How many milliliters of a 0. 8 M solution of citric acid would be needed to react with 15 grams of baking soda? Please show work

1.8 is the pH during the titration of 20.00 mL of 0.1000 M HCOOH (formic acid) with 0.1000 M NaOH (aq) after 19.55 mL of the base have been added

This can be calculated using the equation below:

pH = -log10([H+])

Where [H+] is the concentration of H+ ions, given by the formula:

[H+] = Ka * [HCOOH] / (Ka + [NaOH])

Ka is the acid dissociation constant of formic acid, which is 1.7 × 10-4.

Using the above equation and data, we can calculate the pH during the titration of 20.00 mL of 0.1000 M HCOOH with 0.1000 M NaOH after 19.55 mL of the base have been added as follows:

[H+] = 1.7 x 10-4 * 0.1000 / (1.7 x 10-4 + 0.1000) = 0.0156 M

Therefore, pH = -log10 (0.0156) = 1.8

Hence , the pH during given titration is 1.8 .

To know more about Titration please visit :

https://brainly.com/question/13307013

#SPJ11

Cold air should have been shows advancing toward warm air, causing the warm air to sink.

Molarity, also known as molar concentration, is a unit of measurement used to express the concentration of a solution. It is defined as the number of moles of a solute dissolved in one liter of solution. The unit of molarity is moles per liter (mol/L), also written as M. For example, a solution with a molarity of 0.1 M contains 0.1 moles of solute per liter of solution. Molarity is commonly used in chemistry and biochemistry to describe the concentration of solutions in experiments and industrial processes.

To know more about molarity,

https://brainly.com/question/8732513

#SPJ9

Complete question:

A student draws a model for a front that would bring heavy rainfall to an area. The diagram shows the model drawn by the student. The student made an error in the model. Which of these statements corrects the error in the model?

Steel fibers bridge the crack at very small crack openings, transfer stresses and develop post crack strength in the concrete.

Nowadays, flexural strength, crack resistance, and explosion resistance are increased by using short length steel wire or thin steel sheets. Steel fibre is the name of this unique reinforcement, and the resulting concrete is steel fibre reinforced concrete.

In order to study the effects of steel fibre and the volume content ratio of fibre on the compressive, splitting, and tensile strengths of high-strength lightweight aggregate concrete (HLAC), three different types of steel fibers—micro (M), end-hooked (H), and corrugated (C)—that are frequently used in engineering applications are added to HLAC.

To know more about Steel fibers visit:-

brainly.com/question/28024695

#SPJ1

We need 25.196 grams of acetic acid to prepare the solution.

To calculate the mass of acetic acid needed for the solution, we can use the following equation:

mass = moles x molecular weight

where moles = Molarity x Volume (in liters).

In this case, we know that the molarity of acetic acid (also known as ethanoic acid) is 0.839 M and the total volume of the solution is 0.500 L. Therefore, the number of moles of acetic acid needed is:

moles = 0.839 M x 0.500 L = 0.4195 moles

Next, we can use the molecular weight of acetic acid (60.05 g/mol) to calculate the mass of acetic acid needed:

mass = 0.4195 moles x 60.05 g/mol

= 25.196 g

To know more about acetic acid here

https://brainly.com/question/12924347

#SPJ4

The molarity (M) of a solution is defined as the number of moles of solute dissolved in one liter of solution. the molarity of the solution is 0.744 M.

We can use the formula:

M = moles of solute / volume of solution (in liters)

to calculate the molarity of the solution.

Given that 0.45 moles of solute are dissolved to make 605.0 mL of solution, we first need to convert the volume to liters by dividing by 1000:

605.0 mL / 1000 mL/L = 0.605 L

Now we can use the formula to calculate the molarity:

M = 0.45 moles / 0.605 L = 0.744 M

Molarity is a commonly used unit of concentration in chemistry, and it represents the number of moles of solute present in one liter of solution. Molarity is a useful way to express the concentration of a solution because it is independent of temperature and pressure, and it is directly proportional to the amount of solute present in the solution.

learn more about molarity here:

https://brainly.com/question/8732513

#SPJ4

Answer:

Milk

Explanation:

We aren't given the temperature and pressure conditions, so we must assume standard conditions of room temperature and 1 atmoshere pressure.

ice cubes   NO.  By definition, they are solid water.

milk            YES, it is an emulsion, but still a liquid (not a solution)

rock           NO, unless it is coming from a volcano

fog             No, fog is small condensed water vapor droplets.

rain            No, liquid

oxygen     No, gas

Plants that have evolved to surviving in aquatic settings are known as aquatic plants (saltwater or freshwater).

