Answer:
he balanced chemical equation for the reaction between NaN3 and Na2O is:
2 NaN3(s) → 2 Na(s) + 3 N2(g)
According to the stoichiometry of this equation, 2 moles of NaN3 will produce 2 moles of Na, which in turn will react with 3 moles of N2. Therefore, the volume of N2 gas produced is proportional to the volume of NaN3 used.
To find the volume of NaN3 required to produce 14.7 liters of N2, we need to use the ideal gas law:
PV = nRT
where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the gas constant, and T is the temperature of the gas.
Assuming standard temperature and pressure (STP), which is 0°C and 1 atmosphere, we can simplify the equation to:
V = n/22.4
where V is the volume of the gas in liters and n is the number of moles of the gas.
We can use this equation to convert the volume of N2 to moles:
n = PV/RT = (1 atm)(14.7 L)/(0.08206 L·atm/mol·K)(273 K) = 0.608 mol
According to the stoichiometry of the balanced equation, 2 moles of NaN3 will produce 0.608 mol of N2. Therefore, the number of moles of NaN3 required is:
n(NaN3) = 2 × n(N2) = 2 × 0.608 mol = 1.216 mol
Finally, we can use the molar volume of a gas at STP to convert the number of moles to volume:
V(NaN3) = n(NaN3)/22.4 = 1.216 mol/22.4 L/mol = 0.054 L
Therefore, 0.054 liters of NaN3 are required to produce 14.7 liters of Na2O.
Which of the following represents the greatest pressure?
O 0.625 atm
O 755 mmHg
O 15.10 PSI
O 90,250 Pa
The highest pressure, or 1.04 atm, or 15.10 PSI, is present.
What pressure level in Pa is high pressure?High pressure is often characterized by a barometer measurement of over 30.20 inHg and is linked to calm, clear skies. Above 30.20 inHg (102268.9 Pa or 1022.689 mb) indicates rising or stable pressure, which indicates continuous pleasant weather. Fair weather is a sign of slowly decreasing pressure.
0.625 atm
755 mmHg = 1 atm (by definition)
15.10 PSI = 1.04 atm (1 PSI = 0.068 atm)
90,250 Pa = 0.89 atm (1 Pa = 9.87x10^-6 atm)
Therefore, the greatest pressure is 1.04 atm, which corresponds to 15.10 PSI.
To know more about pressure visit:-
https://brainly.com/question/2773779
#SPJ1
Which of the following is true for the quantum mechanical atomic model?
A. Atoms absorb or emit electrons from the nucleus when they interact with electromagnetic radiation.
B. Every atom absorbs all wavelengths of light energy or electromagnetic radiation.
C. Electrons give off electromagnetic radiation when they jump from a high to a low energy level.
D. Electrons are perfectly evenly distributed throughout the atom.
Answer: C. Electrons give off electromagnetic radiation when they jump from a high to a low energy level.
Explanation:
Electrons give off electromagnetic radiation when they jump from a high to a low energy level in the quantum mechanical atomic model. This is known as the emission spectrum of an atom, and each element has its unique emission spectrum. This phenomenon was explained by the Bohr model of the atom and is a fundamental concept of the quantum mechanical atomic model.
Option A is incorrect because atoms cannot absorb or emit electrons from the nucleus when they interact with electromagnetic radiation. Option B is also incorrect because atoms only absorb certain wavelengths of light energy or electromagnetic radiation, which corresponds to the energy difference between electron energy levels. Option D is incorrect because electrons are not evenly distributed throughout the atom in the quantum mechanical atomic model; instead, they occupy specific energy levels or orbitals.
You complete an experiment measuring the spread of the Cordyceps fungus across a forest environment. You measure the amount of growths you observe on the ground in a 1 acre area. After evaluating your experiment, you find that fungus frequently grows long fibers underground and only sprout reproductive parts above ground. How might this affect your data and/or conclusion?
The experiment's initial result was incorrect since the statistics do not account for subsurface growth, which may have expanded over a greater area.
What is a straightforward experiment?Researchers frequently employ a straightforward experiment to establish cause-and-effect, or to ascertain if modifications to one factor might result in changes in another one.
What experiments carry out chemists?At the molecular and atomic levels, chemists examine the properties of materials. They quantify amounts and reaction rates in hopes of understanding unfamiliar compounds and how they function. When creating new chemicals for application in a variety of real-world situations, they may additionally measure these parameters.
To know more about experiment's visit:
https://brainly.com/question/30055326
#SPJ1
Humanity faces major global challenges today which can be addressed through the engineering of major technological systems. Engineers continuously modify these technological systems by applying scientific knowledge and engineering design practices to increase benefits while decreasing costs and risks. These modifications and innovations lead to new types of energy solutions.
Using the knowledge you have built over this unit so far, how do you think the United States should be creating energy?
