How many grams of CaSO4 would be produced if 200 grams of Fe2O3 reacted

In a cyclic voltammogram of an irreversible electrochemical reaction, only one peak is present (either anodic or cathodic) due to the limited reversibility of the reaction.

An irreversible reaction cannot be completely reversed so when the potential of the reaction is increased, the reaction will proceed in the same direction, leading to the formation of a single peak.

The peak represents the forward reaction, either the oxidation or reduction of the species in the reaction.

The magnitude of the peak depends on the rate of the forward reaction and the degree of reversibility of the reaction.

When the potential of the reaction is increased, the reaction will move further in the same direction, and the peak will become more prominent.

The peak will reach a maximum size when the reaction reaches its equilibrium potential, which occurs when the rate of the forward and reverse reactions are equal.

The magnitude of the peak also depends on the rate of diffusion of the species in the reaction. The peak will be smaller when the rate of diffusion is slow, and it will be larger when the rate of diffusion is fast.

The shape of the peak will depend on the degree of reversibility of the reaction, with more symmetrical peaks for reversible reactions and more asymmetrical peaks for irreversible reactions.

Only one peak is present in a cyclic voltammogram of an irreversible electrochemical reaction due to the limited reversibility of the reaction.

The magnitude of the peak is determined by the rate of the forward reaction, the rate of diffusion of the species, and the degree of reversibility of the reaction.

to know more about electrochemical refer here:

https://brainly.com/question/30375518#

#SPJ11

There are 50 bananas total in the enormous bunch of bananas.

Visit for more information on a bunch of bananas.

https://brainly.com/question/28015501

#SPJ1

Answer:
To calculate the molar mass of SnCl4, we need to add the atomic masses of one tin (Sn) atom and four chlorine (Cl) atoms, each multiplied by their respective coefficients in the formula.

The atomic mass of Sn is 118.71 g/mol, and the atomic mass of Cl is 35.45 g/mol.

Therefore, the molar mass of SnCl4 can be calculated as follows:

Molar mass of SnCl4 = (1 × atomic mass of Sn) + (4 × atomic mass of Cl)

= (1 × 118.71 g/mol) + (4 × 35.45 g/mol)

= 118.71 g/mol + 141.80 g/mol

= 260.51 g/mol

So the molar mass of SnCl4 is 260.51 g/mol.

Explanation:

Answer : To prepare 3 mL of 0.24 M sucrose solution from a stock solution of 0.6 M sucrose, 1.2 mL of the stock solution and 1.8 mL of water should be used.

The amount of 0.6 Molar sucrose needed to prepare 3 mL of 0.24 Molar sucrose solution, as well as the volume of water required, can be calculated using the M1V1 = M2V2 formula. Where M1 is the molarity of the stock solution, V1 is the volume of the stock solution required, M2 is the desired molarity of the solution to be prepared, and V2 is the volume of the solution to be prepared.

Given that the stock solution of sucrose is 0.6 M, and we need to prepare 3 mL of a 0.24 M solution, we can use the formula:
0.6 M x V1 = 0.24 M x 3 mL Solving for V1:
V1 = (0.24 M x 3 mL)/0.6 M
V1 = 1.2 mL

This means that 1.2 mL of the stock solution of 0.6 M sucrose is required to prepare 3 mL of 0.24 M sucrose solution.
The volume of water required can be calculated by subtracting the volume of the stock solution from the total volume of the solution to be prepared: Volume of water = 3 mL - 1.2 mL and Volume of water = 1.8 mL

Know more about sucrose solution here:

https://brainly.com/question/3850162

#SPJ11

Answer: The type of chemical formula that tells how many atoms of each element are in a molecule but does not indicate their arrangement is a molecular formula.

What is a molecular formula?

A molecular formula is a chemical formula that displays the exact number of atoms of each element in one molecule of a compound, but it does not reveal how the atoms are arranged in a molecule.