Aquatic plants offer a source of sustenance, a habitat, a way to get rid of carbon dioxide, and a way to make air through photosynthesis. Since they create sustenance for both themselves and the consumers or creatures in an environment, plants serve as its producers.

Aquatic plants do not require a solid stalk because of their buoyancy in the water. Instead, they are held erect by flotation devices like gas-filled stomata and intercellular spaces, which also allow them to develop toward the water's top and receive enough sunshine for photosynthesis.

Learn more about   aquatic plants

https://brainly.com/question/16875901

#SPJ1

Answer:

Explanation:

Al(ClO2)3

Answer:

I think...

Locked away in glaciers and ice caps.

Answer:

The correct answer is B.

Explanation:

The mass in the wax candle transforms into a gas that is released when burned, hence the lower mass after the reaction.

Burning a candle involves a chemical reaction in which the wax in the candle reacts with oxygen in the air to produce carbon dioxide and water vapor. During this reaction, some of the wax is transformed into a gas, which is released into the air. This means that the total mass of the reactants (wax and oxygen) is greater than the total mass of the products (carbon dioxide, water vapor, and unreacted oxygen), resulting in a lower mass after the reaction.

This is consistent with the Law of Conservation of Mass, which states that the total mass of the reactants is equal to the total mass of the products in a chemical reaction. However, it is important to note that in this case, the mass loss is due to the release of gas, rather than a violation of the law of conservation of mass.

In mathematics, a dimension is the length or width of an area, region, or place in one way.

The minimal number of numbers required to describe any location within a mathematical space (or object) is known as the dimension in physics and mathematics.  Because only one coordinate is required to describe a position on a line, such as the point at 5 on a number line, a line is said to have one dimension (1D).

Because two coordinates are necessary to define a point on a surface, such as the perimeter of a sphere or cylinder, it is referred to as having a dimension of two (2D). For instance, a point on the surface of a sphere requires both a latitude and a longitude to be located.

learn more about dimension

https://brainly.com/question/28688567

#SPJ1

The elements when matched with their possible uses, gives us :

Oxygen is an essential element for combustion or burning. Sulfur is used in the production of sulfuric acid, which is a key ingredient in the manufacture of fertilizers, detergents, and other chemicals.

Selenium is used in the manufacture of photocopiers and other electronic devices. Tellurium is used in the production of special types of stainless steel that are highly resistant to corrosion. Polonium is a highly radioactive element that is used in some industrial applications, such as in the production of nuclear batteries.

Find out more on sulfur at https://brainly.com/question/2807773

#SPJ1

Oxidation is the process of using oxygen to break down organic compounds in the water, such as certain chemicals, pesticides, and metals. This helps to make.

Oxygen is an essential element for all living things. It is a colorless, odorless, tasteless gas found naturally in air and is the most abundant element in the Earth’s atmosphere. Oxygen is a key component in the respiration process, allowing organisms to convert the energy stored in food into energy they can use. Without oxygen, life as we know it would cease to exist. Oxygen is also necessary for combustion, which allows us to use fire and fuel to power our homes, cars, and other technology. Oxygen is an incredibly important element and without it, nothing could survive.

1. Filtration: Filtration is an important step in treating water to make it safe for drinking. It involves passing the water through a filter to remove any impurities, such as dirt and other particles.

2. Disinfection: Disinfection is the process of using chemicals, such as chlorine, to kill any bacteria and other microorganisms in the water. This is an important step for making water safe for drinking.

3. pH Adjustment: pH is a measure of the acidity or alkalinity of a solution. If the pH of the water is not within the safe range, it can be adjusted using chemicals to make it safe for drinking.

4. Coagulation and Flocculation: Coagulation and flocculation involve adding chemicals to the water to bind together particles of dirt and other impurities. This makes it easier to remove them during the filtration process.

To learn more about oxygen

https://brainly.com/question/28009615

#SPJ9

The purpose of choosing two different metals as the reference to measure relative reduction potentials.