Include the type or types of energy sources you choose (2pts)
Justify your reasoning for why your chosen type is beneficial (2 pts)
Use complete sentences and a persuasive voice. (1 pt)
This should be a paragraph long (3-6 sentences)
Answer:
Based on the current state of technology and the environmental concerns, the United States should be heavily investing in solar and wind energy sources to create energy. Solar and wind power are renewable and environmentally friendly sources of energy that can provide a sustainable solution to the energy crisis. Unlike fossil fuels, solar and wind energy do not produce harmful greenhouse gases or contribute to climate change. They also have a lower risk of environmental disasters than nuclear power or oil spills from offshore drilling. Solar and wind power are also becoming increasingly cost-effective, and their prices are continuously dropping, making them more accessible and affordable to consumers. Investing in solar and wind energy can lead to job creation, energy independence, and a more sustainable future for the United States. Therefore, the United States should prioritize the adoption of solar and wind energy to meet the increasing demand for energy while mitigating the negative impacts of traditional energy sources.
2CuCl + H2S → Cu2S + 2HCl
How many moles of copper I chloride, CuCl, are necessary to react completely with 4.4 moles of hydrogen sulfide, H2S?
The correct answer is that for 4.4 moles of H2S to completely react, 8.8 moles of CuCl are needed.
What is a mole?The mole is the unit for amount of substance. It is referred to as mol. The amount of material, or 1 mol, has the same number of atoms as 12.0 g of carbon-12. Since atoms are so tiny and have such a tiny mass, there are a tremendous amount of atoms in 12.0 g of carbon-12.
What, in plain terms, is a mole?Chemists employ the mole, a very significant unit of measurement. Like a dozen eggs means twelve eggs, having a mole of anything indicates you have 602,214,076,000,000,000,000,000 of that thing. For extremely small objects like atoms, molecules, or other particles, chemists must quantify using moles.
To know more about moles visit-
https://brainly.com/question/30564951
#SPJ1
how much ice can be melted with 560 joules of heat?
The amount of ice that can be melted by a given amount of heat depends on several factors, such as the mass of the ice, the specific heat capacity of ice, and the heat of fusion of ice (the amount of heat required to melt a given mass of ice at its melting point).
Assuming that the ice is at its melting point (0°C or 32°F) and that the heat is used solely to melt the ice (not to raise its temperature), we can use the heat of fusion of ice and the equation:
Q = m * L
where Q is the heat required to melt the ice, m is the mass of the ice, and L is the heat of fusion of ice (334 J/g).
To find the mass of ice that can be melted with 560 J of heat, we can rearrange the equation to solve for m:
m = Q / L
m = 560 J / 334 J/g
m = 1.67 g
Therefore, 560 joules of heat can melt 1.67 grams of ice at its melting point.
Answer:
The amount of ice that can be melted with a certain amount of heat depends on several factors such as the mass of the ice, the initial temperature of the ice, and the specific heat capacity of ice.
However, assuming we are dealing with a certain amount of ice with a specific mass and initial temperature, we can use the following formula:
Q = m × Lf
where Q is the amount of heat required to melt the ice, m is the mass of the ice, and Lf is the heat of fusion of ice, which is equal to 334 joules/gram.
To find the amount of ice that can be melted with 560 joules of heat, we need to rearrange the formula as:
m = Q ÷ Lf
Plugging in the values, we get:
m = 560 J ÷ 334 J/g ≈ 1.67 g
Therefore, 560 joules of heat can melt approximately 1.67 grams of ice.
Question 2 (10 points)
A hypothetical bird species is purple due to a purple pigment in their feathers. A random mutation in the gene that codes for the purple pigment protein results in one individual white bird.
A
Explain the connection between genes, proteins and traits using this example. Make sure you explain each step. What is the name of the dogma that explains this connection?
Answer:
Genes are segments of DNA that contain instructions for the production of specific proteins. Proteins are the molecules that perform various functions in cells and organisms, such as providing structural support, transporting molecules, and catalyzing chemical reactions.
In the case of the hypothetical bird species, the gene that codes for the purple pigment protein is responsible for producing the purple pigment in the bird's feathers. When a random mutation occurs in this gene, it can affect the production of the pigment protein. In the case of the white bird, the mutation likely results in a non-functional protein that cannot produce the purple pigment, resulting in white feathers.
This process of genes producing proteins, which in turn determine the traits of an organism, is known as the central dogma of molecular biology. The central dogma states that genetic information flows from DNA to RNA to protein, and that the sequence of nucleotides in DNA determines the sequence of amino acids in proteins, which in turn determine the structure and function of the protein and ultimately the traits of the organism.
Explanation:
How many grams are there in 6 moles of water??
Answer:108.06 grams
Explanation: the first step is to use unit conversions. Multiply the given number of moles by the molar mass of water which is 15.99 grams of oxygen plus 2.02 grams for two hydrogen that will turn it into grams and that will give you your total number of grams.
2NaClO3 → 2NaCl + 3O2
How many moles of oxygen gas are produced when 7.3 moles of sodium chlorate, NaClO3, decomposes?
Answer:
2NaClO3 → 2NaCl + 3O2
It can be seen that 2 moles of NaClO3 produce 3 moles of O2.
Therefore, to find out how many moles of O2 are produced when 7.3 moles of NaClO3 decompose, we can set up a proportion:
2 mol NaClO3 / 3 mol O2 = 7.3 mol NaClO3 / x mol O2
Cross-multiplying, we get:
2 mol NaClO3 * x mol O2 = 3 mol O2 * 7.3 mol NaClO3
Simplifying:
x mol O2 = (3 mol O2 * 7.3 mol NaClO3) / 2 mol NaClO3
x mol O2 = 10.95 mol O2
Therefore, 10.95 moles of oxygen gas are produced when 7.3 moles of sodium chlorate decomposes.
Explanation:
Neurological differences in singing
alone or with others
Alone on the left, and with others on the right. Welsh, 2015.
Which of the following conclusions can be drawn from the brain scan images?
SOBRE
Singing alone is less fun than singing with others.
Singing with others activates more regions of the brain.
Singing alone activates more regions of the brain.
Singing alone is a requirement of singing with others.
Which of the following is evident in the brain scans?
0000
There is no difference in brain activity when singing alone or singing with others.
Singing with others is an important task.
Singing alone and singing with others activate different parts of the brain.
Loud music activates the most parts of the brain.?
1) Singing alone is less fun than singing with others
2) Loud music activates the most parts of the brain
Can a brain scan during singing show important information?Brain scans during singing can provide important information about the neural processes involved in music and vocalization.
Brain scans during singing can help researchers understand how these different brain regions interact and coordinate during vocalization. For example, studies have shown that professional singers have greater activation in the motor cortex and auditory cortex compared to non-singers, suggesting that extensive training can lead to changes in the brain's neural circuits.
Learn more about brain scan:https://brainly.com/question/29439731
#SPJ1
Zn + 2HCl → ZnCl2 + H2
How many moles of hydrogen are produced from the reaction of 2.3 moles of zinc?
Answer:
3 moles
Explanation:
Based on the balanced chemical equation, 1 mole of H2 is formed when 1 mole of Zn reacts with excess HCl. As such, 3 moles of H2 are formed when 3 moles of Zn react with excess HCl.
The acid-dissociation constant, Ka, for benzoic acid is 6.5 × 10-5. Which will you use to calculate the base-dissociation constant, Kb, for the conjugate base of benzoic acid?
Therefore, the value we will use to calculate the base-dissociation constant, Kb, for the conjugate base of benzoic acid is 1.54 × 10⁻¹⁰.
What is base-dissociation constant?The base dissociation constant, Kb, is a measure of the strength of a base in solution. It is the equilibrium constant for the reaction of a base with water to form the conjugate acid and hydroxide ion: B + H2O ⇌ BH+ + OH-. The Kb value is calculated by dividing the equilibrium constant for this reaction by the concentration of the conjugate acid and the concentration of hydroxide ion at equilibrium. Kb = [BH+][OH-] / [B] The Kb value can range from very small values (for weak bases) to very large values (for strong bases). The larger the value of Kb, the stronger the base. The Kb value is related to the acid-dissociation constant, Ka, for the conjugate acid of the base by the following relationship:
Kw = Ka × Kb
The Kb value is an important parameter in acid-base chemistry and is used to predict the degree of base ionization in solution, to calculate pH of basic solutions, and to determine the strength of bases in organic chemistry.
Here,
To calculate the base-dissociation constant, Kb, for the conjugate base of benzoic acid, we need to use the relationship between the acid-dissociation constant, Ka, and the base-dissociation constant, Kb, for a conjugate acid-base pair. The relationship is given by the following equation:
Ka × Kb = Kw
where Kw is the ion product constant for water, which is equal to 1.0 × 10⁻¹⁴ at 25°C.
Since we know the value of Ka for benzoic acid, which is 6.5 × 10^-5, we can use this equation to calculate the value of Kb for the conjugate base of benzoic acid:
Ka × Kb = Kw
Kb = Kw / Ka
Kb = 1.0 × 10⁻¹⁴ / 6.5 × 10⁻⁵
Kb = 1.54 × 10⁻¹⁰
To know more about base-dissociation constant,
https://brainly.com/question/28197409
#SPJ9
1
1. A neutral atom of an element has 2 electrons in the first energy level, 8 in the second energy level and 8 in the third energy level. This information does not necessarily tell us:
(a) the atomic number of the element.
(b) anything about the element's chemical properties.
(c) the total number of electrons in s orbitals.
(d) the total number of electrons in p orbitals.
(e) the number of neutrons in the nucleus of an atom of the element
Answer: (e) the number of neutrons in the nucleus of an atom of the element
Explanation: The given information tells us how many electrons the atom has, and since the atom is neutral then the atomic number is the same as the total number of electrons. This rules out answer a. It also tells us that the element has a full set of valence electrons, making it a noble gas and ruling out answer b because noble gasses are known to act differently to other elements. c is ruled out because we are given the number of electrons, allowing us to figure out how many electrons are in s orbitals. The same goes for option d. This leaves option e. e is the correct answer because the number of neutrons in the nucleus of an atom does not affect the number of electrons or the charge of the atom, meaning we have no way of finding it.
How many atoms of oxygen are present in 200.0 g of CaCO3 ?