A molecular formula is a symbolic representation of a molecule’s elements and the number of atoms of each element present in one molecule of that substance.

A molecular formula provides information about the kinds of atoms present in a molecule and the number of each kind of atom present, but it does not provide information about the structure of the molecule.

In other words, a molecular formula only tells us the number of atoms of each element present in a molecule and not their arrangement.

What is a chemical formula?

A chemical formula is a method of expressing the structure of a molecule in a short, concise form. Chemical formulas depict the number of atoms of each element in a molecule using chemical symbols, numerals, and other chemical shorthand. Chemical formulas can be used to represent both ionic and covalent compounds.

Learn more about molecular formula here:

https://brainly.com/question/28647690#

#SPJ11

The mass of [tex]Ag_2SO_4[/tex] precipitates out is 3.8975 g

We need to use the stoichiometry of the chemical reaction between [tex]AgNO_3[/tex] and [tex]Na_2SO_4[/tex] to determine how much [tex]Ag_2SO_4[/tex] will be formed. The balanced chemical equation for the reaction is:

[tex]AgNO_3 + Na_2SO_4[/tex] → [tex]Ag_2SO_4 + 2NaNO_3[/tex]

Moles of [tex]AgNO_3[/tex] = volume (in L) × molarity

                            = 0.025 L × 0.500 mol/L

                            = 0.0125 mol

Moles of [tex]Na_2SO_4[/tex] = volume (in L) × molarity

                             = 0.040 L × 0.250 mol/L

                             = 0.010 mol

The number of moles of [tex]Ag_2SO_4[/tex] formed is equal to the number of moles of [tex]AgNO_3[/tex]:

Moles of Silver nitrate ([tex]Ag_2SO_4[/tex]) = 0.0125 mol

Calculate the mass of [tex]Ag_2SO_4[/tex]:

Mass of [tex]Ag_2SO_4[/tex]= moles of [tex]Ag_2SO_4[/tex] × molar mass

Mass of [tex]Ag_2SO_4[/tex] = 0.0125 mol × 311.8 g/mol

Mass of [tex]Ag_2SO_4[/tex] = 3.8975 g

Therefore, the mass of [tex]Ag_2SO_4[/tex] formed is 3.8975 g.

Learn more about Silver nitrate: brainly.com/question/30488792

#SPJ11

The reaction between Na2S and CuSO4 goes to completion, meaning that all of the available reactants will react. Therefore, the amount of excess reactant remaining is 0 g.

To calculate the amount of each reactant remaining, we need to look at the stoichiometric coefficients of the reaction. Na2S has a coefficient of 1, while CuSO4 has a coefficient of 2. This means that for every 1 mole of Na2S, 2 moles of CuSO4 are needed. We can use the given masses of each reactant to calculate the moles present.

For Na2S: 15.5 g x (1 mol/142 g) = 0.109 mol

For CuSO4: 12.1 g x (1 mol/159 g) = 0.076 mol

Since Na2S has a coefficient of 1, 0.109 mol is the amount of Na2S remaining. However, for CuSO4 the coefficient is 2, so we need to divide 0.076 mol by 2 to get the amount of CuSO4 remaining: 0.038 mol.

Finally, we can convert back to grams to get the amount of each reactant remaining:

Na2S: 0.109 mol x (142 g/1 mol) = 15.3 g

CuSO4: 0.038 mol x (159 g/1 mol) = 6.1 g

Therefore, the amount of excess reactant remaining is 0 g, and the amount of each reactant remaining is 15.3 g of Na2S and 6.1 g of CuSO4.

Learn more about reactants here:

https://brainly.com/question/13005466#



#SPJ11

To calculate the density (in grams per milliliter) for a glass marble with a volume of 7.94 ml and a mass of 15.36 g, you must divide the mass by the volume. In this case, the density would be 1.93 g/mL.

To solve this problem mathematically:

Step 1: Identify the mass (m) and volume (v) of the marble.

Mass (m) = 15.36 g
Volume (v) = 7.94 mL

Step 2: Divide the mass by the volume to calculate the density.

Density (d) = m/v
Density (d) = 15.36 g / 7.94 mL
Density (d) = 1.93 g/mL

Therefore, the density of the glass marble is 1.93 g/mL.

For more such questions on density

https://brainly.com/question/26364788

#SPJ11

Octane can be represented in a variety of ways, depending on the type of chemistry equation being used. The most common representation of octane is C8H18.

This represents the fact that octane is a molecule composed of 8 carbon atoms and 18 hydrogen atoms.

It can also be represented as CH3(CH2)6CH3, which is the formula of octane's molecular structure - 3 carbon atoms in a row, with 6 carbon-hydrogen pairs in between.

Octane can also be represented as CH3CH2CH2CH2CH2CH2CH2CH3, which is a simplified way of writing the same molecular structure. All of these forms are correct representations of octane.

The most common way to represent octane is with the chemical formula C8H18. This chemical formula is an indication of the molecular structure of octane.

This chemical formula indicates that octane is composed of 8 carbon atoms and 18 hydrogen atoms.

These carbon and hydrogen atoms are connected together to form a molecule, with the bonds between the atoms being either single or double bonds.

Octane can also be represented as CH3(CH2)6CH3. This is a simplified version of the chemical formula C8H18, and it represents the molecular structure of octane.

The 8 carbon atoms and 18 hydrogen atoms are shown as 3 carbon atoms in a row, with 6 carbon-hydrogen pairs in between.

The hydrogen atoms are represented by the "CH2" part of the formula, while the carbon atoms are represented by the "CH3" part.

Octane can also be represented as CH3CH2CH2CH2CH2CH2CH2CH3.

This is another simplified version of the chemical formula C8H18, and it also represents the molecular structure of octane.

Each of the 8 carbon atoms is represented by the "CH3" part, while each of the 18 hydrogen atoms is represented by the "CH2" part.

This representation is often used to explain the structure of octane in a more visual way.

All of the above forms are valid representations of octane. Depending on the type of chemistry equation being used, any of the above forms can be used to represent octane.

to know more about octane refer here:

https://brainly.com/question/21268869#

#SPJ11

It helps explain why there are 4 equivalent C-H bonds in CH4,It allows for a better representation of the arrangement of electrons in the molecule, and It helps explain why the dipole moment of the molecule is zero.

Hybridization is the process of combining two or more distinct entities to create a new, unique entity that has a combination of the characteristics of the original entities. It can be used to describe a wide range of phenomena, ranging from the breeding of plants and animals to the intermixing of different cultures.

In biology, hybridization is the process of combining the genetic material of two different species to create a hybrid organism.

Learn more about hybridization here:

https://brainly.com/question/22765530

#SPJ1

Chlorine (Cl) is a nonmetal, meaning it has the tendency to gain electrons to achieve the electron configuration of a noble gas. The noble gas electron configuration of the nearest noble gas, argon (Ar), is 1s2 2s2 2p6 3s2 3p6, with a total of 18 electrons.

Chlorine has 7 valence electrons, meaning it needs 1 more electron to achieve a stable noble gas electron configuration. Therefore, chlorine wants to gain 1 electron to achieve a stable noble gas configuration.

In terms of bonding, chlorine can either gain 1 electron to form an anion with a 1- charge or it can share electrons with another atom to form a covalent bond. Chlorine most commonly forms a single covalent bond with another atom, such as hydrogen, to form hydrogen chloride (HCl). In this case, both atoms share electrons to form a stable molecule.

To know more about Chlorine refer here:

https://brainly.com/question/28440406#

#SPJ11

Answer:

yes because temperature is the moles of the initial respectively in the volume torr and 433 torr fixed the temperature heliums gas sample by 153 ml thank you

Answer:

a. 3.19 m

b. 361.45 m

Explanation:

wavelength = speed of light ÷ frequency

speed of light = 3.00 x 10^8 m/s

AM is KILOhertz

830 kHz = 830,000 Hz

FM is MEGAhertz

93.9 MHz = 93,900,000 Hz

a.

wavelength = 3.00 x 10^8 m/s ÷ 830,000 Hz =

361.45 m

b.

wavelength = 3.00 x 10^8 m/s / 93,900,000 Hz = 3.19 m

The two important quantities for [Fe(NCS)2]2- are its charge, which is -2, and its coordination number, which is 4.

Fe(NCS)22- is a coordination complex with a central iron (II) cation that is surrounded by four water molecules and four bidentate NCS– ligands. It is a red-colored complex that is commonly used to evaluate ligand reactivity and to provide an understanding of the mechanisms of substitution reactions. It is formed by the reaction of FeSO4 with NaSCN in water. The formula for Fe(NCS)22- is Fe(H2O)4(NCS)22-.

The crystal field splitting energy is a measure of the energy difference between the lower and upper d-orbitals of an octahedral complex. This energy is determined by the electronic field that is created by the ligands surrounding the central metal ion. The crystal field splitting energy is an important quantity because it affects the optical and magnetic properties of a coordination complex.

Read more about the complex :

https://brainly.com/question/28007375

#SPJ11

Elements in the same group share similar chemical structures and electron configurations, which makes them react similarly to changes in temperature.

The melting point and boiling point of elements are both important indicators of an element’s chemical and physical properties.

Elements in the same group of the periodic table typically share similar melting and boiling points due to their similar chemical properties.

The melting point of an element is the temperature at which the solid phase of the element turns into a liquid. Similarly, the boiling point is the temperature at which the liquid phase of the element turns into a gas.

The melting and boiling points of elements in the same group tend to be very close, which indicates that the elements have similar physical and chemical properties.

This is because elements in the same group share similar chemical structures and electron configurations, which makes them react similarly to changes in temperature.

By understanding the melting and boiling points of elements in a group, scientists can more accurately predict the properties of the element in different phases of matter.

to know more about elements refer here:

https://brainly.com/question/24407115#

#SPJ11

The species that should have the highest molar entropy at 298 K is CH4(g). The correct option is CH4.

Entropy is a measure of the amount of disorder or randomness in a system. In other words, it is a measure of the number of ways a system can be arranged while maintaining its energy state. It is represented by the symbol S.

The entropy of a pure crystalline substance is zero at absolute zero temperature because it has a well-defined, ordered, and rigid structure.

As temperature increases, the entropy of the substance increases because the molecules of the substance move more randomly and are distributed over a larger volume.

Entropy is highest for gases, followed by liquids and then solids. Molar entropy is a measure of the entropy of a substance per mole of the substance.

Molar entropy (S) is given by the equation:

S = ΔS/n

Where ΔS is the change in entropy and n is the number of moles of substance. At standard temperature and pressure, the molar entropy of a substance is represented by Sº.

The entropy of the given species at 298 K is as follows:

Thus, the species that should have the highest molar entropy at 298 K is CH4(g).

to know more about entropy refer here:

https://brainly.com/question/20166134#

#SPJ11

The empirical formula of the compound that produces 330 g of carbon, 69.5 g of hydrogen, and 440.4 g of oxygen upon decomposition is CHO2.

The empirical formula of a compound is the simplest whole-number ratio of atoms present in it. Follow the below steps to calculate the empirical formula of the given compound: Calculate the mass of each element present in the compound.

Calculate the mole of each element present in the compound by dividing its mass by its atomic mass. Determine the mole ratio by dividing each mole value by the smallest mole value obtained. Rearrange the ratio obtained in step 3 in the form of whole numbers. Moles of hydrogen/moles of oxygen = 69.5/27.5 = 2.53 ≈ 2.5Moles of oxygen/moles of oxygen = 27.5/27.5 = 1Therefore, the mole ratio of carbon: hydrogen: oxygen = 1: 2.5: 1Rearranging the above ratio to whole numbers, we get the mole ratio of carbon: hydrogen: oxygen as 2: 5: 2. The empirical formula of the compound is therefore CHO2.