The process of determining the reduction potential of a metal necessitates the use of another metal for reference. A reference electrode with a well-known reduction potential is paired with the metal being studied as the working electrode to determine the reduction potential of the metal being studied.

There are a variety of reference electrodes available, but the standard hydrogen electrode is typically used as the reference electrode for electrochemical studies.

The standard hydrogen electrode's reduction potential has been calculated to be 0 volts. The reduction potential of a metal is a measure of the metal's tendency to gain electrons when it comes into touch with another substance. When a metal is oxidized or reduced, its reduction potential varies. As a result, when measuring reduction potentials, it is necessary to use two different metals as references.

Learn more about reduction potential on:

https://brainly.com/question/20040177

#SPJ11

Answer:

The answer is B!

Explanation:

Its a Neutral Atom.

Answer:

When this mixture is supplied at a total pressure of 7.8 atm, the partial pressure of oxygen will be 0.0198 atm.

The amount of pressure that each gas in a mixture exerts is referred to as "partial pressure." This is found by using the formula, Partial pressure = Mole fraction × Total pressure.

Explanation:

The error that has to be corrected is that minerals and rocks both have unique chemical compositions. The right answer is C.

Our bodies need minerals for appropriate growth and function; they can be found in food and on the planet. In contrast to rocks, minerals typically have distinct chemical compositions. Hence, the proper option is C. The chemical makeup of a rock mass is a key determinant in the creation of minerals inside the mass, as a specific mineral can only develop when the required elements are present. Quartz, feldspar, mica, amphibole, olivine, and calcite are examples of common minerals. A rock is an assemblage of one or more minerals, or a body of undifferentiated mineral materials.

Learn more about minerals here:

https://brainly.com/question/26065363

#SPJ4

Complete Question:

The following table was made to compare rocks and minerals. What information in the table needs to be corrected?

A. Rocks do have specific chemical compositions and minerals do not have specific chemical compositions.

B. Rocks include granite and marble, minerals include quartz and diamond.

C. Rocks do have specific chemical compositions and minerals do as well.

D. Rocks include quartz and diamond; minerals include granite and marble.

The temperature of 4.5 moles of nitrogen gas when it has a pressure of 4.5 atm and a volume of 3L is 36.6 K.

PV = nRT is the formula for the ideal gas equation. In this equation, P denotes the ideal gas's pressure, V the volume of the ideal gas, n the total amount of ideal gas measured in moles, R the universal gas constant, and T the temperature.

We have,

PV = nRT

4.5 x 3 = 4.5 x 0.082 x T

T = 3/0.082

T = 36.6 K

An equation that matches the product of a gas's pressure and volume to the product of its thermodynamic temperature and the gas constant. For an ideal gas, the equation is accurate, but for actual gases at low pressures, it is a decent approximation. Also known as the ideal gas equation and the ideal gas law.

Numerous gases, including nitrogen, oxygen, hydrogen, noble gases, heavier gases like carbon dioxide, and mixes like air, can be regarded as ideal gases within tolerable tolerances across a wide parameter range centred on normal temperature and pressure.

Learn more about Temperature:

https://brainly.com/question/29501793

#SPJ4

Answer:

To calculate the number of moles of HCl in the solution, we can use the formula:

moles = concentration x volume

where concentration is in units of moles per liter (M), and volume is in units of liters (L).

Converting the given volume to liters:

266 mL = 266/1000 L = 0.266 L

Substituting the given values into the formula:

moles = 0.260 M x 0.266 L

moles = 0.06896 mol

Therefore, the number of moles of HCl in the solution is 0.06896 mol (rounded to five significant figures).

One approach to stop wind erosion is for construction workers to moisten the ground before driving on it or digging.

Wind has the power to transfer little sand grains and other debris kilometres from their original site. It may also remove layers of sediment and dirt off the top of a landscape. By scraping against the surface or shattering into smaller pieces as they travel, the materials carried by the wind degrade the soil while they are deposited in new areas.

Impacts. Economic, health, and environmental costs associated with wind erosion include soil loss, high cleaning costs, absenteeism, transportation delays, sand-blasted crops, and retail losses.