Explanation:
firstly we find the mole of CaCO3 . Now, in CaCO3 1 mol CaCO3 contains 3 mol O . Hence, 36.138*10^23 atoms of oxygen are present in 200 g of caco3.
Strong acids and bases have minimal effects on pH, while weak acids and bases can have a large impact on pH.
True or False
Stronger acids have lower pH values than weaker acids because they have more ions in solution. As a result, the statement "A strong acid solution always has a lower pH than a mild acid solution" is accurate.
Can a weak acid's pH ever be lower than a strong acid's?A weak acid should have a pH of less than 7 (not neutral), and its pH is often lower than that of a strong acid. Note that there are a few.
Does the pH of strong bases change?Strong bases and strong acids do not hydrolyze the salts they produce. The pH will stay at 7 and be neutral.
To know more about strong acid visit:-
brainly.com/question/16749233
#SPJ1
12. The molecules in a material need to move with more energy for the material to change from a
A. liquid to a gas.
B. gas to a liquid.
C. liquid to a solid.
D. gas to a solid.
Answer:
A) liquid to a gas
Explanation:
When molecular motion increases, the space between molecules increases, and when it decreases, the space between molecules decreases. It requires energy for a solid to melt into a liquid, and once a liquid is changing state to a gas, potential energy is increasing during that phase change.
calculate the number molecules of water present in a snowball that weighs 360 grams
360 g of water is equal to 1.20441025 molecules and 20 moles.[tex]1.2 * 10^2^4[/tex]molecules make up 36g of water.
How do you measure 250ml of water?8.45 fluid ounces, or just over 1 cup, of water are equal to 250 millilitres of water. This is because 250 millilitres would be little more than 1 cup as 1 cup is approximately 236 millilitres.
How are water molecules calculated?We may determine the atomic weights of the elements using their periodic tables, and we discover that hydrogen has an atomic weight of 1, while that of oxygen is 16. We sum the contributions from each atom to determine the molecular weight of one water molecule, which is 2(1) + 1(16) = 18 grams/mole.
To know more about molecules visit:-
brainly.com/question/21263612
#SPJ1
Liquid octane CH3CH26CH3 reacts with gaseous oxygen gas O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. If 29.2g of carbon dioxide is produced from the reaction of 20.6g of octane and 98.6g of oxygen gas, calculate the percent yield of carbon dioxide. Round your answer to 3 significant figures.
Now, we can calculate the percent yield of carbon dioxide using the following equation Percent yield of CO2 = 61.5% .
What is carbon dioxide?Carbon dioxide (CO2) is a colorless, odorless gas composed of one carbon atom and two oxygen atoms. It exists in the Earth's atmosphere as a trace gas, making up approximately 0.04% of the atmosphere by volume. In nature, it is produced by the respiration of living organisms and through the decay of organic matter. It is also a byproduct of many human activities such as burning fossil fuels, producing cement, and manufacturing plastic. Carbon dioxide is an important greenhouse gas, which means it absorbs and traps heat in the atmosphere, resulting in global warming.
The given reaction is:
CH3CH2CH3 + O2 → CO2 + H2O
Given:
m(octane) = 20.6 g
m(O2) = 98.6 g
m(CO2) = 29.2 g
Using the given information and the balanced equation, we can determine the theoretical yield of carbon dioxide by using the following equation:
m(CO2) (theoretical) = (m(octane) × molar mass of octane) / molar mass of CO2
m(CO2) (theoretical) = (20.6 g × 72 g/mol) / 44 g/mol
m(CO2) (theoretical) = 47.45 g
To learn more about carbon dioxide
https://brainly.com/question/30192582
#SPJ9
Explain how matter relates to life
Answer:
matter are anything that has space
You have 2 sets of elements:
Set 1: fluorine, chlorine, and bromine (F, Cl, & Br)
Set 2: nitrogen, oxygen, and fluorine (N, O, & F)
Which of these two sets would you expect to be more similar in terms of properties? Explain why.
"Set 2 (N, O, & F) would be more similar in terms of properties.
This is because elements in the same group (column) of the periodic table generally have similar properties due to their similar electron configurations. Fluorine (F) is in Group 17 (the halogens) of the periodic table, and chlorine (Cl) and bromine (Br) are also halogens, which means they have similar properties such as being highly reactive and forming acidic compounds.
Nitrogen (N), oxygen (O), and fluorine (F) are all located in Group 16 (the chalcogens) and Group 17 (the halogens) of the periodic table, respectively. While nitrogen is not a halogen, it is located just above Group 17, and oxygen and fluorine are halogens. Elements in Group 16 and 17 share similar chemical properties such as high electronegativity and the tendency to form covalent bonds.
Therefore, because elements in the same group of the periodic table have similar properties, we would expect Set 2 to be more similar in terms of properties than Set 1. Specifically, nitrogen, oxygen, and fluorine are all nonmetals with relatively high electronegativities and the ability to form strong covalent bonds, which makes them more similar to each other than to the halogens in Set 1" (ChatGPT, 2023)
Alcohol is less dense than water. If you measured the mass of the same volume of alcohol and water
If you measured the mass of the same volume of alcohol and water, alcohol will weigh less than water.
Density and weightsIf you measured the mass of the same volume of alcohol and water, you would find that alcohol has a lower mass than water.
This is because alcohol is less dense than water, which means that a given volume of alcohol weighs less than the same volume of water.
For example, if you measure 1 liter of water and 1 liter of alcohol, you will find that the mass of the water is greater than the mass of the alcohol.
This is because water has a higher density than alcohol. The density of water is about 1 gram per cubic centimeter, while the density of alcohol is about 0.79 grams per cubic centimeter. Therefore, the mass of the same volume of alcohol is lower than the mass of water.
More on density can be found here: https://brainly.com/question/29775886
#SPJ1
Balance each of the following equations by writing the correct coefficient on the line.
A blank line = 1 or you can put in the 1 that is fine.
look at photo for reference
All I know about here..
How do you balance an equation with a coefficient?
Steps in Balancing a Chemical Equation
Count each type of atom in reactants and products. ...
Place coefficients, as needed, in front of the symbols or formulas to increase the number of atoms or molecules of the substances. ...
Repeat steps 1 and 2 until the equation is balanced.
Write the acidic equilibrium equation for C₃H₇COOH. Be sure to include the proper phases for all species within the reaction.
Propionic acid, C3H7COOH, has an equation for its acidic equilibrium that looks like this: C₃H₇COOH (aq) + H₂O (l) ⇌ C₃H₇COO⁻ (aq) + H₃O⁺ (aq).
Which three equilibrium equations are there?A system must satisfy the three equations of equilibrium, Sum Fx = 0, Sum Fy = 0, and Sum M = 0, in order to be in equilibrium. Start with the equations for the sum of the forces. Dividing the diagonal forces into their component parts would be the most straightforward technique to solve these force systems.
What is an illustration of a reaction in equilibrium?The chemical reaction between the reactants both before and after the reaction is complete is referred to as an equilibrium reaction (i.e., a thermodynamic equilibrium state). The evaporation of water into vapor is an illustration of an equilibrium reaction.
to know more about equilibrium equation here;
brainly.com/question/11028945
#SPJ1
if i have 0.56g of pure Fe, how many moles is this?
Answer:
.01
Explanation:
moles = mass / molar mass
mass of Fe = 0.56 g
molar mass of Fe = 55.85 g/mol
moles = 0.56 g / 55.85 g/mol
moles = 0.01 mol (rounded to two decimal places)
Therefore, 0.56 g of pure Fe is equal to 0.01 moles.
Moles of Pure Iron: 0.01
Synopsis: This question is asking how many moles of pure iron (Fe) are present in a sample that weighs 0.56 grams.
Numbered list format:
The question is asking about the number of moles of Fe in a sample.
The sample weighs 0.56 grams.
We need to calculate the number of moles using the formula: moles = mass/molar mass.
The molar mass of Fe is 55.85 g/mol.
Plug in the values to the formula: moles = 0.56 g / 55.85 g/mol.
Simplify the expression: moles = 0.01 mol.
Simple analogy: If you have a bag of 10 marbles and each marble weighs 1 gram, and you want to know how many marbles are in a bag that weighs 0.56 grams, you would divide the weight of the bag (0.56 grams) by the weight of one marble (1 gram) to find the number of marbles in the bag (0.56 marbles).
Summary: The question asks for the number of moles of pure Fe in a sample of 0.56g, which can be calculated by dividing the mass by the molar mass of Fe, giving a result of 0.01 mol.
The answer is 0.01 moles.
steps
moles = mass / molar mass
mass of Fe = 0.56 g
molar mass of Fe = 55.85 g/mol
moles = 0.56 g / 55.85 g/mol
moles = 0.01 mol (rounded to two decimal places)
Therefore, 0.56 g of pure Fe is equal to 0.01 moles.
Moles of Pure Iron: 0.01
Synopsis: This question is asking how many moles of pure iron (Fe) are present in a sample that weighs 0.56 grams.
Numbered list format:
The question is asking about the number of moles of Fe in a sample.
The sample weighs 0.56 grams.
We need to calculate the number of moles using the formula: moles = mass/molar mass.
The molar mass of Fe is 55.85 g/mol.
Plug in the values to the formula: moles = 0.56 g / 55.85 g/mol.
Simplify the expression: moles = 0.01 mol.
Simple analogy: If you have a bag of 10 marbles and each marble weighs 1 gram, and you want to know how many marbles are in a bag that weighs 0.56 grams, you would divide the weight of the bag (0.56 grams) by the weight of one marble (1 gram) to find the number of marbles in the bag (0.56 marbles).
Summary: The question asks for the number of moles of pure Fe in a sample of 0.56g, which can be calculated by dividing the mass by the molar mass of Fe, giving a result of 0.01 mol.
what is the answer
The answer is 0.01 moles.
show the math
Sure, here's the math:
moles = mass / molar mass
mass of Fe = 0.56 g
molar mass of Fe = 55.85 g/mol
moles = 0.56 g / 55.85 g/mol
moles = 0.01 mol (rounded to two decimal places)
Therefore, 0.56 g of pure Fe is equal to 0.01 moles.
ChatGPT
The identity of an unknown monoprotic organic acid is determined by titration. A 0.148 g sample of the acid is titrated with 0.159 M NaOH. What is the molar mass of the compound if 12.6 mL of the NaOH solution is required to neutralize the sample?
The molar mass of the unknown compound in 12.6 mL of NaOH solution is 74 g/mol.
First, we need to find the number of moles of NaOH used in titration
moles of NaOH = concentration x volume in liters
moles of NaOH = 0.159 mol/L x (12.6/1000) L
moles of NaOH = 0.0020014 mol
Since the acid is monoprotic, the number of moles of the acid is also 0.0020014 mol.
Now let us calculate its molar mass
molar mass = mass / moles
molar mass = 0.148 g / 0.0020014 mol
molar mass = 73.9 g/mol
Therefore, the molar mass of the unknown monoprotic organic acid is 73.9 g/mol.
To learn more about, molar mass of an unknown compound
https://brainly.com/question/10544148
To determine the molar mass of the unknown monoprotic organic acid, we need to use the information provided. We are given that 0.148 g of the acid is titrated with 0.159 M NaOH and it takes 12.6 mL of the NaOH solution to neutralize the sample. The molar mass of the compound is approximately 73.8 g/mol.
Explanation:To determine the molar mass of the unknown monoprotic organic acid, we need to use the information provided. We are given that 0.148 g of the acid is titrated with 0.159 M NaOH and it takes 12.6 mL of the NaOH solution to neutralize the sample. First, we need to calculate the moles of NaOH used by multiplying its molarity by its volume in liters:
Moles of NaOH = concentration * volume = 0.159 M * 0.0126 L = 0.0020046 moles
Since the acid is monoprotic (meaning it donates only one hydrogen ion), the number of moles of the acid is equal to the number of moles of NaOH used. Now, we can calculate the molar mass of the acid by dividing the mass of the acid by the moles:
Molar mass of acid = mass of acid / moles of acid = 0.148 g / 0.0020046 moles ≈ 73.8 g/mol
Learn more about Determining molar mass of an unknown organic acid here:https://brainly.com/question/33445730
#SPJ2
I need help with each one can you please show work
Answer:
1. 0.121 moles
2. 46.9 liters
3. 12.3 atm
4. 253 K
5. 0.552 g/L.
6. 22.8 g/mol.
7. 0.0494 moles
8. 5370 liters
9. 34.5 grams
10. helium
Explanation:
1. Using the ideal gas law equation, we can solve for the number of moles of oxygen:
PV = nRT
n = PV/RT
n = (1.2 atm) * (2.5 L) / [(0.0821 L atm/mol⚫K) * (298 K)]
n = 0.121 moles of oxygen
Therefore, 0.121 moles of oxygen will occupy a volume of 2.5 liters at 1.2 atm and 25°C.
2. Using the ideal gas law equation, we can solve for the volume of nitrogen:
PV = nRT
V = nRT/P
V = (2.0 moles) * (0.0821 L atm/mol⚫K) * (293 K) / (720 Torr)
V = 46.9 L
Therefore, 2.0 moles of nitrogen will occupy a volume of 46.9 liters at 720 Torr and 20°C.
3. Using the ideal gas law equation, we can solve for the pressure of CO:
PV = nRT
P = nRT/V
n = (25 g) / (28.01 g/mol) = 0.892 mol
P = (0.892 mol) * (0.0821 L atm/mol⚫K) * (298 K) / (0.5 L)
P = 12.3 atm
Therefore, 25 g of CO will exert a pressure of 12.3 atm at a temperature of 25°C and a volume of 500 mL.
4. Using the ideal gas law equation, we can solve for the temperature of Cl:
PV = nRT
T = PV/nR
n = (5.00 g) / (35.45 g/mol) = 0.141 mol
T = (900. Torr) * (0.750 L) / (0.141 mol) / (0.0821 L atm/mol⚫K)
T = 253 K
5. Therefore, 5.00 g of Cl will exert a pressure of 900. Torr at a volume of 750 mL at a temperature of 253 K.
Using the ideal gas law equation, we can solve for the density of NH3:
PV = nRT
n/V = P/RT
n/V = (800 Torr) / [(0.0821 L atm/mol⚫K) * (298 K)]
n/V = 0.0324 mol/L
The molar mass of NH3 is 17.03 g/mol, so the density of NH3 is:
density = (0.0324 mol/L) * (17.03 g/mol) = 0.552 g/L
Therefore, the density of NH3 at 800 Torr and 25°C is 0.552 g/L.
6. We can use the ideal gas law to calculate the number of moles of the gas and then divide the mass of the gas by the number of moles to get the molecular mass.
PV = nRT
n = PV/RT
n = (1.2 g/L) / [(0.0821 L atm/mol⚫K) * (293 K) * (745. Torr / 760 Torr)]
n = 0.0526 mol
The mass of the gas is 1.2 g, so the molecular mass is:
molecular mass = 1.2 g / 0.0526 mol = 22.8 g/mol
Therefore, the molecular mass of the gas is 22.8 g/mol.
