Answer:
Molar volume at STP can be used to convert from moles to gas volume and from gas volume to moles. The equality of 1 mole = 22.4 L is the basis for the conversion factor.
Explanation:
The drummer is the best performer. What is the noun in this sentence
Answer:
Performer if not I say drummer
let me know the answer!
Explanation:
Which are included in the inflammatory response? Select three options.painswellingantibodiesmucusredness
What is the molarity of a 75.0 mL solution that contains 0.225 g of
potassium nitrate?
Answer:
M=0.0297M
Explanation:
we know that molarity equals number of mole of solute over the volume of solution.
M=n/V but n=m/M
n=0.225g÷101g/mol =0.00223mol
M=0.00223mol/0.075l
M=0.0297M
Answer:
0.0297M
Explanation:
We will use the formula M= moles of solute/lites of solution.
First we need to figure out the Moles of the solute, to get this we first need the molar mass of KNO3 (potassimum nitrate).
The Molar Mass of potassimum nitrate is 101.103 g/mol
K - 1 x 39.09
N - 1 x 14.006
O - 3 x 15.999
KNO3 - 101.103 g/mol
Now we get the moles of the solute by doing.
0225g/ 101.103g/mol = 0.00223 mol
Put the answer into the orginal equation to get 0.00223mol / 0.045 L
Which equals to 0.0297M. This is also the correct amount of significant figures.
H2O decomposes to hydrogen and oxygen as describe in the
following reaction:
2H20 (1) ► 2H2 (9) + O2 (9)
What is the mole fraction of hydrogen gas in the products?
a 0.5
b 0.33
C 0.4
d 0.67
A student is asked to describe three random
elements found on the periodic table. All three
elements will FOR SURE have which of the two
following characteristics?
A. similar color and texture
B. shininess and value
C. mass and volume
D. similar boiling and freezing points
All three elements in the periodic table will for sure have characteristic of mass and volume.
What is an element?
An element is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom which is characteristic of it's own. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.
Learn more about element,here:
https://brainly.com/question/14347616
#SPJ2
What is the formula for atomic weight amu of neon
Answer:
abundance of the first isotope times the Mass of the first isotope
Can someone help me with this please
That is an ionic bond.
Explanation:
It has cations and anions
11.
What is the missing product from this reaction?
32 32
15P → 16S +
a.
4.
2 He
b.
0
10
C.
0
or
d.
0
le
e.
0
1P
Answer:
good times
Explanation:
always nedded
Here the nuclear decay of phosphorous to give S-32 is an example of beta-decay. Hence, the emitted particle is an electron. Thus, option b is correct.
What is beta decay ?The heavy unstable radioactive isotopes undergo nuclear decay by the emission of alpha or beta particle. Thus, there are mostly two types of decays, alpha decay and beta decay.
In alpha decay, the isotope emits a helium nuclei. Hence, mass number decreases by 4 units and atomic number decreases by 2 units. In beta decay, mass number does not change but atomic number increases by 1.
Here, P-32 undergo beta -decay by emitting an electron to form S -32. Hence, atomic number is increased by one. Therefore, the mission product is an electron option b.
Find more on beta- decay:
https://brainly.com/question/12448836
#SPJ6
Polyester is a synthetic material used for many different purposes. It is produced from petroleum and natural gas. Producing polyester from these natural resources requires many steps and uses other chemicals that are potentially harmful. Polyester production also requires a lot of energy. Although polyester is not biodegradable, it is easily recyclable.
Which statement about synthetic materials is best supported by the example of polyester?
A.
Using synthetic materials has a negative impact on the environment, but using natural materials does not.
B.
Synthetic materials created from petroleum and natural gas are difficult to produce and to recycle.
C.
Materials that are created from natural resources affect the environment more than those that are not.
D.
Producing certain synthetic materials could have a greater environmental impact than disposing of them.
Answer:
A. Producing certain synthetic materials could have a greater environmental impact than disposing of them.
Explanation
I just did this question and got it right.
10 facts about “molecules”
Answer:
Explanation:
A perfect diamond is a single molecule made of carbon atoms.
DNA is a super long molecule that has information uniquely describing every human being.
When two or more atoms chemically bond together, they form a molecule.
They are very small in size.
They have space between them.
They are in constant random motion.
molecules move when Particles move rapidly in all directions but collide with each other more frequently than in gases due to shorter distances between particles.
In 1926, French physicist Jean Perrin received the Nobel Prize in physics for proving, conclusively, the existence of molecules.
Molecules can exist in free state because they are very stable.
The smallest particle of a compound capable of existing on its own is a Molecule-not a atom.
1. Explain the difference between genetic, environmental, social, and pathogenic factors.
2. How do pathogens spread?
3. How can we, as humans, prevent transmission of pathogens?
4. List three ways the environment can affect personal health.
1. Genetic factors are those where the genetic condition of an individual is capable of increasing the probability of developing certain diseases.
Environmental factors include the diversity of environmental stresses such as population density, temperature, food and pollutants that impact human health.
Social factors are related to the interaction of groups through culture, social class and family structure, which also have an effect on population health.
Pathogenic factors, on the other hand, are those transmitted by agents such as viruses, fungi, bacteria and protozoa, which colonize a host by adhering to cells and evading immunity, generating diseases.
2. The transmission of pathogens can occur in several ways, such as contact with bodily fluids from infected people, cross-transmission or through being spread through particles in the air.
3. We can prevent the transmission of pathogens through proper hygiene habits, healthy eating, vaccination against infectious diseases and avoid contact with other people if you have a communicable disease.
4. The environment can affect personal health through climate change, pollution and lack of infrastructure that lead to less access to quality food and basic health conditions.
Learn more here:
https://brainly.com/question/13179079
Balance the following equation: __Na+__H₂O ➞ __NaOH+__H₂ *
Answer:
4 4 8 4 is the balanced equation
Page. 5. What is the position of alkali metals in the Modern periodec table.
What is the position of alkali metals in the Modern periodic table.
Answer:-They are placed in the IA group, which is the first column on the left side of the periodic table.
Explanation:-Alkali metals are placed on the first column (IA)
(lithium, sodium, potassium, rubidium, cesium, francium)
what is the difference between hypertonic and hypotonic
Ores contain enough metal to make extraction of the metal ______
economical.
reversible.
carbon neutral.
Answer:
oxide
Explanation:
What is the volume, in liters, of 1.4 moles of CO2 gas at STP?
Answer:
22.4 L.
Explanation:
copper cannot be used as an anode in electrolysis of water
Answer:
I hope this will help
Explanation:
Copper is purified by electrolysis . Electricity is passed through solutions containing copper compounds, such as copper(II) sulfate. The anode (positive electrode ) is made from impure copper and the cathode (negative electrode) is made from pure copper.
The MSDS for propane gives it a health rating of 1, a flammability rating of 4, and a reactivity rating of 0. According to the MSDS, which best describes propane? highly corrosive highly toxic highly flammable highly reactive.
Propane has MSDS rating for flammability 4, thus the compound has been highly flammable. Thus, option C is correct.
The MSDS has been the Material Safety Data Sheet . It has been given for the compounds hazardous levels. The compounds have been checked on various parameters and ranked on the scale of 0 to 4.
The compounds being less value in the parameter has 0 value, while 4 has been the maximum value.
The MSDS rating for propane has been able to deliver the compound to be:
Health rating: 1The compound has been less positive towards the health.
Flammability: 4The compound has been highly flammable.
Reactivity: 0The compound has been least reactive.
Since, propane has MSDS rating 4 for flammability, the compound has been highly flammable. Thus, option C is correct.
For more information about the MSDS rating, refer to the link:
https://brainly.com/question/2852656
Answer:A) Highly corrosive but not highly flammable
Explanation:
right on edge :)
How quickly the electron are moving through the circuit
A.Resistance
B.voltage
C.current
2.The strength with which electrons are pushed through the circuit?
A.Resistance
B.voltage
Current
Answer:
B
Explanation:
because the electrons are moving fast
How many total atoms are present in the compound: Mg(OH)_2
Answer:
In the compond Mg(OH)_2, 20 atoms are present.
Explanation:
4. Pb + FeSO4 → PbSO4 + Fe
what type of reaction?
Oxidation- Reduction reaction
Crumpling and tearing cause physical changes to a piece of paper.
Which two characteristics of the paper change?
A. Size
B. Reactivity
I C. Identity
I D. Shape
Please help I’ll give brainlist and no spamming or links just please help
size and shape. only the appearance of the paper will have changed, but is reversible.
how many neutrons of atomic mass is 31 and atomic number is 12
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
As we know, Number of protons = Atomic Number
So,
Number of protons = 12And, Atomic mass = Number of protons + Number of Neutrons (N)
therefore ~
31 = 12 + N N = 31 - 12 N = 19Number of Neutrons = 19
Can anyone pls answerrrrt
Answer:
wdym
Explanation:
hmm
How many atoms are in 80.45 g of magnesium with explanation
Answer:
There are 1.9926 * 10 ^24 atoms.
Explanation:
M ( Mg ) = 80.45 g
We can find the molar mass of magnesium in the Periodic table:
M ( Mg ) = 24.31 g / mole
n = 80.45 g : 24.31 g/mole = 3.31 moles
N a ( Avogadro`s constant ) = 6.02 * 10 ^23
N = Na * n = 6.02 * 10 ^24 * 3.31 = 19.926 * 10 ^23
helllloooook this makes no sense help me plz
may i ask?
How do you use this app?
[EARTH SCIENCE]
Hi, can anyone help please? Thank uuuu!!! :D
The relationship between the average distance of a planet from the sun and the planet’s orbital period is described by the....
A. Law of ellipses.
B. Law of equal areas.
C. Law of motion.
D. Law of periods.
Answer:
c. law of motion
Explanation:
I think I hope it helps
How do you prepare 500ml of 1.77M H2SO4 solution from an 18.0M H2SO4 Stock solution
Answer:
Take 49.2-ml of 18.0 M H2SO4 stock solution and pour it into a 500-ml volumetric flask. Fill to the 500-ml line with distilled water to make 1.77M H2SO4 solution.
Explanation:
use the formula M1V1=M2V2
volume must be in liters(L)
[tex](1.77)(500 \times {10}^{ - 3} ) = (18)v2 \\ 0.885 = 18v2 \\ v2 = \frac{0.885}{18} \\ v2 = 0.04916[/tex]
0.04916L × 1000 = 49.16 ml = 49.2 ml
Desperate Please Hurry
What was the evidence that Earth was round before there were photos from space?
Answer:
Explanation:
Are there any awnser choices?
Which answer is it for number 7
Answer:
The answer is I
The 4 one represents Solids coz in solids atoms are tightly packed