Read more about Moles :

https://brainly.com/question/15356425

#SPJ11

To plot a theoretical distillation curve please follow the steps while we continue our discussion. Since their boiling point difference is higher it is easier to separate Cyclohexane and toluene by distillation than 1-propanol and 2-propanol.

Plot a theoretical distillation curve of temperature (y-axis) vs. volume in ml (x-axis) for a 15 ml mixture containing 60% 1-propanol and 40% 2-propanol, follow these steps:

1. Determine the boiling points of 1-propanol and 2-propanol. 1-propanol has a boiling point of 97°C, while 2-propanol has a boiling point of 82°C.

2. Calculate the volumes of each compound in the mixture. 60% of 15 ml is 9 ml (1-propanol) and 40% of 15 ml is 6 ml (2-propanol).

3. Plot the boiling points of each compound on the y-axis, and their respective volumes on the x-axis.

4. Draw a curve connecting the two points to represent the theoretical distillation curve.

To determine if 1-propanol and 2-propanol are easier to separate by distillation than cyclohexane and toluene, compare the boiling point differences between the compounds. The boiling point difference between 1-propanol and 2-propanol is 15°C (97°C - 82°C). The boiling point difference between cyclohexane and toluene is 34°C (110°C - 76°C).

Since the boiling point difference between cyclohexane and toluene is greater than that of 1-propanol and 2-propanol, it can be concluded that cyclohexane and toluene are easier to separate by distillation than 1-propanol and 2-propanol.

To know more Distillation:

https://brainly.com/question/24178852

#SPJ11

The electron configuration of valence electrons of carbon before and after sp hybridization are shown below:Before hybridization: 2s2 2p2After hybridization: sp2 2p2The orbital diagram before sp hybridization shows two electrons in the 2s orbital and two electrons in each of the 2p orbitals. After hybridization, the 2s orbital mixes with one of the 2p

orbitals to form two sp hybrid orbitals. These sp hybrid orbitals are oriented at 180° to each other, which allows maximum overlap with two 2p orbitals of the carbon atom. The remaining 2p orbital remains unhybridized and

unchanged. Therefore, the hybridized orbitals contain only one electron each and the unhybridized 2p orbital has two electrons.The boxes with arrows in the orbital diagram represent the orbitals and their electrons. The label "2s" is

dragged to the box representing the 2s orbital before hybridization. Similarly, the labels "2p" and "sp" are dragged to the boxes representing the unhybridized and hybridized orbitals after hybridization, respectively. The label "2p" is also dragged to the unhybridized 2p orbital after hybridization.

For more similar questions on hybridization

brainly.com/question/30902614

#SPJ11

One molecule of this substance has the molecular formula CH₂ClO, which is methoxychloro. to ascertain how many oxygen atoms there are in 2 molecules of methoxychloro.

To create dioxygen, or oxygen, two oxygen atoms must make a covalent double bond with one another. Typically, oxygen exists as a molecule. It has the name dioxygen.

With an electrical configuration of (2, 6) and an atomic number of 8, oxygen lacks two more electrons to complete an octet. By exchanging two pairs of electrons with another oxygen atom, the oxygen atom becomes stable. A diatomic oxygen molecule is one that contains two oxygen atoms.

To know more about oxygen atoms visit:-

brainly.com/question/14387251

#SPJ1

When adding the measurements 42. 1014 g + 190. 5 g, we get  7 significant figures. Those 7 significant figures are 2, 3, 2, 6, 0, 1 and 4.

Significant figures can be defined as the number of digits in a value which is often a measurement which contribute to the degree of accuracy of the value. We can start counting all the significant figures by starting the first non-zero digit. Significant figures of a number in positional notation are defined as digits in the number that are reliable and necessary to indicate the quantity of something. All zeros that occur between any two non zero digits are significant figures. Significant figures are known as the digits of a number which are meaningful in the terms of accuracy or in the term of precision. That involves any non-zero digits. When we are adding the measurements 42. 1014 g + 190. 5 g, the predicted 7 significant figures as it appears between the two non zero digits.

To learn more about Significant figures

https://brainly.com/question/24630099

#SPJ4

The complete question is,

When adding the measurements 42. 1014 g + 190. 5 g, the answer has ----------Significant figures.

Both elements must lose one or more electrons. In a binary ionic bond, one element donates one or more electrons to the other element, which accepts the electrons. So the correct option is B .

This results in one element becoming a cation (a positively charged ion) and the other element becoming an anion (a negatively charged ion). The attraction between the opposite charges holds the two ions together in a crystal lattice, forming an ionic bond.

For example, in the formation of sodium chloride (NaCl), sodium donates one electron to chlorine, which accepts the electron, forming Na+ and Cl- ions. The attraction between the Na+ and Cl- ions forms the ionic bond in NaCl.

Learn more about binary ionic

https://brainly.com/question/7960132

#SPJ4

The RF value of eugenol will increase if the mobile phase is changed to 40% ethyl acetate in hexanes.

This is because the polarity of ethyl acetate is higher than that of hexanes, making it a better solvent for the eugenol to dissolve in. Therefore, the RF value will increase as the compound is able to move further up the TLC plate.

To illustrate, when the eugenol is placed on a TLC plate with a mobile phase consisting of 40% ethyl acetate in hexanes, the eugenol will dissolve in the ethyl acetate and migrate towards the top of the plate.

The RF value is the distance that the solvent front has traveled, in relation to the distance traveled by the compound, so it will be higher when the compound has been able to move further up the plate.

In conclusion, the RF value of eugenol will increase when the mobile phase is changed to 40% ethyl acetate in hexanes due to the higher polarity of the ethyl acetate, allowing the compound to move further up the TLC plate.

To know more about RF value refer here:

https://brainly.com/question/31117352#

#SPJ11

The symbol for the oxygen isotope with 9 neutrons is O-16.

The atomic number of oxygen is 8, which means it has 8 protons. The mass number for oxygen-16 is 16, which refers to the total number of particles in the nucleus (8 protons + 8 neutrons). The element symbol for oxygen is O.

Isotopes are atoms that have the same number of protons but different numbers of neutrons.

Oxygen-16 has a total of 9 neutrons, meaning it has one more neutron than the most common isotope of oxygen (oxygen-15, with 8 neutrons).

Due to the difference in neutron numbers, the atomic mass of oxygen-16 is slightly larger than oxygen-15.

Atomic mass is the combined mass of all of the protons and neutrons in an atom's nucleus. In oxygen-16, the protons and neutrons have a combined mass of 16, hence the mass number of 16.

Oxygen-16 is an important isotope because it is present in significant amounts in the Earth's atmosphere and is used in numerous medical and scientific applications.

to know more about isotope refer here:

https://brainly.com/question/11680817#

#SPJ11

using many methods I gess I am not good at drawing

Magnesium carbonate breaks down into solid magnesium (MgO) & gaseous carbon dioxide in the aforementioned mechanism, which is a chemical property (CO2).

In these equations, chemical reactions are represented by chemical formulae and symbols. Chemical equations have two sides: the reactants are on the left, and the products are on the right.

Chemical equations represent the transformation of reactants into products in this process. Take the combination of iron (Fe) with sulfur (S) to create iron sulfide as an example. Fe(s) = S(s) + FeS (s) Iron and sulfur react, as indicated by the plus symbol.

To know more about Chemical equation visit:

https://brainly.com/question/30087623

#SPJ1

The property that affects a substance's saturation temperature is Pressure.

Saturation temperature is the temperature at which a liquid and a gas have the same vapor pressure. The vapor pressure of a liquid is affected by temperature, and at the saturation temperature, the vapor pressure of the liquid equals the pressure of the surrounding atmosphere.

A substance's saturation temperature is influenced by several variables. Pressure is one of the variables that influences the saturation temperature of a substance. When the pressure surrounding a substance rises, its saturation temperature rises.

Read more about mass:

https://brainly.com/question/19385703

#SPJ11

The elimination reaction is different from the substitution reaction because in the elimination reaction, two substituents are removed from a molecule to form a double bond or a ring.

In contrast, substitution reactions involve one substituent being replaced by another.In order to determine whether an elimination or substitution reaction will occur, the nature of the reactants and reaction conditions must be considered.

Factors such as the presence of a strong base, the leaving group ability of the substituent, and steric hindrance can all influence the outcome of a reaction.

For example, if a primary alkyl halide is reacted with a strong base such as sodium hydroxide in a polar solvent, an elimination reaction will likely occur due to the poor leaving group ability of the primary alkyl halide.

However, if a secondary or tertiary alkyl halide is reacted under the same conditions, a substitution reaction will likely occur due to the increased stability of the carbocation intermediate.There are exceptions to these general rules, such as the reaction between 2-methyl-2-butanol and hydrogen bromide.

In this case, the reaction can proceed through either an elimination or substitution pathway depending on the reaction conditions. Overall, the outcome of a reaction depends on a variety of factors and must be analyzed on a case-by-case basis.

To know more about elimination reaction click on below link:

https://brainly.com/question/29695970#

#SPJ11

After 0.100 s, the average rate of reaction over the first 100 milliseconds is 0.25 mol s^-1. if the initial concentration of n2 was 0.400 m and the concentration of n2 was 0.350 m.

The average rate of reaction over the first 100 milliseconds when the initial concentration of N2 was 0.400 M and the concentration of N2 was 0.350 M after 0.100 s can be calculated as follows:

Average rate of reaction = {N2 consumed or produced in mol} / {time in seconds}

The balanced chemical equation for the reaction is:

N2(g) + 3H2(g) → 2NH3(g)

As per the given equation, one mole of N2 reacts to produce two moles of NH3. So, the mole of N2 consumed in the reaction would be equal to half the mole of NH3 produced.

Therefore, mole of N2 consumed = (1/2) × (0.050 M) = 0.025 M

Now, the average rate of reaction can be calculated as follows:

Average rate of reaction = {N2 consumed or produced in mol} / {time in seconds}

= 0.025 mol / 0.100 s

= 0.25 mol s^-1

Therefore, the average rate of reaction over the first 100 milliseconds is 0.25 mol s^-1.

For more such questions on rate of reaction , Visit:

https://brainly.com/question/24795637

#SPJ11

The freezing point of a 0.1m solution is determined by its solute concentration, and the type of solute affects the freezing point and it will be Catechin.

The lowest freezing point will be found in the solution with the lowest solute concentration.

In this case, catechin has the lowest solute concentration of 0.001 mol/L, so it will have the lowest freezing point.

The freezing point of a solution is also affected by the type of solute present.

Magnesium chloride (MgCl2) and sucrose both have high molecular weights, and therefore will decrease the freezing point more than catechin. Therefore, catechin will still have the lowest freezing point.

The freezing point of a solution can also be affected by the presence of electrolytes.

Magnesium chloride is an electrolyte, which means it will dissociate in water and lower the freezing point more than catechin or sucrose. Therefore, catechin still has the lowest freezing point.

In summary, catechin has the lowest freezing point of the three solutions (MgCl2, catechin, and sucrose) because it has the lowest solute concentration and does not contain any electrolytes.

To know more about Catechin, refer here:

https://brainly.com/question/29996352#

#SPJ11