bradford assay only works at low protein concentrations
Answer:
Dilute the sample
Explanation:
The statement is not entirely accurate. The Bradford assay is commonly used to determine protein concentrations in a sample.
However, it is true that the Bradford assay is more accurate and reliable for measuring protein concentrations at low to moderate levels rather than at very high concentrations.
The Bradford assay is based on the binding of Coomassie Brilliant Blue dye to proteins. The dye undergoes a color change from brown to blue when bound to proteins, allowing for the measurement of protein concentrations. At low protein concentrations, the binding of the dye to proteins is well-calibrated and results in a linear relationship between protein concentration and color intensity, making it suitable for accurate quantification.
At high protein concentrations, the binding capacity of the dye may become saturated, leading to non-linear and less accurate measurements. The excess protein can also cause interference and affect color development. In such cases, dilution or alternative protein quantification methods may be more suitable, such as the BCA assay or the Lowry assay.
Therefore, while the Bradford assay can be used to measure protein concentrations across a range of concentrations, it is generally more reliable for low to moderate protein concentrations.
Learn more about proteins here:
https://brainly.com/question/30986280
#SPJ 6
The last layer in layered design is _____________. Object Process None of the options Atoms Sub process
The last layer in the layered design is system layer so none of the above is the correct option.
Robotic Process Automation is a software technology that make use of some programs of computer to copy or mimic the behaviors of human when it has access with them. They been use effectively and ensure the work is perfectly done.
There are layers in the Robotic process automation but the last layer is System layer.
They can handle high volume of tasks.
The lowermost layer is associated with individual screen interactions. The lowermost layer in the layered design of Robotic process automation is the component layer or system layer . The Robotic Process Automation and this form technology is in robots creation.
Therefore, The last layer in layered design Is System layer so none of the above is the correct option.
Learn more about Robotic process automation from the link below.
https://brainly.com/question/41671370
what is a tidal barrage
plase explaine
Answer:
A dam like structure used to capture energy from masses of water moving in or out of a bay of rivers due to tidal force is called tidal barrage.
Explanation:
It may help you to solve question.
HURRY I HAVE 20 MIN LEFT will mark brainllest When. Coach Kwan notices that a player is getting tired, she takes out the tired player and substitutes a fresh player. Which type of chemical reaction does this best model?
replacement
decomposition
synthesis
oxidation
A compound has a molar mass of 163.59 g/mol. If you have 736.155 grams of this compound, how many moles do you have?
Answer:
4.50000 moles
Explanation:
This is dimensional analysis. If there is 163.59 grams in 1 mole of this compound then the converse is true: in 1 mole of this compound there is 163.59 grams --> 1 mol/163.59 grams.
Now that you have your conversion factor:
736.155 grams * (1 mol/163.59 grams) is your equation.
When you multiply these together, grams cancel and you end up with the desired mole-based answer:
4.50000 moles (The extra zeros are to make up for the 6 significant figures in 736.155, feel free to omit them if necessary.)
(pls give brainliest if this helped)
which two body systems are primarily responsible for locomotion
Locomotion and movement are brought about by skeletal and muscular system of the body. It’s a coordinated event of the skeletal and muscular system brought by contraction and relaxation of muscles.
How does locomotion occur in our body?
Locomotion occurs with help of specialised muscles, muscular and non-muscular by nature.
It involves the interaction of muscles (tendons and ligaments) and skeletal joints and cartilage
Locomotion is a voluntary action which require involvement of the nervous system.
In muscles actin and myosin protein forms cross bridges, consuming ATP.
Hence, to bring about locomotion skeletal and are responsible.
Learn more about locomotion.
https://brainly.com/question/13343069
#SPJ2
For an electric toothbrush, is input energy equal to useful output energy? Explain
your answer.
No, input energy is not equal to useful output energy, if it is an electric toothbrush.
What is the useful type of energy produced in an electric toothbrush?Electrical Energy is the useful type of energy produced in an electric toothbrush.
If input energy is equal to useful output energy. This means that the total amount of energy that is in an isolated system (such as an engine or a generator) remains constant (conserved) over time.
However, the total amount of useful energy output of an isolated system is never equal to the total energy input.
Learn more about the electric toothbrush here:
https://brainly.com/question/8318282
#SPJ1
What is the minimum uncertainty in a simultaneous measurement of the y-component of the proton's velocity?.
Answer: c
Explanation:
A Herbig-Haro (HH) object is:_:_________.
a. a small galaxy just outside the outer edge of the Milky Way
b. where a jet from a star in the process of being born collides with (and lights up) a nearby cloud of interstellar matter
c. a part of a giant molecular cloud where molecules containing two hydrogen atoms form
d. a star that has too little mass to start fusion in its core
e. cluster of very low-mass stars, observable only with infrared radiation
Given what we know about Herbig-Haro (HH) objects, we can confirm that they are born from the collision between a jet from a star and clouds of interstellar matter.
What are Herbig-Haro (HH) objects?To put it simply, a Herbig-Haro (HH) object is what we observe as a bright spot in distant space. Upon closer observation we can observe that these giant bright patches are not lone objects, but in fact immense groups of interstellar matter. How Herbig-Haro (HH) objects are formed.The formation of one of these interstellar groups requires an immense amount of energy. This energy come from the speed at which the materials that form these objects collide.As stated in the question, the jet released from a star in the process of being born smashes into a giant cloud of dust and interstellar material to form the Herbig-Haro (HH) objects. This collision happens at hundreds of km/s. To put it into perspective, it would be roughly 500,000 miles per hour.Therefore, we can confirm that option b, which states, "where a jet from a star in the process of being born collides with (and lights up) a nearby cloud of interstellar matter", is the correct choice for the question pertaining to Herbig-Haro (HH) objects.
To learn more about interstellar space visit:
https://brainly.com/question/7106246
How many oxygen atoms
in a molecule of table sugar (C12H22011)?
ОА 45
ООО
В. 22
с 12
Op. 11
SUBMIT
Answer:
6.6242 x 10 ^ 24
Explanation:
This is the correct answer because you know there is 11 oxygen moles in 1 mole of sugar so using dimensional analysis you can solve it. You start will 11 moles of oxygen, and multiply by Avogadro's number(6.022 x 10 ^23) to get the amount of atoms. I don't see it as an answer, but I am confident in this, so I would ask your teacher specifically.
Hope this helps!
The balanced equation shows how sodium chloride reacts with silver nitrate to form sodium nitrate and silver chloride. NaCl AgNO3 Right arrow. NaNO3 AgCl If 4. 00 g of NaCl react with 10. 00 g of AgNO3, what is the excess reactant? AgCl NaCl AgNO3 NaNO3.
The reactant that has been present in excess in the reaction has been NaCl. Thus, option B is correct.
The balanced chemical equation has been:
[tex]\rm NaCl\;+\;AgNO_3\;\rightarrow\;NaNO_3\;+\;3\;AgCl[/tex]
From the balanced equation, for complete utilization of 1 mole of sodium chloride, 1 mole of silver nitrate has been used.
The moles of can be given as:
[tex]\text Moles\;=\;\dfrac{m}{mwt}[/tex]
Where, mass of Silver nitrate, [tex]m=10\;\text g[/tex]
Molecular mass of silver nitrate, [tex]mwt=168\9.87\;\text {g/mol}[/tex]
Substituting the values, moles of silver nitrate has been:
[tex]\rm Moles \;AgNO_3=\dfrac{10}{169.87} \\Moles \;AgNO_3=0.058\;mol[/tex]
Mass of sodium chloride, [tex]m=4\;\text g[/tex]
Molecular mass of sodium chloride, [tex]mwt=58.44\;\text {g/mol}[/tex]
Substituting the values, moles of sodium chloride has been:
[tex]\rm Moles\;NaCl=\dfrac{4}{58.44}\\Moles\;NaCl=0.068\;mol[/tex]
From the balanced chemical equation,
[tex]\rm 1\;moles\;AgNO_3=1\;moles\;NaCl\\0.058\;mol\;AgNO_3=0.058\;mol\;NaCl[/tex]
Since, the available moles of NaCl has been 0.06 mol, and used NaCl has been 0.05 mol. Thus, NaCl has been the excess reactant. Hence, option B is correct.
For more information about the excess reactant, refer to the link:
https://brainly.com/question/25685654
Answer:
B- NaCl
Explanation:
if this helped could you put this as the brainiest