7. Using the ideal gas law equation, we can solve for the number of moles of nitrogen gas:
PV = nRT
n = PV/RT
n = (6680 Torr) * (0.347 L) / [(0.0821 L atm/mol⚫K) * (300 K)]
n = 0.0494 moles of nitrogen gas
Therefore, 0.0494 moles of nitrogen gas will occupy a volume of 347 mL at 6680 Torr and 27°C.
8. We can use the ideal gas law to calculate the volume of hydrogen:
PV = nRT
V = nRT/P
n = (454 g) / (2.016 g/mol) = 225 mol
V = (225 mol) * (0.0821 L atm/mol⚫K) * (298 K) / (1.05 atm)
V = 5370 L
Therefore, 454 grams (1 lb.) of hydrogen will occupy a volume of 5370 liters at 1.05 atm and 25°C.
9. Using the ideal gas law equation, we can solve for the number of moles of CO:
PV = nRT
n = PV/RT
n = (785 Torr) * (32.5 L) / [(0.0821 L atm/mol⚫K) * (305 K)]
n = 1.23 moles of CO
The molar mass of CO is 28.01 g/mol, so the mass of CO is:
mass = (1.23 moles) * (28.01 g/mol) = 34.5 g
10. Therefore, 34.5 grams of CO will exert a pressure of 785 Torr at a volume of 32.5 L and a temperature of 32°C.
Using the ideal gas law equation, we can solve for the identity of the gas:
PV = nRT
n = PV/RT
n = (758 Torr) * (58.4 L) / [(0.0821 L atm/mol⚫K) * (275.5 K)]
n = 2.93 moles of gas
The mass of the gas is 10.3 g, so the molecular mass is:
molecular mass = 10.3 g / 2.93 mol = 3.52 g/mol
Looking at the periodic table, we see that the only element with a molecular mass close to 3.52 g/mol is helium, which has a molecular mass of 4.00 g/mol. Therefore, the gas is likely helium.
Consider the following reaction:
Al+3CuCl →→ AlCl3 + 3Cu
Identify what main category of reaction it is. If possible, further categorize it into all other relevant types
of reaction.
Synthesis
Decomposition
Combustion
Single Replacement
Double Replacement
Precipitation
Acid-Base
Oxidation-Reduction
Gas Evolving
The given reaction: Al + 3CuCl → AlCl₃ + 3Cu is a single replacement reaction.
In this reaction, aluminum (Al) replaces copper (Cu) in copper chloride (CuCl) to form aluminum chloride (AlCl₃) and copper (Cu).
Further categorizing it based on other types of reactions:
Oxidation-Reduction: The reaction is an example of oxidation-reduction or redox reaction as aluminum undergoes oxidation, losing electrons, while copper in CuCl is reduced, gaining electrons, during the reaction.
Metal displacement: It is also an example of a metal displacement reaction, as aluminum displaces copper from the copper chloride compound.
Single Displacement: It is a type of single displacement reaction because a single element (Al) replaces another element (Cu) in a compound (CuCl).
Exothermic: The reaction is exothermic because it releases heat energy during the reaction.
Non-Spontaneous: The reaction is non-spontaneous because it requires an external energy source (such as heating) to start the reaction.
Learn more about Oxidation-Reduction here:
https://brainly.com/question/28216195
#SPJ1
What is The oxidation half reaction for F^- + CLO3^- ==> F2 + CL^-
Reactants -> Products
The oxidation half reaction is;
2F^-(aq) ----> F2 (g) + 2e. This is an oxidation because there is the loss of two electrons.
What is oxidation half reaction?An oxidation half-reaction is a chemical reaction that involves the loss of electrons by an atom, ion, or molecule. In other words, it is a reaction where a substance undergoes oxidation by losing one or more electrons.
We can see that in the oxidation half equation that have been shown there can be seen to be the loos of about two electrons in the half equation;
2F^-(aq) ----> F2 (g) + 2e
Hence, this is the oxidation half equation.
Learn more about half reaction:https://brainly.com/question/10668307
#SPJ1
Provide the equation for the hydrolysis of propyl propanoate. Provide the equation for the hydrolysis N, N-dimethyl propanamide.
IF POSSIBLE MUST BE DONE ASAP.
Answer:
The hydrolysis reaction of propyl propanoate is as follows:
Propyl propanoate + Water → Propanoic acid + Propanol
The balanced chemical equation for this reaction is:
CH3CH2COOCH2CH2CH3 + H2O → CH3CH2COOH + CH3CH2CH2OH
The hydrolysis reaction of N, N-dimethyl propanamide is as follows:
N, N-dimethyl propanamide + Water → Propanoic acid + Dimethylamine
The balanced chemical equation for this reaction is:
CH3CH2CON(CH3)2 + H2O → CH3CH2COOH + (CH3)2NH
PLEASEEEEEEEEEEEEEEEEEEEE HELP WILL GIVE A BRAINLIST !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Wet Lab: Investigating Fields
Points Possible: 50
In this lab, you will explore magnetic and electric forces. You will gather data to show how these noncontact forces affect objects in fields. You will investigate the magnetic field between two bar magnets. You will also investigate the electric field between two electrically charged pieces of tape. The tape will become charged when you peel it off another object.
Part 1: Exploring Magnetic Fields (16 points)
1. Tape one magnet to a smooth, flat surface. Place the other magnet on that surface 10 cm away, oriented so that its north pole is facing the south pole of the other magnet. Slowly push the free magnet toward the magnet that is taped down. What do you observe? (1 point)
2. Gently push the free magnet toward the taped magnet again. How far apart are they when the free magnet first starts to be pulled? Use the ruler to measure the distance between the magnets. (1 point)
3. Repeat Steps 1 and 2, but this time, position the magnets so that their north poles are facing each other. At what distance do the magnets begin to repel each other? (2 points)
4. Place the free magnet in each of the positions shown in the table below. For each position, describe what happens after you let go of the magnet. Draw a diagram that shows the final positions of both magnets. Make sure to label the north pole (N) and south pole (S) of each magnet. (12 points)
Magnetic Fields Data Table
Original magnet positions Final magnet positions Observations
Magnet diagram
Magnet diagram
Magnet diagram
Magnetic diagram
Magnetic diagram
Magnet diagram
Part 2: Exploring Electric Fields (16 points)
5. Cut four pieces of tape that are 15 cm long. Fold over one end of each piece of tape to make a tab that is about 2 cm long.
6. Stick one piece of tape to the top of a smooth, flat table. Using a marker, label the tab "B1." Rub the tape with the side of the marker to smooth out any air bubbles. Stick a second piece of tape on top of the first and smooth out the air bubbles again. Label the tab of this piece "T1."
7. Repeat Steps 5 and 6 with the remaining two pieces of tape, but label the bottom tab "B2" and the top tab "T2."
8. Use the tab to peel T1 off of B1. Stick it vertically to the edge of the table so that the tab is at the top and the tape hangs down below the table. Then peel B1 off the table. Hang it from the table edge in the same way. The two pieces of tape must be at least 10 cm away from each other and from the legs of the table.
9. Peel off T2. Hold it by the tab with the sticky side facing you.
10. With your other hand, hold a ruler perpendicular to the table edge, with the zero mark against the table next to the tape labeled T1. Hold the tab of T2 at the other end of the ruler. The diagram shows how to arrange the tape and the ruler. Slowly move T2 along the ruler toward T1. Watch for a change at the bottom end of each piece of tape. Measure the distance between the top ends of the pieces of tape when you first notice the change. What happened? Continue moving T2 closer to T1. What happened? Record the distance and your observations in the Electric Fields Data Table provided below Step 12. (4 points)
Diagram of electrical fields experiment, with table, ruler, and tape. Text: Table, Ruler, T1, B1, T2.
11. Repeat Step 10, this time moving T2 toward the hanging piece of tape labeled B1. (4 points)
12. If any of the pieces of tape are stuck together, carefully pull them apart. Discard the piece of tape labeled T2. Then repeat Steps 9 – 11 using the piece labeled B2 that is still stuck to the tabletop. (8 points)
Electric Fields Data Table
Pieces of tape Distance of first change (cm) Observations
T1 and T2
B1 and T2
T1 and B2
B1 and B2
Analysis and Conclusions (18 points)
1. What can you conclude about magnetic force based on your results in Steps 1 – 3? Use your data to support your conclusions. (4 points)
2. A magnetic field is the area around a magnet where its force can be felt. Magnetic fields are invisible. How did Part 1 of the Procedure and Data section provide evidence that magnetic fields exist? (4 points)
3. How could you change the design of the experiment to determine the size of the magnetic field around the magnet that was taped down? (2 points)
4. In Part 2 of the Procedure and Data section, how did the pieces of tape affect each other? Why did they attract, repel, or have no effect on each other? (4 points)
5. Like magnetic fields, electric fields are invisible. How did the experiment allow you to gather evidence that electric fields exist? (4 points)
The free magnet will gradually feel a pull toward the magnet that is fixed when it is brought slowly toward the magnet that is affixed.
What is in a magnetic field?Inside an iron rod, there are hardly any magnetism regions. When a powerful magnet is present, these domains align with the preponderance of the north seeking ends going in the same direction. This occurrence causes the polarities to be different. A magnet has a pole that faces south on one end and a pole that faces north on the other. Because the Antarctic area has historically been referred to as the South Pole and because the Earth is thought to contain a strong magnet, this phrase is used as a point of reference.
Two magnet magnets that are opposed to one another are attracted to one another. When like sides are forced together, a force of repulsion is produced. In a magnetic field, opposite poles attract and similar poles resist one another.
The free magnet will gradually experience a draw to the magnet that is fixed when it is gently moved toward the magnet that is fixed and taped. The power of attraction grows as the opposite sides get closer to one another.
Learn more here magnetic field
https://brainly.com/question/14848188
#SPJ1