To know more about wind erosion visit:-

https://brainly.com/question/11506364

#SPJ1

Explanation:

The reaction between magnesium ribbon and dilute hydrochloric acid is a classic example of a single replacement reaction, which can be represented by the following chemical equation:

Mg (s) + 2HCl (aq) → MgCl2 (aq) + H2 (g)

In this reaction, magnesium (Mg) reacts with hydrochloric acid (HCl) to form magnesium chloride (MgCl2) and hydrogen gas (H2).

The rate of this reaction can be altered by changing the concentration of the hydrochloric acid. This is because the rate of a chemical reaction depends on the concentration of the reactants. Specifically, the rate of the reaction is proportional to the concentration of the reactants raised to some power, which is determined by the reaction's rate law.

In this reaction, the rate law can be expressed as:

Rate = k [Mg] [HCl]^x

Where k is the rate constant and x is the order of the reaction with respect to hydrochloric acid. The order of the reaction with respect to magnesium is one, since the concentration of magnesium does not change during the reaction.

When the concentration of hydrochloric acid is increased, the rate of the reaction increases because there are more hydrochloric acid molecules available to collide with magnesium atoms and react. This means that the value of x is greater than zero and the reaction is dependent on the concentration of hydrochloric acid.

Conversely, when the concentration of hydrochloric acid is decreased, the rate of the reaction decreases because there are fewer hydrochloric acid molecules available to react with magnesium. This means that the value of x is less than one and the reaction is not entirely dependent on the concentration of hydrochloric acid.

Answer:

An open flask half-filled with water at 25°C will eventually reach phase equilibrium as the water molecules at the surface evaporate and enter the air, while some air molecules dissolve into the water. Eventually, the rate of evaporation will equal the rate of condensation, and the system will reach dynamic equilibrium.

The time it takes to reach phase equilibrium depends on various factors such as the surface area of the water, the temperature, humidity, and air movement. In a still room with a moderate humidity level, it may take several hours for the water to reach phase equilibrium. However, in a hot, dry, and windy environment, the equilibrium could be reached much faster, perhaps in a matter of minutes.

Explanation:

Answer:

Option D is the answer of this question

Explanation:

0.100 L

Answer:

Explanation:

Ca++

CO3--

CaCO3

Answer:Let x be the oxidation station of sodium in Na

2

​

O

2

​

.

It contains a peroxide linkage in which each O atom has the oxidation number of -1.

2x+2(−1)=0

x=+1

Thus, the oxidation state of sodium in Na

2

​

O

2

​

 is +1.

Answer:

The chemical formula "4H3O2" represents four molecules of the compound H3O2.

The formula H3O2 can be written as (H2O) + H2O, meaning it is a combination of one water molecule (H2O) and an additional hydrogen ion (H+). The hydrogen ion (H+) is an atom of hydrogen that has lost its electron, so it has a charge of +1.

Each molecule of H3O2 contains two hydrogen atoms - one from the water molecule and one from the hydrogen ion. So, to find the total number of hydrogen atoms in 4H3O2, we need to multiply the number of hydrogen atoms per molecule by the number of molecules:

2 hydrogen atoms/molecule x 4 molecules = 8 hydrogen atoms

Therefore, there are 8 hydrogen atoms in the formula 4H3O2.

Explanation:

9. The equation that represents a double replacement reaction is option B. CaBr₂+Na₂C0₂ ⃗ CaCO₃+2NaBr. 10. The chemical equation that is balanced correctly is option C. B₂ O₃ + 2C - B₄C+CO. 11. An unbalanced chemical equation is shown below:

_H₃BO₃ - _B₂O₃ + H₂O. The coefficients of the balanced equation is option D. 3:2:2

The equation that represents a double replacement reaction is:

CaBr₂ + Na₂CO₃ → CaCO₃ + 2NaBr (Option B)

The balanced chemical equation is the one that has the same number of atoms of each element on both the reactant and product sides. Among the options provided, option A, B, and D are unbalanced equations, while option C is balanced. Therefore, option C is the correct answer.

The coefficients of the balanced chemical equation for the given unbalanced equation (_H₃BO₃ - _B₂O₃ + H₂O → ) are:

3H₃BO₃ - 2B₂O₃ + 3H₂O (Option D)

learn more about chemical equation: https://brainly.com/question/26694427

#SPJ1

Answer:2.78 moles water

50 g / 18 g water(get from the periodic table)

Explanation: