you should
MOL × NA(Avogadro Constant)
Mol = 4
HNO3 = 5 Atome ( 1H + 1N + 3O)
NA = 6.02 × 10* ( * = 23)
[tex]4 \times 5 \times 6.02 \times {10}^{23} = 20 \times 6.02 \times {10}^{23} = 120.4 \times {10}^{23}atom [/tex]
Answer:
2.408 x 10^24
GREETINGS!
One mole of a substance is equal to 6.02 × 10²³ units of that substance. The number 6.022 × 10²³ is known as Avogadro's number.
so if one mole of molecule is equal to that number so,
for 4 moles of [tex]HNO_{3}[/tex]= 4 x ([tex]6.02x10^{23}[/tex])
so answer is,
2.408 x 10^24
HOPE IT HELPS YOU.
-79.6 -80 -81.2. is the correct answer
In which region is the substance in both the solid phase and the liquid phase?
1 2 3 4
Answer:
its 2 on ed I promise do not listen to the brainiest
Explanation:
Answer:
B)2
Explanation:
Which landform is created by glaciers? A. sandbar B. moraine C. alluvial fan (will give brainliest to the best answer)
Answer: B: Moraine
Explanation:
Which of these elements is most likely to be a colorless gas based on the type of element? Al, Pd, Ar, Cs
Write a complete, balanced chemical equation where tin metal reacts with aqueous hydrochloric acid to produce tin(II) chloride and hydrogen gas. Include states.
From the equation, which element is oxidized, and which element is reduced?
Answer:
1. The balanced equation is given below:
Sn (s) + 2HCl (aq) –> SnCl₂ (aq) + H₂ (g)
2a. H is oxidized.
2b. Sn is reduced.
Explanation:
1. Balanced equation for the reaction between tin (Sn) metal and aqueous hydrochloric acid (HCl) to produce tin(II) chloride (SnCl₂) and hydrogen gas (H₂).
This is illustrated below:
Sn (s) + HCl (aq) –> SnCl₂ (aq) + H₂ (g)
There are 2 atoms of Cl on the right side and 1 atom on the left side. It can be balance by putting 2 in front of HCl as shown below:
Sn (s) + 2HCl (aq) –> SnCl₂ (aq) + H₂ (g)
Now, the equation is balanced
2. Determination of the element that is oxidize and reduced.
This can be obtained as follow:
We shall determine the change in oxidation number of each element.
NOTE:
a. The oxidation number of H is always +1 except in hydrides where it is –1.
b. The oxidation state of Cl is always –1.
Sn (s) + 2HCl (aq) –> SnCl₂ (aq) + H₂ (g)
For Tin (Sn):
Sn = 0
SnCl₂ = 0
Sn + 2Cl = 0
Cl = – 1
Sn + 2(–1) = 0
Sn – 2 = 0
Collect like terms
Sn = 0 + 2
Sn = +2
Therefore, the oxidation number of Tin (Sn) changes from 0 to +2
For H:
H = +1
H₂ = 0
The oxidation number of H changes from +1 to 0
For Cl:
Cl is always –1. Therefore no change.
Summary:
Element >>Change in oxidation number
Sn >>>>>>>From 0 to +2
H >>>>>>>>From +1 to 0
Cl >>>>>>>No change
Therefore,
Sn is reduced since its oxidation number increased from 0 to +2.
H is oxidized since it oxidation number reduced from +1 to 0
The balanced chemical equation for the reaction is
Sn(s) + 2HCl(aq) → SnCl₂(aq) + H₂(g)
and the element that oxidized is tin (Sn) while the element that is reduced is hydrogen (H)
The balanced chemical equation for the reaction where tin metal reacts with aqueous hydrochloric acid to produce tin(II) chloride and hydrogen gas is
Sn(s) + 2HCl(aq) → SnCl₂(aq) + H₂(g)
From the equation,
The element that is oxidized is tin (Sn), because the oxidation state of Sn increased from 0 to +2
The element that is reduced is hydrogen (H), because the oxidation state of H decreased from +1 to 0.
Hence,
The balanced chemical equation for the reaction is
Sn(s) + 2HCl(aq) → SnCl₂(aq) + H₂(g)
and the element that oxidized is tin (Sn) while the element that is reduced is hydrogen (H).
Learn more here: https://brainly.com/question/12913997
whats the lewis dot diagram for calcium
Draw the Lewis dot structure for each atom of the compound to show how many valence electrons are present in each atom. For example, the calcium atom in calcium chloride, CaCl2, has two valence electrons, and the chlorine atoms have seven valence electrons each.
Please Answer. What is the density of an object that has a mass of 13g and a volume of 25 cm3?
Answer:
The density of object is 0.52 g/cm³
Explanation:
Given data:
Density of object = ?
Mass of object = 13 g
Volume of object = 25 cm³
Solution:
Formula:
d = m/v
d = 13 g/ 25 cm³
d = 0.52 g/cm³
Thus, the density of object is 0.52 g/cm³.
how many atoms in a chair
Answer:
100 trillion atoms are in one cell and so just find how many cells are in a chair and then take 100xthe number and you get your answer
Explanation:
There are uncountable atoms which are present in a chair depending on it's size.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/30898688
#SPJ2
Which components are part of all scientific investigations? Check all that apply.
Answer:
Steps of a scientific investigation include 1. make observation
2. ask a question
3. form a hypothesis
4. test the hypothesis
5. analyze results
5 , drawing conclusions,
6. and communicating the results
The modern synthesis combined the concepts of _______ and evolution.
Ore deposits contain high amounts of
A) water
B) volcanic magma
C) metals
D) minerals
Describe what will happen to the pressure of the gas as the plunger is pushed in.
Answer:
The pressure of gas will increase.
Explanation:
The question above is related to "Boyle's Law." According to this law, provided that the temperature and amount of gas are stable, the absolute pressure of gas is inversely proportional to its volume.
In this sense, if the plunger will be pushed in, the volume of the gas will definitely decrease due to lack of space while the pressure will increase because the molecules of the gas are colliding with each other. The greater the collision, the greater the pressure. This explains the answer above.
What is true about the formation of a bond?
Answer:
There is an overall release of energy when bonds form.
Explanation:
There is a general release of energy when bonds form. This energy is called bond energy.
Bond energy is involved in the breakdown or formation of one or more bonds between atoms of a molecule. Atoms bond with each other to achieve their electronic stability, that is, they move from a higher energy situation to a lower energy one. With this we can state that when the bond between atoms is formed, energy is released; therefore, its breakdown depends on energy absorption.
explain the effect of temperature, pressure, volume and concentration reaction rate
When you increase the pressure, the molecules have less space in which they can move. That greater density of molecules increases the number of collisions. When you decrease the pressure, molecules don't hit each other as often and the rate of reaction decreases. Pressure is also related to concentration and volume.
PLEASE MARK ME AS BRAINLIEST
A student drops a 95g object into a graduated cylindor that has 30ml of water in it. After the object is added to the cylinder the water level reads 63ml. What is the density of the object?
Answer:
The answer is 2.88 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question
mass = 95g
volume = final volume of water - initial volume of water
volume = 63 - 30 = 33 mL
We have
[tex]density = \frac{95}{33} \\ = 2.87878787...[/tex]
We have the final answer as
2.88 g/mLHope this helps you
How much space does 2 x 10^22 atoms of copper take up?
Answer:
2.35mL
Explanation:
The amount of space a substance holds is its volume.
Density = mass (g) /volume (L)
Where;
mole = mass/molar mass
Since 1 mol of Cu contains 6.022 × 10^22 atoms.
There are 2 x 10^22/6.022 × 10^22 moles in 2 x 10^22 atoms of copper
2 x 10^22/6.022 × 10^22
2/6.022 × 10^(22-22)
0.332 × 10^0
0.332mol
Mole = mass/molar mass
0.332 = mass/63.5
mass = 63.5 × 0.332
mass = 21.08g
Density = mass/volume
Density of copper (Cu) is 8.96 g/cm³
8.96 = 21.08/v
V = 21.08/8.96
V = 2.35mL or cm³
Chromium-48 decays. After 6 half-lives, what fraction of the original nuclei
would remain?
Answer:
The fraction of original nuclei remaining is 1.5625
Explanation:
2. Ultraviolet radiation has a frequency of 6.8 x 10'5Hz. Calculate the energy, in
joules, of the photon.
Answer:
[tex]E=4.5\times 10^{-18}\ J[/tex]
Explanation:
It is given that, the frequency of Ultraviolet radiation is [tex]6.8\times 10^{15}\ Hz[/tex]
We need to find the energy of the photon. The formula for the energy of a photon is given by :
[tex]E=hf\\\\\text{Where h is Planck's constant}\\\\E=6.63\times 10^{-34}\times 6.8\times 10^{15}\\\\E=4.5\times 10^{-18}\ J[/tex]
So, the energy of the photon is [tex]4.5\times 10^{-18}\ J[/tex].
Pls help I need it ASAP!!!
Answer:
B
Explanation:
because water has the always has the same volume but it can change shape of the glass or container that it is put in
The letters ROYGBIV represent the colors of visible light. Arrange them in order of:
Increasing energy
Which best explains what happens during crossing over?
The chromosomes have electrical connections that allow them to line up randomly.
Paired chromosomes overlap and portions of DNA switch between chromosome.
Genetic material is switched because the chromosomes line up independently.
Chromosomes line up randomly and cross genetic information between unpaired chromosomes.
Answer:
Chromosomes line up randomly and cross genetic information between unpaired chromosomes.
Explanation:
Answer:
d.
Explanation:i took the quiz on edge 2020
Identify the reactants and products, and describe the change in energy that occurs as bonds are broken and formed.
Answer:
Chemical reactions almost always have a change in energy between products and reactants. The total energy of a system must remain the same and sometimes a chemical reaction will absorb or release energy as light, heat or both. The energy change in a chemical reaction is caused by the amount of stored energy between the products and the reactants.
Explanation:
Calculate the volume in milliliters of a 5.05-g sample of a solid with a density of 3.25 g/mL.
Answer:
The answer is 1.55 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question
mass = 5.05 g
density = 3.25 g/mL
We have
[tex]volume = \frac{5.05}{3.25} \\ = 1.5538461...[/tex]
We have the final answer as
1.55 mLHope this helps you
What are some things that uses oxygen
Answer:
Common uses of oxygen include production of steel, plastics and textiles, brazing, welding and cutting of steels and other metals, rocket propellant, oxygen therapy, and life support systems in aircraft, submarines, spaceflight and diving.
what are the units for the volume of a solid volume of a liquid
Answer:Volume is the quantity of three-dimensional space enclosed by a closed surface, for example, the space that a substance (solid, liquid, gas, or plasma) or shape occupies or contains.
Explanation:
at room temperature oxygen gas travels at 393.5 meters per second. How fast does oxygen travel in mile per hour ?
Answer:
Oxygen travels in 1,416,600
Explanation:
Which of the following presents the steps of the engineering process in the correct order?
1.Identify a need, make a plan know the background, do the work, test the results, evaluate and redesign
O
2. dentify a need, know the background, do the work, make a plan, evaluate and redesign, test the results
3. Know the background, identify a need, make a plan, evaluate and redesign, do the work, test the results
4.Identify a need, know the background, make a plan, do the work, test the results, evaluate and redesign
Answer:
4
Explanation:
I got it right
The engineering process in the correct order "Identify a need, know the background, make a plan, do the work, test the results, evaluate and redesign"
What is engineering process?At an industrial level, process engineering is just the understanding as well as application of fundamental natural principles and laws that allow people to transform raw materials along with energy into products that seem to be beneficial to society.
What is redesign?Redesign, in terms of building, is the procedure of finding a solution to such a project. this includes then writing instructions that allow such a solution to be built.
The engineering process in the correct order "Identify a need, know the background, make a plan, do the work, test the results, evaluate and redesign"
To know more about engineering process and redesign
https://brainly.com/question/10175918
#SPJ2
how many electrons does Neon-21 have?
Answer:
10 electrons
Explanation:
Neon 21 has 10 protons and 11 neutrons. We know that there are the same number of electrons as there are protons. so your answer is 10.
The density of cadmium is 8.65 g/mL, what is the volume of a 33.4 g object made of pure cadmium?
Answer:
Volume = 3.86 ml (Approx)
Explanation:
Given:
Density of cadmium = 8.65 g/ml
Mass of pure object = 33.4 g
Find:
Volume pure cadmium
Computation:
Volume = Mass / Density
Volume = 33.4 / 8.65
Volume = 3.86 ml (Approx)
Element X has two natural isotopes. The isotope with a mass of 10.012 amu (10X) has a relative abundance of 19.91%. The isotope with a mass of 11.009 ammu (11X) has a relative abundance of 80.09%. Calculate the atomic mass of this element.
Answer:
10.81
Explanation:
you can see the answer at the pic